Periplasmic accumulation of truncated forms of outer-membrane PhoE protein of Escherichia coli K-12

Uncovering the membrane-integrated SecAN protein that plays a key role in translocating nascent outer membrane proteins

A large number of nascent polypeptides have to get across a membrane in targeting to the proper subcellular locations. The SecYEG protein complex, a homolog of the Sec61 complex in eukaryotic cells, has been viewed as the common translocon at the inner membrane for targeting proteins to three extracytoplasmic locations in Gram-negative bacteria, despite the lack of direct verification in living cells. Here, via unnatural amino acid-mediated protein-protein interaction analyses in living cells, in combination with genetic studies, we unveiled a hitherto unreported SecA^N protein that seems to be directly involved in translocationg nascent outer membrane proteins across the plasma membrane; it consists of the N-terminal 375 residues of the SecA protein and exists as a membrane-integrated homooligomer. Our new findings place multiple previous observations related to bacterial protein targeting in proper biochemical and evolutionary contexts.

Assembly of bacterial outer membrane proteins

Various methods that are routinely used to study the subcellular localization of membrane proteins in wild-type Gram-negative bacteria fall short in genetic studies addressing the biogenesis of outer membrane proteins (OMPs). Here, we describe three biochemical methods that can be used in such studies to evaluate the proper assembly of OMPs into the outer membrane. The methods are based on (1) the differential electrophoretic mobility of folded and nonnative OMPs, (2) the intrinsically high protease resistance of folded OMPs, and (3) the observation that integral membrane proteins are not extracted from the membrane in solutions containing high concentrations of urea.

Omp85, an evolutionarily conserved bacterial protein involved in outer-membrane-protein assembly

The insertion of proteins into membranes generally requires the assistance of membrane proteins. A protein, designated Omp85 in Neisseria meningitidis, was shown to be required for the assembly of bacterial outer-membrane proteins. The protein is essential for the viability of the bacteria and is ubiquitous among Gram-negative bacteria. Omp85 depletion results in the accumulation of aggregates of unfolded outer-membrane proteins, and we argue that Omp85 is directly involved in outer-membrane-protein assembly. Omp85 shows sequence similarity with Toc75 of the chloroplast protein-import machinery, suggesting a common evolutionary origin.

Structure of the translocator domain of a bacterial autotransporter

Autotransporters are virulence-related proteins of Gram-negative bacteria that are secreted via an outer-membrane-based C-terminal extension, the translocator domain. This domain supposedly is sufficient for the transport of the N-terminal passenger domain across the outer membrane. We present here the crystal structure of the in vitro-folded translocator domain of the autotransporter NalP from Neisseria meningitidis, which reveals a 12-stranded beta-barrel with a hydrophilic pore of 10 x 12.5 A that is filled by an N-terminal alpha-helix. The domain has pore activity in vivo and in vitro. Our data are consistent with the model of passenger-domain transport through the hydrophilic channel within the beta-barrel, and inconsistent with a model for transport through a central channel formed by an oligomer of translocator domains. However, the dimensions of the pore imply translocation of the secreted domain in an unfolded form. An alternative model, possibly covering the transport of folded domains, is that passenger-domain transport involves the Omp85 complex, the machinery required for membrane insertion of outer-membrane proteins, on which autotransporters are dependent.

Interactions between phage-shock proteins in Escherichia coli

Expression of the pspABCDE operon of Escherichia coli is induced upon infection by filamentous phage and by many other stress conditions, including defects in protein export. Expression of the operon requires the alternative sigma factor sigma54 and the transcriptional activator PspF. In addition, PspA plays a negative regulatory role, and the integral-membrane proteins PspB and PspC play a positive one. In this study, we investigated whether the suggested protein-protein interactions implicated in this complex regulatory network can indeed be demonstrated. Antisera were raised against PspB, PspC, and PspD, which revealed, in Western blotting experiments, that PspC forms stable sodium dodecyl sulfate-resistant dimers and that the hypothetical pspD gene is indeed expressed in vivo. Fractionation experiments showed that PspD localizes as a peripherally bound inner membrane protein. Cross-linking studies with intact cells revealed specific interactions of PspA with PspB and PspC, but not with PspD. Furthermore, affinity-chromatography suggested that PspB could bind PspA only in the presence of PspC. These data indicate that regulation of the psp operon is mediated via protein-protein interactions.

The presence of a helix breaker in the hydrophobic core of signal sequences of secretory proteins prevents recognition by the signal-recognition particle in Escherichia coli

Signal sequences often contain alpha-helix-destabilizing amino acids within the hydrophobic core. In the precursor of the Escherichia coli outer-membrane protein PhoE, the glycine residue at position -10 (Gly-10) is thought to be responsible for the break in the alpha-helix. Previously, we showed that substitution of Gly-10 by alpha-helix-promoting residues (Ala, Cys or Leu) reduced the proton-motive force dependency of the translocation of the precursor, but the actual role of the helix breaker remained obscure. Here, we considered the possibility that extension of the alpha-helical structure in the signal sequence resulting from the Gly-10 substitutions affects the targeting pathway of the precursor. Indeed, the mutations resulted in reduced dependency on SecB for targeting in vivo. In vitro cross-linking experiments revealed that the G-10L and G-10C mutant PhoE precursors had a dramatically increased affinity for P48, one of the constituents of the signal-recognition particle (SRP). Furthermore, in vitro cross-linking experiments revealed that the G-10L mutant protein is routed to the SecYEG translocon via the SRP pathway, the targeting pathway that is exploited by integral inner-membrane proteins. Together, these data indicate that the helix breaker in cleavable signal sequences prevents recognition by SRP and is thereby, together with the hydrophobicity of the signal sequence, a determinant of the targeting pathway.

Defective translocation of a signal sequence mutant in a prlA4 suppressor strain of Escherichia coli

In the accompanying paper [Adams, H., Scotti, P.A., de Cock, H., Luirink, J. & Tommassen, J. (2002) Eur. J. Biochem.269, 5564-5571], we showed that the precursor of outer-membrane protein PhoE of Escherichia coli with a Gly to Leu substitution at position -10 in the signal sequence (G-10L) is targeted to the SecYEG translocon via the signal-recognition particle (SRP) route, instead of via the SecB pathway. Here, we studied the fate of the mutant precursor in a prlA4 mutant strain. prlA mutations, located in the secY gene, have been isolated as suppressors that restore the export of precursors with defective signal sequences. Remarkably, the G-10L mutant precursor, which is normally exported in a wild-type strain, accumulated strongly in a prlA4 mutant strain. In vitro cross-linking experiments revealed that the precursor is correctly targeted to the prlA4 mutant translocon. However, translocation across the cytoplasmic membrane was defective, as appeared from proteinase K-accessibility experiments in pulse-labeled cells. Furthermore, the mutant precursor was found to accumulate when expressed in a secY40 mutant, which is defective in the insertion of integral-membrane proteins but not in protein translocation. Together, these data suggest that SecB and SRP substrates are differently processed at the SecYEG translocon.

The early interaction of the outer membrane protein phoe with the periplasmic chaperone Skp occurs at the cytoplasmic membrane

Spheroplasts were used to study the early interactions of newly synthesized outer membrane protein PhoE with periplasmic proteins employing a protein cross-linking approach. Newly translocated PhoE protein could be cross-linked to the periplasmic chaperone Skp at the periplasmic side of the inner membrane. To study the timing of this interaction, a PhoE-dihydrofolate reductase hybrid protein was constructed that formed translocation intermediates, which had the PhoE moiety present in the periplasm and the dihydrofolate reductase moiety tightly folded in the cytoplasm. The hybrid protein was found to cross-link to Skp, indicating that PhoE closely interacts with the chaperone when the protein is still in a transmembrane orientation in the translocase. Removal of N-terminal parts of PhoE protein affected Skp binding in a cumulative manner, consistent with the presence of two Skp-binding sites in that region. In contrast, deletion of C-terminal parts resulted in variable interactions with Skp, suggesting that interaction of Skp with the N-terminal region is influenced by parts of the C terminus of PhoE protein. Both the soluble as well as the membrane-associated Skp protein were found to interact with PhoE. The latter form is proposed to be involved in the initial interaction with the N-terminal regions of the outer membrane protein.

Topological investigations of the FomA porin from Fusobacterium nucleatum and identification of the constriction loop L6

Porin FomA in the outer membrane of Fusobacterium nucleatum is a trimeric protein, which exhibits permeability properties similar to that of the well-known enterobacterial diffusion porins. The proposed topology model of the FomA monomer depicts the beta-barrel motif typical of diffusion porins, consisting of 16 antiparallel beta-strands. To investigate the accuracy of the FomA model and assess the topological relationship with other porins, individual deletions of variable size in seven of the eight surface-exposed regions of the porin were genetically engineered. Deletions in the predicted loops L1 to L7 were tolerated by the FomA porins, as judged by a normal assembly in the outer membrane of Escherichia coli and a sustained pore-forming ability. Deletions in the largest proposed external region, loop L6, made the FomA porins considerably more permeable to antibiotics, indicating larger pore channels. The distinctly increased uptake rates and size exclusion limits displayed by the L6 deletion mutant porins, suggest that loop L6 folds back into the beta-barrel thereby constricting the native FomA channel. Thus, the position of the channel constriction loop appears to be shifted towards the C terminus in the FomA porin, as compared to the crystal structures of five non-specific diffusion porins.

The SurA periplasmic PPIase lacking its parvulin domains functions in vivo and has chaperone activity

The Escherichia coli periplasmic peptidyl-prolyl isomerase (PPIase) SurA is involved in the maturation of outer membrane porins. SurA consists of a substantial N-terminal region, two iterative parvulin-like domains and a C-terminal tail. Here we show that a variant of SurA lacking both parvulin-like domains exhibits a PPIase-independent chaperone-like activity in vitro and almost completely complements the in vivo function of intact SurA. SurA interacts preferentially (>50-fold) with in vitro synthesized porins over other similarly sized proteins, leading us to suggest that the chaperone-like function of SurA preferentially facilitates maturation of outer membrane proteins.

The assembly pathway of outer membrane protein PhoE of Escherichia coli

The assembly of the wild-type and several mutant forms of the trimeric outer membrane porin PhoE of Escherichia coli was investigated in vitro and in vivo. In in vivo pulse-chase experiments, approximately half of the wild-type PhoE molecules assembled within the 30-s pulse in the native conformation in the cell envelope. The other half of the molecules followed slower kinetics, and three intermediates in this multistep assembly process were detected: a soluble trypsin-sensitive monomer, a trypsin-sensitive monomeric form that was loosely associated with the cell envelope and a metastable trimer, which was integrated into the membranes and converted to the stable trimeric configuration within minutes. The metastable trimers disassembled during sample preparation for standard SDS/PAGE into folded monomers. In vitro, the isolated PhoE protein could efficiently be folded in the presence of N,N-dimethyldodecylamine-N-oxide (LDAO). A mutant PhoE protein, DeltaF330, which lacks the C-terminal phenylalanine residue, mainly followed the slower kinetic pathway observed in vivo, resulting in increased amounts of the various assembly intermediates. It appears that the DeltaF330 mutant protein is intrinsically able to fold, because it was able to fold in vitro with LDAO with similar efficiencies as the wild-type protein. Therefore, we propose that the conserved C-terminal Phe is (part of) a sorting signal, directing the protein efficiently to the outer membrane. Furthermore, we analysed a mutant protein with a hydrophilic residue introduced at the hydrophobic side of one of the membrane-spanning amphipathic beta strands. The assembly of this mutant protein was not affected in vivo or in vitro in the presence of LDAO. However, it was not able to form folded monomers in a previously established in vitro folding system, which requires the presence of lipopolysaccharides and Triton. Hence, a folded monomer might not be a true assembly intermediate of PhoE in vivo.

The biogenesis and assembly of bacterial membrane proteins

Bacterial proteins in the inner and outer membranes differ dramatically in their architecture. Although both types of proteins are transported across the inner membrane through a common pore, recent studies have identified distinct factors that target them to transport sites and catalyze proper folding.

Identification of positively charged residues of FomA porin of Fusobacterium nucleatum which are important for pore function

FomA porin is the major outer-membrane protein of Fusobacterium nucleatum. It exhibits the functional properties of a general diffusion porin, but has no sequence similarity to other porins. According to the proposed topology model, each monomer of this trimeric protein is a beta-barrel consisting of 16 transmembrane segments with eight surface-exposed loops. Several conserved charged residues are proposed to extend from the beta-barrel wall into the aqueous channel lumen, and may contribute to a transverse electric field similar to that at the pore constriction of porins with known structure. The goal of our study was to identify particular basic residues contributing to such an electric field in FomA. Several arginines and lysines were replaced by negatively charged glutamates or uncharged alanines. The mutated FomA porins were expressed in Escherichia coli, and the effects on pore function were studied in vivo, by assaying the uptake rate of beta-lactam antibiotics, and in vitro after reconstitution of the purified proteins in lipid bilayer membranes. Some of the point mutations had a significant impact on the channel properties. The substitution R92A produced a 130% increased permeability of the zwitterionic beta-lactam cephaloridine, and the cation selectivity of R92E increased by 70%. The effects of the R90E substitution on channel properties were similar. Most of the point mutations had a minor effect on the voltage gating of the FomA channel, resulting in an increased sensitivity, except for K78E, which showed a decreased sensitivity. The latter mutation had no effect on cation selectivity, but the K78A substitution improved the uptake rate of cephaloridine. The results presented here indicate that arginines 90 and 92 are probably part of the constriction zone of the FomA porin, and lysine 78 and arginines 115 and 117 are probably in close proximity to this region as well.

Distinct sensitivities of OmpF and PhoE porins to charged modulators

The inhibition of the anion-selective PhoE porin by ATP and of the cation-selective OmpF porin by polyamines has been previously documented. In the present study, we have extended the comparison of the inhibitor-porin pairs by investigating the effect of anions (ATP and aspartate) and positively charged polyamines (spermine and cadaverine) on both OmpF and PhoE with the patch-clamp technique, and by comparing directly the gating kinetics of the channels modulated by their respective substrates. The novel findings reported here are (1) that the activity of PhoE is completely unaffected by polyamines, and (2) that the kinetic changes induced by ATP on PhoE or polyamines on OmpF suggest different mechanisms of inhibition. ATP induces a high degree of flickering in the PhoE-mediated current and appears to behave as a blocker of ion flow during its presumed transport through PhoE. Polyamines modulate the kinetics of openings and closings of OmpF, in addition to promoting a blocker-like flickering activity. The strong correlation between sensitivity to inhibitors and ion selectivity suggests that some common molecular determinants are involved in these two properties and is in agreement with the hypothesis that polyamines bind inside the pore of cationic porins.

Targeting and assembly of periplasmic and outer-membrane proteins in Escherichia coli

Escherichia coli must actively transport many of its proteins to extracytoplasmic compartments such as the periplasm and outer membrane. To perform this duty, E. coli employs a collection of Sec (secretion) proteins that catalyze the translocation of various polypeptides through the inner membrane. After translocation across the inner membrane, periplasmic and outer-membrane proteins are folded and targeted to their appropriate destinations. Here we review our knowledge of protein translocation across the inner membrane. We also discuss the various signal transduction systems that monitor extracytoplasmic protein folding and targeting, and we consider how these signal transduction systems may ultimately control these processes.

Affinity of the periplasmic chaperone Skp of Escherichia coli for phospholipids, lipopolysaccharides and non-native outer membrane proteins. Role of Skp in the biogenesis of outer membrane protein

The Skp protein of Escherichia coli has been proposed to be a periplasmic molecular chaperone involved in the biogenesis of outer membrane proteins. In this study, evidence is obtained that Skp exists in two different states characterized by their different sensitivity to proteases. The conversion between these states can be modulated in vitro by phospholipids, lipopolysaccharides and bivalent cations. Skp is able to associate with and insert into phospholipid membranes in vitro, indicating that it may associate with phospholipids in the inner and/or outer membrane in vivo. In addition, it interacts specifically with outer membrane proteins that are in their non-native state. We propose that Skp is required in vivo for the efficient targeting of unfolded outer membrane proteins to the membrane.

Translocase-bound SecA is largely shielded from the phospholipid acyl chains

Protein translocation in Escherichia coli is mediated by the SecA ATPase bound to the SecYEG membrane protein complex. SecA translocation ATPase activity as well as protein translocation is dependent on the presence of negatively charged lipids. By using a phospholipid with an acyl chain linked photoactivatable group, the lipid accessibility of SecA bound at the translocase was explored. SecA bound to lipid vesicles containing negatively charged lipids was found to be readily accessible for labeling by the photoactivatable phospholipid. The presence of an excess amount of SecYEG complex resulted in a remarkable reduction in the amount of lipid-accessible SecA irrespective of the nucleotide-bound form of SecA. These data demonstrate that the SecYEG-bound SecA is largely shielded from the phospholipid acyl chains and suggest the presence of two distinct pools of membrane-bound SecA that differ in the degree of lipid association.

Identification and characterization of two quiescent porin genes, nmpC and ompN, in Escherichia coli BE

The genomic DNA of the BE strain of Escherichia coli has been scrutinized to detect porin genes that have not been identified so far. Southern blot analysis yielded two DNA segments which proved highly homologous to, yet distinct from, the ompC, ompF, and phoE porin genes. The two genes were cloned and sequenced. One of them, designated ompN, encodes a porin which, due to low levels of expression, has eluded prior identification. The functional properties (single-channel conductance) of the OmpN porin, purified to homogeneity, closely resemble those of the OmpC porin from E. coli K-12. The second DNA fragment detected corresponds to the nmpC gene, which, due to an insertion of an IS1 element in its coding region, is not expressed in E. coli BE.

Coupling site-directed mutagenesis with high-level expression: large scale production of mutant porins from E. coli

Combination of an origin repair mutagenesis system with a new mutS host strain increased the efficiency of mutagenesis from 46% to 75% mutant clones. Overexpression with the T7 expression system afforded large quantities of proteins from mutant strains. A series of E. coli BE host strains devoid of major outer membrane proteins was constructed, facilitating the purification of mutant porins to homogeneity. This allowed preparation of 149 porin mutants in E. coli used in detailed explorations of the structure and function of this membrane protein to high resolution.

Role of the constriction loop in the gating of outer membrane porin PhoE of Escherichia coli

Porins form voltage-gated channels in the bacterial outer membrane. These proteins are composed of three identical subunits, each forming a 16-stranded beta-barrel. In this study, the role in voltage gating of a loop that forms a constriction within the pore was studied. The channel characteristics of mutant PhoE porins, in which the tip of the constriction loop was connected to the barrel wall, were determined. Whereas the properties of several mutant channels were changed, all of these channels could still be closed at high potential, showing that a gross movement of the constriction loop within the channel is not implicated in voltage gating.

Folding of a bacterial outer membrane protein during passage through the periplasm

The transport of bacterial outer membrane proteins to their destination might be either a one-step process via the contact zones between the inner and outer membrane or a two-step process, implicating a periplasmic intermediate that inserts into the membrane. Furthermore, folding might precede insertion or vice versa. To address these questions, we have made use of the known 3D-structure of the trimeric porin PhoE of Escherichia coli to engineer intramolecular disulfide bridges into this protein at positions that are not exposed to the periplasm once the protein is correctly assembled. The mutations did not interfere with the biogenesis of the protein, and disulfide bond formation appeared to be dependent on the periplasmic enzyme DsbA, which catalyzes disulfide bond formation in the periplasm. This proves that the protein passes through the periplasm on its way to the outer membrane. Furthermore, since the disulfide bonds create elements of tertiary structure within the mutant proteins, it appears that these proteins are at least partially folded before they insert into the outer membrane.

Voltage sensing in the PhoE and OmpF outer membrane porins of Escherichia coli: role of charged residues

The porins PhoE and OmpF form anion and cation-selective pores, respectively, in the outer membrane of Escherichia coli. Each monomer of these trimeric proteins consists of a 16-stranded beta-barrel, which contains a constriction at half the height of the channel. The functional significance of a transverse electrical field that is formed by charged amino acid residues within the constriction zone was investigated. For this purpose, the PhoE residues R37, R75, K18 and E110 were substituted by neutral amino acids. The mutant pores allowed an increased permeation of beta-lactam antibiotics across the outer membrane in vivo, although the single channel conductance, measured in planar lipid bilayers, was not increased or even slightly decreased. Replacement of the positively charged residues resulted in a decreased voltage sensitivity, whereas the substitution of a negatively charged residue resulted in an increased voltage sensitivity. Similar substitutions in OmpF caused the opposite effects, i.e. the substitution of positive and negative charges resulted in increased and decreased voltage sensitivity, respectively. Together, the results suggest that opposite charges, i.e. positive charges in anion-selective and negative charges in cation-selective porins, act as sensors for voltage gating.

Role of the carboxy-terminal phenylalanine in the biogenesis of outer membrane protein PhoE of Escherichia coli K-12

Most bacterial outer membrane proteins contain a phenylalanine at their C terminus. It has been shown that this residue has an important role in the efficient and correct assembly of PhoE protein into the Escherichia coli outer membrane, since its substitution or deletion resulted in the accumulation of trypsin-sensitive monomers of this normally trimeric protein. Here, the role of the C-terminal Phe in the assembly of PhoE was studied in further detail. Immunocytochemical labelling on ultrathin cryosections revealed that a mutant PhoE protein that lacks the C-terminal Phe accumulates in the periplasm. However, when the expression levels of the altered species were reduced, the efficiency of outer membrane incorporation was increased and the lethal effects were alleviated. The role of the C-terminal Phe in protein folding, trimerization and outer membrane incorporation was further studied in vitro. Deletion of this residue interfered with the efficiency of the formation of an assembly-competent folded monomer, and the stability of this PhoE form was affected. The in vitro trimerization and insertion into outer membranes were not affected by the mutation.

On the targeting and membrane assembly of the Escherichia coli outer membrane porin, PhoE

Within gram-negative bacteria such as Escherichia coli, the outer membrane porins provide a relatively non-specific uptake route which is utilised by a wide range of solutes including many antibiotics. Understanding the targeting and membrane assembly of these proteins is therefore of importance and this mini review aims to discuss this process in light of present knowledge.

Demonstration of a folded monomeric form of porin PhoE of Escherichia coli in vivo

The porins in the outer membranes of gram-negative bacteria are trimeric proteins. A folded monomeric form of the Escherichia coli porin PhoE, with a higher electrophoretic mobility than that of the denatured protein, has recently been detected in in vitro folding studies. To investigate the possible biological significance of the folded monomer, we attempted to detect this form in vivo. After pulse-labeling, folded monomers could be detected by immunoprecipitation. Furthermore, folded monomers were detected in a preparation of mutant PhoE porins, in which the subunit interactions were weakened by a E-66-->R substitution. Together, these results show that the folded monomer is not an in vitro folding artifact but an integral part of the native trimer.

prlA suppressors in Escherichia coli relieve the proton electrochemical gradient dependency of translocation of wild-type precursors

The SecY protein of Escherichia coli is an integral membrane component of the protein export apparatus. Suppressor mutations in the secY gene (prlA alleles) have been isolated that restore the secretion of precursor proteins with defective signal sequences. These mutations have never been shown to affect the translocation of wild-type precursor proteins. Here, we report that prlA suppressor mutations relieve the proton-motive force (pmf) dependency of the translocation of wild-type precursors, both in vivo and in vitro. Furthermore, the proton-motive force dependency of the translocation of a precursor with a stably folded domain in the mature region was suppressed by prlA mutations in vitro. These data show that prlA mutations cause a general relaxation of the export apparatus rather than a specific change that results in bypassing of the recognition of the signal sequence. In addition, these results are indicative for a mechanism in which the proton-motive force stimulates translocation by altering the conformation of the translocon.

In vitro insertion and assembly of outer membrane protein PhoE of Escherichia coli K-12 into the outer membrane. Role of Triton X-100

The assembly of the in vitro synthesized outer membrane protein PhoE into purified outer membranes was investigated. The assembly appeared to be strongly stimulated by the presence of low amounts of Triton X-100 (optimal 0.08%, w/v). The role of Triton X-100 in the in vitro system was further examined. Pretreating outer membranes with Triton X-100 did not make the membranes competent for correct assembly, indicating that the detergent did not act on the membrane but at the protein level. PhoE became assembly-incompetent with a half-life of approximately 12 min and 90 s at 37 degrees C in the absence and presence, respectively, of 0.08% Triton X-100. Apparently, Triton X-100 induces an assembly-competent state in the PhoE protein with a very short half-life. Furthermore, the efficiency of correct assembly of PhoE was greatly reduced when outer membranes of deep rough lipopolysaccharide mutants were used, indicating an important role of lipopolysaccharides in the assembly of the porin.

Delta mu H+ dependency of in vitro protein translocation into Escherichia coli inner-membrane vesicles varies with the signal-sequence core-region composition

Signal sequences frequently contain alpha-helix-destabilizing amino acids in the hydrophobic core. Nuclear magnetic resonance studies on the conformation of signal sequences in membrane mimetic environments revealed that these residues cause a break in the alpha-helix. In the precursor of the Escherichia coli outer membrane protein PhoE (pre-PhoE), a glycine residue at position -10 (Gly -10) is thought to be responsible for the break in the alpha-helix. We investigated the role of this glycine residue in the translocation process by employing site-directed mutagenesis. SDS-PAGE analysis showed drastic variations in the electrophoretic mobilities of the mutant precursor proteins, suggesting an important role of the glycine residue in determining the conformation of the signal sequence. In vivo, no drastic differences in the translocation kinetics were observed as compared with wild-type PhoE, except when a charged residue (Arg) was substituted for Gly -10. However, the in vitro translocation of all mutant proteins into inverted inner-membrane vesicles was affected. Two classes of precursors could be distinguished. Translocation of one class of mutant proteins (Ala, Cys and Leu for Gly -10) was almost independent of the presence of a delta mu H+, whereas translocation of the other class of precursors (wild type or Ser) was strongly decreased in the absence of the delta mu H+. Apparently, the delta mu H+ dependency of in vitro protein translocation varies with the signal-sequence core-region composition. Furthermore, a proline residue at position -10 resulted in a signal sequence that did not prevent the folding of the precursor in an in vitro trimerization assay.

Influence of the signal sequence and chaperone SecB on the interaction between precursor protein prePhoE and phospholipids

To investigate in a direct way the interaction between a precursor protein and phospholipids, monolayer studies were performed using the purified precursor of Escherichia coli outer-membrane protein PhoE. It was demonstrated that prePhoE can insert efficiently into monolayers of dioleoylglycerophosphoglycerol (Ole2GroPGro) and dioleoylglycerophosphoethanolamine (Ole2GroPEtn), this insertion was mainly driven by hydrophobic forces. Compared with previous results obtained with PhoE signal peptide, the full-length precursor protein does not show the specific interaction with acidic lipids. PrePhoE inserted into a Ole2GroPGro monolayer occupies an area of 28 +/- 3 [corrected] nm2/molecule, which is approximately 10-fold larger than the area occupied by the PhoE signal peptide. The purified mature PhoE protein has a lower capacity to insert into Ole2GroPGro and Ole2GroPEtn monolayers and is, in contrast to prePhoE, fully accessible to proteinase K after interacting with a Ole2GroPGro monolayer. The results demonstrate that in the context of the precursor protein both the signal sequence and mature domain of prePhoE insert into lipid monolayers. It was found that PhoE, like prePhoE, can form in vitro a complex with the cytosolic chaperone SecB. Complexation with SecB increases the insertion of (pre)PhoE into acidic lipid monolayers. The high lipid affinity of prePhoE was also demonstrated by vesicle-binding experiments which showed that SecB dissociates from the SecB-prePhoE complex upon binding of the precursor to the bilayer. The implications of these findings for preprotein translocation are discussed and in addition some extrapolations to the insertion of PhoE into the outer membrane are made.

Induction of the phoE promoter upon invasion of Salmonella typhimurium into eukaryotic cells

Live attenuated Salmonella typhimurium strains expressing foreign antigens can be used for vaccination purposes. Due to deleterious effects of constitutive, high-level expression of the heterologous antigens, there is often strong selection pressure against plasmids encoding these antigens, resulting in rapid segregation in vivo. In vivo-inducible promoters may be a good alternative for constitutive promoters. The outer membrane protein PhoE of Escherichia coli is being used as a carrier for foreign antigenic determinants. Here we studied whether its expression from a plasmid is induced in S. typhimurium upon invasion of eukaryotic cells. This appeared to be the case. Furthermore, a S. typhimurium phoE mutant was constructed and the effects of the mutation on invasion, intracellular survival and virulence were studied. Survival in HEp-2 cells or in the macrophage-like cell line J744 was not, or only slightly, affected. Furthermore, the mutant appeared to be as virulent for mice as the wild-type strain.

In vitro folding of Escherichia coli outer-membrane phospholipase A

Recombinant outer-membrane phospholipase A (OMPLA) of Escherichia coli was expressed without its signal sequence from the T7 phi 10 promoter. As a result of the cloning strategy the protein had an N-terminal extension of six amino acid residues. The protein accumulated in the cytosol in inclusion bodies. Conditions were established for the efficient folding of OMPLA in vitro in the presence of Triton X-100. After in vitro folding, the protein was present as a mixture of folded and unfolded forms. Ion-exchange chromatography was used for the purification of OMPLA and the separation of correctly folded, enzymically active enzyme from unfolded inactive protein. The final protein preparation was pure and fully heat-modifiable based on SDS/PAGE. The recombinant enzyme had a specific activity of 71 U/mg, which is similar to the value of the wild-type enzyme, purified from the membrane. The final yield of active enzyme was 35 mg protein/l culture of an A600 of 6. Circular dichroism spectroscopy revealed a high content of beta strand, in good agreement with a predicted beta-barrel structure of this outer-membrane protein.

The pho regulon of Shigella flexneri

Growth of Escherichia coli K-12 in low-phosphate conditions results in the induction of the synthesis of many proteins, including the outer membrane porin PhoE, alkaline phosphatase, and the Pst system for the transport of phosphate (P1). This response is controlled by a two-component regulatory system of which PhoB and PhoR are the response-regulator and the sensor/kinase, respectively. When Shigella flexneri was starved for P1, neither PhoE nor alkaline phosphatase was produced. However, induction of the synthesis of the PstS protein was observed, indicating that S. flexneri contains a functional PhoB/PhoR regulatory system. Consistent with this notion, the introduction of the E. coli phoA gene in S. flexneri resulted in the induction of alkaline phosphatase synthesis under phosphate limitation. However, introduction of phoE on a plasmid did not lead to the expression of PhoE protein, indicating that S. flexneri PhoB does not recognize the phoE promoter region. The phoB gene was cloned and sequenced and in the deduced amino acid sequence two deviations from that of E. coli PhoB were detected. Site-directed mutagenesis revealed that one of these deviations, i.e. Leu-172, which is Arg in E. coli PhoB, is responsible for the lack of expression of the PhoE protein in S. flexneri.

A novel plasmid series for in vitro production of phoA translational fusions and its use in the construction of Escherichia coli PhoE::PhoA hybrid proteins

We have developed a series of vectors for easy construction of translational fusions with the phoA gene (encoding the periplasmic alkaline phosphatase, PhoA) in the three reading frames. One plasmid series carries a multiple cloning site (MCS) followed by a promoterless and leaderless 5'-truncated phoA ('phoA), which in turn is followed by a kanamycin-resistance-encoding gene (kan). Another plasmid series contains two identical inverted MCS flanking the phoA-kan cluster. These latter vectors are devised as phoA-kan cassette delivery vectors. In-frame cloning results in the production of hybrid PhoA proteins which display PhoA activity if successfully exported beyond the cytoplasmic membrane. In order to test these vectors, we have constructed hybrid PhoE::PhoA proteins, which were used to analyze the activity of the phoE promoter and identify the hybrid gene products.

Thirty-three amino acids of the mature moiety of an unprocessed maltose-binding protein are sufficient for export in Escherichia coli

Maltose-binding protein (MBP) is translocated across the cytoplasmic membrane of Escherichia coli; successful export depends on information in both the signal peptide and the mature moiety of the protein. To determine the shortest portion of the mature region that would maintain detectable entry of MBP into the export pathway, we took advantage of the properties of an MBP species with proline substituted in the +1 position relative to the cleavage site (MBP27-P). This protein efficiently crosses the cytoplasmic membrane but is not processed and acts as a competitive inhibitor of signal peptidase I (leader peptidase). Export of MBP27-P is measured by the inhibition of processing of other proteins, such as ribose-binding protein (RBP). A series of truncated derivatives of MBP27-P were tested for the ability to inhibit processing of RBP. An MBP27-P species with only 33 amino acids of the mature moiety inhibited processing of RBP, indicating that this truncated polypeptide was probably exported and interacted with signal peptidase I.

Immunogenicity of a mycobacterial T-cell epitope expressed in outer membrane protein PhoE of Escherichia coli

The outer membrane protein PhoE of Escherichia coli can be used for the expression of foreign antigenic determinants. Previously, a T-cell epitope of the 65 kDa heat shock protein (hsp65) of Mycobacterium tuberculosis, comprising amino acids 180 to 188, was expressed in PhoE. The hybrid protein induced proliferation of epitope-specific T-cell clones in vitro. In this report, the potential of the hybrid protein to induce an in vivo T-cell response against the 180-188 T-cell epitope was assessed. Popliteal lymph node cells, isolated from rats immunized with PhoE containing the hsp65 epitope, showed high proliferative responses to a synthetic peptide consisting of amino acids 180 to 188 of hsp65, indicating that the epitope is immunogenic in the PhoE-associated conformation.

Effect of different positively charged amino acids, C-terminally of the signal peptidase cleavage site, on the translocation kinetics of a precursor protein in Escherichia coli K-12

Introduction of positively charged amino acids immediately downstream of the signal sequence in prokaryotic precursor proteins is known to affect the export process. However, it is not clear whether different positively charged amino acids affect the export process similarly. To investigate this, the glutamate at position +2 of outer membrane protein PhoE was substituted by arginine, lysine or histidine. Pulse-chase experiments revealed that the Lys and Arg residues at position +2 caused a reduced processing rate, and that the effect was markedly more severe in the case of the Arg residue. Trypsin accessibility experiments revealed that the accumulated precursors were present in the cytoplasm. Since the degree of the inhibitory effect corresponded to the pKa of the different positively charged amino acids, this suggests that the positively charged residues must be deprotonated during the secretory process.

Expression of the pspA gene stimulates efficient protein export in Escherichia coli

Expression of several mutant forms of outer membrane protein PhoE of Escherichia coli, which are disturbed in normal biogenesis, resulted in high expression of a 26 kDa protein. This 26 kDa protein fractionated as a peripherally bound inner membrane protein. It appeared to be identical to a previously identified protein (PspA = phage shock protein A) of unknown function that is induced upon infection of E. coli with filamentous phages. PspA was not expressed upon synthesis of mutant PhoE proteins in a secB mutant, nor upon expression of a PhoE mutant that lacks the signal sequence, suggesting that entrance into the export pathway of prePhoE is essential for induction. PspA synthesis was also induced under other conditions that are known to block the export apparatus, i.e. in secA, secD and secF mutants when grown at their non-permissive temperature or upon induction of the synthesis of MalE-LacZ or LamB-LacZ hybrid proteins. The inducing conditions for PspA synthesis suggested a role for this protein in export. In vivo pulse-chase experiments showed that the translocation of (mutant) prePhoE and of the precursors of other exported proteins was retarded in a pspA mutant strain. Also, in in vitro translocation assays, a role for PspA in protein transport could be demonstrated.

Topology of PhoE porin: the 'eyelet' region

A model for the topology of the PhoE porin has been proposed according to which the polypeptide traverses the outer membrane sixteen times mostly as amphipathic beta-sheets, thereby exposing eight loops at the cell surface. Until now, no evidence has been obtained for the surface exposure of the third loop. Recently, the structure of porin of Rhodobacter capsulatus has been determined. The proposed model of PhoE is very similar to the structure of the R. capsulatus porin, which has an 'eyelet' region, extending into the interior of the pore. The proposed third external loop of PhoE might form a similar 'eyelet' region. To determine the location of the predicted third external loop of PhoE, multiple copies of an oligonucleotide linker encoding an antigenic determinant of VP1 protein of foot-and-mouth disease virus (FMDV) were inserted. All hybrid proteins were properly inserted in the outer membrane. The monoclonal antibody MA11, directed against the linear FMDV epitope, was able to bind only to intact cells expressing a hybrid PhoE protein with at least three copies of the FMDV epitope present. Antibiotic sensitivity tests and single-channel conductance measurements revealed that the insertions influenced the channel size. These results are consistent with a location of the third loop of PhoE within the pore channel.

Characterization of the Salmonella typhimurium phoE gene and development of Salmonella-specific DNA probes

In Escherichia coli K-12, the phoE gene, encoding a phosphate-limitation-inducible outer membrane pore protein (PhoE), is closely linked to the genes proA and proB. When the corresponding fragment of the Salmonella typhimurium chromosome was transferred to E. coli K-12 using an RP4::miniMu plasmid, pULB113, no production of S. typhimurium PhoE could be detected. Nevertheless, DNA hybridization studies revealed that the corresponding plasmid did contain S. typhimurium phoE. Production of S. typhimurium PhoE in E. coli was detected only after subcloning the gene in a multicopy vector. Nucleotide (nt) sequence analysis showed extensive homology of S. typhimurium phoE to the E. coli gene and suggested possible explanations for the low expression of S. typhimurium phoE in E. coli. In addition, the sequence information was used to develop Salmonella-specific DNA probes. Two oligodeoxyribonucleotides were synthesized based on nt sequences encoding the fifth and eighth cell-surface-exposed regions of PhoE. When used in polymerase chain reactions, these probes turned out to be specific, i.e., no crossreactions occurred with the non-Salmonella strains, whereas 132 out of 133 tested Salmonella strains were recognized.

Sorting of protein A to the staphylococcal cell wall

The cell wall of gram-positive bacteria can be thought of as representing a unique cell compartment, which contains anchored surface proteins that require specific sorting signals. Some biologically important products are anchored in this way, including protein A and fibronectin binding protein of Staphylococcus aureus and streptococcal M protein. Studies of staphylococcal protein A and Escherichia coli alkaline phosphatase show that the signal both necessary and sufficient for cell wall anchoring consists of an LPXTGX motif, a C-terminal hydrophobic domain, and a charged tail. These sequence elements are conserved in many surface proteins from different gram-positive bacteria. We propose the existence of a hitherto undescribed sorting mechanism that positions proteins on the surface of gram-positive bacteria.

Transport and anchoring of beta-lactamase to the external surface of Escherichia coli

The outer membrane of Gram-negative bacteria presents an effective barrier that restricts the release of proteins from the cell. Virtually all extracellular proteins of Gram-negative bacteria are exported by specialized systems requiring the action of several gene products. We have constructed a tripartite fusion consisting of (i) the signal sequence and first nine N-terminal amino acids of the mature major Escherichia coli lipoprotein, (ii) amino acids 46-159 of the outer membrane protein OmpA, and (iii) the complete mature beta-lactamase (EC 3.5.2.6) sequence. This protein had an enzymatically active beta-lactamase and was found predominantly in the outer membrane. Immunofluorescence microscopy, the accessibility of the fusion protein to externally added proteases, and the rates of hydrolysis of nitrocefin and penicillin G by whole cells demonstrated that a substantial fraction (20-30%) of the beta-lactamase domain of the fusion protein was exposed on the external surface of E. coli. In cells grown at 24 degrees C the localization of beta-lactamase on the cell surface was almost quantitative (greater than 80% of the enzymatically active protein was exposed to the extracellular fluid) as determined by nitrocefin and penicillin G hydrolysis and trypsin accessibility. These results demonstrated that a soluble protein, beta-lactamase, can be transported through--and become anchored on--the outer membrane by fusion to the proper targeting and localization signals.