Effect of probe force on the resolution of atomic force microscopy of DNA

The Kinetoplast of Trypanosomatids: From Early Studies of Electron Microscopy to Recent Advances in Atomic Force Microscopy

The kinetoplast is a specialized region of the mitochondria of trypanosomatids that harbors the most complex and unusual mitochondrial DNA found in nature. Kinetoplast DNA (kDNA) is composed of thousands of circular molecules topologically interlocked to form a single network. Two types of DNA circles are present in the kinetoplast: minicircles (0.5-10 kb) and maxicircles (20-40 kb). Knowledge of kinetoplast architecture is crucial to understanding the replication and segregation of kDNA circles because the molecules involved in these processes are precisely positioned in functional domains throughout the kinetoplast. The fine structure of the kinetoplast was revealed in early electron microscopy (EM) studies. However, an understanding of the topological organization of kDNA was only demonstrated after the development of protocols to separate kDNA from nuclear DNA, followed by EM observations. Electron microscopy analysis of thin sections of trypanosomatids, spreading of isolated kDNA networks onto EM grids, deep-etching studies, and cytochemical and immunocytochemical approaches are examples of techniques that were useful for elucidating the structure and replication of the kinetoplast. Recently, atomic force microscopy has joined this set of techniques and improved our knowledge about the kDNA network and revealed new details about kDNA topology in trypanosomatids.

Preparation of DNA and nucleoprotein samples for AFM imaging

Sample preparation techniques allowing reliable and reproducible imaging of DNA with various structures, topologies and complexes with proteins are reviewed. The major emphasis is given to methods utilizing chemical functionalization of mica, enabling preparation of the surfaces with required characteristics. The methods are illustrated by examples of imaging of different DNA structures. Special attention is given to the possibility of AFM to image the dynamics of DNA at the nanoscale. The capabilities of time-lapse AFM in aqueous solutions are illustrated by imaging of dynamic processes as transitions of local alternative structures (transition of DNA between H and B forms). The application of AFM to studies of protein-DNA complexes is illustrated by a few examples of imaging site-specific complexes, as well as such systems as chromatin. The time-lapse AFM studies of protein-DNA complexes including very recent advances with the use of high-speed AFM are reviewed.

DNA height in scanning force microscopy

The measured height of DNA molecules adsorbed on a mica substrate by scanning probe microscopy is always less than the theoretical diameter. In this paper we show that, when imaged in ambient conditions, the molecules are usually immersed in the salt layer used to adsorb them to the substrate. This layer distorts the measurement of DNA height and is the main source of error but not the only one. We have performed different experiments to study this problem using two scanning force techniques: non-contact tapping mode in air and jumping mode in aqueous solution, where the dehydration phenomena is minimized. Height measurements of DNA in air using tapping mode reveal a height of 0.7+/-0.2nm. This value increases up to 1.5+/-0.2nm when the salt layer, in which the molecules are embedded, is removed. Jumping experiments in water give a value of 1.4+/-0.3nm when the maximum applied force is 300pN and 1.8+/-0.2nm at very low forces, which confirms the removal of the salt layer. Still, in all our experiments, the measured height of the DNA is less than the theoretical value. Our results show that although the salt layer present is important, some sample deformation due to either the loading force of the tip or the interaction with the substrate is also present.

Nanodissection and noncontact imaging of plasmid DNA with an atomic force microscope

In this paper we report that a combination of noncontact and contact atomic force microscopy is a convenient and reliable method for imaging and dissecting single plasmid deoxyribonucleic acid (DNA) strands on mica at ambient conditions without leaving feedback and without damage to the scanning tips. The width and thickness measured at different points of the DNA strands agree with literature data and are the same before and after dissection.

Scanning force microscopy of DNA molecules elongated by convective fluid flow in an evaporating droplet

Scanning force microscopy (SFM) was used to image intact, nearly fully elongated lambda bacteriophage DNA molecules, fixed onto freshly cleaved mica surfaces. Molecular elongation and fixation were accomplished using a newly characterized fixation technique, termed "fluid fixation." Here convective fluid flows generated within an evaporating droplet of DNA solution efficiently elongate DNA molecules for fixation onto suitably charged surfaces. SFM images of a very large bacteriophage genome, G, showed the presence of double-stranded bubbles. We speculate that these structures may contain putative replication forks. Overall, the experiments presented here demonstrate the viability of using fluid fixation for the preparation of DNA molecules for SFM imaging. The combination of largely automatable optically based techniques with the high-resolution SFM imaging presented here will likely produce a high-throughput system for detailed physical mapping of genomic DNA or clones.

Immobilization strategies for biological scanning probe microscopy

Biological atomic force microscopy (AFM) is now established as a method for studying the structure and function of biomolecular objects at the solid-liquid interface. Major progress in this field is linked to new developments in instrumentation, a better understanding of tip-sample interactions, and improved sample preparation techniques. In this review, the most common strategies for biomolecular immobilization with respect to biological AFM applications are summarized.

Fabrication of a new substrate for atomic force microscopic observation of DNA molecules from an ultrasmooth sapphire plate

A new stable substrate applicable to the observation of DNA molecules by atomic force microscopy (AFM) was fabricated from a ultrasmooth sapphire (alpha-Al2O3 single crystal) plate. The atomically ultrasmooth sapphire as obtained by high-temperature annealing has hydrophobic surfaces and could not be used for the AFM observation of DNA. However, sapphire treated with Na3PO4 aqueous solution exhibited a hydrophilic character while maintaining a smooth surface structure. The surface of the wet-treated sapphire was found by x-ray photoelectron spectroscopy and AFM to be approximately 0.3 nm. The hydrophilic surface character of the ultrasmooth sapphire plate made it easy for DNA molecules to adhere to the plate. Circular molecules of the plasmid DNA could be imaged by AFM on the hydrophilic ultrasmooth sapphire plate.

Calcium regulation of nuclear pore permeability

The nuclear envelope is an integral part of the structural framework of the nucleus, and is involved in organizing intranuclear events. It serves as a selective barrier, actively transporting proteins required for normal nuclear function and exporting RNA. The movement of molecules across the nuclear envelope is critical for cellular homeostasis, and it allows cells to respond to external events. The only known pathway for direct communication between the cytoplasm and the nucleoplasm of a cell is through the nuclear pore complex. In the past decade, rapid advances have been made in elucidating the structure and function of the nuclear pore complex. Yet, researchers are just beginning to identify some of the regulatory mechanisms controlling transport through the pore complex. The nucleus is surrounded by a Ca2+ storage compartment, which sequesters and releases Ca2+ in response to intracellular second messengers, Recent evidence suggests that the nuclear Ca2+ store may indirectly regulate passive diffusion through the nuclear pore complex. The evidence for Ca2+ regulation of the nuclear pore complex will be discussed, along with the introduction of the simplest, testable model to describe the observations.

Strained DNA is kinked by low concentrations of Zn2+

A novel atomic force microscope with a magnetically oscillated tip has provided unprecedented resolution of small DNA fragments spontaneously adsorbed to mica and imaged in situ in the presence of divalent ions. Kinks (localized bends of average angle 78 degrees) were observed in axially strained minicircles consisting of tandemly repeated d(A)5 and d(GGGCC[C]) sequences. The frequency of kinks in identical minicircles increased 4-fold in the presence of 1 mM Zn2+ compared with 1 mM Mg2+. Kinking persisted in mixed Mg2+/Zn2+ electrolytes until the Zn2+ concentration dropped below 100 microM, indicating that this type of kinking may occur under physiological conditions. Kinking appears to replace intrinsic bending, and statistical analysis shows that kinks are not localized within any single sequence element. A surprisingly small free energy is associated with kink formation.

High-Resolution Atomic Force Microscopy of Native Valonia Cellulose I Microcrystals

We have studied the surface of native Valonia cellulose I microcrystals under propanol and waterby atomic force microscopy (AFM). Ultra-high-resolution images of the surface are presented, as well as lower resolution morphological observations of whole crystals. The pitch of 0.52 nm along the molecule due to the asymmetrical glucose unit and the intermolecular spacing of approximately 0.6 nm are clearly resolved in both imaging environments. The relationship between the crystalline bulk and the surface are discussed, with particular attention being paid to previous crystallographic studies. We also show that the glucose units along the cellulose chains are not topographically equivalent due to the twofold screw symmetry and accordingly present strong evidence of triclinic character by direct surface imaging, rather than by taking average measurements in reciprocal space. The crystallographic distinction between monoclinic and triclinic structure is a displacement of the cellulose chains by a quarter of the c axis period, resulting in either a stagger or a diagonal shifting, respectively, of the cellobiose unit along the chain axis by 0.26 nm. This structural identification (in real space) represents, as far as we are aware, the highest resolution AFM imaging of a biological specimen to date. This study opens up the future possibility of identifying the localized triclinic or monoclinic nature of the Valonia cellulose surface with AFM.

Cryo-atomic force microscopy of smooth muscle myosin

The motor and regulatory domains of the head and the 14-nm pitch of the alpha-helical coiled-coil of the tail of extended (6S) smooth-muscle myosin molecules were imaged with cryo atomic force microscopy at 80-85 K, and the effects of thiophosphorylation of the regulatory light chain were examined. The tail was 4 nm shorter in thiophosphorylated than in nonphosphorylated myosin. The first major bend was invariant, at approximately 51 nm from the head-tail junction (H-T), coincident with low probability in the paircoil score. The second major bend was 100 nm from the H-T junction in nonphosphorylated and closer to a skip residue than the bend (at 95 nm) in thiophosphorylated molecules. The shorter tail and distance between the two major bends induced by thiophosphorylation are interpreted to result from melting of the coiled-coil. An additional bend not previously reported occurred, with a lower frequency, approximately 24 nm from the H-T. The range of separation between the two heads was greater in thiophosphorylated molecules. Occasional high-resolution images showed slight unwinding of the coiled-coil of the base of the heads. We suggest that phosphorylation of MLC20 can affect the structure of extended, 6S myosin.

Imaging polysaccharides by atomic force microscopy

Techniques have been developed for the routine reliable imaging of polysaccharides by atomic force microscopy (AFM). The polysaccharides are deposited from aqueous solution onto the surface of freshly cleaved mica, air dried, and then imaged under alcohols. The rationale behind the development of the methodology is described and data is presented for the bacterial polysaccharides xanthan, acetan, and the plant polysaccharides l-carrageenan and pectin. Studies on uncoated polysaccharides have demonstrated the improved resolution achievable when compared to more traditional metal-coated samples or replicas. For acetan the present methodology has permitted imaging of the helical structure. Finally, in addition to data obtained on individual polysaccharides, AFM images have also been obtained of the network structures formed by kappa-carrageenan and gellan gum.

High-resolution atomic-force microscopy of DNA: the pitch of the double helix

Using a cationic lipid bilayer, we show that DNA can be reliably adsorbed to the bilayer surface for atomic force microscopy (AFM) in aqueous buffers at high resolution. The measured width of the dsDNA is close to 2 nm, and a periodic modulation on dsDNA is reproducibly detected by the AFM. The measured period is 3.4 +/- 0.4 nm, in excellent agreement with the known pitch of the double helix. The right-handedness of the double helix is directly discernible in high resolution AFM images. Thus, this approach can be readily applied to the study of DNA-protein interactions, as well as sequence mapping at high resolution.

Cryo atomic force microscopy: a new approach for biological imaging at high resolution

A low-temperature atomic force microscope (cryo-AFM), operated in liquid nitrogen vapor, has been constructed for biological applications. The system provides an adjustable imaging temperature from 77 to 220 K with atomic resolution achieved on crystalline specimens. Imaging with NaCl microcrystals demonstrates that the system is free from surface contamination. Below 100 K, several biological specimens, including immunoglobulins and DNA as well as red blood cell ghosts, were imaged at high spatial resolution. Measurements on individual macromolecules showed that the mechanical strength is significantly greater at cryogenic temperatures with an estimated Young's modulus 1000-10,000 times that of a hydrated protein at room temperature, providing a solid basis for future improvements and applications of cryo-AFM in structural biology.

Progress in high resolution atomic force microscopy in biology

The atomic force microscope (AFM) was invented by Binnig, Quate and Gerber less than 10 years ago (Binniget al. 1986). In their first prototype, a piece of goldfoil was used as the cantilever, with a crushed diamond tip mounted at the end. On the back of the cantilever, a tunnelling junction was used to monitor the deflection of the cantilever (the gold-foil) when the specimen was scanned with the tip in contact with the surface. Thus, the surface topography of the specimen was obtained with a resolution critically dependent on the sharpness of the tip provided the deformation of the specimen was not serious. Even with such a crude set-up, they managed to obtain a lateral resolution of ˜ 30 Å and a vertical resolution of better than 1 Å on an amorphous A12O3surface. The operating principle of such an instrument is deceptively simple. However, such an arrangement was inconvenient for routine operations and unsuitable for imaging hydrated specimens, because the tunnelling junction is easily contaminated in air and works poorly in aqueous solutions (Alexanderet al. 1989). As a result, the application of this type of AFM to biological samples was rare (Engel, 1991).

A new DNA nanostructure, the G-wire, imaged by scanning probe microscopy

G-DNA is a polymorphic family of quadruple helical nucleic acid structures containing guanine tetrad motifs [G-quartets; Williamson, J.R., Raghuraman, M.K. and Cech, T.R. (1989) Cell 59, 871-880; Williamson, J.R. (1993) Proc. Natl. Acad. Sci. USA 90, 3124-3124]. Guanine rich oligonucleotides that are self-complimentary, as found in many telomeric G-strand repeat sequences, form G-DNA in the presence of monovalent and/or divalent metal cations. In this report we use the atomic force microscope (AFM) to explore the structural characteristics of long, linear polymers formed by the telomeric oligonucleotide d(GGGGTTGGGG) in the presence of specific metal cations. In the AFM these polymers, termed G-wires, appear as filaments whose height and length are determined by the metal ions present during the self-assembly process. The highly ordered, controllable self-assembly of G-wires could provide a basis for developing advanced biomaterials.

Scanning probe microscopy in microbiology

Scanning probe microscopy (SPM) is emerging as an important alternative to electron microscopy as a technique for analyzing submicron details on biological surfaces. Microbiological specimens such as viruses, bacteriophages, and ordered bacterial surface layers and membranes have played an important role in the development of scanning tunnelling microscopy (STM) and atomic force microscopy (AFM) in cellular and molecular biology. Early STM studies involving metal-coated bacteriophage T4 polyheads, Methanospirillum hungatei, and Deinococcus radiodurans HPI layer clearly demonstrated that resolution was comparable to TEM on similarly prepared specimens and only limited by metal graininess. However, except for thin films or layers, novel biological information has been difficult to obtain since imaging native surfaces of such biomaterials as proteins or nucleic acids by STM proved to be unreliable. With the development of atomic force microscopes, which allow imaging of similar native structures, SPM applications have widened to include straightforward surface structure analysis, analysis of surface elastic and inelastic properties, bonding force measurements between molecules, and micro-manipulations of such individual molecules as DNA. AFM images have progressed from relatively crude representations of specimen topography to nanometer scale representations of native hydrated surfaces. It appears from the study of microbiological specimens that direct visualization of dynamic molecular events or processes may soon become a reality.

Recent advances in biological atomic force microscopy

Recent developments in biological atomic force microscopy are reviewed. In addition to the advances in methodology, new structural information of different biological systems revealed by the atomic force microscopy is also presented. A discussion regarding the contrast, resolution and specimen deformation is provided based on a theoretical model.

Stretched DNA structures observed with atomic force microscopy

Double-stranded DNA molecules are occasionally found that appear to be straightened and stretched in atomic force microscope (AFM) images. Usually pBS+ plasmid and lambda DNA show relaxed structures with bends and kinks along the strands and have measured contour lengths consistent to about 5-7%; they also appear not to cross over each other, except in very high concentrations. The anomalous molecules observed here, compared with the majority of molecules in the preparation, show contour lengths increased by as much as 80% and have measured heights of about half that of normal relaxed DNA. Some molecules also appear to be in transition between stretched and relaxed forms. These observations are consistent with an uncoiling of the DNA helix without breakage of the covalent bonds in the deoxyribose-phosphate backbone.

Probing specific molecular conformations with the scanning force microscope. Complexes of plasmid DNA and anti-Z-DNA antibodies

An anti-Z-DNA IgG antibody was used to probe for the left-handed Z-DNA conformation of a d(CG)11 insert in a negatively supercoiled plasmid DNA (pAN022). The complexes were spread on mica in the presence of a quaternary ammonium detergent benzyldimethylalkylammonium chloride and imaged with a scanning force microscope (SFM). The high affinity anti-Z-DNA antibody was retained even after restriction endonuclease cleavage of the DNA. The two arms in the product molecules had unequal lengths in conformity with the known location of the Z-DNA forming insert. Most complexes exhibited one IgG per DNA molecule. The bound antibodies were up to approximately 35 nm in diameter and extended approximately 2 nm from the mica surface. They were generally in a lateral orientation relative to the DNA, in accordance with prior chemical modification experimental data indicating a bipedal mode of binding for an anti-Z-DNA IgG. However, the SFM images also suggest that the DNA bends to accommodate the two Fab combining regions of the antibody. This study demonstrates the utility of the SFM for investigating conformation-dependent molecular recognition.

New internal structure of spider dragline silk revealed by atomic force microscopy

Atomic force microscopy was used to study the three-dimensional nanometer-scale structure of the dragline silk of Nephila clavipes from microtomed sections of the silk. Contrary to a previously proposed model of randomly distributed protein crystallites interspersed in amorphous regions, a highly organized skin-core structure of the fiber was observed. The skin appeared to be thin with no discernible distinct features. The core consists of pleated fibril-like structures, which are arranged in two concentric cylinders. Upon stretching, the pleats were smoothed out substantially. The mechanical properties of spider silk can quite straightforwardly be related to the newly observed structures.

Structure and stability of pertussis toxin studied by in situ atomic force microscopy

Pertussis toxin, both complete and the B-oligomer, were imaged by atomic force microscopy (AFM), using specimens prepared by simple surface adsorption on mica without further manipulation. The spatial arrangement of the subunits of the B-oligomer was clearly resolved, representing the first protein quaternary structure obtained by AFM in situ. The results suggest that the B-oligomer is a flat pentamer with the two large subunits located next to each other, and the catalytic A-subunit situated at the center above. We found that the B-pentamer was structurally stable for temperatures up to 60 degrees C and within the pH range of 4.5-9.5. It is also demonstrated that the AFM was capable of resolving features down to 0.5 nm on the B-oligomers, indicating its great potential for structural determination.

Scanning force microscopy of circular and linear plasmid DNA spread on mica with a quaternary ammonium salt

Scanning force microscopy (SFM) offers the potential for subnanometer resolution in the investigation of nucleic acids, proteins, and their complexes. SFM is not bound by the requirement of classical transmission electron microscopy (TEM) for contrast enhancement through shadow casting or negative staining. A primary challenge, however, has been the reproducible fixation of samples on an atomically flat surface such as mica. We have developed a method for the routine imaging by SFM of supercoiled, relaxed, and linearized plasmid DNA, immobilized on freshly cleaved mica through the spreading action of benzyldimethylalkylammonium chloride (BAC) at micromolar concentrations. A reproducibly high yield of well-spread, dispersed molecules is obtained and background contamination is minimal. The contour lengths of the relaxed and linearized molecules imaged in air agree well with the helical rise (3.4 A/bp) of B-DNA in solution. We have also introduced the use of quantitative image analysis of SFM images to determine apparent molecular width and height over the entire molecular path.