Divalent cation-sensitive pores formed by natural and synthetic melittin and by Triton X-100

Leakage and Rupture of Lipid Membranes by Charged Polymers and Nanoparticles

Understanding and controlling the interactions between lipid membranes and nanomaterials are important for drug delivery, toxicity studies, and sensing. In the literature, the perception is that cationic nanomaterials can damage lipid membranes, although some reports suggest the opposite. In this work, instead of using different materials for testing the effect of charge, we used the same material and adjusted the pH. A total of three types of liposomes including zwitterionic phosphocholine (PC) and negatively charged phosphoserine (PS) with saturated and unsaturated tails were tested with three types of metal oxide nanoparticles and two types of cationic polymers. A calcein leakage assay was used to probe membrane leakage. We found that cationic polymers had very little advantage for leaking PC liposomes. On the other hand, the PS liposomes were leaked by TiO₂ nanoparticles regardless of their charge tuned by pH. ZnO with a high pK_a value was studied in detail, and it only leaked the 1,2-dioleoyl-sn-glycero-3-phosphocholine liposomes at low pH when ZnO was positively charged, but leakage was inhibited by adding NaCl to weaken electrostatic attraction and by capping ZnO. In addition, dissolution of adsorbed ZnO also caused leakage, suggesting that adsorption and desorption induced reversible lipid phase transitions. Overall, the interaction strength was a key factor for leakage. Leakage does not necessarily mean membrane damage, and cryogenic transmission electron microscopy was used to study membrane integrity. Previously observed cationic polymer/nanoparticle-induced damages in supported membranes could be due to electrostatic attraction between the polymers and the underlying negatively charged supporting surface.

Separation and Detection of Escherichia coli and Saccharomyces cerevisiae Using a Microfluidic Device Integrated with an Optical Fibre

This paper describes the development of an integrated system using a dry film resistant (DFR) microfluidic channel consisting of pulsed field dielectrophoretic field-flow-fractionation (DEP-FFF) separation and optical detection. The prototype chip employs the pulse DEP-FFF concept to separate the cells (Escherichia coli and Saccharomyces cerevisiae) from a continuous flow, and the rate of release of the cells was measured. The separation experiments were conducted by changing the pulsing time over a pulsing time range of 2⁻24 s and a flow rate range of 1.2⁻9.6 μ L min - 1 . The frequency and voltage were set to a constant value of 1 M Hz and 14 V pk-pk, respectively. After cell sorting, the particles pass the optical fibre, and the incident light is scattered (or absorbed), thus, reducing the intensity of the transmitted light. The change in light level is measured by a spectrophotometer and recorded as an absorbance spectrum. The results revealed that, generally, the flow rate and pulsing time influenced the separation of E. coli and S. cerevisiae. It was found that E. coli had the highest rate of release, followed by S. cerevisiae. In this investigation, the developed integrated chip-in-a lab has enabled two microorganisms of different cell dielectric properties and particle size to be separated and subsequently detected using unique optical properties. Optimum separation between these two microorganisms could be obtained using a longer pulsing time of 12 s and a faster flow rate of 9.6 μ L min - 1 at a constant frequency, voltage, and a low conductivity.

Honey bee (Apis mellifera) venom induces AIM2 inflammasome activation in human keratinocytes

BACKGROUND

Following allergen exposure, cytokines and other pro-inflammatory signals play an important role in the immunological cascade leading to allergic sensitization. Inflammasomes sense exogenous and endogenous danger signals and trigger IL-1β and IL-18 activation which in turn shape Th2 responses. Honey bee venom (BV) allergies are very common; however, the local inflammatory cascade leading to the initiation of allergic sensitization is poorly understood. In this study, the local inflammatory cascades in skin after exposure to BV were investigated.

METHODS

The mechanisms of inflammasome activation in human skin and in cultured keratinocytes upon BV exposure were analyzed by ELISA, Western blot, flow cytometry, siRNA techniques, and immunofluorescence.

RESULTS

In an ex vivo bee sting model, BV induced IL-1β release suggesting the activation of inflammasomes. Indeed, in cultured keratinocytes, the BV component melittin triggered IL-1β and IL-18 release via the AIM2 inflammasome. AIM2 is a cytosolic DNA receptor, and mitochondrial as well as genomic DNA was detected in the cytosol of melittin-treated keratinocytes as triggers of inflammasome activation. As a mechanism, melittin mediated destruction of mitochondrial membranes leading to the leakage of mitochondrial DNA into the cytosolic compartment.

CONCLUSION

These data suggest that upon BV exposure, keratinocytes are involved in an innate immune response by the activation of the AIM2 inflammasome and subsequent IL-1β and IL-18 release triggered by endogenous DNA. As IL-1β and IL-18 are involved in Th2- and IgE-mediated immune reactions, these results could add to the understanding of the role of the tissue microenvironment to subsequent allergic responses.

Detergent-like actions of linear amphipathic cationic antimicrobial peptides

Antimicrobial peptides have raised much interest as pathogens become resistant against conventional antibiotics. We review biophysical studies that have been performed to better understand the interactions of linear amphipathic cationic peptides such as magainins, cecropins, dermaseptin, delta-lysin or melittin. The amphipathic character of these peptides and their interactions with membranes resemble the properties of detergent molecules and analogies between membrane-active peptide and detergents are presented. Several models have been suggested to explain the pore-forming, membrane-lytic and antibiotic activities of these peptides. Here we suggest that these might be 'special cases' within complicated phase diagrams describing the morphological plasticity of peptide/lipid supramolecular assemblies.

Dielectrophoresis-Based Sample Handling in General-Purpose Programmable Diagnostic Instruments

As the molecular origins of disease are better understood, the need for affordable, rapid, and automated technologies that enable microscale molecular diagnostics has become apparent. Widespread use of microsystems that perform sample preparation and molecular analysis could ensure that the benefits of new biomedical discoveries are realized by a maximum number of people, even those in environments lacking any infrastructure. While progress has been made in developing miniaturized diagnostic systems, samples are generally processed off-device using labor-intensive and time-consuming traditional sample preparation methods. We present the concept of an integrated programmable general-purpose sample analysis processor (GSAP) architecture where raw samples are routed to separation and analysis functional blocks contained within a single device. Several dielectrophoresis-based methods that could serve as the foundation for building GSAP functional blocks are reviewed including methods for cell and particle sorting, cell focusing, cell ac impedance analysis, cell lysis, and the manipulation of molecules and reagent droplets.

Two types of ion channel formation of tolaasin, a Pseudomonas peptide toxin

Tolaasin is a peptide toxin produced by Pseudomonas tolaasii and causes brown blotch disease of the cultivated mushrooms. Two types of ion channels were identified by the incorporation of tolaasin into lipid bilayer. The slope conductance of type 1 channel measured in the buffer containing 100 mM KCl was 150 pS with a linear current vs. voltage relationship. The type 2 tolaasin channel had two subconductance states of 300 and 500 pS. Both channels were inhibited by Zn(2+). Ion channel formations of tolaasin were concentration-dependent and single channel currents were successfully obtained at 0.6 unit tolaasin, 15.9 nM. The type 1 channel was obtained more frequently than the type 2 channel and the ratio of their appearance was approximately 4:1, respectively.

The permeability transition pore complex: another view

Mitochondria play a critical role in initiating both apoptotic and necrotic cell death. A major player in this process is the mitochondrial permeability transition pore (MPTP), a non-specific pore, permeant to any molecule of < 1.5 kDa, that opens in the inner mitochondrial membrane under conditions of elevated matrix [Ca(2+)], especially when this is accompanied by oxidative stress and depleted adenine nucleotides. Opening of the MPTP causes massive swelling of mitochondria, rupture of the outer membrane and release of intermembrane components that induce apoptosis. In addition mitochondria become depolarised causing inhibition of oxidative phosphorylation and stimulation of ATP hydrolysis. Pore opening is inhibited by cyclosporin A analogues with the same affinity as they inhibit the peptidyl-prolyl cis-trans isomerase activity of mitochondrial cyclophilin (CyP-D). These data and the observation that different ligands of the adenine nucleotide translocase (ANT) can either stimulate or inhibit pore opening led to the proposal that the MPTP is formed by a Ca-triggered conformational change of the ANT that is facilitated by the binding of CyP-D. Our model is able to explain the mode of action of a wide range of known modulators of the MPTP that exert their effects by changing the binding affinity of the ANT for CyP-D, Ca(2+) or adenine nucleotides. The extensive evidence for this model from our own and other laboratories is presented, including reconstitution studies that demonstrate the minimum configuration of the MPTP to require neither the voltage activated anion channel (VDAC or porin) nor any other outer membrane protein. However, other proteins including Bcl-2, BAX and virus-derived proteins may interact with the ANT to regulate the MPTP. Recent data suggest that oxidative cross-linking of two matrix facing cysteine residues on the ANT (Cys(56) and Cys(159)) plays a key role in regulating the MPTP. Adenine nucleotide binding to the ANT is inhibited by Cys(159) modification whilst oxidation of Cys(56) increases CyP-D binding to the ANT, probably at Pro(61).

Role of phospholipase A(2) and myoendothelial gap junctions in melittin-induced arterial relaxation

We have used preconstricted rings of rabbit superior mesenteric artery to investigate the contribution of phospholipase A(2) and gap junctional communication to endothelium-derived hyperpolarizing factor (EDHF)-type relaxations evoked by melittin, a polypeptide toxin known to mobilize arachidonic acid from the cell membrane. Arachidonyl trifluoromethyl ketone (30 microM), an inhibitor of the Ca(2+)-dependent phospholipase A(2), and Gap 27 (300 microM), a connexin-mimetic peptide which attenuates intercellular communication via gap junctions, both abolished the endothelium-dependent component of EDHF-type responses evoked by melittin in the presence of the NO synthase inhibitor N(G)-nitro-L-arginine methyl ester (L-NAME, 300 microM) and the cyclooxygenase inhibitor indomethacin (10 microM). By contrast, the sulfhydryl agent thimerosal (300 nM), which amplifies EDHF activity, potentiated nitric oxide (NO)/prostanoid-independent relaxations induced by melittin. Neither arachidonyl trifluoromethyl ketone nor thimerosal modulated relaxations evoked by the peptide toxin in the absence of L-NAME and indomethacin. We conclude that melittin evokes EDHF-type relaxations through activation of the endothelial Ca(2+)-dependent phospholipase A(2) followed by the transmission of a chemical and/or electrical signal via myoendothelial gap junctions. This mechanism of vasorelaxation may be negatively regulated by NO.

Clostridium perfringens beta-toxin forms potential-dependent, cation-selective channels in lipid bilayers

Recombinant beta-toxin from Clostridium perfringens type C was found to increase the conductance of bilayer lipid membranes (BLMs) by inducing channel activity. The channels exhibited a distribution of conductances within the range of 10 to 380 pS, with the majority of the channels falling into two categories of conductance at 110 and 60 pS. The radii of beta-toxin pores found for the conductance states of 110 and 60 pS were 12.7 and 11.1 A, respectively. The single channels and the steady-state currents induced by beta-toxin across the BLMs exhibited ideal monovalent cation selectivity. Addition of divalent cations (Zn(2+), Cd(2+), or Mg(2+)) at a concentration of 2 mM increased the rate of beta-toxin insertion into BLMs and the single-channel conductance, while application of 5 mM Zn(2+) to a beta-toxin-induced steady-state current decreased the inward current by approximately 45%. The mutation of arginine 212 of beta-toxin to aspartate, previously shown to increase the 50% lethal dose of beta-toxin for mice nearly 13-fold, significantly reduced the ability of beta-toxin to form channels. These data support the hypothesis that the lethal action of beta-toxin is based on the formation of cation-selective pores in susceptible cells.

Tyrosine kinase inhibitors. 17. Irreversible inhibitors of the epidermal growth factor receptor: 4-(phenylamino)quinazoline- and 4-(phenylamino)pyrido[3,2-d]pyrimidine-6-acrylamides bearing additional solubilizing functions

4-Anilinoquinazoline- and 4-anilinopyrido[3,2-d]pyrimidine-6-acrylamides substituted with solubilizing 7-alkylamine or 7-alkoxyamine side chains were prepared by reaction of the corresponding 6-amines with acrylic acid or acrylic acid anhydrides. In the pyrido[3,2-d]pyrimidine series, the intermediate 6-amino-7-alkylamines were prepared from 7-bromo-6-fluoropyrido[3,2-d]pyrimidine via Stille coupling with the appropriate stannane under palladium(0) catalysis. This proved a versatile method for the introduction of cationic solubilizing side chains. The compounds were evaluated for their inhibition of phosphorylation of the isolated EGFR enzyme and for inhibition of EGF-stimulated autophosphorylation of EGFR in A431 cells and of heregulin-stimulated autophosphorylation of erbB2 in MDA-MB 453 cells. Quinazoline analogues with 7-alkoxyamine solubilizing groups were potent irreversible inhibitors of the isolated EGFR enzyme, with IC(50[app]) values from 2 to 4 nM, and potently inhibited both EGFR and erbB2 autophosphorylation in cells. 7-Alkylamino- and 7-alkoxyaminopyrido[3,2-d]pyrimidines were also irreversible inhibitors with equal or superior potency against the isolated enzyme but were less effective in the cellular autophosphorylation assays. Both quinazoline- and pyrido[3,2-d]pyrimidine-6-acrylamides bound at the ATP site alkylating cysteine 773, as shown by electrospray ionization mass spectrometry, and had similar rates of absorptive and secretory transport in Caco-2 cells. A comparison of two 7-propoxymorpholide analogues showed that the pyrido[3,2-d]pyrimidine-6-acrylamide had greater amide instability and higher acrylamide reactivity, being converted to glutathione adducts in cells more rapidly than the corresponding quinazoline. This difference may contribute to the observed lower cellular potency of the pyrido[3,2-d]pyrimidine-6-acrylamides. Selected compounds showed high in vivo activity against A431 xenografts on oral dosing, with the quinazolines being superior to the pyrido[3,2-d]pyrimidines. Overall, the quinazolines proved superior to previous analogues in terms of aqueous solubility, potency, and in vivo antitumor activity, and one example (CI 1033) has been selected for clinical evaluation.

The structure, dynamics and orientation of antimicrobial peptides in membranes by multidimensional solid-state NMR spectroscopy

Linear peptide antibiotics have been isolated from amphibians, insects and humans and used as templates to design cheaper and more potent analogues for medical applications. Peptides such as cecropins or magainins are < or = 40 amino acids in length. Many of them have been prepared by solid-phase peptide synthesis with isotopic labels incorporated at selected sites. Structural analysis by solid-state NMR spectroscopy and other biophysical techniques indicates that these peptide antibiotics strongly interact with lipid membranes. In bilayer environments they exhibit amphipathic alpha-helical conformations and alignments of the helix axis parallel to the membrane surface. This contrasts the transmembrane orientations observed for alamethicin or gramicidin A. Models that have been proposed to explain the antibiotic and pore-forming activities of membrane-associated peptides, as well as other experimental results, include transmembrane helical bundles, wormholes, carpets, detergent-like effects or the in-plane diffusion of peptide-induced bilayer instabilities.

The interactions of histidine-containing amphipathic helical peptide antibiotics with lipid bilayers. The effects of charges and pH

The alpha-helix of the designed amphipathic peptide antibiotic LAH(4 )(KKALLALALHHLAHLALHLALALKKA-NH(2)) strongly interacts with phospholipid membranes. The peptide is oriented parallel to the membrane surface under acidic conditions, but transmembrane at physiological pH (Bechinger, B. (1996) J. Mol. Biol. 263, 768-775). LAH(4) exhibits antibiotic activities against Escherichia coli and Bacillus subtilis; the peptide does not, however, lyse human red blood cells at bacteriocidal concentrations. The antibiotic activities of LAH(4) are 2 orders of magnitude more pronounced at pH 5 when compared with pH 7.5. Although peptide association at low pH is reduced when compared with pH 7.5, the release of the fluorophore calcein from large unilamellar 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphocholine or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol vesicles is more pronounced at pH values where LAH(4) adopts an orientation along the membrane surface. The calcein release experiments thereby parallel the results obtained in antibiotic assays. Despite a much higher degree of association, calcein release activity of LAH(4) is significantly decreased for negatively charged membranes. Pronounced differences in the interactions of LAH(4) with 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol or 1-palmitoyl-2-oleoyl-sn-glycerol-3-phosphocholine membranes also become apparent when the mechanisms of dye release are investigated. The results presented in this paper support models in which antibiotic activity is caused by detergent-like membrane destabilization, rather than pore formation by helical peptides in transmembrane alignments.

The alignment of a voltage-sensing peptide in dodecylphosphocholine micelles and in oriented lipid bilayers by nuclear magnetic resonance and molecular modeling

The S4 segments of voltage-gated sodium channels are important parts of the voltage-sensing elements of these proteins. Furthermore, the addition of the isolated S4 polypeptide to planar lipid bilayers results in stepwise increases of ion conductivity. In order to gain insight into the mechanisms of pore formation by amphipathic peptides, the structure and orientation of the S4 segment of the first internal repeat of the rat brain II sodium channel was investigated in the presence of DPC micelles by multidimensional solution NMR spectroscopy and solid-state NMR spectroscopy on oriented phospholipid bilayers. Both the anisotropic chemical shift observed by proton-decoupled (15)N solid-state NMR spectroscopy and the attenuating effects of DOXYL-stearates on TOCSY crosspeak intensities of micelle-associated S4 indicate that the central alpha-helical portion of this peptide is oriented approximately parallel to the membrane surface. Simulated annealing and molecular dynamics calculations of the peptide in a biphasic tetrachloromethane-water environment indicate that the peptide alpha-helix extends over approximately 12 residues. A less regular structure further toward the C-terminus allows for the hydrophobic residues of this part of the peptide to be positioned in the tetrachloromethane environment. The implications for possible pore-forming mechanisms are discussed.

Phospholipase A2 action on planar lipid bilayers generates a small, transitory current that is voltage independent

Addition of either bee venom or Trimeresurus flavoviridis phospholipase A2 (PLA2) to the solution bathing the front side of a voltage-clamped, planar lipid bilayer consistently produced a transitory current lasting approximately 100 s. This current is consistent with anions moving through the membrane to the rear side. The peak current is independent of holding potential. PLA2 activity on phospholipid membranes not only produced a current but also led to membrane rupture within 300 s. The current depends on Ca2+ and lipid type. Addition of PLA2 in the absence of Ca2+ or to membranes made of nonsubstrate lipids (e.g., glycerol monooleate or lysophosphatidylcholine) produced no current and did not break the bilayer. Peak current height, signal decay time, and time to membrane rupture all depended on PLA2 dose, whereas total charge produced was constant. This current does not flow through ion channels because there are no channels present and the current is not voltage dependent. The evidence is consistent with the hypothesis that the current is generated by the movement of ionized fatty acid produced by PLA2 action. These results demonstrate a simple method to measure enzyme activity in the presence of different substrates and varied environmental conditions.

The lytic activity of the bee venom peptide melittin is strongly reduced by the presence of negatively charged phospholipids or chloroplast galactolipids in the membranes of phosphatidylcholine large unilamellar vesicles

We have investigated the dependence of the lytic activity of the bee venom peptide melittin on the lipid composition of its target membrane. The lysis of large unilamellar liposomes, measured as loss of the fluorescent dye carboxyfluorescein, in the presence of melittin was strongly reduced when the negatively charged lipids phosphatidylglycerol (PG) or phosphatidylserine (PS), or the plant chloroplast lipids monogalactosyldiacylglycerol (MGDG) or digalactosyldiacylglycerol (DGDG) were incorporated into egg phosphatidylcholine (EPC) membranes. This reduction was evident at concentrations below 10 wt% of the additional lipids. It was not due to reduced binding of melittin to the vesicles. It was also not related to a reduced insertion depth of the peptide into the bilayer, as shown by quenching of the intrinsic tryptophan fluorescence of the peptide by the aqueous quencher sodium nitrate. Fourier transform infrared spectroscopy (FTIR) revealed specific interactions of the peptide with the headgroups of the inhibitory lipids. The phosphate peak in PG was shifted by two wavenumbers after the addition of melittin. There was no shift in EPC or PS. Instead, in PS the COO- peak was strongly distorted in the presence of melittin. These data indicate ionic interactions between the basic peptide and the negative charges on the membrane surface. The galactolipids are uncharged. Here the evidence points to hydrogen bonding between melittin and OH-groups of the sugar headgroups. Liposomes containing DGDG were the only case where we found evidence for changes in fatty acyl chain motion due to the presence of melittin, from the CH2-scissoring peaks.

Protection by chlorpromazine, albumin and bivalent cations against haemolysis induced by melittin, [Ala-14]melittin and whole bee venom

The ability of the peptides melittin, [Ala-14]melittin (P14A) and whole bee venom to lyse red blood cells (RBC) and to cause shape transformation, binding, partitioning and changes in volume of the cells during haemolysis, as well as the action of the bivalent cations Zn2+ and Ca2+, chlorpromazine, albumin and plasma on the peptide-induced haemolysis of RBC in high ionic-strength solution, have been investigated. The protective effect of all inhibitors depends on whether they have been added to the media before or after the cells. When added before the cells they reduced significantly the rate of peptide-induced haemolysis and shape transformation. The effect was maximal when agents acted simultaneously after introduction of the cells into the media containing both inhibitors and peptides. Incubation of the cells in isotonic solution before the addition of peptides enhanced 2-3-fold the RBC susceptibility (i.e. rate of haemolysis) to lytic action of the same amount of peptides, and increased the order of the haemolytic reaction, although the power law coefficient did not exceed a value of 2 for all peptides, suggesting that haemolysis is attributable to the monomeric or dimeric forms of the peptides. Partition coefficients were of the order of approximately 10(6) M-1, and P14A possessed a value 3-fold larger compared with melittin and bee venom, which correlated with its enhanced haemolytic activity. The protective action of inhibitors against peptide-induced haemolysis has been explained on the basis of their ability to compete with peptide binding at an early stage of peptide-membrane interaction, and not as a result of inhibition of a pre-existing peptide-induced pore. Whereas melittin increased the volume of RBC during haemolysis, P14A, melittin in the presence of phospholipase A2 or bee venom, reduced the volume in a concentration-dependent manner. The present data reveal the significant role of the initial stage of peptide-membrane interaction and peptide structure in the mechanism of haemolysis. These data are not consistent with a lipid-based mechanism of peptide-induced haemolysis, indicating that the mode of peptide-protein interaction is an important and decisive step in the haemolytic mechanism. It should be noted that data (in the form of three additional Tables) on the ability of inhibitors to protect cells from haemolysis when inhibitor and peptide act simultaneously are available. They are reported in Supplementary Publication SUP 50178, which has been deposited at the British Library Document Supply Centre, Boston Spa, Wetherby, West Yorkshire LS23 7BQ, U.K., from whom copies can be obtained on the terms indicated in Biochem. J. (1996) 313, 9.

Membrane pores--from biology to track-etched membranes

Flow of ions through narrow pores, either induced in biological membranes or created in synthetic membrane filters, exhibits, under appropriate conditions: 1) rapid switching of ion current between high and low conducting states; 2) selectivity between different ions; 3) inhibition by protons or divalent cations with an order of efficacy usually H(+)> Zn(2+)>Ca(2+)>Mg(2+). It seems reasonable to conclude that these common properties arise from a common cause-the nature of the flow of ions close to a charged surface.

Cation-sensitive pore formation in rehydrated erythrocytes

Rehydration of red blood cells (RBC) in isotonic media after dehydration in hypertonic electrolyte or nonelectrolyte saline leads to their posthypertonic hemolysis (PH). Ca2+ ions at a concentration of more than 5 mM stimulated hemolysis of RBC treated by hypertonic sucrose but not NaCl if rehydration was carried out in the presence of cations. Zn2+ produced a more complex response of stimulation followed by inhibition as a concentration is increased. Mg2+, Ca2+, Zn2+, EDTA and sucrose exhibited only inhibition when added to isotonic NaCl media immediately after onset of rehydration or later on. At low ionic strength inhibition produced by divalent cations was markedly reduced and sucrose was ineffective. An equimolar concentration of EDTA abolished the inhibition of PH by Zn2+ ions if they were introduced into the isotonic media after the cells, but activated hemolysis when rehydration was carried out in the presence of ions. The same divalent cations prevented shape transformation and hemolysis induced by melittin if they interacted with the plasma membrane prior to the addition of melittin. Subsequent chelation of cations by EDTA triggers the full sequence of events characteristic to the action of melittin alone and resulted in cell spherulation followed by hemolysis. Inhibition of melittin-induced hemolysis produced by all cations was reversible because EDTA abolished the action of divalent cations and even stimulated hemolysis in isotonic sucrose. Similarities in the mode of action of divalent cations and EDTA on posthypertonic hemolysis which is attributed to endogenous stimuli and melittin-induced hemolysis as far as the exogenous agent is concerned imply that in both cases common intrinsic mechanisms are involved in the process of cation-sensitive pore formation in erythrocyte membranes, while differences indicate that more complex pores are formed during posthypertonic injury.

Action of melittin on the DPPC-cholesterol liquid-ordered phase: a solid state 2H-and 31P-NMR study

Solid-state deuterium and phosphorus-31 nuclear magnetic resonance studies of deuterium-labeled beta--[2,2',3,4,4',6-2H6]-cholesterol and 1,2-dipalmitoyl-sn-glycero-3-phosphatidylcholine have been undertaken to monitor the action of melittin on model membranes containing 30 mol% cholesterol, both at the molecular and macroscopic level. Cholesterol totally inhibits the toxin-triggered formation of large unilamellar vesicles and strongly restricts the appearance of small discs. The latter remain stable over a wide temperature range (20-60 degrees C) because of an increase in their cholesterol content as the temperature increases. This process is related to a constant disc hydrophobic thickness of approximately 29 A. The system, when not in the form of discs, appears to be composed of very large vesicles on which melittin promotes magnetically induced ellipsoidal deformation. This deformation is the greatest when the maximum of discs is observed. A model to describe both the disc formation and stability is proposed.

Broad cytolytic specificity of myotoxin II, a lysine-49 phospholipase A2 of Bothrops asper snake venom

The cytotoxic activity of Bothrops asper myotoxin II, a lysine-49 phospholipase A2 isoform, on different cell types in culture, was investigated. Myotoxin II caused a dose-dependent cytolytic effect on all cell types tested, characterized by rapid release of cytoplasmic lactic dehydrogenase and drastic morphological cell alterations. Quantitative differences in the susceptibility to myotoxin II among cell types fell within a relatively narrow range, and in general, the toxin was cytolytic at concentrations of 50-100 micrograms/ml (3-7 microM), when assays were performed using culture medium as a diluent. Toxin activity was markedly enhanced if phosphate-buffered saline was utilized instead of medium. The cytotoxic activity of myotoxin III, an aspartate-49 isoform from the same venom, on both endothelial cells and skeletal muscle myoblasts was higher than that of myotoxin II, suggesting that, although phospholipase A2 activity is clearly not required for the induction of cell damage, it may have an enhancing role. In contrast to B. asper myotoxins, other basic phospholipases A2 with myotoxic activity in vivo (notexin from Notechis scutatus, and two enzymes isolated from Vipera russelli venom) did not affect endothelial cells and myoblasts. Pretreatment of cells with neuraminidase, tunicamycin, or protamine, did not alter their susceptibility to myotoxin II. At low temperatures (2-4 degrees C) myotoxin II was devoid of cytolytic effect. Washing and neutralization experiments using heparin with low affinity for antithrombin or mouse monoclonal antibody MAb-3 suggest that at low temperatures myotoxin II binds very weakly to the cells, and that its normal interaction with the putative target is probably not only based on charge, but that a membrane penetration event may be required.

Effects of temperature, time, and toxin concentration on lesion formation by the Escherichia coli hemolysin

We performed osmotic protection experiments to test the hypothesis that the Escherichia coli hemolysin forms a discrete-size pore in erythrocyte membranes. The effects of toxin concentration, assay time, temperature, and protectant concentrations were examined. The results we present here raise doubts about the existing model of pore formation by hemolysin. We demonstrate that osmotic protection by various sugars of different sizes is a function of hemolysin concentration and assay time. The data indicate that under various conditions, lesion sizes with a diameter ranging from < 0.6 to > 1.2 nm can be inferred. Quantification of hemolysin permitted the estimation of the number of HlyA structural protein molecules required per erythrocyte for lysis in the presence of each protectant. It appears that hemolysin induces heterogeneous erythrocyte lesions which increase in size over time. Influx experiments utilizing radioactive sugar markers indicated that time-dependent osmotic protection patterns are independent of the diffusion rates of individual protectants. We demonstrate that the rate of the putative growth in the size of hemolysin-mediated lesions is temperature dependent. The erythrocyte membrane lesions formed at 37 degrees C can be stabilized in size when shifted to 4 degrees C. On the basis of these data, new models for the nature of the hemolysin-mediated erythrocyte membrane lesions are presented.

Triton channels are sensitive to divalent cations and protons

Addition of Triton X-100 to planar bilayers composed of dioleoyl phosphatidyl choline, diphytanoyl phosphatidyl choline or mono-oleoyl glycerol induces single channel-like events when electrical conductivity across the bilayer is measured. Addition of divalent cations or protons causes channels to disappear; single channel conductance of remaining channels is not significantly altered; addition of EDTA or alkali (respectively) reverses the effect. It is concluded that sensitivity to divalent cations and protons need not be dependent on specific channel proteins or pore-forming toxins, but may be a feature of any aqueous pore across a lipid milieu.

Membrane damage: common mechanisms of induction and prevention

Common features in the induction of pores by various agents are as follows: induction is stochastic and progressive; damage by different agents is often synergistic and limited. The prevention of membrane damage is affected by trivalent and divalent cations, by low pH, by low ionic strength and by high osmotic pressure. The inhibitory role of protons and divalent cations is considered in greater detail: pore-forming agents can be classified into two groups: channels across planar lipid bilayers induced by the first group display voltage-sensitive, reversible inhibition by divalent cations; channels of the second group show voltage-insensitive, irreversible inhibition by divalent cations. A search for the ligands to which divalent cations and protons bind has proved elusive. Comparison with the phenomenon of 'surface conductance' through narrow apertures, that is manifest in the absence of any pore-forming agent, may prove fruitful.

The amino-terminal peptide of HIV-1 glycoprotein 41 lyses human erythrocytes and CD4+ lymphocytes

Functional studies assessed the cytolytic activity of the amino terminal peptide (FP-I; 23 residues 519-541) of the glycoprotein 41,000 (gp41) of the Human Immunodeficiency Virus Type-1 (HIV-1). Synthetically prepared FP-I efficiently hemolyzed human red blood cells at 37 degrees C, with 40% lysis at 32 microM. Kinetic studies indicated that FP-I induced maximal hemolysis in 30 min, probably through tight binding of the peptide with the red cell membrane. The Phe-Leu-Gly-Phe-Leu-Gly (residues 526-531) motif in FP-I apparently plays a critical role in lysis of red cells, since no hemolytic activity was observed for an amino-acid-substituted FP-I in which the unique Phe-Leu-Gly-Phe-Leu-Gly was converted to Ala-Leu-Gly-Ala-Leu-Gly. As neither smaller constituent peptides (e.g., residues 519-524 and residues 526-536) nor a N-terminal flanking peptide (e.g., residues 512-523) induced red cell hemolysis, the entire 23-residue (519-541) sequence of FP-I may be required for hemolytic activity. FP-I was also cytolytic with CD4(+)-bearing Hut-78 cells, with 40% lysis at approx. 150 microM. These results are consistent with an earlier hypothesis that the N-terminal peptide of gp41 may partially contribute to the in vivo cytopathic actions of HIV-1 infection (Gallaher, W.R. (1987) Cell 50, 327-328).

Changes in membrane permeability during Semliki Forest virus induced cell fusion

The infection of Aedes albopictus cells by Semliki Forest virus (SFV) is a non lytic event. Exposure of infected cells to mildly acidic pH (less than 6.2) leads to syncytium formation. This polykaryon formation is accompanied by an influx of protons into the cells (Kempf et al. Biosci. Rep. 7, 761-769, 1987). We have further investigated this permeability change using various fluorescent or radiolabeled compounds. A significant, pH dependent increase of the membrane permeability to low molecular weight compounds (M(r) less than 1000) was observed when infected cells were exposed to a pH less than 6.2. The pH dependence of the permeability change was very similar to the pH dependence of cell-cell fusion. The permeability change was sensitive to divalent cations, protons and anionic antiviral drugs such as trypan blue. The nature of this virus induced, pH dependent permeability change is discussed.