Green synthesis of zinc oxide nanoparticles from the leaf, stem and in vitro grown callus of Mussaenda frondosa L.: characterization and their applications

Biosynthesis of ZnO nanoparticles using aqueous extracts of Eclipta prostrata and Piper longum: characterization and assessment of their antioxidant, antibacterial, and photocatalytic properties

Chemical syntheses of nanoparticles that release toxic substances into the environment rarely meet the strict requirements of green chemistry principles. Instead, green synthesis of nanoparticles using plant extracts brings a safe, rapid, and effective process, contributing to solving environmental pollution problems. Here, we report the green synthesis of multifunctional ZnO nanoparticles (ZnONPs) using aqueous extracts of E. prostrata leaves and P. longum fruits. The XRD results affirmed the existence of hexagonal crystalline ZnONPs with particle sizes of 17-30 nm. The optical analysis revealed bandgap energies of 3.10 eV and 3.16 eV for ZnONPs biosynthesized using E. prostrata and P. longum extracts, respectively. The synthesized ZnONPs showed potential antioxidant activity through DPPH and ABTS methods. Among the antibacterial outcomes against pathogenic bacterial strains (S. aureus, B. cereus, E. coli, and S. typhimurium), ZnONPs exhibited the highest zone of inhibition (18.5 mm) for S. aureus. Moreover, both ZnONPs biosynthesized using E. prostrata and P. longum extracts served as strong photocatalysts in the degradation of crystal violet with degradation efficiencies of 95.64% and 99.90%, respectively. Therefore, biosynthesized ZnONPs hold significant promise as antioxidants, antibacterial agents, and photocatalysts.

Advancements in Green Nanoparticle Technology: Focusing on the Treatment of Clinical Phytopathogens

Opportunistic pathogenic microbial infections pose a significant danger to human health, which forces people to use riskier, more expensive, and less effective drugs compared to traditional treatments. These may be attributed to several factors, such as overusing antibiotics in medicine and lack of sanitization in hospital settings. In this context, researchers are looking for new options to combat this worrying condition and find a solution. Nanoparticles are currently being utilized in the pharmaceutical sector; however, there is a persistent worry regarding their potential danger to human health due to the usage of toxic chemicals, which makes the utilization of nanoparticles highly hazardous to eukaryotic cells. Multiple nanoparticle-based techniques are now being developed, offering essential understanding regarding the synthesis of components that play a crucial role in producing anti-microbial nanotherapeutic pharmaceuticals. In this regard, green nanoparticles are considered less hazardous than other forms, providing potential options for avoiding the extensive harm to the human microbiome that is prevalent with existing procedures. This review article aims to comprehensively assess the current state of knowledge on green nanoparticles related to antibiotic activity as well as their potential to assist antibiotics in treating opportunistic clinical phytopathogenic illnesses.

Antifungal properties and molecular docking of ZnO NPs mediated using medicinal plant extracts

Significant postharvest losses and food safety issues persist in many developing nations, primarily due to fungal activities, including mycotoxin production. In this study, green synthesised zinc oxide nanoparticles (ZnO-NPs) were prepared from leaf extracts of Syzygium cordatum (ZnO 1), Lippia javanica (ZnO 2), Bidens pilosa (ZnO 3), and Ximenia caffra (ZnO 4). Physicochemical characteristics of the ZnO-NPs were determined using X-ray diffraction (XRD), Fourier transmission Infrared spectroscopy and ultraviolet-visible (UV-vis) spectroscopy, scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The XRD analysis confirmed the presence of a wurtzite crystal structure in the hexagonal shape of the ZnO nanoparticles (NPs), with an average size ranging between 25 and 43 nm. The microscopic examination of the morphology revealed the presence of spherical particles with sizes ranging from 37 to 47 nm in diameter. The antifungal efficacy of the ZnO-NPs was assessed against pathogenic plant fungi, including Botrytis sp. (STEU 7866), Penicillium sp. (STEU 7865), and Pilidiella granati (STEU 7864), using the poisoned food technique. Further antifungal evaluation of the ZnOPs was performed using the broth microdilution assay. A significant interaction between the type of ZnO-NPs and fungal species was observed, with the highest susceptibility in Mucor sp. to ZnO 2, achieving over 50% inhibition. Penicillium sp. also showed high susceptibility to all ZnO-NPs. Molecular docking results confirmed the strong H-bonding interactions of ZnO-NPs with fungal receptors in Mucor sp. and Penicillium sp., Botrytis sp. and P. granati exhibited the least susceptibility. Further tests revealed that ZnO 2 exhibited the highest inhibitory effect on Botrytis sp., with a low minimum inhibitory concentration (MIC) of 25 µg/mL, attributed to its larger positive zeta potential. This study indicates that ZnO NPs, particularly those mediated using Lippia javanica (ZnO 2), have promising potential as effective antifungal agents, which could play a significant role in reducing postharvest decay and losses.

Photo-catalytic and biological applications of phyto-functionalized zinc oxide nanoparticles synthesized using a polar extract of Equisetum diffusum D

In this study, zinc oxide nanoparticles (ZnO NPs) were fabricated using Equisetum diffusum D extract and their diverse properties and applications were studied. Phytochemical analysis confirmed the presence of phenols and flavonoids in the plant extract, playing a crucial role in the stabilization and reduction of the synthesized nanoparticles. The greenly synthesized ZnO NPs were characterized through a range of analytical techniques. UV-visible spectrophotometry has been employed to investigate their optical characteristics. FTIR spectroscopy was employed to identify the functional groups responsible for the synthesis of the ZnO NPs. The structural properties were evaluated using XRD. The morphology and size distribution of the synthesized NPs were examined using SEM, DLS, and elemental spectra evaluated using EDX. The charge that develops at the interface was analyzed using zeta potential which accounts for stability of the NPs. The ZnO NPs exhibited excellent photocatalytic degradation of cationic (methylene blue), anionic (methyl orange), and nonionic (p-nitrophenol) dyes under sunlight exposure with photocatalytic degradation of 85.61%, 79.10%, and 89.95% respectively. Additionally, the nanoparticles displayed antimicrobial activity against Gram-positive and Gram-negative bacteria, and noteworthy antioxidant potential. The anti-inflammatory activity of the ZnO NPs, attributed to their ability to inhibit protein denaturation, was dose-dependent. Overall, our findings highlight the versatile properties of the greenly synthesized ZnO NPs, showcasing their potential in environmental remediation, and antimicrobial formulations, and as promising candidates for further exploration in the biomedical fields, including drug delivery and therapeutics.

Synthesis and characterization of Pyrus communis fruit extract synthesized ZnO NPs and assessed their anti-diabetic and anti-microbial potential

The fruit Pyrus communis, owing to its presence of phenolics and flavonoids, was chosen for its nanoparticle's reducing and stabilizing properties. Furthermore, the zinc metal may be nano-absorbed by the human body. As a result, the study involves synthesizing zinc oxide nanoparticles (ZnO NPs) from P. communis fruit extract using the green method. The synthesized nanoparticle was examined with a UV-visible spectrophotometer, Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), and Dynamic Light Scattering (DLS). When absorption studies were performed with a UV-visible spectrophotometer, the nanoparticle exhibited a blue shift. The FTIR spectrum revealed the molecular groups present in both the fruit extract and metal. In the SEM analysis, the ZnO NPs appeared as spherical particles, agglomerated together, and of nano-size. The larger size of the ZnO NPs in DLS can be attributed to their ability to absorb water. After characterization, nanoparticles were tested for anti-diabetic (α-amylase and yeast glucose uptake activity) and anti-microbial properties. The α-amylase inhibition percentage was 46.46 ± 0.15% for 100 μg/mL, which was comparable to the acarbose inhibition percentage of 50.58 ± 0.67% at the same concentration. The yeast glucose uptake activity was 64.24 ± 0.80% at 20 mM glucose concentration, which was comparable to the standard of 78.03 ± 0.80. The nanoparticle was more effective against Gram-negative bacteria Shigella sp. and Salmonella typhi than against Gram-positive bacteria Bacillus cereus and Streptococcus pneumoniae.

From nature to nanomedicine: bioengineered metallic nanoparticles bridge the gap for medical applications

The escalating global challenge of antimicrobial resistance demands innovative approaches. This review delves into the current status and future prospects of bioengineered metallic nanoparticles derived from natural sources as potent antimicrobial agents. The unique attributes of metallic nanoparticles and the abundance of natural resources have sparked a burgeoning field of research in combating microbial infections. A systematic review of the literature was conducted, encompassing a wide range of studies investigating the synthesis, characterization, and antimicrobial mechanisms of bioengineered metallic nanoparticles. Databases such as PubMed, Scopus, Web of Science, ScienceDirect, Springer, Taylor & Francis online and OpenAthen were extensively searched to compile a comprehensive overview of the topic. The synthesis methods, including green and sustainable approaches, were examined, as were the diverse biological sources used in nanoparticle fabrication. The amalgamation of metallic nanoparticles and natural products has yielded promising antimicrobial agents. Their multifaceted mechanisms, including membrane disruption, oxidative stress induction, and enzyme inhibition, render them effective against various pathogens, including drug-resistant strains. Moreover, the potential for targeted drug delivery systems using these nanoparticles has opened new avenues for personalized medicine. Bioengineered metallic nanoparticles derived from natural sources represent a dynamic frontier in the battle against microbial infections. The current status of research underscores their remarkable antimicrobial efficacy and multifaceted mechanisms of action. Future prospects are bright, with opportunities for scalability and cost-effectiveness through sustainable synthesis methods. However, addressing toxicity, regulatory hurdles, and environmental considerations remains crucial. In conclusion, this review highlights the evolving landscape of bioengineered metallic nanoparticles, offering valuable insights into their current status and their potential to revolutionize antimicrobial therapy in the future.

Recent advancements in sustainable synthesis of zinc oxide nanoparticles using various plant extracts for environmental remediation

The sustainable synthesis of zinc oxide nanoparticles (ZnO-NPs) using plant extracts has gained significant attention in recent years due to its eco-friendly nature and potential applications in numerous fields. This synthetic approach reduces the reliance on non-renewable resources and eliminates the need for hazardous chemicals, minimizing environmental pollution and human health risks. These ZnO-NPs can be used in environmental remediation applications, such as wastewater treatment or soil remediation, effectively removing pollutants and improving overall ecosystem health. These NPs possess a high surface area and band gap of 3.2 eV, can produce both OH° (hydroxide) and O2-° (superoxide) radicals for the generation of holes (h+) and electrons (e-), resulting in oxidation and reduction of the pollutants in their valence band (VB) and conduction band (CB) resulting in degradation of dyes (95-100% degradation of MB, MO, and RhB dyes), reduction and removal of heavy metal ions (Cu2+, Pb2+, Cr6+, etc.), degradation of pharmaceutical compounds (paracetamol, urea, fluoroquinolone (ciprofloxacin)) using photocatalysis. Here, we review an overview of various plant extracts used for the green synthesis of ZnO NPs and their potential applications in environmental remediation including photocatalysis, adsorption, and heavy metal remediation. This review summarizes the most recent studies and further research perspectives to explore their applications in various fields.

Study of the antimicrobial activity of zinc oxide nanostructures mediated by two morphological structures of leaf extracts of Eucalyptus radiata

The growing microbial resistance against antibiotics and the development of resistant strains has shifted the interests of many scientists to focus on metallic nanoparticle applications. Although several metal oxide nanoparticles have been synthesized using green route approach to measure their antimicrobial activity, there has been little or no literature on the use of Eucalyptus robusta Smith aqueous leaf extract mediated zinc oxide nanoparticles (ZnONPs). The study therefore examined the effect of two morphological nanostructures of Eucalyptus robusta Sm mediated ZnONPs and their antimicrobial and antifungal potential on some selected pathogens using disc diffusion method. The samples were characterized using Scanning and Transmission Electron Microscopy, Energy-Dispersive Spectroscopy and Fourier Transform Infrared Spectroscopy. From the results, the two ZnO samples were agglomerated with zinc oxide nanocrystalline structure sample calcined at 400 °C (ZnO NS400) been spherical in shape while zinc oxide nanocrystalline structure sample calcined at 60 °C (ZnO NS60) was rod-like. The sample calcined at higher temperature recorded the smallest particle size of 49.16 ± 1.6 nm as compared to the low temperature calcined sample of 51.04 ± 17.5 nm. It is obvious from the results that, ZnO NS400 exhibited better antibacterial and antifungal activity than ZnO NS60. Out of the different bacterial and fungal strains, ZnO NS400 sample showed an enhanced activity against S. aureus (17.2 ± 0.1 mm) bacterial strain and C. albicans (15.7 ± 0.1 mm) fungal strain at 50 mg/ml. Since this sample showed higher antimicrobial and antifungal activity, it may be explored for its applications in some fields including medicine, agriculture, and aquaculture industry in combating some of the pathogens that has been a worry to the sector. Notwithstanding, the study also provides valuable insights for future studies aiming to explore the antimicrobial potential of other plant extracts mediated zinc oxide nanostructures.

Green synthesis of zinc oxide nano particles using Allium cepa L. waste peel extracts and its antioxidant and antibacterial activities

Synthesis of nanoparticles through the green approach using plant and vegetable extracts has gained popularity since they are thought to be efficient and cost-effective materials. This study is designed to synthesize zinc oxide nanoparticles (ZnO-NPs) from onion waste peel extract (Allium cepa L.) via the green synthesis approach. The synthesized ZnO-NPs were characterized by utilizing the UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), Energy Dispersive X-ray (EDX), Field Emission Scanning Electron Microscopy (FE-SEM) and X-ray Powder Diffraction (XRD)techniques. The nanoparticles formation was confirmed by the UV-Vis sharp absorption spectra at 318 and 322 nm. The synthesized ZnO-NPs size and shape was revealed by the XRD and SEM respectively. Smallest nanoparticle average crystallite size was found 57.38 nm with hexagonal shape. The bioactive functional groups that are in charge of capping and stabilizing the ZnO-NPs was assured by the FTIR data. Further, prepared ZnO-NPs were used to assess their possible antioxidant and antibacterial properties. DPPH test for free radical scavenging showed potential antioxidant properties of the synthesized ZnO-NPs. The antibacterial activity were studied against three clinical strains: P. aeruginosa, E. coli, and S. aureus with the maximum zone of inhibition 13.17 mm, 22.00 mm and 12.35 mm respectively at 100 μg/mL subsequently minimum inhibitory concentration was found 50 μg/mL for P. aeruginosa, and S. aureus whereas 100 μg/mL for E. coli. Antioxidant and antibacterial activity tests appear bio-resource based ZnO-NPs from Allium cepa L. extract have effects on free radical and growth of microorganisms.Therefore, it could be a promising candidates for agricultural and food safety applications as an effective antimicrobial agent against pathogenic microorganisms and also can address future biomedical applications after complete in vivo study.

Anticandidal effectiveness of greenly synthesized zinc oxide nanoparticles against candidal pathogens

Drug resistance of pathogenic candidal strains to conventional antifungal agents represents a significant health issue contributing to high morbidity worldwide. Hence, the aim of the current study focused on evaluating the antifungal and synergistic activities of the green synthesized zinc oxide nanoparticles formulated using Laurus nobilis leaf extract. The biogenic ZnONPs were hexagonal in shape with average particle size diameter of 37.98 nm and pure crystalline structure as detected by XRD data. The highest antifungal activity of biogenic ZnONPs was detected against Candida parapsilosis strain demonstrating relative inhibitory zone diameters of 17.13 ± 0.74 and 25.78 ± 0.47 mm, at the concentrations of 100 and 200 µg/disk, respectively. Moreover, the biogenic ZnONPs demonstrated the highest synergistic activity with clotrimazole antifungal agent against Candida glabrata followed by Candida auris strains. MTT assay revealed that the biogenic ZnONPs showed low toxicity demonstrating relative IC50 value of 774.45 µg/mL against normal lung fibroblast cells which further affirmed their biosafety for application. In conclusion, the bioinspired ZnONPs could be utilized for the formulation of effective antifungal agents against drug resistant candidal strains and also could be combined with antifungal agents to boost their antifungal efficiency.

Colloidal stability and dielectric behavior of eco-friendly synthesized zinc oxide nanostructures from Moringa seeds

This study centers on the environmentally benign synthesis of zinc oxide nanoparticles (ZnO NPs) derived from Zn (CH3COO)2·2H2O and Moringa seeds. The synthesized nanostructures underwent comprehensive characterization utilizing diverse analytical techniques, encompassing X-ray diffraction (XRD), UV-VIS spectroscopy, field-emission scanning electron microscopy (FESEM), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. XRD measurements coupled with W-H plot transformation unequivocally confirmed the formation of ZnO nanostructures, characterized by an average size of 24.9 nm. UV-VIS spectroscopy, complemented by Kubelka Munk curve analysis, elucidated the direct conduction and determined a bandgap of 3.265 eV. FESEM analysis revealed minimal particle aggregation, showcasing well-defined grain boundaries spanning sizes from 20.4 to 87.7 nm. XPS analysis substantiated the presence of Zn (2p), Zn (3p), Zn (3d), and O (1s). Raman spectroscopy identified E2H as the predominant mode, followed by E1(TO) and (E2H-E2L). ZnO thin films, fabricated via pulsed laser deposition (PLD) and deposited onto silicon (100) substrates, exhibited exemplary morphology and discernible topography, characterized by a normal grain size distribution. Zeta potential tests yielded a value of approximately ([Formula: see text] ~ - 43.8 mV), indicative of the commendable stability of the colloidal suspension, likely attributable to low particle aggregation. Dielectric measurements conducted on sintered pellets at 900 °C unveiled elevated capacitance and dielectric constant at low frequencies across the temperature range of 289.935-310 K. These findings affirm the potential utility of environmentally synthesized ZnO for a spectrum of applications, including energy devices and nanofluids.

Utilizing Cymbopogon Proximus Grass Extract for Green Synthesis of Zinc Oxide Nanorod Needles in Dye Degradation Studies

This study successfully synthesized zinc oxide nanorod needles (ZnO-NRNs) using an environmentally friendly method employing Cymbopogon Proximus extract. The resulting ZnO-NRNs exhibited exceptional physicochemical and structural properties, confirmed through various characterization techniques, including UV-Vis spectrophotometry, dynamic light scattering (DLS), transmission electron microscopy (TEM), X-ray diffraction (XRD), and energy-dispersive X-ray spectroscopy (EDX). The analysis revealed a hexagonal wurtzite structure with high crystallinity, a 3.6 eV band gap, and a notably blue-shifted absorption band. ZnO-NRNs showed impressive photocatalytic activity, degrading Rhodamine B dye by 97% under UV and visible sunlight, highlighting their photostability and reusability. This green synthesis process offers cost effectiveness and environmental sustainability for practical applications.

Green Extracts with Metal-based Nanoparticles for Treating Inflammatory Diseases: A Review

Globally, high death rates and poor quality of life are caused mainly by inflammatory diseases. Corticosteroids, which may have systemic side effects and would enhance the risk of infection, are the common forms of therapy. The field of nanomedicine has created composite nanoparticles that carry a pharmacological carrier and target ligands for distribution to sites of inflammation with less systemic toxicity. However, their relatively large size often causes systemic clearance. An interesting approach is metal-based nanoparticles that naturally reduce inflammation. They are made not only to be small enough to pass through biological barriers but also to allow label-free monitoring of their interactions with cells. The following literature review discusses the mechanistic analysis of the anti-inflammatory properties of several metal-based nanoparticles, including gold, silver, titanium dioxide, selenium, and zinc oxide. Current research focuses on the mechanisms by which nanoparticles infiltrate cells and the anti-inflammatory techniques using herbal extracts-based nanoparticles. Additionally, it provides a brief overview of the literature on many environmentally friendly sources employed in nanoparticle production and the mechanisms of action of various nanoparticles.

Papaya peel extract-mediated green synthesis of zinc oxide nanoparticles and determination of their antioxidant, antibacterial, and photocatalytic properties

This study describes an effective and eco-friendly approach to the synthesis of zinc oxide nanoparticles (ZnONPs) utilizing papaya fruit peel extract (PPE). The structural evaluation and morphological features of synthesized ZnONPs were examined using various physicochemical analyses. The formulated ZnONPs were spherical to hexagonal in shape with ⁓ 170 nm in diameter. ZnONPs exhibited improved antioxidant potential in terms of DPPH radical scavenging activity (IC50 = 98.74 µg/ml) and ferric-reducing potential compared with PPE. The antibacterial activity of ZnONPs was measured against pathogenic strains of Salmonella typhi, Bacillus subtilis, Staphylococcus aureus, and Escherichia coli. The biosynthesized ZnONPs showed potential antibacterial efficacy against all microbes. In addition, ZnONPs exhibited potential photocatalytic activity in rhodamine B degradation in the presence of sunlight. The results indicated that papaya peels, which are these fruit wastes, could be helpful for the green synthesis of ZnONPs with good dose-responsive antioxidant, antibacterial, and photocatalytic activities.

Polyol synthesis of one-dimensional Ag nanowires for the photocatalytic degradation of textile dye and effective removal of microbes

Due to the excess release of hazardous pollutants to the environment, the quest for the synthesis of effective nanomaterials for wastewater treatment is never-ending. Present study reports the polyol synthesis of Ag NWs of ~ 85 nm diameter and average length of 4.08 µm using PVP and ethylene glycol. The experimental data on the methylene blue dye degradation substantiated the photocatalytic efficiency of Ag NWs (88% degradation in 120 min). Furthermore, the Ag NWs exhibited microbial load reducing property in air conditioner condensate water (ACW) within a time period of 60 min. Also, the anti-bacterial effect of Ag NWs was estimated using two human pathogenic bacterial strains, namely Staphylococcus aureus and Bacillus cereus. The antibacterial potential of Ag NWs against Staphylococcus aureus and Bacillus cereus was revealed significant with an inhibition zone size of 14 ± 0.1 mm and 9 ± 0.1 mm, respectively. Hence, the present work validates the potential efficiency of Ag NWs in the degradation of textile dyes and reduction of microbial population.

Bioactive ZnO Nanoparticles: Biosynthesis, Characterization and Potential Antimicrobial Applications

In recent years, biosynthesized zinc oxide nanoparticles (ZnONPs) have gained tremendous attention because of their safe and non-toxic nature and distinctive biomedical applications. A diverse range of microbes (bacteria, fungi and yeast) and various parts (leaf, root, fruit, flower, peel, stem, etc.) of plants have been exploited for the facile, rapid, cost-effective and non-toxic synthesis of ZnONPs. Plant extracts, microbial biomass or culture supernatant contain various biomolecules including enzymes, amino acids, proteins, vitamins, alkaloids, flavonoids, etc., which serve as reducing, capping and stabilizing agents during the biosynthesis of ZnONPs. The biosynthesized ZnONPs are generally characterized using UV-VIS spectroscopy, TEM, SEM, EDX, XRD, FTIR, etc. Antibiotic resistance is a serious problem for global public health. Due to mutation, shifting environmental circumstances and excessive drug use, the number of multidrug-resistant pathogenic microbes is continuously rising. To solve this issue, novel, safe and effective antimicrobial agents are needed urgently. Biosynthesized ZnONPs could be novel and effective antimicrobial agents because of their safe and non-toxic nature and powerful antimicrobial characteristics. It is proven that biosynthesized ZnONPs have strong antimicrobial activity against various pathogenic microorganisms including multidrug-resistant bacteria. The possible antimicrobial mechanisms of ZnONPs are the generation of reactive oxygen species, physical interactions, disruption of the cell walls and cell membranes, damage to DNA, enzyme inactivation, protein denaturation, ribosomal destabilization and mitochondrial dysfunction. In this review, the biosynthesis of ZnONPs using microbes and plants and their characterization have been reviewed comprehensively. Also, the antimicrobial applications and mechanisms of biosynthesized ZnONPs against various pathogenic microorganisms have been highlighted.

Enhanced alpha-amylase inhibition activity of amine-terminated PAMAM dendrimer stabilized pure copper-doped magnesium oxide nanoparticles

The present work aims to prepare copper-doped MgO nanoparticles via a sol-gel approach and study their antidiabetic alpha-amylase inhibition activity with undoped MgO nanoparticles. The ability of G5 amine-terminated polyamidoamine (PAMAM) dendrimer for the controlled release of copper-doped MgO nanoparticles to exhibit alpha-amylase inhibition activity was also evaluated. The synthesis of MgO nanoparticles via sol-gel approach and optimization of calcination temperature and time has led to the formation of nanoparticles with different shapes (spherical, hexagonal, and rod-shaped) and a polydispersity in size ranging from 10 to 100 nm with periclase crystalline phase. The presence of copper ions in the MgO nanoparticles has altered their crystallite size, eventually modifying their size, morphology, and surface charge. The efficiency of dendrimer to stabilize spherical copper-doped MgO nanoparticles (ca. 30 %) is higher than in other samples, which was confirmed by UV-Visible, DLS, FTIR, and TEM analysis. The amylase inhibition assay emphasized that the dendrimer nanoparticles stabilization has led to the prolonged enzyme inhibition ability of MgO and copper-doped MgO nanoparticles for up to 24 h.

Antimicrobial efficacy of Mentha piperata-derived biogenic zinc oxide nanoparticles against UTI-resistant pathogens

Misuse of antibiotics leads to the worldwide spread of antibiotic resistance, which motivates scientists to create new antibiotics. The recurring UTI due to antibiotics-resistant microorganism's challenges scientists globally. The biogenic nanoparticles have the potential to meet the escalating requirements of novel antimicrobial agents. The green synthesis of nanoparticles (NPs) gained more attention due to their reliable applications against resistant microbes. The current study evaluates the biogenic ZnO NPs of Mentha piperata extract against resistant pathogens of urinary tract infections by agar well diffusion assay. The biogenic ZnO NPs revealed comparatively maximum inhibition in comparison to synthetic antibiotics against two bacterial strains (Proteus mirabilis, Pseudomonas aeruginosa) and a fungal strain (Candida albicans).The synthesized biogenic ZnO NPs alone revealed maximum activities than the combination of plant extract (PE) and ZnO NPs, and PE alone. The physiochemical features of ZnO NPs characterized through UV-Vis spectroscopy, FTIR, XRD, SEM, and EDX. The UV-Vis spectroscopy revealed 281.85 nm wavelengths; the XRD pattern revealed the crystalline structure of ZnO NPs. The FTIR analysis revealed the presence of carboxylic and nitro groups, which could be attributed to plant extract. SEM analysis revealed spherical hollow symmetry due to electrostatic forces. The analysis via EDX confirmed the presence of Zn and oxygen in the sample. The physiochemical features of synthesized ZnO NPs provide pivotal information such as quality and effectiveness. The current study revealed excellent dose-dependent antimicrobial activity against the pathogenic isolates from UTI-resistant patients. The higher concentration of ZnONPs interacts with the cell membrane which triggers oxidative burst. They may bind with the enzymes and proteins and brings epigenetic alteration which leads to membrane disruption or cell death.

Biosynthesis approach of zinc oxide nanoparticles for aqueous phosphorous removal: physicochemical properties and antibacterial activities

In this study, phosphorus (PO43--P) is removed from water samples using zinc oxide nanoparticles (ZnO NPs). These nanoparticles are produced easily, quickly, and sustainably using Onion extracts (Allium cepa) at an average crystallite size of 8.13 nm using the Debye-Scherrer equation in the hexagonal wurtzite phase. The characterization and investigation of bio-synthesis ZnO NPs were carried out. With an initial concentration of 250 mg/L of P, the effects of the adsorbent dose, pH, contact time, and temperature were examined. At pH = 3 and T = 300 K, ZnO NPs achieved the optimum sorption capacity of 84 mg/g, which was superior to many other adsorbents. The isothermal study was found to fit the Langmuir model at a monolayer capacity of 89.8 mg/g, and the kinetic study was found to follow the pseudo-second-order model. The adsorption process was verified to be endothermic and spontaneous by thermodynamic characteristics. As a result of their low cost as an adsorbent and their high metal absorption, ZnO NPs were found to be the most promising sorbent in this investigation and have the potential to be used as effective sorbents for the removal of P from aqueous solutions. The antimicrobial activity results showed that ZnO NPs concentration had greater antibacterial activity than conventional Cefotaxime, which was utilized as a positive control in the inhibitory zone. However, no inhibitory zone was visible in the controlled wells that had been supplemented with onion extract and DMSO.

Synthesis of zinc oxide nanoparticles using methanol propolis extract (Pro-ZnO NPs) as antidiabetic and antioxidant

In recent times, the overall health of individuals has been declining due to unhealthy lifestyles, leading to various diseases, including diabetes. To address this issue, antidiabetic and antioxidant agents are required to back-up human well-being. Zinc oxide (ZnO) is one such substance known for its antidiabetic and antioxidant effects. To enhance its capability and effectiveness, propolis was utilized to synthesize zinc oxide nanoparticles (Pro-ZnO NPs). The objective of this study was to synthesize Pro-ZnO NPs and assess their performance by conducting inhibition assays against α-amylase and α-glucosidase enzymes, as well as a 2,2-diphenyl-1-picrylhydrazyl (DPPH) free radical scavenging assay. The results showed that Pro-ZnO NPs were formed in a hexagonal wurtzite structure, with particle sizes ranging from 30 to 50 nm and an absorption band observed at 341 nm. The stability, chemical properties, and crystallography of Pro-ZnO NPs were also thoroughly examined using appropriate methods. The Pro-ZnO NPs demonstrated significant inhibitory effects against α-amylase and α-glucosidase enzymes, with inhibition rates reaching 69.52% and 73.78%, respectively, whereas the antioxidant activity was as high as 70.76%. Consequently, with their high inhibition rates, the Pro-ZnO NPs demonstrate the potential to be employed as a natural agent for combating diabetes and promoting antioxidant effects.

Eco synthesized chitosan/zinc oxide nanocomposites as the next generation of nano-delivery for antibacterial, antioxidant, antidiabetic potential, and chronic wound repair

The present research work aimed at synthesizing chitosan-coated Zinc oxide nanocomposites (NS-CS/ZnONCs) by a bio-inspired method using an aqueous extract of Nigella sativa (NS) seeds and employing a quality-by-design approach (Box-Behnken design). The biosynthesized NS-CS/ZnONCs were physicochemically characterized and subjected to their in-vitro and in-vivo therapeutic potential. The zeta potential value of -11.2 mV and -12.6 mV indicated the stability of NS-mediated synthesized zinc oxide nanoparticles (NS-ZnONPs) and NS-CS/ZnONCs, respectively. The particle size of NS-ZnONPs and NS-CS/ZnONCs were 288.1 nm and 130.2 nm, respectively, with PDI of 0.198 and 0.158. NS-ZnONPs and NS-CS/ZnONCs showed superior radical scavenging abilities, excellent α-amylase, and α-glucosidase inhibitory activities. Also, NS-ZnONPs and NS-CS/ZnONCs demonstrated effective antibacterial activity against selected pathogens. Furthermore, NS-ZnONPs and NS-CS/ZnONCs demonstrated significant (p < 0.001) wound closure with 93.00 ± 0.43 % and 95.67 ± 0.43 % on the 15th day of treatment at the dose of 14 mg/wound, compared to 93.42 ± 0.58 % of standard. Collagen turnover was represented by hydroxyproline, which was shown to be significantly (p < 0.001) higher in the NS-ZnONPs (60.70 ± 1.44 mg/g of tissue) and NS-CS/ZnONCs (66.10 ± 1.23 mg/g of tissue) treatment groups than in the control group (47.7 ± 0.81 mg/g of tissue). Thus the NS-ZnONPs and NS-CS/ZnONCs could effectively develop promising drugs to inhibit pathogens and chronic tissue repair.

Green synthesis of Fe3O4 nanoparticles using Alliaceae waste (Allium sativum) for a sustainable landscape enhancement using support vector regression

The synthesis of metal nanoparticles using green chemistry methods has gained significant attention in the field of landscape enhancement. Researchers have paid close attention to the development of very effective green chemistry approaches for the production of metal nanoparticles (NPs). The primary goal is to create an environmentally sustainable technique for generating NPs. At the nanoscale, ferro- and ferrimagnetic minerals such as magnetite exhibit superparamagnetic properties (Fe3O4). Magnetic nanoparticles (NPs) have received increased interest in nanoscience and nanotechnology due to their physiochemical properties, small particle size (1-100 nm), and low toxicity. Biological resources such as bacteria, algae, fungus, and plants have been used to manufacture affordable, energy-efficient, non-toxic, and ecologically acceptable metallic NPs. Despite the growing demand for Fe3O4 nanoparticles in a variety of applications, typical chemical production processes can produce hazardous byproducts and trash, resulting in significant environmental implications. The purpose of this study is to look at the ability of Allium sativum, a member of the Alliaceae family recognized for its culinary and medicinal benefits, to synthesize Fe3O4 NPs. Extracts of Allium sativum seeds and cloves include reducing sugars like glucose, which may be used as decreasing factors in the production of Fe3O4 NPs to reduce the requirement for hazardous chemicals and increase sustainability. The analytic procedures were carried out utilizing machine learning as support vector regression (SVR). Furthermore, because Allium sativum is widely accessible and biocompatible, it is a safe and cost-effective material for the manufacture of Fe3O4 NPs. Using the regression indices metrics of root mean square error (RMSE) and coefficient of determination (R2), the X-ray diffraction (XRD) study revealed the lighter, smoother spherical forms of NPs in the presence of aqueous garlic extract and 70.223 nm in its absence. The antifungal activity of Fe3O4 NPs against Candida albicans was investigated using a disc diffusion technique but exhibited no impact at doses of 200, 400, and 600 ppm. This characterization of the nanoparticles helps in understanding their physical properties and provides insights into their potential applications in landscape enhancement.

Green nanotechnology advances: green manufacturing of zinc nanoparticles, characterization, and foliar application on wheat and antibacterial characteristics using Mentha spicata (mint) and Ocimum basilicum (basil) leaf extracts

Due to their distinctive characteristics and widespread application across all scientific disciplines, nanoparticles have attracted a lot of attention in the current millennium. Green synthesis of ZnO-NPs is gaining a lot of interest at the moment due to a number of its advantages over traditional methods, including being quicker, less expensive, and more environmentally friendly. In the current study, two distinct plant extracts are used to quickly, cheaply, and environmentally friendly synthesize zinc oxide nanoparticles (ZnO-NPs). Mint (Mentha spicata) and basil (Ocimum basilicum) were the plants employed in this study as stabilizing agents to synthesize ZnO-NPs with a green chemistry approach. The innovative aspect of the study is the use of mint and basil extracts in the conversion of zinc chloride to zinc oxide and then determining the effect of these two types of nanoparticles produced by green synthesis on the growth parameters of the plant when they reach the plants by foliar spraying and their uptake by plants and evaluating the antibacterial properties of these nanoparticles. The physical properties of the produced nanoparticles were investigated using XRD, SEM, and FTIR. Moreover, Escherichia coli and Staphylococcus aureus were used to demonstrate the antibacterial properties of ZnO-NPs against both gram-positive and gram-negative bacteria, respectively. Synthesized ZnO-NPs were also given as foliar treatment in order to determine Zn⁺² uptake by plants and potential toxic effects on the growth of wheat. The shape of ZnO-NPs was triangular, as revealed by SEM analysis. In the X-ray diffraction study, strong and clearly discernible sharp peaks were seen, with an average size of 24.5 nm for M-ZnO-NPs and 26.7 nm for B-ZnO-NPs determined using Scherrer's formula. The phytoconstituents of the plant extract served as capping/stabilizing agents during the synthesis of ZnO-NPs, as demonstrated by Fourier transform-infrared spectroscopy. The produced nanoparticles were applied to the green parts of wheat plants by spraying, and the development of the plants and the change of zinc uptake were investigated. At the same time, the effect of these three types of nanoparticles on the germination of wheat seeds in the soil medium containing these nanoparticles was investigated. According to experimental results, M-ZnO-NPs (produced from mint) and B-ZnO-NPs (produced from basil) improved the germination percentage of wheat at 400 mg/L concentration (100%), while raw ZnO-NPs showed 90% germination at the same concentration. When the Zn⁺² uptake of the plant by the leaves depending on the Zn⁺² concentration in the environment after spraying was examined, it was determined that the Zn⁺² uptake of the plants increased due to the increase in the applied Zn⁺² concentration. The highest Zn⁺² uptake of the plant was determined as 50, 25, and 50 mg/L for M-ZnO-NP, B-ZnO-NPs, and raw ZnO-NPs, respectively. Therefore, it has been determined that plant growth varies depending on the type and concentration of ZnO-NPs, and therefore, if foliar nanoparticle applications are made to wheat, the threshold concentrations, sizes, and types of ZnO-NPs should be carefully evaluated. In addition, antibacterial properties results showed that S. aureus was more sensitive to all three types of ZnO-NPs than E. coli.

Green Synthesis, Characterization and Bioactivity of Mangifera indica Seed-Wrapped Zinc Oxide Nanoparticles

In the realm of nanoparticles, metal-based nanoparticles have traditionally been regarded as the pioneering category. Compared to other nanoparticles, zinc oxide nanoparticles have several advantages, including optical and biological properties, which provide them a significant competitive advantage in clinical and biological applications. In the current investigation, we used an aqueous Mangifera indica seed extract to synthesize nanoparticles of zinc oxide (ZnO NPs). UV-Vis spectroscopy, Fourier transform infrared spectroscopy analysis, atomic force spectroscopy, X-ray diffraction, scanning electron microscopy, and transmission electron microscopy were used to characterize the synthesized ZnO NPs. The nanoparticles were assessed for their potential to inhibit bacterial growth and protect cells from free radical damage. According to the current study's findings, zinc oxide nanoparticles that had been modified with the aid of mango seeds were very efficient in preventing the development of the tested bacteria and were also powerful antioxidants.

Synergistic Antibacterial Proficiency of Green Bioformulated Zinc Oxide Nanoparticles with Potential Fosfomycin Synergism against Nosocomial Bacterial Pathogens

The drug resistance of bacterial pathogens causes considerable morbidity and death globally, hence there is a crucial necessity for the development of effective antibacterial medicines to address the antibacterial resistance issue. The bioprepared zinc oxide nanoparticles (ZnO-NPs) were prepared utilizing the flower extract of Hibiscus sabdariffa and then characterized using different physicochemical techniques. The antibacterial effectiveness of the bioprepared ZnO-NPs and their synergism with fosfomycin were evaluated using disk diffusion assay against the concerned pathogens. Transmission electron microscopy (TEM) investigation of the bioprepared ZnO-NPs showed that their average particle size was 18.93 ± 2.65 nm. Escherichia coli expressed the highest sensitivity to the bioinspired ZnO-NPs with a suppressive zone of 22.54 ± 1.26 nm at a concentration of 50 µg/disk, whereas the maximum synergistic effect of the bioinspired ZnO-NPs with fosfomycin was noticed against Klebsiella pneumoniae strain with synergism ratio of 100.29%. In conclusion, the bioinspired ZnO-NPs demonstrated significant antibacterial and synergistic efficacy with fosfomycin against the concerned nosocomial bacterial pathogens, highlighting the potential of using the ZnO NPs-fosfomycin combination for effective control of nosocomial infections in intensive care units (ICUs) and health care settings. Furthermore, the biogenic ZnO-NPs’ potential antibacterial action against food pathogens such as Salmonella typhimurium and E. coli indicates their potential usage in food packaging applications.

Synthesis and characterization of copper oxide nanoparticles: its influence on corn (Z. mays) and wheat (Triticum aestivum) plants by inoculation of Bacillus subtilis

Nanotechnology is now playing an emerging role in green synthesis in agriculture as nanoparticles (NPs) are used for various applications in plant growth and development. Copper is a plant micronutrient; the amount of copper oxide nanoparticles (CuONPs) in the soil determines whether it has positive or adverse effects. CuONPs can be used to grow corn and wheat plants by combining Bacillus subtilis. In this research, CuONPs were synthesized by precipitation method using different precursors such as sodium hydroxide (0.1 M) and copper nitrate (Cu(NO₃)₂) having 0.1 M concentration with a post-annealing method. The NPs were characterized through X-ray diffraction (XRD), scanning electron microscope (SEM), and ultraviolet (UV) visible spectroscopy. Bacillus subtilis is used as a potential growth promoter for microbial inoculation due to its prototrophic nature. The JAR experiment was conducted, and the growth parameter of corn (Z. mays) and wheat (Triticum aestivum) was recorded after 5 days. The lab assay evaluated the germination in JARs with and without microbial inoculation under CuONP stress at different concentrations (25 and 50 mg). The present study aimed to synthesize CuONPs and systematically investigate the particle size effects of copper (II) oxide (CuONPs) (< 50 nm) on Triticum aestivum and Z. mays. In our results, the XRD pattern of CuONPs at 500 °C calcination temperature with monoclinic phase is observed, with XRD peak intensity slightly increasing. The XRD patterns showed that the prepared CuONPs were extremely natural, crystal-like, and nano-shaped. We used Scherrer's formula to calculate the average size of the particle, indicated as 23 nm. The X-ray diffraction spectrum of synthesized materials and SEM analysis show that the particles of CuONPs were spherical in nature. The results revealed that the synthesized CuONPs combined with Bacillus subtilis used in a field study provided an excellent result, where growth parameters of Z. Mays and Triticum aestivum such as root length, shoot length, and plant biomass was improved as compared to the control group.

Trichoderma-Mediated ZnO Nanoparticles and Their Antibiofilm and Antibacterial Activities

Antimicrobial resistance is a major global health concern and one of the gravest challenges to humanity today. Antibiotic resistance has been acquired by certain bacterial strains. As a result, new antibacterial drugs are urgently required to combat resistant microorganisms. Species of Trichoderma are known to produce a wide range of enzymes and secondary metabolites that can be exploited for the synthesis of nanoparticles. In the present study, Trichoderma asperellum was isolated from rhizosphere soil and used for the biosynthesis of ZnO NPs. To examine the antibacterial activity of ZnO NPs against human pathogens, Escherichia coli and Staphylococcus aureus were used. The obtained antibacterial results show that the biosynthesized ZnO NPs were efficient antibacterial agents against the pathogens E. coli and S. aureus, with an inhibition zone of 3-9 mm. The ZnO NPs were also effective in the prevention of S. aureus biofilm formation and adherence. The current work shows that the MIC dosages of ZnO NPs (25, 50, and 75 μg/mL) have effective antibacterial activity and antibiofilm action against S. aureus. As a result, ZnO NPs can be used as a part of combination therapy for drug-resistant S. aureus infections, where biofilm development is critical for disease progression.

Evaluation of Activity of Zinc Oxide Nanoparticles on Human Rotavirus and Multi-Drug Resistant Acinetobacter Baumannii

BACKGROUND

Rotaviruses are the cause of acute gastroenteritis and severe diarrheal diseases in children worldwide. Children under the age of five are more susceptible to rotavirus infections. Due to such as the lack of effective drugs and supportive therapy only, the development of new antiviral agents against rotaviruses is required. Multi-drug-resistant Acinetobacter baumannii is also one of the most challenging Gram-negative bacteria to control and treat due to its antibiotic resistance, particularly in intensive care units.

OBJECTIVE

This study aimed to investigate the activity of zinc oxide nanoparticles against human rotavirus and multi-drug resistant Acinetobacter baumannii.

METHODS

The standard 50% tissue culture infectious dose method and the real-time polymerase chain reaction assay were used to investigate the effects of zinc oxide nanoparticles on rotaviruses. The well diffusion and the minimum inhibitory concentration method were used to assess the antibacterial activity of zinc oxide nanoparticles against Acinetobacter baumannii.

RESULTS

300 μg/ml of zinc oxide nanoparticles demonstrated the highest anti-rotavirus effects, resulting in a 3.16 logarithmic decrease in virus infectious titer, and a four-unit increase in the cycle threshold value of the real-time polymerase chain reaction assay compared to the untreated control (P value <0.001 and P value = 0.005, respectively). The diameter of the inhibition zone of zinc oxide nanoparticles solution against Acinetobacter baumannii was 17 mm. The minimum inhibitory concentration results of the zinc oxide nanoparticles solution against Acinetobacter baumannii was 1.56 mg/ml.

CONCLUSION

Our findings showed that zinc oxide nanoparticles could be considered a promising antimicrobial compound.

Casting Zinc Oxide Nanoparticles Using Fagonia Blend Microbial Arrest

Physical and chemical methods for production of nanoparticles (NPs) are not only harmful for environment but also toxic for living organism. The present study attempts to synthesize ZnO NPs using the natural plant extract of Fagonia cretica. The phytochemical screening of F. cretica water extract was performed to check the presence of biologically active compounds like alkaloids, tannins, carbohydrates, proteins, phenols, saponins, flavonoids, and steroids. Well-prepared ZnO NPs given sharp absorption peak at 362 were confirmed by UV-visible. XRD analysis showed the ZnO NPs having wurtzite hexagonal structure with crystalline form. TEM analysis endorses flower-shaped ZnO nanoparticles ~ 100-1000 nm. FTIR spectrum suggested the involvement of phenolic groups and amino acids and amide linkages in protein performs as the stabilizing agent in the synthesis of ZnO NPs. The ZnO NPs showed strong antibacterial behavior against two bacterial strains Gram-positive bacteria Staphylococcus aureus and Gram-negative bacteria Escherichia coli. In addition, ZnO NPs exhibited strong antioxidant activity of 79%:85.6%:89.9% at 5 μg/mL:10 μg/mL:5 μg/mL concentration of ZnO NPs respectively. This work indicates that Fagonia is considered to be appropriate and promising candidate for extending the innovative applications in the field of medicine and industry and also helpful and useful to the scientific communities.

Pomegranate Peel Extract-Mediated Green Synthesis of ZnO-NPs: Extract Concentration-Dependent Structure, Optical, and Antibacterial Activity

Plant-based nanoparticles (NPs) have many advantages over physical and chemical methods and featured with several medicinal and biological applications. In this study, zinc oxide NPs (ZnO-NPs) were synthesized using pomegranate peel aqueous extract, under mild and ecofriendly conditions. The ZnO-NPs structure, morphology, and optical properties were investigated using X-ray diffraction (XRD), scanning electron microscope (SEM), Fourier transform infrared (FTIR), and ultraviolet-visible (UV-Vis). Antibacterial activity against Gram-positive and Gram-negative strains were evaluated using the disk diffusion method. The effect of extract concentration (20, 30, and 40 mL) on the final properties of NPs, as well as the NPs concentration used for antibacterial test (50, 100, and 200 mg/mL), were also studied. The results indicate a hexagonal structure with particle size increases as extract concentration increase (D  = 18.53, 29.88, and 30.34 nm), while the optical bandgap was decreased (Eg = 2.87, 2.80, and 1.92 eV). The antibacterial activity of ZnO-NPs indicated high efficiency, similar or even higher than that of the control azithromycin, more against S. aureus, increased with NPs concentration, and preferred when NPs prepared from high extract concentration. Such promising physicochemical properties support the usefulness and efficacy of the reported bio-route for production of ZnO-NPs and may encourage its application for large-scale production.

Current Research on Zinc Oxide Nanoparticles: Synthesis, Characterization, and Biomedical Applications

Zinc oxide nanoparticles (ZnO-NPs) have piqued the curiosity of researchers all over the world due to their extensive biological activity. They are less toxic and biodegradable with the capacity to greatly boost pharmacophore bioactivity. ZnO-NPs are the most extensively used metal oxide nanoparticles in electronic and optoelectronics because of their distinctive optical and chemical properties which can be readily modified by altering the morphology and the wide bandgap. The biosynthesis of nanoparticles using extracts of therapeutic plants, fungi, bacteria, algae, etc., improves their stability and biocompatibility in many biological settings, and its biofabrication alters its physiochemical behavior, contributing to biological potency. As such, ZnO-NPs can be used as an effective nanocarrier for conventional drugs due to their cost-effectiveness and benefits of being biodegradable and biocompatible. This article covers a comprehensive review of different synthesis approaches of ZnO-NPs including physical, chemical, biochemical, and green synthesis techniques, and also emphasizes their biopotency through antibacterial, antifungal, anticancer, anti-inflammatory, antidiabetic, antioxidant, antiviral, wound healing, and cardioprotective activity. Green synthesis from plants, bacteria, and fungus is given special attention, with a particular emphasis on extraction techniques, precursors used for the synthesis and reaction conditions, characterization techniques, and surface morphology of the particles.

Photocatalytic Activity Induced by Metal Nanoparticles Synthesized by Sustainable Approaches: A Comprehensive Review

Nanotechnology is a fast-expanding area with a wide range of applications in science, engineering, health, pharmacy, and other fields. Among many techniques that are employed toward the production of nanoparticles, synthesis using green technologies is the simplest and environment friendly. Nanoparticles produced from plant extracts have become a very popular subject of study in recent decades due to their diverse advantages such as low-cost synthesis, product stability, and ecofriendly protocols. These merits have prompted the development of nanoparticles from a variety of sources, including bacteria, fungi, algae, proteins, enzymes, etc., allowing for large-scale production with minimal contamination. However, nanoparticles obtained from plant extracts and phytochemicals exhibit greater reduction and stabilization and hence have proven the diversity of properties, like catalyst/photocatalyst, magnetic, antibacterial, cytotoxicity, circulating tumor deoxy ribo nucleic acid (CT-DNA) binding, gas sensing, etc. In the current scenario, nanoparticles can also play a critical role in cleaning wastewater and making it viable for a variety of operations. Nano-sized photocatalysts have a great scope toward the removal of large pollutants like organic dyes, heavy metals, and pesticides in an eco-friendly and sustainable manner from industrial effluents. Thus, in this review article, we discuss the synthesis of several metal nanoparticles using diverse plant extracts, as well as their characterization via techniques like UV–vis (ultraviolet–visible), XRD (X-ray diffraction), SEM (scanning electron microscopy), TEM (transmission electron microscopy), FTIR (Fourier transform infrared spectroscopy), etc., and catalytic activity on various hazardous systems.

ZnO Nano-swirlings for Azo Dye AR183 photocatalytic degradation and antimycotic activity

The sol-gel technique was used to fabricate ZnO Nano-swirlings (ZNsw) at a predetermined agitation rate (of >> 1900 rpm), with around 21.94 gm of zinc acetate dihydrate and 0.2 g cetyltrimethylammoniumbromide (CTAB) and a cationic surfactant (drop-wise). The impact of the predetermined agitation condition on the molecular size and morphology of ZNsw is examined, and the outcomes are dissected by useful characterization tools and techniques viz. XRD, SEM embedded with EDS, TEM, FT-IR and UV-visible. The SEM and TEM results suggest that the product formed into a big cluster of adequate ZNsw, containing a significant quantity of folded long thread-lengths. Each group indicated a fair amount of the volume of these lengths. The photocatalytic process of ZNsw was carried out as a result of the irradiation time due to the deterioration of Azo Dye AR183, resulting in approximately 79 percent dye discoloration following an 80-min UV light irradiation in the presence of ZNsw. Additionally, the synthesized ZNsw was tested for antagonistic activity, and the growth hindrance of two plant pathogenic fungal strains found. Per cent inhibition in growth of Rhizoctonia solani and Alternaria alternata were observed in response to ZNsw.

Pesticide pollutants in the environment - A critical review on remediation techniques, mechanism and toxicological impact

The excessive and unorganised utilisation of pesticides have posed negative impacts on soil and water at higher levels. Pesticides are a major class of persistent organic compounds with high resistance to natural biodegradation and enhanced tendency to bio accumulate. The severe health hazards imposed on the living organisms hinder the ecosystem and lead to chronic and irreversible health issues. Photocatalytic method is reported as a potential alternative with a variety of techniques and materials that are safer, easier, durable, cost-effective and efficient. Nanomaterials play a key role in this domain due to their versatility. In particular, nanostructured materials of organized shapes and morphological properties have gained enormous attention in research and real-time applications. Specifically, nanomaterials like nanotubes, nanorods and nanowires have unique properties and anisotropic structure that make them more suitable for treating pesticide wastes with photocatalysis. Variety of tuning methods and materials are emerging to enhance the activity of titanium and zinc based nanocatalysts in remediation methods. In the present article, four pesticides, namely, atrazine, chlorpyrifos, paraquat and naphthalene are chosen due to their common occurrence and usage in agricultural applications. These pesticides are highly toxic and need special attention to explore appropriate remediation methods. The report also details the latest innovations reported by several research studies in exploring the potential of specially synthesised nanoparticles for photocatalytic removal of pesticide pollutants from environment. For zinc-based hybrid nanomaterials, the maximum disintegration reported were 99%, 98%, 73.3% and 92.3% for atrazine, chlorpyrifos, paraquat and naphthalene, respectively.

Green Synthesis of Metal Oxides Semiconductors for Gas Sensing Applications

During recent decades, metal oxide semiconductors (MOS) have sparked more attention in various applications and industries due to their excellent sensing characteristics, thermal stability, abundance, and ease of synthesis. They are reliable and accurate for measuring and monitoring environmentally important toxic gases, such as NO₂, NO, N₂O, H₂S, CO, NH₃, CH₄, SO₂, and CO₂. Compared to other sensing technologies, MOS sensors are lightweight, relatively inexpensive, robust, and have high material sensitivity with fast response times. Green nanotechnology is a developing branch of nanotechnology and aims to decrease the negative effects of the production and application of nanomaterials. For this purpose, organic solvents and chemical reagents are not used to prepare metal nanoparticles. On the contrary, the synthesis of metal or metal oxide nanoparticles is done by microorganisms, either from plant extracts or fungi, yeast, algae, and bacteria. Thus, this review aims at illustrating the possible green synthesis of different metal oxides such as ZnO, TiO₂, CeO₂, SnO₂, In₂O₃, CuO, NiO, WO_3, and Fe₃O₄, as well as metallic nanoparticles doping.

Photocatalytic degradation activity of goji berry extract synthesized silver-loaded mesoporous zinc oxide (Ag@ZnO) nanocomposites under simulated solar light irradiation

Different approaches have been developed for the synthesis of various nanostructured materials with unique morphologies. This study demonstrated the photocatalytic and antimicrobial abilities of silver-loaded zinc oxide nanocomposites (Ag@ZnO NCs). Initially, ZnO with a unique mesoporous ellipsoidal morphology in the size range of 0.59 ± 0.11 × 0.33 ± 0.09 µm (length × width) was synthesized using aqueous precipitation in a mild hydrothermal condition (80 °C) with the aqueous fruit extract of goji berry (GB) (as an additive) and calcined in air at 200 °C/2 h and 250 °C/3 h. Powder X-ray diffraction (XRD) revealed the formation of a hexagonal phase of the wurtzite (WZ) structure. The average crystallite size of ZnO was 23.74 ± 4.9 nm as calculated using Debye-Scherrer's equation. It also possesses higher thermal stability with the surface area, pore volume, and pore size of 11.77 m2/g, 0.027 cm3/g, and 9.52 nm, respectively. Furthermore, different mesoporous Ag@ZnO NCs loaded with face-centered cubic (fcc) silver nanoparticles (Ag NPs) in the range of 90-160 nm were synthesized by GB extract as a reducing and capping agent on the surface of ZnO after calcination in air. The immobilization of Ag NPs was confirmed by XRD, X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), FE-transmission electron microscopy (FE-TEM), and energy-dispersive X-ray spectroscopy (EDS). It was found that Ag0.2@ZnO NC (0.2 wt% of Ag) showed excellent photocatalytic degradation of both methylene blue (MB) (cationic) and congo red (CR) (anionic) dyes under simulated solar irradiation. The photocatalytic degradation of 99.3 ± 0.35% MB and 98.5 ± 1.3% CR occurred in 90 and 55 min, respectively, at room temperature by Ag0.2@ZnO NC. Besides, these NCs also showed broad-spectrum antibacterial activity against both Gram-positive and Gram-negative bacteria. The mechanistic concept of generating reactive oxygen species (ROS) by electron and hole charge (e‾/h+) carriers seems to be responsible for the photocatalytic degradation of commercial dyes and antibacterial activities by Ag@ZnO NCs. Thus, these silver-loaded mesoporous ellipsoidal ZnO NCs are promising candidates as photocatalysts for industrial/wastewater treatment as well as in antimicrobial therapeutics.

Acaricidal Efficacy of Biosynthesized Zinc Oxide Nanoparticles Against Hyalomma dromedarii (Acari: Ixodidae) and Their Toxic Effects on Swiss Albino Mice

Purpose

The current study aimed to investigate the efficacy of zinc oxide nanoparticles (ZnO NPs) synthesized by Melia azedarach aqueous extract to control Hyalomma dromedarii tick, and to evaluate their toxic effects on Swiss albino mice.

Methods

ZnO NPs were synthesized using M. azedarach aqueous extract. UV–visible spectroscopy, Fourier transform infrared spectroscopy, scanning electron microscopy, and energy-dispersive spectroscopy were used to characterize the synthesized NPs. Egg, nymph, larva, and adult immersion tests were used for bioassay of tick stages with the synthesized ZnO NP. A toxicity study was performed on Swiss albino mice after treatment with 1/10 of the oral LD₅₀ of ZnO NPs (8437 mg/kg) for 5 successive days by oral gavage.

Results

The LC₅₀ of ZnO NPs on the eggs, larvae, and nymphs was 11.6, 8.03, and 3.9 mg/ml, respectively. The reproductive performance of females treated with ZnO NPs was lower than that of untreated females. The hematological results showed an insignificant increase in the level of white blood cells with normal red blood cells, hemoglobin, in addition to normal platelet count. The biochemical analysis showed an insignificant increased level (P > 0.05) of alkaline phosphatase and alanine aminotransferase. The liver and kidney suffered few histopathological changes after oral administration of ZnO NPs.

Conclusion

These results suggest that ZnO NPs have good acaricidal activity against eggs, larvae, and engorged nymphs of H. dromedarii. ZnO NPs minimized the number of eggs laid by engorged females and the hatchability of their eggs. ZnO NPs did not affect unfed adults. The toxicity results of the mice revealed insignificant changes in the hemogram, biochemistry, with liver and kidney suffering few histopathological changes. Future studies are needed to assess application routes (topical vs oral). Based on these findings, ZnO NPs may be incorporated in the control of camel tick H. dromedarii.

Synthesis and Characterization of Zinc Oxide Nanoparticles of Solanum nigrum and Its Anticancer Activity via the Induction of Apoptosis in Cervical Cancer

Effective cancer therapy can be achieved by using nano-drug delivery systems which provide a targeted drug delivery strategy by overcoming the drawbacks of conventional treatments like chemotherapy and radiation. ZnO nanoparticles are a potent anticancer agent that causes tumor cell destruction with the targeted drug delivery. In this present study, green synthesis of ZnO nanoparticles has been done using the plant Solanum nigrum. The synthesized ZnO nanoparticles were studied by the characterization techniques like UV-visible spectroscopy, SEM, TEM, DLS, zeta potential, FTIR, and XRD. The synthesized ZnO nanoparticles of Solanum nigrum exhibited a significant anticancer activity against HeLa cell lines through the apoptotic pathway. The cytotoxicity of ZnO nanoparticles was assessed using MTT assay, wound healing assay, DAPI staining, and acridine orange and ethidium bromide double staining. The expression patterns of β-catenin, p53, caspase-3, and caspase-9 were analyzed using reverse transcriptase-PCR. The results obtained from the study indicate that the ZnO nanoparticles of Solanum nigrum possess a dose-dependent cytotoxic effect against HeLa cell lines through the inhibition of β-catenin and increasing the levels of p53, caspase-3, and caspase-9.

Recent and Emerging Trends in Remediation of Methylene Blue Dye from Wastewater by Using Zinc Oxide Nanoparticles

Due to the increased demand for clothes by the growing population, the dye-based sectors have seen fast growth in the recent decade. Among all the dyes, methylene blue dye is the most commonly used in textiles, resulting in dye effluent contamination. It is carcinogenic, which raises the stakes for the environment. The numerous sources of methylene blue dye and their effective treatment procedures are addressed in the current review. Even among nanoparticles, photocatalytic materials, such as TiO2, ZnO, and Fe3O4, have shown greater potential for photocatalytic methylene blue degradation. Such nano-sized metal oxides are the most ideal materials for the removal of water pollutants, as these materials are related to the qualities of flexibility, simplicity, efficiency, versatility, and high surface reactivity. The use of nanoparticles generated from waste materials to remediate methylene blue is highlighted in the present review.

Effect of green synthesized ZnO nanoparticles using Paspalum scrobiculatum grains extract in biological applications

In this report, ZnO nanoparticles were biosynthesized using Paspalum scrobiculatum grains extract for the first time. GC-MS analysis explicated that diethyl phthalate was the major phytocompound with 94.09% in aqueous extract. ZnO nanoparticles formation was confirmed by various physicochemical analyses. HR-TEM images showed the hexagonal, rectangular shaped nanoparticles in 15-30 nm size. The antioxidant, anti-inflammatory, and anti-diabetic analyses showed the effective bioactivity of ZnO nanoparticles in 80 μg/ml concentration with 95.36%, 94.08%, and 91.96%, respectively. The morphological and tissue changes witnessed in larvicidal and insecticidal activities against Culex tritaeniorhynchus and Tribolium castaneum revealed the efficient nature of ZnO nanoparticles in 100 ppm at 48 h and 100 μg/kg at 72 h, respectively. The morphological changes in antibacterial activity demonstrated the bactericidal nature of ZnO nanoparticles against Salmonella typhi and Staphylococcus aureus in 150 μg/ml concentration. The morphological observations in anticancer activity against HepG2 liver cancer cells showed the potent drug features of ZnO nanoparticles in 100 μg/ml concentration with 97.18% of cytotoxicity. The ZnO nanoparticles showed no toxicity against HDF normal cells in lower concentrations and it explicated the biocompatible features of nanoparticles. The Vigna radiata plant growth was efficiently promoted by low (60 ppm) concentration of nanoparticles. The ZnO nanoparticles divulged effective degradation of IPA, EDTA, BQ, and DPBF in 75%, 45%, 55%, and 80% through ROS formation, respectively. Thus, the synthesized ZnO nanoparticles are biocompatible and inexpensive material compared to the traditional one and can be utilized as an efficient material in biological fields.