Green synthesis of manganese oxide nanoparticles for the electrochemical sensing of p-nitrophenol

Potential in-vitro antioxidant and anti-inflammatory activity of Martynia annua extract mediated Phytosynthesis of MnO2 nanoparticles

The present research work describes the phyto-synthesis of Manganese dioxide nanoparticles (MnO2NPs) from the reduction of potassium permanganate using Martynia annua (M.annua) plant extract. From the literature review, we clearly understood the M.annua plant has anti-inflammatory activity. Manganese dioxides are important materials due to their wide range of applications. Their increased surface area gives them distinct capabilities, as it increases their mechanical, magnetic, optical, and catalytic qualities, allowing them to be used in more pharmaceutical applications. A detailed review of literature highlighting the issues related to this present work and its knowledge gap that none of the inflammatory activities had been done by MnO2 NPs synthesized from M.annua plant extract. So we selected this study. The product MnO2 NPs showed the wavelength centre at 370 nm and was monitored by UV-Vis spectra. The wave number around 600 cm-1 has to the occurrence of O-Mn-O bonds of pure MnO2 confirmed by FTIR spectroscopy. Transmission electron microscopy images showed the morphology of MnO2 NPs as spherical-shaped particles with average sizes at 7.5 nm. The selected area electron diffraction analysis exhibits the crystalline nature of MnO2 NPs. The obtained MnO2 NPs showed potential antioxidant and anti-inflammatory activity was compared to the plant extract. The synthesized MnO2 NPs have a large number of potential applications in the field of pharmaceutical industries. In the future, we isolate the phytocompounds present in the M.annua plant extract and conduct a study against corona virus. MnO2 produces manganese (III) oxide and oxygen, which increases fire hazard. But further research is required to understand their environmental behaviour and safety.

Manganese Nanoparticles: Synthesis, Mechanisms of Influence on Plant Resistance to Stress, and Prospects for Application in Agricultural Chemistry

Manganese (Mn) is an important microelement for the mineral nutrition of plants, but it is not effectively absorbed from the soil and mineral salts added thereto and can also be toxic in high concentrations. Mn nanoparticles (NPs) are less toxic, more effective, and economical than Mn salts due to their nanosize. This article critically reviews the current publications on Mn NPs, focusing on their effects on plant health, growth, and stress tolerance, and explaining possible mechanisms of their effects. This review also provides basic information and examples of chemical, physical, and ecological ("green") methods for the synthesis of Mn NPs. It has been shown that the protective effect of Mn NPs is associated with their antioxidant activity, activation of systemic acquired resistance (SAR), and pronounced antimicrobial activity against phytopathogens. In conclusion, Mn NPs are promising agents for agriculture, but their effects on gene expression and plant microbiome require further research.

Influence of bio fabricated manganese oxide nanoparticles for effective callogenesis of Moringa oleifera Lam

The use of nanoscale fertilizers to boost crop output has increased in recent years. Nanoparticles (NPs) can stimulate the biosynthesis of bioactive compounds in plants. It is the first report on biosynthesized manganese oxide nanoparticles (MnO-NPs) that mediate in-vitro callus induction of Moringa oleifera. To achieve better biocompatibility the leaf extract of Syzygium cumini was used to synthesize MnO-NPs. Scanning electron microscope SEM revealed spherical shaped morphology of MnO-NPs with an average diameter of 36 ± 0.3 nm. Energy-dispersive X-ray spectroscopy (EDX) depicted the formation of pure MnO-NPs. X-ray diffraction (XRD) and Fourier Transform Infrared (FTIR) authenticate the crystalline structure. UV-visible absorption spectroscopy depicted the activity of MnO-NPs under visible light. The biosynthesized MnO-NPs were concentration-dependent and revealed promising results in callus induction of Moringa oleifera. It was found that MnO-NPs enhance callus production of Moringa oleifera and keep the callus infection free by providing an optimum environment for rapid growth and development. Therefore MnO-NPs synthesized through the green process can be utilized in tissue culture studies. This study concludes that MnO is one of the essential plant nutrients that have tailored nutritive properties at a nano scale.

Removal of bisphenol A and methylene blue through persulfate activation by calcinated α-MnO2 nanorods: effect of ultrasonic assistance and toxicity assessment

This work investigates the efficacy of α-MnO₂ nanorods for persulfate-mediated degradation of bisphenol A (BPA) and methylene blue (MB), in silent and ultrasonic-assisted systems. The conversion of α-MnO₂ nanoparticle flakes to nanorods occurs upon calcination at a temperature of 400 °C for 3 h under the ramping conditions. The comparative characterization of nanomaterials pre- and post-calcination reveals better physical, chemical, and thermal properties of α-MnO₂ nanorods. The impact of various operational parameters such as pH, dosage of nanorods, persulfate dose, selected contaminant concentration, ultrasound frequency and power, scavengers, and landfill leachate medium on the degradation of pollutants is also assessed. The ultrasonic assistance yields higher removal for both BPA and MB than the silent system. This may be attributed to the generation of more radicals as ultrasound activates persulfate. This can be due to acoustic cavitation, which leads to better solute dissociation and excited state. The results obtained through scavenger tests reveal that both OH^• and SO₄^•- can contribute to degradation, but the role of SO₄^•- is found dominant. Significant removal of BPA and MB ((BPA)_silent, 87.12%; (MB)_silent, 96.54%; (BPA)_ultrasonic, 88.75%; (MB)_ultrasonic, 93.86%)) is observed in landfill leachate medium. The degradation pathway for pollutants is also proposed. The toxicity of pollutants and their degradation intermediates are evaluated using Ecological Structure Activity Relationships (ECOSAR) program. The results indicate reduced toxicity of BPA intermediates, while most MB degradation intermediates show higher toxicity. Therefore, it can be affirmed that removing pollutants does not ensure a completely non-toxic process. However, the study proposes a comprehensive toxicity evaluation and eliminating toxic intermediates for completely harmless wastewater treatment.

A green and environmental sustainable approach to synthesis the Mn oxide nanomaterial from Punica granatum leaf extracts and its in vitro biological applications

Pathogenic fungal infections in fruit cause economic losses and have deleterious effects on human health globally. Despite the low pH and high water contents of vegetables and fresh, ripened fruits, they are prone to fungal and bacterial diseases. The ever-increasing resistance of phytopathogens toward pesticides, fungicides and bactericides has resulted in substantial threats to plant growth and production in recent years. However, plant-mediated nanoparticles are useful tools for combating parasitic fungi and bacteria. Herein, we synthesized biogenic manganese oxide nanoparticles (MnONPs) from an extract of Punica granatum (P. granatum), and these nanoparticles showed significant antifungal and antibacterial activities. The production of MnONPs from plant extracts was confirmed by infrared spectroscopy (FTIR), X-ray diffraction (XRD) and UV visible spectroscopy (UV). The surface morphology and shape of the nanoparticles were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Using a detached fruit method, the MnONPs were shown to exhibit significant antimicrobial activities against two bacterial strains, E. coli and S. aureus, and against the fungal species P. digitatum. The results revealed that the MnONPs had a minimum antimicrobial activity at 25 µg/mL and a maximum antimicrobial activity at 100 µg/mL against bacterial strains in lemon (citrus). Furthermore, the MnONPs exhibited significant ROS scavenging activity. Finally, inconclusive results from the green-synthesized MnONPs magnified their significant synergetic effects on the shelf life of tomatoes (Lycopercicum esculantum) and indicated that they could be used to counteract the phytopathological effects of postharvest fungal diseases in fruits and vegetables. Overall, this method of MnONPs synthesis is inexpensive, rapid and ecofriendly. MnONPs can be used as potential antimicrobial agents against different microbial species.

Electrochemical determination of dinitolmide in poultry product samples using a highly sensitive Mn2O3/MCNTs-NPs carbon paste electrode aided by greenness assessment tools

In this paper, chemically modified carbon paste Mn₂O₃/MCNTs-NPs electrode for estimation of dinitolmide (DOM) utilizing square wave voltammetry method (SWV) was developed. The study investigated the electrochemical behavior of DOM, and the morphology of the modified electrode was evaluated by Scanning Electron Microscope (SEM) and Transmission Electron Microscope (TEM). The voltammetric behavior of DOM at modified electrode was recorded at a scan rate of 100 mVs^-1 against Ag/AgCl reference electrode in phosphate buffer pH 4.0 within linearity range 2-12 µM, LOQ, and LOD of 1.8 and 0.594 µM, respectively, with average % recovery of (100.89 ± 0.795). GAPI and Analytical Eco-Scale tools were applied for greenness assessment. Specificity and interference study was valid for the proposed method; allowing DOM to be determined in its acidic degradation and its major interference drug. The proposed method was successfully employed to quantify DOM in bulk powder, egg, and frozen cuts-up chicken muscle samples.

Dynamic green synthesis of iron oxide and manganese oxide nanoparticles and their cogent antimicrobial, environmental and electrical applications

The scientific community is inclined towards addressing environmental and energy concerns through sustainable means. Conventional processes such as chemical synthesis, involve the usage of environmentally harmful ligands and high tech facilities, which are time-consuming, expensive, energy-intensive, and require extreme conditions for synthesis. Plant-based synthesis is valuable and sustainable for the ecosystem. The use of plant-based precursors for nanoparticle synthesis eliminates the menace of toxic waste contamination. The present review elucidates that the plant based synthesized iron oxide and manganese oxide nanoparticles have tremendous and exceptional applications in various fields such as antimicrobial and antioxidative domains, environmental, electrical and sensing properties. Hence, the literature reviewed explains that plant based synthesis of nanoparticles is an adept and preferred technique. These important transition oxide metal nanoparticles have great applicability in ecological, environmental science as well as electrochemistry and sensing technology. Both these metal oxides display a stable and adaptable nature, which can be functionalized for a specific application, thus exhibiting great potential for efficiency. The current review epitomizes all the latest reported work on the synthesis of iron and manganese oxide nanoparticles through a greener approach along with explaining various significant applications keeping in view the concept of sustainability.

Manganese-based advanced nanoparticles for biomedical applications: future opportunity and challenges

Nanotechnology is the most promising technology to evolve in the last decade. Recent research has shown that transition metal nanoparticles especially manganese (Mn)-based nanoparticles have great potential for various biomedical applications due to their unique fundamental properties. Therefore, globally, scientists are concentrating on the development of various new manganese-based nanoparticles (size and shape dependent) due to their indispensable utilities. Although numerous reports are available regarding the use of manganese nanoparticles, there is no comprehensive review highlighting the recent development of manganese-based nanomaterials and their potential applications in the area of biomedical sciences. The present review article provides an overall survey on the recent advancement of manganese nanomaterials in biomedical nanotechnology and other fields. Further, the future perspectives and challenges are also discussed to explore the wider application of manganese nanoparticles in the near future. Overall, this review presents a fundamental understanding and the role of manganese in various fields, which will attract a wider spectrum of the scientific community.

Novel SnO2@ZIF-8/gC3N4 nanohybrids for excellent electrochemical performance towards sensing of p-nitrophenol

Herein, a novel synthetic strategy has been proposed to prepare engineered SnO₂@ZIF-8/gC₃N₄ nanohybrids for electrochemical sensing of p-nitrophenol (p-NP). The electrochemical properties were investigated using cyclic voltammetry (CV), chronoamperometry (CA), and differential pulse voltammetry (DPV). The developed nanohybrid sensor displayed an excellent electrochemical performance towards sensing of p-NP with a detection limit of 0.565 μM. The sensitivity of the prepared nanohybrid was found to be 2.63 μAcm^-2μM^-1. Moreover, the newly fabricated sensor exhibited remarkable selectivity (over tenfold excess) in the presence of common interferents. The simultaneous detection of isomers of nitrophenol is difficult using the developed sensor. However, other common interferents, such as phenol and aminophenol have negligible effects on the sensitivity of SnO₂@ZIF-8/gC₃N₄ towards the detection of p-nitrophenol. Further, the newly developed sensor showed consistency of sensing response up to 30 days. Thus, implementation of SnO₂@ZIF-8/gC₃N₄ nanohybrids as a p-NP electrochemical sensor offers the advantages of simplicity, selectivity, and stability.

Biosynthesis of silver nanospheres, kinetic profiling and their application in the optical sensing of mercury and chlorite ions in aqueous solutions

Pollution of water linked to microbial decontamination and extensive use of sodium chlorite (NaClO₂) as a disinfectant, especially in the face of the current COVID-19 situation, is a serious water pollution issue that needs to be addressed. In this context, an environmentally friendly and cost-effective method has been developed for the biomimetic synthesis of Ag nanospheres (Ag NSs) using aqueous extract of Piper nigrum for the detection of chlorite (ClO₂^-) and mercury (Hg²⁺) ions. The strong antioxidant properties of the biomolecules present in the Piper nigrum extract reduce silver ions (Ag⁺) to Ag⁰. After optimization of the formulation parameters, it was observed that 1 mL of piper nigrum extract was sufficient to reduce and stabilize 100 mL of 1.5 mM of Ag⁺ in 2.5 h at 30 °C. X-ray diffraction (XRD) pattern of Ag NSs revealed their crystalline nature and the characteristic Bragg's diffraction peaks confirmed their face cubic crystal (FCC) lattice. The characteristic reddish-brown color and absorption surface plasmon resonance (SPR) band at 435 nm confirmed the successful fabrication of Ag NSs. Kinetic analysis revealed a three-phase growth pattern involving nucleation, growth and stabilization. Transmission electron microscopy (TEM) and High-resolution transmission electron microscopy (HRTEM) micrograms, showed spherical NSs with narrow polydispersity with particle size ranging from 10 to 30 nm. The synthesized NSs were exposed to various metal ions and anions. The absorption intensity of Ag NSs quenched in the presence of mercury ions (Hg²⁺) among the cations and Chlorite ions (ClO₂^-) among the anions. The limit of detection (LOD) of 7.47 μM and 1.11 μM was evaluated from the calibration curve for Hg²⁺ and ClO₂^-, respectively. Based on these promising results, it is suggested that the method reported is a low-cost and one step biogenic protocol for the synthesis of Ag NSs and their employment for the detection of Hg²⁺ and ClO₂^-ions.

Exploiting of Green Synthesized Metal Oxide Nanoparticles for Spectrophotometric Determination of Levofloxacin, Cephalexin, and Cefotaxime Sodium in Commercial Products

In this study, two metal oxide nanoparticles NiO and MnO₂ were synthesized from green sources Mentha spicata (M. spicata) extract and Malus domestica (M. domestica) peel extract, respectively. The optical and physical properties of the synthesized nanoparticles were characterized using spectroscopic and microscopic techniques. Simple, precise, and new spectrophotometric probes were suggested for the determination of three cephalosporin antibiotics, including levofloxacin (LVX), cephalexin (CPX), and cefotaxime sodium (CTX) in their pure form and commercial products. The spectrophotometric detection of the selected drugs is based on the catalytic enhancement of NiO and MnO₂ nanoparticles (NPs) due to their unique optical properties. Linear relationships with main correlation coefficients 0.999 were obtained at 0.1–20, 1.0–80, and 0.001–100 µg mL⁻¹ for the three drugs in the presence of NiONPs, whereas 0.01–60, 0.1–160, and 0.01–80 µg mL⁻¹ were obtained in the presence of MnO₂NPs at absorption wavelengths 290, 262, and 235 nm for LVX, CPX and CTX, respectively. The analytical methods were validated and successfully used for determination of the instigated drugs in their bulk and commercial dosage forms.

Mn3O4 nanoparticles: Synthesis, characterization and their antimicrobial and anticancer activity against A549 and MCF-7 cell lines

Due to their inexpensive and eco-friendly nature, and existence of manganese in various oxidation states and their natural abundance have attained significant attention for the formation of Mn₃O₄ nanoparticles (Mn₃O₄ NPs). Herein, we report the preparation of Mn₃O₄ nanoparticles using manganese nitrate as a precursor material by utilization of a precipitation technique. The as-prepared Mn₃O₄ nanoparticles (Mn₃O₄ NPs) were characterized by using X-ray powder diffraction (XRD), UV-Visible spectroscopy (UV-Vis), High-Resolution Transmission electron microscopy (HRTEM), Field emission scanning electron microscopy (FESEM), Thermal gravimetric analysis (TGA) and Fourier-transform infrared spectroscopy (FT-IR). The antimicrobial properties of the as-synthesized Mn₃O₄ nanoparticles were investigated against numerous bacterial and fungal strains including S. aureus, E. coli, B. subtilis, P. aeruginosa, A. flavus and C. albicans. The Mn₃O₄ NPs inhibited the growth of S. aureus with a minimum inhibitory concentration (MIC) of 40 μg/ml and C. albicans with a MIC of 15 μg/ml. Furthermore, the Mn₃O₄ NPs anti-cancer activity was examined using MTT essay against A549 lung and MCF-7 breast cancer cell lines. The Mn₃O₄ NPs revealed significant activity against the examined cancer cell lines A549 and MCF-7. The IC₅₀ values of Mn₃O₄ NPs with A549 cell line was found at concentration of 98 µg/mL and MCF-7 cell line was found at concentration of 25 µg/mL.

Application of biosynthesized metal nanoparticles in electrochemical sensors

Recently, the development of eco-friendly, cost-effective and reliable methods for synthesis of metal nanoparticles has drawn a considerable attention. The so-called green synthesis, using mild reaction conditions and natural resources as plant extracts and microorganisms, has established as a convenient, sustainable, cheap and environmentally safe approach for synthesis of a wide range of nanomaterials. Over the past decade, biosynthesis is regarded as an important tool for reducing the harmful effects of traditional nanoparticle synthesis methods commonly used in laboratories and industry. This review emphasizes the significance of biosynthesized metal nanoparticles in the field of electrochemical sensing. There is increasing evidence that green synthesis of nanoparticles provides a new direction in designing of cost-effective, highly sensitive and selective electrode-catalysts applicable in food, clinical and environmental analysis. The article is based on 157 references and provided a detailed overview on the main approaches for green synthesis of metal nanoparticles and their applications in designing of electrochemical sensor devices. Important operational characteristics including sensitivity, dynamic range, limit of detection, as well as data on stability and reproducibility of sensors have also been covered.

An electrochemical platform for the selective detection of azathioprine utilizing a screen-printed carbon electrode modified with manganese oxide/reduced graphene oxide

Scheme representing the electro-reduction of AZT at Mn₂O₃–rGO/SPCE.

Facile Synthesis of Silver-Doped Zinc Oxide Nanostructures as Efficient Scaffolds for Detection of p-Nitrophenol

In this paper, silver-doped zinc oxide nanoparticles were synthesized by using a solution combustion technique, in which zinc nitrate is used as an oxidizer and tartaric acid as a fuel. The phase composition, morphology and structural properties of the as-synthesized zinc oxide and silver-doped zinc oxide were established by using powdered X-ray diffraction, field emission scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy, and X-ray photoelectron spectroscopy studies. Due to well-defined morphologies and crystallinity, the pure zinc oxide and silver-doped zinc oxide nanostructures can be used as efficient chemical sensors for the detection of p-nitrophenol (PNP). ZnO was found to show a low value of the limit of detection (LOD), i.e., 2.175 µM/L, for p-nitrophenol sensing; moreover, a sharp decrease in the limit of detection was observed with an increase in the concentration of silver ions, and the LOD value decreased to 0.669 µM/L for 10 mol % silver-doped zinc oxide. It is therefore concluded that Ag-doped ZnO shows a lower limit of detection as compared to pure ZnO for p-nitrophenol sensing.

Paraquat Degradation by Biological Manganese Oxide (BioMnO x ) Catalyst Generated From Living Microalga Pediastrum duplex AARL G060

Paraquat is a non-selective fast-acting herbicide used to control weeds in agricultural crops. Many years of extensive use has caused environmental pollution and food toxicity. This agrochemical degrades slowly in nature, adsorbs onto clay lattices, and may require environmental remediation. Studies have shown that biosynthesized manganese oxide (BioMnOx) successfully degraded toxic synthetic compounds such as bis-phenol A and diclofenac, thus it has potential for paraquat degradation. In this experiment, P. duplex AARL G060 generated low (9.03 mg/L) and high (42.41 mg/L) concentrations of BioMnOx. The precipitated BioMnOx was observed by scanning electron microscopy (SEM), and the elemental composition was identified as Mn and O by energy-dispersive x-ray spectroscopy (EDS). The potential for BioMnOx to act as a catalyst in the degradation of paraquat was evaluated under three treatments: (1) a negative control (deionized water), (2) living alga with low BioMnOx plus hydrogen peroxide, and (3) living alga with high BioMnOx plus hydrogen peroxide. The results indicate that BioMnOx served as a catalyst in the Fenton-like reaction that could degrade more than 50% of the paraquat within 72 h. A kinetic study indicated that paraquat degradation by Fenton-like reactions using BioMnOx as a catalyst can be described by pseudo-first and pseudo-second order models. The pH level of the BioMnOx catalyst was neutral at the end of the experiment. In conclusion, BioMnOx is a viable and environmentally friendly catalyst to accelerate degradation of paraquat and other toxic chemicals.

Fabrication of an (α-Mn2O3:Co)-decorated CNT highly sensitive screen printed electrode for the optimization and electrochemical determination of cyclobenzaprine hydrochloride using response surface methodology

A new chemically optimized screen-printed electrode modified with a cobalt-doped α-Mn2O3 nanostructure on carbon nanotube paste (α-Mn2O3:Co@CNTs) has been constructed for the recognition of cyclobenzaprine hydrochloride. The prepared paste is based on the incorporation of oxide ion conductors, such as the α-Mn2O3 nanostructure with cobalt and ion pairs (tetraphenyl borate coupled with the drug), as electroactive species in the screen-printed electrode to increase the sensor surface area and decrease electrical resistance. The central composite design is a useful methodology for the estimation and modeling of the exact optimum parameters specifically designed for this process. This is a good way to graphically clarify the relationship between various experimental variables and the slope response. The proposed sensor, α-Mn2O3:Co@CNTs, possesses very good sensitivity and the ability to recognize the drug over the concentration range of 1 × 10-6 to 1 × 10-2 mol L-1 at 25 ± °C with a detection limit of 2.84 × 10-7 mol L-1. It exhibits a reproducible potential and stable linear response for six months at a Nernstian slope of 58.96 ± 0.76 mV per decade. The proposed electrode approach has been successfully applied in the direct determination of the drug in its pure and dosage forms.

Electrochemical (bio) sensors go green

Electrochemical (bio) sensors are now widely acknowledged as a sensitive detection tool for disease diagnosis as well as the detection of numerous species of pharmaceutical, clinical, industrial, food, and environmental origin. The term 'green' demonstrates the development of electrochemical (bio) sensing platforms utilizing biodegradable and sustainable materials. Development of green sensing platforms is one of the most active areas of research minimizing the use of toxic/hazardous reagents and solvent systems, thereby further reducing the production of chemical wastes in sensor fabrication. The present review includes green electrochemical (bio) sensors which are based on firstly, green sensors comprising natural and non-hazardous materials (e.g., paper/clay/zeolites/biowastes), secondly sensors based on nanomaterials synthesized by green methods and lastly sensors constituting green solvents (e.g., ionic liquids/deep eutectic solvents). Electrochemical performances of such green sensors and their benefits such as biodegradability, non-toxicity, sustainability, low-cost, sensitive surfaces, etc. Have been discussed for quantification of various target analytes. Associated challenges, possible solutions, and opportunities towards fabricating green electrochemical sensors and biosensors have been provided in the conclusion section.

Capacitive and Sensing Responses of Biomass Derived Silver Decorated Graphene

A new, easy and green method is utilized for producing silver decorated graphene for its application in sensors and supercapacitors. The biomass-derived silver decorated graphene (AgGr) samples are prepared using an APCVD reactor with varying the process temperature from 600 to 800 °C. The as-synthesized AgGr samples were then characterized by AFM, SEM, Raman spectroscopy, FTIR spectroscopy, XRD, cyclic voltammetry and impedance spectroscopy. The interlayer spacing and I_D/I_G ratio of the AgGr samples varied from 3.6 to 3.7 Å and 0.87 to 1.52, respectively, as the process temperature was raised from 600 to 800 °C. The SEM image shows the distribution of the flower-like structure of Ag flakes in the graphene sheet for the AgGr-800 sample. Also, the greater number of active sites on the surface of AgGr-800 and the presence of a higher number of defects makes it least useful for p-nitrophenol sensing due to the excess opening of the CV curve but has a maximum capacitance of 93.5 Fg⁻¹ in 1 M H₂SO₄. AgGr-600 showed extremely good sensing of p-nitrophenol than the other AgGr samples. Therefore this novel technique can be utilized for the large scale manufacture of various metal decorated graphene samples for their application in different fields.

Synthesis and characterization of Reishi mushroom-mediated green synthesis of silver nanoparticles for the biochemical applications

In recent years, the synthesis of nanoparticles via biological processes has attracted considerable attention. The use of plants and plant extracts is one of the most preferred methods for biological synthesis due to their rich biologically active metabolites. In this study, silver nanoparticles (Ag NPs) were synthesized using reishi mushroom (Ganoderma lucidum) extract. Different analytical techniques including X-ray Photoelectron Spectroscopy (XPS), X-ray diffraction (XRD), transmission electron microscopy (TEM), UV-vis spectroscopy, and Fourier Transform Infrared Spectrophotometer (FTIR) were used for the characterization of Ag NPs. UV-vis spectrum exhibited a broad absorption peak between 400-460 nm which indicates the existence of Ag NPs. TEM images showed Ag NPs are spherical with a diameter range of 15-22 nm. In addition, it is shown that Ag NPs form a face-centered cubic structure according to XRD characterization technique. The antioxidant activity towards to 1-Diphenyl-2-picrylhydrazyl (DPPH) was also studied. The highest DPPH scavenging percentage was recorded as 76.45% at 250 mg/L. The DNA cleavage activity results indicated that the green Ag NPs caused single strain DNA cleavage activity for 30 and 60 min at 50 and 100 mg/L, respectively. The Ag NPs antimicrobial activity was also investigated and results recorded as minimum inhibition concentration (MIC). Ag NPs showed a strong antibacterial effect against gram-positive (S. aureus, E. hirae, B. cereus) and gram-negative (E. coli, P. aeruginosa, L. pneumophila subsp. Pneumophila) bacteria. Furthermore, Ag NPs have also been shown to have a high antifungal effect against C. albicans fungus.

Optimisation of green synthesis of MnO nanoparticles via utilising response surface methodology

This study concerns the optimisation of green synthesis of manganese oxide nanoparticles (MnO NPs) with Dittrichia graveolens (L.) extract via response surface methodology (RSM). Central composite design was used to evaluate the effect of pH, time, and the extract to the metal ratio on the synthesised nanoparticles (NPs). Nine runs were designed to investigate the effect of each parameter while NPs were synthesised under different conditions. Considering the p-values (p-value < 0.05), it is indicated that the extract to the metal ratio was the most effective parameter. The synthesised NPs were characterised using UV-vis. Synthesis of the NPs by polyphenolic compounds of green reducing agent and their stabilisation by curcumin was confirmed by Fourier transform infrared spectra and the surface morphology of the spherical MnO NPs was studied by field-emission scanning electron microscopy and transmission electron microscope techniques. The present researchers claimed the optimal condition as follows: time = 56.7 min, pH = 7.2, and the extract to the metal ratio = 87.9 v/v. MnO NPs at optimum condition were then employed for degradation of industrial dyes and they showed high dye degradation activity against Rhodamine B and light green dye. The average size of the synthesised MnO NPs at optimal condition was claimed to be nearly 38 nm.