Pesticide analysis by high-performance liquid chromatography using the direct injection method

Metal Coordination-Driven Supramolecular Nanozyme as an Effective Colorimetric Biosensor for Neurotransmitters and Organophosphorus Pesticides

Analytical methods for detecting neurotransmitters (NTs) and organophosphorus (OP) pesticides with high sensitivity are vitally necessary for the rapid identification of physical, mental, and neurological illnesses, as well as to ensure food safety and safeguard ecosystems. In this work, we developed a supramolecular self-assembled system (SupraZyme) that exhibits multi-enzymatic activity. SupraZyme possesses the ability to show both oxidase and peroxidase-like activity, which has been employed for biosensing. The peroxidase-like activity was used for the detection of catecholamine NTs, epinephrine (EP), and norepinephrine (NE) with a detection limit of 6.3 µM and 1.8 µM, respectively, while the oxidase-like activity was utilized for the detection of organophosphate pesticides. The detection strategy for OP chemicals was based on the inhibition of acetylcholine esterase (AChE) activity: a key enzyme that is responsible for the hydrolysis of acetylthiocholine (ATCh). The corresponding limit of detection of paraoxon-methyl (POM) and methamidophos (MAP) was measured to be 0.48 ppb and 15.8 ppb, respectively. Overall, we report an efficient supramolecular system with multiple enzyme-like activities that provide a versatile toolbox for the construction of sensing platforms for the colorimetric point-of-care detection of both NTs and OP pesticides.

Magnetic Cu-MOFs embedded within graphene oxide nanocomposites for enhanced preconcentration of benzenoid-containing insecticides

Hybrid magnetic nanocomposites based on Cu-MOFs, graphene oxide (GO), and Fe₃O₄ nanoparticles (NPs) were prepared via chemical bonding approach, which GO were used as platforms to load nanostructured Cu-MOFs and Fe₃O₄ NPs. The composite features both magnetic separation characteristics and high MOFs porosity, making it an excellent adsorbent for magnetic solid-phase extraction (MSPE). The as-synthesized nanocomposites are characterized by XRD, TGA, SEM, TEM, nitrogen adsorption-desorption analysis and FT-IR spectroscopy. The composites are used in MSPE of six aromatic insecticides from various real samples prior to their quantification by HPLC. Amount of adsorbent, extraction times, extraction temperature, desorption times and oscillation rate are optimized. Under the optimal conditions, the method has a relative standard deviations (RSDs) of 1.9-2.7%, and good linearity (correlation coefficients higher than 0.9931). The low LOD and LOQ for six insecticides are found to be 0.30-1.58μgL^-1 and 1.0-5.2μgL^-1, respectively. The RSDs of within batch extraction are 1.6-9.5% and 3.9-12% for batch to batch extraction. The experimental results suggest that the nanocomposites have potential application for removal of hazardous pollutants from effluents.

Strong base pre-treatment for colorimetric sensor array detection and identification of N-methyl carbamate pesticides

A strategy of strong base pre-treatment was developed and employed to the colorimetric sensor array detection and differentiation of N-methyl carbamate pesticides.

Colorimetric sensor array for detection and identification of organophosphorus and carbamate pesticides

Due to relatively low persistence and high effectiveness for insect and pest eradication, organophosphates (OPs) and carbamates are the two major classes of pesticides that broadly used in agriculture. Hence, the sensitive and selective detection of OPs and carbamates is highly significant. In this current study, a colorimetric sensor array comprising five inexpensive and commercially available thiocholine and H2O2 sensitive indicators for the simultaneous detection and identification of OPs and carbamates is developed. The sensing mechanism of this array is based on the irreversible inhibition capability of OPs and carbamates to the activity of acetylcholinesterase (AChE), preventing production of thiocholine and H2O2 from S-acetylthiocholine and acetylcholine and thus resulting in decreased or no color reactions to thiocholine and H2O2 sensitive indicators. Through recognition patterns and standard statistical methods (i.e., hierarchical clustering analysis and principal component analysis), the as-developed array demonstrates not only discrimination of OPs and carbamates from other kinds of pesticides but, more interestingly, identification of them exactly from each other. Moreover, this array is experimentally confirmed to have high selectivity and sensitivity, good anti-interference capability, and potential applications in real samples for OPs and carbamates.

Eliminating solid phase extraction with large-volume injection LC/MS/MS: analysis of illicit and legal drugs and human urine indicators in U.S. wastewaters

Large-volume (1800 microL) injection (LVI) followed by liquid chromatography/tandem mass spectrometry was developed and optimized to eliminate the need for off- and on-line solid phase extraction as a sample preparation step. Centrifugation of raw municipal influent followed by LVI was optimized for the routine determination of illicit drugs and related substances in municipal wastewaters. The accuracy of the method is demonstrated by standard addition for analytes with concentrations ranging from 4 to 3,500,000 ng/L. Precision, as indicated by relative standard deviation is <12% within a day and < or =20% for between-days for analytes with corresponding stable-isotope-labeled internal standards. Instrumental detection limits range from 0.5 to 4 ng/L while lower limits of quantification range from 2.5 to 10 ng/L The method is demonstrated on wastewater treatment plant influents (24 h, flow-normalized) collected from seven municipalities located in the US. Methamphetamine concentrations and loads are the greatest yet reported while cocaine concentrations and index loads are similar to European locations. Creatinine is introduced as human urine indicatorthat can be potentially used as an alternative to population estimates for indexing illicit drug loads for different municipalities.

New approach to large-volume injection in reversed-phase high performance liquid chromatography: Determination of atrazine and hydroxyatrazine in soil samples

A well established method of direct injection of larger than conventional sample volumes ranging from 0.1 mL to 10 mL in HPLC is the injection valve method in which a loop of tubing is totally or partially filled with sample. Recent HPLC pumps have a flow-rate setting accuracy of +/- 1-2% over a flow-rate range from 0.1 mL/min to 10 mL/min and the flow stability is 0.2% or less. Quarternary low pressure gradient pumps are widely available and used, but all their hydraulic lines are seldom utilised. The idea of using one line of a common commercial HPLC quaternary low-pressure pump for direct on-column injection (pumping) of large sample volumes ranging from 1 mL to 100 mL was tested. This approach was evaluated during practical work on the development of an RP-HPLC method of determination of residual atrazine and hydroxyatrazine. In lysimetric environmental experiments hydroxyatrazine was formed in situ in a soil column by hydrolysis of atrazine. The results proved the applicability of this approach not only in experiments with model mixtures of analytes at microg/L levels in solutions. Analysis of 20 mL of soil leachates and extracts of soil samples containing atrazine and hydroxyatrazine at the 10 microg/kg level (in dry soil) revealed that good figures-of-merit were preserved, even in the presence of a large excess of humic substances.

Photocatalytic removal of fenitrothion in pure and natural waters by photo-Fenton reaction

The photocatalytic removal kinetics of fenitrothion at a concentration of 0.5mgl(-1) in pure and natural waters were investigated in Fe(III)/H2O2/UV-Vis, Fe(III)/UV-Vis and H2O2/UV-Vis oxidation systems, with respect to decreases in fenitrothion concentrations with irradiation time using a solar simulator. Fenitrothion concentrations were determined by HPLC analysis. Furthermore, total mineralization of fenitrothion in these systems was evaluated by monitoring the decreases in DOC concentrations with solar simulator irradiation time by TOC analysis. It was shown that the degradation rate of fenitrothion was much faster in the Fe(III)/H2O2/UV-Vis system than the Fe(III)/UV-Vis and H2O2/UV-Vis systems in both pure and river waters. Consequently, the mineralization rate of fenitrothion was much faster in the Fe(III)/H2O2/UV-Vis system than in the other two systems. The high *OH generation rate measured in the Fe(III)/H2O2/UV-Vis system was the key to faster degradation of fenitrothion. Increases in the concentrations of H2O2 and Fe led to better final degradation of fenitrothion. These results suggest that the photo-Fenton reaction (Fe(III)/H2O2/UV-Vis) system is likely to be an effective method for removing fenitrothion from contaminated natural waters.

Pesticide residues in thermal mineral water in Greece

Eight different hot springs (SPA) in Greece were monitored over a one-year survey for priority pesticide residues. A specific and effective procedure including solid phase extraction in combination with HPLC and GC analytical methods were applied. Samples that were sensitive to nitrogen-phosphorus (NPD) and/or electron capture (ECD) detectors were analysed by capillary gas chromatography. From the twenty-six water samples, pesticide residues were detected in fourteen of them (54%) but no one exceeding the European Union Maximum Acceptable Concentration (MAC). Lindane (gamma-BHC) was the most frequently detected pesticide. It was found in nine samples (35%) in concentrations from < 0.005 to 0.01 microg/L. Other pesticides detected were phorate (in five samples), propachlor (in two samples) and chlorpyriphos ethyl (in three samples) but in concentrations far below the permissible levels.

Analysis of pesticides by LC-electrospray-MS with postcolumn removal of nonvolatile buffers

Liquid chromatographic (LC) separations for pesticides and many other compounds make use of nonvolatile buffers in the mobile phase. The coupling of LC with mass spectrometry (MS) does not allow the use of nonvolatile buffers. Substitution with volatile buffers is possible, but changes in chromatographic retention and resolution can result even if pH is held constant. The postcolumn removal of nonvolatile buffers using a commercially available ion suppressor is evaluated for the analysis of carbamate pesticides. The suppressor efficiently removes phosphate anions from an LC mobile phase. Most compounds show an increased signal by factors of 2-7 after postcolumn phosphate removal. The suppressor has little effect on the chromatographic parameters of some compounds, while serious negative effects are noted for others. Some compounds will give poor results due to adsorption or retention by the suppressor. The results indicate that such a device may be useful for the LC-MS analysis of some pesticides using nonvolatile buffers.

Major degradation pathway of thiuram in tap water processed by oxidation with sodium hypochlorite

Thiuram (3 microM), a fungicide, was incubated in deionized water by adding 0-100 mg/L free chlorine at 30 degrees C for 30 min, and the solution was analyzed by HPLC and IC. The byproducts were identified by LC/MS, EI-MS, infrared, and (13)C NMR spectra and a reduction technique using 2-mercaptoethanol. On the basis of these results, it was found that the oxidation of thiuram with sodium hypochlorite initially produced an intermediate dimethylthiocarbamoyl dimethylcarbamoyl disulfide, which was finally degraded to bis(dimethylcarbamoyl) disulfide, its trisulfide, and dimethylamine. Subsequently, it was suggested that monitoring of bis(dimethylcarbamoyl) disulfide, its trisulfide, and dimethylamine should be included for the management and control of thiuram in tap water processed by oxidation with sodium hypochlorite.

Analysis of pesticides in environmental water samples by solid-phase micro-extraction-high-performance liquid chromatography

Solid-phase micro-extraction (SPME) followed by high-performance liquid chromatography (LC) has been applied to analyze pesticides in water samples. A device interfaces SPME to the LC injection process by solvent extracting analytes from the fiber and then introducing the solvent into the LC injector. LC analysis with UV detection was performed first with a conventional column (4.6 mm I.D.). To enhance efficiency of SPME, three extraction conditions, stirring, temperature and salt concentration, were optimized. Subsequently, semi-microcolumn LC (1.5 mm I.D.) was evaluated for this method, giving lower detection limits and less solvent consumption. Detection limits were within Japanese regulatory limits for drinking water. The SPME-LC method was applied to real-world environmental water samples.