Stabilization of functional proteins by introduction of multiple disulfide bonds

Creation of Cross-Linked Crystals With Intermolecular Disulfide Bonds Connecting Symmetry-Related Molecules Allows Retention of Tertiary Structure in Different Solvent Conditions

Protein crystals are generally fragile and sensitive to subtle changes such as pH, ionic strength, and/or temperature in their crystallization mother liquor. Here, using T4 phage lysozyme as a model protein, the three-dimensional rigidification of protein crystals was conducted by introducing disulfide cross-links between neighboring molecules in the crystal. The effect of cross-linking on the stability of the crystals was evaluated by microscopic observation and X-ray diffraction. When soaking the obtained cross-linked crystals into a precipitant-free solution, the crystals held their shape without dissolution and diffracted to approximately 1.1 Å resolution, comparable to that of the non-cross-linked crystals. Such cross-linked crystals maintained their diffraction even when immersed in other solutions with pH values from 4 to 10, indicating that the disulfide cross-linking made the packing contacts enforced and resulted in some mechanical strength in response to changes in the preservation conditions. Furthermore, the cross-linked crystals gained stability to permit soaking into solutions containing high concentrations of organic solvents. The results suggest the possibility of obtaining protein crystals for effective drug screening by introducing appropriate cross-linked disulfide bonds.

Characterization of a thermostable phytase from Bacillus licheniformis WHU and further stabilization of the enzyme through disulfide bond engineering

Phytases are important industrial enzymes widely used as feed additives to hydrolyze phytate and release inorganic phosphate. In this study, a phytase gene PhyBL isolated from Bacillus licheniformis WHU was cloned and expressed in Escherichia coli. PhyBL showed the highest activity at pH 7.0 and retained more than 40 % of its activity at a wide temperature range from 35 to 65 °C. Ca²⁺ significantly affected the stability and activity of the enzyme. We further improved the stability of PhyBL through extensively disulfide engineering. After constructing and screening a series of variants, an enhanced stable G197C/A358C variant was obtained. The G197C/A358C variant had a half-life at 60℃ roughly 3.8-fold longer than the wild type. In addition, the G197C/A358C variant also showed enhanced proteolytic resistance to pepsin and trypsin. The potential mechanism underlying these improvements was investigated by molecular dynamics analysis. Our results suggest that the G197C/A358C variant may have potential application as an additive enzyme in aquaculture feed.

Global Protein Stabilization Does Not Suffice to Prevent Amyloid Fibril Formation

Mutations or cellular conditions that destabilize the native protein conformation promote the population of partially unfolded conformations, which in many cases assemble into insoluble amyloid fibrils, a process associated with multiple human pathologies. Therefore, stabilization of protein structures is seen as an efficient way to prevent misfolding and subsequent aggregation. This has been suggested to be the underlying reason why proteins living in harsh environments, such as the extracellular space, have evolved disulfide bonds. The effect of protein disulfides on the thermodynamics and kinetics of folding has been extensively studied, but much less is known on its effect on aggregation reactions. Here, we designed a single point mutation that introduces a disulfide bond in the all-α FF domain, a protein that, despite being devoid of preformed β-sheets, forms β-sheet-rich amyloid fibrils. The novel and unique covalent bond in the FF domain dramatically increases its thermodynamic stability and folding speed. Nevertheless, these optimized properties cannot counteract the inherent aggregation propensity of the protein, thus indicating that a high global protein stabilization does not suffice to prevent amyloid formation unless it contributes to hide from exposure the specific regions that nucleate the aggregation reaction.

High yield production of fungal manganese peroxidases by E. coli through soluble expression, and examination of the activities

Oxidative enzymes of white-rot fungi play a key role in lignin biodegradation. Among those fungus, Ceriporiopsis subvermispora degrades lignin before cellulose in wood; C. subvermispora is the only fungus that secretes all known types of manganese peroxidases (CsMnPs). Utilization of lignin-degrading peroxidases has been limited so far due to the lack of efficient preparation methods and intensive characterization. In this study, we developed a highly efficient method to prepare active CsMnPs through soluble expression by E. coli, which had long been impossible. The genes of MnPs selected from each subfamily were codon-optimized and expressed under the control of a cold shock promoter. A proper level of heme incorporation was achieved by continuous addition of hemin during cultivation. As much as 3 mg of purified MnPs was obtained from 100 mL culture, which is an about 20-fold higher yield than that from inclusion bodies through refolding. Further improvement of the solubility on the expression was achieved by combinatorial coexpression of chaperones. All obtained MnPs had heme-to-protein ratios as high as those of native MnPs. They were all active below pH 5. Our method is applicable to other fungal-secreted enzymes should help the progress of their basic characterization and application for better utilization of woody biomass.

Effect of an Imposed Contact on Secondary Structure in the Denatured State of Yeast Iso-1-cytochrome c

There is considerable evidence that long-range interactions stabilize residual protein structure under denaturing conditions. However, evaluation of the effect of a specific contact on structure in the denatured state has been difficult. Iso-1-cytochrome c variants with a Lys54 → His mutation form a particularly stable His-heme loop in the denatured state, suggestive of loop-induced residual structure. We have used multidimensional nuclear magnetic resonance methods to assign ¹H and ¹⁵N backbone amide and ¹³C backbone and side chain chemical shifts in the denatured state of iso-1-cytochrome c carrying the Lys54 → His mutation in 3 and 6 M guanidine hydrochloride and at both pH 6.4, where the His54-heme loop is formed, and pH 3.6, where the His54-heme loop is broken. Using the secondary structure propensity score, with the 6 M guanidine hydrochloride chemical shift data as a random coil reference state for data collected in 3 M guanidine hydrochloride, we found residual helical structure in the denatured state for the 60s helix and the C-terminal helix, but not in the N-terminal helix in the presence or absence of the His54-heme loop. Non-native helical structure is observed in two regions that form Ω-loops in the native state. There is more residual helical structure in the C-terminal helix at pH 6.4 when the loop is formed. Loop formation also appears to stabilize helical structure near His54, consistent with induction of helical structure observed when His-heme bonds form in heme-peptide model systems. The results are discussed in the context of the folding mechanism of cytochrome c.

Multifactorial level of extremostability of proteins: can they be exploited for protein engineering?

Research on extremostable proteins has seen immense growth in the past decade owing to their industrial importance. Basic research of attributes related to extreme-stability requires further exploration. Modern mechanistic approaches to engineer such proteins in vitro will have more impact in industrial biotechnology economy. Developing a priori knowledge about the mechanism behind extreme-stability will nurture better understanding of pathways leading to protein molecular evolution and folding. This review is a vivid compilation about all classes of extremostable proteins and the attributes that lead to myriad of adaptations divulged after an extensive study of 6495 articles belonging to extremostable proteins. Along with detailing on the rationale behind extreme-stability of proteins, emphasis has been put on modern approaches that have been utilized to render proteins extremostable by protein engineering. It was understood that each protein shows different approaches to extreme-stability governed by minute differences in their biophysical properties and the milieu in which they exist. Any general rule has not yet been drawn regarding adaptive mechanisms in extreme environments. This review was further instrumental to understand the drawback of the available 14 stabilizing mutation prediction algorithms. Thus, this review lays the foundation to further explore the biophysical pleiotropy of extreme-stable proteins to deduce a global prediction model for predicting the effect of mutations on protein stability.

Calcium Binding and Disulfide Bonds Regulate the Stability of Secretagogin towards Thermal and Urea Denaturation

Secretagogin is a calcium-sensor protein with six EF-hands. It is widely expressed in neurons and neuro-endocrine cells of a broad range of vertebrates including mammals, fishes and amphibia. The protein plays a role in secretion and interacts with several vesicle-associated proteins. In this work, we have studied the contribution of calcium binding and disulfide-bond formation to the stability of the secretagogin structure towards thermal and urea denaturation. SDS-PAGE analysis of secretagogin in reducing and non-reducing conditions identified a tendency of the protein to form dimers in a redox-dependent manner. The denaturation of apo and Calcium-loaded secretagogin was studied by circular dichroism and fluorescence spectroscopy under conditions favoring monomer or dimer or a 1:1 monomer: dimer ratio. This analysis reveals significantly higher stability towards urea denaturation of Calcium-loaded secretagogin compared to the apo protein. The secondary and tertiary structure of the Calcium-loaded form is not completely denatured in the presence of 10 M urea. Reduced and Calcium-loaded secretagogin is found to refold reversibly after heating to 95°C, while both oxidized and reduced apo secretagogin is irreversibly denatured at this temperature. Thus, calcium binding greatly stabilizes the structure of secretagogin towards chemical and heat denaturation.

Changing the topology of protein backbone: the effect of backbone cyclization on the structure and dynamics of a SH3 domain

Understanding of the effects of the backbone cyclization on the structure and dynamics of a protein is essential for using protein topology engineering to alter protein stability and function. Here we have determined, for the first time, the structure and dynamics of the linear and various circular constructs of the N-SH3 domain from protein c-Crk. These constructs differ in the length and amino acid composition of the cyclization region. The backbone cyclization was carried out using intein-mediated intramolecular chemical ligation between the juxtaposed N- and the C-termini. The structure and backbone dynamics studies were performed using solution NMR. Our data suggest that the backbone cyclization has little effect on the overall three-dimensional structure of the SH3 domain: besides the termini, only minor structural changes were found in the proximity of the cyclization region. In contrast to the structure, backbone dynamics are significantly affected by the cyclization. On the subnanosecond time scale, the backbone of all circular constructs on average appears more rigid than that of the linear SH3 domain; this effect is observed over the entire backbone and is not limited to the cyclization site. The backbone mobility of the circular constructs becomes less restricted with increasing length of the circularization loop. In addition, significant conformational exchange motions (on the sub-millisecond time scale) were found in the N-Src loop and in the adjacent β-strands in all circular constructs studied in this work. These effects of backbone cyclization on protein dynamics have potential implications for the stability of the protein fold and for ligand binding.

Impact of physiochemical properties on pharmacokinetics of protein therapeutics

Physicochemical properties, such as molecular weight, size, partition coefficient, acid dissociation constant and solubility have a great impact on pharmacokinetics of traditional small molecule drugs and substantially used in development of small drugs. However, predicting pharmacokinetic fate (absorption, distribution, metabolism and elimination) of protein therapeutics from their physicochemical parameters is extremely difficult due to the macromolecular nature of therapeutic proteins and peptides. Their structural complexity and immunogenicity are other contributing factors that determine their biological fate. Therefore, to develop generalized strategies concerning development of therapeutic proteins and peptides are highly challenging. However, reviewing the literature, authors found that physiochemical properties, such as molecular weight, charge and structural modification are having great impact on pharmacokinetics of protein therapeutics and an attempt is made to provide the major findings in this manuscript. This manuscript will serve to provide some bases for developing protein therapeutics with desired pharmacokinetic profile.

Conformational analysis by quantitative NOE measurements of the β-proton pairs across individual disulfide bonds in proteins

NOEs between the β-protons of cysteine residues across disulfide bonds in proteins provide direct information on the connectivities and conformations of these important cross-links, which are otherwise difficult to investigate. With conventional [U-(13)C, (15)N]-proteins, however, fast spin diffusion processes mediated by strong dipolar interactions between geminal β-protons prohibit the quantitative measurements and thus the analyses of long-range NOEs across disulfide bonds. We describe a robust approach for alleviating such difficulties, by using proteins selectively labeled with an equimolar mixture of (2R, 3S)-[β-(13)C; α,β-(2)H(2)] Cys and (2R, 3R)-[β-(13)C; α,β-(2)H(2)] Cys, but otherwise fully deuterated. Since either one of the prochiral methylene protons, namely β2 (proS) or β3 (proR), is always replaced with a deuteron and no other protons remain in proteins prepared by this labeling scheme, all four of the expected NOEs for the β-protons across disulfide bonds could be measured without any spin diffusion interference, even with long mixing times. Therefore, the NOEs for the β2 and β3 pairs across each of the disulfide bonds could be observed at high sensitivity, even though they are 25% of the theoretical maximum for each pair. With the NOE information, the disulfide bond connectivities can be unambiguously established for proteins with multiple disulfide bonds. In addition, the conformations around disulfide bonds, namely χ(2) and χ(3), can be determined based on the precise proton distances of the four β-proton pairs, by quantitative measurements of the NOEs across the disulfide bonds. The feasibility of this method is demonstrated for bovine pancreatic trypsin inhibitor, which has three disulfide bonds.

Introduction of a disulfide bond leads to stabilization and crystallization of a ricin immunogen

RTA1-33/44-198 is a catalytically inactive, single-domain derivative of the ricin toxin A-chain (RTA) engineered to serve as a stable protein scaffold for presentation of native immunogenic epitopes (Olson et al., Protein Eng Des Sel 2004;17:391-397). To improve the stability and solubility of RTA1-33/44-198 further, we have undertaken the design challenge of introducing a disulfide (SS) bond. Nine pairs of residues were selected for placement of the SS-bond based on molecular dynamics simulation studies of the modeled single-domain chain. Disulfide formation at either of two positions (R48C/T77C or V49C/E99C) involving a specific surface loop (44-55) increased the protein melting temperature by ~5°C compared with RTA1-33/44-198 and by ~13°C compared with RTA. Prolonged stability studies of the R48C/T77C variant (> 60 days at 37°C, pH 7.4) confirmed a > 40% reduction in self-aggregation compared with RTA1-33/44-198 lacking the SS-bond. The R48C/T77C variant retained affinity for anti-RTA antibodies capable of neutralizing ricin toxin, including a monoclonal that recognizes a human B-cell epitope. Introduction of either R48C/T77C or V49C/E99C promoted crystallization of RTA1-33/44-198, and the X-ray structures of the variants were solved to 2.3 A or 2.1 A resolution, respectively. The structures confirm formation of an intramolecular SS-bond, and reveal a single-domain fold that is significantly reduced in volume compared with RTA. Loop 44 to 55 is partly disordered as predicted by simulations, and is positioned to form self-self interactions between symmetry-related molecules. We discuss the importance of RTA loop 34 to 55 as a nucleus for unfolding and aggregation, and draw conclusions for ongoing structure-based minimalist design of RTA-based immunogens.

Effective approach for calculations of absolute stability of proteins using focused dielectric constants

The ability to predict the absolute stability of proteins based on their corresponding sequence and structure is a problem of great fundamental and practical importance. In this work, we report an extensive, refinement and validation of our recent approach (Roca et al., FEBS Lett 2007;581:2065-2071) for predicting absolute values of protein stability DeltaG(fold). This approach employs the semimacroscopic protein dipole Langevin dipole method in its linear response approximation version (PDLD/S-LRA) while using the best fitted values of the dielectric constants epsilon'(p) and epsilon'(eff) for the self energy and charge-charge interactions, respectively. The method is validated on a diverse set of 45 proteins. It is found that the best fitted values of both dielectric constants are around 40. However, the self energy of internal residues and the charge-charge interactions of Lys have to be treated with care, using a somewhat lower values of epsilon'(p) and epsilon'(eff). The predictions of DeltaG(fold) reported here, have an average error of only 1.8 kcal/mole compared to the observed values, making our method very promising for estimating protein stability. It also provides valuable insight into the complex electrostatic phenomena taking place in folded proteins.

Protein engineering of the quaternary sulfiredoxin.peroxiredoxin enzyme.substrate complex reveals the molecular basis for cysteine sulfinic acid phosphorylation

Oxidative stress can damage the active site cysteine of the antioxidant enzyme peroxiredoxin (Prx) to the sulfinic acid form, Prx-SO(2)(-). This modification leads to inactivation. Sulfiredoxin (Srx) utilizes a unique ATP-Mg(2+)-dependent mechanism to repair the Prx molecule. Using selective protein engineering that involves disulfide bond formation and site-directed mutagenesis, a mimic of the enzyme.substrate complex has been trapped. Here, we present the 2.1 A crystal structure of human Srx in complex with PrxI, ATP, and Mg(2+). The Cys(52) sulfinic acid moiety was substituted by mutating this residue to Asp, leading to a replacement of the sulfur atom with a carbon atom. Because the Srx reaction cannot occur, the structural changes in the Prx active site that lead to the attack on ATP may be visualized. The local unfolding of the helix containing C52D resulted in the packing of Phe(50) in PrxI within a hydrophobic pocket of Srx. Importantly, this structural rearrangement positioned one of the oxygen atoms of Asp(52) within 4.3 A of the gamma-phosphate of ATP bound to Srx. These observations support a mechanism where phosphorylation of Prx-SO(2)(-) is the first chemical step.

Metal uptake by manganese superoxide dismutase

Manganese superoxide dismutase is an important antioxidant defense metalloenzyme that protects cells from damage by the toxic oxygen metabolite, superoxide free radical, formed as an unavoidable by-product of aerobic metabolism. Many years of research have gone into understanding how the metal cofactor interacts with small molecules in its catalytic role. In contrast, very little is presently known about how the protein acquires its metal cofactor, an important step in the maturation of the protein and one that is absolutely required for its biological function. Recent work is beginning to provide insight into the mechanisms of metal delivery to manganese superoxide dismutase in vivo and in vitro.

Experimental characterization of the denatured state ensemble of proteins

The traditional view of the denatured state ensemble of proteins is that it behaves as a classic random coil. This model has important implications for the analysis of protein stability, protein folding, and cooperativity; namely that the effects of mutations on the free energy of the denatured state ensemble can be ignored. This assumption, which is still routinely made, at least at the implicit level, greatly simplifies the analysis of such experiments. However it has long been recognized that the denatured state ensemble (DSE) of real proteins is often quite different from a random coil and can exhibit significant structural preferences. In some cases parts of the chain can even adopt relatively well-defined conformations, particularly under native conditions. Well-studied examples of DSE interactions include elements of hydrogen-bonded secondary structure, particularly helices or turns, as well hydrophobic clusters, hydrophobic aromatic clusters, and more recently interactions involving charged residues. Deviations from random-coil behavior are of practical importance if they influence protein folding, stability, or function, or if they compromise our analysis and interpretation of experiments. The existence of residual structure in the DSE naturally leads to the question of its role in protein folding and stability, and raises the possibility that some mutations could exert a significant part of their effect by altering the DSE. Much of our understanding of the interactions governing protein stability and the folding process have been generated by mutational studies; thus, a detailed understanding of the denatured state ensemble is critical.

Analysis on conservation of disulphide bonds and their structural features in homologous protein domain families

Background

Disulphide bridges are well known to play key roles in stability, folding and functions of proteins. Introduction or deletion of disulphides by site-directed mutagenesis have produced varying effects on stability and folding depending upon the protein and location of disulphide in the 3-D structure. Given the lack of complete understanding it is worthwhile to learn from an analysis of extent of conservation of disulphides in homologous proteins. We have also addressed the question of what structural interactions replaces a disulphide in a homologue in another homologue.

Results

Using a dataset involving 34,752 pairwise comparisons of homologous protein domains corresponding to 300 protein domain families of known 3-D structures, we provide a comprehensive analysis of extent of conservation of disulphide bridges and their structural features. We report that only 54% of all the disulphide bonds compared between the homologous pairs are conserved, even if, a small fraction of the non-conserved disulphides do include cytoplasmic proteins. Also, only about one fourth of the distinct disulphides are conserved in all the members in protein families. We note that while conservation of disulphide is common in many families, disulphide bond mutations are quite prevalent. Interestingly, we note that there is no clear relationship between sequence identity between two homologous proteins and disulphide bond conservation. Our analysis on structural features at the sites where cysteines forming disulphide in one homologue are replaced by non-Cys residues show that the elimination of a disulphide in a homologue need not always result in stabilizing interactions between equivalent residues.

Conclusion

We observe that in the homologous proteins, disulphide bonds are conserved only to a modest extent. Very interestingly, we note that extent of conservation of disulphide in homologous proteins is unrelated to the overall sequence identity between homologues. The non-conserved disulphides are often associated with variable structural features that were recruited to be associated with differentiation or specialisation of protein function.

Conformationally gated metal uptake by apomanganese superoxide dismutase

Metal uptake by apomanganese superoxide dismutase in vitro is a complex process exhibiting multiphase "gated" reaction kinetics and a striking sigmoidal temperature profile that has led to a model of conformationally gated metal binding, requiring conversion between "closed" and "open" forms. This work systematically explores the structural determinants of metal binding in both wild-type (WT) apoprotein and mutational variants as a test of mechanistic models. The pH dependence of metalation under physiological conditions (37 degrees C) shows it is linked to ionization of a single proton with a p K a of 7.7. Size exclusion chromatography demonstrates that the apoprotein is dimeric even when it is fully converted to the open form. The role of molecular motions in metal binding has been probed by using disulfide engineering to introduce covalent constraints into the protein. While restricting motion at domain interfaces has no effect, constraining the subunit interface significantly perturbs metal uptake but does not prevent the process. Mutagenesis of residues in the active site environment results in a dramatic shift in the transition temperature by as much as 20 degrees C or a loss of pH sensitivity. On the basis of these results, a mechanism for metal uptake by manganese superoxide dismutase involving reorientation of active site residues to form a metal entry channel is proposed.

Electrostatic interactions in the denatured state ensemble: their effect upon protein folding and protein stability

It is now recognized that the denatured state ensemble (DSE) of proteins can contain significant amounts of structure, particularly under native conditions. Well-studied examples include small units of hydrogen bonded secondary structure, particularly helices or turns as well as hydrophobic clusters. Other types of interactions are less well characterized and it has often been assumed that electrostatic interactions play at most a minor role in the DSE. However, recent studies have shown that both favorable and unfavorable electrostatic interactions can be formed in the DSE. These can include surprisingly specific non-native interactions that can even persist in the transition state for protein folding. DSE electrostatic interactions can be energetically significant and their modulation either by mutation or by varying solution conditions can have a major impact upon protein stability. pH dependent stability studies have shown that electrostatic interactions can contribute up to 4 kcal mol(-1) to the stability of the DSE.

Insights into the structural variation between pentapeptide repeat proteins--crystal structure of Rfr23 from Cyanothece 51142

Cyanothece sp. PCC 51142 contains 35 pentapeptide repeat proteins (PRPs), proteins that contain a minimum of eight tandem repeated five-residues (Rfr) of the general consensus sequence A[N/D]LXX. Published crystal structures of PRPs show that the tandem pentapeptide repeats adopt a type of right-handed quadrilateral beta-helix called an Rfr-fold. To characterize how structural features of Rfr-folds might vary with different amino acid sequences, the crystal structure of Cyanothece Rfr23 (174 residues) was determined at 2.4A resolution. The structure is dominated by an Rfr-fold capped at the N-terminus with a nine-residue alpha-helix (M26(*)-E34). The Rfr-fold of Rfr23 contains four structural features previously unobserved in Rfr-folds. First, Rfr23 is composed entirely of type II beta-turns. Second, the pentapeptide repeats are not consecutive in the primary amino acid sequence. Instead, Rfr23 contains 24-residues protruding outside one corner of the first complete N-terminal coil of the Rfr-fold (L56-P79) (24-residue insertion). Third, a disulfide bond between C39 and C42 bridges the beta-turn between the first and second pentapeptide repeats in the first coil (disulfide bracket). NMR spectroscopy indicates that the reduction of the disulfide bracket with the addition of DTT destroys the entire Rfr-fold. Fourth, a single-residue perturbs the Rfr-fold slightly in the last coil between the C-terminal two pentapeptide repeats (single-residue bulge).

Engineered disulfide bonds increase active-site local stability and reduce catalytic activity of a cold-adapted alkaline phosphatase

Alkaline phosphatase is an extracellular enzyme that is membrane-bound in eukaryotes but resides in the periplasmic space of bacteria. It normally carries four cysteine residues that form two disulfide bonds, for instance in the APs of Escherichia coli and vertebrates. An AP variant from a Vibrio sp. has only one cysteine residue. This cysteine is second next to the nucleophilic serine in the active site. We have individually modified seven residues to cysteine that are on two loops predicted to be within a 5 A radius. Four of them formed a disulfide bond to the endogenous cysteine. Thermal stability was monitored by circular dichroism and activity measurements. Global stability was similar to the wild-type enzyme. However, a significant increase in heat-stability was observed for the disulfide-containing variants using activity as a measure, together with a large reduction in catalytic rates (k(cat)) and a general decrease in Km values. The results suggest that a high degree of mobility near the active site and in the helix carrying the endogenous cysteine is essential for full catalytic efficiency in the cold-adapted AP.

Stabilization of Hyperactive Dihydrofolate Reductase by Cyanocysteine-mediated Backbone Cyclization

Stabilization of an enzyme while maintaining its activity has been a major challenge in protein chemistry. Although it is difficult to simultaneously improve stability and activity of a protein by amino acid substitutions due to the activity-stability trade-off, backbone cyclization by connecting the N and C termini with a linker is promising as a general method of stabilizing a protein without affecting its activity. Recently, we created a hyperactive, methionine- and cysteine-free mutant of dihydrofolate reductase from Escherichia coli, called ANLYF, by introducing seven amino acid substitutions, which, however, destabilized the protein. Here we show that ANLYF is stabilized without a loss of its high activity by a novel backbone cyclization method for unprotected proteins. The method is based on the in vitro cyanocysteine-mediated intramolecular ligation reaction, which can be conducted with relatively high efficiency by a simple procedure and under mild conditions. We also show that the reversibility of thermal denaturation is highly improved by the cyclization. Thus, activity and stability of the protein can be separately improved by amino acid substitutions and backbone cyclization, respectively. We suggest that the cyanocysteine-mediated cyclization method is complementary to the intein-mediated cyclization method in stabilizing a protein without affecting its activity.

Thermodynamics of protein denatured states

Recent work on the thermodynamics of protein denatured states is providing insight into the stability of residual structure and the conformational constraints that affect the disordered states of proteins. Current data from native state hydrogen exchange and the pH dependence of protein stability indicate that residual structure can modulate the stability of the denatured state by up to 4 kcal mol(-1). NMR structural data have emphasized the role of hydrophobic clusters in stabilizing denatured state residual structures, however recent results indicate that electrostatic interactions, both favorable and unfavorable, are also important modulators of the stability of the denatured state. Thermodynamics methods that take advantage of histidine-heme ligation chemistry have also been developed to probe the conformational constraints that act on denatured states. These methods have provided insights into the role of excluded volume, chain stiffness, and loop persistence in modulating the conformational preferences of highly disordered proteins. New insights into protein folding and novel methods to manipulate protein stability are emerging from this work.

Mechanism of stabilization of Bacillus circulans xylanase upon the introduction of disulfide bonds

The introduction of disulfide bonds has been used as a strategy to enhance the stability of Bacillus circulans xylanase. The transition temperature of the S100C/N148C (DS1), V98C/A152C (DS2), and A1GC/G187,C188 (cXl) in comparison to the wild type was increased by 5.0, 4.1 and 3.8 degrees C, respectively. Interestingly, a combination of two disulfide bonds of DS1 and cXl (cDS1, circular disulfide 1) led to a 12 degrees C increase in the transition temperature. Importantly, an increase in the melting point and DeltaDeltaG values of the cDS1 mutant was cooperative. These results suggest that the mechanism of stabilization by disulfide bonds under irreversible denaturation condition is achieved through: (1) a change in the rate-limiting step on the denaturation pathway; (2) destabilizing the unfolded state without affecting the relative rate constants on the denaturation pathway (like cXl mutant); and (3) or combination of the two (cDS1 mutant).

Intramolecular disulphide bond arrangements in nonhomologous proteins

The presence and location of intramolecular disulphide bonds are a key determinant of the structure and function of proteins. Intramolecular disulphide bonds in proteins have previously been analyzed under the assumption that there is no clear relationship between disulphide arrangement and disulphide concentration. To investigate this, a set of sequence nonhomologous protein chains containing one or more intramolecular disulphide bonds was extracted from the Protein Data Bank, and the arrangements of the bonds, Protein Data Bank header, and Structural Characterization of Proteins fold were analyzed as a function of intramolecular disulphide bond concentration. Two populations of intramolecular disulphide bond-containing proteins were identified, with a naturally occurring partition at 25 residues per bond. These populations were named intramolecular disulphide bond-rich and -poor. Benefits of partitioning were illustrated by three results: (1) rich chains most frequently contained three disulphides, explaining the plateaux in extant disulphide frequency distributions; (2) a positive relationship between median chain length and the number of disulphides, only seen when the data were partitioned; and (3) the most common bonding pattern for chains with three disulphide bonds was based on the most common for two, only when the data were partitioned. The two populations had different headers, folds, bond arrangements, and chain lengths. Associations between IDSB concentration, IDSB bonding pattern, loop sizes, SCOP fold, and PDB header were also found. From this, we found that intramolecular disulphide bond-rich and -poor proteins follow different bonding rules, and must be considered separately to generate meaningful models of bond formation.

A Small-Molecule-Based Approach to Sense Codon-Templated Natural-Unnatural Hybrid Peptides. Selective Silencing and Reassignment of the Sense Codon by Orthogonal Reacylation Stalling at the Single-Codon Level

In the presence of the stable sulfamoyl analogue of phenylalanyl adenylate (Phe-SA), the UUU/UUC sense codon for phenylalanine (Phe) can be silenced and reassigned to a naphthylalanine (Nap) conjugated to tRNAPhe. We have demonstrated the efficiency and selectivity or orthogonality of the Phe-to-Nap reassignment induced by an "orthogonal reacylation stalling" strategy at the single-codon level in the translation of mRNAs of dihydrofolate reductase and a 24-mer oligopeptide. We used a prokaryotic translation system with an essential preincubation, during which the endogenous precharged phenylalanyl-tRNAPhe undergoes deacylation and the reacylation of the resulting tRNAPhe is stalled by the action of Phe-SA to inhibit the phenylalanyl-tRNA synthetase activity. We discuss the significance of the present small-molecule-based approach to sense-codon templated natural-unnatural peptides.

Design, folding, and activities of metal-assembled coiled coil proteins

Metal ions serve many purposes in natural proteins, from the stabilization of tertiary structure to the direction of protein folding to crucial roles in electron transfer and catalysis. There is considerable interest in creating metal binding sites in designed proteins to understand the structural role of metal ions and to design new metalloproteins with useful functions. The de novo design of metalloproteins and the role of metals in the folding of designed proteins are reviewed here, with particular focus on the design, folding, and activities of the [M(bpy-peptide)(3)](2+) structure. This maquette is constructed by the covalent attachment of 2,2'-bipyridine to the N-termini of amphiphilic peptides, and it is assembled into a folded trimeric coiled coil by the addition of a six-coordinate transition metal ion and the resulting hydrophobic collapse of the peptides. The [M(bpy-peptide)(3)](2+) structure has been employed in diverse applications, ranging from electron transfer pathway studies to the study of optimal hydrophobic packing in a virtual library to the construction of receptors and biosensors.

Caged Phosphoproteins

We present the chemical and biological synthesis of caged phosphoproteins using the in vitro nonsense codon suppression methodology. Specifically, phosphoamino acid analogues of serine, threonine, and tyrosine with a single photocleavable o-nitrophenylethyl caging group were synthesized as the amino acyl tRNA adducts for insertion into full-length proteins. For this purpose, a novel phosphitylating agent was developed. The successful incorporation of these bulky and charged amino acids into the alpha-subunit of the nicotinic acetyl choline receptor (nAChR) and the vasodilator-stimulated phosphoprotein (VASP) using an in vitro translation system is reported.

Cooperativity of the oxidization of cysteines in globular proteins

Based on the 639 non-homologous proteins with 2910 cysteine-containing segments of well-resolved three-dimensional structures, a novel approach has been proposed to predict the disulfide-bonding state of cysteines in proteins by constructing a two-stage classifier combining a first global linear discriminator based on their amino acid composition and a second local support vector machine classifier. The overall prediction accuracy of this hybrid classifier for the disulfide-bonding state of cysteines in proteins has scored 84.1% and 80.1%, when measured on cysteine and protein basis using the rigorous jack-knife procedure, respectively. It shows that whether cysteines should form disulfide bonds depends not only on the global structural features of proteins but also on the local sequence environment of proteins. The result demonstrates the applicability of this novel method and provides comparable prediction performance compared with existing methods for the prediction of the oxidation states of cysteines in proteins.

Reformable intramolecular cross-linking of the N-terminal domain of heparin cofactor II

The crystal structure of a heparin cofactor II (HCII)-thrombin Michaelis complex has revealed extensive contacts encompassing the N-terminal domain of HCII and exosite I of the proteinase. In contrast, the location of the N-terminal extension in the uncomplexed inhibitor was unclear. Using a disulfide cross-linking strategy, we demonstrate that at least three different sites (positions 52, 54 and 68) within the N terminus may be tethered in a reformable manner to position 195 in the loop region between helix D and strand s2A of the HCII molecule, suggesting that the N-terminal domain may interact with the inhibitor scaffold in a permissive manner. Cross-linking of the N terminus to the HCII body does not strongly affect the inhibition of alpha-chymotrypsin, indicating that the reactive site loop sequences of the engineered inhibitor variants, required for interaction with one of the HCII target enzymes, are normally accessible. In contrast, intramolecular tethering of the N-terminal extension results in a drastic decrease of alpha-thrombin inhibitory activity, both in the presence and in the absence of glycosaminoglycans. Treatment with dithiothreitol and iodoacetamide restores activity towards alpha-thrombin, suggesting that release of the N terminus of HCII is an important component of the multistep interaction between the inhibitor and alpha-thrombin.

Prediction of the disulfide-bonding state of cysteines in proteins based on dipeptide composition

In this paper, a novel approach has been introduced to predict the disulfide-bonding state of cysteines in proteins by means of a linear discriminator based on their dipeptide composition. The prediction is performed with a newly enlarged dataset with 8114 cysteine-containing segments extracted from 1856 non-homologous proteins of well-resolved three-dimensional structures. The oxidation of cysteines exhibits obvious cooperativity: almost all cysteines in disulfide-bond-containing proteins are in the oxidized form. This cooperativity can be well described by protein's dipeptide composition, based on which the prediction accuracy of the oxidation form of cysteines scores as high as 89.1% and 85.2%, when measured on cysteine and protein basis using the rigorous jack-knife procedure, respectively. The result demonstrates the applicability of this new relatively simple method and provides superior prediction performance compared with existing methods for the prediction of the oxidation states of cysteines in proteins.

Design and Synthesis of Photochemically Controllable Restriction EndonucleaseBamHI by Manipulating the Salt-Bridge Network in the Dimer Interface

The strategy for the design of photochemically controllable enzymes by manipulating the dimer interface is described. Employing a restriction endonuclease BamHI, the selective incorporation of amino acids having a photoremovable 6-nitroveratryl group into the specific position (Lys132) in the dimer interface of the BamHI mutant (H133A) was performed. The activity of the photofunctionalized BamHI mutant was significantly suppressed, and the following photoirradiation induced the recovery of the activity. In addition, uncaging of the 6-nitroveratryl group introduced to Lys132 did not seriously reduce the catalytic activity and affinity for the substrate. These results indicate that the activity of the enzyme can be effectively regulated by caging and uncaging of the specific amino acid in the dimer interface using the photoremovable group.

An Intersubunit Disulfide Bond Prevents in Vitro Aggregation of a Superoxide Dismutase-1 Mutant Linked to Familial Amytrophic Lateral Sclerosis

Familial amyotrophic lateral sclerosis (FALS) is linked to over 90 point mutations in superoxide dismutase-1 (SOD1), a dimeric metalloenzyme. The postmortem FALS brain is characterized by SOD1 inclusions in the motor neurons of regions in which neuronal loss is most significant. These findings, together with animal modeling studies, suggest that aggregation of mutant SOD1 produces a pathogenic species. We demonstrate here that a mutant form of SOD1 (A4V) that is linked to a particularly aggressive form of FALS aggregates in vitro, while wild-type SOD1 (WT) is stable. Some A4V aggregates resemble amyloid pores formed by other disease-associated proteins. The WT dimer is significantly more stable than the A4V dimer, suggesting that dimer dissociation may be the required first step of aggregation. To test this hypothesis, an intersubunit disulfide bond between symmetry-related residues at the A4V dimer interface was introduced. The resultant disulfide bond (V148C-V148C') eliminated the concentration-dependent loss of enzymatic activity of A4V, stabilized the A4V dimer, and completely abolished aggregation. A drug-like molecule that could stabilize the A4V dimer could slow the onset and progression of FALS.

Effects of the difference in the unfolded-state ensemble on the folding of Escherichia coli dihydrofolate reductase

The unfolded state of a protein is an ensemble of a large number of conformations ranging from fully extended to compact structures. To investigate the effects of the difference in the unfolded-state ensemble on protein folding, we have studied the structure, stability, and folding of "circular" dihydrofolate reductase (DHFR) from Escherichia coli in which the N and C-terminal regions are cross-linked by a disulfide bond, and compared the results with those of disulfide-reduced "linear" DHFR. Equilibrium studies by circular dichroism, difference absorption spectra, solution X-ray scattering, and size-exclusion chromatography show that whereas the native structures of both proteins are essentially the same, the unfolded state of circular DHFR adopts more compact conformations than the unfolded state of the linear form, even with the absence of secondary structure. Circular DHFR is more stable than linear DHFR, which may be due to the decrease in the conformational entropy of the unfolded state as a result of circularization. Kinetic refolding measurements by stopped-flow circular dichroism and fluorescence show that under the native conditions both proteins accumulate a burst-phase intermediate having the same structures and both fold by the same complex folding mechanism with the same folding rates. Thus, the effects of the difference in the unfolded state of circular and linear DHFRs on the refolding reaction are not observed after the formation of the intermediate. This suggests that for the proteins with close termini in the native structure, early compaction of a protein molecule to form a specific folding intermediate with the N and C-terminal regions in close proximity is a crucial event in folding. If there is an enhancement in the folding reflecting the reduction in the breadth of the unfolded-state ensemble for circular DHFR, this acceleration must occur in the sub-millisecond time-range.

MODIP revisited: re-evaluation and refinement of an automated procedure for modeling of disulfide bonds in proteins

There have been several attempts to stabilize proteins through the introduction of engineered disulfide bonds. For reasons that are currently unclear, these have met with mixed success. Hence identification of locations where introduction of a disulfide cross-link will lead to protein stabilization is still a challenging task. A computational procedure, MODIP, was introduced more than a decade ago to select sites in protein structures that have the correct geometry for disulfide formation when replaced by Cys. In this study, we re-evaluated the stereochemical criteria used by MODIP for the selection and gradation of sites for modeling disulfides. We introduced steric criteria to check for energetically unfavorable non-bonded contacts with the modeled disulfide, since these can considerably offset the stabilizing effect of the cross-link. The performance of the refined procedure was checked for its ability to correctly predict naturally occurring disulfide bonds in proteins. A set of proteins in which disulfide bonds were introduced experimentally were analyzed with respect to MODIP predictions, stability and other parameters such as accessibility, residue depth, B-factors of the mutated sites, change in volume upon mutation and loop length enclosed by the disulfide. The analysis suggests that in addition to proper stereochemistry, stabilizing disulfides occur in regions of low depth, relatively high mobility, have a loop length greater than 25 and where the disulfide typically occupies a volume less than or equal to that of the original residues.

A perturbed pK(a) at the binding site of the nicotinic acetylcholine receptor: implications for nicotine binding

A series of tethered quaternary ammonium derivatives of Tyr have been incorporated into the binding site of the nicotinic acetylcholine receptor (nAChR) using the in vivo nonsense suppression method, producing constitutively active (self-gating) receptors. We have incorporated primary, secondary, and tertiary amine tethered agonists to give receptors whose constitutive activity can be modulated by pH. Lowering the pH protonates the tethered amine, giving it a positive charge and allowing it to reversibly activate the receptor. Tertiary and secondary tethered amines, TyrO3T and TyrO3S, have been successfully incorporated at alpha149 in the nAChR. Constitutive currents at pH 5.5 are 6 times those at pH 9.0. The pKa of TyrO3T in the binding site appears to be 6 or lower, differing substantially from its pKa in solution ( approximately 9.3). This local pKa perturbation has substantial implications for pharmacological research on the nAChR: of the tertiary agonists considered, noracetylcholine experiences this pKa perturbation, while nicotine does not.

In vitro selection of mRNA display libraries containing an unnatural amino acid

The incorporation of unnatural amino acid into selectable, amplifiable peptide and protein libraries expands the chemical diversity of such libraries, thus considerably facilitating the process of obtaining ligands with improved properties (affinity, specificity, and function), particularly against therapeutically interesting targets. Here, we report that biocytin, a biotin derivative of lysine, can be inserted into an mRNA-protein fusion molecule through amber stop codon suppression. We also demonstrate that templates containing the codon corresponding to the biocytin tRNA (a UAG stop codon) can be enriched by iterative cycles of selection against a streptavidin agarose matrix.

Conformational stability of dimeric and monomeric forms of the C-terminal domain of human immunodeficiency virus-1 capsid protein

The unfolding equilibrium of the C-terminal domain of human immunodeficiency virus-1 (HIV-1) capsid protein has been analyzed by circular dichroism and fluorescence spectroscopy. The results for the dimeric, natural domain are consistent with a three-state model (N(2)<-->2I<-->2U). The dimer (N(2)) dissociates and partially unfolds in a coupled cooperative process, into a monomeric intermediate (I) of very low conformational stability. This intermediate, which is the only significantly populated form at low (1 microM) protein concentrations, fully preserves the secondary structure but has lost part of the tertiary (intramonomer) interactions found in the dimer. In a second transition, the intermediate cooperatively unfolds into denatured monomer (U). The latter process is the equivalent of a two-state unfolding transition observed for a monomeric domain in which Trp184 at the dimer interface had been truncated to Ala. A highly conserved, disulfide-bonded cysteine, but not the disulfide bond itself, and three conserved residues within the major homology region of the retroviral capsid are important for the conformational stability of the monomer. All these residues are involved also in the association process, despite being located far away from the dimerization interface. It is proposed that dimerization of the C-terminal domain of the HIV-1 capsid protein involves induced-fit recognition, and the conformational reorganization also improves substantially the low intrinsic stability of each monomeric half.

Rescuing a destabilized protein fold through backbone cyclization

We describe the physicochemical characterization of various circular and linear forms of the approximately 60 residue N-terminal Src homology 3 (SH3) domain from the murine c-Crk adapter protein. Structural, dynamic, thermodynamic, kinetic and biochemical studies reveal that backbone circularization does not prevent the adoption of the natural folded structure in any of the circular proteins. Both the folding and unfolding rate of the protein increased slightly upon circularization. Circularization did not lead to a significant thermodynamic stabilization of the full-length protein, suggesting that destabilizing enthalpic effects (e.g. strain) negate the expected favorable entropic contribution to overall stability. In contrast, we find circularization results in a dramatic stabilization of a truncated version of the SH3 domain lacking a key glutamate residue. The ability to rescue the destabilized mutant indicates that circularization may be a useful tool in protein engineering programs geared towards generating minimized proteins.

Disulfide bond effects on protein stability: designed variants of Cucurbita maxima trypsin inhibitor-V

Attempts to increase protein stability by insertion of novel disulfide bonds have not always been successful. According to the two current models, cross-links enhance stability mainly through denatured state effects. We have investigated the effects of removal and addition of disulfide cross-links, protein flexibility in the vicinity of a cross-link, and disulfide loop size on the stability of Cucurbita maxima trypsin inhibitor-V (CMTI-V; 7 kD) by differential scanning calorimetry. CMTI-V offers the advantage of a large, flexible, and solvent-exposed loop not involved in extensive intra-molecular interactions. We have uncovered a negative correlation between retention time in hydrophobic column chromatography, a measure of protein hydrophobicity, and melting temperature (T(m)), an indicator of native state stabilization, for CMTI-V and its variants. In conjunction with the complete set of thermodynamic parameters of denaturation, this has led to the following deductions: (1) In the less stable, disulfide-removed C3S/C48S (Delta Delta G(d)(50 degrees C) = -4 kcal/mole; Delta T(m) = -22 degrees C), the native state is destabilized more than the denatured state; this also applies to the less-stable CMTI-V* (Delta Delta G(d)(50 degrees C) = -3 kcal/mole; Delta T(m) = -11 degrees C), in which the disulfide-containing loop is opened by specific hydrolysis of the Lys(44)-Asp(45) peptide bond; (2) In the less stable, disulfide-inserted E38C/W54C (Delta Delta G(d)(50 degrees C) = -1 kcal/mole; Delta T(m) = +2 degrees C), the denatured state is more stabilized than the native state; and (3) In the more stable, disulfide-engineered V42C/R52C (Delta Delta G(d)(50 degrees C) = +1 kcal/mole; Delta T(m) = +17 degrees C), the native state is more stabilized than the denatured state. These results show that a cross-link stabilizes both native and denatured states, and differential stabilization of the two states causes either loss or gain in protein stability. Removal of hydrogen bonds in the same flexible region of CMTI-V resulted in less destabilization despite larger changes in the enthalpy and entropy of denaturation. The effect of a cross-link on the denatured state of CMTI-V was estimated directly by means of a four-state thermodynamic cycle consisting of native and denatured states of CMTI-V and CMTI-V*. Overall, the results show that an enthalpy-entropy compensation accompanies disulfide bond effects and protein stabilization is profoundly modulated by altered hydrophobicity of both native and denatured states, altered flexibility near the cross-link, and residual structure in the denatured state.

Modulating protein folding rates in vivo and in vitro by side-chain interactions between the parallel beta strands of green fluorescent protein

We have identified pairs of residues across the two parallel beta strands of green fluorescent protein that facilitate native strand register of the surface-exposed beta barrel. After constructing a suitable host environment around two guest residues, minimizing interactions of the guest residues with surrounding side-chains yet maintaining the wild-type protein structure and the chromophore environment, we introduced a library of cross-strand pairings by cassette mutagenesis. Colonies of Escherichia coli transformed with the library differ in intracellular fluorescence. Most of the fluorescent pairs have predominantly charged and polar guest site residues. The magnitude and the rate of fluorescence acquisition in vivo from transformed E. coli cells varies among the mutants despite comparable levels of protein expression. Spectroscopic measurements of purified mutants show that the native protein structure is maintained. Kinetic studies using purified protein with fully matured chromophores demonstrate that the mutants span a 10-fold range in folding rates with undetectable differences in unfolding rates. Thus, green fluorescent protein provides an ideal system for monitoring determinants of in vivo protein folding. Cross-strand pairings affect both protein stability and folding kinetics by favoring the formation of native strand register preferentially to non-native strand alignments.