Stable Zinc Anodes Enabled by Zincophilic Cu Nanowire Networks

Construction of ultrathin solid electrolyte interface on Zn anode within 1 min for high current operating condition

Organic acid treatment can facilitate the in-situ formation of a solid electrolyte interface (SEI) on Zn foil protecting the anode from corrosion. However, the generation of hydrogen (H2) during this process is inevitable, which is often considered detrimental to getting compact SEI. Herein, a H2 film-assisted method is proposed under concentrated Amino-Trimethylene-Phosphonic-Acid to construct ultrathin and dense SEI within 1 min. Specifically, the (002) crystal planes survive from the etching process of 1 min due to the adhered H2, inducing uniform deposition and enhanced corrosion-resistance. Moreover, the H2 can effectively regulate the reaction rate, leading to ultrathin SEI and initiating a morphology preservation behavior, which has been neglected by the previous reports. The quick-formed SEI has excellent compatibility, low resistance and effective isolation of electrolyte/anode, whose advantages work together with exposed (002) planes to get accustomed to high-current surge, leading to the ZAC1@Zn//ZAC1@Zn consistently cycling over 800 h at 15 mA cm-2 and 15 mAh cm-2, the ZAC1@Zn//Cu preserves high reversibility (CE 99.7 %), and the ZAC1@Zn//MVO exhibits notable capacity retention at 191.7 mAh/g after 1000 cycles.

An optimized impedance matching construction strategy: carbon nanofibers inlaid with Ni nanocrystals by electrospinning for high-performance microwave absorber

With the widespread use of electronic goods, solving electromagnetic pollution has become one of the new challenges. Higher requirements for microwave-absorbing materials (MAM) have emerged to address this issue. The composite of carbon nanofiber (CNF) and magnetic nanoparticles is the material that effectively absorbs microwaves. This paper fabricated Ni/C nanofibers using a combination of electrospinning and high-temperature carbonization. With 50 wt% paraffin wax, Ni/C nanofibers demonstrated optimal microwave absorption capabilities. With a thickness of 3 mm, the minimum RL value can reach -30.6 dB, and the effective absorption bandwidth is 5.96 GHz. By encapsulating Ni nanoparticles in carbon nanofibers, the synergic interaction of dielectric and magnetic losses effectively meets the need for constant attenuation and impedance matching, and effectively improves microwave-absorbing properties. Hence, Ni/C nanofibers are promising for MAM application with excellent MA performance.

Advances of Nanomaterials for High-Efficiency Zn Metal Anodes in Aqueous Zinc-Ion Batteries

Aqueous zinc-ion batteries (AZIBs) have emerged as one of the most promising candidates for next-generation energy storage devices due to their outstanding safety, cost-effectiveness, and environmental friendliness. However, the practical application of zinc metal anodes (ZMAs) faces significant challenges, such as dendrite growth, hydrogen evolution reaction, corrosion, and passivation. Fortunately, the rapid rise of nanomaterials has inspired solutions for addressing these issues associated with ZMAs. Nanomaterials with unique structural features and multifunctionality can be employed to modify ZMAs, effectively enhancing their interfacial stability and cycling reversibility. Herein, an overview of the failure mechanisms of ZMAs is presented, and the latest research progress of nanomaterials in protecting ZMAs is comprehensively summarized, including electrode structures, interfacial layers, electrolytes, and separators. Finally, a brief summary and optimistic perspective are given on the development of nanomaterials for ZMAs. This review provides a valuable reference for the rational design of efficient ZMAs and the promotion of large-scale application of AZIBs.

Rescuing zinc anode-electrolyte interface: mechanisms, theoretical simulations and in situ characterizations

The research interest in aqueous zinc-ion batteries (AZIBs) has been surging due to the advantages of safety, abundance, and high electrochemical performance. However, some technique issues, such as dendrites, hydrogen evolution reaction, and corrosion, severely prohibit the development of AZIBs in practical utilizations. The underlying mechanisms regarding electrochemical performance deterioration and structure degradation are too complex to understand, especially when it comes to zinc metal anode-electrolyte interface. Recently, theoretical simulations and in situ characterizations have played a crucial role in AZIBs and are exploited to guide the research on electrolyte engineering and solid electrolyte interphase. Herein, we present a comprehensive review of the current state of the fundamental mechanisms involved in the zinc plating/stripping process and underscore the importance of theoretical simulations and in situ characterizations in mechanism research. Finally, we summarize the challenges and opportunities for AZIBs in practical applications, especially as a stationary energy storage and conversion device in a smart grid.

Constructing 3D Zincophilic Skeleton in Nitrogen-Doped Carbon Hybrid Fibers for Dendrite-Free Zn Anodes

The Zn dendrite growth and side reactions are two major issues for the practical use of Zn metal anodes (ZMAs). Herein, an N-doped carbon-based hybrid fiber with the 3D porous skeleton and the zincophilic Cu nanoparticles (denoted as Cu@HLCF) is developed for stable ZMAs. The zincophilic Cu particles in the skeleton work as the active sites to facilitate uniform Zn nucleation. Meanwhile, the abundant pores in the framework of the hybrid fibers provide a large space to relieve the structural stress and suppress the dendrite growth. Moreover, the good mechanical characteristics of the hybrid fiber ensure its high potential applications for flexible electronics. Theoretical analysis results disclose the strong interaction between Zn and Cu sites, and experimental results demonstrate the low voltage hysteresis, high reversibility, and dendrite-free behavior of the Cu@HLCF host for Zn plating/stripping. Moreover, the solid-state Zn-ion battery (ZIB) assembled with a Cu@HLCF/Zn anode shows the prominent flexibility, impressively reliability, and outstanding cycling capability. Therefore, this work not only provides a novel design for the efficient and stable Zn metal anode but also promotes the development of flexible power sources for flexible electronics.

Co/C Nanocomposites with Tunable Condensed States Induced by Conformation-Mediated Strategy for Electromagnetic Wave Absorption

The strategic regulation of condensed state structures in multicomponent nanomaterials has emerged as an effective approach for achieving controllable electromagnetic (EM) properties. Herein, a novel conformation-mediated strategy is proposed to manipulate the condensed states of Co and C, as well as their interaction. The conformation of polyvinylpyrrolidone molecules is adjusted using a gradient methanol/water ratio, whereby the coordination dynamic equilibrium effectively governs the deposition of metal-organic framework precursors. This process ultimately influences the combined impact of derived Co and C in the resulting Co/C nanocomposites post-pyrolysis. The experimental results show that the condensed state structure of Co/C nanocomposites transitions from agglomerate state → to biphasic compact state → to loose packing state. Benefiting from the tunable collaboration between interfacial polarization and defects polarization, and the appropriate electrical conductivity, the diphasic compact state of Co/C nanocomposites achieves an effective absorbing bandwidth of 7.12 GHz (2.1 mm) and minimum reflection loss of -32.8 dB. This study highlights the significance of condensed state manipulation in comprehensively regulating the EM wave absorption characteristics of carbon-based magnetic metal nanocomposites, encompassing factors such as conductivity loss, magnetic loss, defect polarization, and interface polarization.

Phase-Field Simulation of a Dynamic Protective Layer for the Inhibition of Dendrite Growth in Zinc Metal Batteries

Metallic zinc (Zn) has been considered one of the most promising anode materials for next-generation aqueous Zn batteries due to its low redox potential and high storage capacity. However, excessive dendrite formation in Zn metal, corrosion, the evolution of hydrogen gas during the cycling process, and the poor Zn-ion (Zn2+) transport from the electrolyte to the electrode limit its practical application. One of the most effective strategies to suppress Zn dendrite growth and promote Zn2+ transport is to introduce suitable protective layers between the Zn metal electrode and the electrolyte. Herein, we mathematically simulated the dynamic interactions between the Zn deposition on the anode and the resulting displacement of a protective layer that covers the anode, the latter of which can simultaneously inhibit Zn dendrite growth and enhance the Zn2+ transport through the interface between the Zn anode and the protective layer. Our simulation results indicate that a protective layer of high Zn2+ diffusivity not only improves the deposition rate of the Zn metal but also prevents dendrite growth by homogenizing the Zn2+ concentration at the anode surface. In addition, it is revealed that the anisotropic Zn2+ diffusivity in the protective layer influences the 2D diffusion of Zn2+. Higher Zn2+ diffusivity perpendicular to the Zn metal surface inhibits dendrite growth, while higher diffusivity parallel to the Zn metal surface promotes dendrite growth. Our work thus provides a fundamental understanding and a design principle for controlling anisotropic Zn2+ diffusion in the protective layer for better suppression of dendrite growth in Zn metal batteries.

Hydrated Eutectic Electrolyte Induced Bilayer Interphase for High-Performance Aqueous Zn-Ion Batteries with 100 °C Wide-Temperature Range

The practical implementation of aqueous zinc-ion batteries (AZIBs) encounters challenges such as dendrite growth, parasitic reactions, and severe decay in battery performance under harsh environments. Here, a novel hydrated eutectic electrolyte (HEE) composed of Zn(ClO4 )2 ·6H2 O, ethylene glycol (EG), and InCl3 solution is introduced to effectively extend the lifespan of AZIBs over a wide temperature range from -50 to 50 °C. Molecular dynamics simulations and spectroscopy analysis demonstrate that the H2 O molecules are confined within the liquid eutectic network through dual-interaction, involving coordination with Zn2+ and hydrogen bonding with EG, thus weakening the activity of free water and extending the electrochemical window. Importantly, cryo-transmission electron microscopy and spectroscopy techniques reveal that HEE in situ forms a zincophobic/zincophilic bilayer interphase by the dissociation-reduction of eutectic molecules. Specifically, the zincophilic interphase reduces the energy barrier for Zn nucleation, promoting uniform Zn deposition, while the zincophobic interphase prevents active water from contacting the Zn surface, thus inhibiting the side reactions. Furthermore, the relationships between the structural evolution of the liquid eutectic network and interfacial chemistry at electrode/electrolyte interphase are further discussed in this work. The scalability of this design strategy can bring benefits to AZIBs operating over a wide temperature range.

Synergistically Stabilizing Zinc Anodes by Molybdenum Dioxide Coating and Tween 80 Electrolyte Additive for High-Performance Aqueous Zinc-Ion Batteries

Recently, aqueous zinc-ion batteries (ZIBs) have become increasingly attractive as grid-scale energy storage solutions due to their safety, low cost, and environmental friendliness. However, severe dendrite growth, self-corrosion, hydrogen evolution, and irreversible side reactions occurring at Zn anodes often cause poor cyclability of ZIBs. This work develops a synergistic strategy to stabilize the Zn anode by introducing a molybdenum dioxide coating layer on Zn (MoO2@Zn) and Tween 80 as an electrolyte additive. Due to the redox capability and high electrical conductivity of MoO2, the coating layer can not only homogenize the surface electric field but also accommodate the Zn2+ concentration field in the vicinity of the Zn anode, thereby regulating Zn2+ ion distribution and inhibiting side reactions. MoO2 coating can also significantly enhance surface hydrophilicity to improve the wetting of electrolyte on the Zn electrode. Meanwhile, Tween 80, a surfactant additive, acts as a corrosion inhibitor, preventing Zn corrosion and regulating Zn2+ ion migration. Their combination can synergistically work to reduce the desolvation energy of hydrated Zn ions and stabilize the Zn anodes. Therefore, the symmetric cells of MoO2@Zn∥MoO2@Zn with optimal 1 mM Tween 80 additive in 1 M ZnSO4 achieve exceptional cyclability over 6000 h at 1 mA cm-2 and stability (>700 h) even at a high current density (5 mA cm-2). When coupling with the VO2 cathode, the full cell of MoO2@Zn∥VO2 shows a higher capacity retention (82.4%) compared to Zn∥VO2 (57.3%) after 1000 cycles at 5 A g-1. This study suggests a synergistic strategy of combining surface modification and electrolyte engineering to design high-performance ZIBs.

Recent advances in electrospinning nanofiber materials for aqueous zinc ion batteries

Aqueous zinc ion batteries (AZIBs) are regarded as one of the most promising large-scale energy storage systems because of their considerable energy density and intrinsic safety. Nonetheless, the severe dendrite growth of the Zn anode, the serious degradation of the cathode, and the boundedness of separators restrict the application of AZIBs. Fortunately, electrospinning nanofibers demonstrate huge potential and bright prospects in constructing AZIBs with excellent electrochemical performance due to their controllable nanostructure, high conductivity, and large specific surface area (SSA). In this review, we first briefly introduce the principles and processing of the electrospinning technique and the structure design of electrospun fibers in AZIBs. Then, we summarize the recent advances of electrospinning nanofibers in AZIBs, including the cathodes, anodes, and separators, highlighting the nanofibers' working mechanism and the correlations between electrode structure and performance. Finally, based on insightful understanding, the prospects of electrospun fibers for high-performance AZIBs are also presented.

An Electrochemical Perspective of Aqueous Zinc Metal Anode

Based on the attributes of nonflammability, environmental benignity, and cost-effectiveness of aqueous electrolytes, as well as the favorable compatibility of zinc metal with them, aqueous zinc ions batteries (AZIBs) become the leading energy storage candidate to meet the requirements of safety and low cost. Yet, aqueous electrolytes, acting as a double-edged sword, also play a negative role by directly or indirectly causing various parasitic reactions at the zinc anode side. These reactions include hydrogen evolution reaction, passivation, and dendrites, resulting in poor Coulombic efficiency and short lifespan of AZIBs. A comprehensive review of aqueous electrolytes chemistry, zinc chemistry, mechanism and chemistry of parasitic reactions, and their relationship is lacking. Moreover, the understanding of strategies for suppressing parasitic reactions from an electrochemical perspective is not profound enough. In this review, firstly, the chemistry of electrolytes, zinc anodes, and parasitic reactions and their relationship in AZIBs are deeply disclosed. Subsequently, the strategies for suppressing parasitic reactions from the perspective of enhancing the inherent thermodynamic stability of electrolytes and anodes, and lowering the dynamics of parasitic reactions at Zn/electrolyte interfaces are reviewed. Lastly, the perspectives on the future development direction of aqueous electrolytes, zinc anodes, and Zn/electrolyte interfaces are presented.

Strategies for Optimizing the Zn Anode/Electrolyte Interfaces Toward Stable Zn-Based Batteries

Aqueous rechargeable Zn-ion batteries (ARZIBs) have attracted extensive attention because of the advantages of high energy density, high safety, and low cost. However, the commercialization of ARZIBs is still challenging, mainly because of the low efficiency of Zn anodes. Several undesirable reactions (e.g., Zn dendrite and byproduct formation) always occur at the Zn anode/electrolyte interfaces, resulting in low Coulombic efficiency and rapid decay of ARZIBs. Motivated by the great interest in addressing these issues, various optimization strategies and related mechanisms have been proposed to stabilize the Zn anode-electrolyte interfaces and enlengthen the cycling lifespan of ARZIBs. Therefore, considering the rapid development of this field, updating the optimization strategies in a timely manner and understanding their protection mechanisms are highly necessary. This review provides a brief overview of the Zn anode/electrolyte interfaces from the fundamentals and challenges of Zn anode chemistry to related optimization strategies and perspectives. Specifically, these strategies are systematically summarized and classified, while several representative works are presented to illustrate the effect and corresponding mechanism in detail. Finally, future challenges and research directions for the Zn anode/electrolyte interfaces are comprehensively clarified, providing guidelines for accurate evaluation of the interfaces and further fostering the development of ARZIBs.

Revealing the missing puzzle piece of concentration in regulating Zn electrodeposition

Despite achievements in suppressing dendrites and regulating Zn crystal growth, secondary aqueous Zn batteries are still rare in the market. Existing strategies mainly focus on electrode modification and electrolyte optimization, while the essential role of ion concentration in liquid-to-solid electrodeposition is neglected for a long time. Herein, the mechanism of concentration regulation in Zn electrodeposition is investigated in depth by combining electrochemical tests, post hoc characterization, and multiscale simulations. First, initial Zn electrodeposition is thermodynamically controlled epitaxial growth, whereas with the rapid depletion of ions, the concentration overpotential transcends the thermodynamic influence to kinetic control. Then, the evolution of the morphology from 2D sheets to 1D whiskers due to the concentration change is insightfully revealed by the morphological characterization and phase-field modeling. Furthermore, the depth of discharge (DOD) results in large concentration differences at the electrode-electrolyte interface, with a mild concentration distribution at lower DOD generating (002) crystal plane 2D sheets and a heavily varied concentration distribution at higher DOD yielding arbitrarily oriented 3D blocks. As a proof of concept, relaxation is introduced into two systems to homogenize the concentration distribution, revalidating the essential role of concentration in regulating electrodeposition, and two vital factors affecting the relaxation time, i.e., current density and electrode distance, are deeply investigated, demonstrating that the relaxation time is positively related to both and is more sensitive to the electrode distance. This work contributes to reacquainting aqueous batteries undergoing phase transitions and reveals a missing piece of the puzzle in regulating Zn electrodeposition.

Building Ion-Conductive Supramolecular Elastomeric Protective Layer via Dynamic Hard Domain Design for Stable Zinc Metal Anodes

The instability of zinc metal anode caused by zinc dendrite growth and severe parasitic reactions has significantly restricted the extensive application of rechargeable aqueous zinc-ion batteries (RAZBs). Herein, based on the strategy of dynamic hard domains, we develop an ion-conductive supramolecular elastomer consisting of Zn salts and the polyurethane-urea-polypropylene glycol polymer skeleton. This elastomer combines high mechanical strength, high ionic conductivity, decent hydrophobicity, and high adhesion to stabilize the electrode-electrolyte interface. In the elastomer system, this elastomer can dynamically adapt to the volume changes of Zn anodes during repeated zinc plating/stripping processes through the reversible dissociation/reassociation of hierarchical hydrogen bonds (H-bonds) formed by the polar groups of urea and urethane moieties. Meanwhile, the coordination of Zn2+ with soft polypropylene glycol (PPG) segments contributes to fast ion transport. This hydrophobic elastomer can also effectively inhibit water-induced corrosion by shielding the active Zn metal from the aqueous electrolyte. Based on the above synergies, the surface-modified anode shows excellent cycling stability above 550 h at a high current density of 5 mA cm-2 and a capacity of 2.5 mAh cm-2. Moreover, the assembled Zn//MnO2 full cell also displayed an enhanced electrochemical performance. This work provides inspiration for the design of solid electrolyte interphase (SEI) layers in aqueous battery chemistry to accelerate the application of RAZBs.

Lotus Effect Inspired Hydrophobic Strategy for Stable Zn Metal Anodes

Zn-ion batteries (ZIBs) have long suffered from the unstable Zn metal anode, which faces numerous challenges concerning dendrite growth, corrosion, and hydrogen evolution reaction. The absence of H2 O adsorption control techniques has become a bottleneck for the further development of ZIBs. Using the stearic acid (SA)-modified Cu@Zn (SA-Cu@Zn) anode as an example, this work illustrates how the lotus effect controls the H2 O adsorption energy on the Zn metal anode. In situ integrated Cu nanorods arrays and hydrophobic long-chain alkyl groups are constructed, which provide zincophilic ordered channels and hydrophobic property. Consequently, the SA-Cu@Zn anode exhibits long-term cycling stability over 2000 h and high average Coulombic efficiency (CE) of 99.83% at 1 mA cm-2 for 1 mAh cm-2 , which improves the electrochemical performance of the Zn||V2 O5 full cell. Density functional theory (DFT) calculations combined with water contact angle (CA) measurements demonstrate that the SA-Cu@Zn exhibits larger water CA and weaker H2 O adsorption than Zn. Moreover, the presence of Cu ensures the selective adsorption of Zn on the SA-Cu@Zn anode, well explaining how the excellent reversibility is achieved. This work demonstrates the effectiveness of the lotus effect on controllable H2 O adsorption and Zn deposition mechanism, offering a universal strategy for achieving stable ZIB anodes.

Regulated Zn Plating and Stripping by a Multifunctional Polymer-Alloy Interphase Layer for Stable Zn Metal Anode

Metallic zinc electrode with a high theoretical capacity of 820 mAh g-1 is highly considered as a promising candidate for next-generation rechargeable batteries. However, the unavoidable hydrogen evolution, uncontrolled dendrite growth, and severe passivation reaction badly hinder its practical implementations. Herein, a robust polymer-alloy artificial protective layer is designed to realize dendrite-free Zn metal anode by the integration of zincophilic SnSb nanoparticles with Nafion. In comparison to the bare Zn electrode, the Nafion-SnSb coated Zn (NFSS@Zn) electrode exhibits lower nucleation energy barrier, more uniform electric field distribution and stronger anti-corrosion capability, thus availably suppressing the Zn dendrite growth and interfacial side reactions. As a consequence, the NFSS@Zn electrode exhibits a long cycle life over 1500 h at 1 mA cm-2 with an ultra-low voltage hysteresis (25 mV). Meanwhile, when paired with a MnO2 cathode, the as-prepared full cell also demonstrates stable performance for 1000 cycles at 3 A g-1 . This work provides an inspired approach to boost the performance of Zn anodes.

Chelate-Capped Nano-AgZn3 Dual Interphase Remodeling the Local Environment for Reversible Dendrite-Free Zinc Anode

Rechargeable aqueous zinc-ion batteries (AZIBs) are among the most promising candidates for next-generation energy-storage devices. However, the large voltage polarisation and infamous dendrite growth hinder the practical application of AZIBs owing to their complex interfacial electrochemical environment. In this study, a hydrophobic zinc chelate-capped nano-silver (HZC-Ag) dual interphase is fabricated on the zinc anode surface using an emulsion-replacement strategy. The multifunctional HZC-Ag layer remodels the local electrochemical environment by facilitating the pre-enrichment and de-solvation of zinc ions and inducing homogeneous zinc nucleation, thus resulting in reversible dendrite-free zinc anodes. The zinc deposition mechanism on the HZC-Ag interphase is elucidated by density functional theory (DFT) calculations, dual-field simulations, and in situ synchrotron X-ray radiation imaging. The HZC-Ag@Zn anode exhibited superior dendrite-free zinc stripping/plating performance and an excellent lifespan of >2000 h with ultra-low polarisation of ≈17 mV at 0.5 mA cm-2 . Full cells coupled with a MnO2 cathode showed significant self-discharge inhibition, excellent rate performance, and improved cycling stability for >1000 cycles. Therefore, this multifunctional dual interphase may contribute to the design and development of dendrite-free anodes for high-performance aqueous metal-based batteries.

Zinc-Bromine Rechargeable Batteries: From Device Configuration, Electrochemistry, Material to Performance Evaluation

Zinc-bromine rechargeable batteries (ZBRBs) are one of the most powerful candidates for next-generation energy storage due to their potentially lower material cost, deep discharge capability, non-flammable electrolytes, relatively long lifetime and good reversibility. However, many opportunities remain to improve the efficiency and stability of these batteries for long-life operation. Here, we discuss the device configurations, working mechanisms and performance evaluation of ZBRBs. Both non-flow (static) and flow-type cells are highlighted in detail in this review. The fundamental electrochemical aspects, including the key challenges and promising solutions, are discussed, with particular attention paid to zinc and bromine half-cells, as their performance plays a critical role in determining the electrochemical performance of the battery system. The following sections examine the key performance metrics of ZBRBs and assessment methods using various ex situ and in situ/operando techniques. The review concludes with insights into future developments and prospects for high-performance ZBRBs.

Rational Design of Zincophilic Ag/Permselective PEDOT:PSS Heterogeneous Interfaces for High-Rate Zinc Electrodeposition

Designing artificial interface is a promising strategy to protect Zn metal anode but achieving long Zn plating/stripping lifespans and efficient nucleation/deposition kinetics, particularly at high current densities, remains a challenge. In this study, a permselective zincophilic heterogeneous interface consisting of metallic Ag layer and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS) is designed via a simple chemical displacement and drop casting process. The artificial interface plays a multifunctional role in inhibiting dendrite growth/side reactions by reducing the nucleation barrier through a large number of Zn nucleation sites offered by the bottom Ag layer, homogenizing electrical field/Zn2+ flux and shielding SO4 2- migration via the compact, conducting, and Zn2+ -permselective PEDOT:PSS supporting layer. Moreover, the heterogeneous interface demonstrates enhanced structural integrity owing to the binder effect of PEDOT:PSS. As a result, the modified Zn anode demonstrates a cyclic lifespan of 200 h and a reduced voltage hysteresis of ≈150 mV at 20 mA cm-2 /5 mAh cm-2 , far surpassing its counterparts. Moreover, the protected Zn anode allows the LiMn2 O4 -based full cells with remarkable rate and cycling performance. These findings provide new insight into the design of an efficient artificial interface for highly reversible and high-rate Zn electrodeposition.

F-Doped Carbon Nanoparticles-Based Nucleation Assistance for Fast and Uniform Three-Dimensional Zn Deposition

Aqueous Zn metal-based batteries have considerable potential as energy storage system; however, their application is extremely limited by dendrite development and poor reversibility. In this study, to overcome both challenges, F-doped carbon nanoparticles (FCNPs) are uniformly constructed on substrates (Ti, Zn, Cu, and steel) by a plasma-assisted surface modification, which endows reversible and uniform deposition of Zn metal. FCNPs with high surface charge density act as nucleation assistors and form numerous homogenous Zn nucleation sites toward Zn 3D growth, which improves Zn plating kinetic and results in uniform Zn deposition. Furthermore, the ZnF₂  solid electrolyte interface generated during cycling contributes to rapid mass transfer and enhances Zn reversibility, but also suppresses the side reaction. Accordingly, the half-cell of P-Ti coupled with Zn exhibits an average Coulombic efficiency of 99.47% with 500 cycles. The symmetric cell of the P-Zn anode presents a lifespan of over 1500 h at the current density of 5 mA cm^-2 . Notably, the cell works for 100 h at 50 mA cm^-2 . It is believed that this ingenious surface modification broadens revolutionary methods for uniform metallic deposition, as well as the dendrite-free rechargeable batteries system.

Functional Ultrathin Separators Proactively Stabilizing Zinc Anodes for Zinc-Based Energy Storage

Ultrathin separators are indispensable to high-energy-density zinc-ion batteries (ZIBs), but their easy failure caused by zinc dendrites poses a great challenge. Herein, 23 µm-thick functional ultrathin separators (FUSs), realizing superb electrochemical stability of zinc anodes and outstanding long-term durability of ultrathin separators, are reported. In the FUSs, an ultrathin but mechanically strong nanoporous membrane substrate benefits fast and flux-homogenized Zn²⁺ transport, while a metal-organic framework (MOF)-derived C/Cu nanocomposite decoration layer provides rich low-barrier zinc nucleation sites, thereby synergistically stabilizing zinc anodes to inhibit zinc dendrites and dendrite-caused separator failure. Investigation of the zinc affinity of the MOF-derived C/Cu nanocomposites unravels the high zincophilicity of heteroatom-containing C/Cu interfaces. Zinc anodes coupled with the FUSs present superior electrochemical stability, whose operation lifetime exceeds 2000 h at 1 mA cm^-2 and 600 h at 10 mA cm^-2 , 40-50 times longer than that of the zinc anodes using glass-fiber separators. The reliability of the FUSs in ZIBs and zinc-ion hybrid supercapacitors is also validated. This work proposes a new strategy to stabilize zinc anodes and provides theoretical guidance in developing ultrathin separators for high-energy-density zinc-based energy storage.

Surface Control Behavior toward Crystal Regulation and Anticorrosion Capacity for Zinc Metal Anodes

The commercial application of high-safety aqueous zinc (Zn) secondary batteries is hindered by the poor cycling life of Zn metal anodes. Here we propose a dendrite growth and hydrogen evolution corrosion reaction mechanism from the binding energy of the deposited crystal plane on the Zn surface and the adsorption energy of H₂O molecules on different crystal planes as well as the binding energy of H₂O molecules with Zn²⁺ ions. The biomass-based alkyl polyglucoside (APG) surfactant is adopted as an electrolyte additive of 0.15% to regulate the preferential growth of a parallel Zn(002) plane and enhance the anticorrosion ability of Zn metal anodes. The robust binding and adsorption energies of APG with Zn²⁺ ions in the aqueous electrolyte and the Zn(002) plane on Zn surface generate a synergistic effect to increase the concentration of Zn²⁺ ions on the APG-adsorbed Zn(002) plane, endowing the continuous growth of the preferential parallel Zn(002) plane and the excellent anticorrosion capacity. Accordingly, the long-term cycle stability of 4000 h can be achieved for Zn anodes with APG additives, which is better than that with pure ZnSO₄ electrolyte. With the addition of APG in the anolyte electrolyte, Zn-I₂ full cells display excellent cycling performance (70 mAh g^-1 after 20000 cycles) as compared with that without APG additives.

Realizing Textured Zinc Metal Anodes through Regulating Electrodeposition Current for Aqueous Zinc Batteries

Crystallography modulation of zinc (Zn) metal anode is promising to promote Zn reversibility in aqueous electrolytes, but efficiently constructing Zn with specific crystallographic texture remains challenging. Herein, we report a current-controlled electrodeposition strategy to texture the Zn electrodeposits in conventional aqueous electrolytes. Using the electrolytic cell with low-cost Zn(CH₃ COO)₂ electrolyte and Cu substrate as a model system, the texture of as-deposited Zn gradually transforms from (101) to (002) crystal plane as increasing the current density from 20 to 80 mA cm^-2 . Moreover, the high current accelerates the Zn nucleation rate with abundant nuclei, enabling uniform deposition. The (002) texture permits stronger resistance to dendrite growth and interfacial side reactions than the (101) texture. The resultant (002)-textured Zn electrode achieves deep cycling stability and supports the stable operation of full batteries with conventional V/Mn-based oxide cathodes.

Quasi-Solid Electrolyte Interphase Boosting Charge and Mass Transfer for Dendrite-Free Zinc Battery

The practical applications of zinc metal batteries are plagued by the dendritic propagation of its metal anodes due to the limited transfer rate of charge and mass at the electrode/electrolyte interphase. To enhance the reversibility of Zn metal, a quasi-solid interphase composed by defective metal-organic framework (MOF) nanoparticles (D-UiO-66) and two kinds of zinc salts electrolytes is fabricated on the Zn surface served as a zinc ions reservoir. Particularly, anions in the aqueous electrolytes could be spontaneously anchored onto the Lewis acidic sites in defective MOF channels. With the synergistic effect between the MOF channels and the anchored anions, Zn2+ transport is prompted significantly. Simultaneously, such quasi-solid interphase boost charge and mass transfer of Zn2+, leading to a high zinc transference number, good ionic conductivity, and high Zn2+ concentration near the anode, which mitigates Zn dendrite growth obviously. Encouragingly, unprecedented average coulombic efficiency of 99.8% is achieved in the Zn||Cu cell with the proposed quasi-solid interphase. The cycling performance of D-UiO-66@Zn||MnO2 (~ 92.9% capacity retention after 2000 cycles) and D-UiO-66@Zn||NH4V4O10 (~ 84.0% capacity retention after 800 cycles) prove the feasibility of the quasi-solid interphase.

Decreasing Water Activity Using the Tetrahydrofuran Electrolyte Additive for Highly Reversible Aqueous Zinc Metal Batteries

Aqueous zinc metal batteries show great promise in large-scale energy storage. However, the decomposition of water molecules leads to severe side reactions, resulting in the limited lifespan of Zn batteries. Here, the tetrahydrofuran (THF) additive was introduced into the zinc sulfate (ZnSO₄) electrolyte to reduce water activity by modulating the solvation structure of the Zn hydration layer. The THF molecule can play as a proton acceptor to form hydrogen bonds with water molecules, which can prevent water-induced undesired reactions. Thus, in an optimal 2 M ZnSO₄/THF (5% by volume) electrolyte, the hydrogen evolution reaction and byproduct precipitation can be suppressed, which greatly improves the cycling stability and Coulombic efficiency of reversible Zn plating/stripping. The Zn symmetrical cells exhibit ultralong working cycles with a wide range of current density and capacity. The THF additive also enables a high Coulombic efficiency in the Zn||Cu cell with an average value of 99.59% over 400 cycles and a high reversible capacity with a capacity retention of 97.56% after 250 cycles in the Zn||MnO₂ full cells. This work offers an effective strategy with high scalability and low cost for the protection of the Zn metal electrodes in aqueous rechargeable batteries.

Constructing robust heterostructured interface for anode-free zinc batteries with ultrahigh capacities

The development of Zn-free anodes to inhibit Zn dendrite formation and modulate high-capacity Zn batteries is highly applauded yet very challenging. Here, we design a robust two-dimensional antimony/antimony-zinc alloy heterostructured interface to regulate Zn plating. Benefiting from the stronger adsorption and homogeneous electric field distribution of the Sb/Sb₂Zn₃-heterostructured interface in Zn plating, the Zn anode enables an ultrahigh areal capacity of 200 mAh cm^-2 with an overpotential of 112 mV and a Coulombic efficiency of 98.5%. An anode-free Zn-Br₂ battery using the Sb/Sb₂Zn₃-heterostructured interface@Cu anode shows an attractive energy density of 274 Wh kg^-1 with a practical pouch cell energy density of 62 Wh kg^-1. The scaled-up Zn-Br₂ battery in a capacity of 500 mAh exhibits over 400 stable cycles. Further, the Zn-Br₂ battery module in an energy of 9 Wh (6 V, 1.5 Ah) is integrated with a photovoltaic panel to demonstrate the practical renewable energy storage capabilities. Our superior anode-free Zn batteries enabled by the heterostructured interface enlighten an arena towards large-scale energy storage applications.

Anode optimization strategies for aqueous zinc-ion batteries

Zinc-ion batteries (ZIBs) have received much research attention due to their advantages of safety, non-toxicity, simple manufacture, and element abundance. Nevertheless, serious problems still remain for their anodes, such as dendrite development, corrosion, passivation, and the parasitic hydrogen evolution reaction due to their unique aqueous electrolyte system constituting the main issues that must be addressed, which are blocking the further advancement of anodes for Zn-ion batteries. Herein, we conduct an in-depth analysis of the problems that exist for the zinc anode, summarize the main failure types and mechanisms of the zinc anode, and review the main modification strategies for the anode from the three aspects of the electrolyte, anode surface, and anode host. Furthermore, we also shed light on further modification and optimization strategies for the zinc anode, which provide directions for the future development of anodes for zinc-ion batteries.

Iodine Promoted Ultralow Zn Nucleation Overpotential and Zn-Rich Cathode for Low-Cost, Fast-Production and High-Energy Density Anode-Free Zn-Iodine Batteries

The anode-free design is a promising strategy to increase the energy density of aqueous Zn metal batteries (AZMBs). However, the scarcity of Zn-rich cathodes and the rapid loss of limited Zn greatly hinder their commercial applications. To address these issues, a novel anode-free Zn-iodine battery (AFZIB) was designed via a simple, low-cost and scalable approach. Iodine plays bifunctional roles in improving the AFZIB overall performance: enabling high-performance Zn-rich cathode and modulating Zn deposition behavior. On the cathode side, the ZnI₂ serves as Zn-rich cathode material. The graphene/polyvinyl pyrrolidone heterostructure was employed as an efficient host for ZnI₂ to enhance electron conductivity and suppress the shuttle effect of iodine species. On the anode side, trace I₃^- additive in the electrolyte creates surface reconstruction on the commercial Cu foil. The in situ formed zincophilic Cu nanocluster allows ultralow-overpotential and uniform Zn deposition and superior reversibility (average coulombic efficiency > 99.91% over 7,000 cycles). Based on such a configuration, AFZIB exhibits significantly increased energy density (162 Wh kg^-1) and durable cycle stability (63.8% capacity retention after 200 cycles) under practical application conditions. Considering the low cost and simple preparation methods of the electrode materials, this work paves the way for the practical application of AZMBs.

Inhibition of Zinc Dendrites Realized by a β-P(VDF-TrFE) Nanofiber Layer in Aqueous Zn-Ion Batteries

Uncontrollable Zn dendrite formations and parasitic side reactions on Zn electrodes induce poor cycling stability and safety issues, preventing the large-scale commercialization of Zn-ion batteries. Herein, to achieve uniform Zn deposition and suppress side reactions, an electrospun ferroelectric poly(vinylidene fluoride-co-trifluoroethylene) copolymer, a P(VDF-TrFE) nanofiber layer, is introduced as an artificial solid-electrolyte interface on a Cu substrate acting as a current collector. The aligned molecular structure of β-P(VDF-TrFE) can effectively suppress localized current density on the Cu surface, lead to uniform Zn deposition, and suppress side reactions by preventing direct contact between electrodes and aqueous electrolytes. The half-cell configuration formed by the newly fabricated electrode can achieve an average coulombic efficiency of 99.2% over 300 cycles without short-circuiting at a current density of 1 mA cm^-2 and areal capacity of 1 mAh cm^-2. Stable cycling stability is also maintained for 200 cycles at a current density of 0.5 A g^-1 in a full-cell test using MnO₂ as a cathode.

Biodegradable Gel Electrolyte Suppressing Water-Induced Issues for Long-Life Zinc Metal Anodes

Owing to the inherent properties of aqueous electrolytes, aqueous zinc-ion batteries are considered to be a promising energy storage system. Unfortunately, the water-induced issues, such as hydrogen evolution and corrosion reaction, inevitably occur on the Zn anode surface during cycling, which leads to poor electrochemical performance. The gel polymer electrolyte would reduce the parasitic reactions associated with water. However, the nondegradable polymer is harmful to the environment. Herein, with the aim to alleviate the serious issues derived from water and environmental problems, a biodegradable gum arabic has been proposed to serve as a hydrogel electrolyte for aqueous zinc-ion batteries. The electrochemical activity of water could be reduced by the hydrogen-bond network between the gum arabic and water. Thus, the corrosion and hydrogen evolution reaction (HER) can be restrained by employing the prepared gel electrolyte. Evidenced by the online mass spectrometry, it is found that the less produced H₂ is detected in the biodegradable gel electrolyte-based Zn||Zn symmetric cell during the processes of Zn plating/stripping, showing the inhibited HER. Moreover, the by-product on the Zn anode is barely observed during cycling when using the obtained gel electrolyte. Uniform zinc-ion distribution can be achieved to mitigate Zn dendrite growth in the gel electrolyte. Therefore, the Zn||Zn symmetric cell based on the gel electrolyte exhibits a long lifespan of more than 1300 h, which is longer than that in the aqueous electrolyte. Moreover, the Zn||LiFePO₄ hybrid ion battery based on the gel electrolyte shows improved capacity retention by suppressing the reactions related to water.

Stable Zinc Anodes Enabled by a Zincophilic Polyanionic Hydrogel Layer

The practical application of the Zn-metal anode for aqueous batteries is greatly restricted by catastrophic dendrite growth, intricate hydrogen evolution, and parasitic surface passivation. Herein, a polyanionic hydrogel film is introduced as a protective layer on the Zn anode with the assistance of a silane coupling agent (denoted as Zn-SHn). The hydrogel framework with zincophilic -SO₃ ^- functional groups uniformizes the zinc ions flux and transport. Furthermore, such a hydrogel layer chemically bonded on the Zn surface possesses an anti-catalysis effect, which effectively suppresses both the hydrogen evolution reaction and formation of Zn dendrites. As a result, stable and reversible Zn stripping/plating at various currents and capacities is achieved. A full cell by pairing the Zn-SHn anode with a NaV₃ O₈ ·1.5 H₂ O cathode shows a capacity of around 176 mAh g^-1 with a retention around 67% over 4000 cycles at 10 A g^-1 . This polyanionic hydrogel film protection strategy paves a new way for future Zn-anode design and safe aqueous batteries construction.

Surface-Alloyed Nanoporous Zinc as Reversible and Stable Anodes for High-Performance Aqueous Zinc-Ion Battery

Metallic zinc (Zn) is one of the most attractive multivalent-metal anode materials in post-lithium batteries because of its high abundance, low cost and high theoretical capacity. However, it usually suffers from large voltage polarization, low Coulombic efficiency and high propensity for dendritic failure during Zn stripping/plating, hindering the practical application in aqueous rechargeable zinc-metal batteries (AR-ZMBs). Here we demonstrate that anionic surfactant-assisted in situ surface alloying of Cu and Zn remarkably improves Zn reversibility of 3D nanoporous Zn electrodes for potential use as high-performance AR-ZMB anode materials. As a result of the zincophilic Zn_xCu_y alloy shell guiding uniform Zn deposition with a zero nucleation overpotential and facilitating Zn stripping via the Zn_xCu_y/Zn galvanic couples, the self-supported nanoporous Zn_xCu_y/Zn electrodes exhibit superior dendrite-free Zn stripping/plating behaviors in ambient aqueous electrolyte, with ultralow polarizations under current densities up to 50 mA cm^‒2, exceptional stability for 1900 h and high Zn utilization. This enables AR-ZMB full cells constructed with nanoporous Zn_xCu_y/Zn anode and K_zMnO₂ cathode to achieve specific energy of as high as ~ 430 Wh kg^‒1 with ~ 99.8% Coulombic efficiency, and retain ~ 86% after long-term cycles for > 700 h.

Natural Polysaccharide Strengthened Hydrogel Electrolyte and Biopolymer Derived Carbon for Durable Aqueous Zinc Ion Storage

Aqueous zinc-ion hybrid supercapacitors (ZHSCs) represent one of the current research subjects because of their flame retardancy, ease of manufacturing, and exceptional roundtrip efficiency. With the evolution into real useful energy storage cells, the bottleneck factors of the corrosion and dendrite growth problems must be properly resolved for largely boosting their cycling life and energy efficiency. Herein, a natural polysaccharide strengthened hydrogel electrolyte (denoted as PAAm/agar/Zn(CF3SO3)2) was engineered by designing an asymmetric dual network of covalently cross-linked polyacrylamide (denoted as PAAm) and physically cross-linked loose polysaccharide (e.g., agar) followed by intense uptake of Zn(CF3SO3)2 aqueous electrolyte. In this polymeric matrix, the PAAm chains are responsible for constructing the soft domains to immobilize the water molecules, and the agar component boosts the mechanical performance (by using its inherent reversible sacrificial bonds) and favors the electrolyte ion transport. Due to these reasons, the as-designed hydrogel electrolyte effectively inhibits the zinc dendrite growth, realizes the uniform Zn deposition, and affords a satisfactory ionic conductivity of 1.55 S m-1, excellent tensile strength (78.9 kPa at 507.7% stretchable), and high compression strength (118.0 kPa at 60.0% strain). Additionally, a biopolymer-derived N-doped carbon microsphere cathode material with a highly interconnected porous carbonaceous network (denoted as NC) was also synthesized, which delivers a high capacity of 92.8 mAh g-1, along with superb rate capability and long duration cycling lifespan (95.4% retention for 10000 cycles) in the aqueous Zn//NC ZHSC. More notably, with integrated merits of the PAAm/agar/Zn(CF3SO3)2 hydrogel electrolyte and NC, the as-built quasi-solid-state ZHSC achieves a high specific capacity of 73.4 mAh g-1 and superior energy density of 61.3 Wh kg-1 together with excellent cycling stability for 10000 cycles. This work demonstrated favorable practicability in the structural design of the hydrogel electrolytes and electrode materials for advanced ZHSC applications.

Establishing Thermal Infusion Method for Stable Zinc Metal Anodes in Aqueous Zinc-Ion Batteries

Metallic zinc (Zn) having low cost, high capacity, environmentally friendly features is considered to be an attractive anode material for aqueous energy storage devices. However, dendritic growth and severe side reactions restrict the development of Zn-metal anodes. Numerous 3D hosts are extensively explored to settle these issues, whereas the accessible prestoring of Zn metal into structured electrodes is challenging. Here, a thermal infusion strategy is first reported to create a stable composite Zn-based anode. Upon this melting-wetting-cooling process, the metallic Zn is densely and firmly encapsulated in the 3D skeleton, efficiently inhibiting the dendritic growth. Meanwhile, through in/ex situ tests, the formation of ZnO layer on the metallic Zn surface inhibits the hydrogen evolution reactions (1.8 mmol h^-1 cm^-2 ) and passivation during cycling. Consequently, the electrode enables a long-cycling life of over 1000 cycles at 10 mA cm^-2 in a symmetrical cell. The pouch cells pairing this novel anode and LiMn₂ O₄ cathode maintain over 94 mAh g^-1 capacity retention after 300 cycles. This research presents an innovative Zn anode structure and extendable prestoring metallic Zn method for aqueous Zn-ion batteries.

Sustainable Phytic Acid-Zinc Anticorrosion Interface for Highly Reversible Zinc Metal Anodes

Although aqueous zinc-ion batteries (AZIBs) promise high capacity, low cost, and environmental friendliness, the Zn metal anode suffers from limited reversibility and unsatisfied lifespan arising from severe dendritic growth and inevitable interfacial corrosion. In this regard, constructing the artificial protective interfacial layer on the Zn metal foil has been recognized as an effective strategy to realize durable AZIBs. Inspired by the phytic acid (PA) anticorrosion conversion coating layer for industrial metal protection, herein, we designed a dense and conformal PA-Zn complex layer on the Zn anodes through a feasible, rapid wet-chemistry chelating reaction. The in situ formed uniform PA-Zn coating layer on the surface of Zn anodes can serve as a protective layer inhibiting corrosion reaction. More importantly, the desolvation energy of Zn²⁺ is effectively reduced by the PA-Zn layer, which gives rise to enhanced kinetics of Zn plating/stripping for uniform Zn deposition. Consequently, the PA-Zn metal anode delivered a low overpotential of 36 mV and a long lifespan over 1400 h at 2 mA cm^-2 with a capacity of 1 mA h cm^-2. The feasibility of PA-Zn anodes is also verified in the as-constructed PANI@V₂O₅||Zn full cells. This work paves the way for designing a multifunctional interface layer on Zn metal and promotes the development of high-performance AZIBs.

A facile method for pre-insertion of cations and structural water in preparing durable zinc storage vanadate cathodes

For improving the overall energy storage performance of aqueous zinc-ion battery (ZIB) systems, it is important to identify new cathode materials with superior characteristics. Along these lines, in this work,...