The structure of crystalline bacterial surface layers

An Immunomodulator-Boosted Lactococcus Lactis Platform For Enhanced In Situ Tumor Vaccine

In situ vaccination is an attractive type of cancer immunotherapy, and methods of persistently dispersing immune agonists throughout the entire tumor are crucial for maximizing their therapeutic efficacy. Based on the probiotics usually used for dietary supplements, an immunomodulator-boosted Lactococcus lactis (IBL) strategy is developed to enhance the effectiveness of in situ vaccination with the immunomodulators. The intratumoral delivery of OX40 agonist and resiquimod-modified Lactococcus lactis (OR@Lac) facilitates local retention and persistent dispersion of immunomodulators, and dramatically modulates the key components of anti-tumor immune response. This novel vaccine activated dendritic cells and cytotoxic T lymphocytes in the tumor and tumor-draining lymph nodes, and ultimately significantly inhibited tumor growth and prolonged the survival rate of tumor-bearing mice. The combination of OR@Lac and ibrutinib, a myeloid-derived suppressor cell inhibitor, significantly alleviated or even completely inhibited tumor growth in tumor-bearing mice. In conclusion, IBL is a promising in situ tumor vaccine approach for clinical application and provides an inspiration for the delivery of other drugs.

Aptamer-assisted tumor localization of bacteria for enhanced biotherapy

Despite bacterial-mediated biotherapies have been widely explored for treating different types of cancer, their implementation has been restricted by low treatment efficacy, due largely to the absence of tumor-specific accumulation following administration. Here, the conjugation of aptamers to bacterial surface is described by a simple and cytocompatible amidation procedure, which can significantly promote the localization of bacteria in tumor site after systemic administration. The surface density of aptamers can be easily adjusted by varying feed ratio and the conjugation is able to increase the stability of anchored aptamers. Optimal bacteria conjugated with an average of 2.8 × 105 aptamers per cell present the highest specificity to tumor cells in vitro, separately generating near 2- and 4-times higher accumulation in tumor tissue at 12 and 60 hours compared to unmodified bacteria. In both 4T1 and H22 tumor-bearing mouse models, aptamer-conjugated attenuated Salmonella show enhanced antitumor efficacy, along with highly activated immune responses inside the tumor. This work demonstrates how bacterial behaviors can be tuned by surface conjugation and supports the potential of aptamer-conjugated bacteria for both targeted intratumoral localization and enhanced tumor biotherapy.

Patterns in Nature—S-Layer Lattices of Bacterial and Archaeal Cells

Bacterial surface layers (S-layers) have been observed as the outermost cell envelope component in a wide range of bacteria and most archaea. S-layers are monomolecular lattices composed of a single protein or glycoprotein species and have either oblique, square or hexagonal lattice symmetry with unit cell dimensions ranging from 3 to 30 nm. They are generally 5 to 10 nm thick (up to 70 nm in archaea) and represent highly porous protein lattices (30–70% porosity) with pores of uniform size and morphology in the range of 2 to 8 nm. Since S-layers can be considered as one of the simplest protein lattices found in nature and the constituent units are probably the most abundantly expressed proteins on earth, it seems justified to briefly review the different S-layer lattice types, the need for lattice imperfections and the discussion of S-layers from the perspective of an isoporous protein network in the ultrafiltration region. Finally, basic research on S-layers laid the foundation for applications in biotechnology, synthetic biology, and biomimetics.

Description of two regular structures associated to the cell envelope of Thermus thermophilus: a structural transformation?

Thermus thermophilus HB8 is a Gram-negative thermophilic eubacteria, with a well-defined outer membrane and a thin peptidoglycan layer around the cytoplasmic membrane. There is a S-layer on the cell envelope, whose main component is a protein of Mr around 100.000, masked by a lipopolysaccharide-like outer surface that can be revealed by freeze-fracture and shadowing of the native surface of the cells of T. thermophilus.

When membrane fractions of this bacteria are treated with Triton X-100 in presence of EDTA, two-dimensional crystals with a hexagonal ordering could be observed by negative staining (figures 1a, 1b). This structure, called S1, had an unit cell dimensions a = b = 20 nm. Nevertheless, if the treatment is developed without the quelant agent, a structure with p2 symmetry is observed, S2, (figures 1d, 1e) with a = 24 and b = 21 nm. We have characterized both crystals by electron microscopy and two-dimensional analysis by Fourier methods. The resulting images showed very different characteristics; while the p6 structure is a typical S-layer, fig. 1c, the other one is a porin-like or regular outer membrane protein structure, fig. 1f, (2).This is surprising because both fractions contains the same ˝P100˝ protein (revealed by biochemical analysis).

Colorimetric As (V) detection based on S-layer functionalized gold nanoparticles

Herein, we present simple and rapid colorimetric and UV/VIS spectroscopic methods for detecting anionic arsenic (V) complexes in aqueous media. The methods exploit the aggregation of S-layer-functionalized spherical gold nanoparticles of sizes between 20 and 50 nm in the presence of arsenic species. The gold nanoparticles were functionalized with oligomers of the S-layer protein of Lysinibacillus sphaericus JG-A12. The aggregation of the nanoparticles results in a color change from burgundy-red for widely dispersed nanoparticles to blue for aggregated nanoparticles. A detailed signal analysis was achieved by measuring the shift of the particle plasmon resonance signal with UV/VIS spectroscopy. To further improve signal sensitivity, the influence of larger nanoparticles was tested. In the case of 50 nm gold nanoparticles, a concentration of the anionic arsenic (V) complex lower than 24 ppb was detectable.

Characterization of a nanoscale S-layer protein based template for biomolecular patterning

Well organized template for biomolecular conjugation is the foundation for biosensing. Most of the current devices are fabricated using lithographic patterning processes and self-assembly monolayer (SAM) methods. However, the research toward developing a sub-10 nm patterned, self-regenerated template on various types of substrates is limited, mainly due to the limited functional groups of the building material. Bacterial surface layer proteins (S-layer proteins) can self-assemble into ordered lattice with regular pore sizes of 2-8 nm on different material supports and interfaces. The ordered structure can regenerate after extreme variations of solvent conditions. In this work, we developed a nanoscale biomolecular template based on S-layer proteins on gold surface for fabrication of sensing layer in biosensors. S-layer proteins were isolated from Bacillus cereus, Lysinibacillus sphaericus and Geobacillus stearothermophilus. Protein concentrations were measured by Bradford assay. The protein purities were verified by SDS-PAGE, showing molecular weights ranging from 97-135 kDa. The hydrophilicity of the substrate surface was measured after surface treatments of protein recrystallization. Atomic force microscopic (AFM) measurement was performed on substrate surface, indicating a successful immobilization of a monolayer of S-layer protein with 8-9 nm height on gold surface. The template can be applied on various material supports and acts as a self-regenerated sensing layer of biosensors in the future.

S-layers: principles and applications

Monomolecular arrays of protein or glycoprotein subunits forming surface layers (S-layers) are one of the most commonly observed prokaryotic cell envelope components. S-layers are generally the most abundantly expressed proteins, have been observed in species of nearly every taxonomical group of walled bacteria, and represent an almost universal feature of archaeal envelopes. The isoporous lattices completely covering the cell surface provide organisms with various selection advantages including functioning as protective coats, molecular sieves and ion traps, as structures involved in surface recognition and cell adhesion, and as antifouling layers. S-layers are also identified to contribute to virulence when present as a structural component of pathogens. In Archaea, most of which possess S-layers as exclusive wall component, they are involved in determining cell shape and cell division. Studies on structure, chemistry, genetics, assembly, function, and evolutionary relationship of S-layers revealed considerable application potential in (nano)biotechnology, biomimetics, biomedicine, and synthetic biology.

Reassembly of S-layer proteins

Crystalline bacterial cell surface layers (S-layers) represent the outermost cell envelope component in a broad range of bacteria and archaea. They are monomolecular arrays composed of a single protein or glycoprotein species and represent the simplest biological membranes developed during evolution. They are highly porous protein mesh works with unit cell sizes in the range of 3 to 30 nm, and pore sizes of 2 to 8 nm. S-layers are usually 5 to 20 nm thick (in archaea, up to 70 nm). S-layer proteins are one of the most abundant biopolymers on earth. One of their key features, and the focus of this review, is the intrinsic capability of isolated native and recombinant S-layer proteins to form self-assembled mono- or double layers in suspension, at solid supports, the air-water interface, planar lipid films, liposomes, nanocapsules, and nanoparticles. The reassembly is entropy-driven and a fascinating example of matrix assembly following a multistage, non-classical pathway in which the process of S-layer protein folding is directly linked with assembly into extended clusters. Moreover, basic research on the structure, synthesis, genetics, assembly, and function of S-layer proteins laid the foundation for their application in novel approaches in biotechnology, biomimetics, synthetic biology, and nanotechnology.

S-layer protein self-assembly

Crystalline S(urface)-layers are the most commonly observed cell surface structures in prokaryotic organisms (bacteria and archaea). S-layers are highly porous protein meshworks with unit cell sizes in the range of 3 to 30 nm, and thicknesses of ~10 nm. One of the key features of S-layer proteins is their intrinsic capability to form self-assembled mono- or double layers in solution, and at interfaces. Basic research on S-layer proteins laid foundation to make use of the unique self-assembly properties of native and, in particular, genetically functionalized S-layer protein lattices, in a broad range of applications in the life and non-life sciences. This contribution briefly summarizes the knowledge about structure, genetics, chemistry, morphogenesis, and function of S-layer proteins and pays particular attention to the self-assembly in solution, and at differently functionalized solid supports.

Novel protein a affinity matrix prepared from two-dimensional protein crystals

In this article, we describe a novel type of affinity matrix which was prepared by covalently binding Protein A to crystalline cell surface layers (S-layers) from the gram-positive Clostridium thermohydrosulfuricum L111-69. S-layers were used in the form of cell wall fragments, which were obtained by breaking whole cells by ultrasonification and removing the cell content and the plasma membrane. In these thimble shaped structures, revealing a size of 1 to 2 mum, the peptidoglycan-containing layer was covered on both faces with a hexagonally ordered S-layer lattice composed of identical glycoprotein subunits. After crosslinking the S-layer protein with glutaraldehyde, carboxyl groups from acidic amino acids were activated with carbodiimide and used for immobilization of Protein A. Quantitative determination confirmed that up to two Protein A molecules were bound per S-layer subunit leading to a dense monomolecular coverage of the immobilization matrix with the ligand.Affinity microparticles were capable of adsorbing lgG from solutions of purified preparations, from artificial lgG-albumin mixtures, and from serum. The amount of lgG bound to affinity microparticles corresponded to the theoretical saturation capacity. Under appropriate conditions, up to 95% of the adsorbed lgG could be eluted again. Affinity microparticles were found to have an extremely low Protein A leakage and a high stability toward mechanical forces. Because pores in the S-layer lattice revealed a size of 4 to 5 nm, immobilization of Protein A and adsorption of lgG was restricted to the outermost surface area. This excludes mass transfer problems usually encountered with affinity matrices prepared from amorphous polymers where more than 90% of the ligands are immobilized in the interior. (c) 1994 John Wiley & Sons, Inc.

Nanobiotechnology with S-layer proteins as building blocks

One of the key challenges in nanobiotechnology is the utilization of self- assembly systems, wherein molecules spontaneously associate into reproducible aggregates and supramolecular structures. In this contribution, we describe the basic principles of crystalline bacterial surface layers (S-layers) and their use as patterning elements. The broad application potential of S-layers in nanobiotechnology is based on the specific intrinsic features of the monomolecular arrays composed of identical protein or glycoprotein subunits. Most important, physicochemical properties and functional groups on the protein lattice are arranged in well-defined positions and orientations. Many applications of S-layers depend on the capability of isolated subunits to recrystallize into monomolecular arrays in suspension or on suitable surfaces (e.g., polymers, metals, silicon wafers) or interfaces (e.g., lipid films, liposomes, emulsomes). S-layers also represent a unique structural basis and patterning element for generating more complex supramolecular structures involving all major classes of biological molecules (e.g., proteins, lipids, glycans, nucleic acids, or combinations of these). Thus, S-layers fulfill key requirements as building blocks for the production of new supramolecular materials and nanoscale devices as required in molecular nanotechnology, nanobiotechnology, biomimetics, and synthetic biology.

S-layer stabilized lipid membranes (Review)

The present review focuses on a unique bio-molecular construction kit based on surface-layer (S-layer) proteins as building blocks and patterning elements, but also major classes of biological molecules such as lipids, membrane-active peptides and membrane proteins, and glycans for the design of functional supported lipid membranes. The biomimetic approach copying the supramolecular building principle of most archaeal cell envelopes merely composed of a plasma membrane and a closely associated S-layer lattice has resulted in robust and fluid lipid membranes. Most importantly, S-layer supported lipid membranes spanning an aperture or generated on solid and porous substrates constitute highly interesting model membranes for the reconstitution of responsive transmembrane proteins and membrane-active peptides. This is of particular challenge as one-third of all proteins are membrane proteins such as pore-forming proteins, ion channels, and receptors. S-layer supported lipid membranes are seen as one of the most innovative strategies in membrane protein-based nanobiotechnology with potential applications that range from pharmaceutical (high-throughput) drug screening over lipid chips to the detection of biological warfare agents.

Structural analysis and evidence for dynamic emergence of Bacillus anthracis S-layer networks

Surface layers (S-layers), which form the outermost layers of many Bacteria and Archaea, consist of protein molecules arranged in two-dimensional crystalline arrays. Bacillus anthracis, a gram-positive, spore-forming bacterium, responsible for anthrax, synthesizes two abundant surface proteins: Sap and EA1. Regulatory studies showed that EA1 and Sap appear sequentially at the surface of the parental strain. Sap and EA1 can form arrays. The structural parameters of S-layers from mutant strains (EA1(-) and Sap(-)) were determined by computer image processing of electron micrographs of negatively stained regular S-layer fragments or deflated whole bacteria. Sap and EA1 projection maps were calculated on a p1 symmetry basis. The unit cell parameters of EA1 were a = 69 A, b = 83 A, and gamma = 106 degrees, while those of Sap were a = 184 A, b = 81 A, and gamma = 84 degrees. Freeze-etching experiments and the analysis of the peripheral regions of the cell suggested that the two S-layers have different settings. We characterized the settings of each network at different growth phases. Our data indicated that the scattered emergence of EA1 destabilizes the Sap S-layer.

S-layer-supported lipid membranes

Many prokaryotic organisms (archaea and bacteria) are covered by a regularly ordered surface layer (S-layer) as the outermost cell wall component. S-layers are built up of a single protein or glycoprotein species and represent the simplest biological membrane developed during evolution. Pores in S-layers are of regular size and morphology, and functional groups on the protein lattice are aligned in well-defined positions and orientations. Due to the high degree of structural regularity S-layers represent unique systems for studying the structure, morphogenesis, and function of layered supramolecular assemblies. Isolated S-layer subunits of numerous organisms are able to assemble into monomolecular arrays either in suspension, at air/water interfaces, on planar mono- and bilayer lipid films, on liposomes and on solid supports (e.g. silicon wafers). Detailed studies on composite S-layer/lipid structures have been performed with Langmuir films, freestanding bilayer lipid membranes, solid supported lipid membranes, and liposomes. Lipid molecules in planar films and liposomes interact via their head groups with defined domains on the S-layer lattice. Electrostatic interactions are the most prevalent forces. The hydrophobic chains of the lipid monolayers are almost unaffected by the attachment of the S-layer and no impact on the hydrophobic thickness of the membranes has been observed. Upon crystallization of a coherent S-layer lattice on planar and vesicular lipid membranes, an increase in molecular order is observed, which is reflected in a decrease of the membrane tension and an enhanced mobility of probe molecules within an S-layer-supported bilayer. Thus, the terminology 'semifluid membrane' has been introduced for describing S-layer-supported lipid membranes. The most important feature of composite S-layer/lipid membranes is an enhanced stability in comparison to unsupported membranes.

Bacterial S-layer protein coupling to lipids: x-ray reflectivity and grazing incidence diffraction studies

The coupling of bacterial surface (S)-layer proteins to lipid membranes is studied in molecular detail for proteins from Bacillus sphaericus CCM2177 and B. coagulans E38-66 recrystallized at dipalmitoylphosphatidylethanolamine (DPPE) monolayers on aqueous buffer. A comparison of the monolayer structure before and after protein recrystallization shows minimal reorganization of the lipid chains. By contrast, the lipid headgroups show major rearrangements. For the B. sphaericus CCM2177 protein underneath DPPE monolayers, x-ray reflectivity data suggest that amino acid side chains intercalate the lipid headgroups at least to the phosphate moieties, and probably further beyond. The number of electrons in the headgroup region increases by more than four per lipid. Analysis of the changes of the deduced electron density profiles in terms of a molecular interpretation shows that the phosphatidylethanolamine headgroups must reorient toward the surface normal to accommodate such changes. In terms of the protein structure (which is as yet unknown in three dimensions), the electron density profile reveals a thickness lz approximately 90 A of the recrystallized S-layer and shows water-filled cavities near its center. The protein volume fraction reaches maxima of >60% in two horizontal sections of the S-layer, close to the lipid monolayer and close to the free subphase. In between it drops to approximately 20%. Four S-layer protein monomers are located within the unit cell of a square lattice with a spacing of approximately 131 A.

Purification and characterization of Campylobacter rectus surface layer proteins

Campylobacter rectus is a putative periodontopathogen which expresses a proteinaceous surface layer (S-layer) external to the outer membrane. S-layers are considered to play a protective role for the microorganism in hostile environments. The S-layer proteins from six different C. rectus strains (five human isolates and a nonhuman primate [NHP] isolate) were isolated, purified, and characterized. The S-layer proteins of these strains varied in molecular mass (ca. 150 to 166 kDa) as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. They all reacted with monospecific rabbit antiserum to the purified S-layer of C. rectus 314, but a quantitative enzyme-linked immunosorbent assay demonstrated a strong antigenic relationship among the five human strains, while the NHP strain, 6250, showed weaker reactivity. Amino acid composition analysis showed that the S-layers of four C. rectus strains contained large proportions of acidic amino acids (13 to 27%) and that >34% of the amino acid residues were hydrophobic. Amino acid sequence analysis of six S-layer proteins revealed that the first 15 amino-terminal amino acids were identical and showed seven residues of identity with the amino-terminal sequence of the Campylobacter fetus S-layer protein SapA1. CNBr peptide profiles of the S-layer proteins from C. rectus 314, ATCC 33238, and 6250 confirmed that the S-layer proteins from the human strains were similar to each other and somewhat different from that of the NHP isolate (strain 6250). However, the S-layer proteins from the two human isolates do show some structural heterogeneity. For example, there was a 17-kDa fragment unique to the C. rectus 314 S-layer. The amino-terminal sequence of this peptide had homology with the C. rectus 51-kDa porin and was composed of nearly 50% hydrophobic residues. Thus, the S-layer protein from C. rectus has structural heterogeneity among different human strains and immunoheterogeneity with the NHP strain.

Linker mutagenesis of the Caulobacter crescentus S-layer protein: toward a definition of an N-terminal anchoring region and a C-terminal secretion signal and the potential for heterologous protein secretion

Linker insertion mutagenesis was used to modify the paracrystalline surface layer (S-layer) protein (RsaA) of the gram-negative bacterium Caulobacter crescentus. Eleven unique BamHI linker insertions in the cloned rsaA gene were identified; at the protein level, these linker insertions introduced 4 to 6 amino acids at positions ranging from the extreme N terminus to the extreme C terminus of the 1,026-amino-acid RsaA protein. All linker-peptide insertions in the RsaA N terminus caused the secreted protein to be shed into the growth medium, suggesting that the RsaA N terminus is involved in cell surface anchoring. One linker-peptide insertion in the RsaA C terminus (amino acid 784) had no effect on S-layer biogenesis, while another (amino acid 907) disrupted secretion of the protein, suggesting that RsaA possesses a secretion signal lying C terminal to amino acid 784, near or including amino acid 907. Unlike extreme N- or C-terminal linker-peptide insertions, those more centrally located in the RsaA primary sequence had no apparent effect on S-layer biogenesis. By using a newly introduced linker-encoded restriction site, a 3' fragment of the rsaA gene encoding the last 242 C-terminal amino acids of the S-layer protein was expressed in C. crescentus from heterologous Escherichia coli lacZ transcription and translation initiation information. This C-terminal portion of RsaA was secreted into the growth medium, confirming the presence of a C-terminal secretion signal. The use of the RsaA C terminus for the secretion of heterologous proteins in C. crescentus was explored by fusing 109 amino acids of an envelope glycoprotein from infectious hematopoietic necrosis virus, a pathogen of salmonid fish, to the last 242 amino acids of the RsaA C terminus. The resulting hybrid protein was successfully secreted into the growth medium and accounted for 10% of total protein in a stationary-phase culture. Based on these results and features of the RsaA primary sequence, we propose that the C. crescentus S-layer protein is secreted by a type I secretion system, relying on a stable C-terminal secretion signal in a manner analogous to E. coli alpha-hemolysin, the first example of an S-layer protein secreted by such a pathway.

Biotechnology and biomimetic with crystalline bacterial cell surface layers (S-layers)

Crystalline bacterial cell surface layers (S-layers) are the outermost cell envelope component of many eubacteria and archaeobacteria. S-layers are composed of a single protein or glycoprotein species and exhibit oblique, square or hexagonal lattice symmetry. Pores passing through these monomolecular arrays show identical size and morphology, and functional groups are aligned in well-defined positions and orientations. Due to these unique features, S-layers have broad application potential in biotechnology including functioning as biomimetic membranes. Presently, S-layers are used (i) for the production of isoporous ultrafiltration membranes with very well defined molecular sieving and adsorption properties, (ii) as matrices for the controlled immobilization of biologically active macromolecules (e.g., enzymes, antibodies, ligands) as required for biosensors, affinity membranes and affinity microparticles as well as for solid phase assays, (iii) as stabilizing structures for Langmuir-Blodgett films and liposomes and (iv) as carriers and adjuvants for weakly immunogenic antigens and haptens.

A specific PulD homolog is required for the secretion of paracrystalline surface array subunits in Aeromonas hydrophila

Aeromonas hydrophila is an important pathogen of fish, and its high-virulence strains display a two-dimensional paracrystalline layer (S-layer) on their outermost surfaces. The nucleotide sequence of a 4.1-kb region located 700 bp upstream of the A. hydrophila TF7 S-layer protein gene (ahsA) has been determined. A sequence analysis of the region revealed the presence of three complete open reading frames ending in a gene encoding a 79.8-kDa polypeptide that shows high homology to the PulD family of secretion proteins. The sequenced region displays both organizational and sequence homology to the Xanthomonas campestris pv. campestris Xps secretory system. Insertional inactivation of the spsD (S-protein secretion D) gene showed that the loss of expression of the PulD homolog coincided with the localization of the S-protein in the periplasm and the loss of the S-layer from the surface of the bacterium. However, the secretion of the enzymes hemolysin, amylase, and protease was unaffected in the mutant with the nonfunctional spsD gene, as was the export of flagella and fimbrial proteins. Southern blot analysis showed that the spsD gene was not conserved among all strains of S-protein-producing A. hydrophila or Aeromonas veronii biotype sobria. Use of the promoterless chloramphenicol acetyltransferase gene showed that unlike pulD and its homologs, spsD contains its own promoter. A. hydrophila has been shown to contain the exe operon, which is responsible for the secretion of a number of extracellular enzymes in this bacterium. A fragment of DNA was generated from the exeD gene of A. hydrophilia Ah65 by PCR and was subsequently used in hybridization studies to probe the chromosome of A. hydrophila TF7. The presence of an exeD homolog in A. hydrophila TF7 was found; therefore, the spsD gene encodes a second pulD homolog that displays a high specificity for the secretion of the S-protein. This gene appears to be part of a second terminal branch of the general secretory pathway in A. hydrophila.

Purification and characterization of the major surface array protein from the avirulent Bacillus anthracis Delta Sterne-1

Many prokaryotic organisms possess surface layer (S-layer) proteins that are components of the outermost cell envelope. With immunogold labeling, it was demonstrated that the protein extractable antigen 1 (EA1) was localized on the outer surface and specifically to cell wall fragments from Bacillus anthracis which retained the S layer. When grown in rich medium under aerobic conditions, the avirulent strain Delta Sterne-1 released large amounts of EA1 into the medium. This EA1 had no higher-order structure initially but formed two-dimensional crystals under defined conditions. The released EA1 was purified in aqueous buffers with a three-step procedure and found to have a mass of 95 kDa when subjected to denaturing sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE). N-terminal sequence data revealed exact identity to the first eight residues of the S-layer protein from B. thuringiensis 4045. Gel permeation chromatography of the purified EA1 under nondenaturing conditions revealed a single peak corresponding to a mass of approximately 400 kDa, suggesting that a tetramer or dimer of dimers was the primary species in solution. SDS-PAGE of EA1 purified in the absence of protease inhibitors revealed specific proteolytic processing to an 80-kDa form, which immunoreacted with polyclonal anti-EA1 antibodies. This proteolytic cleavage of EA1 to 80 kDa was duplicated with purified EA1 and the protease trypsin or pronase.

The S-layer from Bacillus stearothermophilus DSM 2358 functions as an adhesion site for a high-molecular-weight amylase

The S-layer lattice from Bacillus stearothermophilus DSM 2358 completely covers the cell surface and exhibits oblique symmetry. During growth of B. stearothermophilus DSM 2358 on starch medium, three amylases with molecular weights of 58,000, 98,000, and 184,000 were secreted into the culture fluid, but only the high-molecular-weight enzyme was found to be cell associated. Studies of interactions between cell wall components and amylases revealed no affinity of the high-molecular-weight amylase to isolated peptidoglycan. On the other hand, this enzyme was always found to be associated with S-layer self-assembly products or S-layer fragments released during preparation of spheroplasts by treatment of whole cells with lysozyme. The molar ratio of S-layer subunits to the bound amylase was approximately 8:1, which corresponded to one enzyme molecule per four morphological subunits. Immunoblotting experiments with polyclonal antisera against the high-molecular-weight amylase revealed a strong immunological signal in response to the enzyme but no cross-reaction with the S-layer protein or the smaller amylases. Immunogold labeling of whole cells with anti-amylase antiserum showed that the high-molecular-weight amylase is located on the outer face of the S-layer lattice. Because extraction of the amylase was possible without disintegration of the S-layer lattice into its constituent subunits, it can be excluded that the enzyme is incorporated into the crystal lattice and participates in the self-assembly process. Affinity experiments strongly suggest the presence of a specific recognition mechanism between the amylase molecules and S-layer protein domains either exposed on the outermost surface or inside the pores. In summary, results obtained in this study confirmed that the S-layer protein from B. stearothermophilus DSM 2358 functions as an adhesion site for a high-molecular-weight amylase.

Sequence analysis of the sbsA gene encoding the 130-kDa surface-layer protein of Bacillus stearothermophilus strain PV72

Bacillus stearothermophilus (Bs) contains a surface-layer (S-layer) protein (SbsA), which forms a hexagonal array on the cell wall. In order to understand the structural/functional relationship of SbsA from Bs PV72, the entire nucleotide (nt) sequence of the sbsA gene was determined from three overlapping fragments. The 3'-end was cloned and expressed in Escherichia coli, whereas the 5'-region was amplified from the genome of Bs PV72 by the polymerase chain reaction using two overlapping fragments. The open reading frame (3684 nt) of sbsA is predicted to encode a protein of 1228 amino acids (aa). The SbsA is synthesized with a leader sequence of 30 aa. The predicted SbsA aa profile was similar to most other sequenced S-layer proteins, containing more acidic than basic aa (pI 5.1) and a very low amount of sulfur-containing aa. Based on aa sequence data, SbsA has weak homology of with the S-layer proteins from B. sphaericus, Rickettsia rickettsii, B. brevis HPD31 and B. brevis 47 (OWP).

Isolation of two physiologically induced variant strains of Bacillus stearothermophilus NRS 2004/3a and characterization of their S-layer lattices

During growth of Bacillus stearothermophilus NRS 2004/3a in continuous culture on complex medium, the chemical properties of the S-layer glycoprotein and the characteristic oblique lattice were maintained only if glucose was used as the sole carbon source. With increased aeration, amino acids were also metabolized, accompanied by liberation of ammonium and by changes in the S-layer protein. Depending on the stage of fermentation at which oxygen limitation was relieved, two different variants, one with a more delicate oblique S-layer lattice (variant 3a/V1) and one with a square S-layer lattice (variant 3a/V2), were isolated. During the switch from the wild-type strain to a variant or from variant 3a/V2 to variant 3a/V1, monolayers of two types of S-layer lattices could be demonstrated on the surfaces of single cells. S-layer proteins from variants had different molecular sizes and a significantly lower carbohydrate content than S-layer proteins from the wild-type strain did. Although the S-layer lattices from the wild-type and variant strains showed quite different protein mass distributions in two- and three-dimensional reconstructions, neither the amino acid composition nor the pore size, as determined by permeability studies, was significantly changed. Peptide mapping and N-terminal sequencing results strongly indicated that the three S-layer proteins are encoded by different genes and are not derived from a universal precursor form.

Crystalline bacterial cell surface layers

Crystalline arrays of proteinaceous subunits forming surface layers (S-layers) are one of the most commonly observed prokaryotic cell envelope structures. They are ubiquitous amongst Gram-positive and Gram-negative archeaobacteria and eubacteria and, if present, account for the major protein species produced by the cells. S-layers can provide organisms with a selection advantage by providing various functions including protective coats, molecular sieves, ion traps and structures involved in cell surface interactions. S-layers were identified as contributing to virulence when present as a structural component of pathogens. In Gram-negative archaeobacteria they are involved in determining cell shape and cell division. The crystalline arrays reveal a broad-application potential in biotechnology, vaccine development and molecular nanotechnology.

Transcriptional analysis of the Aeromonas salmonicida S-layer protein gene vapA

The vapA gene of Aeromonas salmonicida encodes the subunit of the surface protein array known as A-layer. Nucleotide sequence analysis of the 374 bp of DNA immediately upstream of vapA revealed two potential promoter sequences and other possible regulatory sequences. Sequencing and polymerase chain reaction analysis showed that the region was conserved in wild-type A. salmonicida. Primer extension and Northern (RNA) blot analysis showed that vapA transcription in A. salmonicida was directed predominantly by a distal promoter, P1, resulting in a 1.7-kb unit-length mRNA with an untranslated 181-nucleotide leader sequence which contained two predicted low-free-energy stem-loop structures. Northern analysis of cells grown at 15 degrees C showed that vapA transcript production peaked during the mid-log phase of growth (A600 = 0.25). At 15 degrees C, the half-life of the vapA mRNA was 22 min, while at 20 degrees C, the half-life was significantly shorter, 11 min. The amount of vapA transcript produced was reduced by growth in the presence of the DNA gyrase inhibitors nalidixic acid and novobiocin. Environmental factors such as growth temperature and atmospheric oxygen tension also affected the quantity of vapA mRNA. vapA transcript could not be detected in mutants which produced either low levels of full-length or truncated A protein or no detectable A protein.

Characterization of the cell wall of the sheathed methanogen Methanospirillum hungatei GP1 as an S layer

The cell wall of Methanospirillum hungatei GP1 is a labile structure that has been difficult to isolate and characterize because the cells which it encases are contained within a sheath. Cell-sized fragments, 560 nm wide by several micrometers long, of cell wall were extracted by a novel method involving the gradual drying of the filaments in 2% (wt/vol) sodium dodecyl sulfate and 10% (wt/vol) sucrose in 50 mM N-2-hydroxyethylpiperazine-N'-2-ethanesulfonic acid (HEPES) buffer containing 10 mM EDTA. The surface was a hexagonal array (a = b = 15.1 nm) possessing a helical superstructure with a ca. 2.5 degrees pitch angle. In shadowed relief, the smooth outer face was punctuated with deep pits, whereas the inner face was relatively featureless. Computer-based two-dimensional reconstructed views of the negatively stained layer demonstrated 4.0- and 2.0-nm-wide electron-dense regions on opposite sides of the layer likely corresponding to the openings of funnel-shaped channels. The face featuring the larger openings best corresponds to the outer face of the layer. The smaller opening was encircled by a stalk-like mass from which 2.2-nm-wide protrusions were resolved. The cell wall in situ was degraded at pH 9.6 at 56 degrees C but was unaffected at pH 7.4 at the same temperature. The cell wall was composed of two nonglycosylated polypeptides (114 and 110 kDa). The cell wall resembled an archaeal S layer and may function in regulating the passage of small (< 10-kDa) sheath precursor proteins.

S-layer protein from Thermus thermophilus HB8 assembles into porin-like structures

The cells of the extreme thermophile Thermus thermophilus are surrounded by a regular layer (S-layer) built up by a protein with an apparent molecular mass of 100 kDa (P100). From purified membrane fractions, three different class of two-dimensional crystals can be obtained by following alternative extractive procedures. One of these crystals, with p6 symmetry, clearly represents the native S-layer detected by freeze etching on whole cells, while the other two, showing p2 and p3 symmetries respectively, closely resemble aggregates of bacterial porins. We demonstrate here by limited proteolysis and Western blotting the surprising fact that the protein component of the three crystals is the P100 protein. Our biochemical data also show how this protein forms Ca(2+)-stabilized trimers in each crystal, which support the structural analysis that points to p3 units as the common structural block in all of them, and again resembles the situation found in bacterial porins.

Large-scale recrystallization of the S-layer of Bacillus coagulans E38-66 at the air/water interface and on lipid films

S-layer protein isolated from Bacillus coagulans E38-66 could be recrystallized into large-scale coherent monolayers at an air/water interface and on phospholipid films spread on a Langmuir-Blodgett trough. Because of the asymmetry in the physiochemical surface properties of the S-layer protein, the subunits were associated with their more hydrophobic outer face with the air/water interface and oriented with their negatively charged inner face to the zwitterionic head groups of the dipalmitoylphosphatidylcholine and dipalmitoylphosphatidylethanolamine (DPPE) monolayer films. The dynamic crystal growth at both types of interfaces was first initiated at several distant nucleation points. The individual monocrystalline areas grew isotropically in all directions until the front edge of neighboring crystals was met. The recrystallized S-layer protein and the S-layer-DPPE layer could be chemically cross-linked from the subphase with glutaraldehyde.

Antigenic properties of Campylobacter rectus (Wolinella recta) major S-layer proteins

The antigenic properties of the surface layer (S-layer) proteins of various Campylobacter rectus strains including 24 clinical isolates and the type strain ATCC 33238 were examined. S-layer proteins were extracted from whole cells by acid treatment according to the method of McCoy et al. (Infect. Immun. 11, 517-525, 1975). The acid extracts from 23 of the isolates and ATCC 33238 contained two major proteins with molecular masses of 130 kDa and 150 kDa, both of which were identified as subunits of the S-layer after comparison with the protein profiles of acid-treated (S-layer-deficient) cells. An S-layer protein from one isolate (CI-808) demonstrated a different molecular mass (160 kDa). Both the 150-kDa proteins of ATCC 33238 and isolate CI-306 and the 160-kDa protein of CI-808 were purified by ion-exchange chromatography in the presence of urea. In Ouchterlony immunodiffusion experiments with these purified proteins and rabbit antiserum raised to each purified protein, both common and strain-specific antigenic determinants were identified in the C. rectus S-layer proteins.

Relevance of charged groups for the integrity of the S-layer from Bacillus coagulans E38-66 and for molecular interactions

In this paper, the importance of charged amino and carboxyl groups for the integrity of the cell surface layer (S-layer) lattice from Bacillus coagulans E38-66 and for the self-assembly of the isolated subunits was investigated. Amidination of the free amino groups which preserved their positive net charge had no influence on both. On the other hand, acetylation and succinylation, which converted the amino groups into either neutral or negatively charged groups, and amidation of carboxyl groups were accompanied by the disintegration or at least by the loss of the regular structure of the S-layer lattice. Treatment of S-layer monolayers with the zero-length cross-linker carbodiimide led to the introduction of peptide bonds between activated carboxyl groups and amino groups from adjacent subunits. This clearly indicated that in the native S-layer lattice the charged groups are located closely enough for direct electrostatic interactions. Under disrupting conditions in which the S-layer polypeptide chains were unfolded, 58% of the Asx and Glx residues could be amidated, indicating that they occur in the free carboxylic acid form. As derived from chemical modification of monolayer self-assembly products, about 90% of the lysine and 70% of the aspartic and glutamic acid residues are aligned on the surface of the S-layer protein domains. This corresponded to 45 amino groups and to 63 carboxyl groups per S-layer subunit. Labelling experiments with macromolecules with different sizes and charges and adsorption studies with ion-exchange particles revealed a surplus of free carboxyl groups on the inner and on the outer faces of the S-layer lattice. Since the carboxyl groups on the outer S-layer face were accessible only for protein molecules significantly smaller then the S-layer protomers or for positively charged, thin polymer chains extending from the surface of ion-exchange beads, the negatively charged sites must be located within indentations of the corrugated S-layer protein network. This was in contrast to the carboxyl groups on the inner S-layer face, which were found to be exposed on elevations of the S-layer protein domains (D. Pum, M. Sára, and U.B. Sleytr, J. Bacteriol. 171:5296-5303, 1989).

Introduction of sulphhydryl groups into the crystalline bacterial cell surface layer protein from Bacillus stearothermophilus PV72 and its application as an immobilization matrix

The crystalline cell surface layer (S-layer) from Bacillus stearothermophilus PV72 was used as a matrix for reversible immobilization of beta-D-galactosidase via disulphide bonds. In order to obtain an immobilization matrix stable towards acid, alkali and reducing agents such as dithiothreitol (DTT), the S-layer subunits were first cross-linked with glutaraldehyde. This was done in a way whereby 75% of the free amino groups remained unmodified, and then could be completely converted into sulphhydryl groups upon reaction with the monofunctional imidoester iminothiolane. After activation of the sulphhydryl groups with 2,2'-dipyridyldisulphide, 550 micrograms beta-D-galactosidase could be immobilized per milligram of S-layer protein, which corresponds to one beta-D-galactosidase molecule [relative molecular mass (M(r)), 116,000] per two S-layer subunits (M(r), 130,000). At least 90% of the sulphhydryl groups from the S-layer protein could be regenerated for further activation by cleaving the disulphide bonds with DTT. In comparative studies beta-D-galactosidase was linked to carbodiimide-activated carboxyl groups of the S-layer protein.

Evidence for an S-layer protein pool in the peptidoglycan of Bacillus stearothermophilus

Intact cells of Bacillus stearothermophilus PV72 revealed, after conventional thin-sectioning procedures, the typical cell wall profile of S-layer-carrying gram-positive eubacteria consisting of a ca. 10-nm-thick peptidoglycan-containing layer and a ca. 10-nm-thick S layer. Cell wall preparations obtained by breaking the cells and removing the cytoplasmic membrane by treatment with Triton X-100 revealed a triple-layer structure, with an additional S layer on the inner surface of the peptidoglycan. This profile is characteristic for cell wall preparations of many S-layer-carrying gram-positive eubacteria. Among several variants of strain PV72 obtained upon single colony isolation, we investigated the variant PV72 86-I, which does not exhibit an inner S layer on isolated cell walls but instead possesses a profile identical to that observed for intact cells. In the course of a controlled mild autolysis of isolated cell walls, S-layer subunits were released from the peptidoglycan of the variant and assembled into an additional S layer on the inner surface of the walls, leading to a three-layer cell wall profile as observed for cell wall preparations of the parent strain. In comparison to conventionally processed bacteria, freeze-substituted cells of strain PV72 and the variant strain revealed in thin sections a ca. 18-nm-wide electron-dense peptidoglycan-containing layer closely associated with the S layer. The demonstration of a pool of S-layer subunits in such a thin peptidoglycan layer in an amount at least sufficient for generating one coherent lattice on the cell surface indicated that the subunits must have occupied much of the free space in the wall fabric of both the parent strain and the variant. It can even be speculated that the rate of synthesis and translation of the S-layer protein is influenced by the packing density of the S-layer subunits in the periplasm of the cell wall delineated by the outer S layer and the cytoplasmic membrane. Our data indicate that the matrix of the rigid wall layer inhibits the assembly of the S-layer subunits which are in transit to the outside.

Sequence of the S-layer gene of Thermus thermophilus HB8 and functionality of its promoter in Escherichia coli

The nucleotide sequence of the slpA gene, which is responsible for the synthesis of the S-layer protein of Thermus thermophilus HB8, is described. This gene is transcribed as a unit in which the coding region is preceded by a 127-base-long leader mRNA sequence. The promoter region is also recognized by the RNA polymerase of Escherichia coli because of the presence of homologous -35 and -10 boxes. Homologies with other promoters from Thermus spp. are also presented.

The S-layer of Caulobacter crescentus: three-dimensional image reconstruction and structure analysis by electron microscopy

The regular surface protein structure (S-layer) of Caulobacter crescentus was analyzed by electron microscopy and three-dimensional image reconstruction to a resolution of 2 nm. Projections showed that the S-layer is an array of ring structures, each composed of six subunits that are arranged on a lattice with p6 symmetry. Three-dimensional reconstructions showed that the ring subunits were approximately rod-shaped structures and were perpendicular to the plane of the array, with a linker arm emanating from approximately the middle of the rod, accounting for the connections between the rings. The calculated subunit mass was ca. 100 kDa, very close to the size of RsaA (the protein known to be at least the predominant species in the S-layer) predicted from the DNA sequence of the rsaA gene. The core region of the rings creates an open pore 2.5 to 3.5 nm in diameter. The size of the gaps between the neighboring unit cells is in the same range, suggesting a uniform porosity predicted to exclude molecules larger than ca. 17 kDa. Attempts to remove membrane material from S-layer preparations with detergents revealed that the structure spontaneously rearranged into a mirror-image double layer. Negative-stain and thin-section electron microscopy examination of colonies of C. crescentus strains with a mutation in a surface molecule involved in the attachment of the S-layer showed that shed RsaA protein organized into large sheets. The sheets in turn organized into stacks that tended to accumulate near the upper surface of the colony. Image reconstruction indicated that these sheets were also precise mirror-image double layers, and thickness measurements obtained from thin sections were consistent with this finding. The sheets were absent when these mutant strains were grown without calcium, supporting other data that calcium is involved in attachment of the S-layer to a surface molecule and perhaps in subunit-subunit interactions. We propose that when the membrane is removed from S-layer fragments by detergents or the attachment-related surface molecule is absent, the attachment sites of the S-layer align precisely to form a double layer via a calcium interaction.