Selenium in environmental waters: Determination, speciation and concentration levels

Zinc ferrite nanoparticles from industrial waste for Se (IV) elimination from wastewater

The presence of high concentrations of selenium ions in wastewater is considered an environmental problem. However, the mechanism of selenium ions (Se (IV)) removal by the adsorption process has not been investigated in-depth so far. Also, the recovery and conversion of the industrial waste materials into valuable materials is a vital issue. Therefore, in this study, zinc ferrite nanopowders are economically synthesized from steel-making wastes by co-precipitation method for investigating as adsorbents of selenium species. The produced nanopowders were annealed at 150, 300, 500, and 850 °C for 5 h to scrutinize the impact of annealing temperature on their crystallite size. The compositional, optical, and magnetic features of the nanopowders were defined by X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM) and transmission electron microscopy (TEM), UV-Vis. spectrophotometer along with vibrating sample magnetometer (VSM). Optical absorbance spectra were found characteristic due to the electronic structure of Fe³⁺ (3d⁵) considering the C_3v local symmetry of Fe³⁺ ions. The prepared nanopowders demonstrated good adsorption capacity toward selenium ions (43.67 mg/g at pH 2.5) from an aqueous medium. Adsorption data were found fitting to Freundlich isotherm model. Thus, ZnFe₂O₄ can be recommended to effectively eliminate selenium ions from aqueous solutions.

A comprehensive review on environmental transformation of selenium: recent advances and research perspectives

Selenium (Se) is an important micronutrient and essential trace element for both humans and animals, which exist in the environment ubiquitously. Selenium deficiency is an important issue worldwide, with various reported cases of its deficiency. Low selenium contents in some specific terrestrial environments have resulted in its deficiency in humans. However, high levels of selenium in the geochemical environment may have harmful influences and can cause a severe toxicity to living things. Due to its extremely narrow deficiency and toxicity limits, selenium is becoming a serious matter of discussion for the scientists who deals with selenium-related environmental and health issues. Based on available relevant literature, this review provides a comprehensive data about Se sources, levels, production and factors affecting selenium bioavailability/speciation in soil, characteristics of Se, biogeochemical cycling, deficiency and toxicity, and its environmental transformation to know the Se distribution in the environment. Further research should focus on thoroughly understanding the concentration, speciation, Se cycling in the environment and food chain to effectively utilize Se resources, remediate Se deficiency/toxicity, and evaluate the Se states and eco-effects on human health.

In Situ Selective Measurement of SeIV in Waters and Soils: Diffusive Gradients in Thin-Films with Bi-Functionalized Silica Nanoparticles

The speciation of selenium (Se) controls its fate and behavior, determining both its biological and environmental activities. However, in situ monitoring of Se^IV presents a significant challenge due to its sensitivity to redox change. A novel diffusive gradients in thin films (DGT) technique containing mercapto-, amino-bifunctionalized SBA15 mesoporous silica nanoparticles was developed and evaluated in a series of laboratory and field deployment tests. The SBA-DGT exhibited a linear accumulation of Se^IV ( r² > 0.997) over a 72 h deployment, with negligible accumulation of Se^VI(<5%). Consistent prediction of Se^IV occurred within ionic strength and pH ranges of 0.1-200 mmol L^-1 and 3.6-8, respectively. Limits of detection of the SBA-DGT were 0.03 μg Se^IV L^-1, which is suitable for natural waters. Moreover, the properties of the bifunctionalized SBA15 enable it to be fabricated within ultrathin (0.05 mm) gel layers for use in conjunction with O₂ planar optode imaging. This new sandwich sensor technology with SBA-DGT was validated by mapping the two-dimensional distribution of Se^IV and oxygen simultaneously in rice rhizospheres. This study shows that SBA-DGT provides a selective measurement of Se^IV in situ, demonstrating its potential for both environmental monitoring and as a research tool for improving our understanding of Se biogeochemical processes.

Groundwater co-contaminant behavior of arsenic and selenium at a lead and zinc smelting facility

Co-contaminant behavior of arsenic (As) and selenium (Se) in groundwater is examined in this study at a former lead and zinc smelting facility. We collected water quality data, including concentrations of trace metals, major ions, and metalloid speciation, over a 15-year period to document long-term trends and relationships between As, Se, geochemical parameters, and other redox-sensitive trace metals. Concentrations of dissolved As and Se were negatively correlated (Kendall's Tau B correlation coefficient, r = -0.72) and showed a distinctive L-shaped relationship. High-concentration arsenic wells (>5 mg L-1) were characterized by intermediate oxidation-reduction conditions (75 < Eh < 275 mV), near-neutral pH (6.1-7.9), low Ca/Na ratios, elevated Fe and Mn concentrations, and high proportions of As(III) relative to total dissolved As. High-concentration Se wells (>500 μg L-1) were characterized by more positive Eh (305-500 mV), low Fe concentrations, and high proportions of As(V). Batch micocosm experiments showed that aquifer solids contain mineral surfaces and/or microbial communities capable of removing selenate from groundwater. Electron microprobe and Se K-edge X-ray absorption near-edge spectroscopic analyses demonstrated that Se was predominantly associated with elemental Se in the reduced aquifer solids. Factor analysis revealed three discernible groupings of trace metals. Group I includes U, Se, and nitrate-N, all of which are mobile under oxygenated to moderately oxygenated conditions. Group II includes elements that are mobile under Fe(III)-reducing conditions: Fe, total dissolved As, As(III), and ammonium-N. Group III elements (Mo, Sb, and V) showed mobility across the entire range of redox conditions encountered in site groundwater; As(V) clustered with this group of elements. Geochemical modeling suggests that As and Se species were in a state of disequilibrium with respect to measured parameters indicative of redox conditions, although predicted patterns of redox-controlled mobility and attenuation were confirmed. This analysis is important to better understand groundwater contaminant behavior in response to redox conditions ranging from oxic/suboxic to Fe(III)-reducing, but excluding sulfate-reducing conditions.

Selenium accumulation and metabolism in algae

Selenium (Se) is an intriguing element because it is metabolically required by a variety of organisms, but it may induce toxicity at high doses. Algae primarily absorb selenium in the form of selenate or selenite using mechanisms similar to those reported in plants. However, while Se is needed by several species of microalgae, the essentiality of this element for plants has not been established yet. The study of Se uptake and accumulation strategies in micro- and macro-algae is of pivotal importance, as they represent potential vectors for Se movement in aquatic environments and Se at high levels may affect their growth causing a reduction in primary production. Some microalgae exhibit the capacity of efficiently converting Se to less harmful volatile compounds as a strategy to cope with Se toxicity. Therefore, they play a crucial role in Se-cycling through the ecosystem. On the other side, micro- or macro-algae enriched in Se may be used in Se biofortification programs aimed to improve Se content in human diet via supplementation of valuable food. Indeed, some organic forms of selenium (selenomethionine and methylselenocysteine) are known to act as anticarcinogenic compounds and exert a broad spectrum of beneficial effects in humans and other mammals. Here, we want to give an overview of the developments in the current understanding of Se uptake, accumulation and metabolism in algae, discussing potential ecotoxicological implications and nutritional aspects.

Enhanced Adsorption of Selenium Ions from Aqueous Solution Using Iron Oxide Impregnated Carbon Nanotubes

The aim of this research was to investigate the potential of raw and iron oxide impregnated carbon nanotubes (CNTs) as adsorbents for the removal of selenium (Se) ions from wastewater. The original and modified CNTs with different loadings of Fe₂O₃ nanoparticles were characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray diffractometer (XRD), Brunauer, Emmett, and Teller (BET) surface area analyzer, thermogravimetric analysis (TGA), zeta potential, and energy dispersive X-ray spectroscopy (EDS). The adsorption parameters of the selenium ions from water using raw CNTs and iron oxide impregnated carbon nanotubes (CNT-Fe₂O₃) were optimized. Total removal of 1 ppm Se ions from water was achieved when 25 mg of CNTs impregnated with 20 wt.% of iron oxide nanoparticles is used. Freundlich and Langmuir isotherm models were used to study the nature of the adsorption process. Pseudo-first and pseudo-second-order models were employed to study the kinetics of selenium ions adsorption onto the surface of iron oxide impregnated CNTs. Maximum adsorption capacity of the Fe₂O₃ impregnated CNTs, predicted by Langmuir isotherm model, was found to be 111 mg/g. This new finding might revolutionize the adsorption treatment process and application by introducing a new type of nanoadsorbent that has super adsorption capacity towards Se ions.

Comparative effects of selenate and selenite on selenium accumulation, morphophysiology, and glutathione synthesis in Ulva australis

The capacity of Ulva australis Areschoug to tolerate and accumulate selenium (Se) supplied in the form of selenate or selenite was investigated. The macroalga was provided for 3 and 7 days with concentrations of selenate (Na2SeO4) or selenite (Na2SeO3) ranging from 0 to 400 μM. U. australis exhibited the highest ability to accumulate selenium when fed with 100 μM selenate and 200 μM selenite after 7 days, and accumulation values were respectively 25 and 36 ppm Se. At the same concentrations, stimulation of the synthesis of chlorophylls and carotenoids was observed. Elevated doses of selenate or selenite decreased Se accumulation inside algal cells, perhaps through repression of membrane transporters. This effect was more pronounced in thalli cultivated with selenate. There were no morphological and ultrastructural alterations in thalli exposed to Se. However, selenite induced the increase of the oxidized fraction of glutathione (GSSG), perhaps because of its capacity to bind the thiol group of reduced glutathione (GSH). In conclusion, this study highlights the capacity of U. australis to resist to very high concentrations of selenite and selenate, which are normally toxic to other organisms. Also, the lack of bioconcentration in U. australis indicates that this alga does not facilitate delivery of Se in the food chain and remains safe for consumption when it grows in water bodies contaminated with Se. Its potential for the removal of excess Se from water bodies appears limited.

The bioavailability of selenium and risk assessment for human selenium poisoning in high-Se areas, China

Enshi prefecture of Hubei Province is well known for human selenium (Se) poisoning in the early 1960s in China. Sporadic cases of Se poisoning in livestocks are still being found. In this study, Se levels in water, cropland soils and various crops from high-Se areas of Enshi were measured to investigate the distribution and bioavailability of Se in the environments, as well as probable daily intake (PDI) of Se for local residents. The total Se in surface water ranged from 2.0 to 519.3μg/L with a geometric mean of 46.0±127.8 μg/L (n=48), 70.5-99.5% of which was present in the form of Se(VI). The soil Se concentration varied from 2.89 to 87.3 μg/g with a geometric mean of 9.36±18.6 μg/g (n=45), and most of Se was associated with organic matter (OM-Se). The total Se in rice, corn, and vegetable samples were 2.11±2.87 μg/g (n=21), 3.76±11.6 μg/g (n=16), and 2.09±3.38 μg/g (n=25), respectively. Stream water Se is likely leached from carbonaceous shale and mine wastes, leading to Se accumulation in paddy soils. OM-Se may play an important role in Se uptake by rice plant in high-Se area of Enshi. The PDI of Se is approximately 2144 μg/day, and Se concentration in blood is estimated at about 3248 μg/L, posing a potential chronic Se poisoning risk to local residents. Cereal consumption (48.5%) makes a great contribution to human daily Se intake, followed by vegetables (36.6%), meats (8.5%), and drinking water (6.4%). However, when assessing health risk on human in high-Se areas, the contribution of drinking water to daily Se intake cannot be ignored due to high Se content and dominant Se(VI) species. Local inhabitants should be advised not to grow crops in high-Se lands or irrigate using high-Se water. If possible, they should drink pipe water and consume foods mixed with those from outside the high-Se areas.

Determination of selenium in freshwaters by cathodic stripping voltammetry after UV irradiation

An analytical method was developed for the determination of total dissolved selenium in fresh waters, using linear sweep cathodic stripping voltammetry (CSV) in combination with UV photolytic digestion. Both the CSV method, based on the electrodeposition and stripping of Cu(2)Se, and the UV irradiation procedure were investigated in detail. In the presence of dissolved organic substances, as in freshwaters, Se(VI) is reduced to Se(IV) by UV irradiation in 0.1M hydrochloric acid. Glucose can be used as the carbon source in samples low in natural dissolved organic carbon (DOC). The photolytic yields of Se(IV) were about 90% in both cases. Five freshwater samples were analysed for total selenium by CSV after UV photolysis, and by hydride generation atomic absorption spectrometry (HG-AAS) after oxidative digestion followed by reduction with hydrochloric acid. The results agreed well and the concentrations were in the range 70-190 ng/l., well above the detection limit of the CSV method at 2 ng/l.

Advantages of hydride generation interface for selenium speciation in waters by high performance liquid chromatography-inductively coupled plasma mass spectrometry coupling

This paper focuses on the analytical performance improvement of the coupled technique HPLC-ICPMS using on-line collision/reaction cell technology for selenium elemental and speciation analyses at the ng (Se) l(-1) level in aquatic environment. Collision/reaction cell operating parameters were optimised, resulting in selected conditions of 5.5 ml min(-1) H(2) and 0.5 ml min(-1) He mixture. The detection limits obtained were around 5 ng (Se) l(-1) for total analysis, and between 7 and 15 ng (Se) l(-1) depending on the species for speciation analysis. The capability of UV irradiation-hydride generation interfacing to increase detector sensitivity was also evaluated for speciation analysis. The detection limits obtained were in the range 2-8 ng (Se) l(-1) depending on the species. Moreover, such interface allowed to prevent bromine introduction to the ICPMS which is particularly convenient for selenium trace analysis in natural waters as (80)Se is preserved free from BrH interferences. The developed method was validated using certified water with low selenium content (TM Rain 95, NWRI, Canada) and applied to the analysis of different waters.

Determination of trace selenium by solid substrate-room temperature phosphorescence enhancing method based on potassium chlorate oxidizing phenyl hydrazine-1,2-dihydroxynaphthalene-3,6-disulfonic acid system

A new method for the determination of trace selenium based on solid substrate-room temperature phosphorimetry (SS-RTP) has been established. This method was based on the fact that in HCl-KCl buffer solution, potassium chlorate could oxidize phenyl hydrazine to form chloridize diazo-ion after being heated at 100 degrees C for 20 min, and then the diazo-ion reacted with 1,2-dihydroxynaphthalene-3,6-disulfonic acid to form red azo-compound which could emit strong room temperature phosphorescence (RTP) signal on filter paper. Selenium could catalyze potassium chlorate oxidizing the reaction between phenyl hydrazine and 1,2-dihydroxynaphthalene-3,6-disulfonic acid, which caused the sharp enhancement of SS-RTP. Under the optimum condition, the relationship between the phosphorescence emission intensity (DeltaIp) and the content of selenium obeyed Beer's law when the concentration of selenium is within the range of 1.60-320 fg spot-1 (or 0.0040-0.80 ng ml-1 with a sample volume of 0.4 microl). The regression equation of working curve can be expressed as DeltaIp=13.12+0.4839CSe(IV) (fg spot-1) (n=6), with correlation coefficient r=0.9991 and a detection limit of 0.28 fg spot-1 (corresponding to a concentration range of 7.0x10(-13) g ml-1 Se(IV), n=11). After 11-fold measurement, R.S.D. were 2.8 and 3.5% for the samples containing 0.0040 and 0.80 ng ml-1 of Se(IV), respectively. This accurate and sensitive method with good repeatability has been successfully applied to the determination of trace selenium in Chinese wolfberry and egg yolk with satisfactory results. The mechanism of the enhancement of phosphorescence was also discussed.

Food chain transfer of selenium in lentic and lotic habitats of a western Canadian watershed

Selenium (Se) is an essential micronutrient, exhibiting a narrow margin between nutritionally optimal and potentially toxic concentrations. Egg-laying vertebrates at the top of aquatic food chains are most at risk in environments with elevated aqueous Se concentrations. The Elk River watershed in British Columbia, Canada receives effluents containing Se from five coal mine operations. This study tested three hypotheses that might account for higher Se concentrations in fish from lentic compared to lotic habitats in the watershed: (1) enhanced uptake by aquatic primary producers, (2) longer food chain length, or (3) greater food web accumulation through sediment-detrital pathways. Stable isotope and Se concentration data demonstrated that Se concentrations in aquatic primary producers and food chain lengths were comparable in lentic and lotic habitats. Enhanced formation of organoselenium and subsequent uptake and cycling via sediment detrital pathways likely account for higher fish tissue Se concentrations in lentic than in lotic areas.

Bioaccumulation of waterborne selenium in the Asiatic clam Corbicula fluminea: influence of feeding-induced ventilatory activity and selenium species

A set of experiments was performed to investigate the bioavailability and the effect of Se on the ventilatory activity of the bivalve Corbicula fluminea, under different conditions of both algal cell densities and dissolved Se chemical forms and concentrations. A first set of experiments was conducted without selenium to investigate the changes in the ventilatory flow rate as a function of the concentration of the unicellular alga Chlamydomonas reinhardtii (10(5)-10(6) cells mL(-1)). For algal concentrations below 2-3x10(5) cells mL(-1), ventilatory activity was highly stimulated whereas it was independent of algal densities for higher values (up to 10(6) cells mL(-1)). To investigate the influence of this first ventilatory drive on selenium contamination process, bivalves were exposed to waterborne selenium at two different algal concentrations, selected to provide contrasting reference ventilatory activities. Three different selenium forms were studied [selenite Se(+IV), selenate Se(+VI) and selenomethionine SeMet] and were added into the water at concentrations of 50 and/or 500 microg L(-1). Each selenium form induced a specific behavioural response, an increase, a decrease or no change of ventilation being observed for Se(+IV), SeMet and Se(+VI), respectively. Selenium accumulation by the organisms was investigated at the organ level for the different exposure conditions. Selenomethionine was the most bioaccumulated form, followed by selenate and selenite, respectively. Despite the bivalves displaying different ventilatory behaviours at low or high algal density, there was no evidence showing reduction or enhancement of Se uptake in the chemical domain investigated.

Inhibition of DNA alkylation damage with inorganic salts

Human exposure to alkylating agents metabolized from tobacco- and food-borne carcinogens occurs regularly. Dietary inorganic compounds such as selenium and vanadium have been shown previously to provide chemoprotective benefits in rat and human trials. Here, we present biochemical data on the ability of inorganic compounds to protect DNA from alkylation damage. An enzyme cleavage assay is used to observe alkylated DNA. Simple salts (e.g., NaCl or NiCl(2)) did not prevent DNA alkylation, whereas anionic oxo species (e.g., Na(2)SeO(4) or Na(3)VO(4)) did inhibit alkylation. We propose that these oxo species behave as nucleophilic targets for the electrophilic alkylating agents, thereby preventing DNA damage.