Ultrasound-Assisted Enzymatic Extraction of Anthocyanins from Raspberry Wine Residues: Process Optimization, Isolation, Purification, and Bioactivity Determination

Recovery of carotenoids as bioactive compounds from peach pomace by an eco-friendly ultrasound-assisted enzymatic extraction

The industrial processing of fruits generates by-products. These by-products serve as a source of valuable bioactive compounds. In this study, carotenoid was extracted from peach pomace (PP) by using the ultrasound-assisted enzymatic extraction (UAEE), an eco-friendly method. The process conditions ensuring the highest carotenoid content and b* color value for UAEE were detected by response surface methodology (RSM). To demonstrate the effectiveness of the ultrasonic process, enzymatic extraction was carried out at the optimum point. Physicochemical (pH, titratable acidity, total soluble solids), color (L*, a*, b*, chroma value (ΔC) and color difference (ΔE), total phenolic compound (TPC) and antioxidant activity analyses (ABTS and FRAP) were carried. When the analysis results evaluated, the highest b* color parameter, TPC (761.10 mg gallic acid/L), ABTS (1933.33 mg Trolox/L) and FRAP (52.66 µmol Trolox/L) results of the extracts was observed with UAEE method. The study shows that ultrasound based upon the cavitation event was increased efficiency of enzymatic reaction with higher extraction yield and this provided in higher amounts of carotenoid and bioactive compounds. In other respects, when obtained carotenoid extracts are used in food formulations compatible with their acidic structure, they will contribute to protection of the product and minimizing color losses.

Response Surface Methodology for Optimization of Ultrasound-Assisted Antioxidants Extraction from Blackberry, Chokeberry and Raspberry Pomaces

An investigation of the ultrasound-assisted extraction (UAE) of polyphenol-rich aqueous extracts from blackberry, chokeberry and raspberry pomaces was carried out. The aim of the study was to choose optimal conditions for UAE in order to obtain extracts rich in phenolic compounds. The optimization was carried out based on response surface methodology. The variable conditions were amplitude of ultrasound wave and extraction time, whereas responses were total polyphenol content and antioxidant capacity. Based on the ANOVA analysis, mathematical models were fitted and verified. The most effective conditions of amplitude and time were 98% and 5.00 min, 78% and 10.32 min and 90% and 11.56 min for blackberry pomace, chokeberry pomace and raspberry pomace, respectively. The actual results obtained in optimized conditions were comparable to the results predicted by the models. Additionally, the anthocyanin content in extracts was determined in the high-performance liquid chromatography assay. It was proven that response surface methodology could be a useful tool in the optimization of UAE processes for obtaining polyphenol-rich extracts from berry fruit pomaces.

A Review of Quantitative and Topical Analysis of Anthocyanins in Food

Anthocyanins, a subclass of flavonoids known for their vibrant colors and health-promoting properties, are pivotal in the nutritional science and food industry. This review article delves into the analytical methodologies for anthocyanin detection and quantification in food matrices, comparing quantitative and topical techniques. Quantitative methods, including High-performance Liquid Chromatography (HPLC) and Mass Spectrometry (MS), offer precise quantification and profiling of individual anthocyanins but require sample destruction, limiting their use in continuous quality control. Topical approaches, such as Near-infrared Spectroscopy (NIR) and hyperspectral imaging, provide rapid, in situ analysis without compromising sample integrity, ideal for on-site food quality assessment. The review highlights the advancements in chromatographic techniques, particularly Ultra-high-performance Liquid Chromatography (UHPLC) coupled with modern detectors, enhancing resolution and speed in anthocyanin analysis. It also emphasizes the growing importance of topical techniques in the food industry for their efficiency and minimal sample preparation. By examining the strengths and limitations of both analytical realms, this article aims to shed light on current challenges and prospective advancements, providing insights into future research directions for improving anthocyanin analysis in foods.

The way forward to produce nutraceuticals from agri-food processing residues: obstacle, solution, and possibility

Food matrices contain bioactive compounds that have health benefits beyond nutritional value. The bulk of bioactive chemicals are still present in agro-industrial by-products as food matrices. Throughout the food production chain, there is a lot of agro-industrial waste that, if not managed effectively, could harm the environment, company, and how nutritiously and adequately people eat. It's important to establish processes that maximise the use of agro-industrial by-products, such as biological technologies that improve the extraction and acquisition of bioactive compounds for the food and pharmaceutical industries. As opposed to nonbiological processes, biological procedures provide high-quality, bioactive extracts with minimum toxicity and environmental impact. Fermentation and enzymatic treatment are biological processes for obtaining bioactive compounds from agro-industrial waste. In this context, this article summarises the principal bioactive components in agro-industrial byproducts and the biological methods employed to extract them. In this review efficient utilization of bioactive compounds from agro-industrial waste more effectively in food and pharmaceutical industries has been described.

The Potential of Crude and Partially Purified Black Rice Bran Extracts Obtained by Ultrasound-Assisted Extraction: Anti-Glycemic, Cytotoxicity, Cytoprotective, and Antitumoral Effects

Recovering anthocyanins from black rice bran is a way of valuing this byproduct, by obtaining an extract with biological potential. The objective of this study was to recover anthocyanins using ultrasound-assisted extraction. Some of the extract was partially purified, and both (crude and partially purified) extracts were evaluated for their anthocyanin content, antioxidant activity, antidiabetic and antitumoral activities, cytotoxicity, and oxidative stress. An increase in the laboratory scale was also achieved, making possible to increase the extraction volume up to 20 times without significantly changing the content of anthocyanins (1.85 mg C3G/g DW). It was found that the purified sample presented a 4.2 times higher value of total anthocyanins compared to the crude sample. The best IC50 values for the purified sample were verified by DPPH and ABTS (0.76 and 0.33 mg/mL). The best results for antidiabetic activity were obtained for the partially purified sample: 0.82 µM C3G for α-glucosidase and 12.5 µM C3G for α-amylase. The extracts demonstrated protection (~70%) when subjected to the oxidative stress of L929 cells. An antitumoral effect of 25-30% for both extracts was found in A459 cells. The crude and partially purified extracts of black rice have antidiabetic and anticancer effects and more studies are needed to explore their potential.

Ultrasound assisted phytochemical extraction of red cabbage by using deep eutectic solvent: Modelling using ANFIS and optimization by genetic algorithms

The present investigation studied the effect of process parameters on the extraction of phytochemicals from red cabbage by the application of ultrasonication and temperature. The solvent selected for the study was deep eutectic solvent (DES) prepared by choline chloride and citric acid. The ultrasound assisted extraction process was modeled using adaptive neuro-fuzzy inference system (ANFIS) algorithm and integrated with the genetic algorithm for optimization purposes. The independent variables that influenced the responses (total phenolic content, antioxidant activity, total anthocyanin activity, and total flavonoid content) were ultrasonication power, temperature, molar ratio of DES, and water content of DES. Each ANFIS model was formed by the training of three Gaussian-type membership functions (MF) for each input, trained by a hybrid algorithm with 500 epochs and linear type MF for output MF. The ANFIS model predicted each response close to the experimental data which is evident by the statistical parameters (R2>0.953 and RMSE <1.165). The integrated hybrid ANFIS-GA algorithm predicted the optimized condition for the process parameters of ultrasound assisted extraction of phytochemicals from red cabbage was found to be 252.114 W for ultrasonication power, 52.715 °C of temperature, 2.0677:1 of molar ratio of DES and 25.947 % of water content in DES solvent with maximum extraction content of responses, with fitness value 3.352. The relative deviation between the experimental and ANFIS predicted values for total phenolic content, antioxidant activity, total anthocyanin activity, and total flavonoid content was found to be 1.849 %, 3.495 %, 2.801 %, and 4.661 % respectively.

A comprehensive review of ultrasonic assisted extraction (UAE) for bioactive components: Principles, advantages, equipment, and combined technologies

The increasing focus on health and well-being has sparked a rising interest in bioactive components in the food, pharmaceutical, and nutraceutical industries. These components are gaining popularity due to their potential benefits for overall health. The growing interest has resulted in a continuous rise in demand for bioactive components, leading to the exploration of both edible and non-edible sources to obtain these valuable substances. Traditional extraction methods like solvent extraction, distillation, and pressing have certain drawbacks, including lower extraction efficiency, reduced yield, and the use of significant amounts of solvents or resources. Furthermore, certain extraction methods necessitate high temperatures, which can adversely affect certain bioactive components. Consequently, researchers are exploring non-thermal technologies to develop environmentally friendly and efficient extraction methods. Ultrasonic-assisted extraction (UAE) is recognized as an environmentally friendly and highly efficient extraction technology. The UAE has the potential to minimize or eliminate the need for organic solvents, thereby reducing its impact on the environment. Additionally, UAE has been found to significantly enhance the production of target bioactive components, making it an attractive method in the industry. The emergence of ultrasonic assisted extraction equipment (UAEE) has presented novel opportunities for research in chemistry, biology, pharmaceuticals, food, and other related fields. However, there is still a need for further investigation into the main components and working modes of UAEE, as current understanding in this area remains limited. Therefore, additional research and exploration are necessary to enhance our knowledge and optimize the application of UAEE. The core aim of this review is to gain a comprehensive understanding of the principles, benefits and impact on bioactive components of UAE, explore the different types of equipment used in this technique, examine the various working modes and control parameters employed in UAE, and provide a detailed overview of the blending of UAE with other emerging extraction technologies. In conclusion, the future development of UAEE is envisioned to focus on achieving increased efficiency, reduced costs, enhanced safety, and improved reliability. These key areas of advancement aim to optimize the performance and practicality of UAEE, making it a more efficient, cost-effective, and reliable extraction technology.

Green Processing of Black Raspberry Pomace: Application of Sonotrode-Based Extraction Technique and Particles from Gas-Saturated Solutions (PGSS) Technology

The aim of this study was to develop, for the first time, anthocyanin-enriched fractions from black raspberry pomace (BRP) using ultrasound-assisted extraction (UAE) via sonotrode and the Particles from Gas-Saturated Solutions (PGSS) process. UAEs with different amplitudes and sonication times were evaluated and showed relevant effects on the yields of target analytes. The raspberry pomace extracts were formulated in a powder form by PGSS using glyceryl monostearate as a carrier at different extract-to-carrier ratios of 1:11, 1:5, and 1:3. The effects of all variables were evaluated in terms of extraction yield, total phenolic content, and encapsulation yield. UAE was strongly affected by amplitude, and the highest amplitude (100%) provided the best results for extraction yield and total phenolics. HPLC of UAE extracts and powders was utilized for quantification of polyphenol compounds, showing cyanidin-3-rutinoside as a main compound, followed by cyanidin-3-glucoside, rutin, ellagic acid, and gallic acid. These results show that these time-efficient and high-performance techniques enable the production of natural fractions from industrial BRP with acceptable characteristics to be used for the development of nutraceuticals and different food formulations.

Optimized Single-Step Recovery of Lipophilic and Hydrophilic Compounds from Raspberry, Strawberry and Blackberry Pomaces Using a Simultaneous Ultrasound-Enzyme-Assisted Extraction (UEAE)

An ultrasound-enzyme-assisted extraction (UEAE) was optimized to extract, simultaneously, the hydrophilic and lipophilic compounds from three berry pomaces (raspberry, strawberry and blackberry). First, an enzyme screening designated a thermostable alkaline protease as the most suitable enzyme to recover, in an aqueous medium, the highest yields of polyphenols and oil in the most efficient way. Secondly, the selected enzyme was coupled to ultrasounds (US) in sequential and simultaneous combinations. The simultaneous US-alkaline enzyme combination was selected as a one-single-step process and was then optimized by definitive screening design (DSD). The optimized parameters were: US amplitude, 20% (raspberry pomace) or 70% (strawberry and blackberry pomaces); pH, 8; E/S ratio, 1% (w/w); S/L ratio, 6% (w/v); extraction time, 30 min; temperature, 60 °C. Compared to conventional extractions using organic solvents, the UEAE extracted all the polyphenols, with around 75% of the active polyphenols (measured by the DPPH● method) and up to 75% of the initial oil from the berry pomaces. Characterized lipophilic compounds were rich in polyunsaturated fatty acids (PUFAs), tocols and phytosterols. The polyphenolics were analyzed by UPLC-MS/MS; characteristic ellagitannins of the Rosaceae family (sanguiin H-6 or agrimoniin, sanguiin H-10, …) and ellagic acid conjugates were found as the major components.

Extraction of anthocyanins from haskap using cold plasma-assisted enzyme

BACKGROUND

Haskap berries (Lonicera caerulea L.) are rich in anthocyanins. Cold plasma-assisted enzyme method (CPEM) is an innovative method for green extraction of anthocyanins, which was optimized by an artificial neural network-genetic algorithm (ANN-GA) to maximize the yield. In this study, seven factors were screened using by Plackett-Burman design based on single-factor experiments and optimized by ANN-GA.

RESULTS

The results showed that the maximum total anthocyanin content (TAC, 42.45 ± 0.25 g cyanidin-3-glucoside equivalent (C3G) kg^-1 dry weight, DW) was obtained under optimal pretreatment power of 192 W, pretreatment time of 29 s and liquid-to-solid ratio of 39 mL g^-1 . Cleavage and porosity appeared on the surface of the treated sample. The active ingredients and antioxidant capacity of the CPEM extracts were identified by ultra-performance liquid chromatography with quadrupole time-of-flight mass spectrometry (UPLC-Q-TOF-MS). Compared with other extraction technologies, CPEM presents the advantages of shortening the extraction time, reducing the solvent volume, and significantly increasing active ingredients and antioxidant activity.

CONCLUSION

The ANN-GA has better predictive and higher accuracy than the response surface methodology (RSM) model and is more suitable for optimizing the CPEM by greatly improving the process yield and the utilization of biomass, thus contributing to the sustainability of the agri-food chain. © 2022 Society of Chemical Industry.

Prospects of ultrasonically extracted food bioactives in the field of non-invasive biomedical applications - A review

Foods incorporated with bioactive compounds, called nutraceuticals, can fight or prevent or alleviate diseases. The contribution of nutraceuticals or phytochemicals to non-invasive biomedical applications is increasing. Although there are many traditional methods for extracting bioactive compounds or secondary metabolites, these processes come with many disadvantages like lower yield, longer process time, high energy consumption, more usage of solvent, yielding low active principles with low efficacy against diseases, poor quality, poor mass transfer, higher extraction temperature, etc. However, nullifying all these disadvantages of a non-thermal technology, ultrasound has played a significant role in delivering them with higher yield and improved bio-efficacy. The physical and chemical effects of acoustic cavitation are the crux of the output. This review paper primarily discusses the ultrasound-assisted extraction (USAE) of bioactives in providing non-invasive prevention and cure to diseases and bodily dysfunctions in human and animal models. The outputs of non-invasive bioactive components in terms of yield and the clinical efficacy in either in vitro or in vitro conditions are discussed in detail. The non-invasive biomedical applications of USAE bioactives providing anticancer, antioxidant, cardiovascular health, antidiabetic, and antimicrobial benefits are analyzed in-depth and appraised. This review additionally highlights the improved performance of USAE compounds against conventionally extracted compounds. In addition, an exhaustive analysis is performed on the role and application of the food bioactives in vivo and in vitro systems, mainly for promoting these efficient USAE bioactives in non-invasive biomedical applications. Also, the review explores the recovery of bioactives from the less explored food sources like cactus pear fruit, ash gourd, sweet granadilla, basil, kokum, baobab, and the food processing industrial wastes like peel, pomace, propolis, wine residues, bran, etc., which is rare in literature.

Ultrasound-Assisted Extraction of Natural Pigments From Food Processing By-Products: A Review

Ultrasound is an emerging technology, which has been highly explored in the food area to improve processes and products. When ultrasound is applied to a product with solid or fluid characteristics, the passage of acoustic waves and acoustic cavitation generates different mechanisms responsible for modifications in the original matrix of the sample. These effects of ultrasound can also be used to take advantage of by-products, for example by extracting compounds of interest, including natural pigments. Natural pigments or colorants are being highly demanded by different industries not only for color purposes but also due to their healthy properties, the greater demands in regulations and new consumer preferences. This review presents an updated critical analysis of the application of ultrasound-assisted extraction (UAE) to obtain natural pigments from food processing by-products. Initially, the ultrasound effects and mechanisms that improve the extraction of natural pigments in a fluid medium, as well as the factors that influence the extraction and the energy consumption of UAE are analyzed and described. Subsequently, the UAE application to obtain pigments belonging to the groups of carotenoids, chlorophyll, anthocyanins and betalains is evaluated. These sections detail the processing conditions, positive and negative effects, as well as possible applications of the extracted pigments. This review presents relevant information that may be useful to expand and explore new applications of ultrasound technology as well as promote the revaluation of by-products to obtain pigments that can be used in food, pharmaceutical or cosmetic industries.

Optimization of Ultrasound-Assisted Cellulase Extraction from Nymphaea hybrid Flower and Biological Activities: Antioxidant Activity, Protective Effect against ROS Oxidative Damage in HaCaT Cells and Inhibition of Melanin Production in B16 Cells

In this study, ultrasonic-assisted cellulase extraction (UCE) was applied to extract flavonoids and polyphenols from the Nymphaea hybrid flower. The extraction conditions were optimized using the response surface method (RSM) coupled with a Box-Behnken design. The crude extract of Nymphaea hybrid (NHE) was further purified using AB-8 macroporous resins, and the purified extract (NHEP) was characterized by FTIR and HPLC. In vitro activity determination by chemical method showed that NHEP displayed strong free radical scavenging abilities against the DPPH and ABTS radicals, good reduction power, and hyaluronidase inhibition. The cell viability by CCK-8 assays showed that NHEP had no significant cytotoxicity for B16 and HaCaT cells when the concentration was below 100 μg/mL and 120 μg/mL, respectively. NHEP with a concentration of 20–160 μg/mL can more effectively reduce the ROS level in H₂O₂ damaged HaCaT cells compared with 10 μg/mL of VC. The 40 μg/mL of NHEP had similar activity against intracellular melanin production in the B16 melanoma cells compared with 20 μg/mL Kojic acid. Good activities of antioxidation, whitening and protective effect against H₂O₂-induced oxidative damage promote the potential for NHEP as a functional raw material in the field of cosmetics and medicine.

Alternative Methods of Bioactive Compounds and Oils Extraction from Berry Fruit By-Products—A Review

Berry fruit by-products are a source of polyphenol compounds and highly nutritious oils and can be reused to fulfill the requirements of the circular economy model. One of the methods of obtaining polyphenol-rich extracts or oils is extraction. Applying conventional solvent extraction techniques may be insufficient to reach high polyphenol or lipid fraction yields and selectivity of specific compounds. Alternative extraction methods, mainly ultrasound-assisted extraction, pulsed electric field-assisted extraction, microwave-assisted extraction and supercritical fluid extraction, are ways to improve the efficiency of the isolation of bioactive compounds or oils from berry fruit by-products. Additionally, non-conventional techniques are considered as green extraction methods, as they consume less energy, solvent volume and time. The aim of this review is to summarize the studies on alternative extraction methods and their relationship to the composition of extracts or oils obtained from berry waste products.

Up-To-Date Analysis of the Extraction Methods for Anthocyanins: Principles of the Techniques, Optimization, Technical Progress, and Industrial Application

Nowadays, food industries are concerned about satisfying legal requirements related to waste policy and environmental protection. In addition, they take steps to ensure food safety and quality products that have high nutritional properties. Anthocyanins are considered high added-value compounds due to their sensory qualities, colors, and nutritional properties; they are considered bioactive ingredients. They are found in high concentrations in many by-products across the food industry. Thus, the non-conventional extraction techniques presented here are useful in satisfying the current food industry requirements. However, selecting more convenient extraction techniques is not easy. Multiple factors are implicated in the decision. In this review, we compile the most recent applications (since 2015) used to extract anthocyanins from different natural matrices, via conventional and non-conventional extraction techniques. We analyze the main advantages and disadvantages of anthocyanin extraction techniques from different natural matrices and discuss the selection criteria for sustainability of the processes. We present an up-to-date analysis of the principles of the techniques and an optimization of the extraction conditions, technical progress, and industrial applications. Finally, we provide a critical comparison between these techniques and some recommendations, to select and optimize the techniques for industrial applications.

Optimized Extraction and Characterization of Folates From Date Palm Fruits and Their Tracking During Fruits Wine Fermentation

Folates belong to the essential B vitamins group and participate in one-carbon metabolism. Date palm fruits (Phoenix dactilyfera L. family Arecaceae) are consumed by millions of people and are good sources of folates. To date, no detailed study has been carried out on suitable methods for folate extraction from date palm fruits. In the present study, an experimental design using response surface methodology (RSM) was used to maximize the extraction yield of folates from date palm fruits by including enzymatic depectinization. By applying this new strategy and a UHPLC-MS/MS technique for analysis, total folate and different folate vitamers of three cultivars of date palm fruits (Muzafti, Zahdi, and Rubai), brewer's yeast, and fermented date wine were analyzed. The optimized extraction conditions of folates from date palm fruits were found to be a pectinase activity of 47.7 U, an incubation temperature of 40°C, and an incubation time of 38 min, which yielded a total folate content of 191–301 μg/100 g. In brewer's yeast, the extracted total folate content was very high (4,870 μg/100 g), and, in the resulting date wine, it reached a maximum of 700 μg/L on the fifth day. The predominant folate vitamers in date fruit and fruit wine were 5-formyltetrahydrofolate (5-CHO-THF) and 5-methyltetrahydrofolate (5-CH₃-THF). During date palm fruit fermentation for up to 8 days, the 5-CHO-THF content gradually decreased by 20%, while 5-CH₃-THF increased linearly from day 1 to day 5 (y = 0.058 x + 0.0284, R² = 0.9614). This study shows that date palm fruit and fruit wine are excellent sources of folate, and further study can be focused on different methods to improve folate stability during wine storage.

Anthocyanins Recovered from Agri-Food By-Products Using Innovative Processes: Trends, Challenges, and Perspectives for Their Application in Food Systems

Anthocyanins are naturally occurring phytochemicals that have attracted growing interest from consumers and the food industry due to their multiple biological properties and technological applications. Nevertheless, conventional extraction techniques based on thermal technologies can compromise both the recovery and stability of anthocyanins, reducing their global yield and/or limiting their application in food systems. The current review provides an overview of the main innovative processes (e.g., pulsed electric field, microwave, and ultrasound) used to recover anthocyanins from agri-food waste/by-products and the mechanisms involved in anthocyanin extraction and their impacts on the stability of these compounds. Moreover, trends and perspectives of anthocyanins' applications in food systems, such as antioxidants, natural colorants, preservatives, and active and smart packaging components, are addressed. Challenges behind anthocyanin implementation in food systems are displayed and potential solutions to overcome these drawbacks are proposed.