Oral tissue engineering progress and challenges

Chitosan nanocomposite for tissue engineering and regenerative medicine: A review

Regenerative medicine and tissue engineering have emerged as a multidisciplinary promising field in the quest to address the limitations of traditional medical approaches. One of the key aspects of these fields is the development of such types of biomaterials that can mimic the extracellular matrix and provide a conducive environment for tissue regeneration. In this regard, chitosan has played a vital role which is a naturally derived linear bi-poly-aminosaccharide, and has gained significant attention due to its biocompatibility and unique properties. Chitosan possesses many unique physicochemical properties, making it a significant polysaccharide for different applications such as agriculture, nutraceutical, biomedical, food, nutraceutical, packaging, etc. as well as significant material for developing next-generation hydrogel and bio-scaffolds for regenerative medicinal applications. Moreover, chitosan can be easily modified to incorporate desirable properties, such as improved mechanical strength, enhanced biodegradability, and controlled release of bioactive molecules. Blending chitosan with other polymers or incorporating nanoparticles into its matrix further expands its potential in tissue engineering applications. This review summarizes the most recent studies of the last 10 years based on chitosan, blends, and nanocomposites and their application in bone tissue engineering, hard tissue engineering, dental implants, dental tissue engineering, dental fillers, and cartilage tissue engineering.

Mechanical properties, and in vitro biocompatibility assessment of biomimetic dual layered keratin/ hydroxyapatite scaffolds

A novel biomimetic dual layered keratin/hydroxyapatite (keratin/HA) scaffold was designed using iterative freeze-drying technique. The prepared scaffolds were studied using several analytical techniques to better understand the biological, structural, and mechanical properties. The developed multilayered, interconnected, porous keratin scaffold with different hydroxyapatite (HA) content in the outer and inner layer, mimics the inherent gradient structure of alveolar bone. SEM studies showed an interconnected porous architecture of the prepared scaffolds with seamless integration between the upper and lower layers. The incorporation of HA improved the mechanical properties keratin/HA scaffolds. The keratin/HA scaffolds exhibited superior mechanical properties in terms of Young's modulus and compressive strength in comparison to pure keratin scaffolds. The biocompatibility studies suggested that both keratin and keratin/HA scaffolds were cyto-compatible, in terms of cell proliferation. Furthermore, it showed that both the tested materials can served as an ideal substrate for the differentiation of Saos-2 cells, leading to mineralization of the extracellular matrix. In summary, ionic liquid based green technique was employed for keratin extraction to fabricate keratin/HA scaffolds and our detailed in vitro investigations suggest the great potential for these composite scaffolds for bone tissue engineering in future.

A microfluidic organ-on-a-chip: into the next decade of bone tissue engineering applied in dentistry

A comprehensive understanding of the complex physiological and pathological processes associated with alveolar bones, their responses to different therapeutics strategies, and cell interactions with biomaterial becomes necessary in precisely treating patients with severe progressive periodontitis, as a bone-related issue in dentistry. However, existing monolayer cell culture or pre-clinical models have been unable to mimic the complex physiological, pathological and regeneration processes in the bone microenvironment in response to different therapeutic strategies. In this point, 'organ-on-a-chip' (OOAC) technology, specifically 'alveolar-bone-on-a-chip', is expected to resolve the problems by better imitating infection site microenvironment and microphysiology within the oral tissues. The OOAC technology is assessed in this study toward better approaches in disease modeling and better therapeutics strategy for bone tissue engineering applied in dentistry.

Implications of Gene Therapy in Dentistry and Periodontics: A Narrative Review

The relentless march of technological progress entails constant evolution and adaptation. A concerted effort is underway in medical research to unravel various diseases' cellular and molecular underpinnings. The traditional approaches to disease treatment often fall short of delivering entirely satisfactory outcomes, which has prompted a shifting spotlight on gene therapy as a versatile solution for many inherited and acquired disorders. Genes, intricate sequences of genetic code, are the complicated blueprints dictating the production of essential proteins within the human body. Remarkably, each individual's genetic makeup is uniquely distinct, with variations in these genetic sequences serving as the bedrock of our diversity. Gene therapy represents an innovative medical strategy that harnesses the power of genes themselves to function as therapeutic agents. It serves as a conduit through which defective genes are either substituted or mended with the introduction of remedial genetic material. This groundbreaking method can tackle various illnesses, from conditions originating from single-gene abnormalities to intricate disorders influenced by multiple genes. In dentistry and periodontics, gene therapy finds a promising array of applications. It contributes significantly to managing salivary gland disorders, autoimmune diseases, and the regeneration of damaged bone tissue, as well as addressing cancerous and precancerous conditions. Moreover, the possibilities extend into DNA vaccination and broader areas of oral health. The advent of gene therapy in dentistry represents a new era of significant progress, offering substantial advancements in the management of periodontal disease and the reconstruction of the dental alveolar apparatus. The aim of this narrative review is to provide a comprehensive overview of the landscape of gene therapy investigations in these disciplines, shedding light on its potential implications for oral health and treatment. With its potential to rectify the genetic underpinnings of various conditions, gene therapy offers a novel frontier in healthcare that continually shapes the landscape of medicine and holds the promise of more effective and personalised treatments.

Research Progress on Nanomaterials for Tissue Engineering in Oral Diseases

Due to their superior antibacterial properties, biocompatibility and high conductivity, nanomaterials have shown a broad prospect in the biomedical field and have been widely used in the prevention and treatment of oral diseases. Also due to their small particle sizes and biodegradability, nanomaterials can provide solutions for tissue engineering, especially for oral tissue rehabilitation and regeneration. At present, research on nanomaterials in the field of dentistry focuses on the biological effects of various types of nanomaterials on different oral diseases and tissue engineering applications. In the current review, we have summarized the biological effects of nanoparticles on oral diseases, their potential action mechanisms and influencing factors. We have focused on the opportunities and challenges to various nanomaterial therapy strategies, with specific emphasis on overcoming the challenges through the development of biocompatible and smart nanomaterials. This review will provide references for potential clinical applications of novel nanomaterials in the field of oral medicine for the prevention, diagnosis and treatment of oral diseases.

Applications of Gene Therapy in Dentistry: A Review Article

Gene therapy promises to possess a good prospect in bridging the gap between dental applications and medicine. The dynamic therapeutic modalities of gene therapy have been advancing rapidly. Conventional approaches are being revamped to be more comprehensive and pre-emptive, which could do away with the need for surgery and medicine altogether. The complementary base sequences known as genes convey the instructions required to manufacture proteins. The oral cavity is one of the most accessible locations for the therapeutic intervention of gene therapy for several oral tissues. In 1990, the first significant trial of gene therapy was overseen to alleviate adenosine deaminase deficiency. The notion of genetic engineering has become increasingly appealing as a reflection of its benefits over conventional treatment modalities. An example of how this technology may alter dentistry is the implementation of gene therapy for dental and oral ailments. The objective of this article is to examine the effects of gene therapy on the field of dentistry, periodontology and implantology. Furthermore, the therapeutic factors of disease therapy, minimal invasion, and appropriate outcome have indeed been taken into consideration.

The 3D-Printed Ordered Bredigite Scaffold Promotes Pro-Healing of Critical-Sized Bone Defects by Regulating Macrophage Polarization

Background

Repairing critical-sized bone defects secondary to traumatic or tumorous damage is a complex conundrum in clinical practice; in this case, artificial scaffolds exhibited preferable outcomes. Bredigite (BRT, Ca₇MgSi₄O₁₆) bioceramic possesses excellent physicochemical properties and biological activity as a promising candidate for bone tissue engineering.

Methods

Structurally ordered BRT (BRT-O) scaffolds were fabricated by a three-dimensional (3D) printing technique, and the random BRT (BRT-R) scaffolds and clinically available β-tricalcium phosphate (β-TCP) scaffolds were compared as control groups. Their physicochemical properties were characterized, and RAW 264.7 cells, bone marrow mesenchymal stem cells (BMSCs), and rat cranial critical-sized bone defect models were utilized for evaluating macrophage polarization and bone regeneration.

Results

The BRT-O scaffolds exhibited regular morphology and homogeneous porosity. In addition, the BRT-O scaffolds released higher concentrations of ionic products based on coordinated biodegradability than the β-TCP scaffolds. In vitro, the BRT-O scaffolds facilitated RWA264.7 cells polarization to pro-healing M2 macrophage phenotype, whereas the BRT-R and β-TCP scaffolds stimulated more pro-inflammatory M1-type macrophages. A conditioned medium derived from macrophages seeding on the BRT-O scaffolds notably promoted the osteogenic lineage differentiation of BMSCs in vitro. The cell migration ability of BMSCs was significantly enhanced under the BRT-O-induced immune microenvironment. Moreover, in rat cranial critical-sized bone defect models, the BRT-O scaffolds group promoted new bone formation with a higher proportion of M2-type macrophage infiltration and expression of osteogenesis-related markers. Therefore, in vivo, BRT-O scaffolds play immunomodulatory roles in promoting critical-sized bone defects by enhancing the polarization of M2 macrophages.

Conclusion

3D-printed BRT-O scaffolds can be a promising option for bone tissue engineering, at least partly through macrophage polarization and osteoimmunomodulation.

Biomimetic Approaches in Clinical Endodontics

In the last few decades, biomimetic concepts have been widely adopted in various biomedical fields, including clinical dentistry. Endodontics is an important sub-branch of dentistry which deals with the different conditions of pulp to prevent tooth loss. Traditionally, common procedures, namely pulp capping, root canal treatment, apexification, and apexigonesis, have been considered for the treatment of different pulp conditions using selected materials. However, clinically to regenerate dental pulp, tissue engineering has been advocated as a feasible approach. Currently, new trends are emerging in terms of regenerative endodontics which have led to the replacement of diseased and non-vital teeth into the functional and healthy dentine-pulp complex. Root- canal therapy is the standard management option when dental pulp is damaged irreversibly. This treatment modality involves soft-tissue removal and then filling that gap through the obturation technique with a synthetic material. The formation of tubular dentine and pulp-like tissue formation occurs when stem cells are transplanted into the root canal with an appropriate scaffold material. To sum up tissue engineering approach includes three components: (1) scaffold, (2) differentiation, growth, and factors, and (3) the recruitment of stem cells within the pulp or from the periapical region. The aim of this paper is to thoroughly review and discuss various pulp-regenerative approaches and materials used in regenerative endodontics which may highlight the current trends and future research prospects in this particular area.

In Vitro and In Vivo Cell-Interactions with Electrospun Poly (Lactic-Co-Glycolic Acid) (PLGA): Morphological and Immune Response Analysis

Random electrospun three-dimensional fiber membranes mimic the extracellular matrix and the interfibrillar spaces promotes the flow of nutrients for cells. Electrospun PLGA membranes were analyzed in vitro and in vivo after being sterilized with gamma radiation and bioactivated with fibronectin or collagen. Madin-Darby Canine Kidney (MDCK) epithelial cells and primary fibroblast-like cells from hamster’s cheek paunch proliferated over time on these membranes, evidencing their good biocompatibility. Cell-free irradiated PLGA membranes implanted on the back of hamsters resulted in a chronic granulomatous inflammatory response, observed after 7, 15, 30 and 90 days. Morphological analysis of implanted PLGA using light microscopy revealed epithelioid cells, Langhans type of multinucleate giant cells (LCs) and multinucleated giant cells (MNGCs) with internalized biomaterial. Lymphocytes increased along time due to undegraded polymer fragments, inducing the accumulation of cells of the phagocytic lineage, and decreased after 90 days post implantation. Myeloperoxidase⁺ cells increased after 15 days and decreased after 90 days. LCs, MNGCs and capillaries decreased after 90 days. Analysis of implanted PLGA after 7, 15, 30 and 90 days using transmission electron microscope (TEM) showed cells exhibiting internalized PLGA fragments and filopodia surrounding PLGA fragments. Over time, TEM analysis showed less PLGA fragments surrounded by cells without fibrous tissue formation. Accordingly, MNGC constituted a granulomatous reaction around the polymer, which resolves with time, probably preventing a fibrous capsule formation. Finally, this study confirms the biocompatibility of electrospun PLGA membranes and their potential to accelerate the healing process of oral ulcerations in hamsters’ model in association with autologous cells.

Hijama (wet cupping therapy) enhances oral and dental health by improving salivary secretion volume and pH in adult patients at King Abdul Aziz University Hospital (KAUH), Jeddah, KSA: A controlled trial study

Objective

The aim of this study was to explore the potential effect of Hijama in promoting oral health by analyzing its effects in modulating saliva flow and pH.

Method

An open-label, non-randomized controlled trial design was conducted at the Hijama clinic of Y.A. Jameel Scientific Chair of Prophetic Medical Applications at King Abdul Aziz University Hospital (KAUH), Jeddah, KSA. Forty-one healthy volunteers were divided into two groups: Hijama (intervention, N = 21) and control (N = 20). Saliva volume and pH were measured in salivary samples collected in a standardized fashion, 1 h before admission to the Hijama room (pre-Hijama) and 30 min after the procedure (post-Hijama) in both groups. The Hijama group underwent an additional salivary collection 7 days after Hijama.

Result

Early post-Hijama assessment showed an increase in saliva volume by an average of 1 mL in the Hijama group, whereas that in the control group decreased by 0.6 mL (p < 0.001; large effect size, Cohen's d = 1.24). Saliva pH also increased in the Hijama group by an average 0.22 but decreased by 0.08 in controls (p < 0.001; large effect size, Cohen's d = 1.22). The multivariate model demonstrated that Hijama explained 48.8% of the variability of both pH and volume together (group × time effect, eta squared = 0.488, p < 0.001), whereas time and sex had no effect. At 7 days post-Hijama, both the volume and pH of saliva had increased in the Hijama group with respect to the early post-Hijama time point; however, only the volume increase was statistically significant.

Conclusion

Hijama enhanced salivary function and induced a significant increase in saliva volume and pH, which was maintained 7 days after the intervention. Further studies are warranted to identify other effects of Hijama on salivary glands and explore its long-term efficacy and clinical applications.

Locally Applied Repositioned Hormones for Oral Bone and Periodontal Tissue Engineering: A Narrative Review

Bone and periodontium are tissues that have a unique capacity to repair from harm. However, replacing or regrowing missing tissues is not always effective, and it becomes more difficult as the defect grows larger. Because of aging and the increased prevalence of debilitating disorders such as diabetes, there is a considerable increase in demand for orthopedic and periodontal surgical operations, and successful techniques for tissue regeneration are still required. Even with significant limitations, such as quantity and the need for a donor area, autogenous bone grafts remain the best solution. Topical administration methods integrate osteoconductive biomaterial and osteoinductive chemicals as hormones as alternative options. This is a promising method for removing the need for autogenous bone transplantation. Furthermore, despite enormous investigation, there is currently no single approach that can reproduce all the physiologic activities of autogenous bone transplants. The localized bioengineering technique uses biomaterials to administer different hormones to capitalize on the host’s regeneration capacity and capability, as well as resemble intrinsic therapy. The current study adds to the comprehension of the principle of hormone redirection and its local administration in both bone and periodontal tissue engineering.

Bone morphogenetic protein 7 mediates stem cells migration and angiogenesis: therapeutic potential for endogenous pulp regeneration

Pulp loss is accompanied by the functional impairment of defense, sensory, and nutrition supply. The approach based on endogenous stem cells is a potential strategy for pulp regeneration. However, endogenous stem cell sources, exogenous regenerative signals, and neovascularization are major difficulties for pulp regeneration based on endogenous stem cells. Therefore, the purpose of our research is to seek an effective cytokines delivery strategy and bioactive materials to reestablish an ideal regenerative microenvironment for pulp regeneration. In in vitro study, we investigated the effects of Wnt3a, transforming growth factor-beta 1, and bone morphogenetic protein 7 (BMP7) on human dental pulp stem cells (h-DPSCs) and human umbilical vein endothelial cells. 2D and 3D culture systems based on collagen gel, matrigel, and gelatin methacryloyl were fabricated to evaluate the morphology and viability of h-DPSCs. In in vivo study, an ectopic nude mouse model and an in situ beagle dog model were established to investigate the possibility of pulp regeneration by implanting collagen gel loading BMP7. We concluded that BMP7 promoted the migration and odontogenic differentiation of h-DPSCs and vessel formation. Collagen gel maintained the cell adhesion, cell spreading, and cell viability of h-DPSCs in 2D or 3D culture. The transplantation of collagen gel loading BMP7 induced vascularized pulp-like tissue regeneration in vivo. The injectable approach based on collagen gel loading BMP7 might exert promising therapeutic application in endogenous pulp regeneration.

BMP7 as a regenerative signaling molecule mediates stem cell migration and odontoblastic differentiation (a) and as a pro-angiogenic factor promotes revascularization of endothelial cells (b). Collagen gel supports cell adhesion, spreading, and viability (c).

Decellularized Avian Cartilage, a Promising Alternative for Human Cartilage Tissue Regeneration

Articular cartilage defects, and subsequent degeneration, are prevalent and account for the poor quality of life of most elderly persons; they are also one of the main predisposing factors to osteoarthritis. Articular cartilage is an avascular tissue and, thus, has limited capacity for healing and self-repair. Damage to the articular cartilage by trauma or pathological causes is irreversible. Many approaches to repair cartilage have been attempted with some potential; however, there is no consensus on any ideal therapy. Tissue engineering holds promise as an approach to regenerate damaged cartilage. Since cell adhesion is a critical step in tissue engineering, providing a 3D microenvironment that recapitulates the cartilage tissue is vital to inducing cartilage regeneration. Decellularized materials have emerged as promising scaffolds for tissue engineering, since this procedure produces scaffolds from native tissues that possess structural and chemical natures that are mimetic of the extracellular matrix (ECM) of the native tissue. In this work, we present, for the first time, a study of decellularized scaffolds, produced from avian articular cartilage (extracted from Gallus Gallus domesticus), reseeded with human chondrocytes, and we demonstrate for the first time that human chondrocytes survived, proliferated and interacted with the scaffolds. Morphological studies of the decellularized scaffolds revealed an interconnected, porous architecture, ideal for cell growth. Mechanical characterization showed that the decellularized scaffolds registered stiffness comparable to the native cartilage tissues. Cell growth inhibition and immunocytochemical analyses showed that the decellularized scaffolds are suitable for cartilage regeneration.

Supramolecular Adhesive Hydrogels for Tissue Engineering Applications

Tissue engineering is a promising and revolutionary strategy to treat patients who suffer the loss or failure of an organ or tissue, with the aim to restore the dysfunctional tissues and enhance life expectancy. Supramolecular adhesive hydrogels are emerging as appealing materials for tissue engineering applications owing to their favorable attributes such as tailorable structure, inherent flexibility, excellent biocompatibility, near-physiological environment, dynamic mechanical strength, and particularly attractive self-adhesiveness. In this review, the key design principles and various supramolecular strategies to construct adhesive hydrogels are comprehensively summarized. Thereafter, the recent research progress regarding their tissue engineering applications, including primarily dermal tissue repair, muscle tissue repair, bone tissue repair, neural tissue repair, vascular tissue repair, oral tissue repair, corneal tissue repair, cardiac tissue repair, fetal membrane repair, hepatic tissue repair, and gastric tissue repair, is systematically highlighted. Finally, the scientific challenges and the remaining opportunities are underlined to show a full picture of the supramolecular adhesive hydrogels. This review is expected to offer comparative views and critical insights to inspire more advanced studies on supramolecular adhesive hydrogels and pave the way for different fields even beyond tissue engineering applications.

Future of Decellularized Dental Pulp Matrix in Regenerative Endodontics

With the advancements in tissue engineering, the repair and regeneration of oral/dental tissue are becoming possible and productive. Due to periodontal diseases, the tooth loses bone support resulting in tooth loss, but bone grafting stabilizes with new bone. It is seen that due to the progression of dental caries, pulp damage happens, and the vitality of the tooth is compromised. The current theme of dental pulp regeneration through biological and synthetic scaffolds, is becoming a potential therapy for pulp revitalization.

Application of Selected Biomaterials and Stem Cells in the Regeneration of Hard Dental Tissue in Paediatric Dentistry-Based on the Current Literature

Currently, the development of the use of biomaterials and their application in medicine is causing rapid changes in the fields of regenerative dentistry. Each year, new research studies allow for the discovery of additional possibilities of dental tissue restoration. The structure and functions of teeth are complex. They consist of several diverse tissues that need to act together to ensure the tooth’s function and durability. The integrity of a tooth’s enamel, dentin, cementum, and pulp tissue allows for successful mastication. Biomaterials that are needed in dentistry must withstand excessive loading forces, be biocompatible with the hosts’ tissues, and stable in the oral cavity environment. Moreover, each tooth’s tissue, as well as aesthetic qualities in most cases, should closely resemble the natural dental tissues. This is why tissue regeneration in dentistry is such a challenge. This scientific research focuses on paediatric dentistry, its classification of caries, and the use of biomaterials in rebuilding hard dental tissues. There are several methods described in the study, including classical conservative methods such as caries infiltration or stainless-steel crowns. Several clinical cases are present, allowing a reader to better understand the described methods. Although the biomaterials mentioned in this work are artificial, there is currently ongoing research regarding clinical stem cell applications, which have a high potential for becoming one of the most common techniques of lost dental-tissue regeneration in the near future. The current state of stem cell development is mentioned, as well as the various methods of its possible application in dentistry.

Zn-Containing Membranes for Guided Bone Regeneration in Dentistry

Barrier membranes are employed in guided bone regeneration (GBR) to facilitate bone in-growth. A bioactive and biomimetic Zn-doped membrane with the ability to participate in bone healing and regeneration is necessary. The aim of the present study is to state the effect of doping the membranes for GBR with zinc compounds in the improvement of bone regeneration. A literature search was conducted using electronic databases, such as PubMed, MEDLINE, DIMDI, Embase, Scopus and Web of Science. A narrative exploratory review was undertaken, focusing on the antibacterial effects, physicochemical and biological properties of Zn-loaded membranes. Bioactivity, bone formation and cytotoxicity were analyzed. Microstructure and mechanical properties of these membranes were also determined. Zn-doped membranes have inhibited in vivo and in vitro bacterial colonization. Zn-alloy and Zn-doped membranes attained good biocompatibility and were found to be non-toxic to cells. The Zn-doped matrices showed feasible mechanical properties, such as flexibility, strength, complex modulus and tan delta. Zn incorporation in polymeric membranes provided the highest regenerative efficiency for bone healing in experimental animals, potentiating osteogenesis, angiogenesis, biological activity and a balanced remodeling. Zn-loaded membranes doped with SiO₂ nanoparticles have performed as bioactive modulators provoking an M2 macrophage increase and are a potential biomaterial for promoting bone repair. Zn-doped membranes have promoted pro-healing phenotypes.

The In Vivo, In Vitro and In Ovo Evaluation of Quantum Dots in Wound Healing: A Review

Wound is defined as primarily damaged or disruption of skin contributed to the loss of its microstructure stability and which undergoes complex wound healing process. However, there are tons of factors that could affect the wound healing process such as infection and slow angiogenesis. Involvement of nanotechnologies therapies in wound care research aims to facilitates this healing process. Quantum dots (QDs) are an advanced nanomaterial technology found to be useful in clinical and biomedical applications. This review has been carried out to provide a summary of the application of QDs in acute or chronic wound healing. A thorough searching was done via Web of Science and SCOPUS database to obtain relevant articles including the in vivo, in vitro and in ovo studies. The results demonstrated a similar effect of different types of QDs, or an improvement of QDs in wound healing, antibacterial and angiogenesis properties. This review demonstrated the effectiveness of QDs for the wound healing process mainly by their antibacterial activity. Uniquely, the antibacterial effect unraveled an increasing trend over time influenced by the various concentration of QDs. In conclusion, the application of QDs support the wound healing phases and proven to be effective in vivo, in vitro and in ovo. However, the future QDs work should focus on the molecular level for the details of cellular interactions and pathways.

Clinical effectiveness of anorganic bovine-derived hydroxyapatite matrix/cell-binding peptide grafts for regeneration of periodontal defects: a systematic review and meta-analysis

Aim: To ascertain clinical effectiveness of anorganic bovine-derived hydroxyapatite matrix/cell-binding peptide (ABM/P-15) for regeneration of periodontal defects. Materials & methods: Electronic databases (National Library of Medicine [Medline by PubMed], Cochrane Library [Wiley], CINAHL [EBSCO] and Medline [EBSCO]) were systematically searched up to December 2019. Randomized controlled clinical trials comparing ABM/P-15 grafts to conventional surgery for intrabony and gingival recession defects were included and evaluated intrabony defects including clinical attachment level (CAL), probing depth and gingival recession. Results: A significant gain in CAL (1.37 mm), and reduction in probing depth (1.22 mm) were shown by ABM/P-15 grafts than open flap debridement (p < 0.00001). The subgroup analysis also showed better results for ABM/P-15 grafts in CAL gain for intrabony defects. For furcation and gingival recession defects, no significant difference was seen. Conclusion: The adjunct use of ABM/P-15 grafts in conventional periodontal surgery is useful for periodontal regeneration of intrabony defects.

Peri-implantitis Update: Risk Indicators, Diagnosis, and Treatment

Despite the success rates of dental implants, peri-implantitis presents as the most common complication in implant dentistry. This review discusses various factors associated with peri-implantitis and various available treatments, highlighting their advantages and disadvantages. Relevant articles on peri-implantitis published in English were reviewed from August 2010 to April 2020 in MEDLINE/PubMed, Scopus, and ScienceDirect. The identified risk indicators of peri-implant diseases are plaque, smoking, history of periodontitis, surface roughness, residual cement, emergence angle >30 degrees, radiation therapy, keratinized tissue width, and function time of the implant, sex, and diabetes. Peri-implantitis treatments can be divided into nonsurgical (mechanical, antiseptic, and antibiotics), surface decontamination (chemical and laser), and surgical (air powder abrasive, resective, and regenerative). However, mechanical debridement alone may fail to eliminate the causative bacteria, and this treatment should be combined with other treatments (antiseptics and surgical treatment). Surface decontamination using chemical agents may be used as an adjuvant treatment; however, the definitive clinical benefit is yet not proven. Laser treatment may result in a short-term decrease in periodontal pocket depth, while air powder abrasive is effective in cleaning a previously contaminated implant surface. Surgical elimination of a pocket, bone recontouring and plaque control are also effective for treating peri-implantitis. The current evidence indicates that regenerative approaches to treat peri-implant defects are unpredictable.

State of the Art on Biomaterials for Soft Tissue Augmentation in the Oral Cavity. Part I: Natural Polymers-Based Biomaterials

Oral soft tissue thickening or grafting procedures are often necessary to cover tooth recession, re-establish an adequate width of keratinized tissue, correct mucogingival deformities improving esthetics, prepare a site for an implant or prosthetics, for ridge preservation procedures, and soft tissue contouring around dental implants. Gingival recession and root or implant exposure are commonly associated and have led to mucogingival deficiencies that have traditionally been treated with free gingival grafts and autogenous soft tissue grafts. The latter represents the gold standard in acquiring a functionally adequate zone of keratinized attached gingiva. However, soft tissue substitutes are more usually employed because they lessen morbidity and abbreviate surgical time. This review is aimed at assessing oral soft tissue augmentation techniques and biomaterials used from existing literature, principally concerning scaffolds from both human and animal-based tissue derivatives matrices. In order to avoid the use of human donor tissue, the xenogenic collagen matrices are proposed for soft tissue augmentation. In general, all of them have provided the remodeling processes and enhanced the formation of new connective tissue within the matrix body.

In Vitro Degradation of Electrospun Poly(Lactic-Co-Glycolic Acid) (PLGA) for Oral Mucosa Regeneration

Poly(lactic-co-glycolic acid) (PLGA) has been used in the field of tissue engineering as a scaffold due to its good biocompatibility, biodegradability and mechanical strength. With the aim to explore the degradability of PLGA electrospun nonwoven structures for oral mucosa tissue engineering applications, non-irradiated and gamma irradiated nonwovens were immersed in three different solutions, in which simulated body fluid (SBF) and artificial saliva are important for future oral mucosa tissue engineering. The nonwovens were immersed for 7, 15 and 30 days in SBF, culture media (DMEM) and artificial saliva at 37 °C. Before immersion in the solutions, the dosage of 15 kGy was applied for sterilization in one assay and compared with non-irradiated samples at the same timepoints. Samples were characterized using different techniques such as scanning electron microscopy (SEM), differential scanning calorimetric (DSC) and gel permeation chromatography (GPC) to evaluate the nonwoven degradation and Fourier-transform infrared spectroscopy (FTIR) to evaluate the chain scissions. Our results showed that PLGA nonwovens were constituted by semicrystalline fibers with moderate degradation properties up to thirty days. The non-irradiated samples exhibited slower kinetics of degradation than irradiated nonwovens. For immersion times longer than 7 days in the three different solutions, the mean diameter of irradiated fibers stayed in the same range, but significantly different from the control sample. On non-irradiated samples, the degradation kinetics was slower and the plateau in the diameter value was only attained after 30 days of immersion in the fluids. Plasticization (fluid absorption into the fiber structure) occurred in the bulk material, as confirmed by a decrease in Tg observed by DSC analyses of non-irradiated and irradiated nonwovens, in comparison with the respective controls. In addition, artificial saliva showed a higher capacity of influencing PLGA crystallization than SBF and DMEM. FTIR analyses showed typical PLGA chemical functional groups changes. These results will be important for future application of those PLGA electrospun nonwovens for oral mucosa regeneration.

State of the Art on Biomaterials for Soft Tissue Augmentation in the Oral Cavity. Part II: Synthetic Polymers-Based Biomaterials

Most of the polymers used as biomaterials for scaffolds are naturally occurring, synthetic biodegradable, and synthetic non-biodegradable polymers. Since synthetic polymers can be adapted for obtaining singular desired characteristics by applying various fabrication techniques, their use has increased in the biomedical field, in dentistry in particular. The manufacturing methods of these new structures include many processes, such as electrospinning, 3D printing, or the use of computer-aided design/computer-aided manufacturing (CAD/CAM). Synthetic polymers show several drawbacks that can limit their use in clinical applications, such as the lack of cellular recognition, biodegradability, and biocompatibility. Moreover, concerning biodegradable polymers, the time for matrix resorption is not predictable, and non-resorbable matrices are preferred for soft tissue augmentation in the oral cavity. This review aimed to determine a new biomaterial to offset the present shortcomings in the oral environment. Researchers have recently proposed a novel non-resorbable composite membrane manufactured via electrospinning that has allowed obtaining remarkable in vivo outcomes concerning angiogenesis and immunomodulation throughout the polarization of macrophages. A prototype of the protocol for in vitro and in vivo experimentation with hydrogels is explained in order to encourage innovation into the development of promising biomaterials for soft tissue augmentation in the near future.

Poly(ε-caprolactone) Titanium Dioxide and Cefuroxime Antimicrobial Scaffolds for Cultivation of Human Limbal Stem Cells

Limbal Stem Cell Deficiency (LSCD) is a very serious and painful disease that often results in impaired vision. Cultivation of limbal stem cells for clinical application is usually performed on carriers such as amniotic membrane or surgical fibrin gel. Transplantation of these grafts is associated with the risk of local postoperative infection that can destroy the graft and devoid therapeutic benefit. For this reason, electrospun scaffolds are good alternatives, as proven to mimic the natural cells surroundings, while their fabrication technique is versatile with regard to polymer functionalization and scaffolds architecture. This study considers the development of poly(ε-caprolactone) (PCL) immune-compatible and biodegradable electrospun scaffolds, comprising cefuroxime (CF) or titanium dioxide (TiO₂) active components, that provide both bactericidal activity against eye infections and support of limbal stem cells growth in vitro. The PCL/CF scaffolds were prepared by blend electrospinning, while functionalization with the TiO₂ particles was performed by ultrasonic post-processing treatment. The fabricated scaffolds were evaluated in regard to their physical structure, wetting ability, static and dynamic mechanical behaviour, antimicrobial efficiency and drug release, through scanning electron microscopy, water contact angle measurement, tensile testing and dynamic mechanical analysis, antimicrobial tests and UV-Vis spectroscopy, respectively. Human limbal stem cells, isolated from surgical remains of human cadaveric cornea, were cultured on the PCL/CF and PCL/TiO₂ scaffolds and further identified through immunocytochemistry in terms of cell type thus were stained against p63 marker for limbal stem cells, a nuclear transcription factor and cytokeratin 3 (CK3), a corneal epithelial differentiation marker. The electrospun PCL/CF and PCL/TiO₂ successfully supported the adhesion, proliferation and differentiation of the cultivated limbal cells and provided the antimicrobial effect against Pseudomonas aeruginosa, Staphylococcus aureus and Candida albicans.

Biomimetic Aspects of Restorative Dentistry Biomaterials

Biomimetic has emerged as a multi-disciplinary science in several biomedical subjects in recent decades, including biomaterials and dentistry. In restorative dentistry, biomimetic approaches have been applied for a range of applications, such as restoring tooth defects using bioinspired peptides to achieve remineralization, bioactive and biomimetic biomaterials, and tissue engineering for regeneration. Advancements in the modern adhesive restorative materials, understanding of biomaterial-tissue interaction at the nano and microscale further enhanced the restorative materials' properties (such as color, morphology, and strength) to mimic natural teeth. In addition, the tissue-engineering approaches resulted in regeneration of lost or damaged dental tissues mimicking their natural counterpart. The aim of the present article is to review various biomimetic approaches used to replace lost or damaged dental tissues using restorative biomaterials and tissue-engineering techniques. In addition, tooth structure, and various biomimetic properties of dental restorative materials and tissue-engineering scaffold materials, are discussed.

Collagen Scaffolds Containing Hydroxyapatite-CaO Fiber Fragments for Bone Tissue Engineering

Collagen (COL) and hydroxyapatite (HAp) are the major components of bone, therefore, COL-HAp composites have been widely used as bone substitutes to promote bone regeneration. We have reported that HAp-CaO fibers (HANFs), which were fabricated by a sol-gel route followed by an electrospinning technique, possessed good drug-loading efficiency and limited the burst release of tetracycline. In the present study, we used HANF fragments to evaluate the effects of COL-HANF scaffolds on MG63 osteoblast-like cell behaviors. COL-HANF composite scaffolds in which the average diameter of HANFs was approximately 461 ± 186 nm were fabricated by a freeze-drying process. The alkaline phosphatase activity and the protein expression levels of OCN and BSP showed that compared with COL alone, the COL-HANF scaffold promoted the differentiation of MG63 osteoblast-like cells. In addition, the bone regeneration ability of the COL-HANF scaffold was examined by using a rabbit condylar defect model in vivo. The COL-HANF scaffold was biodegradable and promoted bone regeneration eight weeks after the operation. Hence, we concluded that the COL-HANF scaffold has potential as a bone graft for bone tissue engineering.

Injectable Biomaterials for Dental Tissue Regeneration

Injectable biomaterials scaffolds play a pivotal role for dental tissue regeneration, as such materials are highly applicable in the dental field, particularly when compared to pre-formed scaffolds. The defects in the maxilla-oral area are normally small, confined and sometimes hard to access. This narrative review describes different types of biomaterials for dental tissue regeneration, and also discusses the potential use of nanofibers for dental tissues. Various studies suggest that tissue engineering approaches involving the use of injectable biomaterials have the potential of restoring not only dental tissue function but also their biological purposes.

Salivary gland tissue engineering to attain clinical benefits: a special report

The salivary glands produce saliva, which helps in mediating the oral colonization of microbes, the repair of mucosa, the remineralization of teeth, lubrication and gustation. However, certain medications, therapeutic radiation and certain autoimmune diseases can cause a reduction in the salivary flow. The aim of this report was to review and highlight the indications and techniques of salivary gland engineering to counter hyposalivation. This report concludes that in the literature, numerous strategies have been suggested and discussed pertaining to the engineering of salivary gland, however, challenges remain in terms of its production and accurate function. Dedicated efforts are required from researchers all over the world to obtain the maximum benefits from salivary gland engineering techniques.

Bioactive Glass Applications in Dentistry

At present, researchers in the field of biomaterials are focusing on the oral hard and soft tissue engineering with bioactive ingredients by activating body immune cells or different proteins of the body. By doing this natural ground substance, tissue component and long-lasting tissues grow. One of the current biomaterials is known as bioactive glass (BAG). The bioactive properties make BAG applicable to several clinical applications involving the regeneration of hard tissues in medicine and dentistry. In dentistry, its uses include dental restorative materials, mineralizing agents, as a coating material for dental implants, pulp capping, root canal treatment, and air-abrasion, and in medicine it has its applications from orthopedics to soft-tissue restoration. This review aims to provide an overview of promising and current uses of bioactive glasses in dentistry.

Enhancer of zeste homolog 2 enhances the migration and chemotaxis of dental mesenchymal stem cells

Objective

To investigate the function of enhancer of zeste homolog 2 (EZH2) in the migration and chemotaxis of human dental tissue-derived mesenchymal stem cells.

Methods

The expression of EZH2, C-X-C motif chemokine ligand 11 (CXCL11), CXCL16, and CXCR1 in stem cells from the apical papilla (SCAPs) was determined by real-time reverse transcription PCR and western blotting. The effects of EZH2 on the homing of SCAPs and the effects of EZH2-overexpressing SCAP culture supernatant on periodontal ligament stem cells (PDLSCs) were tested by scratch migration assays and transwell chemotaxis assays.

Results

EZH2 overexpression significantly enhanced the migration and chemotaxis of SCAPs and upregulated the expression of CXCL11, CXCL16, and CXCR1 in SCAPs. EZH2 depletion had the opposite effect, impairing the migration and chemotaxis of SCAPs and downregulating the expression of CXCL11, CXCL16, and CXCR1. The culture supernatant of EZH2-overexpressing SCAPs advanced the migration and chemotaxis of PDLSCs.

Conclusions

EZH2 evidently promoted the migration and chemotaxis of SCAPs by upregulating the expression of CXCL11, CXCL16, and CXCR1. Moreover, EZH2-overexpressing SCAPs enhanced the homing, migration, and chemotaxis of PDLSCs via paracrine signaling.

Potential for Drug Repositioning of Midazolam for Dentin Regeneration

Drug repositioning promises the advantages of reducing costs and expediting approval schedules. An induction of the anesthetic and sedative drug; midazolam (MDZ), regulates inhibitory neurotransmitters in the vertebrate nervous system. In this study we show the potential for drug repositioning of MDZ for dentin regeneration. A porcine dental pulp-derived cell line (PPU-7) that we established was cultured in MDZ-only, the combination of MDZ with bone morphogenetic protein 2, and the combination of MDZ with transforming growth factor-beta 1. The differentiation of PPU-7 into odontoblasts was investigated at the cell biological and genetic level. Mineralized nodules formed in PPU-7 were characterized at the protein and crystal engineering levels. The MDZ-only treatment enhanced the alkaline phosphatase activity and mRNA levels of odontoblast differentiation marker genes, and precipitated nodule formation containing a dentin-specific protein (dentin phosphoprotein). The nodules consisted of randomly oriented hydroxyapatite nanorods and nanoparticles. The morphology, orientation, and chemical composition of the hydroxyapatite crystals were similar to those of hydroxyapatite that had transformed from amorphous calcium phosphate nanoparticles, as well as the hydroxyapatite in human molar dentin. Our investigation showed that a combination of MDZ and PPU-7 cells possesses high potential of drug repositioning for dentin regeneration.

Pharmaceutical applications of chitosan

Chitosan (CS) is a linear polysaccharide which is achieved by deacetylation of chitin, which is the second most plentiful compound in nature, after cellulose. It is a linear copolymer of β-(1 → 4)-linked 2-acetamido-2-deoxy-β-d-glucopyranose and 2-amino-2-deoxy-β-d-glucopyranose. It has appreciated properties such as biocompatibility, biodegradability, hydrophilicity, nontoxicity, high bioavailability, simplicity of modification, favorable permselectivity of water, outstanding chemical resistance, capability to form films, gels, nanoparticles, microparticles and beads as well as affinity to metals, proteins and dyes. Also, the biodegradable CS is broken down in the human body to safe compounds (amino sugars) which are easily absorbed. At present, CS and its derivatives are broadly investigated in numerous pharmaceutical and medical applications including drug/gene delivery, wound dressings, implants, contact lenses, tissue engineering and cell encapsulation. Besides, CS has several OH and NH₂ functional groups which allow protein binding. CS with a deacetylation degree of ~50% is soluble in aqueous acidic environment. While CS is dissolved in acidic medium, its amino groups in the polymeric chains are protonated and it becomes cationic which allows its strong interaction with different kinds of molecules. It is believed that this positive charge is responsible for the antimicrobial activity of CS through the interaction with the negatively charged cell membranes of microorganisms. This review presents properties and numerous applications of chitosan-based compounds in drug delivery, gene delivery, cell encapsulation, protein binding, tissue engineering, preparation of implants and contact lenses, wound healing, bioimaging, antimicrobial food additives, antibacterial food packaging materials and antibacterial textiles. Moreover, some recent molecular dynamics simulations accomplished on the pharmaceutical applications of chitosan were presented.

Recent Overviews in Functional Polymer Composites for Biomedical Applications

Composite materials are considered as an essential part of our daily life due to their outstanding properties and diverse applications. Polymer composites are a widespread class of composites, characterized by low cost, facile processing methods, and varied applications ranging from daily-use issues to highly complicated electronics and advanced medical combinations. In this review, we focus on the most important fabrication techniques for bioapplied polymer composites such as electrospinning, melt-extrusion, solution mixing, and latex technology, as well as in situ methods. Additionally, significant and recent advances in biomedical applications are spotlighted, such as tissue engineering (including bone, blood vessels, oral tissues, and skin), dental resin-based composites, and wound dressing.

Synergistic Effect of Cold Plasma Treatment and RGD Peptide Coating on Cell Proliferation over Titanium Surfaces

The aim of this study was to investigate the synergistic effect of cold atmospheric plasma (CAP) treatment and RGD peptide coating for enhancing cellular attachment and proliferation over titanium (Ti) surfaces. The surface structure of CAP-treated and RGD peptide-coated Ti discs were characterized by contact angle goniometer and atomic force microscopy. The effect of such surface modification on human bone marrow derived mesenchymal stem cells (hMSCs) adhesion and proliferation was assessed by cell proliferation and DNA content assays. Besides, hMSCs' adhesion and morphology on surface modified Ti discs were observed via fluorescent and scanning electron microscopy. RGD peptide coating following CAP treatment significantly enhanced cellular adhesion and proliferation among untreated, CAP-treated and RGD peptide-coated Ti discs. The treatment of Ti surfaces with CAP may contribute to improved RGD peptide coating, which enables increased cellular integrations with the Ti surfaces.

Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine

Electrospinning has been used for decades to generate nano-fibres via an electrically charged jet of polymer solution. This process is established on a spinning technique, using electrostatic forces to produce fine fibres from polymer solutions. Amongst, the electrospinning of available biopolymers (silk, cellulose, collagen, gelatine and hyaluronic acid), chitosan (CH) has shown a favourable outcome for tissue regeneration applications. The aim of the current review is to assess the current literature about electrospinning chitosan and its composite formulations for creating fibres in combination with other natural polymers to be employed in tissue engineering. In addition, various polymers blended with chitosan for electrospinning have been discussed in terms of their potential biomedical applications. The review shows that evidence exists in support of the favourable properties and biocompatibility of chitosan electrospun composite biomaterials for a range of applications. However, further research and in vivo studies are required to translate these materials from the laboratory to clinical applications.

Regenerative Potential of Platelet Rich Fibrin (PRF) for Curing Intrabony Periodontal Defects: A Systematic Review of Clinical Studies

Platelet-rich fibrin (PRF) has been used in regenerative medicine and dentistry. Recently, its use has been advocated for regenerative periodontics and wound healing. The randomized control trials have assessed the regenerative efficacy of the PRF for restoring intrabony periodontal defects. The objectives are to critically analyze and appraise the currently available literature, focusing on the use of PRF in regenerating periodontal bone defects. An electronic search was conducted (PubMed/MEDLINE, Google Scholar, ISI-WOS). Various combinations of following keywords were used: 'platelet-rich fibrin', 'intrabony', 'periodontal', 'bone defect' and 'guided tissue regeneration'. A secondary search was conducted by analyzing the reference lists of the articles obtained in initial search. The final search resulted in 13 randomized controlled trials being included. In majority of studies, PRF resulted in better clinical/radiographic outcomes than open flap debridement and augmented therapeutic effects of bone grafts. The combination of bovine bone substitutes and PRF resulted in better performance compared to alone. Similarly better outcomes were observed while using PRF in combination with nanohydroxyapatite, metformin and demineralized freeze-dried bone allograft. It can be concluded that PRF produces better outcomes than open flap debridement alone and augments the regenerative effects of bone substitutes.

Chitosan Biomaterials for Current and Potential Dental Applications

Chitosan (CHS) is a very versatile natural biomaterial that has been explored for a range of bio-dental applications. CHS has numerous favourable properties such as biocompatibility, hydrophilicity, biodegradability, and a broad antibacterial spectrum (covering gram-negative and gram-positive bacteria as well as fungi). In addition, the molecular structure boasts reactive functional groups that provide numerous reaction sites and opportunities for forging electrochemical relationships at the cellular and molecular levels. The unique properties of CHS have attracted materials scientists around the globe to explore it for bio-dental applications. This review aims to highlight and discuss the hype around the development of novel chitosan biomaterials. Utilizing chitosan as a critical additive for the modification and improvement of existing dental materials has also been discussed.

Composite Electrospun Scaffold Derived from Recombinant Fibroin of Weaver Ant (Oecophylla smaragdina) as Cell-Substratum

Unlike silkworm (Bombyx mori) fibroin (SF), weaver ant (Oecophylla smaragdina) fibroin (WAF) is much less studied. Due to differences in amino acid composition and protein structure, this work aimed to produce the recombinant WAF protein, designated as WAF1, and investigated on its potential application as a biomaterial for producing a cell-substratum. The composite electrospun scaffolds derived from poly(vinyl alcohol) (PVA), WAF1, and extracted SF were produced by electrospinning. SEM images revealed non-woven and smooth fibers of PVA, PVA-WAF1, and PVA-SF scaffolds with the average diameters of 204.1 ± 59.9, 206.5 ± 71.5, and 238.4 ± 77.9 nm, respectively. ATR-FTIR spectra indicated characteristic absorption peaks related to the chemical structure of PVA and protein. The PVA-WAF1 scaffold demonstrated a higher water uptake, a slightly higher rate of degradation, and a similar low cytotoxicity as compared with the PVA-SF scaffold. Although the adhesion and proliferation of cells on the PVA-WAF1 scaffold were lower than those on the PVA-SF scaffold, it showed significantly greater values of adhering and proliferating cells than the PVA scaffold. The results of this work suggested that WAF1 could be used as a biomaterial for producing a cell-substratum that supports cell adhesion and growth.

Gene Therapy: A Paradigm Shift in Dentistry

Gene therapy holds a promising future for bridging the gap between the disciplines of medicine and clinical dentistry. The dynamic treatment approaches of gene therapy have been advancing by leaps and bounds. They are transforming the conventional approaches into more precise and preventive ones that may limit the need of using drugs and surgery. The oral cavity is one of the most accessible areas for the clinical applications of gene therapy for various oral tissues. The idea of genetic engineering has become more exciting due to its advantages over other treatment modalities. For instance, the body is neither subjected to an invasive surgery nor deep wounds, nor is it susceptible to systemic effects of drugs. The aim of this article is to review the gene therapy applications in the field of dentistry. In addition, therapeutic benefits in terms of treatment of diseases, minimal invasion and maximum outcomes have been discussed.

The Role of Nutrition in Periodontal Health: An Update

Periodontal health is influenced by a number of factors such as oral hygiene, genetic and epigenetic factors, systemic health, and nutrition. Many studies have observed that a balanced diet has an essential role in maintaining periodontal health. Additionally, the influences of nutritional supplements and dietary components have been known to affect healing after periodontal surgery. Studies have attempted to find a correlation between tooth loss, periodontal health, and nutrition. Moreover, bone formation and periodontal regeneration are also affected by numerous vitamins, minerals, and trace elements. The aim of this review is to critically appraise the currently available data on diet and maintenance of periodontal health and periodontal healing. The effects of nutritional intervention studies to improve the quality of life and well-being of patients with periodontal disease have been discussed.

Human Saliva Collection Devices for Proteomics: An Update

There has been a rapid growth in the interest and adaptation of saliva as a diagnostic specimen over the last decade, and in the last few years in particular, there have been major developments involving the application of saliva as a clinically relevant specimen. Saliva provides a “window” into the oral and systemic health of an individual, and like other bodily fluids, saliva can be analyzed and studied to diagnose diseases. With the advent of new, more sensitive technologies to detect smaller concentrations of analytes in saliva relative to blood levels, there have been a number of critical developments in the field that we will describe. In particular, recent advances in standardized saliva collection devices that were not available three to four years ago, have made it easy for safe, simple, and non-invasive collection of samples to be carried out from patients. With the availability of these new technologies, we believe that in the next decade salivary proteomics will make it possible to predict and diagnose oral as well as systemic diseases, cancer, and infectious diseases, among others. The aim of this article is to review recent developments and advances in the area of saliva specimen collection devices and applications that will advance the field of proteomics.

Tooth tissue engineering: tooth decellularization for natural scaffold

AIM

Tissue engineering is a multidisciplinary science that aims to produce replacement organs and biological substitutes. One of the techniques involves decellularizing a biological organ without altering its structure. One challenge is how to demonstrate which method would be better for this process.

METHODOLOGY

Fifty premolar teeth were divided into five groups: G1 (control): solution of 10% formaldehyde; G2: phosphate buffer saline (PBS), 28 g of tetrasodium ethylenediaminetetraacetic (EDTA), sodium hypochlorite 2.5% (SH); G3: PBS, EDTA and 40v hydrogen peroxide (HP); G4: PBS, EDTA, SH, enzymatic detergent (ED); and G5: PBS, EDTA, HP, ED. Each group was analyzed by scanning electron microscopy (SEM), x-ray, measured weights and color and received statistical analysis.

CONCLUSION

This study demonstrated that G5 was the most appropriate method to obtain a natural scaffold.

Advances of Proteomic Sciences in Dentistry

Applications of proteomics tools revolutionized various biomedical disciplines such as genetics, molecular biology, medicine, and dentistry. The aim of this review is to highlight the major milestones in proteomics in dentistry during the last fifteen years. Human oral cavity contains hard and soft tissues and various biofluids including saliva and crevicular fluid. Proteomics has brought revolution in dentistry by helping in the early diagnosis of various diseases identified by the detection of numerous biomarkers present in the oral fluids. This paper covers the role of proteomics tools for the analysis of oral tissues. In addition, dental materials proteomics and their future directions are discussed.

Prospects of chitosan-based scaffolds for growth factor release in tissue engineering

Tissue engineering is concerned about the rejuvenation and restoration of diseased and damages tissues/organs using man-made scaffolds that mimic the native environment of the cells. In recent years, a variety of biocompatible and biodegradable natural materials is employed for the fabrication of such scaffolds. Of these natural materials, chitosan is the most preferred one as it imitates the extracellular matrix (ECM) of the cells. Moreover, chitosan-based materials are pro-angiogenic and have antibacterial activity. These materials can be easily fabricated into the desired shape of the scaffolds that are suitable for tissue support and regeneration. Growth factors are small proteins/peptides that support and enhance the growth and differentiation of cells into a specific lineage. It has been observed that scaffolds capable of delivering growth factor promote tissue repair and regeneration at a faster rate when compared to scaffolds without growth factor. The present review focuses on the recent developments on chitosan-based scaffolds for the delivery of growth factors thereby improving and enhancing tissue regeneration.

Potential of Electrospun Nanofibers for Biomedical and Dental Applications

Electrospinning is a versatile technique that has gained popularity for various biomedical applications in recent years. Electrospinning is being used for fabricating nanofibers for various biomedical and dental applications such as tooth regeneration, wound healing and prevention of dental caries. Electrospun materials have the benefits of unique properties for instance, high surface area to volume ratio, enhanced cellular interactions, protein absorption to facilitate binding sites for cell receptors. Extensive research has been conducted to explore the potential of electrospun nanofibers for repair and regeneration of various dental and oral tissues including dental pulp, dentin, periodontal tissues, oral mucosa and skeletal tissues. However, there are a few limitations of electrospinning hindering the progress of these materials to practical or clinical applications. In terms of biomaterials aspects, the better understanding of controlled fabrication, properties and functioning of electrospun materials is required to overcome the limitations. More in vivo studies are definitely required to evaluate the biocompatibility of electrospun scaffolds. Furthermore, mechanical properties of such scaffolds should be enhanced so that they resist mechanical stresses during tissue regeneration applications. The objective of this article is to review the current progress of electrospun nanofibers for biomedical and dental applications. In addition, various aspects of electrospun materials in relation to potential dental applications have been discussed.

Novel three-dimensional, conducting, biocompatible, porous, and elastic polyaniline-based scaffolds for regenerative therapies

Fabrication of two novel three-dimensional, conducting, biocompatible, porous, and elastic scaffolds composed of hyperbranched aliphatic polyesters, polyaniline, and poly(ε-caprolactone) for tissue engineering applications.