Encapsulation of exemestane in polycaprolactone nanoparticles: optimization, characterization, and release kinetics

Nano-emulsion based on Santolina chamaecyparissus essential oil potentiates the cytotoxic and apoptotic effects of Doxorubicin: an in vitro study

AIM

This study was aimed at investigating the cytotoxic effect of a novel combination of doxorubicin (DOX) and nano-formulation of Santolina chamaecyparissus L. essential oil (SCEO-NANO) on hepatic (HepG2) and colon (HT29) cancer cell lines.

METHODS

A nano-emulsion was prepared by high-pressure homogenisation, then analysed by zetasizer and Fourier transform infrared spectroscopy. HepG2 and HT29 cells were used in in vitro tests for apoptosis detection.

RESULTS

Formulated droplet size increased in DOX@SCEO-NANO/DOX to 11.54 ± 0.02 with uniform distribution (PDI = 0.13 ± 0.01), when compared with SCEO-NANO (size: 8.91 ± 0.02 nm; PDI = 0.1 ± 0.02). In both cells, DOX@SCEO-NANO/DOX led to a considerable reduction in colony formation. Compared to DOX, apoprotein proteins were overexpressed in HepG2 cells, showing increases of 8.66-fold for caspase-3 and 4.24-fold for the Bax/Bcl-2 ratio. In HT29 cells, ROS-dependent necrosis and apoptosis were seen. Comparing DOX@SCEO-NANO/DOX versus DOX, greater levels of caspase-3 and the Bax/Bcl-2 ratio were observed.

CONCLUSION

The DOX@SCEO-NANO/DOX formulation showed potential for targeted eradication of colon adenocarcinoma and hepatocellular carcinoma cells.

Incorporation of exemestane into ternary nanosponge system for enhanced anti-tumor potential in breast cancer

The present investigation reports the potential of exemestane loaded cyclodextrin based nanosponges for the treatment of breast cancer. Fourier transform infrared, and nuclear magnetic resonance (NMR) spectroscopic analysis confirmed the encapsulation of ring B, C, and D of exemestane in the nanosponge cavity. In vitro studies demonstrated a 6.58-folds increase in the aqueous solubility and a 1.76-folds increase in the dissolution of exemestane in the optimized nanosponge formulation EF2. It also exhibited enhanced cytotoxicity in MCF-7 cell line. Pharmacokinetic studies revealed a 1.37-fold increase in Cmax and a 2.10-fold increase in oral bioavailability of EF2, as compared to its marketed product Aromasin®. Concomitantly, this nano-formulation reduced the tumor burden to 45.71% in a DMBA-induced breast cancer rat model. This EF2-treatment also improved the hematological parameters of the animals. Histopathology of breast tissue also presented reduction in characteristic cytoarchitectural features of breast tumor. In vivo toxicity studies demonstrated reduced hepatotoxicity of the nanosponge formulation when compared with Aromasin®. These results were further supported by histological studies of excised liver tissues, where the size of hepatocytes in EF2-treated animals was like the normal hepatocyte size. In conclusion, the encapsulation of exemestane in β-cyclodextrin nanosponge along-with HPMC E5 improved its aqueous solubility, bioavailability, and ultimately therapeutic efficacy for the treatment of breast cancer.

Development of Statistically Optimized Piperine-Loaded Polymeric Nanoparticles for Breast Cancer: In Vitro Evaluation and Cell Culture Studies

Piperine (PPN) is a natural alkaloid derived from black pepper (Piper nigrum L.) and has garnered substantial attention for its potential in breast cancer therapy due to its diverse pharmacological properties. However, its highly lipophilic characteristics and poor dissolution in biological fluids limit its clinical application. Therefore, to overcome this limitation, we formulate and evaluate PPN-encapsulated polycaprolactone (PCL) nanoparticles (PPN-PCL-NPs). The nanoparticles were prepared by a single-step nanoprecipitation method and further optimized by a formulation design approach. The influence of selected independent variables PCL (X1), poloxamer 188 (P-188; X2), and stirring speed (SS; X3) were investigated on the particle size (PS), polydispersity index (PDI), and % encapsulation efficiency (EE). The selected optimized nanoparticles were further assessed for stability, in vitro release, and in vitro antibreast cancer activity in the MCF-7 cancer cell line. The PS, PDI, zeta potential, and % EE of the optimized PPN-PCL-NPs were observed to be 107.61 ± 5.28 nm, 0.136 ± 0.011, -20.42 ± 1.82 mV, and 79.53 ± 5.22%, respectively. The developed PPN-PCL-NPs were stable under different temperature conditions with insignificant changes in their pharmaceutical attributes. The optimized PPN-PCL-NPs showed a burst release for the first 6 h and later showed sustained release for 48 h. The PPN-PCL-NPs exhibit exceptional cytotoxic effects in MCF-7 breast tumor cells in comparison with the native PPN. Thus, the formulation of PPN-loaded PCL-NPs can be a promising approach for better therapeutic efficacy against breast cancer.

Microfluidic-Assisted Formulation of ε-Polycaprolactone Nanoparticles and Evaluation of Their Properties and In Vitro Cell Uptake

The nanoprecipitation method was used to formulate ε-polycaprolactone (PCL) into fluorescent nanoparticles. Two methods of mixing the phases were evaluated: introducing the organic phase into the aqueous phase dropwise and via a specially designed microfluidic device. As a result of the nanoprecipitation process, fluorescein-loaded nanoparticles (NPs) with a mean diameter of 127 ± 3 nm and polydispersity index (PDI) of 0.180 ± 0.009 were obtained. The profiles of dye release were determined in vitro using dialysis membrane tubing, and the results showed a controlled release of the dye from NPs. In addition, the cytotoxicity of the NPs was assessed using an MTT assay. The PCL NPs were shown to be safe and non-toxic to L929 and MG63 cells. The results of the present study have revealed that PCL NPs represent a promising system for developing new drug delivery systems.

Hydrocortisone-Loaded Lipid-Polymer Hybrid Nanoparticles for Controlled Topical Delivery: Formulation Design Optimization and In Vitro and In Vivo Appraisal

The barrier functionalities of the skin offer a major but not insuperable hindrance for fabrication of skin delivery effective systems. This work aimed to develop an optimized lipid polymer hybrid nanoparticle and assess the skin delivery effectiveness of hydrocortisone (9.872 ± 0.361 × 10^-3 cm²/h) of a drug through the skin from an optimized formulation when compared with a drug solution. Meanwhile, histological examination after topical application of the optimized formulation showed a safe increase in epidermal thickness. In vivo, the optimized formulation showed promising anti-inflammatory activity in a croton oil-induced ear rosacea model. As an excellent anti-inflammatory agent, these findings propose that the use of lipomers could be a promising strategy to improve the topical effectiveness of hydrocortisone acetate (HCA) against inflammatory diseases. Collectively, these results support our view that lipid polymer hybrid nanoparticles can proficiently deliver hydrocortisone to the skin in treating skin inflammatory conditions.

Preparation and Characterization of a Novel Multiparticulate Dosage Form Carrying Budesonide-Loaded Chitosan Nanoparticles to Enhance the Efficiency of Pellets in the Colon

An attempt was made to conquer the limitation of orally administered nanoparticles for the delivery of budesonide to the colon. The ionic gelation technique was used to load budesonide on chitosan nanoparticles. The nanoparticles were investigated in terms of size, zeta potential, encapsulation efficiency, shape and drug release. Then, nanoparticles were pelletized using the extrusion-spheronization method and were investigated for their size, mechanical properties, and drug release. Pellets were subsequently coated with a polymeric solution composed of two enteric (eudragit L and S) and time-dependent polymers (eudragit RS) for colon-specific delivery. All formulations were examined for their anti-inflammatory effect in rats with induced colitis and the relapse of the colitis after discontinuation of treatment was also followed. The size of nanoparticles ranged between 288 ± 7.5 and 566 ± 7.7 nm and zeta potential verified their positive charged surface. The drug release from nanoparticles showed an initial burst release followed by a continuous release. Pelletized nanoparticles showed proper mechanical properties and faster drug release in acidic pH compared with alkaline pH. It was interesting to note that pelletized budesonide nanoparticles released the drug throughout the GIT in a sustained fashion, and had long-lasting anti-inflammatory effects while rapid relapse was observed for those treated with conventional budesonide pellets. It seems that there is a synergistic effect of nanoformulation of budesonide and the encapsulation of pelletized nanoparticles in a proper coating system for colon delivery that could result in a significant and long-lasting anti-inflammatory effect.

Exploring Various Techniques for the Chemical and Biological Synthesis of Polymeric Nanoparticles

Nanoparticles (NPs) have remarkable properties for delivering therapeutic drugs to the body's targeted cells. NPs have shown to be significantly more efficient as drug delivery carriers than micron-sized particles, which are quickly eliminated by the immune system. Biopolymer-based polymeric nanoparticles (PNPs) are colloidal systems composed of either natural or synthetic polymers and can be synthesized by the direct polymerization of monomers (e.g., emulsion polymerization, surfactant-free emulsion polymerization, mini-emulsion polymerization, micro-emulsion polymerization, and microbial polymerization) or by the dispersion of preformed polymers (e.g., nanoprecipitation, emulsification solvent evaporation, emulsification solvent diffusion, and salting-out). The desired characteristics of NPs and their target applications are determining factors in the choice of method used for their production. This review article aims to shed light on the different methods employed for the production of PNPs and to discuss the effect of experimental parameters on the physicochemical properties of PNPs. Thus, this review highlights specific properties of PNPs that can be tailored to be employed as drug carriers, especially in hospitals for point-of-care diagnostics for targeted therapies.

Biostimulation of Anaerobic Digestion Using Iron Oxide Nanoparticles (IONPs) for Increasing Biogas Production from Cattle Manure

The effect of synthesised IONPs employing a nontoxic leaf extract of Azadirachta indica as a reducing, capping, and stabilizing agent for increasing biogas and methane output from cattle manure during anaerobic digestion (AD) was investigated in this study. Furthermore, the UV-visible spectra examination of the synthesized nanoparticles revealed a high peak at 432 nm. Using a transmission electron microscope, the average particle size of IONPs observed was 30–80 nm, with irregular, ultra-small, semi-spherical shapes that were slightly aggregated and well-distributed. IONPs had a polydisparity index (PDI) of 219 nm and a zeta potential of −27.0 mV. A set of six bio-digesters were fabricated and tested to see how varying concentrations of IONPs (9, 12, 15, 18, and 21 mg/L) influenced biogas, methane output, and effluent chemical composition from AD at mesophilic temperatures (35 ± 2 °C). With 18 mg/L IONPs, the maximum specific biogas and methane production were 136.74 L/g of volatile solids (VS) and 64.5%, respectively, compared to the control (p < 0.05), which provided only 107.09 L/g and 51.4%, respectively. Biogas and methane production increased by 27.6% and 25.4%, respectively using 18 mg/L IONPs as compared to control. In all treatments, the pH of the effluent was increased, while total volatile fatty acids, total solids, volatile solids, organic carbon content, and dehydrogenase activity decreased. Total solid degradation was highest (43.1%) in cattle manure + 18 mg/L IONPs (T5). According to the results, the IONPs enhanced the yield of biogas and methane when compared with controls.

Microfluidicmixing system for precise PLGA-PEG nanoparticles size control

In this study, a microfluidic device was employed to produce polymeric nanoparticles (NPs) with well-controlled sizes. The influence of several parameters in the synthesis process, namely, polymer concentration, flow rate and flow rate ratio between the aqueous and organic solutions was investigated. To evaluate the NPs size effect, three diameters were selected (30, 50 and 70nm). Their cytocompatibility was demonstrated on endothelial cells and macrophages. Additionally, their efficacy to act as drug carriers was assessed in an in vitro inflammatory scenario. NPs loaded and released diclofenac (DCF) in a size-dependent profile (smaller sizes presented lower DCF content and higher release rate). Moreover, 30nm NPs were the most effective in reducing prostaglandin E₂ concentration. Therefore, this study demonstrates that microfluidics can generate stable NPs with controlled sizes, high monodispersity and enhanced batch-to-batch reproducibility. Indeed, NPs size is a crucial parameter for drug encapsulation, release and overall biological efficacy.

Development and preclinical evaluation of microneedle-assisted resveratrol loaded nanostructured lipid carriers for localized delivery to breast cancer therapy

Resveratrol (RVT) is one of the potent anticancer phytochemicals which has shown promising potential for breast cancer therapy. However, its short half-life and low bioavailability is a major hurdle in its effective use. In this study, we have developed nanostructured lipid carriers (NLCs) of RVT to enable localized delivery of the drug to the breast tissues using microneedle arrays to improve effectiveness. The NLCs were optimized using the Design of Experiments approach and characterized for their particle size, polydispersity index, zeta potential and entrapment efficiency. The RVT-NLCs delivered using microneedle array 1200 showed a higher permeation of RVT across the skin with lower skin retention compared to pure RVT. Further, RVT-NLCs showed higher anticancer activity on MDA-MB-231 breast cancer cell lines and enhanced internalization compared to pure RVT. Moreover, the RVT-NLCs were found to inhibit the migration of MDA-MB-231 breast cancer cell lines. Preclinical studies in rats showed that RVT-NLCs delivered via microneedles demonstrated a remarkable increase in the Cmax, Tmax and AUC0-inf, and a higher localization in breast tissue compared to pure RVT administered orally. These results suggests that the RVT-NLCs administered by microneedle array system is an effective strategy for the local delivery of RVT for breast cancer therapy.

Exemestane encapsulated polymer-lipid hybrid nanoparticles for improved efficacy against breast cancer: optimization,in vitrocharacterization and cell culture studies

Polymer-lipid hybrid nanoparticles (PLHNPs) are novel nanoplatforms for the effective delivery of a lipophilic drug in the management of a variety of solid tumors. The present work was designed to develop exemestane (EXE) encapsulated D-alpha-tocopheryl polyethylene glycol succinate (TPGS) based PLHNPs (EXE-TPGS-PLHNPs) for controlled delivery of EXE for breast cancer management. EXE-TPGS-PLHNPs were formulated by single-step nano-precipitation technique and statistically optimized by a 3³Box-Behnken design using Design expert^®software. The polycaprolactone (PCL;X₁), phospholipon 90 G (PL-90G;X₂), and surfactant (X₃) were selected as independent factors while particles size (PS;Y₁), polydispersity index (PDI;Y₂), and %entrapment efficiency (%EE;Y₃) were chosen as dependent factors. The average PS, PDI, and %EE of the optimized EXE-TPGS-PLHNPs was observed to be 136.37 ± 3.27 nm, 0.110 ± 0.013, and 88.56 ± 2.15% respectively. The physical state of entrapped EXE was further validated by Fourier-transform infrared spectroscopy, differential scanning calorimetry, and powder x-ray diffraction that revealed complete encapsulation of EXE in the hybrid matrix of PLHNPs with no sign of significant interaction between drug and excipients.In vitrorelease study in simulated gastrointestinal fluids revealed initial fast release for 2 h after that controlled release profile up to 24 h of study. Moreover, optimized EXE-TPGS-PLHNPs exhibited excellent stability in gastrointestinal fluids as well as colloidal stability in different storage concentrations. Furthermore, EXE-TPGS-PLHNPs exhibited distinctively higher cellular uptake and time and dose-dependent cytotoxicity against MCF-7 breast tumor cells compared to EXE-PLHNPs without TPGS and free EXE. The obtained results suggested that EXE-TPGS-PLHNPs can be a promising platform for the controlled delivery of EXE for the effective treatment of breast cancer.

Topical transdermal chemoprevention of breast cancer: where will nanomedical approaches deliver us?

Despite the high incidence of breast cancer, there are few pharmacological prevention strategies for the high-risk population and those that are available have low adherence. Strategies that deliver drugs directly to the breasts may increase drug local concentrations, improving efficacy, safety and acceptance. The skin of the breast has been proposed as an administration route for local transdermal therapy, which may improve drug levels in the mammary tissue, due to both deep local penetration and percutaneous absorption. In this review, we discuss the application of nanotechnology-based strategies for the delivery of well established and new agents as well as drug repurposing using the topical transdermal route to improve the outcomes of preventive therapy for breast cancer.

Cefotaxime Loaded Polycaprolactone Based Polymeric Nanoparticles with Antifouling Properties for In-Vitro Drug Release Applications

The objective of the present study was to achieve the successful encapsulation of a therapeutic agent to achieve antifouling functionality regarding biomedical applications. Considering nanotechnology, drug-loaded polycaprolactone (PCL)-based nanoparticles were prepared using a nano-precipitation technique by optimizing various process parameters. The resultant nano-formulations were investigated for in vitro drug release and antifouling applications. The prepared particles were characterized in terms of surface morphology and surface properties. Optimized blank and drug-loaded nanoparticles had an average size of 200 nm and 216 nm, respectively, with associated charges of -16.8 mV and -11.2 mV. Studies of the in vitro release of drug were carried out, which showed sustained release at two different pH, 5.5 and 7.4 Antifouling activity was observed against two bacterial strains, Gram-positive Staphylococcus aureus and Gram-negative Escherichia coli. The zone of inhibition of the optimized polymeric drug-loaded nanoparticle F-25 against both strains were compared with the pure drug. The gradual pH-responsive release of antibiotics from the biodegradable polymeric nanoparticles could significantly increase the efficiency and pharmacokinetics of the drug as compared to the pure drug. The acquired data significantly noted that the resultant nano-encapsulation of antifouling functionality could be a promising candidate for topical drug delivery systems and skin applications.

Thermoresponsive liquid crystalline formulation of Exemestane: Design and structural characterization

Exemestane (EXE), a drug used for the treatment of breast cancer, has limited aqueous solubility of 0.08 mg/mL and log P∼ 4.22. The only available marketed formulation in form of tablets possess limitations of poor oral absorption (∼ 42 %), low solubility, extensive hepatic metabolism and numerous adverse effects due to its peripheral absorption. In order to address these issues, an alternative route of topical application is attempted through a lamellar liquid crystal based formulation. Pluronic® was used as stabilizer due to its higher surface activity and gelling properties. The solubility enhancement of EXE was achieved using liquid crystal formulation. We have investigated the effect of concentration of oil, S_mix (surfactant - cosurfactant mixture) and EXE on lattice parameter, rheology and drug release for various combinations of the formulation. The small angle x-ray scattering (SAXS) measurement demonstrated an evidence of a lamellar structure with lattice parameter ∼15 nm, which increases with corresponding increase in oil and EXE due to increase in hydrophobic interactions leading to an expansion of lamella. The inter lamellar distance decreases at higher surfactant concentration, due to the distribution of the same amount of oil and drug within larger concentration of surfactant molecules. The rheology measurement exhibited gel like properties at low shear rate indicating soft gel formation, which converts to Newtonian type flowing liquid at higher shear rate. At constant S_mix with increasing oil content, the viscosity decreases, which is attributed to the dilution of the lamellar structures with oil. The temperature sweep rheology reveals a change in the viscosity near physiological temperature, which may be attributed to the structural transition of lamellae. The formulation remains gel like at room temperature, which aids in proper application to skin and converts it to free flowing liquid above 37 °C. The invitro drug release of optimized formulation for 24 h was ∼ 38 % at 37 °C, which increased to 50 % at 42 °C. Accordingly, this formulation containing thermoresponsive lamellar liquid crystal gels of EXE represents a viable option for hyperthermia induced enhanced drug release. The characteristic and advantageous features offered by this formulation includes improved bioavailability of EXE due to enhanced solubility, permeability and absorption.

Electrospraying Oxygen-Generating Microparticles for Tissue Engineering Applications

BACKGROUND

The facile preparation of oxygen-generating microparticles (M) consisting of Polycaprolactone (PCL), Pluronic F-127, and calcium peroxide (CPO) (PCL-F-CPO-M) fabricated through an electrospraying process is disclosed. The biological study confirmed the positive impact from the oxygen-generating microparticles on the cell growth with high viability. The presented technology could work as a prominent tool for various tissue engineering and biomedical applications.

METHODS

The oxygen-generated microparticles fabricated through electrospraying processes were thoroughly characterization through various methods such as X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR) analysis, and scanning electron microscopy (SEM)/SEM-Energy Dispersive Spectroscopy (EDS) analysis.

RESULTS

The analyses confirmed the presence of the various components and the porous structure of the microparticles. Spherical shape with spongy characteristic microparticles were obtained with negative charge surface (ζ = -16.9) and a size of 17.00 ± 0.34 μm. Furthermore, the biological study performed on rat chondrocytes demonstrated good cell viability and the positive impact of increasing the amount of CPO in the PCL-F-CPO-M.

CONCLUSION

This technological platform could work as an important tool for tissue engineering due to the ability of the microparticles to release oxygen in a sustained manner for up to 7 days with high cell viability.

Antisense LNA-loaded nanoparticles of star-shaped glucose-core PCL-PEG copolymer for enhanced inhibition of oncomiR-214 and nucleolin-mediated therapy of cisplatin-resistant ovarian cancer cells

We aimed to inhibit overexpressed oncomiR-214 in cisplatin (CIS)-resistant ovarian cancer (OC) and perform targeted therapy of sensitized cells using a novel polymeric drug delivery system (DDS). A system of nanoparticles (NPs) of star-shaped glucose-core polycaprolactone-polyethylene glycol (Glu-PCL-PEG) block copolymer containing cisplatin (CIS-PCL NPs) and locked nucleic acid (LNA) anti-miR-214 (LNA-PCL NPs) were prepared and anti-nucleolin aptamer was conjugated to the surface of prepared NPs to prepare Ap-CIS-PCL NPs and Ap-LNA-PCL NPs, respectively. The cancer-targeting ability of the NPs was confirmed and the CIS-resistant A2780 (A2780 R) cells were transfected with Ap-LNA-PCL NPs to inhibit oncomiR-214 and sensitize the cells to CIS. Next, the miR-214-inhibited cells were exposed to the Ap-CIS-NPs and the deracination efficiency of targeted DDS was evaluated. The oncomiR-214 in A2780 R cells were harnessed by Ap-LNA-PCL NPs, and nucleolin-mediated endocytosis of targeted polymeric DDSs containing CIS into miR-214-inhibited A2780 R cells caused enhanced apoptosis, which was further confirmed by apoptosis detection and evaluation of downstream genes expression. Targeted inhibition of miR-214 using the developed NPs containing LNA can decrease drug-resistant properties of cancer cells and may enhance the efficiency of targeted DDSs.

Parameter Optimization Of Injectable Polycaprolactone Microspheres Containing Curcumin Using Response Surface Methodology

The achievement of desirable pharmacokinetic parameters from particulate drug delivery systems are dependent on the physical characteristics of the systems namely, particle dimension, loading of therapeutic agent, encapsulation efficiency, in vitro release kinetics. This study aimed to evaluate the main and interaction effects of the formulation variables on those physical characteristics and also to optimize the best combination of the variables to formulate small size particles with high encapsulation efficiency. The results showed that all the process variables (amount of polycaprolactone and stirring speed) except the amount of surfactant contributed significantly to the parameters previously mentioned. The best optimized formulation was experimentally validated for the closeness to the theoretical estimates.

Fabrication, characterization, in vitro drug release and glucose uptake activity of 14-deoxy, 11, 12-didehydroandrographolide loaded polycaprolactone nanoparticles

Biodegradable polymer based novel drug delivery systems brought a considerable attention in enhancing the therapeutic efficacy and bioavailability of various drugs. 14-deoxy 11, 12-didehydro andrographolide (poorly water soluble compound) loaded polycaprolactone (nano-DDA) was synthesized using the solvent evaporation technique. Nano-DDA was characterized by scanning electron microscopy (SEM) and dynamic light scattering (DLS) studies. Fourier Transform InfraRed Spectroscopy (FTIR) was used to investigate the structural interaction between the drug and the polymer. Functional characterization of the formulation was determined using drug content, cellular uptake and in vitro drug release. 2-deoxy-D-[1-³H] glucose uptake assay was carried out to assess the antidiabetic potential of nano-DDA in L6 myotubes. The nano-DDA displayed spherical shape with a smooth surface (252.898 nm diameter), zeta potential, encapsulation and loading efficiencies of −38.9 mV, 91.98 ± 0.13% and 15.09 ± 0.18% respectively. No structural alteration between the drug and the polymer was evidenced (FTIR analysis). Confocal microscopy studies with rhodamine 123 loaded polycaprolactone nanoparticles (Rh123-PCL NPs) revealed the internalization of Rh123-PCL NPs in a time dependent manner in L6 myoblasts. A dose dependent increase in glucose uptake was observed for nano-DDA with a maximal uptake of 108.54 ± 1.42% at 100 nM on L6 myotubes, thereby proving its anti-diabetic efficacy. A biphasic pattern of in vitro drug release demonstrated an initial burst release at 24 h followed by a sustained release for up to 11 days. To conclude, our results revealed that nano-DDA formulation can be a potent candidate for antidiabetic drug delivery.

HPLC Methods for Quantitation of Exemestane-Luteolin and Exemestane-Resveratrol Mixtures in Nanoformulations

Two HPLC-DAD assays for the simultaneous quantitation of exemestane (EXE) and resveratrol (RES)-Mix 1-and EXE and luteolin (LUT)-Mix 2-in novel breast cancer therapy nanoformulations were developed. Calibration curves 15-30 µg/mL and samples were injected through an Inertsil ODS-3 (250 × 4.6 mm, 5 µm) column. The gradient elution for Mix 1 was methanol : 0.05% (v/v) acetic acid in water (60 : 40 to 80 : 20, linear over 2 min), and for Mix 2, it was methanol : water (60 : 40 for 4 min, then ramped linearly to 90 : 10, over 12 min) pumped at 1.5 mL/min for 4 min, then 1 mL/min till the end of run. EXE, RES, LUT and flutamide (internal standard (IS)) were measured at 246, 307, 350 and 300 nm, respectively. For Mix 1, RES, EXE and IS eluted at 3.5, 6.8 and 7.4 min, respectively, while for Mix 2, LUT, EXE and IS eluted at 7.5, 11.4 and 12.7 min, respectively. The mean r(2) for the standard curves was ≥0.99, and percentage coefficient of variation and % error of the mean were <2. Both assays successfully quantitated Mix 1 and Mix 2 in their nanoformulations. The two developed assays were sensitive and selective for the analysis of EXE-LUT and EXE-RES mixtures in nanoformulations according to International Conference on Harmonization guidelines.