3D bioprinting for cell culture and tissue fabrication

DNA adductomics aided rapid screening of genotoxic impurities using nucleosides and 3D bioprinted human liver organoids

Current genotoxicity assessment methods are mainly employed to verify the genotoxic safety of drugs, but do not allow for rapid screening of specific genotoxic impurities (GTIs). In this study, a new approach for the recognition of GTIs has been proposed. It is to expose the complex samples to an in vitro nucleoside incubation model, and then draw complete DNA adduct profiles to infer the structures of potential genotoxic impurities (PGIs). Subsequently, the genotoxicity is confirmed in human by 3D bioprinted human liver organoids. To verify the feasibility of the approach, lansoprazole chloride compound (Lanchlor), a PGI during the synthesis of lansoprazole, was selected as the model drug. After confirming genotoxicity by Comet assay, it was exposed to different models to map and compare the DNA adduct profiles by LC-MS/MS. The results showed Lanchlor could generate diverse DNA adducts, revealing firstly its genotoxicity at molecular mechanism of action. Furthermore, the largest variety and content of DNA adducts were observed in the nucleoside incubation model, while the human liver organoids exhibited similar results with rats. The results showed that the combination of DNA adductomics and 3D bioprinted organoids were useful for the rapid screening of GTIs.

Mechanisms and influencing factors of peptide hydrogel formation and biomedicine applications of hydrogels

Self-assembled peptide-based hydrogels have shown great potential in bio-related applications due to their porous structure, strong mechanical stability, high biocompatibility, and easy functionalization. Herein, the structure and characteristics of hydrogels and the mechanism of action of several regular secondary structures during gelation are investigated. The factors influencing the formation of peptide hydrogels, especially the pH responsiveness and salt ion induction are analyzed and summarized. Finally, the biomedical applications of peptide hydrogels, such as bone tissue engineering, cell culture, antigen presentation, antibacterial materials, and drug delivery are reviewed.

Role of three-dimensional cell culture in therapeutics and diagnostics: an updated review

Drug development and testing are a tedious and expensive process with a high degree of uncertainty in the clinical success and preclinical validation of manufactured therapeutic agents. Currently, to understand the drug action, disease mechanism, and drug testing, most therapeutic drug manufacturers use 2D cell culture models to validate the drug action. However, there are many uncertainties and limitations with the conventional use of 2D (monolayer) cell culture models for drug testing that are primarily attributed due to poor mimicking of cellular mechanisms, disturbance in environmental interaction, and changes in structural morphology. To overcome such odds and difficulties in the preclinical validation of therapeutic medications, newer in vivo drug testing cell culture models with higher screening efficiencies are required. One such promising and advanced cell culture model reported recently is the "three-dimensional cell culture model." The 3D cell culture models are reported to show evident benefits over conventional 2D cell models. This review article outlines and describes the current advancement in cell culture models, their types, significance in high-throughput screening, limitations, applications in drug toxicity screening, and preclinical testing methodologies to predict in vivo efficacy.

A Critical Review on Classified Excipient Sodium-Alginate-Based Hydrogels: Modification, Characterization, and Application in Soft Tissue Engineering

Alginates are polysaccharides that are produced naturally and can be isolated from brown sea algae and bacteria. Sodium alginate (SA) is utilized extensively in the field of biological soft tissue repair and regeneration owing to its low cost, high biological compatibility, and quick and moderate crosslinking. In addition to their high printability, SA hydrogels have found growing popularity in tissue engineering, particularly due to the advent of 3D bioprinting. There is a developing curiosity in tissue engineering with SA-based composite hydrogels and their potential for further improvement in terms of material modification, the molding process, and their application. This has resulted in numerous productive outcomes. The use of 3D scaffolds for growing cells and tissues in tissue engineering and 3D cell culture is an innovative technique for developing in vitro culture models that mimic the in vivo environment. Especially compared to in vivo models, in vitro models were more ethical and cost-effective, and they stimulate tissue growth. This article discusses the use of sodium alginate (SA) in tissue engineering, focusing on SA modification techniques and providing a comparative examination of the properties of several SA-based hydrogels. This review also covers hydrogel preparation techniques, and a catalogue of patents covering different hydrogel formulations is also discussed. Finally, SA-based hydrogel applications and future research areas concerning SA-based hydrogels in tissue engineering were examined.

Organoids of the male reproductive system: Challenges, opportunities, and their potential use in fertility research

Organoids are units of function of a given organ able to reproduce, in culture, a biological structure similar in architecture and function to its counterpart in vivo. Today, it is possible to develop an organoid from a fragment of tissue, a stem cell located in an adult organ, an embryonic stem cell, or an induced pluripotent stem cell. In the past decade, many organoids have been developed which mimic stomach, pancreas, liver and brain tissues, optic cups, among many others. Additionally, different male reproductive system organs have already been developed as organoids, including the prostate and testis. These 3D cultures may be of great importance for urological cancer research and have the potential to be used in fertility research for the study of spermatozoa production and maturation, germ cells-somatic cells interactions, and mechanisms of disease. They also provide an accurate preclinical pipeline for drug testing and discovery, as well as for the study of drug resistance. In this work, we revise the current knowledge on organoid technology and its use in healthcare and research, describe the male reproductive system organoids and other biomaterials already developed, and discuss their current application. Finally, we highlight the research gaps, challenges, and opportunities in the field and propose strategies to improve the use of organoids for the study of male infertility situations. This article is categorized under: Reproductive System Diseases > Stem Cells and Development Reproductive System Diseases > Biomedical Engineering.

An injectable and self-healing cellulose nanofiber-reinforced alginate hydrogel for bone repair

Biomedical materials are in high demand for transplantation in cases of diseased or damaged bone tissue. Hydrogels are potential candidates for bone defect repair; however, traditional hydrogels lack the necessary strength and multiple functions. Herein, we effectively synthesized a cellulose nanofiber (CNF)-reinforced oxidized alginate (OSA)/gelatin (Gel) semi-interpenetrating network hydrogel through a facile one-step approach without a cross-linker by using the synergistic effects of dynamic imine bonds and hydrogen bonds. The OSA/Gel/CNF sample showed a notable compressive modulus (up to 361.3 KPa). The gelation time (~150 s) ensured excellent injectability. Self-healing exhibited a high efficiency of up to 92 %, which would enable minimally invasive, dynamic adjustments and personalized therapies. Furthermore, the OSA/Gel/CNF hydrogel showed excellent biomineralization (Ca/P ratio ~ 1.69) and enhanced preosteoblast cell (MC3T3-E1) viability (over 96 %), proliferation, and osteogenic differentiation. Thus, this multifunctional hydrogel has promising potential for using in the bone tissue repairs.

Toward 3D-Bioprinted Models of the Liver to Boost Drug Development

The main problems in drug development are connected to enormous costs related to the paltry success rate. The current situation empowered the development of high-throughput and reliable instruments, in addition to the current golden standards, able to predict the failures in the early preclinical phase. Being hepatotoxicity responsible for the failure of 30% of clinical trials, and the 21% of withdrawal of marketed drugs, the development of complex in vitro models (CIVMs) of liver is currently one of the hottest topics in the field. Among the different fabrication techniques, 3D-bioprinting is emerging as a powerful ally for their production, allowing the manufacture of three-dimensional constructs characterized by computer-controlled and customized geometry, and inter-batches reproducibility. Thanks to these, it is possible to rapidly produce tailored cell-laden constructs, to be cultured within static and dynamic systems, thus reaching a further degree of personalization when designing in vitro models. This review highlights and prioritizes the most recent advances related to the development of CIVMs of the hepatic environment to be specifically applied to pharmaceutical research, with a special focus on 3D-bioprinting, since the liver is primarily involved in the metabolism of drugs.

Constructing biomimetic liver models through biomaterials and vasculature engineering

The occurrence of various liver diseases can lead to organ failure of the liver, which is one of the leading causes of mortality worldwide. Liver tissue engineering see the potential for replacing liver transplantation and drug toxicity studies facing donor shortages. The basic elements in liver tissue engineering are cells and biomaterials. Both mature hepatocytes and differentiated stem cells can be used as the main source of cells to construct spheroids and organoids, achieving improved cell function. To mimic the extracellular matrix (ECM) environment, biomaterials need to be biocompatible and bioactive, which also help support cell proliferation and differentiation and allow ECM deposition and vascularized structures formation. In addition, advanced manufacturing approaches are required to construct the extracellular microenvironment, and it has been proved that the structured three-dimensional culture system can help to improve the activity of hepatocytes and the characterization of specific proteins. In summary, we review biomaterials for liver tissue engineering, including natural hydrogels and synthetic polymers, and advanced processing techniques for building vascularized microenvironments, including bioassembly, bioprinting and microfluidic methods. We then summarize the application fields including transplant and regeneration, disease models and drug cytotoxicity analysis. In the end, we put the challenges and prospects of vascularized liver tissue engineering.

A focused review on three-dimensional bioprinting technology for artificial organ fabrication

Three-dimensional (3D) bioprinting technology has attracted a great deal of interest because it can be easily adapted to many industries and research sectors, such as biomedical, manufacturing, education, and engineering. Specifically, 3D bioprinting has provided significant advances in the medical industry, since such technology has led to significant breakthroughs in the synthesis of biomaterials, cells, and accompanying elements to produce composite living tissues. 3D bioprinting technology could lead to the immense capability of replacing damaged or injured tissues or organs with newly dispensed cell biomaterials and functional tissues. Several types of bioprinting technology and different bio-inks can be used to replicate cells and generate supporting units as complex 3D living tissues. Bioprinting techniques have undergone great advancements in the field of regenerative medicine to provide 3D printed models for numerous artificial organs and transplantable tissues. This review paper aims to provide an overview of 3D-bioprinting technologies by elucidating the current advancements, recent progress, opportunities, and applications in this field. It highlights the most recent advancements in 3D-bioprinting technology, particularly in the area of artificial organ development and cancer research. Additionally, the paper speculates on the future progress in 3D-bioprinting as a versatile foundation for several biomedical applications.

Emerging tissue engineering strategies for the corneal regeneration

Cornea as the outermost layer of the eye is at risk of various genetic and environmental diseases that can damage the cornea and impair vision. Corneal transplantation is among the most applicable surgical procedures for repairing the defected tissue. However, the scarcity of healthy tissue donations as well as transplantation failure has remained as the biggest challenges in confront of corneal grafting. Therefore, alternative approaches based on stem-cell transplantation and classic regenerative medicine have been developed for corneal regeneration. In this review, the application and limitation of the recently-used advanced approaches for regeneration of cornea are discussed. Additionally, other emerging powerful techniques such as 5D printing as a new branch of scaffold-based technologies for construction of tissues other than the cornea are highlighted and suggested as alternatives for corneal reconstruction. The introduced novel techniques may have great potential for clinical applications in corneal repair including disease modeling, 3D pattern scheming, and personalized medicine.

Nanomedicine, a valuable tool for skeletal muscle disorders: Challenges, promises, and limitations

Muscular dystrophies are a group of rare genetic disorders characterized by progressive muscle weakness, which, in the most severe forms, leads to the patient's death due to cardiorespiratory problems. There is still no cure available for these diseases and significant effort is being placed into developing new strategies to either correct the genetic defect or to compensate muscle loss by stimulating skeletal muscle regeneration. However, the vast anatomical extension of the target tissue poses great challenges to these goals, highlighting the need for complementary strategies. Nanomedicine is an actively evolving field that merges nanotechnologies with biomedical and pharmaceutical sciences. It holds great potential in regenerative medicine, both in supporting tissue engineering and regeneration, and in optimizing drug and oligonucleotide delivery and gene therapy strategies. In this review, we will summarize the state‐of‐the‐art in the field of nanomedicine applied to skeletal muscle regeneration. We will discuss the recent work toward the development of nanopatterned scaffolds for tissue engineering, the efforts in the synthesis of organic and inorganic nanoparticles for gene therapy and drug delivery applications, as well as their use as immune modulators. Although nanomedicine holds great promise for muscle and other degenerative diseases, many challenges still need to be systematically addressed to assure a smooth transition from the bench to the bedside.

This article is categorized under:

Implantable Materials and Surgical Technologies > Nanotechnology in Tissue Repair and Replacement

"Compoundless Anaesthesia", Controlled Administration, and Post-Operative Recovery Acceleration: Musings on Theoretical Nanomedicine Applications

Much research has been conducted on how patients may be served through new advances in perioperative anaesthetic care. However, adaptations of standardised care methodologies can only provide so many novel solutions for patients and caregivers alike. Similarly, unique methods such as nanoscopic liposomal package delivery for analgesics and affective numbing agents pose a similar issue-specifically that we are still left with the dilemma of patients for whom analgesics and numbing agents are ineffective or harmful. An examination of the potential gains that may result from the targeted development of nanorobotics for anaesthesia in perioperative care will be presented in this essay to help resolve this pending conflict for the research community. This examination should therefore serve as a "call to action" for such research and a "primer" for those for whom the method's implementation would most directly impact.

Prospect of 3D bioprinting over cardiac cell therapy and conventional tissue engineering in the treatment of COVID-19 patients with myocardial injury

Due to multiple mutations of SARS-CoV-2, the mystery of defeating the virus is still unknown. Cardiovascular complications are one of the most concerning effects of COVID-19 recently, originating from direct and indirect mechanisms. These complications are associated with long-term Cardio-vascular diseases and can induce sudden cardiac death in both infected and recovered COVID-19 patients. The purpose of this research is to do a competitive analysis between conventional techniques with the upgraded alternative 3D bioprinting to replace the damaged portion of the myocardium. Additionally, this study focuses on the potential of 3D bioprinting to be a novel alternative. Finally, current challenges and future perspective of 3D bioprinting technique is briefly discussed.

In Vitro Strategies to Vascularize 3D Physiologically Relevant Models

Vascularization of 3D models represents a major challenge of tissue engineering and a key prerequisite for their clinical and industrial application. The use of prevascularized models built from dedicated materials could solve some of the actual limitations, such as suboptimal integration of the bioconstructs within the host tissue, and would provide more in vivo-like perfusable tissue and organ-specific platforms. In the last decade, the fabrication of vascularized physiologically relevant 3D constructs has been attempted by numerous tissue engineering strategies, which are classified here in microfluidic technology, 3D coculture models, namely, spheroids and organoids, and biofabrication. In this review, the recent advancements in prevascularization techniques and the increasing use of natural and synthetic materials to build physiological organ-specific models are discussed. Current drawbacks of each technology, future perspectives, and translation of vascularized tissue constructs toward clinics, pharmaceutical field, and industry are also presented. By combining complementary strategies, these models are envisioned to be successfully used for regenerative medicine and drug development in a near future.

3D bioprinting for fabricating artificial skin tissue

As an organ in direct contact with the external environment, the skin is the first line of defense against external stimuli, so it is the most vulnerable to damage. In addition, there is an increasing demand for artificial skin in the fields of drug testing, disease research and cosmetic testing. Traditional skin tissue engineering has made encouraging progress after years of development. However, due to the complexity of the skin structures, there is still a big gap between existing artificial skin and natural skin in terms of function. Three-dimensional (3D) bioprinting is an advanced biological manufacturing method. It accurately deposits bioinks into pre-designed three-dimensional shapes to create complex biological tissues. This technology aims to print artificial tissues and organs with biological activities and complete physiological functions, thereby alleviating the problem of tissues and organs in short supply. Here, based on the introduction to skin structure and function, we systematically elaborate and analyze skin manufacturing methods, 3D bioprinting biomaterials and strategies, etc. Finally, the challenges and perspectives in 3D bioprinting skin field are summarized.

Patient-Specific Organoid and Organ-on-a-Chip: 3D Cell-Culture Meets 3D Printing and Numerical Simulation

The last few decades have witnessed diversified in vitro models to recapitulate the architecture and function of living organs or tissues and contribute immensely to advances in life science. Two novel 3D cell culture models: 1) Organoid, promoted mainly by the developments of stem cell biology and 2) Organ-on-a-chip, enhanced primarily due to microfluidic technology, have emerged as two promising approaches to advance the understanding of basic biological principles and clinical treatments. This review describes the comparable distinct differences between these two models and provides more insights into their complementarity and integration to recognize their merits and limitations for applicable fields. The convergence of the two approaches to produce multi-organoid-on-a-chip or human organoid-on-a-chip is emerging as a new approach for building 3D models with higher physiological relevance. Furthermore, rapid advancements in 3D printing and numerical simulations, which facilitate the design, manufacture, and results-translation of 3D cell culture models, can also serve as novel tools to promote the development and propagation of organoid and organ-on-a-chip systems. Current technological challenges and limitations, as well as expert recommendations and future solutions to address the promising combinations by incorporating organoids, organ-on-a-chip, 3D printing, and numerical simulation, are also summarized.

Lightweight 3D bioprinting with point by point photocuring

As photocrosslinkable materials, methacryloyl-modified hydrogels are widely used as bioinks in tissue engineering. Existing printing methods to use these hydrogels, including changing the viscosity of the material or mixing them with other printing components, have been explored, but their application has been limited due to low printing quality or high cost. In addition, the complex operation of bulky equipment restricts the application of these existing printing methods. This study presents a lightweight stereolithography-based three-dimensional (3D) bioprinting system with a smart mechanical and structural design. The developed bioprinter dimensions were 300 mm × 300 mm × 200 mm and it can be placed on a benchtop. The equipment has a mini bioink chamber to store a small amount of bioink for each printing. We systematically investigated the point-by-point curing process in the 3D bioprinting method, which can print mixed cells accurately and have good biocompatibility. Here, we provide a compact, low-cost stereolithography bioprinting system with excellent biocompatibility for 3D bioprinting with methacryloyl-modified hydrogels. It can be potentially used for drug screening, studying pathological mechanisms, and constructing biological disease models.

Rapid fabrication of gelatin-based scaffolds with prevascularized channels for organ regeneration

One of the biggest hinders in tissue engineering over the last decades was the complexity of the prevascularized channels of the engineered scaffold, which was still lower than that of human tissues. Another relative trouble was lacking precision molding capability, which restricted the clinical applications of the huge engineered scaffold. In this study, a promising approach was proposed to prepare hydrogel scaffold with prevascularized channels by liquid bath printing, which chitosan/β-sodium glycerophosphate (CS/β-GP) severed as the ink hydrogel, and gelation/nanoscale bacterial cellulose (Gel/BC) acted as the supporting hydrogel. Here, the ink hydrogel was printed by a versatile nozzle and embedded in the supporting hydrogel. Ink hydrogel transformed into liquid effluent at low temperature after cross-linking of gelatin by microbial transglutaminase (mTG). No residual template was seen on the channel surface after template removal. This preparation had a high degree of freedom in the geometry of the channel, which was demonstrated by making various prevascularized channels including circular, branched, and tree-shaped networks. The molding accuracy of the channel was detected by studying the roundness of the cross-section of the molded hollow channel, and the effect of the mechanical properties by adding BC to supporting hydrogel was analyzed. Human umbilical vein endothelial cells (HUVECs) were injected into the aforementioned channels and formed confluent and homogeneous distribution on the surface of channels. Altogether, these results showed that this approach can construct hydrogel scaffold with complex and accurate molding prevascularized channels, and had great potential to resolve urgent vascularization issue of bulk tissue-engineering scaffold.

Biofabricating murine and human myo-substitutes for rapid volumetric muscle loss restoration

The importance of skeletal muscle tissue is undoubted being the controller of several vital functions including respiration and all voluntary locomotion activities. However, its regenerative capability is limited and significant tissue loss often leads to a chronic pathologic condition known as volumetric muscle loss. Here, we propose a biofabrication approach to rapidly restore skeletal muscle mass, 3D histoarchitecture, and functionality. By recapitulating muscle anisotropic organization at the microscale level, we demonstrate to efficiently guide cell differentiation and myobundle formation both in vitro and in vivo. Of note, upon implantation, the biofabricated myo-substitutes support the formation of new blood vessels and neuromuscular junctions-pivotal aspects for cell survival and muscle contractile functionalities-together with an advanced muscle mass and force recovery. Altogether, these data represent a solid base for further testing the myo-substitutes in large animal size and a promising platform to be eventually translated into clinical scenarios.

Current Advances on 3D-Bioprinted Liver Tissue Models

The liver, the largest gland in the human body, plays a key role in metabolism, bile production, detoxification, and water and electrolyte regulation. The toxins or drugs that the gastrointestinal system absorbs reach the liver first before entering the bloodstream. Liver disease is one of the leading causes of death worldwide. Therefore, an in vitro liver tissue model that reproduces the main functions of the liver can be a reliable platform for investigating liver diseases and developing new drugs. In addition, the limitations in traditional, planar monolayer cell cultures and animal tests for evaluating the toxicity and efficacy of drug candidates can be overcome. Currently, the newly emerging 3D bioprinting technologies have the ability to construct in vitro liver tissue models both in static scaffolds and dynamic liver-on-chip manners. This review mainly focuses on the construction and applications of liver tissue models based on 3D bioprinting. Special attention is given to 3D bioprinting strategies and bioinks for constructing liver tissue models including the cell sources and hydrogel selection. In addition, the main advantages and limitations and the major challenges and future perspectives are discussed, paving the way for the next generation of in vitro liver tissue models.

Simplified Bioprinting-Based 3D Cell Culture Infection Models for Virus Detection

Studies of virus-host interactions in vitro may be hindered by biological characteristics of conventional monolayer cell cultures that differ from in vivo infection. Three-dimensional (3D) cell cultures show more in vivo-like characteristics and may represent a promising alternative for characterisation of infections. In this study, we established easy-to-handle cell culture platforms based on bioprinted 3D matrices for virus detection and characterisation. Different cell types were cultivated on these matrices and characterised for tissue-like growth characteristics regarding cell morphology and polarisation. Cells developed an in vivo-like morphology and long-term cultivation was possible on the matrices. Cell cultures were infected with viruses which differed in host range, tissue tropism, cytopathogenicity, and genomic organisation and virus morphology. Infections were characterised on molecular and imaging level. The transparent matrix substance allowed easy optical monitoring of cells and infection even via live-cell microscopy. In conclusion, we established an enhanced, standardised, easy-to-handle bioprinted 3D-cell culture system. The infection models are suitable for sensitive monitoring and characterisation of virus-host interactions and replication of different viruses under physiologically relevant conditions. Individual cell culture models can further be combined to a multicellular array. This generates a potent diagnostic tool for propagation and characterisation of viruses from diagnostic samples.

Synthetic peptide hydrogels as 3D scaffolds for tissue engineering

The regeneration of tissues and organs poses an immense challenge due to the extreme complexity in the research work involved. Despite the tissue engineering approach being considered as a promising strategy for more than two decades, a key issue impeding its progress is the lack of ideal scaffold materials. Nature-inspired synthetic peptide hydrogels are inherently biocompatible, and its high resemblance to extracellular matrix makes peptide hydrogels suitable 3D scaffold materials. This review covers the important aspects of peptide hydrogels as 3D scaffolds, including mechanical properties, biodegradability and bioactivity, and the current approaches in creating matrices with optimized features. Many of these scaffolds contain peptide sequences that are widely reported for tissue repair and regeneration and these peptide sequences will also be discussed. Furthermore, 3D biofabrication strategies of synthetic peptide hydrogels and the recent advances of peptide hydrogels in tissue engineering will also be described to reflect the current trend in the field. In the final section, we will present the future outlook in the design and development of peptide-based hydrogels for translational tissue engineering applications.

Advances on Bone Substitutes through 3D Bioprinting

Reconstruction of bony defects is challenging when conventional grafting methods are used because of their intrinsic limitations (biological cost and/or biological properties). Bone regeneration techniques are rapidly evolving since the introduction of three-dimensional (3D) bioprinting. Bone tissue engineering is a branch of regenerative medicine that aims to find new solutions to treat bone defects, which can be repaired by 3D printed living tissues. Its aim is to overcome the limitations of conventional treatment options by improving osteoinduction and osteoconduction. Several techniques of bone bioprinting have been developed: inkjet, extrusion, and light-based 3D printers are nowadays available. Bioinks, i.e., the printing materials, also presented an evolution over the years. It seems that these new technologies might be extremely promising for bone regeneration. The purpose of the present review is to give a comprehensive summary of the past, the present, and future developments of bone bioprinting and bioinks, focusing the attention on crucial aspects of bone bioprinting such as selecting cell sources and attaining a viable vascularization within the newly printed bone. The main bioprinters currently available on the market and their characteristics have been taken into consideration, as well.

Digital biofabrication to realize the potentials of plant roots for product design

Technological and economic opportunities, alongside the apparent ecological benefits, point to biodesign as a new industrial paradigm for the fabrication of products in the twenty-first century. The presented work studies plant roots as a biodesign material in the fabrication of self-supported 3D structures, where the biologically and digitally designed materials provide each other with structural stability. Taking a material-driven design approach, we present our systematic tinkering activities with plant roots to better understand and anticipate their responsive behaviour. These helped us to identify the key design parameters and advance the unique potential of plant roots to bind discrete porous structures. We illustrate this binding potential of plant roots with a hybrid 3D object, for which plant roots connect 600 computationally designed, optimized, and fabricated bioplastic beads into a low stool.

3D Printing of Gelled and Cross-Linked Cellulose Solutions, an Exploration of Printing Parameters and Gel Behaviour

In recent years, 3D printing has enabled the fabrication of complex designs, with low-cost customization and an ever-increasing range of materials. Yet, these abilities have also created an enormous challenge in optimizing a large number of process parameters, especially in the 3D printing of swellable, non-toxic, biocompatible and biodegradable materials, so-called bio-ink materials. In this work, a cellulose gel, made out of aqueous solutions of cellulose, sodium hydroxide and urea, was used to demonstrate the formation of a shear thinning bio-ink material necessary for an extrusion-based 3D printing. After analysing the shear thinning behaviour of the cellulose gel by rheometry a Design of Experiments (DoE) was applied to optimize the 3D bioprinter settings for printing the cellulose gel. The optimum print settings were then used to print a human ear shape, without a need for support material. The results clearly indicate that the found settings allow the printing of more complex parts with high-fidelity. This confirms the capability of the applied method to 3D print a newly developed bio-ink material.

Process-Structure-Quality Relationships of Three-Dimensional Printed Poly(Caprolactone)-Hydroxyapatite Scaffolds

Bone defects are common and, in many cases, challenging to treat. Tissue engineering is an interdisciplinary approach with promising potential for treating bone defects. Within tissue engineering, three-dimensional (3D) printing strategies have emerged as potent tools for scaffold fabrication. However, reproducibility and quality control are critical aspects limiting the translation of 3D printed scaffolds to clinical use, which remain to be addressed. To elucidate the factors that yield to the generation of defects in bioprinting and to achieve reproducible biomaterial printing, the objective of this article is to frame a systematic approach for optimizing and validating 3D printing of poly(caprolactone) (PCL)-hydroxyapatite (HAp) composite scaffolds. We delineate the effect of PCL-to-HAp ratio, print velocity, print temperature, and extrusion pressure on the architectural and mechanical properties of the 3D printed scaffold. Furthermore, we present an in situ image-based monitoring approach to quantify key quality-related aspects of constructs, such as the ability to deposit material consistently and print elementary shapes with fewer flaws. Our results show that small defects generated during the printing process have a significant role in lowering the mechanical properties of 3D printed polymeric scaffolds. In addition, the in vitro osteoinductivity of the fabricated scaffolds is demonstrated. Impact statement Identifying quality control measures is essential in the translation of three-dimensional (3D) printed scaffolds into clinical practice. In this article, we highlighted the importance of selected printing parameters on the quality of the 3D printed scaffolds. We also demonstrated that flaws, such as voids, significantly lower the mechanical properties (compressive modulus) of 3D printed polymeric scaffolds.

Advanced Biomaterials and Processing Methods for Liver Regeneration: State-of-the-Art and Future Trends

Liver diseases contribute markedly to the global burden of mortality and disease. The limited organ disposal for orthotopic liver transplantation results in a continuing need for alternative strategies. Over the past years, important progress has been made in the field of tissue engineering (TE). Many of the early trials to improve the development of an engineered tissue construct are based on seeding cells onto biomaterial scaffolds. Nowadays, several TE approaches have been developed and are applied to one vital organ: the liver. Essential elements must be considered in liver TE-cells and culturing systems, bioactive agents or growth factors (GF), and biomaterials and processing methods. The potential of hepatocytes, mesenchymal stem cells, and others as cell sources is demonstrated. They need engineered biomaterial-based scaffolds with perfect biocompatibility and bioactivity to support cell proliferation and hepatic differentiation as well as allowing extracellular matrix deposition and vascularization. Moreover, they require a microenvironment provided using conventional or advanced processing technologies in order to supply oxygen, nutrients, and GF. Herein the biomaterials and the conventional and advanced processing technologies, including cell-sheets process, 3D bioprinting, and microfluidic systems, as well as the future trends in these major fields are discussed.

Inorganic Sol-Gel Polymerization for Hydrogel Bioprinting

An inorganic sol-gel polymerization process was used as a cross-linking reaction during three-dimensional (3D) bioprinting of cell-containing hydrogel scaffolds. Hybrid hydroxypropyl methyl cellulose (HPMC), with a controlled ratio of silylation, was prepared and isolated as a 3D-network precursor. When dissolved in a biological buffer containing human mesenchymal stem cells, it yields a bioink that can be printed during polymerization by extrusion. It is worth noting that the sol-gel process proceeded at pH 7.4 using biocompatible mode of catalysis (NaF and glycine). The printing window was determined by rheology and viscosity measurements. The physicochemical properties of hydrogels were studied. Covalent functionalization of the network can be easily performed by adding a triethoxysilyl-containing molecule; a fluorescent hybrid molecule was used as a proof of concept.

Dipeptide Self-Assembled Hydrogels with Tunable Mechanical Properties and Degradability for 3D Bioprinting

Supramolecular hydrogels self-assembled from short peptides have shown great potential as biomimetic extracellular matrices with controllable properties designed at the molecular level. However, their weak mechanical strength still remains a big challenge for 3D bioprinting. Herein, two oppositely charged dipeptides are designed and used as bioinks in a ″layer-by-layer″ alternative bioprinting strategy. During printing, in situ gelation is achieved by electrostatic interactions between two dipeptides without additional cross-linking procedures. The binary hydrogels have tunable mechanical properties with elastic moduli ranging from 4 to 62 kPa and controllable biodegradability from days to weeks, which can ideally mimic the natural environment of a variety of cell types. It is demonstrated that the hydrogel scaffold enables the formation, growth, and natural release of HepaRG spheroids with sizes up to millimeters. This strategy may be suitable to develop a series of new bioink materials based on peptides and other supramolecular polymers for 3D bioprinting.

3D biofabrication of microfiber-laden minispheroids: a facile 3D cell co-culturing system

Hierarchical tissues composed of spheroid and fiber structures such as tumors, embryos and glomeruli widely exist in organisms. Methods have been developed to build spheroid and fiber structures, independently, as tissue models in vitro. However, it is still a challenge to print them simultaneously and integrated for effectively mimicking the complicated situations in vivo. Here, we propose a novel 3D cell co-culturing system, "microfiber-laden minispheroid", applying two fluidic phenomena, namely the "rope coiling effect" and "electrohydrodynamics", with a co-axial bioprinting nozzle and high voltage system. Gelatin methacryloyl (GelMA) hydrogels were extruded from the outer nozzle and separated by electrical attraction to form spheroids (∼1800 μm). GelMA mixed with sodium alginate was extruded from the inner nozzle to form fibers (∼180 μm) inside spheroids, whose morphology could be controlled by the ratio of inner and outer nozzle extruding flow rates. We analyzed the fabrication process and the material system in detail, verifying the fabrication feasibility and suitable microenvironment. The encapsulated cells possessed high viabilities. Importantly, the actin of human umbilical vein endothelial cells tended to elongate towards the co-cultured tumor cells, in contrast to the HUVECs cultured alone. We believe that "microfiber-laden minispheroids" could be a potential system for 3D cell co-culturing research in the future.

Microfluidic Fabrication of Biomimetic Helical Hydrogel Microfibers for Blood-Vessel-on-a-Chip Applications

Nature has created many perfect helical microstructures, including DNA, collagen fibrils, and helical blood vessels, to achieve unique physiological functions. While previous studies have developed a number of microfabrication strategies, the preparation of complex helical structures and cell-laden helical structures for biomimetic applications remains challenging. In this study, a one-step microfluidics-based methodology is presented for preparing complex helical hydrogel microfibers and cell-laden helical hydrogel microfibers. Several types of complex helical structures, including multilayer helical microfibers and superhelical hollow microfibers with helical channels, are prepared by simply tuning the flow rates or modifying the geometry of microfluidic device. With the decent perfusability, the hollow microfibers may simulate the structural characteristics of helical blood vessels and create swirling blood flow in a blood-vessel-on-chip setup. Such hydrogel-based helical microstructures may potentially be used in areas such as blood vessel tissue engineering, organ-on-chips, drug screening, and biological actuators.

3D Bioprinting in Skeletal Muscle Tissue Engineering

Skeletal muscle tissue engineering (SMTE) aims at repairing defective skeletal muscles. Until now, numerous developments are made in SMTE; however, it is still challenging to recapitulate the complexity of muscles with current methods of fabrication. Here, after a brief description of the anatomy of skeletal muscle and a short state-of-the-art on developments made in SMTE with "conventional methods," the use of 3D bioprinting as a new tool for SMTE is in focus. The current bioprinting methods are discussed, and an overview of the bioink formulations and properties used in 3D bioprinting is provided. Finally, different advances made in SMTE by 3D bioprinting are highlighted, and future needs and a short perspective are provided.

Cell membrane engineering with synthetic materials: Applications in cell spheroids, cellular glues and microtissue formation

Biologically inspired materials with tunable bio- and physicochemical properties provide an essential framework to actively control and support cellular behavior. Cell membrane remodeling approaches benefit from the advances in polymer science and bioconjugation methods, which allow for the installation of un-/natural molecules and particles on the cells' surface. Synthetically remodeled cells have superior properties and are under intense investigation in various therapeutic scenarios as cell delivery systems, bio-sensing platforms, injectable biomaterials and bioinks for 3D bioprinting applications. In this review article, recent advances in the field of cell surface remodeling via bio-chemical means and the potential biomedical applications of these emerging cell hybrids are discussed. STATEMENT OF SIGNIFICANCE: Recent advances in bioconjugation methods, controlled/living polymerizations, microfabrication techniques and 3D printing technologies have enabled researchers to probe specific cellular functions and cues for therapeutic and research purposes through the formation of cell spheroids and polymer-cell chimeras. This review article highlights recent non-genetic cell membrane engineering strategies towards the fabrication of cellular ensembles and microtissues with interest in 3D in vitro modeling, cell therapeutics and tissue engineering. From a wider perspective, these approaches may provide a roadmap for future advances in cell therapies which will expedite the clinical use of cells, thereby improving the quality and accessibility of disease treatments.

Vessel-on-a-chip with Hydrogel-based Microfluidics

Hydrogel structures equipped with internal microchannels offer more in vivo-relevant models for construction of tissues and organs in vitro. However, currently used microfabrication methods of constructing microfluidic devices are not suitable for the handling of hydrogel. This study presents a novel method of fabricating hydrogel-based microfluidic chips by combining the casting and bonding processes. A twice cross-linking strategy is designed to obtain a bonding interface that has the same strength with the hydrogel bulk, which can be applied to arbitrary combinations of hydrogels. It is convenient to achieve the construction of hydrogel structures with channels in branched, spiral, serpentine, and multilayer forms. The experimental results show that the combination of gelatin and gelatin methacrylate (GelMA) owns the best biocompatibility and can promote cell functionalization. Based on these, a vessel-on-a-chip system with vascular function in both physiological and pathological situations is established, providing a promising model for further investigations such as vascularization, vascular inflammation, tissue engineering, and drug development. Taken together, a facile and cytocompatible approach is developed for engineering a user-defined hydrogel-based chip that can be potentially useful in developing vascularized tissue or organ models.

The comparison genomics analysis with glioblastoma multiforme (GBM) cells under 3D and 2D cell culture conditions

GBM, the most common and aggressive malignant primary brain tumors which needs new research approach to reveal the underline molecular mechanism of tumor progression. The 3D in vitro tumor model can be a simple and effective way to study tumor characteristics with ability to replicate of the tumor milieu. In the current study, we adopted the DNA microarray to analyze the gene expression of GBM tumor cells cultured under 2D cell culture flasks and 3D PLA porous scaffolds for 4,7 and 14 days. For 14 day old cultures, 8117 and 3060 genes expression were upregulated and downregulated respectively. Further KEGG pathway analysis revealed, the upregulated genes were mainly enriched/involved in PPAR and PI3K-Akt signaling pathways whereas the downregulated genes were mainly contributed in metabolism, ECM related and TGF-beta pathways. Thus, our approach of establishing 3D in vitro tumor model provides realistic results and proves itself a powerful tool for understanding the inner nature of GBM and can be considered as potential platform for drug screening.

3D biofabrication for tubular tissue engineering

The therapeutic replacement of diseased tubular tissue is hindered by the availability and suitability of current donor, autologous and synthetically derived protheses. Artificially created, tissue engineered, constructs have the potential to alleviate these concerns with reduced autoimmune response, high anatomical accuracy, long-term patency and growth potential. The advent of 3D bioprinting technology has further supplemented the technological toolbox, opening up new biofabrication research opportunities and expanding the therapeutic potential of the field. In this review, we highlight the challenges facing those seeking to create artificial tubular tissue with its associated complex macro- and microscopic architecture. Current biofabrication approaches, including 3D printing techniques, are reviewed and future directions suggested.