Application of Response Surface Methodology and Dispersive Liquid–Liquid Microextraction by Microvolume Spectrophotometry Method for Rapid Determination of Curcumin in Water, Wastewater, and Food Samples

Novel reusable and switchable deep eutectic solvent for extraction and determination of curcumin in water and food samples

For the first time, a fast and easy extraction method based on a unique reusable and switchable deep eutectic solvent (made of octylamine, succinic acid, and water as precursors) was presented and utilized for the microextraction and determination of curcumin as a model analyte. The main factors used to induce a phase transition in the as-prepared deep eutectic solvent were solutions of NaOH and HCl. Among the standout characteristics of the suggested deep eutectic solvent are the removal of toxic organic solvents like THF, the lack of a need for centrifugation, and the ability to be reused in subsequent extractions. The influence of effective parameters (i.e., proportions of deep eutectic solvent structure components, volume of prepared deep eutectic solvent, volume and concertation of NaOH, volume of HCl, and salt effect) on the extraction procedure were investigated. The calibration curve also was linear in the range of 35-500 μg L-1 with coefficients of determination (R2) of 0.9976. Limit of detection (S/N = 3) 10.0 μg L-1, the limit of quantification (LOQ) of 35.0 μg L-1, the relative standard deviations (RSDs %) composed of intra-day RSD (4.7) and inter-day RSD (6.4), preconcentration factor of 40.0, enrichment factor of 38.68, and relative recovery of 92.6%-100.3 % were achieved. The reusable and switchable deep eutectic solvent based-dispersive liquid-liquid microextraction technique was proficiently employed to expedite easy and fast extraction of curcumin from water and food samples.

Synthesis and Characteristics of Polymer-Mediated Curcumin Molecular Imprinting for Quantitative Determination of Curcumin in Food Samples

In this study, a molecularly imprinted polymer (MIP)-based extraction process for determining curcumin in food samples was carried out. MIP and NIP were thermally synthesized in acetonitrile solvent (porogen) using methacrylic acid as a functional monomer, ethylene glycol dimethacrylate as a cross-linking agent, azobisisobutyronitrile as an initiator, and curcumin as a template molecule. Parameters affecting the synthesis process, such as temperature, the ratio of the components in the reaction, and the extraction solvent, were investigated. The characteristics of the synthesized material were examined using infrared spectroscopy and scanning electron microscopy. The maximum adsorption capacity of the material was found to be 1.34 mg/g MIP with an adsorption efficiency of 89.96% for MIP and 12.35% for NIP. The MIP material exhibited high selectivity for curcumin compared to other compounds such as quercetin (18.00%), rutin (14.74%), and ketoconazole (0.00%). The analysis method for curcumin using the MIP material was performed with validated parameters including linear range (1 - 25 mg/L, r2 = 0.9997), accuracy (recovery rate of 90.90 %), precision (RSDR = 0.338 %, RSDr = 1.591 %), detection limit (0.051 mg/L), and quantification limit (0.156 mg/L). The validation results indicated that the HPLC-DAD method was entirely suitable for analyzing the curcumin content in food samples.

Solvent terminated natural deep eutectic solvent microextraction for concentration of curcuminoids in Curcumae Longae Rhizoma and turmeric tea

A novel solvent terminated microextraction method based on a natural deep eutectic solvent (L-menthol and lactic acid at a molar ratio of 1:2) coupled with HPLC was proposed, which was utilized for the separation and enrichment of bisdemethoxycurcumin, demethoxycurcumin and curcumin in Curcumae Longae Rhizoma and turmeric tea. The effects of independent parameters on extraction efficiency were optimized by single-factor analysis. Subsequently, four predominated parameters affecting extraction procedure, including extractant volume, salt concentration, demulsifier consumption and demulsification time, were further evaluated by central composite design. Under the optimized conditions, the linear ranges of calibration curves were 0.005-0.5 μg/mL for bisdemethoxycurcumin, 0.004-0.4 μg/mL for demethoxycurcumin and 0.0045-0.45 μg/mL for curcumin, respectively. In addition, the developed method provided low detection limits (0.1-0.4 ng/mL) and high enrichment factors (279-350). Its intra-day and inter-day precision were carried out by relative standard deviation ranged from 2.2% to 9.2%. Finally, the applicability of this method was assessed by the analysis of Curcumae Longae Rhizoma and turmeric tea samples. The results showed that these samples were detected successfully and the spiked recoveries over the range of 85.3%-108.9% with relative standard deviations 1.6%-8.9% were attained, indicating its high relative recoveries with good precision in real sample analysis. This article is protected by copyright. All rights reserved.

Synchronized spectrofluorimetric determination of ponatinib and curcumin as an effective therapeutic combination in laboratory prepared mixtures and human plasma samples

Curcumin is a natural product that is frequently utilized in cancer prevention and treatment. The significant benefit of vegetable-derived nutraceuticals in combination with widespread cytostatic medication such as ponatinib is to reduce toxicity and side effects. In this paper, we focus the study on analytical quantification of ponatinib and curcumin through highly sensitive synchronous spectrofluorometric method. Applying this method at Δλ = 160 nm, each of ponatinib and curcumin could be measured at 303 and 412 nm without interference from each others. The diverse experimental factors impacting the performance of the method were studied and optimized. The method exhibited a reasonable linearity in the ranges of 5.0-60.0 and 10.0-200.0 ng/mL for ponatinib and curcumin, respectively with detection limits of 1.48 and 1.22 ng/mL and quantitation limits of 4.49 and 3.68 ng/mL, respectively. The anticipated method was employed for the assessment and evaluation of the studied drugs in the spiked human plasma samples. The mean % recoveries in plasma samples (n = 6) for each of ponatinib and curcumin were 99.84 ± 1.86 and 100.06 ± 2.72, accordingly. The developed method was validated in conformity with the requirements of International Council of Harmonization (ICH).

Ultrasound-assisted hydrophobic deep eutectic solvent based solid-liquid microextraction of Sudan dyes in spice samples

An environmentally friendly, simple method was carried out with the help of an ultrasonic assisted solid-liquid microextraction technique using a new deep eutectic solvent (DES) for the extraction and determination of Sudan dyes (I-IV) in spice samples. In this method, parameters affecting the optimization were researched and optimized such as DES composition, DES volume, ultrasonic time, temperature and, centrifuge time. The analytical performance of the developed method was quite satisfactory, the R² values were higher than 0.9989, and the limits of quantification were <1.17 μg g^-1. Two different concentrations (10-50 μg g^-1) were spiked to Chili peppers, paprika, cumin and sumac spices for the applicability and accuracy of the developed microextraction method. Some of these spices were found to contain Sudan I and IV dyes. The recovery values for spiked samples were found to be between 85.55% and 99.29% and relative standard deviations were found to be <3.17% when using a 10 μg g^-1 Sudan dyes concentration. The results showed that the developed method can be successfully applied for extraction and determination of Sudan dyes in spice samples.

Application of aeration-assisted homogeneous liquid-liquid microextraction procedure using Box-Behnken design for determination of curcumin by HPLC

A simple, efficient, and rapid sample preparation method based on aeration-assisted homogeneous liquid-liquid microextraction was developed for determination of curcumin in food samples by high-performance liquid chromatography. The centrifuge step has been eliminated in this procedure. The effects of some variables, such as pH, volume of extraction solvent, extraction time, and salt effect, were studied through a Box-Behnken design method. Under the optimum conditions, calibration curves of curcumin were linear in the range of 0.08-4000 μg/mL with R2  = 0.997. Limit of detection and relative standard deviation were 0.019 μg/mL and 3.01%, respectively. The preconcentration factor achieved was 166. The proposed method was successfully applied to determination of curcumin in various food samples.

Optimized Vortex-Assisted Dispersive Liquid–Liquid Microextraction Coupled with Spectrofluorimetry for Determination of Aspirin in Human Urine: Response Surface Methodology

Background:

A Vortex-assisted dispersive liquid-liquid microextraction (VA-DLLME) method is presented for the determination of aspirin (acetylsalicylic acid) in human urine by spectrofluorimetry.

Objective:

To determine trace levels of aspirin in biologic samples by using green and low-cost method development.

Methods:

For the microextraction procedure, chloroform and acetonitrile were used as extraction and disperser solvent, respectively. The factors affecting the efficiency of extraction such as volume of chloroform, volumes of acetonitrile, ionic strength, sample pH, centrifuging time, and extraction time were investigated. Then significant variables were optimized by the response surface method using the Box- Behnken design.

Results:

Under the optimum extraction conditions, a linear calibration curve in the range of 0.1 to 130 ng mL-1 with a correlation coefficient of R2 = 0.998 was obtained. The limits of detection (LOD) and limits of quantification (LOQ) were 0.031 and 0.103 ng mL-1, respectively. The relative standard deviations (RSD) were less than 4%.

Conclusion:

Enrichment factor and recoveries were achieved for the extraction of aspirin in human urine. This method gives a rapid, simple, sensitive and environmentally friendly for the measurement of trace amount aspirin.

Chitosan/polyvinyl alcohol nanofibrous membranes: towards green super-adsorbents for toxic gases

Removal of hazardous gases from the atmosphere has become a big challenge for scientists and engineers alike. Eco-friendly nature of biopolymers has given a new dimension to the debate within the environmental science area but attempts mainly failed to cleanse the air stream of toxic gases as a consequence of design imperfections. In this work, green electrospun nanofibrous membranes based on chitosan (Cs)/polyvinyl alcohol (PVA) composite with a very high carbon monoxide adsorption capacity (much higher than the values one may expect from activated carbon and zeolite adsorbents, and also higher than that of the metal-organic framework) are developed. 2^k−1 factorial design, response surface and desirability function analyses are merged to optimize the electrospinning parameters for functional-based carbon monoxide elimination. The best Cs/PVA adsorbent obtained through multi-objective optimization has a very high desirability value level of 0.953. Optimized electrospinning parameters are: Voltage = 17 kV, spinning distance = 13 cm, flow rate = 0.2 mL/h, and PVA concentration = 6 wt.%; and optimized properties are: maximum thermal stability = 329 °C, minimum fiber diameter = 9.8 nm, and maximum surface area = 2204 m²/g. This work opens a new era for taking the next steps towards the design and optimization of green super-adsorbents for gaseous contaminations.

Dispersive micro-solid phase extraction based on Fe3O4@SiO2@Ti-MOF as a magnetic nanocomposite sorbent for the trace analysis of caffeic acid in the medical extracts of plants and water samples prior to HPLC-UV analysis

In this work, Fe₃O₄@SiO₂@Ti-MOF-NCs, as an efficient sorbent, have been synthesized in a laboratory and utilized for extracting CA in the medical extracts of plants and water samples before their analysis by HPLC.

Cu- and S- @SnO2 nanoparticles loaded on activated carbon for efficient ultrasound assisted dispersive µSPE-spectrophotometric detection of quercetin in Nasturtium officinale extract and fruit juice samples: CCD-RSM design

A simple, rapid, and efficient method of dispersive micro solid phase extraction (D-μ-SPE) combined with UV-Vis spectrophotometry via ultrasound-assisted (UA) was applied for the determination and preconcentration of quercetin in extract of watercress (Nasturtium officinale), fruit juice and water samples. The sorbent in this method was synthesized by doping copper and sulfide into the tetragonal structure of SnO₂-nanoparticles (Cu- and S- @SnO₂-NPs) and subsequently loading it on activated carbon (AC). The D-μ-SPE parameters with direct effect on the extraction efficiency of the targeted analyte, such as sample pH, volume of eluent, sorbent mass and ultrasound time were optimized using central composite design method. Under optimized conditions, the calibration graph for quercetin was linear in the range of 20-4000 ng mL^-1; the limit of detection and quantitation were 4.35 and 14.97 ng mL^-1, respectively and the enrichment factor was 95.24. Application of this method to analyze spiked extract, fruit juice and water samples resulted in acceptable recovery values ranging from 90.3% to 97.28% with intra-day and inter-day relative standard deviation values lower than 6.0% in all cases. Among the equilibrium isotherms tested, Langmuir was found to be the best fitted model with maximum sorption capacity of 39.37 mg g^-1, suggesting a homogeneous mode of sorption for quercetin.

Comparison between dispersive solid-phase and dispersive liquid-liquid microextraction combined with spectrophotometric determination of malachite green in water samples based on ultrasound-assisted and preconcentration under multi-variable experimental design optimization

The ultrasound-assisted dispersive solid-phase microextraction (USA-DSPME) and the ultrasound-assisted dispersive liquid-liquid microextraction (USA-DLLME) developed for as an ultra preconcentration and/or technique for the determination of malachite green (MG) in water samples. Central composite design based on analysis of variance and desirability function guide finding best operational conditions and represent dependency of response to variables viz. volume of extraction, eluent and disperser solvent, pH, adsorbent mass and ultrasonication time has significant influence on methods efficiency. Optimum conditions was set for USA-DSPME as: 1mg CNTs/Zn:ZnO@Ni₂P-NCs; 4min sonication time and 130μL eluent at pH 6.0. Meanwhile optimum point for USA-DLLME conditions were fixed at pH 6.0; 4min sonication time and 130, 650μL and 10mL of extraction solvent (CHCl₃), disperser solvent (ethanol) and sample volume, respectively. Under the above specified best operational conditions, the enrichment factors for the USA-DSPME and USA-DLLME were 88.89 and 147.30, respectively. The methods has linear response in the range of 20.0 to 4000.0ngmL^-1 with the correlation coefficients (r) between 0.9980 to 0.9995, while its reasonable detection limits viz. 1.386 to 2.348ngmL^-1 and good relative standard deviations varied from 1.1% to 2.8% (n=10) candidate this method for successful monitoring of analyte from various media. The relative recoveries of the MG dye from water samples at spiking level of 500ngmL^-1 were in the range between 94.50% and 98.86%. The proposed methods has been successfully applied to the analysis of the MG dye in water samples, and a satisfactory result was obtained.

Ultrasound assisted extraction of Maxilon Red GRL dye from water samples using cobalt ferrite nanoparticles loaded on activated carbon as sorbent: Optimization and modeling

In this research, a selective, simple and rapid ultrasound assisted dispersive solid-phase micro-microextraction (UA-DSPME) was developed using cobalt ferrite nanoparticles loaded on activated carbon (CoFe₂O₄-NPs-AC) as an efficient sorbent for the preconcentration and determination of Maxilon Red GRL (MR-GRL) dye. The properties of sorbent are characterized by X-ray diffraction (XRD), Transmission Electron Microscopy (TEM), Vibrating sample magnetometers (VSM), Fourier transform infrared spectroscopy (FTIR), Particle size distribution (PSD) and Scanning Electron Microscope (SEM) techniques. The factors affecting on the determination of MR-GRL dye were investigated and optimized by central composite design (CCD) and artificial neural networks based on genetic algorithm (ANN-GA). CCD and ANN-GA were used for optimization. Using ANN-GA, optimum conditions were set at 6.70, 1.2mg, 5.5min and 174μL for pH, sorbent amount, sonication time and volume of eluent, respectively. Under the optimized conditions obtained from ANN-GA, the method exhibited a linear dynamic range of 30-3000ngmL^-1 with a detection limit of 5.70ngmL^-1. The preconcentration factor and enrichment factor were 57.47 and 93.54, respectively with relative standard deviations (RSDs) less than 4.0% (N=6). The interference effect of some ions and dyes was also investigated and the results show a good selectivity for this method. Finally, the method was successfully applied to the preconcentration and determination of Maxilon Red GRL in water and wastewater samples.

Recent configurations and progressive uses of magnetic molecularly imprinted polymers for drug analysis

Since the introduction of the molecularly imprinting technology (MIT) in the 1970s, it becomes an emerging technology with the potential for wide-ranging applications in drug determination. With the rise of green chemistry, many researchers began to focus on the application and development of green materials which led to the breakthrough of molecularly imprinted polymers (MIPs) in the green chemistry. Because of the low concentration levels in the human matrices, almost adequate analytical methods should be used for quantification of drugs at the trace levels. In recent years there have been reported benefits of combining MIPs with additional features, e.g. magnetic properties, through the build-up of this type of material on magnetite particles. Magnetic molecularly imprinted polymer (MMIP) is a new material which is composed of magnetic material and non-magnetic polymer material and shares the characteristics of high adsorption capacity to template molecule, special selective recognition ability, and the magnetic adsorption property. These materials have been widely used in the different fields such as chemical, biological and medical science. This review describes the novel configurations and progressive applications of magnetic molecularly imprinted polymers to the drug analysis. Also, the advantages and drawbacks of each methodology, as well as the future expected trends, are evaluated.

Ultrasonic assisted dispersive solid-phase microextraction of Eriochrome Cyanine R from water sample on ultrasonically synthesized lead (II) dioxide nanoparticles loaded on activated carbon: Experimental design methodology

The present research focus on designing an appropriate dispersive solid-phase microextraction (UA-DSPME) for preconcentration and determination of Eriochrome Cyanine R (ECR) in aqueous solutions with aid of sonication using lead (II) dioxide nanoparticles loaded on activated carbon (PbO-NPs-AC). This material was fully identified with XRD and SEM. Influence of pH, amounts of sorbent, type and volume of eluent, and sonication time on response properties were investigated and optimized by central composite design (CCD) combined with surface response methodology using STATISTICA. Among different solvents, dimethyl sulfoxide (DMSO) was selected as an efficient eluent, which its combination by present nanoparticles and application of ultrasound waves led to enhancement in mass transfer. The predicted maximum extraction (100%) under the optimum conditions of the process variables viz. pH 4.5, eluent 200μL, adsorbent dosage 2.5mg and 5min sonication was close to the experimental value (99.50%). at optimum conditions some experimental features like wide 5-2000ngmL^-1 ECR, low detection limit (0.43ngmL^-1, S/N=3:1) and good repeatability and reproducibility (relative standard deviation, <5.5%, n=12) indicate versatility in successful applicability of present method for real sample analysis. Investigation of accuracy by spiking known concentration of ECR over 200-600ngmL^-1 gave mean recoveries from 94.850% to 101.42% under optimal conditions. The procedure was also applied for the pre-concentration and subsequent determination of ECR in tap and waste waters.

Optimization and modeling of preconcentration and determination of dyes based on ultrasound assisted-dispersive liquid-liquid microextraction coupled with derivative spectrophotometry

Present study is based on describing an ultrasound-assisted dispersive liquid-liquid microextraction coupled with derivative spectrophotometry (UAS-DLLME-UV-vis) as useful technique for selective determination of crystal violet (CV) and azure b (Az-B). The significant factors like pH, extractor volume, disperser value and extraction time contribution and their numerical coefficient in quadratic model were calculated according to central composite design (CCD). According to desirability function (DF) as good criterion the best experimental conditions was adjusted and selected at pH of 7.0, 170μL of chloroform, 800μL of ethanol that strongly mixed with the aqueous phase via 4min sonication. Additionally, under study system was modeled by trained artificial neural networks (ANNs) as fitness function with acceptable error of MSE 2.97×10^-06 and 1.15×10^-05 with R²: 0.9999 and 0.9997 for CV and Az-B, respectively. The optimum conditions by using genetic algorithm (GA) method was pH of 6.3, 160μL of chloroform, 740μL of ethanol and 4.5min sonication. Under above specified and optimize conditions, the predicted extraction percentage were 99.80 and 102.20% for CV and Az-B, respectively. The present UAS-DLLME-UV-vis procedure has minimum interference from other substances assign to the matrix, which candidate this method as good alternative to quantify under study dyes content with recoveries in the range of 86-100% for dyes. The detection limits were 2.043ngmL^-1 and 1.72ngmL^-1, and limits of quantitation were 6.81ngmL^-1 and 5.727ngmL^-1 for CV and Az-B, respectively. The proposed methodology was successfully applied for quantification of under study analytes at different media.

Ultrasound assisted combined molecularly imprinted polymer for selective extraction of nicotinamide in human urine and milk samples: Spectrophotometric determination and optimization study

Ultrasound-assisted dispersive solid phase microextraction followed by UV-vis spectrophotometer (UA-DSPME-UV-vis) was designed for extraction and preconcentration of nicotinamide (vitamin B₃) by HKUST-1 metal organic framework (MOF) based molecularly imprinted polymer (MIP). This new material was characterized by FTIR and FE-SEM techniques. The preliminary Plackett-Burman design was used for screening and subsequently the central composite design justifies significant terms and possible construction of mathematical equation which give the individual and cooperative contribution of variables like HKUST-1-MOF-NA-MIP mass, sonication time, temperature, eluent volume, pH and vortex time. Accordingly the optimum condition was set as: 2.0mg HKUST-1-MOF-NA-MIP, 200μL eluent and 5.0min sonication time in center points other variables were determined as the best conditions to reach the maximum recovery of the analyte. The UA-DSPME-UV-vis method performances like excellent linearity (LR), limits of detection (LOD), limits of quantification of 10-5000μgL^-1 with R² of 0.99, LOD (1.96ngmL^-1), LOQ (6.53μgL^-1), respectively show successful and accurate applicability of the present method for monitoring analytes with within- and between-day precision of 0.96-3.38%. The average absolute recoveries of the nicotinamide extracted from the urine, milk and water samples were 95.85-101.27%.