Depolymerization of a hydroxy fatty acid biopolymer, cutin, by an extracellular enzyme from Fusarium solani f. pisi: isolation and some properties of the enzyme

Altering the Chain Length Specificity of a Lipase from Pleurotus citrinopileatus for the Application in Cheese Making

In traditional cheese making, pregastric lipolytic enzymes of animal origin are used for the acceleration of ripening and the formation of spicy flavor compounds. Especially for cheese specialities, such as Pecorino, Provolone, or Feta, pregastric esterases (PGE) play an important role. A lipase from Pleurotus citrinopileatus could serve as a substitute for these animal-derived enzymes, thus offering vegetarian, kosher, and halal alternatives. However, the hydrolytic activity of this enzyme towards long-chain fatty acids is slightly too high, which may lead to off-flavors during long-term ripening. Therefore, an optimization via protein engineering (PE) was performed by changing the specificity towards medium-chain fatty acids. With a semi-rational design, possible mutants at eight different positions were created and analyzed in silico. Heterologous expression was performed for 24 predicted mutants, of which 18 caused a change in the hydrolysis profile. Three mutants (F91L, L302G, and L305A) were used in application tests to produce Feta-type brine cheese. The sensory analyses showed promising results for cheeses prepared with the L305A mutant, and SPME-GC-MS analysis of volatile free fatty acids supported these findings. Therefore, altering the chain length specificity via PE becomes a powerful tool for the replacement of PGEs in cheese making.

Replacement of Pregastric Lipases in Cheese Production: Identification and Heterologous Expression of a Lipase from Pleurotus citrinopileatus

Traditionally produced piquant cheeses such as Feta or Provolone rely on pregastric lipolytic enzymes of animal origin to intensify flavor formation during ripening. Herein, we report a novel fungal lipase, derived from the phylum Basidiomycota to replace animal-derived products. A screening of 31 strains for the desired hydrolytic activities was performed, which revealed a promising fungal species. The secretome of an edible golden oyster mushroom, Pleurotus citrinopileatus, provided suitable enzymatic activity, and the coding sequence of the corresponding enzyme was identified by combining transcriptome and liquid chromatography high-resolution electrospray tandem mass spectroscopy (LC-HR-ESI-MS/MS) data. Recombinant expression in Escherichia coli BL21 (DE3) using chaperones GroES-GroEL and DnaK-DnaJ-GrpE was established. The recombinant lipolytic enzyme was purified and biochemically characterized in terms of thermal and pH stability, optimal reaction conditions, and kinetic data toward p-nitrophenyl esters. An application in the microscale production of Feta-type brine cheese revealed promising sensory properties, which were confirmed by headspace solid-phase microextraction gas chromatography mass spectrometry (HS-SPME-GC-MS) analyses in comparison with the reference enzyme opti-zym z10uc from goat origin. Supplementation with 2.3 U of the heterologously expressed fungal lipase produced the most comparable free fatty acid profile after 30 days of ripening. The flavor and texture formed during the application of the new lipase from P. citrinopileatus proved to be competitive to the use of pregastric lipases and could therefore replace the products of animal origin.

The Multifaceted Roles of Fungal Cutinases during Infection

Cuticles cover the aerial epidermis cells of terrestrial plants and thus represent the first line of defence against invading pathogens, which must overcome this hydrophobic barrier to colonise the inner cells of the host plant. The cuticle is largely built from the cutin polymer, which consists of C16 and C18 fatty acids attached to a glycerol backbone that are further modified with terminal and mid-chain hydroxyl, epoxy, and carboxy groups, all cross-linked by ester bonds. To breach the cuticle barrier, pathogenic fungal species employ cutinases-extracellular secreted enzymes with the capacity to hydrolyse the ester linkages between cutin monomers. Herein, we explore the multifaceted roles that fungal cutinases play during the major four stages of infection: (i) spore landing and adhesion to the host plant cuticle; (ii) spore germination on the host plant cuticle; (iii) spore germ tube elongation and the formation of penetrating structures; and (iv) penetration of the host plant cuticle and inner tissue colonisation. Using previous evidence from the literature and a comprehensive molecular phylogenetic tree of cutinases, we discuss the notion whether the lifestyle of a given fungal species can predict the activity nature of its cutinases.

Structure-guided engineering of a Thermobifida fusca cutinase for enhanced hydrolysis on natural polyester substrate

Cutinases could degrade insoluble polyester, including natural cutin and synthetic plastic. However, their turnover efficiency for polyester remains too low for industrial application. Herein, we report the 1.54-Å resolution X-ray crystal structure of a cutinase from Thermobifida fusca and modeling structure in complex with a cutin mimic oligo-polyester C24H42O8. These efforts subsequently guided our design of cutinase variants with less bulky residues in the vicinity of the substrate binding site. The L90A and I213A variants exhibit increased hydrolysis activity (5- and 2.4-fold, respectively) toward cutin and also showed enhanced cotton scouring efficiency compared with the wild-type enzyme.

High Throughput Screening for New Fungal Polyester Hydrolyzing Enzymes

There is a strong need for novel and more efficient polyester hydrolyzing enzymes in order to enable the development of more environmentally friendly plastics recycling processes allowing the closure of the carbon cycle. In this work, a high throughput system on microplate scale was used to screen a high number of fungi for their ability to produce polyester-hydrolyzing enzymes. For induction of responsible enzymes, the fungi were cultivated in presence of aliphatic and aromatic polyesters [poly(1,4-butylene adipate co terephthalate) (PBAT), poly(lactic acid) (PLA) and poly(1,4-butylene succinate) (PBS)], and the esterase activity in the culture supernatants was compared to the culture supernatants of fungi grown without polymers. The results indicate that the esterase activity of the culture supernatants was induced in about 10% of the tested fungi when grown with polyesters in the medium, as indicated by increased activity (to >50 mU/mL) toward the small model substrate para-nitrophenylbutyrate (pNPB). Incubation of these 50 active culture supernatants with different polyesters (PBAT, PLA, PBS) led to hydrolysis of at least one of the polymers according to liquid chromatography-based quantification of the hydrolysis products terephthalic acid, lactic acid and succinic acid, respectively. Interestingly, the specificities for the investigated polyesters varied among the supernatants of the different fungi.

Enzymatic Degradation of p-Nitrophenyl Esters, Polyethylene Terephthalate, Cutin, and Suberin by Sub1, a Suberinase Encoded by the Plant Pathogen Streptomyces scabies

The genome of Streptomyces scabies, the predominant causal agent of potato common scab, encodes a potential cutinase, the protein Sub1, which was previously shown to be specifically induced in the presence of suberin. The sub1 gene was expressed in Escherichia coli and the recombinant protein Sub1 was purified and characterized. The enzyme was shown to be versatile because it hydrolyzes a number of natural and synthetic substrates. Sub1 hydrolyzed p-nitrophenyl esters, with the hydrolysis of those harboring short carbon chains being the most effective. The V_max and K_m values of Sub1 for p-nitrophenyl butyrate were 2.36 mol g^-1 min^-1 and 5.7 10^-4 M, respectively. Sub1 hydrolyzed the recalcitrant polymers cutin and suberin because the release of fatty acids from these substrates was observed following the incubation of the enzyme with these polymers. Furthermore, the hydrolyzing activity of the esterase Sub1 on the synthetic polymer polyethylene terephthalate (PET) was demonstrated by the release of terephthalic acid (TA). Sub1 activity on PET was markedly enhanced by the addition of Triton and was shown to be stable at 37°C for at least 20 d.

A Middle-Aged Enzyme Still in Its Prime: Recent Advances in the Field of Cutinases

Cutinases are α/β hydrolases, and their role in nature is the degradation of cutin. Such enzymes are usually produced by phytopathogenic microorganisms in order to penetrate their hosts. The first focused studies on cutinases started around 50 years ago. Since then, numerous cutinases have been isolated and characterized, aiming at the elucidation of their structure–function relations. Our deeper understanding of cutinases determines the applications by which they could be utilized; from food processing and detergents, to ester synthesis and polymerizations. However, cutinases are mainly efficient in the degradation of polyesters, a natural function. Therefore, these enzymes have been successfully applied for the biodegradation of plastics, as well as for the delicate superficial hydrolysis of polymeric materials prior to their functionalization. Even though research on this family of enzymes essentially began five decades ago, they are still involved in many reports; novel enzymes are being discovered, and new fields of applications arise, leading to numerous related publications per year. Perhaps the future of cutinases lies in their evolved descendants, such as polyesterases, and particularly PETases. The present article reviews the biochemical and structural characteristics of cutinases and cutinase-like hydrolases, and their applications in the field of bioremediation and biocatalysis.

Three New Cutinases from the Yeast Arxula adeninivorans That Are Suitable for Biotechnological Applications

The genes ACUT1, ACUT2, and ACUT3, encoding cutinases, were selected from the genomic DNA of Arxula adeninivorans LS3. The alignment of the amino acid sequences of these cutinases with those of other cutinases or cutinase-like enzymes from different fungi showed that they all had a catalytic S-D-H triad with a conserved G-Y-S-Q-G domain. All three genes were overexpressed in A. adeninivorans using the strong constitutive TEF1 promoter. Recombinant 6× His (6h)-tagged cutinase 1 protein (p) from A. adeninivorans LS3 (Acut1-6hp), Acut2-6hp, and Acut3-6hp were produced and purified by immobilized-metal ion affinity chromatography and biochemically characterized using p-nitrophenyl butyrate as the substrate for standard activity tests. All three enzymes from A. adeninivorans were active from pH 4.5 to 6.5 and from 20 to 30°C. They were shown to be unstable under optimal reaction conditions but could be stabilized using organic solvents, such as polyethylene glycol 200 (PEG 200), isopropanol, ethanol, or acetone. PEG 200 (50%, vol/vol) was found to be the best stabilizing agent for all of the cutinases, and acetone greatly increased the half-life and enzyme activity (up to 300% for Acut3-6hp). The substrate spectra for Acut1-6hp, Acut2-6hp, and Acut3-6hp were quite similar, with the highest activity being for short-chain fatty acid esters of p-nitrophenol and glycerol. Additionally, they were found to have polycaprolactone degradation activity and cutinolytic activity against cutin from apple peel. The activity was compared with that of the 6× His-tagged cutinase from Fusarium solani f. sp. pisi (FsCut-6hp), also expressed in A. adeninivorans, as a positive control. A fed-batch cultivation of the best Acut2-6hp-producing strain, A. adeninivorans G1212/YRC102-ACUT2-6H, was performed and showed that very high activities of 1,064 U ml(-1) could be achieved even with a nonoptimized cultivation procedure.

Screening of nonfilamentous bacteria for production of cutin-degrading enzymes

Two hundred thirty-two nonfilamentous bacterial strains, including saprophytes, plant pathogens, and opportunistic plant and human pathogens, were screened for the ability to produce cutinases (cutin-degrading esterases). Initially, esterase activity of culture filtrates of strains grown in nutrient broth-yeast extract medium supplemented with 0.4% apple or tomato cutin was determined by a spectrophotometric assay utilizing the model substrate p-nitrophenyl butyrate. The culture filtrates of the 10 Pseudomonas aeruginosa strains tested exhibited the highest esterase activity, with values of >500 nmol/min/ml. Of these 10 strains, 3 (K799, 1499A, and DAR41352) demonstrated significant induction (10-fold or above) of esterase activity by addition of cutin to nutrient broth-yeast extract medium. The ability of culture filtrates of the three strains to cause release of apple cutin monomers was confirmed by a novel high-performance liquid chromatography technique. Monomer identification was confirmed by gas chromatography-mass spectroscopy analyses. Addition of the nonionic detergent n-octylglucoside stimulated cutinase activity of culture filtrates from strains K799 and DAR41352, but not that of filtrates from strain 1499A. Time course studies in nutrient broth-yeast extract medium supplemented with apple cutin indicated maximal levels of cutinase in the culture fluids after cultures entered stationary phase. Incubation temperatures below the optimal temperature for growth (37 degrees C) led to maximal production of cutinase.

Identification and characterization of bacterial cutinase

Cutinase, which exists in both fungi and bacteria, catalyzes the cleavage of the ester bonds of cutin. Fungal cutinases have been extensively studied, however, reports on bacterial cutinases have been limited due to the lack of knowledge concerning the identity of their open reading frames. In the present study, the cutinase from Thermobifida fusca was induced by cutin and purified to homogeneity by following p-nitrophenyl butyrate hydrolyzing activity. Peptide mass fingerprinting analysis of the wild-type enzyme matched two proteins, Tfu_0883 and Tfu_0882, which are 93% identical in sequence. Both proteins were cloned and overexpressed in their mature form. Recombinant Tfu_0883 and Tfu_0882 display very similar enzymatic properties and were confirmed to be cutinases by their capability to hydrolyze the ester bonds of cutin. Comparative characterization of Fusarium solani pisi and T. fusca cutinases indicated that they have similar substrate specificity and catalytic properties except that the T. fusca enzymes are thermally more stable. Homology modeling revealed that T. fusca cutinases adopt an alpha/beta-hydrolase fold that exhibits both similarities and variations from the fungal cutinase structure. A serine hydrolase catalytic mechanism involving a Ser(170)-His(248)-Asp(216) (Tfu_0883 numbering) catalytic triad was supported by active site-directed inhibition studies and mutational analyses. This is the first report of cutinase encoding genes from bacterial sources.

Identification, cloning and characterization of a GDSL lipase secreted into the nectar of Jacaranda mimosifolia

The presence and function of several proteins secreted into floral nectars has been described in recent years. Here we report the presence of at least eight distinct proteins secreted into the floral nectar of the tropical tree Jacaranda mimosifolia (Bignoniaceae). Steps were initiated to identify and characterize these proteins in order to determine potential functions. The N-terminal sequence of the major Jacaranda nectar protein, JNP1, at 43 kDa contained similarity with members of the plant GDSL lipase/esterase gene family. Based upon this sequence, a full-length cDNA was isolated and predicted to encode a mature protein of 339 amino acids with a molecular mass of 37 kDa. Both raw nectar and heterologously expressed JNP1 displayed lipase/esterase activities. Interestingly, J. mimosifolia flowers produce an opaque, white colored nectar containing spherical, lipophilic particles approximately 5 microm in diameter and smaller. GS-MS analysis also identified the accumulation of free fatty acids within the nectar. It is proposed that JNP1 hydrolyzes Jacaranda nectar lipids with the concomitant release of free fatty acids. Potential functions of JNP1 in relation to pollinator attraction and prevention of microbial growth within nectar are briefly discussed.

Enhanced cutinase production withThermobifida fusca by two-stage pH control strategy

A mutant of Thermobifida fusca ATCC 27730 was used for cutinase production. Acetate was the most suitable carbon source for cell growth and cutinase production compared with others. The pH was one of the most important factors affecting cutinase yield and productivity. Batch cutinase fermentations by mutant Thermobifida fusca WSH04 at various pH values ranging from 7.0 to 7.9 were studied. Based on the effects of different pH values on the specific cell growth rate and specific cutinase formation rate, a two-stage pH control strategy was developed, in which the pH was set at 7.3 for the first 20 h, and switched to 7.6 afterwards. By applying this two-stage pH control strategy for cutinase fermentation, the maximal cutinase activity reached 19.8 U/mL.

Identification of novel enzymes with different hydrolytic activities by metagenome expression cloning

Metagenome cloning has become a powerful tool to exploit the biocatalytic potential of microbial communities for the discovery of novel biocatalysts. In a novel variant of direct expression cloning, metagenomic DNA was isolated from compost by a modified direct lysis method, purified by size exclusion chromatography and cloned into an expression vector allowing bidirectional transcription. Transformation of Escherichia coli DH5alpha resulted in a metagenomic expression library with an average insert size of 3.2 kb. To estimate the functional diversity of the constructed library, it was screened by different approaches based on functional heterologous expression. A large number of active clones were identified, including lipolytic enzymes, amylases, phosphatases and dioxygenases. Molecular analysis of one important class of industrial biocatalysts, the lipolytic enzymes, confirmed the novelty and dissimilarity of all recovered genes, which exhibited only limited similarity to known enzymes. Equally, the novelty of another three genes encoding phosphatase or dioxygenase activity, respectively, was shown. These results demonstrate the suitability of this direct cloning approach, which comprised a dual-orientation expression vector and a simple one-step DNA purification method, for the efficient discovery of numerous active novel clones. By this means it provides an efficient way for the rapid generation of large libraries of hitherto unknown enzyme candidates which could be screened for different specific target reactions.

The Interaction of Fusarium solani pisi Cutinase with Long Chain Spin Label Esters

We here present a study of the interaction between the Fusarium solani pisi cutinase mutant S120A and spin-labeled 4,4-dimethyloxazoline-N-oxyl-(DOXYL)-stearoyl-glycerol substrates in a micellar system. The interaction is detected by NMR measuring changes in chemical shift for 1H and 15N as well as relaxation parameters for backbone 1H (T1) and 15N (T1, T2) atoms as well as for side chain methyl groups 1H (T1). The detected interaction shows a weak binding of cutinase to the lipid micelles. Structural and mobility changes are located inside and around the active site, its flanking loops, and the oxyanion hole, respectively. Relaxation changes in the amino acid pairs Ser 92, Ala 93 and Thr 173, Gly 174 positioned at the edge of each of the active site flanking loops make these residues prime candidates for hinges, allowing for structural rearrangement during substrate binding. The cutinase mutant S120A used carries a 15 amino acid pro-peptide; the significance of this pro-peptide was so far undetermined. We show here that the pro-peptide is affected by the presence of the micellar substrate. Relaxation enhancements indicative of spatial proximity between the DOXYL group in the lipid chain and some hydrophobic residues surrounding the active site could be found.

Novel hydrophobic surface binding protein, HsbA, produced by Aspergillus oryzae

Hydrophobic surface binding protein A (HsbA) is a secreted protein (14.5 kDa) isolated from the culture broth of Aspergillus oryzae RIB40 grown in a medium containing polybutylene succinate-co-adipate (PBSA) as a sole carbon source. We purified HsbA from the culture broth and determined its N-terminal amino acid sequence. We found a DNA sequence encoding a protein whose N terminus matched that of purified HsbA in the A. ozyzae genomic sequence. We cloned the hsbA genomic DNA and cDNA from A. oryzae and constructed a recombinant A. oryzae strain highly expressing hsbA. Orthologues of HsbA were present in animal pathogenic and entomopathogenic fungi. Heterologously synthesized HsbA was purified and biochemically characterized. Although the HsbA amino acid sequence suggests that HsbA may be hydrophilic, HsbA adsorbed to hydrophobic PBSA surfaces in the presence of NaCl or CaCl(2). When HsbA was adsorbed on the hydrophobic PBSA surfaces, it promoted PBSA degradation via the CutL1 polyesterase. CutL1 interacts directly with HsbA attached to the hydrophobic QCM electrode surface. These results suggest that when HsbA is adsorbed onto the PBSA surface, it recruits CutL1, and that when CutL1 is accumulated on the PBSA surface, it stimulates PBSA degradation. We previously reported that when the A. oryzae hydrophobin RolA is bound to PBSA surfaces, it too specifically recruits CutL1. Since HsbA is not a hydrophobin, A. oryzae may use several types of proteins to recruit lytic enzymes to the surface of hydrophobic solid materials and promote their degradation.

Mineralization of 14C-labelled synthetic lignin and extracellular enzyme activities of the wood-colonizing ascomycetes Xylaria hypoxylon and Xylaria polymorpha

Two wood-dwelling ascomycetes, Xylaria hypoxylon and Xylaria polymorpha, were isolated from rotting beech wood. Lignin degradation was studied following the mineralization of a synthetic [formula: see text]-labelled lignin in solid and liquid media. Approximately 9% of the synthetic lignin was mineralized by X. polymorpha during the growth on beech wood meal, and the major fraction (65.5%) was polymerized into water- and dioxan-insoluble material. Both fungi produced laccase (up to 1,200 U l-1) in an agitated complex medium based on tomato juice; peroxidase activity (<80 U l-1) was only detected for X. polymorpha in soybean meal suspension. The enzymatic attack of X. polymorpha on beech wood resulted in the formation of three fractions of water-soluble lignocellulose fragments with molecular masses of 200, 30 (major fraction) and 3 kDa, as demonstrated by high-performance size exclusion chromatography. This fragment pattern differs considerably from that of the white-rot fungus Bjerkandera adusta, which preferentially released smaller lignocellulose fragments (0.8 kDa). The finding that X. polymorpha produced large lignocellulose fragments, along with the fact that high levels of hydrolytic enzymes (esterase 630 U l-1, xylanase 120 U l-1) were detected, indicates the cleavage of bonds between the lignin and hemicellulose moieties.

Characterization of the antifungal activity on Botrytis cinerea of the natural diterpenoids kaurenoic acid and 3beta-hydroxy-kaurenoic acid

The antifungal activity on Botrytis cinerea of the diterpenoids 3beta-hydroxy-kaurenoic acid and kaurenoic acid, obtained from the resinous exudates of Pseudognaphalium vira vira, was determined. 3beta-Hydroxy-kaurenoic acid reduced the mycelial growth of B. cinerea in solid and liquid media. Additionally, the damage produced by the fungus on the surface of tomato leaves in the presence of the diterpenoids was evaluated. A higher protective effect was observed in the presence of the hydroxylated diterpene. On the other hand, the effect of the diterpenoids on the production of enzymes that participate in the plant infection by B. cinerea was analyzed. p-Nitrophenylbutyrate esterase production was induced by both diterpenoids, whereas laccase production was only induced by the hydroxylated diterpene. In the study of the mechanism of action of these compounds, it was determined that 3beta-hydroxy-kaurenoic acid would produce permeabilization of the cell membrane of B. cinerea.

Polyesters in higher plants

Polyesters occur in higher plants as the structural component of the cuticle that covers the aerial parts of plants. This insoluble polymer, called cutin, attached to the epidermal cell walls is composed of interesterified hydroxy and hydroxy epoxy fatty acids. The most common chief monomers are 10,16-dihydroxy C16 acid, 18-hydroxy-9,10 epoxy C18 acid, and 9,10,18-trihydroxy C18 acid. These monomers are produced in the epidermal cells by omega hydroxylation, in-chain hydroxylation, epoxidation catalyzed by P450-type mixed function oxidase, and epoxide hydration. The monomer acyl groups are transferred to hydroxyl groups in the growing polymer at the extracellular location. The other type of polyester found in the plants is suberin, a polymeric material deposited in the cell walls of a layer or two of cells when a plant needs to erect a barrier as a result of physical or biological stress from the environment, or during development. Suberin is composed of aromatic domains derived from cinnamic acid, and aliphatic polyester domains derived from C16 and C18 cellular fatty acids and their elongation products. The polyesters can be hydrolyzed by pancreatic lipase and cutinase, a polyesterase produced by bacteria and fungi. Catalysis by cutinase involves the active serine catalytic triad. The major function of the polyester in plants is as a protective barrier against physical, chemical, and biological factors in the environment, including pathogens. Transcriptional regulation of cutinase gene in fungal pathogens is being elucidated at a molecular level. The polyesters present in agricultural waste may be used to produce high value polymers, and genetic engineering might be used to produce large quantities of such polymers in plants.

Induction of cutinolytic esterase activity during saprophytic growth of cucurbit pathogens, Fusarium solani f. sp. cucurbitae races one and two (Nectria haematococca MPI and MPV, respectively)

Cutins from fruit of Cucurbita maxima and Cucurbita moschata cultivars, apple and a C(16) alcohol (hexadecanol) were used to induce cutinolytic esterase activity during saprophytic growth of strains of the two cucurbit pathogens, Fusarium solani f. sp. cucurbitae, race 1 (Nectria haematococca mating population (MPI) and F. solani f. sp. cucurbitae, race 2 (MPV). Four strains of MPV and 11 strains of MPI were were included in the study. Although we were primarily interested in the two cucurbit pathogens (MPI and MPV), six strains of the pea pathogen F. solani f. sp. pisi (MPVI) were included to provide a comparison since most of the knowledge on cutinase activity in N. haematococca has come from a study of that group. Cutinolytic esterase was induced in all strains from both MPV and MPVI but was not detected in any of the 11 strains from MPI regardless of the induction conditions. The amount of cutinolytic esterase activity induced in the MPV strains differed according to the strain and both the source and the amount of cutin used in the induction medium. Information on the influence of cutin source and pH on the induction of cutinolytic esterase activity during saprophytic growth of strains from MPV demonstrates that the gene is regulated differently from that in MPVI.

Composition and enzymatic activity of the extracellular matrix secreted by germlings of botrytis cinerea

Germlings of Botrytis cinerea, an important fungal pathogen of plants, produce an extracellular matrix (ECM), or ensheathing film, that serves, in part, in their attachment (R. P. Doss, et al., Appl. Environ. Microbiol. 61:260-265, 1995). The composition of this film has been ascertained by using samples obtained by growing germlings on a glass surface, removing the fungal mycelium by vigorous washing, and collecting the tightly attached film by scraping the substratum with a razor blade. Slightly over half of the dry weight of the ECM was found to be carbohydrates (about 20%), proteins (about 28%), and lipids (about 6%). Hydrolysis of the carbohydrate portion of the ECM revealed that glucose was the most prominent monosaccharide present, comprising about 60% of the total monosaccharides. Also present were mannose (about 35%) and myo-inositol (about 5%). The proteinaceous fraction of the ECM was made up of a number of polypeptides separable by polyacrylamide gel electrophoresis. The lipid fraction of the ECM, analyzed by thin-layer chromatography, was made up of several simple lipid components, including free fatty acid, mono- and triacylglycerol, wax ester, fatty alcohol, and several unidentified components. No complex lipids were detected. Isolated ECM exhibited polygalacturonase and laccase activity and was able to catalyze the hydrolysis of p-nitrophenyl butyrate, a model substrate for assessing cutinase activity. Cellulase, pectin lyase, and pectin methyl esterase activities were noted with both heated and unheated ECM preparations. Proteinase activity was not detected.

Effect of disruption of a cutinase gene (cutA) on virulence and tissue specificity of Fusarium solani f. sp. cucurbitae race 2 toward Cucurbita maxima and C. moschata

A 3.9-kb genomic DNA fragment from the cucurbit pathogen Fusarium solani f. sp. cucurbitae race 2 was cloned. Sequence analysis revealed an open reading frame of 690 nucleotides interrupted by a single 51-bp intron. The nucleotide and predicted amino acid sequences showed 92 and 98% identity, respectively, to those of the cutA gene of the pea pathogen F. solani f. sp. pisi. A gene replacement vector was constructed and used to generate cutA- mutants that were detected with a polymerase chain reaction (PCR) assay. Seventy-one cutA- mutants were identified among the 416 transformants screened. Vector integration was assessed by Southern analysis in 23 of these mutants. PCR and Southern analysis data showed the level of homologous integration was 14%. Disruption of the cutA locus in mutants was confirmed by RNA gel blot hybridization. Neither virulence on Cucurbita maxima cv. Delica at any of six different inoculum concentrations, nor pathogenicity on intact fruit of four different species or cultivars of cucurbit or hypocotyl tissue of C. maxima cv. Crown, was found to be affected by disruption of the cutA gene.

Cloning and expression of the cutinase A gene of Botrytis cinerea

Cutinase of Botrytis cinerea has been suggested to play an important role in penetration of host tissues. A protein fraction with cutin hydrolyzing activity was purified from culture filtrates of B. cinerea induced for cutinase activity. An 18-kDa protein in this fraction was identified as cutinase and the corresponding gene cutA was cloned. The gene is present in a single copy in the genome of B. cinerea strain SAS56 and its predicted amino acid sequence shows significant homology (31 to 35% identity) to other fungal cutinases. RNA blot analysis showed that cutA mRNA is induced in vitro by the cutin monomer 16-hydroxyhexadecanoic acid and repressed by glucose. The expression of cutA during infection of tomato leaves is low during early phases of infection, but high when the fungus has colonized the leaf and starts to sporulate.

Fusarium polycaprolactone depolymerase is cutinase

Polycaprolactone (PCL), a synthetic polyester, is degraded by a variety of microorganisms, including some phytopathogens. Many phytopathogens secrete cutinase, a serine hydrolase that degrades cutin, the structural polymer of the plant cuticle. We compared wild-type strains and a cutinase-negative gene replacement mutant strain of Fusarium solani f. sp. pisi (D. J. Stahl and W. Schäfer, Plant Cell 4:621-629, 1992) and a wild-type strain of Fusarium moniliforme to show that Fusarium cutinase is a PCL depolymerase. The wild-type strains, but not the mutant strain, (i) degraded PCL and used it as a source of carbon and energy, (ii) showed induction of secreted PCL depolymerase and an esterase activity of cutinase when grown in the presence of cutin, and (iii) showed induction of PCL depolymerase and an esterase activity of cutinase when grown in the presence of a hydrolysate of PCL, which contains PCL oligomers that are structurally similar to the natural inducers of cutinase. These results together with other details of regulation and conditions for optimal enzyme activity indicate that the Fusarium PCL depolymerase, required for degradation and utilization of PCL, is cutinase.

Structure of the cutinase gene and detection of promoter activity in the 5'-flanking region by fungal transformation

The cutinase gene from Fusarium solani f. sp. pisi (Nectria hematococa) was cloned and sequenced. Sau3A fragments of genomic DNA from the fungus were cloned in a lambda Charon 35 vector. When restriction fragments generated from the inserts were screened with 5' and 3' probes from cutinase cDNA, a 5.5-kilobase SstI fragment hybridized with both probes, suggesting the presence of the entire cutinase gene. A 2,818-base pair segment was sequenced, revealing a 690-nucleotide open reading frame that was identical to that found in the cutinase cDNA with a single 51-base pair intron. Transformation vectors were constructed containing a promoterless gene for hygromycin resistance, which was translationally fused to flanking sequences of the cutinase gene. When protoplasts and mycelia were transformed with these vectors, hygromycin-resistant transformants were obtained. Successful transformation was assessed by Southern blot analysis by using radiolabeled probes for the hygromycin resistance gene and the putative promoter. The results of Southern blot analysis indicated that the plasmid had integrated into the Fusarium genome and that the antibiotic resistance was a manifestation of the promoter activity of the cutinase flanking sequences. Transformation of Colletotrichum capsici with the same construct confirmed the promoter activity of the flanking region and the integration of the foreign DNA. Transformation and deletion analysis showed that promoter activity resided within the 360 nucleotides immediately 5' to the cutinase initiation codon.

Extracellular Enzyme Activities during Lignocellulose Degradation by Streptomyces spp.: A Comparative Study of Wild-Type and Genetically Manipulated Strains

The wild-type ligninolytic actinomycete Streptomyces viridosporus T7A and two genetically manipulated strains with enhanced abilities to produce a water-soluble lignin degradation intermediate, an acid-precipitable polymeric lignin (APPL), were grown on lignocellulose in solid-state fermentation cultures. Culture filtrates were periodically collected, analyzed for APPL, and assayed for extracellular lignocellulose-catabolizing enzyme activities. Isoenzymes were analyzed by polyacrylamide gel electrophoresis and activity staining on the gels. Two APPL-overproducing strains, UV irradiation mutant T7A-81 and protoplast fusion recombinant SR-10, had higher and longer persisting peroxidase, esterase, and endoglucanase activities than did the wild-type strain T7A. Results implicated one or more of these enzymes in lignin solubilization. Only mutant T7A-81 had higher xylanase activity than the wild type. The peroxidase was induced by both lignocellulose and APPL. This extracellular enzyme has some similarities to previously described ligninases in fungi. This is the first report of such an enzyme in Streptomyces spp. Four peroxidase isozymes were present, and all catalyzed the oxidation of 3,4-dihydroxyphenylalanine, while one also catalyzed hydrogen peroxide-dependent oxidation of homoprotocatechuic acid and caffeic acid. Three constitutive esterase isozymes were produced which differed in substrate specificity toward α-naphthyl acetate and α-naphthyl butyrate. Three endoglucanase bands, which also exhibited a low level of xylanase activity, were identified on polyacrylamide gels as was one xylanase-specific band. There were no major differences in the isoenzymes produced by the different strains. The probable role of each enzyme in lignocellulose degradation is discussed.

Purification and characterization of a novel extracellular esterase from pathogenic Streptomyces scabies that is inducible by zinc

Native polyacrylamide gels of extracellular proteins produced by several Streptomyces isolates grown with suberin were assayed in situ for esterase activity. Two pathogenic isolates of Streptomyces scabies from different geographical regions were found to produce a similar esterase activity that was not produced by nonpathogenic strains. After treatment with EDTA, suberin no longer induced esterase production. Expression was restored when EDTA-treated suberin was supplemented with zinc. The optimal concentration of zinc required for esterase production was 2 microM. This esterase was purified from one of the pathogenic isolates and characterized. The enzyme was 38,000 daltons when determined by gel filtration on Sephadex G-100 and 36,000 daltons when determined by denaturing polyacrylamide gel electrophoresis. The esterase showed maximal activity in sodium phosphate buffer above pH 8.0, was stable to temperatures of up to 60 degrees C, and had an apparent Km of 125 microM p-nitrophenyl butyrate.

Discovery of a cutinase-producing Pseudomonas sp. cohabiting with an apparently nitrogen-fixing Corynebacterium sp. in the phyllosphere

A phyllospheric bacterial culture, previously reported to partially replace nitrogen fertilizer (B. R. Patti and A. K. Chandra, Plant Soil 61:419-427, 1981) was found to contain a fluorescent pseudomonas which was identified as Pseudomonas putida and a Corynebacterium sp. The P. putida isolate was found to produce an extracellular cutinase when grown in a medium containing cutin, the polyester structural component of plant cuticle. The Corynebacterium sp. grew on nitrogen-free medium but could not produce cutinase under any induction conditions tested, whereas P. putida could not grow on nitrogen-free medium. When cocultured with the nitrogen-fixing Corynebacterium sp., the P. putida isolate grew in a nitrogen-free medium, suggesting that the former provided fixed N2 for the latter. These results suggest that the two species coexist on the plant surface, with one providing carbon and the other providing reduced nitrogen for their growth. The presence of cutin in the medium induced cutinase production by P. putida. However, unlike the previously studied fungal systems, cutin hydrolysate did not induce cutinase. Thin-layer chromatographic analysis of the products released from labeled apple fruit cutin showed that the extracellular enzyme released all classes of cutin monomers. This enzyme also catalyzed hydrolysis of the model ester substrates, p-nitrophenyl esters of fatty acids, and optimal conditions were determined for a spectrophotometric assay with p-nitrophenyl butyrate as the substrate. It did not hydrolyze triacyl glycerols, indicating that the cutinase activity was not due to a nonspecific lipase. It showed a broad pH optimum between 8.0 and 10.5 with 3H-labeled apple cutin as the substrate.(ABSTRACT TRUNCATED AT 250 WORDS)

Isolation of a Fusarium solani mutant reduced in cutinase activity and virulence

Fusarium solani isolate T-8 produces an extracellular enzyme, cutinase, which catalyzes the degradation of cutin in the plant cuticle. Cutinase activity can be measured by the hydrolysis of either the artifical substrate, p-nitrophenylbutyrate (PNB), or radioactive cutin containing [14C]palmitic acid. In the present study, the culture filtrate contained basal levels of cutinase when T-8 was grown on acetate as a sole source of carbon. After mutagenesis, a cutinase-defective mutant (PNB-1) was identified by screening acetate-grown colonies for a loss of PNBase activity. The mutant possessed an 80 to 90% reduction in cutinase activity when grown for 3 to 5 days on acetate- or cutin-containing medium. Induction of cutinase by cutin or hydrolyzed cutin after growth on glucose medium was similarly reduced. Kinetic analysis indicated that cutinase from the mutant possessed a near normal Km for PNB and a 92% reduction in Vmax. Fluorography and Western blotting of 15% sodium dodecyl sulfate-polyacrylamide gels of separated 35S-labeled proteins from cutin induction medium revealed that in the mutant the 22,000-molecular-weight band corresponding to cutinase was reduced approximately 85%. The virulence of the mutant in a pea stem bioassay was decreased by 55% and was restored to nearly the parental level by the addition of purified cutinase. The data suggest that the mutant synthesizes reduced quantities of a functional and immunoreactive cutinase enzyme and that cutinase plays a critical role in infection. The PNB1 mutation may be within a regulatory gene or a promoter for cutinase.

Mechanism of action of cutinase: chemical modification of the catalytic triad characteristic for serine hydrolases

Cutinase from Fusarium solani f. sp. pisi was inhibited by diisopropyl fluorophosphate and phenylboronic acid, indicating the involvement of an active serine residue in enzyme catalysis. Quantitation of the number of phosphorylated serines showed that modification of one residue resulted in complete loss of enzyme activity. One essential histidine residue was modified with diethyl pyrocarbonate. This residue was buried in native cutinase and became accessible to chemical modification only after unfolding of the enzyme by sodium dodecyl sulfate. The modification of carboxyl groups with 1-ethyl-3-[3-(dimethylamino)propyl]carbodiimide in the absence of sodium dodecyl sulfate did not result in inactivation of the enzyme; however, such modifications in the presence of sodium dodecyl sulfate resulted in complete loss of enzyme activity. The number of residues modified was determined by incorporation of [14C]glycine ethyl ester. Modification of cutinase in the absence of sodium dodecyl sulfate and subsequent unfolding of the enzyme with detergent in the presence of radioactive glycine ester showed that one buried carboxyl group per molecule of cutinase resulted in complete inactivation of the enzyme. Three additional peripheral carboxyl groups were modified in the presence of sodium dodecyl sulfate. Carbethoxylation of the essential histidine and subsequent incubation with the esterase substrate p-nitrophenyl [1-14C]acetate revealed that carbethoxycutinase was about 10(5) times less active than the untreated enzyme. The acyl-enzyme intermediate was stabilized under these conditions and was isolated by gel permeation chromatography. The results of the present chemical modification study indicate that catalysis by cutinase involves the catalytic triad and an acyl-enzyme intermediate, both characteristic for serine proteases.

Biopolyester Membranes of Plants: Cutin and Suberin

Cutin, a biopolyester composed of hydroxy and epoxy fatty acids, is the barrier between the aerial parts of higher plants and their environment. Suberin a polymer containing aromatics and polyesters, functions as a barrier in underground parts, wound surfaces, and a variety of internal organs. The composition and probable structure of these polymers are discussed. The biosynthesis of the hydroxy, epoxy, and dicarboxylic acids of the polyesters from the common cellular fatty acids is elucidated. An extracellular enzyme transfers the hydroxy and epoxyacyl moieties from their coenzyme A derivatives to the growing polyester. The enzymes acting in the biodegradation of the polyesters have been isolated from fungi, pollen, and mammals and characterized. The function and possible practical implications of these polyester barriers are briefly discussed.

Structural studies on cutinase, a glycoprotein containing novel amino acids and glucuronic acid amide at the N terminus

Cutinase I and cutinase II, two extracellular enzymes produced by Fusarium solani pisi, were shown to be glycoproteins containing 4.3% and 5.1% carbohydrates, respectively. Upon treatment with alkali both enzymes generated chromophores which absorbed at 241 nm. Treatment of both proteins with alkaline NaB3H4 gave labeled protein and labeled monosaccharides. Hydrolysis of the labeled protein followed by chromatographic and enzymatic analyses of the products showed that alanine, 2-aminobutyrate, phenylalanine, tyrosine and L-gulonic acid accounted for nearly all of the 3H contained in the protein. The four labeled amino acids were shown to be 1:1 mixture of D and L isomers and 3H was nearly equally distributed between alpha and beta positions in each amino acid. The N-terminal amino group of cutinase I did not react with either phenylisothiocyanate of dansyl chloride. This amino group was suggested to be in amide linkage with glucuronic acid because upon treatment of the protein with neutral NaB3H4, gulonic acid attached to the protein became labeled and only gulonic acid was labeled when the protein was deglycosylated with HF prior to alkaline NaB3H4 treatment. Furthermore, N-gulonyglycine was isolated from the pronase digest of the labeled protein. Chromatographic identification and quantification of the labeled carbohydrates released from cutinase I by alkaline NaB3H4 showed that one mole of cutinase I has one mole each of mannose, arabinose, N-acetylglucosamine, and glucuronic acid O-glycosidically linked to serine, threonine, beta-hydroxyphenylalanine, and beta-hydroxytyrosine. In addition, the N-terminal glycine is in amide linkage with glucuronic acid. Since almost identical experimental results were obtained with cutinase II this protein is also suggested to have the same structural features as those suggested above for cutinase I.