Enzymatic Treatment and Detoxification of Acid Orange 7 from Textile Wastewater

Proso millet peroxidase-mediated degradation and detoxification of Rhodamine B in water

Enzymatic catalysis is a promising approach for the degradation of organic pollutants and peroxidases (PODs) are one of the most common enzyme classes used to degrade organic pollutants. Proso millet peroxidase (PmPOD) is a peroxidase extracted and purified from proso millet bran which is the by-product of proso millet processing. In this study, we investigated the effects of PmPOD on the degradation of typical organic pollutants (Rhodamine B (RhB), bisphenol A, sulfadiazine) for the first time. Moreover, we screened RhB as the substrate with the best degradation effect. The degradation rate of RhB catalyzed by PmPOD (10 nM) reached 99.46% in 30 min under the optimal conditions (pH 5, 30°C, and molar ratio of RhB, H2O2 and HOBT of 1:9.58:1.94 × 10-3). The reaction kinetics parameters of PmPOD-mediated RhB degradation Km, Vmax and kcat were 62.2, 935.7 and 9.357 × 104, respectively. High-performance liquid chromatography analyses confirmed that PmPOD transformed RhB into two new products. Furthermore, toxicological evaluation in Caenorhabditis elegans demonstrated that 10 μg/mL RhB significantly reduced the lifespan by 8.3%, reduced the motility and pharynx-pumping rate compared with the control group, while the 10 μg/mL RhB product had no significant effect on these indexes. These data indicated that the toxicity of RhB disappeared after catalytic degradation by PmPOD. Taken together, these data suggest that catalysis of PmPOD is an effective method for degradation and detoxification of RhB. This study provides a potential candidate method for the biological treatment of RhB, and improves the added value of proso millet bran.

Identification of novel laccase from cyanobacterium Microcystis flos-aquae and enhanced azo dye bioremediation potential

Textile industries discharge up to 280,000 tons of dye waste annually, resulting in global pollution and health risks. In Nigeria and other African countries, persistent dyes threaten aquatic life and human health. This study introduces a cost-effective, enzyme-mediated bioremediation alternative using a novel laccase from the cyanobacteriumMicrocystis flos-aquae. This purified enzyme yielded 0.55 % (w/w)with significant activity at 40 °C and pH 4.00. Kinetic studies showed the dependence of M. flos-aquae laccase on Cu2+and its inhibition by EDTA and Fe2+. The efficacy of the enzyme was demonstrated through rapid decolorization of the azo dye Cibacron Brilliant Blue over a wide temperature and pH range. As this enzyme effectively decolorizes dyes across a broad temperature and pH range, it offers a promising solution for bioremediation of textile effluents.

Acid red 18 removal from aqueous solution by nanocrystalline granular ferric hydroxide (GFH); optimization by response surface methodology & genetic-algorithm

The need for fresh water is more than before by population growth, and industrial development have affected the quality of water supplies, one of the important reason for water contamination is synthetic dyes and their extensive use in industries. Adsorption has been considered as a common methods for dye removal from waters. In this study, Acid Red18 removal in batch mode by using Granular Ferric Hydroxide (GFH) was investigated. The GFH characterized by XRD, FESEM and FTIR analysis. Experiments were designed using RSM-CCD method. The maximum removal efficiency was obtained 78.59% at pH = 5, GFH dosage = 2 g/l, AR18 concentration = 77.5 mg/l and 85 min of contact time. Optimization with RSM and Genetic Algorithm carried out and is similar together. The non-linear adsorption Isotherm and kinetic fitted with Freundlich (R2 = 0.978) and pseudo-second-order (R2 = 0.989) models, respectively. Thermodynamic studies showed that the AR18 adsorption is endothermic process and GFH nature was found spontaneous.

Peroxidase enzymes as green catalysts for bioremediation and biotechnological applications: A review

The fast-growing consumer demand drives industrial process intensification, which subsequently creates a significant amount of waste. These products are discharged into the environment and can affect the quality of air, degrade water streams, and alter soil characteristics. Waste materials may contain polluting agents that are especially harmful to human health and the ecosystem, such as the synthetic dyes, phenolic agents, polycyclic aromatic hydrocarbons, volatile organic compounds, polychlorinated biphenyls, pesticides and drug substances. Peroxidases are a class oxidoreductases capable of performing a wide variety of oxidation reactions, ranging from reactions driven by radical mechanisms, to oxygen insertion into CH bonds, and two-electron substrate oxidation. This versatility in the mode of action presents peroxidases as an interesting alternative in cleaning the environment. Herein, an effort has been made to describe mechanisms governing biochemical process of peroxidase enzymes while referring to H₂O₂/substrate stoichiometry and metabolite products. Plant peroxidases including horseradish peroxidase (HRP), soybean peroxidase (SBP), turnip and bitter gourd peroxidases have revealed notable biocatalytic potentialities in the degradation of toxic products. On the other hand, an introduction on the role played by ligninolytic enzymes such as manganese peroxidase (MnP) and lignin peroxidase (LiP) in the valorization of lignocellulosic materials is addressed. Moreover, sensitivity and selectivity of peroxidase-based biosensors found use in the quantitation of constituents and the development of diagnostic kits. The general merits of peroxidases and some key prospective applications have been outlined as concluding remarks.

Overexpression of Cu/Zn Superoxide Dismutase (Cu/Zn SOD) in Synechococcus elongatus PCC 7942 for Enhanced Azo Dye Removal through Hydrogen Peroxide Accumulation

Discharge of recalcitrant azo dyes to the environment poses a serious threat to environmental health. However certain microorganisms in nature have developed their survival strategies by degrading these toxic dyes. Cyanobacteria are one such prokaryotic, photosynthetic group of microorganisms that degrade various xenobiotic compounds, due to their capability to produce various reactive oxygen species (ROS), and particularly the hydrogen peroxide (H2O2) when released in their milieu. The accumulation of H2O2 is the result of the dismutation of superoxide radicals by the enzyme superoxide dismutase (SOD). In this study, we have genetically modified the cyanobacterium Synechococcus elongatus PCC 7942 by integrating Cu/Zn SOD gene (sodC) from Synechococcus sp. PCC 9311 to its neutral site through homologous recombination. The overexpression of sodC in the derivative strain was driven using a strong constitutive promoter of the psbA gene. The derivative strain resulted in constitutive production of sodC, which was induced further during dye-treated growth. The genetically engineered Synechococcus elongatus PCC 7942 (MS-sodC+) over-accumulated H2O2 during azo dye treatment with a higher dye removal rate than the wild-type strain (WS-sodC-). Therefore, enhanced H2O2 accumulation through SODs overexpression in cyanobacteria may serve as a valuable bioremediation tool.

Methylene blue removal with ZnO coated montmorillonite: thermodynamic, kinetic, isotherm and artificial intelligence studies

In this study, montmorillonite clay was coated with zinc oxide (ZnO) nanoparticles. The study's primary aim is to investigate the adsorption properties of zinc oxide coated montmorillonite adsorbent against methylene blue (MB), and determine ZnO's effectiveness in adsorption. First, the surface properties of the ZnO-coated montmorillonite (ZnO/MMT) adsorbent were determined by FTIR Spectroscopy, XRD, and SEM/EDS. In the adsorption studies, the effects of different parameters such as contact time (5-150 min), adsorbent dosage (0.05-0.5 g), initial concentration (50-200 mg/L), temperature (298-318 K), and initial pH (4-12) were investigated. In addition, a fuzzy model was developed by using adsorption parameters so that the removal rates could be calculated more quickly. Adsorption kinetics and equilibrium results were explained by the pseudo-second-order model and the Langmuir isotherm model, respectively. The highest adsorption capacity was calculated as 384.62 mg/g at 318 K. The enthalpy value was calculated as 2.16 kJ/mol. The entropy value was calculated as 0.04 kJ/mol K. The negative entropy value in the thermodynamic parameters calculated at all temperatures shows that the adsorption was spontaneous. According to the data we obtained, ZnO/MMT nanoparticles can be successfully applied for MB removal from aqueous solutions.

Investigations on inhibitory effects of nickel and cobalt salts on the decolorization of textile dyes by the white rot fungus Phanerochaete velutina

Organic aromatic compounds used for dyeing and coloring in the textile industry are persistent and hazardous pollutants that must be treated before they are discharged into rivers and surface waters. Therefore, we investigated the potential of the white rot fungus Phanerochaete velutina to decolorize commonly used reactive dyes. The fungus decolorized in average 55% of Reactive Orange 16 (RO-16) after 14 days at a maximum rate of 0.09 d^-1 and a half-life of 8 days. Furthermore, we determined the inhibitory effects of co-present inorganic contaminants Nickel (Ni) and Cobalt (Co) salts on the decolorization potential and determined IC₅₀ values of 5.55 mg l^-1 for Co and a weaker inhibition by Ni starting from a concentration of 20 mg l^-1. In the decolorization assay for Remazol Brilliant Blue R (RBBR) we observed the interference of a metabolite of P. velutina, which did not allow us to investigate the kinetics of the reaction. The formation of the metabolite, however, could be used to obtain IC₅₀ values of 3.37 mg l^-1 for Co and 7.58 mg l^-1 for Ni. Our results show that living white rot fungi, such as P. velutina, can be used for remediation of dye polluted wastewater, alternatively to enzyme mixtures, even in the co-presence of heavy metals.

The optimization of enzymatic oxidation of levofloxacin, a fluoroquinolone antibiotic for wastetwater treatment

The global presence of antibiotics in the environment has created concerns about the emergence of antibiotic resistance bacteria and potential hazard to humans and the ecosystem. This work aims to study the removal of levofloxacin, a new generation fluoroquinolone antibiotic from aqueous solutions by enzyme mediated oxidation process and optimization of the conditions thereof by response surface methodology (RSM) using Box-Behnken design (BBD). For this study, experiments were conducted to analyze the effect of independent variables namely, pH, temperature, mediator concentration and antibiotic concentration on the degradation percentage of levofloxacin antibiotic using laccase enzyme derived from Trametes versicolor. The residual levofloxacin concentration was determined using high performance liquid chromatography (HPLC). On applying the quadratic regression analysis, among the main parameters, it was found that the percentage degradation was significantly affected by all the four variables. The predicted values for percentage degradation of levofloxacin were close to the experimental values obtained and the R² (0.95) indicated that the regression was able to give a good prediction of response for the percentage degradation of levofloxacin in the studied range. The optimal conditions for the maximum degradation (99.9%) as predicted by the BBD were: temperature of 37 °C, pH of 4.5, mediator concentration of 0.1 mM and levofloxacin concentration of 5 μg mL^-1. The findings of the study were further extended to study the effect of partially purified enzymes isolated from Pleurotus eryngii, Pleurotus florida and Pleurotus sajor caju on the degradation of levofloxacin at concentrations ranging from as low as 0.1 to as high as 50 µg mL^-1 in synthetic wastewater utilizing the optimized conditions generated by BBD. A maximum degradation of 88.8% was achieved with the partially purified enzyme isolated from Pleurotus eryngii at 1 µg mL^-1 levofloxacin concentration which was at par with the commercial laccase which showed 89% degradation in synthetic wastewater at the optimized conditions. The biodegradation studies were conducted using only 2 units of laccase. Thus, the expensive commercial laccase can be effectively replaced by crude laccase isolated from indigenous macrofungi such as P. eryngii, P. florida and P. sajor caju as a cost effective alternative to degrade levofloxacin present in contaminated wastewater using as low as 2 units of enzyme for a 72 h treatment period.

Evaluation of a magnetic coagulant based on Fe3O4 nanoparticles and Moringa oleifera extract on tartrazine removal: coagulation-adsorption and kinetics studies

The lack of data regarding the mechanisms at work in the coagulation processes of different substances using magnetic coagulants makes it difficult to understand the phenomena involved and, consequently, makes it difficult to elucidate the mechanisms involved in the coagulation process. Thus, the present study aimed at evaluating the performance of a magnetic coagulant composed of iron oxide (Fe₃O₄) functionalised with Moringa oleifera (MO) salt extract in the treatment of a synthetic food industry wastewater simulated by the addition of dye to distilled water. From the data obtained in the coagulation/flocculation assays followed by magnetic sedimentation, the different mechanisms involved were evaluated for their fit to pseudo-first order, pseudo-second order, Langmuir and Freundlich theoretical models. The adjustments to the models were evaluated from the kinetic data and indicated that at pH 3 the best fit was to the pseudo-second order model, whereas for pH 6 and 9 the best fit was for the pseudo-first order model. The isothermal data were adjusted to the Langmuir model, suggesting adsorption of a monolayer, characterising chemical processes with selective adsorption. In relation to the mechanisms involved in the process, it is suggested that the neutralisation of charges was the predominant mechanism in the removal of tartrazine at pH 3, whereas at the other pH values evaluated the mechanism that prevailed was monolayer adsorption. Thus, the proposed magnetic coagulant was found to be an efficient alternative material for tartrazine removal, allowing easy separation in the sedimentation stage while also being compatible with environmental issues.

Low-Temperature Synthesis of Magnetic Carbonaceous Materials Coated with Nanosilica for Rapid Adsorption of Methylene Blue

This work reports the synthesis of nanosilica-coated magnetic carbonaceous adsorbents (MCA@SiO₂) using low-temperature hydrothermal carbonization technique (HCT) and the feasibility to utilize it for methylene blue (MB) adsorption. Initially, a carbon precursor (CP) was synthesized from corn starch under saline conditions at 453 K via HCT followed by the magnetization of CP again via HCT at 453 K. Subsequently, MCA was coated with silica nanoparticles. MCA and MCA@SiO₂ were characterized using X-ray diffraction, Fourier transform infrared, scanning electron microscopy/energy-dispersive spectroscopy, transmission electron microscopy, and Brunauer-Emmett-Teller (BET) N₂ adsorption-desorption isotherms. The BET surface area of MCA and MCA@SiO₂ were found to be 118 and 276 m² g^-1, respectively. Adsorption of MB onto MCA@SiO₂ was performed using batch adsorption studies and in the optimum condition, MCA@SiO₂ showed 99% adsorption efficiency with 0.5 g L^-1 of MCA@SiO₂ at pH 7. Adsorption isotherm studies predicted that MB adsorption onto MCA@SiO₂ was homogeneous monolayer adsorption, which was best described using a Langmuir model with the maximum adsorption capacity of 516.9 mg g^-1 at 25 °C. During adsorption kinetics, a rapid dye removal was observed which followed pseudo-first- as well as pseudo-second-order models, which suggested that MB dye molecules were adsorbed onto MCA@SiO₂ via both ion exchange as well as the chemisorption process. The endothermic and spontaneous nature of the adsorption of MB onto MCA@SiO₂ was established by thermodynamics studies. Mechanism of dye diffusion was collectively governed by intraparticle diffusion and film diffusion processes. Furthermore, MB was also selectively adsorbed from its mixture with an anionic dye, that is, methyl orange. Column adsorption studies showed that approximately 500 mL of MB having 50 mg L^-1 concentration can be treated with 0.5 g L^-1 of MCA@SiO₂. Furthermore, MCA@SiO₂ was repeatedly used for 20 cycles of adsorption-desorption of MB. Therefore, MCA@SiO₂ can be effectively utilized in cationic dye-contaminated wastewater remediation applications.

Data on bioassay of toxicity reduction of treated textile wastewater by using nanophotocatalytic process by Daphnia magna

Practicability and possibility of photocatalytic degradation of Ro16 textile dye and the actual wastewater of textile were studied on pilot scale. The amount of reduction in solution toxicity was studied and assessed by the application of a bioassay using Daphnia magna. The solution toxicity at the beginning of the process has an increasing procedure and this is caused by the intermediate products that are produced during the photocatalytic process from the mother compounds, and are more toxic compared to them, and their toxicity declines at the end of the process with the completion of mineralization. The procedure of toxicity increase and its decrease in the course of photocatalytic process has a direct relation with the amount of mineralization.

Removal of Reactive Black 5 dye from aqueous solutions by coupled electrocoagulation and bio-adsorbent process

Background

Textile wastewater contains a significant amount of bio dye compounds including Reactive Black 5 (RB5) as an Azo dye that causes serious damage to the environment and aquatic life in receiving water resources. It is estimated that approximately 15% of the dyestuff is discharged into water bodies and 50% of those are Azo dyes.

Objective

The aim of this study was to examine the effectiveness of combining electrocoagulation and bio-adsorption methods using the active carbons from Kenya tea waste to remove RB5 from aquatic solutions.

Methods

Experiments were done in wastewater and the Wastewater laboratory of Gonabad University of Medical Sciences in 2017. Initially, iron electrodes were installed in a 1 L glass container and connected to electrical power with primary dye concentration of 500 mg/l, EC 1000-3000 μs/cm, adsorbent dosage of 0.2-1.0 mg/l, pH 2-9 and electrical potential 30 V. After that, the samples were collected at twenty-minute intervals until the eightieth minute. Performance of dye removal was measured using spectrophotometer techniques (597 nm). Finally, the data were analyzed by descriptive statistics using Microsoft Excel 2017 version.

Results

The findings of this study demonstrated that the highest simultaneous removal performance (96%) was obtained by pH 6, 80-minute reaction time, and EC 3000 μs/cm. With the increasing of reaction time, the energy consumption, electrodes wear, pH, final temperature of effluent, and removal efficiency would increase. Adsorption process could play a small role in the removal of the dye, while it was very effective in improving the performance of the electrocoagulation process.

Conclusion

A combination of the electrocoagulation and adsorption processes can be adopted as an efficient and economical way to treat effluents contaminated with dyestuff.

Data on effluent toxicity and physicochemical parameters of municipal wastewater treatment plant using Daphnia Magna

Toxicity of Municipal Wastewater Treatment Plant Effluent (MWWTPE) was evaluated using bioassay with Daphnia Magna (D. Magna). Acute toxicity tests were performed on effluent samples of Urmia municipal wastewater treatment plant (Biolac system) according to the USEPA methods and 24, 48, 72, and 96 hr lethal concentration 50% (LC₅₀) were calculated by application of Probit analysis. Also interrelationship between main effluent physicochemical parameters of wastewater (BOD₅, COD, and TSS) and 24hr-LC₅₀, were studied. Results showed that the effluent was safe to be discharged to the surface water in regard to physicochemical parameters and acute toxicity unit (TUa), according to the standards of Iranian Department of Environment (DOE). Relationship between effluent COD and 24hr-LC₅₀ show that, increase in effluent COD resulted in increase in wastewater toxicity and there was not relationship between BOD₅, TSS and toxicity of effluent.

Microbial decolorization and detoxification of emerging environmental pollutant: Cosmetic hair dyes

Since the usage of hair dyes has increased in recent time, the removal of residual dye from environment is also an emerging issue. Hair dye contains mixture of chemicals including genotoxic chemical, p-phenylenediamine (p-PD or PPD). The present study reports bioremediation of hair dye using bacteria isolated from saloon effluent. Sugarcane bagasse powder (SBP) was used as a source of nutrient and surface for bacterial growth. The 16S rDNA sequencing confirmed the isolate as Enterobacter cloacae which was designated as DDB I. The decolourization of dye was studied using UV-vis spectrophotometer. The detoxification study was conducted on microbes isolated from fresh ponds using well diffusion assay. The 1mg/ml of dye was effectively decolourised within 18h of DDB I treatment in the minimal medium containing 30mg/ml of SBP.

Hemin-bound cysteinyl bolaamphiphile self-assembly as a horseradish peroxidase-mimetic catalyst

A horseradish peroxidase (HRP) mimetic catalyst was constructed by tethering hemin to the cysteinyl bolaamphiphile assembly through thiol–Fe bond. The prepared catalyst showed high catalytic activity comparable to HRP even at the high temperature.

The study of non-linear kinetics and adsorption isotherm models for Acid Red 18 from aqueous solutions by magnetite nanoparticles and magnetite nanoparticles modified by sodium alginate

Azo dyes are widely used in various industries. These substances produce toxic byproducts in aquatic environments in addition to their mutagenic and carcinogenic potential effects. In this study, the effect of magnetite nanoparticles and magnetite nanoparticles modified by sodium alginate in batch systems and nonlinear kinetic and adsorption isotherm models were investigated. Magnetite nanoparticles were synthesized by chemical co-precipitation method and then modified and used as adsorbent to adsorb Acid Red 18. After determining the optimum pH and adsorbent dose, non-equilibrium models for kinetic adsorption were tested with concentrations (25–100 mg/L) and at eight different periods of time (1–15 min) and the pseudo-first-order and pseudo-second-order non-linear models were used to describe the results. For adsorption isotherm, a contact time of 120 min was studied in different concentrations (25–100 mg/L) and the residual concentration of Acid Red 18 was obtained. The results are described by non-linear Langmuir, Freundlich and Dubinin–Radushkevich isotherm models. The optimum amounts of pH for magnetite nanoparticles and for modified ones were 3 and 5, respectively, the efficiencies were 0.75 and 0.2 g/L, respectively. According to the results sodium alginate has a high performance in adsorption of Acid Red 18. Adjusted correlation coefficients and chi-square test showed that Freundlich isotherm and then Langmuir isotherm can well describe the experimental results. In Freundlich, the value of (Kf) was 3.231 (L/g) for magnetite nanoparticles and 21.615 (L/g) for modified adsorbent. In Langmuir, the value of (qm) was 16.259 (mg/g) for magnetite nanoparticles and 73.464 (mg/g) for modified adsorbent. Comparing the Langmuir maximum calculated adsorption capacity indicated that modified adsorbent can adsorb the pollutants 6.5 times more than the other one.

Studies on the laccase-mediated decolorization, kinetic, and microtoxicity of some synthetic azo dyes

BACKGROUND

Enzymatic elimination of synthetic dyes, one of the most environmentally hazardous chemicals, has gained a great interest during the two last decades. The present study was performed to evaluate the decolorization and detoxification potential of the purified laccase of Paraconiothyrium variabile in both non-assisted and hydroxybenzotriazole-aided form against six azo dyes.

RESULTS

The obtained results showed that Acid Orange 67, Disperse Yellow 79, Basic Yellow 28, Basic Red 18, Direct Yellow 107, and Direct Black 166 were decolorized up to 65.3, 53.3, 46.7, 40.7, 34, and 26.2 %, respectively, after 1 h treatment with laccase (0.5 U/mL). Addition of HBT up to 5 mM enhanced decolorization percent of all the investigated dyes. The results of kinetic study introduced the monoazo dye of Acid Orange 67 as the most suitable substrate for laccase with K m of 0.49 mM and V max of 189 mmol/min/mg. Evaluation the toxic effect of laccase-treated dye sample based on the growth inhibition of standard bacterial strains revealed decrease in toxicity of all applied dyes after treatment by laccase.

CONCLUSIONS

Application of the P. variabile laccase as biocatalyst efficiently decreased the toxicity of all studied synthetic azo dyes.

Enzymatic catalysis treatment method of meat industry wastewater using lacasse

BACKGROUND

The process of meat industry produces in a large amount of wastewater that contains high levels of colour and chemical oxygen demand (COD). So they must be pretreated before their discharge into the ecological system.

METHODS

In this paper, enzymatic catalysis (EC) was adopted to treat the meat wastewater.

RESULTS

Box-Behnken design (BBD), an experimental design for response surface methodology (RSM), was used to create a set of 29 experimental runs needed for optimizing of the operating conditions. Quadratic regression models with estimated coefficients were developed to describe the colour and COD removals.

CONCLUSIONS

The experimental results show that EC could effectively reduce colour (95 %) and COD (86 %) at the optimum conditions of enzyme dose of 110 U/L, incubation time of 100 min, pH of 7 and temperature of 40 °C. RSM could be effectively adopted to optimize the operating multifactors in complex EC process.

Immobilized laccase mediated dye decolorization and transformation pathway of azo dye acid red 27

BACKGROUND

Laccases have good potential as bioremediating agents and can be used continuously in the immobilized form like many other enzymes.

METHODS

In the present study, laccase from Cyathus bulleri was immobilized by entrapment in Poly Vinyl Alcohol (PVA) beads cross-linked with either nitrate or boric acid. Immobilized laccase was used for dye decolorization in both batch and continuous mode employing a packed bed column. The products of degradation of dye Acid Red 27 were identified by LC MS/MS analysis.

RESULTS

The method led to very effective (90%) laccase immobilization and also imparted significant stability to the enzyme (more than 70% after 5 months of storage at 4°C). In batch decolorization, 90-95% decolorization was achieved of the simulated dye effluent for up to 10-20 cycles. Continuous decolorization in a packed bed bioreactor led to nearly 90% decolorization for up to 5 days. The immobilized laccase was also effective in decolorization and degradation of Acid Red 27 in the presence of a mediator. Four products of degradation were identified by LC-MS/MS analysis.

CONCLUSIONS

The immobilized laccase in PVA-nitrate was concluded to be an effective agent in treatment of textile dye effluents.

Decolorization of anthraquinonic dyes from textile effluent using horseradish peroxidase: optimization and kinetic study

Two anthraquinonic dyes, C.I. Acid Blue 225 and C.I. Acid Violet 109, were used as models to explore the feasibility of using the horseradish peroxidase enzyme (HRP) in the practical decolorization of anthraquinonic dyes in wastewater. The influence of process parameters such as enzyme concentration, hydrogen peroxide concentration, temperature, dye concentration, and pH was examined. The pH and temperature activity profiles were similar for decolorization of both dyes. Under the optimal conditions, 94.7% of C.I. Acid Violet 109 from aqueous solution was decolorized (treatment time 15 min, enzyme concentration 0.15 IU/mL, hydrogen peroxide concentration 0.4 mM, dye concentration 30 mg/L, pH 4, and temperature 24°C) and 89.36% of C.I. Acid Blue 225 (32 min, enzyme concentration 0.15 IU/mL, hydrogen peroxide concentration 0.04 mM, dye concentration 30 mg/L, pH 5, and temperature 24°C). The mechanism of both reactions has been proven to follow the two substrate ping-pong mechanism with substrate inhibition, revealing the formation of a nonproductive or dead-end complex between dye and HRP or between H2O2 and the oxidized form of the enzyme. Both chemical oxygen demand and total organic carbon values showed that there was a reduction in toxicity after the enzymatic treatment. This study verifies the viability of use of horseradish peroxidase for the wastewaters treatment of similar anthraquinonic dyes.

Laccase-catalyzed decolorization and detoxification of Acid Blue 92: statistical optimization, microtoxicity, kinetics, and energetics

BACKGROUND

In recent years, enzymatic-assisted removal of hazardous dyes has been considered as an alternative and eco-friendly method compared to those of physicochemical techniques. The present study was designed in order to obtain the optimal condition for laccase-mediated (purified from the ascomycete Paraconiothyrium variabile) decolorization of Acid Blue 92; a monoazo dye, using response surface methodology (RSM). So, a D-optimal design with three variables, including pH, enzyme activity, and dye concentration, was applied to optimize the decolorization process. In addition, the kinetic and energetic parameters of the above mentioned enzymatic removal of Acid Blue 92 was investigated.

RESULTS

Decolorization of Acid Blue 92 was maximally (94.1% ± 2.61) occurred at pH 8.0, laccase activity of 2.5 U/mL, and dye concentration of 75 mg/mL. The obtained results of kinetic and energetic studies introduced the laccase-catalyzed decolorization of Acid Blue 92 as an endothermic reaction (Ea, 39 kJ/mol; ΔS, 131 J/mol K; and ΔH, 40 kJ/mol) with K m and V max values of 0.48 mM and 227 mM/min mg, respectively. Furthermore, the results of microtoxicity study revealed that the toxicity of laccase-treated dye was significantly reduced compared to the untreated dye.

CONCLUSIONS

To sum up, the present investigation introduced the Paraconiothyrium variabile laccase as an efficient biocatalyst for decolorization of synthetic dye Acid Blue 92.

Engineering a horseradish peroxidase C stable to radical attacks by mutating multiple radical coupling sites

Peroxidases have great potential as industrial biocatalysts. In particular, the oxidative polymerization of phenolic compounds catalyzed by peroxidases has been extensively examined because of the advantage of this method over other conventional chemical methods. However, the industrial application of peroxidases is often limited because of their rapid inactivation by phenoxyl radicals during oxidative polymerization. In this work, we report a novel protein engineering approach to improve the radical stability of horseradish peroxidase isozyme C (HRPC). Phenylalanine residues that are vulnerable to modification by the phenoxyl radicals were identified using mass spectrometry analysis. UV-Vis and CD spectra showed that radical coupling did not change the secondary structure or the active site of HRPC. Four phenylalanine (Phe) residues (F68, F142, F143, and F179) were each mutated to alanine residues to generate single mutants to examine the role of these sites in radical coupling. Despite marginal improvement of radical stability, each single mutant still exhibited rapid radical inactivation. To further reduce inactivation by radical coupling, the four substitution mutations were combined in F68A/F142A/F143A/F179A. This mutant demonstrated dramatic enhancement of radical stability by retaining 41% of its initial activity compared to the wild-type, which was completely inactivated. Structure and sequence alignment revealed that radical-vulnerable Phe residues of HPRC are conserved in homologous peroxidases, which showed the same rapid inactivation tendency as HRPC. Based on our site-directed mutagenesis and biochemical characterization, we have shown that engineering radical-vulnerable residues to eliminate multiple radical coupling can be a good strategy to improve the stability of peroxidases against radical attack.

Evaluation of textile dye degradation due to the combined action of enzyme horseradish peroxidase and hydrogen peroxide

The kinetic parameters of the oxidant action of the combination of enzyme horseradish peroxidase (HRP) with hydrogen peroxide in the degradation of methylene blue dye were investigated. Twenty-one percent of color removal was obtained at pH 5.0 and temperature of 30 °C. Under these conditions, the kinetic parameters K m and V max of enzymatic reactions were determined for hydrogen peroxide in the absence of methylene blue dye (K m = 17.3 mM; V max = 1.97 mM/min) and in the presence of methylene blue dye (K m = 0.27 mM, V max = 0.29 μM/min). By means of analysis of phosphorescence, the presence of reactive oxygen species was detected in the form of singlet oxygen through the redox reaction between HRP and hydrogen peroxide. The existence of this reactive species is directly dependent on the concentration of hydrogen peroxide in the aqueous solution.

Removal of phenol and bisphenol-A catalyzed by laccase in aqueous solution

BACKGROUND

Elimination of hazardous phenolic compounds using laccases has gained attention during recent decades. The present study was designed to evaluate the ability of the purified laccase from Paraconiothyrium variabile (PvL) for elimination of phenol and the endocrine disrupting chemical bisphenol A. Effect of laccase activity, pH, and temperature on the enzymatic removal of the mentioned pollutants were also investigated.

RESULTS

After 30 min treatment of the applied phenolic pollutants in the presence of PvL (5 U/mL), 80% of phenol and 59.7% of bisphenol A was removed. Increasing of laccase activity enhanced the removal percentage of both pollutants. The acidic pH of 5 was found to be the best pH for elimination of both phenol and bisphenol A. Increasing of reaction temperature up to 50°C enhanced the removal percentage of phenol and bisphenol A to 96.3% and 88.3%, respectively.

CONCLUSIONS

To sum up, the present work introduced the purified laccase of P. variabile as an efficient biocatalyst for removal of one of the most hazardous endocrine disruptor bisphenol A.

Decolorization of two synthetic dyes using the purified laccase of Paraconiothyrium variabile immobilized on porous silica beads

Background

Decolorization of hazardous synthetic dyes using laccases in both free and immobilized form has gained attention during the last decades. The present study was designed to prepare immobilized laccase (purified from Paraconiothyrium variabile) on porous silica beads followed by evaluation of both free and immobilized laccases for decolorization of two synthetic dyes of Acid Blue 25 and Acid Orange 7. Effects of laccase concentration, pH and temperature alteration, and presence of 1-hydroxybenzotriazole (HBT) as laccase mediator on decolorization pattern were also studied. In addition, the kinetic parameters (K_m and V_max) of the free and immobilized laccases for each synthetic dye were calculated.

Results

Immobilized laccase represented higher temperature and pH stability compare to free one. 39% and 35% of Acid Blue 25 and Acid Orange 7 was decolorized, respectively after 65 min incubation in presence of the free laccase. In the case of immobilized laccase decolorization percent was found to be 76% and 64% for Acid Blue 25 and Acid Orange 7, respectively at the same time. Increasing of laccase activity enhanced decolorization percent using free and immobilized laccases. Relative decolorization of both applied dyes was increased after treatment by laccase-HBT system. After nine cycles of decolorization by immobilized laccase, 26% and 31% of relative activity were lost in the case of Acid Blue 25 and Acid Orange 7, respectively.

Conclusions

To sum up, the present investigation introduced the immobilized laccase of P. variabile on porous beads as an efficient biocatalyst for decolorization of synthetic dyes.

Probing horseradish peroxidase catalyzed degradation of azo dye from tannery wastewater

Biocatalysis based effluent treatment has outclassed the presently favored physico-chemical treatments due to nil sludge production and monetary savings. Azo dyes are commonly employed in the leather industry and pose a great threat to the environment. Here, we show the degradation of C. I. Acid blue 113 using horseradish peroxidase (HRP) assisted with H₂O₂ as a co-substrate. It was observed that 0.08 U HRP can degrade 3 mL of 30 mg/L dye up to 80% within 45 min with the assistance of 14 μL of H₂O₂ at pH 6.6 and 30°C. The feasibility of using the immobilized HRP for dye degradation was also examined and the results show up to 76% dye degradation under similar conditions to that of free HRP with the exception of longer contact time of 240 min. Recycling studies reveal that the immobilized HRP can be recycled up to 3 times for dye degradation. Kinetics drawn for the free HRP catalyzed reaction marked a lower K_m and higher V_max values, which denotes a proper and faster affinity of the enzyme towards the dye, when compared to the immobilized HRP. The applicability of HRP for treating the actual tannery dye-house wastewater was also demonstrated.

Biodegradation of 2,4-dinitrophenol with laccase immobilized on nano-porous silica beads

Many organic hazardous pollutants, including 2,4-dinitrophenol (2,4-DNP), which are water soluble, toxic, and not easily biodegradable make concerns for environmental pollution worldwide. In the present study, degradation of nitrophenols-contained effluents by using laccase immobilized on the nano-porous silica beads was evaluated. 2,4-DNP was selected as the main constituent of industrial effluents containing nitrophenols. The performance of the system was characterized as a function of pH, contact time, temperature, pollutant, and mediator concentrations. The laccase-silica beads were employed in a mixed-batch reactor to determine the degradation efficiency after 12 h of enzyme treatment. The obtained data showed that the immobilized laccase degraded more than 90% of 2,4-DNP within 12 h treatment. The immobilization process improved the activity and sustainability of laccase for degradation of the pollutant. Temperatures more than 50°C reduced the enzyme activity to about 60%. However, pH and the mediator concentration could not affect the enzyme activity. The degradation kinetic was in accordance with a Michaelis-Menten equation with Vmax and Km obtained as 0.25-0.38 μmoles/min and 0.13-0.017 mM, respectively. The stability of the immobilized enzyme was maintained for more than 85% of its initial activity after 30 days. Based on the results, it can be concluded that high resistibility and reusability of immobilized laccase on CPC-silica beads make it considerable choice for wastewater treatment.

Decolorisation of Reactive Red 120 Dye by Using Single-Walled Carbon Nanotubes in Aqueous Solutions

Dyes are one of the most hazardous chemical compound classes found in industrial effluents and need to be treated since their presence in water bodies reduces light penetration, precluding the photosynthesis of aqueous flora. In the present study, single-walled carbon nanotubes (SWCNTs) was used as an adsorbent for the successful removal of Reactive Red 120 (RR-120) textile dye from aqueous solutions. The effect of various operating parameters such as initial concentration of dye, contact time, adsorbent dosage and initial pH was investigated in order to find the optimum adsorption conditions. Equilibrium isotherms were used to identify the possible mechanism of the adsorption process. The optimum pH for removing of RR-120 dye from aqueous solutions was found to be 5 and for this condition maximum predicted adsorption capacity for RR-120 dye was obtained as 426.49 mg/g. Also, the equilibrium data were also fitted to the Langmuir, Freundlich and BET equilibrium isotherm models. It was found that the data fitted to BET (R2=0.9897) better than Langmuir (R2=0.9190) and Freundlich (R2=0.8819) model. Finally it was concluded that the single-walled carbon nanotubes can be used for dye removal from aqueous solutions.

Biochemical response to exposure to six textile dyes in early developmental stages of Xenopus laevis

The present study was undertaken to determine the toxic effect of a lethal concentration of six different commercially used textile dyes on the 46th stage of Xenopus laevis tadpoles. The tadpoles were exposed to Astrazon Red FBL, Astrazon Blue FGRL, Remazol Red RR, Remazol Turquoise Blue G-A, Cibacron Red FN-3G, and Cibacron Blue FN-R for 168 h in static test conditions, and thus, 168-h median lethal concentrations (LC(50)s) of each dye were determined to be 0.35, 0.13, 112, 7, 359, and 15.8 mg/L, respectively. Also, to evaluate the sublethal effects of each dye, tadpoles were exposed to different concentrations of dyes (with respect to 168-h LC(50)s) for 24 h. The alteration of selected enzyme activities was tested. For this aim, glutathione S-transferase (GST), carboxylesterase, and lactate dehydrogenase (LDH) were assayed. After dye exposure, the GST induction or inhibition and LDH induction indicated some possible mechanisms of oxidative stress and deterioration in aerobic respiration processes induced by the tested dyes. Findings of the study suggest that selected biomarker enzymes are useful in understanding the toxic mechanisms of these dyes in X. laevis tadpoles as early warning indicators. Therefore, these selected biomarkers may evaluate the effect of environmental factors, such as textile dye effluents and other industrial pollutants, on amphibians in biomonitoring studies.

Synthetic dye decolorization by three sources of fungal laccase

Decolorization of six synthetic dyes using three sources of fungal laccase with the origin of Aspergillus oryzae, Trametes versicolor, and Paraconiothyrium variabile was investigated. Among them, the enzyme from P. variabile was the most efficient which decolorized bromophenol blue (100%), commassie brilliant blue (91%), panseu-S (56%), Rimazol brilliant blue R (RBBR; 47%), Congo red (18.5%), and methylene blue (21.3%) after 3 h incubation in presence of hydroxybenzotriazole (HBT; 5 mM) as the laccase mediator. It was also observed that decolorization efficiency of all dyes was enhanced by increasing of HBT concentration from 0.1 mM to 5 mM. Laccase from A. oryzae was able to remove 53% of methylene blue and 26% of RBBR after 30 min incubation in absence of HBT, but the enzyme could not efficiently decolorize other dyes even in presence of 5 mM of HBT. In the case of laccase from T. versicolor, only RBBR was decolorized (93%) in absence of HBT after 3 h incubation.