Packaging of the bacteriophage lambda chromosome: dependence of cos cleavage on chromosome length

Lateral transduction is inherent to the life cycle of the archetypical Salmonella phage P22

Lysogenic induction ends the stable association between a bacteriophage and its host, and the transition to the lytic cycle begins with early prophage excision followed by DNA replication and packaging (ERP). This temporal program is considered universal for P22-like temperate phages, though there is no direct evidence to support the timing and sequence of these events. Here we report that the long-standing ERP program is an observation of the experimentally favored Salmonella phage P22 tsc229 heat-inducible mutant, and that wild-type P22 actually follows the replication-packaging-excision (RPE) program. We find that P22 tsc229 excises early after induction, but P22 delays excision to just before it is detrimental to phage production. This allows P22 to engage in lateral transduction. Thus, at minimal expense to itself, P22 has tuned the timing of excision to balance propagation with lateral transduction, powering the evolution of its host through gene transfer in the interest of self-preservation.

Evolved Populations of Shigella flexneri Phage Sf6 Acquire Large Deletions, Altered Genomic Architecture, and Faster Life Cycles

Genomic architecture is the framework within which genes and regulatory elements evolve and where specific constructs may constrain or potentiate particular adaptations. One such construct is evident in phages that use a headful packaging strategy that results in progeny phage heads packaged with DNA until full rather than encapsidating a simple unit-length genome. Here, we investigate the evolution of the headful packaging phage Sf6 in response to barriers that impede efficient phage adsorption to the host cell. Ten replicate populations evolved faster Sf6 life cycles by parallel mutations found in a phage lysis gene and/or by large, 1.2- to 4.0-kb deletions that remove a mobile genetic IS911 element present in the ancestral phage genome. The fastest life cycles were found in phages that acquired both mutations. No mutations were found in genes encoding phage structural proteins, which were a priori expected from the experimental design that imposed a challenge for phage adsorption by using a Shigella flexneri host lacking receptors preferred by Sf6. We used DNA sequencing, molecular approaches, and physiological experiments on 82 clonal isolates taken from all 10 populations to reveal the genetic basis of the faster Sf6 life cycle. The majority of our isolates acquired deletions in the phage genome. Our results suggest that deletions are adaptive and can influence the duration of the phage life cycle while acting in conjunction with other lysis time-determining point mutations.

DNA Packaging Specificity of Bacteriophage N15 with an Excursion into the Genetics of a Cohesive End Mismatch

During DNA replication by the λ-like bacteriophages, immature concatemeric DNA is produced by rolling circle replication. The concatemers are processed into mature chromosomes with cohesive ends, and packaged into prohead shells, during virion assembly. Cohesive ends are generated by the viral enzyme terminase, which introduces staggered nicks at cos, an approx. 200 bp-long sequence containing subsites cosQ, cosN and cosB. Interactions of cos subsites of immature concatemeric DNA with terminase orchestrate DNA processing and packaging. To initiate DNA packaging, terminase interacts with cosB and nicks cosN. The cohesive ends of N15 DNA differ from those of λ at 2/12 positions. Genetic experiments show that phages with chromosomes containing mismatched cohesive ends are functional. In at least some infections, the cohesive end mismatch persists through cyclization and replication, so that progeny phages of both allelic types are produced in the infected cell. N15 possesses an asymmetric packaging specificity: N15 DNA is not packaged by phages λ or 21, but surprisingly, N15-specific terminase packages λ DNA. Implications for genetic interactions among λ-like bacteriophages are discussed.

Mechanisms of DNA Packaging by Large Double-Stranded DNA Viruses

Translocation of viral double-stranded DNA (dsDNA) into the icosahedral prohead shell is catalyzed by TerL, a motor protein that has ATPase, endonuclease, and translocase activities. TerL, following endonucleolytic cleavage of immature viral DNA concatemer recognized by TerS, assembles into a pentameric ring motor on the prohead's portal vertex and uses ATP hydrolysis energy for DNA translocation. TerL's N-terminal ATPase is connected by a hinge to the C-terminal endonuclease. Inchworm models propose that modest domain motions accompanying ATP hydrolysis are amplified, through changes in electrostatic interactions, into larger movements of the C-terminal domain bound to DNA. In phage ϕ29, four of the five TerL subunits sequentially hydrolyze ATP, each powering translocation of 2.5 bp. After one viral genome is encapsidated, the internal pressure signals termination of packaging and ejection of the motor. Current focus is on the structures of packaging complexes and the dynamics of TerL during DNA packaging, endonuclease regulation, and motor mechanics.

Identification and characterization of a novel Geobacillus thermoglucosidasius bacteriophage, GVE3

The study of extremophilic phages may reveal new phage families as well as different mechanisms of infection, propagation and lysis to those found in phages from temperate environments. We describe a novel siphovirus, GVE3, which infects the thermophile Geobacillus thermoglucosidasius. The genome size is 141,298 bp (G+C 29.6%), making it the largest Geobacillus spp-infecting phage known. GVE3 appears to be most closely related to the recently described Bacillus anthracis phage vB_BanS_Tsamsa, rather than Geobacillus-infecting phages described thus far. Tetranucleotide usage deviation analysis supports this relationship, showing that the GVE3 genome sequence correlates best with B. anthracis and Bacillus cereus genome sequences, rather than Geobacillus spp genome sequences.

Genome gating in tailed bacteriophage capsids

Tailed bacteriophages use a portal system for genome entry and exit from viral capsids. Here, we review the mechanisms how these movements are controlled by the genome gatekeeper that assembles at the portal structure. Phage DNA is packaged at high pressure inside the viral capsid by a powerful motor. The viral genome is translocated through the central channel of the portal protein found at a single vertex of the capsid. Packaging is normally terminated by endonucleolytic cleavage of the substrate DNA followed by disassembly of the packaging motor and closure of the portal system, preventing leakage of the viral genome. This can be achieved either by conformational changes in the portal protein or by sequential addition of proteins that extend the portal channel (adaptors) and physically close it preventing DNA exit (stoppers). The resulting connector structure provides the interface for assembly of short tails (podoviruses) or for attachment of preformed long tails (siphoviruses and myoviruses). The connector maintains the viral DNA correctly positioned for ejection that is triggered by interaction of the phage particle with bacterial receptors. Recent exciting advances are providing new molecular insights on the mechanisms that ensure precise coordination of these critical steps required both for stable viral genome packaging and for its efficient release to initiate infection.

Transcriptional analysis of a Dehalococcoides-containing microbial consortium reveals prophage activation

Chlorinated solvents are among the most prevalent groundwater contaminants in the industrialized world. Biodegradation with Dehalococcoides-containing mixed cultures is an effective remediation technology. To elucidate transcribed genes in a Dehalococcoides-containing mixed culture, a shotgun metagenome microarray was created and used to investigate gene transcription during vinyl chloride (VC) dechlorination and during starvation (no chlorinated compounds) by a microbial enrichment culture called KB-1. In both treatment conditions, methanol was amended as an electron donor. Subsequently, spots were sequenced that contained the genes most differentially transcribed between the VC-degrading and methanol-only conditions, as well as spots with the highest intensities. Sequencing revealed that during VC degradation Dehalococcoides genes involved in transcription, translation, metabolic energy generation, and amino acid and lipid metabolism and transport were overrepresented in the transcripts compared to the average Dehalococcoides genome. KB-1 rdhA14 (vcrA) was the only reductive dehalogenase homologous (RDH) gene with higher transcript levels during VC degradation, while multiple RDH genes had higher transcript levels in the absence of VC. Numerous hypothetical genes from Dehalococcoides also had higher transcript levels in methanol-only treatments, indicating that many uncharacterized proteins are involved in cell maintenance in the absence of chlorinated substrates. In addition, microarray results prompted biological experiments confirming that electron acceptor limiting conditions activated a Dehalococcoides prophage. Transcripts from Spirochaetes, Chloroflexi, Geobacter, and methanogens demonstrate the importance of non-Dehalococcoides organisms to the culture, and sequencing of identified shotgun clones of interest provided information for follow-on targeted studies.

Genome of Bacillus subtilis Bacteriophage SPP1: Structure and Nucleotide Sequence of pac, the Origin of DNA Packaging

The DNA of Bacillus subtilis bacteriophage SPP1 is terminally redundant and partially circularly permuted. To explain these parameters, we followed the Streisinger-Botstein models of phage maturation and assumed that packaging of SPP1 DNA begins at a unique genomic site ("pac") and proceeds sequentially from there. We describe the sequence of about 1,000 nucleotides surrounding pac. This together with size determinations of small, pac-terminated restriction fragments has revealed heterogeneity of the natural pac ends of SPP1 DNA. Such ends fell in each DNA strand into a region of five to seven nucleotides. However, within this range more than 50% of all molecules terminated with defined cytosines on both strands, generating a 3' protruding terminus. The nucleotide sequence of the DNA segment surrounding pac did not reveal any features which would distinguish this region.

Influence of internal capsid pressure on viral infection by phage lambda

Ejection of the genome from the virus, phage lambda, is the initial step in the infection of its host bacterium. In vitro, the ejection depends sensitively on internal pressure within the virus capsid; however, the in vivo effect of internal pressure on infection of bacteria is unknown. Here, we use microfluidics to monitor individual cells and determine the temporal distribution of lysis due to infection as the capsid pressure is varied. The lysis probability decreases markedly with decreased capsid pressure. Of interest, the average lysis times remain the same but the distribution is broadened as the pressure is lowered.

Is phage DNA 'injected' into cells--biologists and physicists can agree

The double-stranded DNA inside bacteriophages is packaged at a density of approximately 500 mg/ml and exerts an osmotic pressure of tens of atmospheres. This pressure is commonly assumed to cause genome ejection during infection. Indeed, by the addition of their natural receptors, some phages can be induced in vitro to completely expel their genome from the virion. However, the osmotic pressure of the bacterial cytoplasm exerts an opposing force, making it impossible for the pressure of packaged DNA to cause complete genome ejection in vivo. Various processes for complete genome ejection are discussed, but we focus on a novel proposal suggesting that the osmotic gradient between the extracellular environment and the cytoplasm results in fluid flow through the phage virion at the initiation of infection. The phage genome is thereby sucked into the cell by hydrodynamic drag.

Efficient DNA packaging of bacteriophage PRD1 requires the unique vertex protein P6

The assembly of bacteriophage PRD1 proceeds via formation of empty procapsids containing an internal lipid membrane, into which the linear double-stranded DNA genome is subsequently packaged. The packaging ATPase P9 and other putative packaging proteins have been shown to be located at a unique vertex of the PRD1 capsid. Here, we describe the isolation and characterization of a suppressor-sensitive PRD1 mutant deficient in the unique vertex protein P6. Protein P6 was found to be an essential part of the PRD1 packaging machinery; its absence leads to greatly reduced packaging efficiency. Lack of P6 was not found to affect particle assembly, because in the P6-deficient mutant infection, wild-type (wt) amounts of particles were produced, although most were empty. P6 was determined not to be a specificity factor, as the few filled particles seen in the P6-deficient infection contained only PRD1-specific DNA. The presence of P6 was not necessary for retention of DNA in the capsid once packaging had occurred, and P6-deficient DNA-containing particles were found to be stable and infectious, albeit not as infectious as wt PRD1 virions. A packaging model for bacteriophage PRD1, based on previous results and those obtained in this study, is presented.

Bacteriophage SPP1 Chu is an alkaline exonuclease in the SynExo family of viral two-component recombinases

Many DNA viruses concatemerize their genomes as a prerequisite to packaging into capsids. Concatemerization arises from either replication or homologous recombination. Replication is already the target of many antiviral drugs, and viral recombinases are an attractive target for drug design, particularly for combination therapy with replication inhibitors, due to their important supporting role in viral growth. To dissect the molecular mechanisms of viral recombination, we and others previously identified a family of viral nucleases that comprise one component of a conserved, two-component viral recombination system. The nuclease component is related to the exonuclease of phage lambda and is common to viruses with linear double-stranded DNA genomes. To test the idea that these viruses have a common strategy for recombination and genome concatemerization, we isolated the previously uncharacterized 34.1 gene from Bacillus subtilis phage SPP1, expressed it in Escherichia coli, purified the protein, and determined its enzymatic properties. Like lambda exonuclease, Chu (the product of 34.1) forms an oligomer, is a processive alkaline exonuclease that digests linear double-stranded DNA in a Mg(2+)-dependent reaction, and shows a preference for 5'-phosphorylated DNA ends. A model for viral recombination, based on the phage lambda Red recombination system, is proposed.

Alterations of the portal protein, gpB, of bacteriophage lambda suppress mutations in cosQ, the site required for termination of DNA packaging

The cosQ site of bacteriophage lambda is required for DNA packaging termination. Previous studies have shown that cosQ mutations can be suppressed in three ways: by a local suppressor within cosQ, an increase in the length of the lambda chromosome, and missense mutations affecting the prohead's portal protein, gpB. In the present work, revertants of a set of lethal cosQ mutants were screened for suppressors. Seven new cosQ suppressors affected gene B, which encodes the portal protein of the prohead. All seven were allele-nonspecific suppressors of cosQ mutations. Experiments with several phages having two cosQ suppressors showed that the suppression effects were additive. Furthermore, these double suppressors had minimal effects on the growth of cosQ(+) phages. These trans-acting suppressors affecting the portal protein are proposed to allow the mutant cosQ site to be more efficiently recognized, due to the slowing of the rate of translocation.

Rapid construction of adenoviral vectors by lambda phage genetics

Continued improvements of adenoviral vectors require the investigation of novel genome configurations. Since adenovirus can be generated directly by transfecting packaging cell lines with viral genomes isolated from plasmid DNA, it is possible to separate genome construction from virus production. In this way failure to generate a virus is not associated with an inability to generate the desired genome. We have developed a novel lambda-based system that allows rapid modification of the viral genome by double homologous recombination in Escherichia coli. The recombination reaction and newly generated genome may reside in a recombination-deficient bacterial host for enhanced plasmid stability. Furthermore, the process is independent of any restriction endonucleases. The strategy relies on four main steps: (i) homologous recombination between an adenovirus cosmid and a donor plasmid (the donor plasmid carries the desired modification[s] and flanking regions of homology to direct its recombination into the viral genome); (ii) in vivo packaging of the recombinant adenoviral cosmids during a productive lambda infection; (iii) transducing a recombination-deficient E. coli lambda lysogen with the generated lysate (the lysogen inhibits the helper phage used to package the recombinant andenoviral cosmid from productively infecting and destroying the host bacteria); (iv) effectively selecting for the desired double-recombinant cosmid. Approximately 10,000 double-recombinant cosmids are recovered per reaction with essentially all of them being the correct double-recombinant molecule. This system was used to generate quickly and efficiently adenoviral genomes deficient in the E1/E3 and E1/E3/E4 regions. The basis of this technology allows any region of the viral genome to be readily modified for investigation of novel configurations.

Production of first generation adenovirus vectors: a review

In the past decade, adenovirus vectors have generated tremendous interest, especially in gene therapy applications. In the so-called 'first generation' adenovirus vectors, the transgenes are inserted in place of the E1 region, or less often the E3 region. Although second-generation and helper-dependent adenovirus vectors will probably prevail in the future in applications that require long-term gene expression, first generation adenovirus vectors will remain very useful in other settings, such as cancer and vaccination, or simply to transfect cell lines that are refractory to other transfection methods. Until a few years ago, the construction of first generation adenovirus vectors was a labor-intensive and time-consuming process. More than 20 methods have appeared that facilitate their construction and are reviewed below.

Termination of packaging of the bacteriophage lambda chromosome: cosQ is required for nicking the bottom strand of cosN

Termination of packaging of the lambda chromosome involves completion of translocation of the DNA into the head shell, and conversion of the translocation complex into a cleavage complex. The cleavage reaction introduces staggered nicks into the downstream cosN to generate the right cohesive end of the chromosome. cosQ, a site adjacent to cosN, was found to be required for nicking the bottom strand of cosN; bottom strand nicking was also sequence-specific for bps at the nick site. Nicking of the top strand of cosN (cosNL) was stimulated by cosQ, but fidelity and efficiency of cosNL nicking were largely dictated by other cos subsites (i.e. cosB and I2). Aberrant top-strand cleavage within cosQ was observed in the absence of I2, and nicking at a site 8 nt 5' to the normal cosNL nick site occurred in the absence of cosB. The presence of cosQ was found to be insufficient to arrest DNA translocation in vivo, indicating that cosQ, per se, is not a packaging stop signal. A model is presented in which the role of cosQ is to depolarize the asymmetric arrangement of terminase protomers in the translocation complex so that protomers are configured to match the 2-fold rotational symmetry of cosN.

Genetic evidence that recognition of cosQ, the signal for termination of phage lambda DNA packaging, depends on the extent of head filling

Packaging a phage lambda chromosome involves cutting the chromosome from a concatemer and translocating the DNA into a prohead. The cutting site, cos, consists of three subsites: cosN, the nicking site; cosB, a site required for packaging initiation; and cosQ a site required for termination of packaging. cosB contains three binding sites (R sequences) for gpNu1, the small subunit of terminase. Because cosQ has sequence identity to the R sequences, it has been proposed that cosQ is also recognized by gpNu1. Suppressors of cosB mutations were unable to suppress a cosQ point mutation. Suppressors of a cosQ mutation (cosQ1) were isolated and found to be of three sorts, the first affecting a base pair in cosQ. The second type of cosQ suppression involved increasing the length of the phage chromosome to a length near to the maximum capacity of the head shell. A third class of suppressors were missense mutations in gene B, which encodes the portal protein of the virion. It is speculated that increasing DNA length and altering the portal protein may reduce the rate of translocation, thereby increasing the efficiency of recognition of the mutant cosQ. None of the cosQ suppressors was able to suppress cosB mutations. Because cosQ and cosB mutations are suppressed by very different types of suppressors, it is concluded that cosQ and the R sequences of cosB are recognized by different DNA-binding determinants.

Expression of the bacteriophage T4 DNA terminase genes 16 and 17 yields multiple proteins

The products of the bacteriophage T4 terminase genes 16 and 17 are known to mediate cutting and packaging of concatemeric vegetative DNA. We show here that the larger of these genes, 17, yields multiple protein species. The complex expression of the T4 terminase genes includes overlapping transcripts, probably initiated from multiple promoters, RNA processing at certain preferred sites and translation initiation from multiple ribosome binding sites (RBS). Translation initiation from these RBS may be modulated by inverted repeat (IR) sequences whose folding can be predicted to differ in different RNA species. In T4 infected bacteria, genes 16 and 17 are probably co-transcribed from several near-consensus late promoters upstream from gene 16, and processed at multiple sites. Additional 5' ends of late transcripts are located downstream from a near-consensus late promoter inside gene 17 and further downstream, unrelated to any known promoter consensus sequence. The gene 17 transcripts that are initiated or cleaved internally contain RBS for shorter open reading frames (ORFs) in the same frame as full-length gene product (gp) 17 of 70 kDa. The truncated proteins, a 59-kDa gp17' and a 45-kDa gp17", are synthesized from cloned gene 17 segments in which the first gene 17 RBS is deleted. Expression of gene 17 is different in BL21(DE3) or W3110[pACT7] host bacteria. The gp17' and gp17" proteins are predicted to contain one or more of the ATPase motifs that are common among large subunits of other phage terminases. They lack a predicted single stranded (ss) DNA binding motif that is unique the large terminase proteins in T4 gp17, and that has been implicated in recognizing ssDNA regions in replicating and recombining T4DNA destined to be packaged. We hypothesize that a truncated gene 17' is an evolutionary precursor of the full-size T4 gene 17. Its function may have been maintained to allow processive packaging from double stranded (ds) DNA ends.

Direct and general selection for lysogens of Escherichia coli by phage lambda recombinant clones

We report a simple in vivo technique for introducing an antibiotic resistance marker into phage lambda. This technique could be used for direct selection of lysogens harboring recombinant phages from the Kohara lambda bank (a collection of ordered lambda clones carrying Escherichia coli DNA segments). The two-step method uses homologous recombination and lambda DNA packaging to replace the nonessential lambda DNA lying between the lysis genes and the right cohesive (cos) end with the neomycin phosphotransferase (npt) gene from Tn903. This occurs during lytic growth of the phage on a plasmid-containing host strain. Neomycin-resistant (npt+) recombinant phages are then selected from the lysates containing the progeny phage by transduction of a polA1 lambda lysogenic host strain to neomycin resistance. We have tested this method with two different Kohara lambda phage clones; in both cases, neomycin resistance cotransduced with the auxotrophic marker carried by the lambda clone, indicating complete genetic linkage. Linkage was verified by restriction mapping of purified DNA from a recombinant phage clone. We also demonstrate that insertion of the npt+ recombinant phages into the lambda prophage can be readily distinguished from insertion into bacterial chromosomal sequences.

Molecular analysis of the packaging signal in bacteriophage CP-T1 of Vibrio cholerae

We have previously identified a unique site, pac, from which packaging of precursor concatameric viral DNA into proheads starts during the maturation process of bacteriophage CP-T1. The direction of this packaging was determined from restriction enzyme cleavage patterns of CP-T1 DNA. A restriction enzyme generated fragment containing pac was cloned and the surrounding DNA region sequenced. Analysis of the nucleotide sequence revealed numerous repeat regions related to the consensus sequence PuagttGAT.AAT.aa.t. Within the sequenced region an open reading frame encoding a 12260 Mr protein was also identified. This protein appears to share homology with the binding domains of known DNA binding proteins and may represent a putative Pac terminase possessing the specific endonuclease activity required for cleavage at the pac site. Minicell analysis of deletion derivatives of the pac-containing clone revealed a protein of approximately 12,900 Mr encoded within this same region, confirming that this Pac protein is phage encoded.

The bacteriophage lambda cohesive end site: isolation of spacing/substitution mutations that result in dependence on Escherichia coli integration host factor

Substitution, insertion and deletion mutations have been constructed at the XmnI restriction site in cos lambda. The XmnI site is located between cosB, the site where terminase binds lambda DNA; and cosN, the site where terminase introduces staggered nicks to generate cohesive ends. Substitution mutations and deletion of a base pair (a -1 change) do not obviously affect lambda growth and DNA packaging. Changes of -2, +2 and -3 render lambda unable to grow on host cells lacking integration host factor (IHF). The -3 mutant has a reduced burst size in IHF+ cells, due to a defect in the initiation of packaging. A -7 deletion mutation is lethal. Models for the basis of these mutational effects are discussed.

Bacteriophage lambda DNA packaging. The product of the FI gene promotes the incorporation of the prohead to the DNA-terminase complex

Lambda DNA packaging in vitro can be examined in stages. In a first step, lambda DNA interacts with terminase to form a DNA-enzyme complex, called complex I. Upon addition of proheads, in a second step, a ternary complex, complex II, containing DNA, terminase and the prohead is formed. Finally, upon addition of the rest of the morphogenetic components, complete phages are assembled. We have investigated the effect of the FI gene product (gpFI) in these reactions and found that a stimulation in phage yield is observed when gpFI is included early in the reaction, at the time when DNA, terminase and proheads interact to form complex II. Measurements of complex II formation revealed that gpFI stimulated the rate of formation of this intermediate. gpFI was further shown to stimulate the addition of proheads to preformed complexes I to give complex II, but the protein did not stimulate complex I formation.

Processive action of terminase during sequential packaging of bacteriophage lambda chromosomes

Bacteriophage lambda chromosomes are packaged in a polarized, sequential fashion from a multimeric DNA substrate. Mature chromosomes are generated when terminase introduces staggered nicks in the cohesive end sites (cos sites) bounding a chromosome. Packaging is polarized, to the initial and terminal cos sites for packaging a chromosome can be defined. To initiate packaging, terminase binds to cos at cosB, and subsequently cuts at cosN. To terminate packaging of a chromosome, a functional cosB is not required at the terminal cos. To explain this finding, it was proposed earlier that terminase scans for the terminal cosN, rather than any subsequent cosB, during packaging. In the work described here we performed helper packaging experiments to see whether processive action of terminase occurs during sequential packaging of lambda chromosomes. The helper packaging experiments involve trilysogens; strains carrying three prophages in tandem. Infection by a hetero-immune helper phage results in packaging of the repressed prophage chromosomes, since the prophage structure is analogous to the normal DNA substrate. Two chromosomes can be packaged from between the three cos sites of the prophages of a trilysogen. Both chromosomes are packaged even when the central cos is cosB-. Our interpretation of these data is that terminase is brought to the central cos by packaging; following cleavage of the central cos, the terminase remains bound to the distal chromosome; and terminase acts to begin packaging of the distal chromosome. The frequency at which terminase reads across the central cos to initiate packaging of the distal chromosome is in the range from 0.3 to 0.5 in our experiments. Reading across cos was found not to be greatly dependent on the state of cosB, indicating that cosB binding is only needed for packaging the first chromosome in a packaging series. A multilysogen was constructed in which the initial cos was cos+ and the distal cos sites were all cosB-. The initial and downstream chromosomes were found to be packaged. This result indicates that terminase that is brought to the central cos by packaging is not only able to initiate packaging of a downstream chromosome, but can also scan and terminate packaging of the downstream chromosome. A model is presented in which processive action of terminase is the basis for sequential packaging of lambda chromosomes.

DNA packaging initiation of Salmonella bacteriophage P22: determination of cut sites within the DNA sequence coding for gene 3

DNA packaging of Salmonella phage P22 starts at a defined site on a concatemer of P22 genomes. The molecular ends formed at the packaging initiation site (pac) map within a region of ca. 120 base pairs and may contain any of the four nucleotides at their 5' end. The determination of the positions of the cuts within the sequence demonstrates a characteristic distribution of cut sites which apparently cannot be attributed to the sequence organization of the involved regions. Symmetric elements of the sequence might serve as signals for a recognition event(s) at pac in a separate process preceding the cutting reaction. The region of packaging initiation is located within the sequence coding for gene 3. The 3 protein is responsible for the site specificity of this process. We find no significant homology to Nu1 protein, which appears to have an analogous or similar function in the DNA maturation of Escherichia coli phage lambda.

A small mobilizable IncP group plasmid vector packageable into bacteriophage lambda capsids in vitro

A mobilizable cosmid derivative of an IncP group plasmid was constructed by cloning the oriT region of RK2, a wide host-range plasmid, and the minimal DNA sequence of bacteriophage lambda required for efficient packaging in vitro. This cosmid is 13 kb in size and has unique restriction sites for EcoRI, XhoI, HindIII, and SalI. The XhoI and HindIII sites are within the kanamycin-resistance gene and the SalI site is in the tetracycline-resistance gene. This plasmid was mobilizable from an Escherichia coli donor to a number of diverse gram-negative bacteria at a frequency of 0.8 to 10 per 100 donors. This vector is one of the smallest of all wide host-range cosmids described in the literature. As part of this study, another mobilizable IncP group plasmid vector has also been constructed which, in addition to the sites listed above, has a unique BglII site, but which lacks the packager sequence.

Lambda phage DNA sequences affecting the packaging process

Our previous work identified a minimal region of bacteriophage lambda DNA that is necessary for packaging into phage particles. It consists of 40 bp of the right arm and 45 bp of the left arm [Miwa and Matsubara, Gene 20 (1982)267-279]. A part of this region, 22 bp of the right arm and 38 bp of the left arm, is sufficient for cutting at cos lambda (the minimal sequence for cos lambda cutting). An 84-bp region to its right contains a binding site for lambda terminase, a complex of Nu1 and A gene products. This second region, which we called the enhancing region for packaging, stimulates cutting at cos lambda as well as packaging. This region is not active if it is physically separated from the minimal packaging region. The enhancing region has 15-bp inverted repeats. These sequences are conserved in the corresponding region of bacteriophage phi 80, which has the same packaging specificity as lambda.

Formation of oligomeric structures from plasmid DNA carrying cos lambda that is packaged into bacteriophage lambda heads

Plasmids that carry cos lambda, the region necessary for lambda phage packaging and that are as small as four kilobases in size can be packaged into lambda phage heads in head-to-tail tandem oligomeric structures. Multimeric oligomers as large as undecamers have been detected. Oligomer formation depends upon the products of red and gam of lambda, and the general recombination occurs between different plasmids that share homologous DNA regions. The packaging efficiency of plasmids depends on its copy number in cells and its genome size. Upon injection into a cell, the DNA establishes itself as a plasmid in a tandem structure. When such a plasmid in a high oligomeric structure is used as the source of packaging DNA, the packaging efficiency of the plasmids is elevated. The oligomers are stable in recA cells, whereas they drift toward lower oligomers in recA+ cells.

Identification of sequences necessary for packaging DNA into lambda phage heads

Several species of DNA molecules are packaged into lambda phage heads if they carry the region around the cohesive end site of lambda phage (cos lambda). The minimal functional sequence around cos lambda needed for packaging was examined by cloning in pBR322. The results showed that the minimal region contained 85 bp around cos lambda; 45 bp of the left arm of lambda phage and 40 bp of the right arm. A 75-bp region located to the right of the minimal region seems to enhance packaging. A 223-bp fragment containing these regions can be used as a portable element for plasmid DNA packaging into lambda phage heads. Plasmid ppBest 322, a derivative of pBR322 carrying this portable packager and both amp and tet genes, was constructed. This plasmid is useful for cloning of large DNA fragments.