Determination of polycyclic aromatic hydrocarbons by liquid chromatography

A new highly sensitive fluorescent probe for visualization of phosgene in liquid and gas phases

Phosgene is an important and widely used highly toxic chemical that poses a serious potential threat to public health and property if leaked or abused. Therefore, developing an efficient and convenient detection method for phosgene is of great significance. In this work, we synthesized a novel fluorescent probe, BCyP, based on benzohemicyanine for highly selective and sensitive detection of phosgene in both liquid and gas phases. The probe uses amino alcohol as a specific recognition group for phosgene and does not fluoresce due to the strong intramolecular charge transfer effect (ICT). However, in the presence of phosgene, the amino alcohol part in the probe can form oxazolidinone in situ with phosgene, reducing the ICT effect in the probe molecule and lighting fluorescence, thus realizing the selective phosgene detection. The probe exhibits good specificity towards phosgene, with significant fluorescence enhancement (approximately 400-fold), a remarkable Stokes shift (139 nm), a fast response speed (less than 17 s), and a low detection limit (0.12 ppm). Additionally, we prepared a phosgene detection paper strip loaded with the probe on filter paper and combined it with color recognition software on a smartphone to achieve visual detection of phosgene in the gas phase.

A novel benzo hemicyanine-based fluorescent probe for susceptible visualizing detection of phosgene

Leakage and misuse of phosgene, a common and highly hazardous industrial chemical, have always constituted a safety risk. Therefore, it is crucial to develop sensitive detection methods for gaseous phosgene. This work describes the design and development of a new fluorescent dye based on benzohemicyanine, as well as the synthesis of fluorescent probes for the sensitive detection of gaseous phosgene. Due to the excellent intramolecular charge transfer (ICT) effect from the strong electron-donating impact of the o-aminophenol group on benzo hemicyanine, the probe does not emit fluorescence. When the probe reacts with phosgene, the ICT effect is inhibited, and the result exhibits observable green fluorescence, thereby visualizing the response to phosgene. The probe offers exceptional sensitivity, a rapid response, and a low phosgene detection limit. In addition, we developed probe-loaded, portable test strips for the quick and sensitive detection of phosgene in the gas phase. Finally, the constructed probe-loaded test strips were utilized effectively to monitor the simulated phosgene leakage.

Advances in Chemical Analysis of Oil Spills Since the Deepwater Horizon Disaster

Analytical techniques for chemical analysis of oil, oil photochemical and biological transformation products, and dispersants and their biodegradation products benefited significantly from research following the 2010 Deepwater Horizon (DWH) disaster. Crude oil and weathered-oil matrix reference materials were developed based on the Macondo well oil and characterized for polycyclic aromatic hydrocarbons, hopanes, and steranes for use to assure and improve the quality of analytical measurements in oil spill research. Advanced gas chromatography (GC) techniques such as comprehensive two-dimensional GC (GC × GC), pyrolysis GC with mass spectrometry (MS), and GC with tandem MS (GC-MS/MS) provide a greater understanding at the molecular level of composition and complexity of oil and weathering changes. The capabilities of high-resolution MS (HRMS) were utilized to extend the analytical characterization window beyond conventional GC-based methods to include polar and high molecular mass components (>400 Da) and to provide new opportunities for discovery, characterization, and investigation of photooxidation and biotransformation products. Novel separation approaches to reduce the complexity of the oil and weathered oil prior to high-resolution MS and advanced fluorescence spectrometry have increased the information available on spilled oil and transformation products. HRMS methods were developed to achieve the required precision and sensitivity for detection of dispersants and to provide molecular-level characterization of the complex surfactants. Overall, research funding following the DWH oil spill significantly advanced and expanded the use of analytical techniques for chemical analysis to support petroleum and dispersant characterization and investigations of fate and effects of not only the DWH oil spill but future spills.

Quantitative analysis of polycyclic aromatic hydrocarbons using high-performance liquid chromatography-photodiode array-high-resolution mass spectrometric detection platform coupled to electrospray and atmospheric pressure photoionization sources

Polycyclic aromatic hydrocarbons (PAHs) are common pollutants present in atmospheric aerosols and other environmental mixtures. They are of particular air quality and human health concerns as many of them are carcinogenic toxins. They also affect absorption of solar radiation by aerosols, therefore contributing to the radiative forcing of climate. For environmental chemistry studies, it is advantageous to quantify PAH components using the same analytical technics that are commonly applied to characterize a broad range of polar analytes present in the same environmental mixtures. Liquid chromatography coupled with photodiode array and high-resolution mass spectrometric detection (LC-PDA-HRMS) is a method of choice for comprehensive characterization of chemical composition and quantification of light absorption properties of individual organic compounds present in the environmental samples. However, quantification of non-polar PAHs by this method is poorly established because of their imperfect ionization in electrospray ionization (ESI) technique. This tutorial article provides a comprehensive evaluation of the quantitative analysis of 16 priority pollutant PAHs in a standard reference material using the LC-MS platform coupled with the ESI source. Results are further corroborated by the quantitation experiments using an atmospheric pressure photoionization (APPI) method, which is more sensitive for the PAH detection. The basic concepts and step-by-step practical guidance for the PAHs quantitative characterization are offered based on the systematic experiments, which include (1) Evaluation effects of different acidification levels by formic acid on the (+)ESI-MS detection of PAHs. (2) Comparison of detection limits in ESI+ versus APPI+ experiments. (3) Investigation of the PAH fragmentation patterns in MS2 experiments at different collision energies. (4) Calculation of wavelength dependent mass absorption coefficient (MACλ) of the standard mixture and its individual PAHs using LC-PDA data. (5) Assessment of the minimal injected mass required for accurate quantification of MACλ of the standard mixture and of a multi-component environmental sample.

Hybrid-Lipid Bilayers Induce n-Alkyl-Chain Order in Reversed-Phase Chromatographic Surfaces, Impacting their Shape Selectivity for Aromatic Hydrocarbon Partitioning

Shape selectivity is important in reversed-phase liquid chromatographic separations, where stationary phases are capable of separating geometric isomers, thereby resolving solutes based on their three-dimensional structure or shape rather than other chemical differences. Numerous chromatographic studies have been carried out using n-alkyl-chain-modified columns to understand how molecular shape affects retention. For polycyclic aromatic hydrocarbons (PAHs), it was found that planar compounds were selectively retained over nonplanar structures of comparable molecular weight on surfaces with longer n-alkyl chains, higher chain-density, or at lower temperatures, where selectivity likely arises with greater ordering of the n-alkyl chains. A limitation of these studies, however, is the small range of chain ordering that can be achieved and lack of a direct measure of the n-alkyl-chain order of the stationary phases. In this work, we employ a C₁₈ stationary phase modified with a monolayer of phospholipid as a means of significantly varying the n-alkyl chain order. These hybrid-supported lipid bilayers, which have previously been employed as membrane-like stationary phases for measuring lipophilicity, provide a unique approach to control n-alkyl chain ordering by varying the acyl chain length and degree of unsaturation of the phospholipid modifier. The degree of alkyl-chain order of the resulting modified surfaces is determined from the ratio of trans- versus gauche-conformers, measured in situ within individual porous particles by confocal Raman microscopy. This methodology was also used to assess the affinity of these surfaces for planar versus nonplanar PAH molecules. The retention selectivity for the planar versus nonplanar compounds, thus determined, was found to vary significantly and systematically with the degree of order of the acyl/alkyl chains in the hybrid-supported lipid bilayers. The investigation also demonstrates the utility of confocal Raman microscopy for interrogating the impact of solute partitioning on stationary-phase structure within porous chromatographic particles.

Hand-portable HPLC with broadband spectral detection enables analysis of complex polycyclic aromatic hydrocarbon mixtures

Polycyclic aromatic hydrocarbons (PAHs) are considered priority hazardous substances due to their carcinogenic activity and risk to public health. Strict regulations are in place limiting their release into the environment, but enforcement is hampered by a lack of adequate field-testing procedure, instead relying on sending samples to centralised analytical facilities. Reliably monitoring levels of PAHs in the field is a challenge, owing to the lack of field-deployable analytical methods able to separate, identify, and quantify the complex mixtures in which PAHs are typically observed. Here, we report the development of a hand-portable system based on high-performance liquid chromatography incorporating a spectrally wide absorption detector, capable of fingerprinting PAHs based on their characteristic spectral absorption profiles: identifying 100% of the 24 PAHs tested, including full coverage of the United States Environmental Protection Agency priority pollutant list. We report unsupervised methods to exploit these new capabilities for feature detection and identification, robust enough to detect and classify co-eluting and hidden peaks. Identification is fully independent of their characteristic retention times, mitigating matrix effects which can preclude reliable determination of these analytes in challenging samples. We anticipate the platform to enable more sophisticated analytical measurements, supporting real-time decision making in the field.

Hepatic alterations associated with fine particulate matter exposure

Several studies have pointed to fine particulate matter (PM_2.5) as the main responsible for air pollution toxic effects. Indeed, PM_2.5 may not only cause respiratory and cardiovascular abnormalities but it may also affect other organs such as the liver. Be that as it may, only a few studies have evaluated the PM_2.5 effects on hepatic tissue. Moreover, most of them have not analyzed the relationship between particles composition and toxicological effects. In this study, healthy rats were subjected to urban levels of PM_2.5 particles in order to assess their structural and functional effects on the liver. During the exposure periods, mean PM_2.5 concentrations were slightly higher than the value suggested by the daily guideline of the World Health Organization. The exposed rats showed a hepatic increase of Cr, Zn, Fe, Ba, Tl and Pb levels. This group also showed leukocyte infiltration, sinusoidal dilation, hydropic inclusions and alterations in carbohydrates distribution. These histologic lesions were accompanied by serological changes, such as increase of total cholesterol and triglycerides, as well as genotoxic damage in their nuclei. We also observed significant associations between several biomarkers and PM_2.5 composition. Our results show that exposure to low levels of PM_2.5 might cause histologic and serological changes in liver tissue, suggesting that PM_2.5 toxicity is influenced not only by their concentration but also by their composition and the exposure frequency.

A sensor array for the discrimination of polycyclic aromatic hydrocarbons using conjugated polymers and the inner filter effect

The inner filter effect and multivariate array sensing using conjugated polymers are combined for the detection and challenging discrimination of closely related polycyclic aromatic hydrocarbons.

Natural and anthropogenic activities result in the production of polycyclic aromatic hydrocarbons (PAHs), persistent pollutants that negatively impact the environment and human health. Rapid and reliable methods for the detection and discrimination of these compounds remains a technological challenge owing to their relatively featureless properties, structural similarities, and existence as complex mixtures. Here, we demonstrate that the inner filter effect (IFE), in combination with conjugated polymer (CP) array-based sensing, offers a straightforward approach for the quantitative and qualitative profiling of PAHs. The sensor array was constructed from six fluorescent fluorene-based copolymers, which incorporate side chains with peripheral 2-phenylbenzimidazole substituents that provide spectral overlap with PAHs and give rise to a pronounced IFE. Subtle structural differences in copolymer structure result in distinct spectral signatures, which provide a unique “chemical fingerprint” for each PAH. The discriminatory power of the array was evaluated using linear discriminant analysis (LDA) and principal component analysis (PCA) in order to discriminate between 16 PAH compounds identified as priority pollutants by the US Environmental Protection Agency (EPA). This array is the first multivariate system reliant on the modulation of the spectral signatures of CPs through the IFE for the detection and discrimination of closely related polynuclear aromatic species.

In Situ Miniaturised Solid Phase Extraction (m-SPE) for Organic Pollutants in Seawater Samples

Solid phase extraction (SPE) is a consolidated technique for determining pollutants in seawater samples. The current tendency is to miniaturise systems that extract and determine pollutants in the environment, reducing the use of organic solvents, while maintaining the quality in the extraction and preconcentration. On the other hand, there is a need to develop new extraction systems that can be fitted to in situ continual monitoring buoys, especially for the marine environment. This work has developed a first model of a low-pressure micro-SPE (m-SPE) for persistent organic pollutants (POPs) that can be simply applied to in situ monitoring in the marine environment. This system reduces the volumes of sample and solvents required in the laboratory in comparison with conventional SPE. In the future, it could be used in automated or robotic systems in marine technologies such as marine gliders and oceanographic buoys. This system has been optimised and validated to determine polycyclic aromatic hydrocarbons (PAH) in seawater samples, but it could also be applied to other kinds of persistent organic pollutants (POPs) and emerging pollutants.

Combined electrochemical, sunlight-induced oxidation and biological process for the treatment of chloride containing textile effluent

This study presents a combined electrochemical, sunlight-induced oxidation and biological process for the treatment of textile effluent. In the first step, RuO₂-TiO₂/Ti and Titanium were used as the electrodes in EO process and color removal was achieved in 40 min at an applied current density of 20 mA cm^-2. The EO process generated about 250 mg L^-1 of active chlorine which hampered the subsequent biological treatment process. Thus, in the second step, sun light-induced photolysis (SLIP) is explored to remove hypochlorite present in the EO treated effluent. In the third step, the SLIP treated effluent was fed to laccase positive bacterial consortium for biological process. To assess the effect of SLIP in the overall process, experiments were carried out with and without SLIP process. In experiments without SLIP, sodium thiosulfate was used to remove active chlorine. HPLC analysis showed that SLIP integrated experiments achieved an overall dye component degradation of 71%, where as only 22% degradation was achieved in the absence of SLIP process. The improvement in degradation with SLIP process is attributed to the presence of ClO radicals which detected by EPR analysis. The oxidation of organic molecules during process was confirmed by FT-IR and GC-MS analysis.

Automated clean-up, separation and detection of polycyclic aromatic hydrocarbons in particulate matter extracts using a 2D-LC/2D-GC system: a method translation from two FIDs to two MS detectors

An online two-dimensional (2D) liquid chromatography/2D gas chromatography system with two mass-selective detectors has been developed on the basis of a previous system with two flame ionization detectors. The method translation involved the change of carrier gas from hydrogen to helium, column dimension and detectors. The 2D system with two mass-selective detectors was validated with use of polycyclic aromatic hydrocarbon (PAH) standards and two standard reference materials from air and diesel exhaust. Furthermore, the system was applied to a real sample, wood smoke particulates. The PAH values determined correlated well with the previous data and those from the National Institute of Standards and Technology. The system enhanced the benefits of the previous system, which were limited by the low detectability and lack of mass selectivity. This study shows an automated 2D system that is valid for PAH analysis of complex environmental samples directly from crude extracts. Graphical Abstract Schematic illustration showing on-line clean-up, separation and detection using 2D-LC/2D-GC/MS.

Bodipy recognizes polyaromatic hydrocarbons via C–H⋯F type weak H-bonding

Polycyclic aromatic hydrocarbons (PAHs) demonstrated unusual weak C–H⋯F type H-bonding interaction with meso-substituted Bodipy dyes (1–3) in ethanol medium.

Removal of naphthalene from aqueous systems by poly(divinylbenzene) and poly(methyl methacrylate-divinylbenzene) resins

Treatment of the oily wastewater from crude oil extraction is a growing challenge due to rising concern for the environment. Polyaromatic hydrocarbons (PAHs) deserve special attention because of their high toxicity. There is a need to develop processes able to minimize the discharge of these compounds and analytic techniques to monitor the levels of PAHs in aqueous media. In this study poly(methyl methacrylate-divinylbenzene) (MMA-DVB) and poly(divinylbenzene) (DVB) were assessed with respect to their capacity to retain naphthalene (NAF) in continuous flow and batch processes (adsorption equilibrium and kinetics). The analytic techniques applied were gas chromatography and spectrofluorimetry, which was adapted for quantification of NAF. The batch adsorption studies showed that DVB is more efficient in adsorption than MMA-DVB, and the Freundlich model and pseudo-second-order model better fitted the equilibrium data and adsorption kinetics, respectively. The elution results showed that both resins are highly efficient in removing NAF, with DVB outperforming MMA-DVB. However, MMA is cheaper raw material, making MMA-DVB more competitive for treatment of oily wastewater. The resins were regenerated by eluting about 7.2 and 2.5 L of methanol:water (70:30 v/v), respectively for DVB and MMA-DVB. Regarding to the useful life after regeneration, the resins presented a reduction about 30%, relating to zero concentration of NAF.

A simple strategy for monitoring of aromatic degradation in a chloride mediated electrooxidation process

UV-Vis spectrum analysis of textile dyeing wastewater during electrooxidation.

Urinary 1-hydroxypyrene as a biomarker of exposure to polycyclic aromatic hydrocarbons: biological monitoring strategies and methodology for determining biological exposure indices for various work environments

This article reviews the published studies on urinary 1-hydroxypyrene (1-OHP) as a biomarker of exposure to polycyclic aromatic hydrocarbons (PAHs) in work environments. Sampling and analysis strategies as well as a methodology for determining biological exposure indices (BEIs) of 1-OHP in urine for different work environments are proposed for the biological monitoring of occupational exposure to PAHs. Owing to the kinetics of absorption of pyrene by different exposure routes and excretion of 1-OHP in urine, in general, 1-OHP urinary excretion levels increase during the course of a workday, reaching maximum values 3-9 h after the end of work. When the contribution of dermal exposure is important, post-shift 1-OHP excretion can however be lower than pre-shift levels in the case where a worker has been exposed occupationally to PAHs on the day prior to sampling. In addition, 1-OHP excretion levels in either pre-shift, post-shift or evening samples increase during the course of a work-week, levelling off after three consecutive days of work. Consequently, ideally, for a first characterization of a work environment and for an indication of the major exposure route, considering a 5-day work-week (Monday to Friday), the best sampling strategy would be to collect all micturitions over 24 h starting on Monday morning. Alternatively, collection of pre-shift, post-shift and evening urine samples on the first day of the work-week and at the end of the work-week is recommended. For routine monitoring, pre-shift samples on Monday and post-shift samples on Friday should be collected when pulmonary exposure is the main route of exposure. On the other hand, pre-shift samples on Monday and Friday should be collected when the contribution of skin uptake is important. The difference between beginning and end of work-week excretion will give an indication of the average exposure over the workweek. Pre-shift samples on the first day of the work-week will indicate background values, and, hence, reflect general environment exposure and body burden of pyrene and/or its metabolites. On the other hand, since PAH profile can vary substantially in different work sites, a single BEI cannot apply to all workplaces. A simple equation was therefore developed to establish BEIs for workers exposed to PAHs in different work environments by using a BEI already established for a given work environment and by introducing a correction factor corresponding to the ratio of the airborne concentration of the sum of benzo(a)pyrene (BaP) equivalent to that of pyrene. The sum of BaP equivalent concentrations represents the sum of carcinogenic PAH concentrations expressed as BaP using toxic equivalent factors. Based on a previously estimated BEI of 2.3 μmol 1-OHP mol(-1) creatinine for coke-oven workers, BEIs of 4.4, 8.0 and 9.8 μmol 1-OHP mol(-1) creatinine were respectively calculated for vertical pin Söderberg workers, anode workers and pre-bake workers of aluminium plants and a BEI of 1.2 μmol 1-OHP mol(-1) creatinine was estimated for iron foundry workers. This approach will allow the potential risk of cancer in individuals occupationally exposed to PAHs to be assessed better.

Use of constant wavelength synchronous spectrofluorimetry for identification of polycyclic aromatic hydrocarbons in air particulate samples

We have developed a simple, rapid, inexpensive method for the identification of fluoranthene (Flan), benz(a)anthracene (BaA), benzo(a)pyrene (BaP), benzo(k)fluoranthene (BkF), pyrene (Pyr), benz(ghi)perylene (BghiP) in suspended particulate matter in an urban environment of Delhi. Suspended particulate matter samples of 24h duration were collected on glass fiber filter papers. Polycyclic aromatic hydrocarbons (PAHs) were extracted from the filter papers using dichloromethane (DCM) and hexane with ultrasonication method. Comparison of the characteristic emission of spectra of PAHs with standard spectra indicated the degree of condensation of aromatic compounds present in investigated mixtures. It was also possible to identify some individual compounds. However, this identification could be more effective with the use of the respective values of Δλ parameter for each particular component of the mixture.

Distribution and sources of polycyclic aromatic hydrocarbons in sediments of the Mai Po Inner Deep Bay Ramsar Site in Hong Kong

The concentration of total polycyclic aromatic hydrocarbons (∑PAHs) and the 16 US EPA priority individual PAH compounds were analyzed in surface sediments from the Mai Po Inner Deep Bay, Ramsar Site of Hong Kong from December 2001 to Jun 2005, to investigate the spatial variability of anthropogenic pollutants. ∑PAHs concentrations ranged from 36.5 to 256.3 ng g(-1) dry weight with an average of 148.9 ng g(-1), comparable to other urbanized areas of the world, and there was little difference among different sampling times from December 2001 to June 2005. Based on comparison to the results from earlier study, it appears that a decrease of total PAHs concentration has occurred since 1992. Meanwhile, the concentrations of ∑PAHs were positive correlated with total organic carbon contents except sites F and G, suggesting the characteristics of the sediment influences the distribution and concentration of PAHs. There was relatively a good relationship among the individual PAHs and the compounds of fluorene, phenanthrene, anthracene, fluoranthene, pyrene, benzo[a]pyrene and indeno[cd]pyrene yielded a good correlation (r(2) > 0.5) with total PAHs. Principal component analysis and specific PAHs compound ratios (Phe/Ant vs. Flt/Pyr) indicate the pyrogenic origins, especially traffic exhausts, are the dominant sources of PAHs in the Mai Po Inner Deep Bay Nature Reserve.

Role of chromatography in the development of Standard Reference Materials for organic analysis

The certification of chemical constituents in natural-matrix Standard Reference Materials (SRMs) at the National Institute of Standards and Technology (NIST) can require the use of two or more independent analytical methods. The independence among the methods is generally achieved by taking advantage of differences in extraction, separation, and detection selectivity. This review describes the development of the independent analytical methods approach at NIST, and its implementation in the measurement of organic constituents such as contaminants in environmental materials, nutrients and marker compounds in food and dietary supplement matrices, and health diagnostic and nutritional assessment markers in human serum. The focus of this review is the important and critical role that separation science techniques play in achieving the necessary independence of the analytical steps in the measurement of trace-level organic constituents in natural matrix SRMs.

Fluorescence standards: Classification, terminology, and recommendations on their selection, use, and production (IUPAC Technical Report)

Chromophore-based fluorescence standards for the characterization of photo-luminescence measuring systems and the determination of relevant fluorometric quantities are classified according to their scope and area of application. General and type-specific requirements for suitable standards are derived for each class of standards. Metrological requirements linked to the realization of comparable measurements are addressed and recommendations on selecting, using, and developing fluorescence standards are given.

Trueness, precision, and detectability for sampling and analysis of organic species in airborne particulate matter

Recovery, precision, limits of detection and quantitation, blank levels, calibration linearity, and agreement with certified reference materials were determined for two classes of organic components of airborne particulate matter, polycyclic aromatic hydrocarbons and hopanes, using typical sampling and gas chromatography/mass spectrometry analysis methods. These determinations were based on initial method proficiency tests and on-going internal quality control procedures. Recoveries generally ranged from 75% to 85% for all target analytes and collocated sample precision estimates were generally better than 20% for polycyclic aromatic hydrocarbons and better than 25% for hopanes. Results indicated substantial differences in data quality between the polycyclic aromatic hydrocarbons and hopanes. Polycyclic aromatic hydrocarbons demonstrated better collocated precision, lower method detection limits, lower blank levels, and better agreement with certified reference materials than the hopanes. The most serious area of concern was the disagreement between measured and expected values in the standard reference material for hopanes. With this exception, good data quality was demonstrated for all target analytes on all other data quality indicators.

Sensing of polycyclic aromatic hydrocarbons with cyclodextrin inclusion complexes on silver nanoparticles by surface-enhanced Raman scattering

We have developed a new type of surface-enhanced Raman scattering (SERS) substrate that consists of per-6-deoxy-(6-thio)-beta-cyclodextrin (CD-SH) modified by silver nanoparticles (AgNPs) for sensing of polycyclic aromatic hydrocarbons (PAHs), a kind of environmental pollutant, with very low affinity to metallic surfaces. The designed system can induce some PAH molecules (anthracene and pyrene) to insert into the hydrophobic cavity of beta-CD, which enables one to detect SERS of PAHs because the analytes are very close to the AgNPs surface, which is the zone of electromagnetic enhancement. The measured spectra can easily distinguish the two kinds of PAH compounds in a mixture by their own characteristic peaks. In addition, we carried out selective detection of PAHs by SERS of the inclusion complexes with different concentrations in the presence of CD-SH functionalized AgNPs. Moreover, this sensing platform has been applied to quantitative detection of PAH in a mixture consisting of anthracene and pyrene. The CD molecule has the feature of high selectivity due to its size of cavity, significantly enhancing the sensitivity of the system after CD-SH adsorbs on AgNPs via the terminal thiol. This proposed method for the detection of PAHs holds great potential in environmental analytical chemistry.

Dynamics within alkylsiloxane self-assembled monolayers studied by sensitive dielectric spectroscopy

Self-assembled monolayers are a ubiquitous laboratory tool and have been the subject of many experimental investigations which have primarily focused on static properties of full coverage monolayers, with the maximum density and ordering possible. In this work, dynamics within low density, planar siloxane self-assembled monolayers are studied utilizing highly sensitive dielectric spectroscopy. Dilute, disordered films were intentionally fabricated in order to study the widest range of possible motions. At low coverage, an interacting relaxation is observed, which has similar dynamics to polyethylene-like glass transitions observed in phase-segregated side-chain polymers, despite the rigidity of the substrate and the constraint of ethyl groups in relatively short chains. As density is increased, a second local relaxation, previously observed in three-dimensional SAMs and associated with rotation within a small segment of the alkyl chain, is also observed.

Mixed-mode reversed-phase and ion-exchange monolithic columns for micro-HPLC

This paper describes the fabrication of RP/ion-exchange mixed-mode monolithic materials for capillary LC. Following deactivation of the capillary surface with 3-(trimethoxysilyl)propyl methacrylate (gamma-MAPS), monoliths were formed by copolymerisation of pentaerythritol diacrylate monostearate (PEDAS), 2-sulphoethyl methacrylate (SEMA) with/without ethylene glycol dimethacrylate (EDMA) within 100 microm id capillaries. In order to investigate the porous properties of the monoliths prepared in our laboratory, mercury intrusion porosimetry, SEM and micro-HPLC were used to measure the monolithic structures. The monolithic columns prepared without EDMA showed bad mechanical stability at high pressure, which is undesirable for micro-HPLC applications. However, it was observed that the small amount (5% w/w) of EDMA clearly improved the mechanical stability of the monoliths. In order to evaluate their application for micro-HPLC, a range of neutral, acidic and basic compounds was separated with these capillaries and satisfactory separations were obtained. In order to further investigate the separation mechanism of these monolithic columns, comparative studies were carried out on the poly(PEDAS-co-SEMA) monolithic column and two other monoliths, poly(PEDAS) and poly(PEDAS-co-2-(methacryloyloxy)ethyl-trimethylammonium methylsulphate (METAM)). As expected, different selectivities were observed for the separation of basic compounds on all three monolithic columns using the same separation conditions. The mobile phase pH also showed clear influence on the retention time of basic compounds. This could be explained by ion-exchange interaction between positively charged analytes and the negatively charged sulphate group.

Organochlorine contaminants in endangered Steller sea lion pups (Eumetopias jubatus) from western Alaska and the Russian Far East

Investigations into the cause of the Steller sea lion population decline have focused on numerous factors, including exposure to toxic contaminants such as organochlorines (OCs). OCs, such as polychlorinated biphenyls (PCBs), 1,1,1-trichloro-2,2-bis(p-chlorophenyl)ethane, or dichlorodiphenyltrichloroethane (DDT), have been associated with various biological effects in marine mammals. We measured these compounds in whole blood of free-ranging Steller sea lion pups in order to determine the extent and magnitude of contamination across their geographical range. Of 212 pups analyzed for OCs, 76 pups (36 females and 40 males) were from western Alaska and the other 136 (63 females and 73 males) were from the Russian Far East. Concentrations of summation SigmaPCBs in the whole blood of pups from western Alaska ranged from 0.21 to 13 ng/g wet weight with a mean of 2.1+/-0.27 ng/g wet weight. In the Russian animals, summation SigmaPCB concentrations in the whole blood of pups ranged from 0.33 to 36 ng/g wet weight with a mean of 4.3+/-0.44 ng/g wet weight. summation SigmaDDT concentrations in the whole blood of pups from western Alaska ranged from 0.18 to 11 ng/g wet weight with a mean of 1.6+/-0.23 ng/g wet weight. In Russia, summation SigmaDDT in the whole blood of pups ranged from undetectable to 26 ng/g wet weight with a mean of 3.3+/-0.36 ng/g wet weight. Average OC concentrations were significantly higher in the blood of Russian animals compared to western Alaska (for PCBs and DDTs, p<0.001) and in both areas females had higher concentrations than males. Male pups from western Alaska had significantly lower levels of summation SigmaPCBs and summation SigmaDDT when compared to male pups from Russia (for PCBs and DDTs p<0.001). Female pups from western Alaska were significantly lower in summation SigmaPCBs than Russian female pups (for PCBs p=0.009) as were female pups for summation SigmaDDT levels between areas (for DDTs p=0.026). OC contaminants data indicate that Steller sea lion pups have measurable concentrations of these synthetic chemicals. While any physiological effect and the specific role these chemicals may have in either the decline or the failure of the endangered Steller sea lion population to recover needs to be further investigated, this study indicates specific areas and animals that may be most at risk.

A multi-dimensional high performance liquid chromatographic method for fingerprinting polycyclic aromatic hydrocarbons and their alkyl-homologs in the heavy gas oil fraction of Alaskan North Slope crude

We report an offline multi-dimensional high performance liquid chromatography (HPLC) technique for the group separation and analysis of PAHs in a heavy gas oil fraction (boiling range 287-481 degrees C). Waxes present in the heavy gas oil fraction were precipitated using cold acetone at -20 degrees C. Recovery studies showed that the extract contained 93% (+/-1%; n=3) of the PAHs that were originally present while the wax residue contained only 6% (+/-0.5%; n=3). PAHs present in the extract were fractionated, based on number of rings, into five fractions using a semi-preparative silica column (normal-phase HPLC). These fractions were analyzed using reverse-phase HPLC (RP-HPLC) coupled to a diode array detector (DAD). The method separated alkyl and un-substituted PAHs on two reverse-phase columns in series using an acetonitrile/water mobile phase. UV spectra of the chromatographic peaks were used to differentiate among PAH groups. Further characterization of PAHs within a given group to determine the substituent alkyl carbon number used retention time matching with a suite of alkyl-PAH standards. Naphthalene, dibenzothiophene, phenanthrene and fluorene and their C1-C4 alkyl isomers were quantified. The concentrations of these compounds obtained using the current method were compared with that of a GC-MS analysis obtained from an independent oil chemistry laboratory.

Identification of a new C28H14 polycyclic aromatic hydrocarbon as a product of supercritical fuel pyrolysis: Tribenzo[cd,ghi,lm]perylene

Tribenzo[cd,ghi,lm]perylene has been identified as a product of the supercritical pyrolysis of both toluene and Fischer-Tropsch synthetic jet fuel. This identification is based on HPLC/UV/MS data, which show that compound I, eluting immediately after five other C28H14 isomers, is also a C28H14 PAH. The UV spectrum of compound I has features of a benzenoid PAH, of which there are only eight C28H14 isomers. Four of these isomers--benzo[a]coronene, phenanthro[5,4,3,2-efghi]perylene, benzo[cd]naphtho[3,2,1,8-pqra]perylene, and benzo[pqr]naphtho[8,1,2-bcd]perylene--have already been identified as supercritical pyrolysis products by matching their UV spectra with those of respective reference standards. A fifth C28H14 PAH--benzo[ghi]naphtho[8,1,2-bcd]perylene, which does not have a reference standard--has also been recently identified through MS and UV data, use of annellation theory to predict UV spectral characteristics, and length-to-breadth ratio/retention time data. Of the remaining three isomers, bisanthene (IUPAC name phenanthro[1,10,9,8-opqra]perylene) has been determined not to be present in our product mixture, as its UV spectrum does not match that of any of our product PAH. Using annellation theory, we predict the UV spectral characteristics of the two remaining C28H14 benzenoid isomers, for which there are no reference standards (tribenzo[cd,ghi,lm]perylene and naphthaceno[3,4,5,6,7-defghij]naphthacene). Results from this analysis show that the predicted UV spectral features of tribenzo[cd,ghi,lm]perylene match those of compound I--and that those of naphthaceno[3,4,5,6,7-defghij]naphthacene are inconsistent with those of compound I. The length-to-breadth ratio of tribenzo[cd,ghi,lm]perylene also agrees with compound I's HPLC elution behavior. This is the first time that tribenzo[cd,ghi,lm]perylene (IUPAC name phenanthro[2,1,10,9,8,7-pqrstuv]pentaphene) has been identified as a product of fuel pyrolysis or combustion.

Optimization of the dopant for the trace determination of polycyclic aromatic hydrocarbons by liquid chromatography/dopant-assisted atmospheric-pressure photoionization/mass spectrometry

The composition of the dopant for the analysis of polycyclic aromatic hydrocarbons (PAHs) by liquid chromatography/dopant-assisted atmospheric-pressure photoionization/mass spectrometry under reversed-phase conditions was optimized to enhance the ionization efficiency for PAHs. The most suitable dopant was a toluene/anisole mixture (99.5:0.5, v/v) and it could improve limit of detections (LODs) to 0.79-168 ng mL(-1) (signal-to-noise (S/N)=3) for 16 common PAHs. The LODs are 3.8-40 times lower than those obtained with toluene alone and are comparable to those obtained using gas chromatography/mass spectrometry.

Analysis of polycyclic aromatic hydrocarbons (PAHs) in environmental samples: a critical review of gas chromatographic (GC) methods

Polycyclic aromatic hydrocarbons (PAHs) are frequently measured in the atmosphere for air quality assessment, in biological tissues for health-effects monitoring, in sediments and mollusks for environmental monitoring, and in foodstuffs for safety reasons. In contemporary analysis of these complex matrices, gas chromatography (GC), rather than liquid chromatography (LC), is often the preferred approach for separation, identification, and quantification of PAHs, largely because GC generally affords greater selectivity, resolution, and sensitivity than LC. This article reviews modern-day GC and state-of-the-art GC techniques used for the determination of PAHs in environmental samples. Standard test methods are discussed. GC separations of PAHs on a variety of capillary columns are examined, and the properties and uses of selected mass spectrometric (MS) techniques are presented. PAH literature on GC with MS techniques, including chemical ionization, ion-trap MS, time-of-flight MS (TOF-MS), and isotope-ratio mass spectrometry (IRMS), is reviewed. Enhancements to GC, for example large-volume injection, thermal desorption, fast GC, and coupling of GC to LC, are also discussed with regard to the determination of PAHs in an effort to demonstrate the vigor and robustness GC continues to achieve in the analytical sciences.