The detection and identification of saliva in forensic samples by RT-LAMP

mRNA for Body Fluid and Individual Identification

Biological stains are one of the most important pieces of evidence, playing a multifaceted role in forensic investigations. An integral facet of forensic practice involves the identification of body fluids, typically achieved through chemical and enzymatic reactions. In recent decades, the introduction of mRNA markers has been posited as a pivotal advancement to augment the capabilities of body fluid identification (BFID). The mRNA coding region single-nucleotide polymorphisms (cSNPs) also present notable advantages, particularly in the task of individual identification. Here, we review the specificity and stability of mRNA markers in the context of BFID and the prowess of mRNA polymorphism in individual identification. Additionally, innovative methods for mRNA detection are discussed.

Rapid detection of blood using a novel application of RT-RPA integrated with CRISPR-Cas: ALAS2 detection as a model

A rapid, sensitive and specific test for blood is reported based on a novel application of recombinase polymerase amplification integrated with CRISPR-Cas and lateral flow assay (LFA). The blood specific marker ALAS2 was used as the target to record the presence of blood. The assay used either RNA extracted from a body fluid as a template, or omitting this extraction step and using a direct approach where the questioned body fluid was added directly to the assay. The assay only detected blood (all peripheral blood and some menstrual blood samples) and no other body fluid (semen, saliva, or vaginal fluid). The limit of detection varied from an initial template of 0.195 ng extracted RNA (27 dilution) or 0.0218 μL (26 dilution) liquid peripheral blood. The assay gave the expected result when peripheral blood was mixed with saliva: ratios of peripheral blood/saliva at 19:1, 3:1, 1:1, 1:3 and 1:19 all gave a positive result using extracted RNA. By contrast, only three ratios of peripheral blood and saliva gave a positive result for blood (19:1, 3:1 and 1:1) when adding these two body fluids directly. When peripheral blood was mixed with semen there was a strong inhibition of the assay and ALAS2 could only be detected at ratio of 19:1 using RNA. Using reconstituted peripheral bloodstains gave comparable results to liquid peripheral blood. This is the first application of RT-RPA integrated CRISPR and combined with a LFA assay to detect body fluid-specific RNA. The proposed method opens up the potential to perform this method remote from laboratories such as at crime scenes.

Female sample screening using colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) targeting non-coding RNA XIST

Forensic sample screening is important for establishing an effective DNA typing workflow. The detection of sex-specific markers in forensic samples highlights the necessity for further analysis. Y-chromosome DNA can confirm male contributions, but female contributions are difficult to confirm using DNA-based methods. To address this, we developed a colorimetric reverse transcription loop-mediated isothermal amplification (RT-LAMP) assay targeting the long non-coding RNA X-inactive specific transcript (XIST) to screen female samples. Operating at 65 °C for 30 min, the assay yielded results discernible from the color change of the pH indicator dye. The assay showed a detection limit of approximately 0.5 µL of blood. The assay also detected XIST RNA in mixed body fluids and mock samples, indicating its potential applicability to casework samples. Taken together, our assay provides a rapid and simple strategy for screening female samples.

Three-Dimensional-Printed Instrument for Isothermal Nucleic Acid Amplification with Real-Time Colorimetric Imaging

Isothermal amplification methods have become popular in research due to the simplicity of the technology needed to run the reactions. Specifically, loop-mediated isothermal amplification (LAMP) has been widely used for various applications since first reported in 2000. LAMP reactions are commonly monitored with the use of colorimetry. Although color changes associated with positive amplification are apparent to the naked eye, this detection method is subjective due to inherent differences in visual perception from person to person. The objectivity of the colorimetric detection method may be improved by programmed image capture over time with simultaneous heating. As such, the development of a novel, one-step, automated, and integrated analysis system capable of performing these tasks in parallel is detailed herein. The device is adaptable to multiple colorimetric dyes, cost-effective, 3D-printed for single-temperature convective heating, and features an easy-to-use LabVIEW software program developed for automated image analysis. The device was optimized and subsequently validated using four messenger-RNA targets and mock forensic samples. The performance of our device was determined to be comparable to that of a conventional thermal cycler and smartphone image analysis, respectively. Moreover, the outlined system is capable of objective colorimetric analysis, with exceptional throughput of up to 96 samples at once.

Versatility of reverse transcriptase loop-mediated isothermal amplification (RT-LAMP) from diagnosis of early pathological infection to mutation detection in organisms

Loop-mediated isothermal amplification (LAMP) is a rapid, state-of-the-art DNA amplification technology, used primarily for the quick diagnosis and early identification of microbial infection, caused by pathogens such as virus, bacteria and malaria. A target DNA can be amplified within 30 min using the LAMP reaction, taking place at a steady temperature. The LAMP method uses four or six primers to bind eight regions of a target DNA and has a very high specificity. The devices used for conducting LAMP are usually simple since the LAMP method is an isothermal process. When LAMP is coupled with Reverse Transcription (RT), it allows direct detection of RNA in a sample. This greatly enhances the efficiency of diagnosis of RNA viruses in a sample. Recently, the rampant spread of COVID-19 demanded such a rapid, simple, and cost-effective Point of Care Test (PoCT) for the accurate diagnosis of this pandemic. Loop-mediated isothermal amplification (LAMP) assays are not only used for the detection of microbial pathogens, but there are various other applications such as detection of genetic mutations in food and various organisms. In this review, various implementations of RT-LAMP techniques would be discussed.

One-tube, two-step isothermal amplification of histatin 3 mRNA for saliva screening

Saliva samples are frequently collected at crime scenes. Salivary mRNA profiling, such as that of histatin 3 (HTN3), is a highly specific approach that overcomes the limitation of traditional amylase tests. However, typical mRNA detection methods based on reverse transcription PCR (RT-PCR) are time-consuming and labor-intensive. Here, we report a one-tube, two-step isothermal amplification assay for HTN3 mRNA, which enables rapid, simple, and sensitive screening of saliva. The first step is an RT-recombinase polymerase amplification (RT-RPA) assay at 42 °C for 20 min; the second step is a loop-mediated isothermal amplification (LAMP) assay at 65 °C for 30 min. The reactions can be performed in a closed tube, and the products are detected using real-time fluorescence analysis. The assay sensitivity was 0.5 µL of saliva samples. It also detected HTN3 mRNA in mixed and mock samples, demonstrating its applicability to actual forensic samples. These findings suggest that our strategy is promising for screening of saliva from forensic samples.

Recent advancements in identification and detection of saliva as forensic evidence: a review

Background

Saliva is the most common biological evidence found at any crime scene next to blood. It is a clear liquid which makes it immune to any possible evidence of alteration by the perpetrator. In forensics, saliva is used as biological evidence and is very helpful in determining various aspects of an individual such as sex, individuality, ABO blood groups, microbial signature, biomarkers, or habits like smoking.

Main body

Saliva shares a great resemblance with plasma as it encompasses similar organic or inorganic compound contents. In forensic casework, identifying any evidence is the primary goal to establish the groundwork for further investigation. Saliva may be found in the form of a pool or stained form, but its identification is challenging because of its transparency. It has been widely used as an informative tool in forensic situations like poisoning, hanging, or cases of drug abuse, etc. for more than two decades now. Over the years, many proposed ways or methods have been identified and described, which helped in the detection and identification of saliva as evidence.

Conclusion

This review article represents the significance of saliva as important forensic evidence, along with the different forms it may be encountered at the crime scene. The use of diverse collection and detection methods, over the past few decades, has been discussed. An attempt has been made to collect the available data, highlighting the merit and demerits of different identification techniques. The relevant data has been collected from all the published and reported literature (1987–2021).

Improved reverse transcription-recombinase polymerase amplification assay for blood mRNA screening: comparison with one-step RT-qPCR assay

mRNA profiling is effective for body fluid identification because of its sensitivity, specificity, and multiplexing capability. Body fluid mRNA markers can typically be detected using RT-qPCR, RT-PCR followed by capillary electrophoresis, or targeted RNA sequencing. However, due to the multiple handling steps involved, the analysis of many forensic samples using these methods requires time and effort. Here, we describe a rapid and simple method for detecting the blood mRNA marker hemoglobin β (HBB), intended for use in screening before definitive blood identification. We employed a reverse transcription-recombinase polymerase amplification (RT-RPA) assay that can detect target mRNA within 20 min in a single tube. For comparison, we used a one-step RT-qPCR assay. We optimized the RT-RPA assay and found that it could detect HBB from 10^-3-10^-4 ng of leukocyte RNA and approximately 10^-3 µL of blood. The sensitivity was 10-fold lower than that of the one-step RT-qPCR assay but higher than that of the comprehensive analysis methods for definitive blood identification. Thus, the rapidity and sensitivity of the RT-RPA assay support its use as a screening tool. We also found that the RT-RPA assay was highly tolerant to common inhibitors such as humic acid, hematin, tannic acid, and melanin. Considering the inhibitor tolerability, we integrated a simple lysis method (addition of TCEP/EDTA and heating at 95 °C for 5 min) without the RNA purification process into the RT-RPA assay. This direct assay successfully detected HBB in crude blood samples. Our findings suggest that the RT-RPA assay for HBB is a promising strategy for mRNA-based blood screening.

A recombinase polymerase amplification (RPA) combined with strip visualization method for RNA-based presumptive tests of saliva and vaginal secretion

Identifying the origin of body fluids is a critical step in a forensic investigation. One widely used method to identify human body fluids is based on the color visualization of immune antigen detection strips for detecting hemoglobin in blood and prostate-specific antigen in semen. It is highly imperative to construct an easy-to-perform, mRNA-based method for the point-of-care identification of other human body fluids, such as saliva and vaginal secretion. Here, we established specific strips with the mRNA markers STATH (for saliva) and SPINK5 (for vaginal secretion) via reverse transcription recombinase polymerase amplification (RT-RPA) and lateral flow dipstick (LFD) assays (RT-RPA-LFD). RT-RPA could be accomplished in a single tube at a wide temperature range of 30-42 ℃ within 10-25 min if we do not count time for RNA extraction. The diluted RPA products were added onto the LFD strip pad to visually observe the color change of the Control/Test line. The tissue specificity and detection limit of the assays were evaluated using the optimized reaction conditions of RPA at 37 ℃ for 15 min. The positive signals of STATH were observed both in saliva and nasal secretions. SPINK5 was positive in a template-dependent manner in 4 out of 30 female urine samples in addition to vaginal secretion and menstrual blood samples. Cross-reactions were not detected in semen, skin swabs, sweat, or male urine. Both assays were capable of detecting aged samples, which were stored for 180 days (saliva) or 300 days (vaginal secretion) at room temperature. Moreover, saliva or vaginal secretion was successfully detected in all kinds of mixtures made from various body fluids. Overall, the rapid strip test method by the RT-RPA-LFD assay is simple, time-saving and highly sensitive for estimating the tissue origin of saliva and vaginal secretion. This method for the rapid RNA-based presumptive tests of the tissue type of body fluids is easy to perform prior to a multiplex mRNA analysis, which can demonstrate more reliable saliva or vaginal secretion identification.

Recent Advances in the Use of Surface-Enhanced Raman Scattering for Illicit Drug Detection

The rapid increase in illicit drug use and its adverse health effects and socio-economic consequences have reached alarming proportions in recent years. Surface-enhanced Raman scattering (SERS) has emerged as a highly sensitive analytical tool for the detection of low dosages of drugs in liquid and solid samples. In the present article, we review the state-of-the-art use of SERS for chemical analysis of illicit drugs in aqueous and complex biological samples, including saliva, urine, and blood. We also include a review of the types of SERS substrates used for this purpose, pointing out recent advancements in substrate fabrication towards quantitative and qualitative detection of illicit drugs. Finally, we conclude by providing our perspective on the field of SERS-based drug detection, including presently faced challenges. Overall, our review provides evidence of the strong potential of SERS to establish itself as both a laboratory and in situ analytical method for fast and sensitive drug detection and identification.

Integrating the salivary microbiome in the forensic toolkit by 16S rRNA gene: potential application in body fluid identification and biogeographic inference

Saliva is a common body fluid with significant forensic value used to investigate criminal cases such as murder and assault. In the past, saliva identification often relied on the α-amylase test; however, this method has low specificity and is prone to false positives. Accordingly, forensic researchers have been working to find new specific molecular markers to refine the current saliva identification approach. At present, research on immunological methods, mRNA, microRNA, circRNA, and DNA methylation is still in the exploratory stage, and the application of these markers still has various limitations. It has been established that salivary microorganisms exhibit good specificity and stability. In this study, 16S rDNA sequencing technology was used to sequence the V3-V4 hypervariable regions in saliva samples from five regions to reveal the role of regional location on the heterogeneity in microbial profile information in saliva. Although the relative abundance of salivary flora was affected to a certain extent by geographical factors, the salivary flora of each sample was still dominated by Streptococcus, Neisseria, and Rothia. In addition, the microbial community in the saliva samples in this study was significantly different from that in the vaginal secretions, semen, and skin samples reported in our previous studies. Accordingly, saliva can be distinguished from the other three body fluids and tissues. Moreover, we established a prediction model based on the random forest algorithm that could distinguish saliva between different regions at the genus level even though the model has a certain probability of misjudgment which needs more in-depth research. Overall, the microbial community information in saliva stains might have prospects for potential application in body fluid identification and biogeographic inference.

Design and optimization of a 16S microbial qPCR multiplex for the presumptive identification of feces, saliva, vaginal and menstrual secretions

Molecular methods for body fluid identification have been extensively researched in the forensic community over the last decade, mostly focusing on RNA‐based methods. Microbial DNA analysis has long been used for forensic applications, such as postmortem interval estimations, but only recently has it been applied to body fluid identification. High‐throughput sequencing of the 16S ribosomal RNA gene by previous research groups revealed that microbial signatures and abundances vary across human body fluids at the genus and/or species taxonomic level. Since quantitative PCR is still the current technique used in forensic DNA analysis, the purpose of this study was to design a qPCR multiplex targeting the 16S gene of Bacteroides uniformis, Streptococcus salivarius, and Lactobacillus crispatus that can distinguish between feces, saliva, and vaginal/menstrual secretions, respectively. Primers and probes were designed at the species level because these bacteria are highly abundant within their respective fluid. The validated 16S triplex was evaluated in DNA extracts from thirty donors of each body fluid. A classification regression tree model resulted in 96.5% classification accuracy of the population data, which demonstrates the ability of this 16S triplex to presumptively identify these fluids with high confidence at the quantification step of the forensic workflow using minimal input volume of DNA extracted from evidentiary samples.

On the Identification of Body Fluids and Tissues: A Crucial Link in the Investigation and Solution of Crime

Body fluid and body tissue identification are important in forensic science as they can provide key evidence in a criminal investigation and may assist the court in reaching conclusions. Establishing a link between identifying the fluid or tissue and the DNA profile adds further weight to this evidence. Many forensic laboratories retain techniques for the identification of biological fluids that have been widely used for some time. More recently, many different biomarkers and technologies have been proposed for identification of body fluids and tissues of forensic relevance some of which are now used in forensic casework. Here, we summarize the role of body fluid/ tissue identification in the evaluation of forensic evidence, describe how such evidence is detected at the crime scene and in the laboratory, elaborate different technologies available to do this, and reflect real life experiences. We explain how, by including this information, crucial links can be made to aid in the investigation and solution of crime.

A novel One-pot rapid diagnostic technology for COVID-19

Novel coronavirus disease (COVID-19) caused by SARS-CoV-2 is an ongoing global pandemic associated with high rates of morbidity and mortality. RT-qPCR has become the diagnostic standard for the testing of SARS-CoV-2 in most countries. COVID-19 diagnosis generally relies upon RT-qPCR-mediated identification of SARS-CoV-2 viral RNA, which is costly, labor-extensive, and requires specialized training and equipment. Herein, we established a novel one-tube rapid diagnostic approach based upon formamide and colorimetric RT-LAMP (One-Pot RT-LAMP) that can be used to diagnose COVID-19 without the extraction of specific viral RNA. The technique could visually detect SARS-CoV-2 within 45 min with a limit of detection of 5 copies per reaction in extracted RNA, and about 7.66 virus copies per μL in viral transport medium. The One-Pot RT-LAMP test showed a high specificity without cross-reactivity with 12 viruses including SARS-CoV, MERS-CoV, and human infectious influenza virus (H1N1/H3N2 of influenza A and B virus, ect. We validated this One-Pot RT-LAMP approach by its successful use for the analysis of 45 clinical nasopharyngeal swab samples, yielding results identical to those of traditional RT-qPCR analyses, while achieving good selectivity and sensitivity relative to a commercial RT-qPCR approach. As such, this One-Pot RT-LAMP technology may be a valid means of conducting high-sensitivity, low-cost and rapid SARS-CoV-2 identification without the extraction of viral RNA.

Identification of Signatures of Selection by Whole-Genome Resequencing of a Chinese Native Pig

Identification of genomic signatures of selection that help reveal genetic mechanisms underlying traits in domesticated pigs is of importance. Anqing six-end-white pig (ASP), a representative of the native breeds in China, has many distinguishing phenotypic characteristics. To identify the genomic signatures of selection of the ASP, whole-genome sequencing of 20 ASPs produced 469.01 Gb of sequence data and more than 26 million single-nucleotide polymorphisms. Combining these data with the available whole genomes of 13 Chinese wild boars, 157 selected regions harboring 48 protein-coding genes were identified by applying the polymorphism levels (θπ) and genetic differentiation (F_ST) based cross approaches. The genes found to be positively selected in ASP are involved in crucial biological processes such as coat color (MC1R), salivary secretion (STATH), reproduction (SPIRE2, OSBP2, LIMK2, FANCA, and CABS1), olfactory transduction (OR5K4), and growth (NPY1R, NPY5R, and SELENOM). Our research increased the knowledge of ASP phenotype-related genes and help to improve our understanding of the underlying biological mechanisms and provide valuable genetic resources that enable effective use of pigs in agricultural production.

Detection of melon necrotic spot virus by one-step reverse transcription loop-mediated isothermal amplification assay

Melon necrotic spot virus (MNSV) can cause significant economic losses due to decreased quality in cucurbit crops. The current study is the first to use reverse transcription loop-mediated isothermal amplification (RT-LAMP) for detection of MNSV. A set of four LAMP primers was designed based on the coat protein gene sequence of MNSV, and a RT-LAMP reaction was successfully performed for 1 h at 62°C. The results of RT-LAMP showed high specificity for MNSV and no cross-reaction with other viruses. Compared to traditional reverse transcription-PCR (RT-PCR), the RT-LAMP assay was 10³-fold more sensitive in detecting MNSV. Due to its sensitivity, speed and visual assessment, RT-LAMP is appropriate for detecting MNSV in the laboratory.