Salt effects on the interaction of poly(ethylene oxide) and sodium dodecyl sulfate measured by conductivity

Interfacial Structure and Electrostatics Related to Solute Activity in a Model Anionic-Surfactant/Polymer Self-Assembly

Polymer/surfactant composites are used in industry as an excipient for water-insoluble solutes. Such enhanced dissolution ability of composite media is related to the spontaneous formation of pre-micellar polymer surfactant aggregates (PS) at a magnitude of order lower than the surfactant critical micelle concentration in water. Combining electrochemical and spectroscopic studies, we investigate the microscopic interfacial structure (i.e., interface electrostatics and surface polarity) of PS formed in composite media. We establish that in a composite system, a mere change in the polymer concentration at a fixed surfactant concentration makes possible to regulate the counter-ion binding ability, surface potential, surface charge density, packing and surface polarity of the PS interface. Our study shows that the higher dissolution of water-insoluble nonionic solutes in composite media is driven by the depressing of surface charge density and polarity of the PS interface. A similar modulation of the PS interface acts as a barrier for the passive relocation of water-soluble charged solutes into the PS pseudo-phase. The time-resolved fluorescence anisotropy study allows us to underline the effect of surface charge modulation on the dynamical aspects of solutes at the PS interface.

Application of Levan-Rich Digestate Extract in the Production of Safe-to-Use and Functional Natural Body Wash Cosmetics

The study focused on the evaluation of the possibility of using a levan-rich digestate extract in the production of safe and functional body wash cosmetics. Model shower gels were designed and formulated on the basis of raw materials of natural origin. Prepared prototypes contained various extract concentrations (16.7; 33; 50%). A gel without extract was used as a reference. The samples were evaluated for their safety in use and functionality. The results showed that the use of high-concentration levan-rich digestate extract in a shower gel resulted in a significant reduction in the negative impact on the skin. For example, the zein value decreased by over 50% in relation to the preparation without the extract. An over 40% reduction in the emulsifying capacity of hydrophobic substances was also demonstrated, which reduces skin dryness after the washing process. However, the presence of the extract did not significantly affect the parameters related to functionality. Overall, it was indicated that levan-rich digestate extract can be successfully used as a valuable ingredient in natural cleansing cosmetics.

Association between Nonionic Amphiphilic Polymer and Ionic Surfactant in Aqueous Solutions: Effect of Polymer Hydrophobicity and Micellization

The interaction in aqueous solutions of surfactants with amphiphilic polymers can be more complex than the surfactant interactions with homopolymers. Interactions between the common ionic surfactant sodium dodecyl sulfate (SDS) and nonionic amphiphilic polymers of the poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) (PEO-PPO-PEO) type have been probed utilizing a variety of experimental techniques. The polymer amphiphiles studied here are Pluronic F127 (EO₁₀₀PO₆₅EO₁₀₀) and Pluronic P123 (EO₁₉PO₆₉EO₁₉), having the same length PPO block but different length PEO blocks and, accordingly, very different critical micellization concentrations (CMC). With increasing surfactant concentration in aqueous solutions of fixed polymer content, SDS interacts with unassociated PEO-PPO-PEO molecules to first form SDS-rich SDS/Pluronic assemblies and then free SDS micelles. SDS interacts with micellized PEO-PPO-PEO to form Pluronic-rich SDS/Pluronic assemblies, which upon further increase in surfactant concentration, break down and transition into SDS-rich SDS/Pluronic assemblies, followed by free SDS micelle formation. The SDS-rich SDS/Pluronic assemblies exhibit polyelectrolyte characteristics. The interactions and mode of association between nonionic macromolecular amphiphiles and short-chain ionic amphiphiles are affected by the polymer hydrophobicity and its concentration in the aqueous solution. For example, SDS binds to Pluronic F127 micelles at much lower concentrations (~0.01 mM) when compared to Pluronic P123 micelles (~1 mM). The critical association concentration (CAC) values of SDS in aqueous PEO-PPO-PEO solutions are much lower than CAC in aqueous PEO homopolymer solutions.

Novel polymeric biomaterial poly(butyl-2-cyanoacrylate) nanowires: synthesis, characterization and formation mechanism

Poly(butyl-2-cyanoacrylate) (PBCA) nanoparticles have been widely elaborated for nearly half a century. However, PBCA nanowires (PNWs) were seldom investigated. Here, new polymeric biomaterial PNWs were prepared via emulsion polymerization based on the sodium dodecyl sulfate (SDS)-assisted emulsion process. Results indicated that SDS micelles and PBCA polymer can develop surfactant-polymer complexes by self-assembly at room temperature. SDS concentration was confirmed to be the critical parameter for the association of the surfactant and the polymer. With the addition of SDS (0-40 mM), the interaction between SDS and PBCA led to a series of transitions from nanoparticles to nanowires. These morphology transitions were triggered by changing the electrostatic repulsion in the SDS-PBCA system, confirmed by the variety of zeta potential with increasing molar contents of SDS. To overcome the electrostatic repulsion, the complexes underwent transitions from spherical, worm-like (short-cylindrical), to elongated-cylindrical form. Finally, associated with the results from scanning / transmission electron microscopy (SEM / TEM), the elongated-cylindrical PNWs acquired at 20 mM of SDS were chosen to execute cell viability assay, which showed that they had no toxicity but with good-biocompatibility at the doses ≤ 50 μg/ml. These results indicate that the PNWs prepared by this facile-green and low-toxic strategy can potentially work as promising biomaterials in the biomedicine field.

Association between the physical stability of flurbiprofen suspension and the interaction of HPMC/SDS

The anionic surfactant sodium dodecylsulfate (SDS) has improved the physical stability of flurbiprofen (FBP) suspension, which was suspended by 0.2% (w/v) hydroxypropylmethyl cellulose (HPMC, K4M). Therefore, the physical stability of FBP suspensions and the interaction of HPMC/SDS were studied, and a certain association between them was revealed. The anti-solvent precipitation method was used to prepare suspensions. The apparent drug concentration from different sites was evaluated to get the dispersion of drug actually. The process of flocculation and deflocculation with the addition of SDS was caught by analyzing the morphology of the suspended particles. The physical stability of the FBP suspensions was characterized mainly by measuring the re-dispersion time, the zeta potential and particle size. Meanwhile, conductivity measurements were carried out to obtain the characteristic concentrations of SDS in HPMC/SDS system. The viscosities, the abilities for improving the solubility and wettability of FBP in the separate and mixed HPMC/SDS solutions were also contrasted respectively. The suspensions prepared with HPMC/SDS possessed better physical stability. The suspensions were uniform when the concentration of SDS was between the critical adsorption concentration (CAC) and the polymer saturation point (PSP). After PSP, the uniformity became worse and worse until the SDS was enough to form a deflocculation state. Besides, the re-dispersion time of FBP suspensions was longest when the concentration of SDS around CAC and shorter by shorter after the critical micelle concentration (CMC). The article provided a new sight on the relation between the interaction of excipient matrix and pharmaceutical preparations.

Diffusion NMR studies of macromolecular complex formation, crowding and confinement in soft materials

Label-free methods to obtain hydrodynamic size from diffusion measurements are desirable in environments that contain multiple macromolecular species at a high total concentration: one example is the crowded cellular environment. In complex, multi-species macromolecular environments - in this article, we feature aqueous systems involving polymers, surfactants and proteins - the link between dynamics and size is harder to unpack due to macromolecular crowding and confinement. In this review, we demonstrate that the pulsed-field gradient NMR technique, with its spectral separation of different chemical components, is ideal for studying the dynamics of the entire system simultaneously and without labelling, in a wide range of systems. The simultaneous measurement of the dynamics of multiple components allows for internal consistency checks and enables quantitative statements about the link between macromolecular dynamics, size, complex formation and crowding in soft materials.

Fluorescence visualization of interactions between surfactants and polymers

An aggregation-induced emission luminescent surfactant is used to visualize the interactions between surfactants and polymers.

Interaction between Aqueous Solutions of Hydrophobically Associating Polyacrylamide and Dodecyl Dimethyl Betaine

The interaction between hydrophobically associating polyacrylamide (HAPAM) and dodecyl dimethyl betaine (BS-12) is studied through surface tension, interfacial tension (IFT), apparent viscosity, aggregation behavior, and microscopic morphologies. Results show that surface and interface properties of BS-12 are largely affected by HAPAM. BS-12 critical micelle concentrations are increased with the increment of polymer concentrations. Abilities of reduced air-water surface tension and oil-water interfacial tension are dropped. The oil-water interfacial tension to reach minimum time is increased. HAPAM can form network structures in the aqueous solution. Mixed micelles are formed by the interaction between BS-12 micelles and hydrophobic groups of HAPAM in aqueous solution and self-assembly behavior of HAPAM is affected. With the increment of surfactant concentrations, the apparent viscosity, apparent weight average molecular weights (Mw, a), root mean square radius of gyration (〈Rg〉), and hydrodynamic radius of HAPAM increase first and then decline. Moreover, microscopic morphologies of the mixed system are formed from relatively loose network structures to dense network structures and then become looser network structures and the part of network structures fracture.