Patterning Cell and Tissue Function

System for Patterning Polydopamine and VAPG Peptide on Polytetrafluoroethylene and Biodegradable Polyesters for Patterned Growth of Smooth Muscle Cells In Vitro

Biomaterial's surface functionalization for selective adhesion and patterned cell growth remains essential in developing novel implantable medical devices for regenerative medicine applications. We built and applied a 3D-printed microfluidic device to fabricate polydopamine (PDA) patterns on the surface of polytetrafluoroethylene (PTFE), poly(l-lactic acid-co-D,l-lactic acid) (PLA), and poly(lactic acid-co-glycolic acid) (PLGA). Then, we covalently attached the Val-Ala-Pro-Gly (VAPG) peptide to the created PDA pattern to promote the adhesion of the smooth muscle cells (SMCs). We proved that the fabrication of PDA patterns allows for the selective adhesion of mouse fibroblast and human SMCs to PDA-patterned surfaces after only 30 min of in vitro cultivation. After 7 days of SMC culture, we observed the proliferation of cells only along the patterns on PTFE but over the entire surface of the PLA and PLGA, regardless of patterning. This means that the presented approach is beneficial for application to materials resistant to cell adhesion and proliferation. The additional attachment of the VAPG peptide to the PDA patterns did not bring measurable benefits due to the high increase in adhesion and patterned cell proliferation by PDA itself.

Perfusable cell-laden micropatterned hydrogels for delivery of spatiotemporal vascular-like cues to tissues

The integration of vasculature at physiological scales within 3D cultures of cell-laden hydrogels for the delivery of spatiotemporal mass transport, chemical and mechanical cues, is a stepping-stone towards building in vitro tissue models that recapitulate in vivo cues. To address this challenge, we present a versatile method to micropattern adjoining hydrogel shells with a perfusable channel or lumen core, for enabling facile integration with fluidic control systems, on one hand, and to cell-laden biomaterial interfaces, on the other hand. This microfluidic imprint lithography methodology utilizes the high tolerance and reversible nature of the bond alignment process to lithographically position multiple layers of imprints within a microfluidic device for sequential filling and patterning of hydrogel lumen structures with single or multiple shells. Through fluidic interfacing of the structures, the ability to deliver physiologically relevant mechanical cues for recapitulating cyclical stretch on the hydrogel shell and shear stress on endothelial cells in the lumen are validated. We envision application of this platform for recapitulation of the bio-functionality and topology of micro-vasculatures, alongside the ability to deliver transport and mechanical cues, as needed for 3D culture to construct in vitro tissue models.

Enhancing metabolic activity and differentiation potential in adipose mesenchymal stem cells via high-resolution surface-acoustic-wave contactless patterning

Acoustofluidics has shown great potential for label-free bioparticle patterning with excellent biocompatibility. Acoustofluidic patterning enables the induction of cell-cell interactions, which play fundamental roles in organogenesis and tissue development. One of the current challenges in tissue engineering is not only the control of the spatial arrangement of cells but also the preservation of cell patterns over time. In this work, we developed a standing surface acoustic wave-based platform and demonstrated its capability for the well-controlled and rapid cell patterning of adipose-derived mesenchymal stem cells in a high-density homogenous collagen hydrogel. This biocompatible hydrogel is easily UV crosslinked and can be retrieved within 3 min. Acoustic waves successfully guided the cells toward pressure nodal lines, creating a contactless alignment of cells in <5 s in culture media and <1 min in the hydrogel. The acoustically patterned cells in the hydrogel did not show a decrease in cell viability (>90%) 48 h after acoustic induction. Moreover, 45.53% and 30.85% increases in metabolic activity were observed in growth and differentiation media, respectively, on Day 7. On Day 14, a 32.03% change in metabolic activity was observed using growth media, and no significant difference was observed using differentiation media. The alkaline phosphatase activity showed an increase of 80.89% and 24.90% on Days 7 and 14, respectively, for the acoustically patterned cells in the hydrogel. These results confirm the preservation of cellular viability and improved cellular functionality using the proposed high-resolution acoustic patterning technique and introduce unique opportunities for the application of stem cell regenerative patches for the emerging field of tissue engineering.

Macroscopic Banding Pattern of Collagen Gel Formed by a Diffusion-Reaction Process

Shapes and patterns observed in internal organs and tissues are reproducibly and robustly produced over a long distance (up to millimeters in length). The most fundamental remaining question is how these long geometries of shape and pattern form arise from the genetic message. Recent studies have demonstrated that extracellular matrix (ECM) critically participates as a structural foundation on which cells can organize and communicate. ECMs may be a key to understanding the underlying mechanisms of long-distance patterning and morphogenesis. However, previous studies in this field mainly focused on the complexes and interaction of cells and ECM. This paper pays particular attention to ECM and demonstrates that collagen, a major ECM component, natively possesses the reproducible and definite patterning ability reaching centimeter-scale length. The macroscopic pattern consists of striped transparent layers. The observation under crossed Nicols demonstrates that the layers consist of alternately arranged polarized and unpolarized parts. Confocal fluorescence microscopy studies revealed that the polarized and unpolarized segments include collagen-rich and -poor regions, respectively. The patterning process was proposed based on the Liesegang banding formation, which are mineral precipitation bands formed in hydrogel matrixes. These findings will give hints to the questions about long-distance cell alignment and provide new clues to artificially control cell placement over micron size in the field of regenerative medicine.

Mechanical Cues Affect Migration and Invasion of Cells From Three Different Directions

Cell migration and invasion is a key driving factor for providing essential cellular functions under physiological conditions or the malignant progression of tumors following downward the metastatic cascade. Although there has been plentiful of molecules identified to support the migration and invasion of cells, the mechanical aspects have not yet been explored in a combined and systematic manner. In addition, the cellular environment has been classically and frequently assumed to be homogeneous for reasons of simplicity. However, motility assays have led to various models for migration covering only some aspects and supporting factors that in some cases also include mechanical factors. Instead of specific models, in this review, a more or less holistic model for cell motility in 3D is envisioned covering all these different aspects with a special emphasis on the mechanical cues from a biophysical perspective. After introducing the mechanical aspects of cell migration and invasion and presenting the heterogeneity of extracellular matrices, the three distinct directions of cell motility focusing on the mechanical aspects are presented. These three different directions are as follows: firstly, the commonly used invasion tests using structural and structure-based mechanical environmental signals; secondly, the mechano-invasion assay, in which cells are studied by mechanical forces to migrate and invade; and thirdly, cell mechanics, including cytoskeletal and nuclear mechanics, to influence cell migration and invasion. Since the interaction between the cell and the microenvironment is bi-directional in these assays, these should be accounted in migration and invasion approaches focusing on the mechanical aspects. Beyond this, there is also the interaction between the cytoskeleton of the cell and its other compartments, such as the cell nucleus. In specific, a three-element approach is presented for addressing the effect of mechanics on cell migration and invasion by including the effect of the mechano-phenotype of the cytoskeleton, nucleus and the cell's microenvironment into the analysis. In precise terms, the combination of these three research approaches including experimental techniques seems to be promising for revealing bi-directional impacts of mechanical alterations of the cellular microenvironment on cells and internal mechanical fluctuations or changes of cells on the surroundings. Finally, different approaches are discussed and thereby a model for the broad impact of mechanics on cell migration and invasion is evolved.

Effects of nanostructures and mouse embryonic stem cells on in vitro morphogenesis of rat testicular cords

Morphogenesis of tubular structures is a common event during embryonic development. The signals providing cells with topographical cues to define a cord axis and to form new compartments surrounded by a basement membrane are poorly understood. Male gonadal differentiation is a late event during organogenesis and continues into postnatal life. The cellular changes resemble the mechanisms during embryonic life leading to tubular structures in other organs. Testicular cord formation is dependent on and first recognized by SRY-dependent aggregation of Sertoli cells leading to the appearance of testis-specific cord-like structures. Here we explored whether testicular cells use topographical cues in the form of nanostructures to direct or stimulate cord formation and whether embryonic stem cells (ES) or soluble factors released from those cells have an impact on this process. Using primary cell cultures of immature rats we first revealed that variable nanogratings exerted effects on peritubular cells and on Sertoli cells (at less than <1000 cells/mm²) by aligning the cell bodies towards the direction of the nanogratings. After two weeks of culture testicular cells assembled into a network of cord-like structures. We revealed that Sertoli cells actively migrate towards existing clusters. Contractions of peritubular cells lead to the transformation of isolated clusters into cord-like structures. The addition of mouse ES cells or conditioned medium from ES cells accelerated this process. Our studies show that epithelial (Sertoli cell) and mesenchymal (peritubular cells) cells crosstalk and orchestrate the formation of cords in response to physical features of the underlying matrix as well as secretory factors from ES cells. We consider these data on testicular morphogenesis relevant for the better understanding of mechanisms in cord formation also in other organs which may help to create optimized in vitro tools for artificial organogenesis.

Electrospun fibrous mats on lithographically micropatterned collectors to control cellular behaviors

Spatial arrangement of multiple cell types plays a critical role in maintaining the viability of cells and functionality of tissues. Micropatterning has been used to fabricate scaffolds to modulate cell distribution, growth, and functions for reconstructing the anisotropy in native tissues. In the current study, a glass substrate patterned with an electrically conductive circuit was prepared by lithography as a collector for electrospinning. Densely packed fibers were deposited on the top of silver strips and patterned fibrous mats were obtained with distinct ridge and groove areas. Orthogonal alignment was shown for fibers in the ridge and groove areas, and the pattern feature and fiber alignment were well maintained in the ridge during incubation of cells with patterned fibrous mats. Sequential confocal laser scanning from the top of cell-loaded fibrous mats indicated that a larger number of cells were spread in the ridge than that in the groove areas, and cells penetrated into the fibrous mats in the ridge. Microscopic observation and immunofluorescent staining indicated that cells and collagen deposition appeared to have distinct patterns on the fibrous scaffold and aligned along the directionality of fibers with an elongated morphology. It is concluded that lithography can provide the design flexibility of collectors with micrometer-scale precision patterning, and cells can be confined to precise locations, sizes, and shapes by the use of micropatterned fibrous scaffolds without any adverse effect on the cell viability and function. The results suggest the potential of patterned electrospun fibrous mats to construct complex tissues of well organized multiple cell types and with spatially distributed extracellular matrices.

Micropatterned cell sheets with defined cell and extracellular matrix orientation exhibit anisotropic mechanical properties

For an arterial replacement graft to be effective, it must possess the appropriate strength in order to withstand long-term hemodynamic stress without failure, yet be compliant enough that the mismatch between the stiffness of the graft and the native vessel wall is minimized. The native vessel wall is a structurally complex tissue characterized by circumferentially oriented collagen fibers/cells and lamellar elastin. Besides the biochemical composition, the functional properties of the wall, including stiffness, depend critically on the structural organization. Therefore, it will be crucial to develop methods of producing tissues with defined structures in order to more closely mimic the properties of a native vessel. To this end, we sought to generate cell sheets that have specific ECM/cell organization using micropatterned polydimethylsiloxane (PDMS) substrates to guide cell organization and tissue growth. The patterns consisted of large arrays of alternating grooves and ridges. Adult bovine aortic smooth muscle cells cultured on these substrates in the presence of ascorbic acid produced ECM-rich sheets several cell layers thick in which both the cells and ECM exhibited strong alignment in the direction of the micropattern. Moreover, mechanical testing revealed that the sheets exhibited mechanical anisotropy similar to that of native vessels with both the stiffness and strength being significantly larger in the direction of alignment, demonstrating that the microscale control of ECM organization results in functional changes in macroscale material behavior.

Cell self-patterning on uniform PDMS-surfaces with controlled mechanical cues

The exploitation of cell-instructive scaffolds with uniform physical/chemical surfaces and controlled stiffness will be greatly useful in tissue engineering applications to resemble the extracellular matrix (ECM) or topographical appearance of native tissues. We herein describe a versatile and straightforward method to assemble a polydimethylsiloxane (PDMS)-composite structure in which a uniformly laminin-coated membrane is placed on top of a micropatterned substrate that applies a stiffness gradient. This 'double-sheet' structure provides soft or stiff microdomains that guide the self-patterning of different cell types [e.g. chronic myeloid leukemia (KU812), cervix carcinoma (HeLa), NIH 3T3 and BJ], thereby stimulating their cytoskeletal remodeling. More interestingly, we used these uniform PDMS surfaces with patterned rigidity for obtaining co-cultures of tumor blood cells (KU812) and adherent fibroblasts (NIH 3T3) with spatially-controlled distribution. Thus, beyond single-cell stiffening and mechanosensing, these surfaces should also be used as simple and feasible co-culture systems for mimicking and dissecting the bidirectional interactions between blood cells and specific stromal elements of their in vivo microenvironment.

Synergistic regulation of cell function by matrix rigidity and adhesive pattern

Cell-extracellular matrix (ECM) interactions play a critical role in regulating cellular behaviors. Recent studies of cell-ECM interactions have mainly focused on the actomyosin based and adhesion mediated mechanosensing pathways to understand how individual mechanical signals in the cell microenvironment, such as matrix rigidity and adhesive ECM pattern, are sensed by the cell and further trigger downstream intracellular signaling cascades and cellular responses. However, synergistic and collective regulation of cellular behaviors by matrix rigidity and adhesive ECM pattern are still elusive and largely uncharacterized. Here, we generated a library of microfabricated polydimethylsiloxane (PDMS) micropost arrays to study the synergistic and independent effects of matrix rigidity and adhesive ECM pattern on mechanoresponsive behaviors of both NIH/3T3 fibroblasts and human umbilical vein endothelial cells (HUVECs). We showed that both cell types were mechanosensitive and their cell spreading, FA formation, cytoskeletal contractility, and proliferation were all strongly dependent on both substrate rigidity and adhesive ECM pattern. We further showed that under the same substrate rigidity condition, smaller and closer adhesive ECM islands would cause both cells to spread out more, form more adhesion structures, and have a higher proliferation rate. The influence of adhesive ECM pattern on rigidity-mediated cytoskeletal contractility was cell type specific and was only significant for NIH/3T3. Morphometric analysis of cell populations revealed a strong correlation between focal adhesion and cell spreading, regardless of substrate rigidity and adhesive ECM pattern. We also observed a strong correlation between cellular traction force and cell spreading, with a substantially smaller independent effect of substrate rigidity on traction force. Our study here had determined key aspects of the biomechanical responses of adherent cells to independent and collective changes of substrate rigidity and adhesive ECM pattern.

Intravascular pillars and pruning in the extraembryonic vessels of chick embryos

To investigate the local mechanical forces associated with intravascular pillars and vessel pruning, we studied the conducting vessels in the extraembryonic circulation of the chick embryo. During the development days 13-17, intravascular pillars and blood flow parameters were identified using fluorescent vascular tracers and digital time-series video reconstructions. The geometry of selected vessels was confirmed by corrosion casting and scanning electron microscopy. Computational simulations of pruning vessels suggested that serial pillars form along pre-existing velocity streamlines; blood pressure demonstrated no obvious spatial relationship with the intravascular pillars. Modeling a Reynolds number of 0.03 produced 4 pillars at approximately 20-μm intervals matching the observed periodicity. In contrast, a Reynolds number of 0.06 produced only 2 pillars at approximately 63-μm intervals. Our modeling data indicated that the combination of wall shear stress and gradient of shear predicted the location, direction, and periodicity of developing pillars.

Critical areas of cell adhesion on micropatterned surfaces

The adhesive area is important to modulate cell behaviors on a substrate. This paper aims to semi-quantitatively examine the existence of the characteristic areas of cell adhesion on the level of individual cells. We prepared a series of micropatterned surfaces with adhesive microislands of various sizes on an adhesion-resistant background, and cultured cells of MC3T3-E1 (osteoblast), BMSC (bone mesenchymal stem cell) or NIH3T3 (fibroblast) on those modeled surfaces. We have defined seven characteristic areas of an adhesive microisland and confirmed that they are meaningful to describe cell adhesion behaviors. Those parameters are (1) the critical adhesion area from apoptosis to survival denoted as A∗ or A(c₁), (2) the critical area from adhesion of a single cell to adhesion of multiple cells (A(c₂)), (3) the basic area for one more cell to adhere (A(Δ)), (4) and (5) the characteristic areas of a microisland most probably occupied by one cell (A(peak₁) and two cells (A(peak₂)), (6) and (7) the characteristic areas of a microisland occupied by one cell (A(N₁)) or two cells (A(N₂)) on average. Besides the introduction of those basic parameters, the present paper demonstrates how to determine them experimentally. We further discussed the relationship between those characteristic areas and the spreading area on a non-patterned adhesive surface.

Transwells with microstamped membranes produce micropatterned two-dimensional and three-dimensional co-cultures

This article describes a simple and rapid cell patterning method to form co-culture microarrays in commercially available Transwells. A thin poly(dimethylsiloxane) (PDMS) layer is printed on the underside of a Transwell using a PDMS stamp. Arbitrary cellular patterns are generated according to the geometric features of the thin PDMS layer through hydrodynamic forces that guide cells onto the membrane only over the PDMS-uncoated regions. Micropatterns of surface-adhered cells (we refer to this as two-dimensional) or non-surface-adhered clusters of cells (we refer to this as three-dimensional) can be generated depending on the surface treatment of the filter membrane. Additionally, co-cultures can be established by introducing different types of cells on the membrane or in the bottom chamber of the Transwell. We show that this co-culture method can evaluate mouse embryonic stem (mES) cell differentiation based on heterogeneous cell-cell interactions. Co-culture of mES cells and HepG2 cells decreased SOX17 expression of mES cells, and direct cell-cell contact further decreased SOX17 expression, indicating that co-culture with HepG2 cells inhibits endoderm differentiation through soluble factors and cell-cell contact. This method is simple and user-friendly and should be broadly useful to study cell shapes and cell-cell interactions.

The non-equilibrium thermodynamics and kinetics of focal adhesion dynamics

Background

We consider a focal adhesion to be made up of molecular complexes, each consisting of a ligand, an integrin molecule, and associated plaque proteins. Free energy changes drive the binding and unbinding of these complexes and thereby controls the focal adhesion's dynamic modes of growth, treadmilling and resorption.

Principal Findings

We have identified a competition among four thermodynamic driving forces for focal adhesion dynamics: (i) the work done during the addition of a single molecular complex of a certain size, (ii) the chemical free energy change associated with the addition of a molecular complex, (iii) the elastic free energy change associated with deformation of focal adhesions and the cell membrane, and (iv) the work done on a molecular conformational change. We have developed a theoretical treatment of focal adhesion dynamics as a nonlinear rate process governed by a classical kinetic model. We also express the rates as being driven by out-of-equilibrium thermodynamic driving forces, and modulated by kinetics. The mechanisms governed by the above four effects allow focal adhesions to exhibit a rich variety of behavior without the need to introduce special constitutive assumptions for their response. For the reaction-limited case growth, treadmilling and resorption are all predicted by a very simple chemo-mechanical model. Treadmilling requires symmetry breaking between the ends of the focal adhesion, and is achieved by driving force (i) above. In contrast, depending on its numerical value (ii) causes symmetric growth, resorption or is neutral, (iii) causes symmetric resorption, and (iv) causes symmetric growth. These findings hold for a range of conditions: temporally-constant force or stress, and for spatially-uniform and non-uniform stress distribution over the FA. The symmetric growth mode dominates for temporally-constant stress, with a reduced treadmilling regime.

Significance

In addition to explaining focal adhesion dynamics, this treatment can be coupled with models of cytoskeleton dynamics and contribute to the understanding of cell motility.

Gradient lithography of engineered proteins to fabricate 2D and 3D cell culture microenvironments

Spatial patterning of proteins is a valuable technique for many biological applications and is the prevailing tool for defining microenvironments for cells in culture, a required procedure in developmental biology and tissue engineering research. However, it is still challenging to achieve protein patterns that closely mimic native microenvironments, such as gradient protein distributions with desirable mechanical properties. By combining projection dynamic mask lithography and protein engineering with non-canonical photosensitive amino acids, we demonstrate a simple, scalable strategy to fabricate any user-defined 2D or 3D stable gradient pattern with complex geometries from an artificial extracellular matrix (aECM) protein. We show that the elastic modulus and chemical nature of the gradient profile are biocompatible and allow useful applications in cell biological research.

Surface functionalization for protein and cell patterning

The interaction of biological systems with synthetic material surfaces is an important issue for many biological applications such as implanted devices, tissue engineering, cell-based sensors and assays, and more generally biologic studies performed ex vivo. To ensure reliable outcomes, the main challenge resides in the ability to design and develop surfaces or artificial micro-environment that mimic 'natural environment' in interacting with biomolecules and cells without altering their function and phenotype. At this effect, microfabrication, surface chemistry and material science play a pivotal role in the design of advanced in-vitro systems for cell culture applications. In this chapter, we discuss and describe different techniques enabling the control of cell-surface interactions, including the description of some techniques for immobilization of ligands for controlling cell-surface interactions and some methodologies for the creation of well confined cell rich areas.