Application of a novel B cell line MIN6 to a mesh-reinforced polyvinyl alcohol hydrogel tube and three-layer agarose microcapsules: an in vitro study

Emerging Nano- and Micro-Technologies Used in the Treatment of Type-1 Diabetes

Type-1 diabetes is characterized by high blood glucose levels due to a failure of insulin secretion from beta cells within pancreatic islets. Current treatment strategies consist of multiple, daily injections of insulin or transplantation of either the whole pancreas or isolated pancreatic islets. While there are different forms of insulin with tunable pharmacokinetics (fast, intermediate, and long-acting), improper dosing continues to be a major limitation often leading to complications resulting from hyper- or hypo-glycemia. Glucose-responsive insulin delivery systems, consisting of a glucose sensor connected to an insulin infusion pump, have improved dosing but they still suffer from inaccurate feedback, biofouling and poor patient compliance. Islet transplantation is a promising strategy but requires multiple donors per patient and post-transplantation islet survival is impaired by inflammation and suboptimal revascularization. This review discusses how nano- and micro-technologies, as well as tissue engineering approaches, can overcome many of these challenges and help contribute to an artificial pancreas-like system.

Immunological Issues After Stem Cell-Based β Cell Replacement

PURPOSE OF REVIEW

Islet and pancreas transplantation prove that β cell replacement can cure the glycemic derangements in type 1 diabetes (T1D). Induced pluripotent stem cells (iPSCs) can differentiate into functional insulin-producing cells, able to restore normoglycemia in diabetic animal models. iPSCs in particular can be derived from the somatic cells of a person with T1D. This review aims to clarify if it is possible to transplant autologous iPSC-derived β cells without immunosuppression or which are the alternative approaches.

RECENT FINDINGS

Several lines of evidence show that autologous iPSC and their derivatives can be immune rejected, and this immunogenicity depends on the reprogramming, the type of cells generated, the transplantation site, and the genetic/epigenetic modifications induced by reprogramming and differentiation. Besides, cell replacement in T1D should keep in consideration also the possibility of autoimmune reaction against autologous stem cell-derived β cells. Autologous iPSC-derived β cells could be immunogenic upon transplantation, eliciting both auto and allogeneic immune response. A strategy to protect cells from immune rejection is still needed. This strategy should be efficacious in protecting the grafted cells, but also avoid toxicity and the risk of tumor formation.

Preparation of cell-encapsulation devices in confined microenvironment

The entrapment of cells into hydrogel microdevice in form of microparticles or microfibers is one of the most appealing and useful tools for cell-based therapy and tissue engineering. Cell encapsulation procedures allow the immunoisolation of cells from the surrounding environment, after their transplantation and the maintenance of the normal cellular physiology. Factors affecting the efficacy of microdevices, which include size, size distribution, morphology, and porosity are all highly dependent on the method of preparation. In this respect, microfluidic based methods offer a promising strategy to fabricate highly uniform and morphologically controlled microdevices with tunable chemical and mechanical properties. In the current review, various cell microencapsulation procedures, based on a microfluidics, are critically analyzed with a special focus on the effect of the procedure on the morphology, viability and functions of the embedded cells. Moreover, a brief introduction about the optimal characteristics of microdevice intended for cell encapsulation, together with the currently used materials for the production is reported. A further challenging application of microfluidics for the development of "living microchip" is also presented. Finally, the limitations, challenging and future work on the microfluidic approach are also discussed.

Encapsulated islets transplantation: Past, present and future

Islet transplantation could become an ideal treatment for severe diabetes to prevent hypoglycemia shock and irreversible diabetic complications, once some of the major and unresolved obstacles are overcome, including limited donor supplies and side effects caused by permanent immunosuppressant use. Approximately 30 years ago, some groups succeeded in improving the blood glucose of diabetic animals by transplanting encapsulated islets with semi-permeable membranes consisting of polymer. A semi-permeable membrane protects both the inner islets from mechanical stress and the recipient's immune system (both cellular and humoral immunities), while allowing bidirectional diffusion of nutrients, oxygen, glucose, hormones and wastes, i.e., immune-isolation. This device, which enables immune-isolation, is called encapsulated islets or bio-artificial pancreas. Encapsulation with a semi-permeable membrane can provide some advantages: (1) this device protects transplanted cells from the recipient's immunity even if the xenogeneic islets (from large animals such as pig) or insulin-producing cells are derived from cells that have the potential for differentiation (some kinds of stem cells). In other words, the encapsulation technique can resolve the problem of limited donor supplies; and (2) encapsulation can reduce or prevent chronic administration of immunosuppressants and, therefore, important side effects otherwise induced by immunosuppressants. And now, many novel encapsulated islet systems have been developed and are being prepared for testing in a clinical setting.

The effects of cell density and device arrangement on the behavior of macroencapsulated beta-cells

Over the last several decades, considerable research has focused on the development of cell encapsulation technology to treat a number of diseases, especially type 1 diabetes. One of the key advantages of cell encapsulation is that it permits the use of xenogenic tissue, particularly animal-derived cell lines. This is an attractive idea, because it circumvents the issue of a limited human organ supply. Furthermore, as opposed to whole islets, cell lines have a better proliferative capacity and can easily be amplified in culture to provide an endless supply of uniform cells. We have previously described a macroencapsulation device for the immunoisolation of insulin-secreting 1-cells. The aim of this work was to optimize the viability and insulin secretion of cells encapsulated within this device. Specifically, the effects of cell packing density and device membrane configuration were investigated. The results indicated that cell density plays an important role in the secretory capacity of the cells, with higher cell density leading to increased insulin secretion. Increasing the transport area of the capsule by modifying the membrane configuration also led to an improvement in the insulin output of the device.

Hydrogels for tissue engineering and delivery of tissue-inducing substances

This manuscript presents hydrogels (HGs) from a tissue engineering perspective being especially written for those who are approaching this field by offering a concise but inclusive review of hydrogel synthesis, properties, characterization methods, and applications.

Preparation of uniform-sized agarose beads by microporous membrane emulsification technique

Uniform-sized agarose beads were prepared by membrane emulsification technique in this study. Agarose was dissolved in boiling water (containing 0.9% sodium chloride) and used as water phase. A mixture of liquid paraffin and petroleum ether containing 4 wt% of hexaglycerin penta ester (PO-500) emulsifier was used as oil phase. At 55 degrees C, the water phase permeated through uniform pores of microporous membrane into the oil phase by a pressure of nitrogen gas to form uniform W/O emulsion. Then the emulsion was cooled down to room temperature under gentle agitation to form gel beads. The effect of oil phase, emulsifier, especially temperature on the uniformity of the beads were investigated and interpreted from interfacial tension between water phase and oil phase. Under optimized condition, the coefficient variation (C.V.) showing the size distribution of the beads was under 15%. This was the first report to prepare uniform agarose beads by membrane emulsification, and to investigate the effect of temperature on the size distribution of the droplets and beads. The beads with different size can be prepared by using membranes with different pore size, and the result showed that there was a linear relationship between the average diameter of beads and pore size of the membranes; beads with diameter from 15 to 60 microm were able to obtain in this study.

Effect of rat-to-mouse bioartificial pancreas xenotransplantation on diabetic renal damage and survival

OBJECTIVE

Diabetic nephropathy is a life-threatening complication of diabetes mellitus. Bioartificial pancreas transplantation is becoming a therapeutic option for diabetes mellitus as it protects both allogeneic and xenogeneic islets from the host immune system. This study was undertaken to determine the effectiveness of bioartificial pancreas transplantation to improve or prevent diabetic renal damage.

METHODS

Approximately 800 rat islets were macroencapsulated in polyvinyl alcohol gel and then transplanted into the peritoneal cavity of diabetic mice (transplantation group [Tx group]). Diabetic mice transplanted with a capsule without islets served as a sham operation group. After transplantation, the following data were collected: survival, body weight, blood glucose, blood urea nitrogen, serum creatinine levels, urinalysis, water intake, and histological changes in the kidney.

RESULTS

There was a significant improvement in survival, blood glucose, blood urea nitrogen, and creatinine in the Tx group compared with the sham operation group. No remarkable changes were seen in urinary parameters between the 2 groups, and there was also no significant difference in water intake. Histological examination revealed that mesangial matrix expansion was decreased in the Tx group.

CONCLUSIONS

This study demonstrated that polyvinyl alcohol gel bioartificial pancreas transplantation can protect the kidney from diabetic damage.

Immobilization of Arg-Gly-Asp (RGD) sequence in a thermosensitive hydrogel for cell delivery using pheochromocytoma cells (PC12)

A copolymer of N-isopropylacrylamide (98 mole% in the feed) and acrylic acid poly(N-isopropylacrylamide-co-acrylic acid) [p(NiPAAm-co-AAc)], and the adhesion molecule, an Arg-Gly-Asp (RGD)-incorporated hydrogel, were used to entrap pheochromocytoma cells (PC12). In a 28-d culture period, the PC12 cells in the RGD-conjugated gel maintained higher viability and produced dopamine at constant rates, while there was lower cell viability and less dopamine secretion by PC12 cells in p(NiPAAm-co-AAc). PC12 cells cultured in the RGD-conjugated gel would constitute a potentially useful three-dimensional cell system for application in nerve regeneration.

In vitro and in vivo evaluation of alginate/sol-gel synthesized aminopropyl-silicate/alginate membrane for bioartificial pancreas

Alginate/aminopropyl-silicate/alginate (Alg/AS/Alg) membrane was prepared on Ca-alginate gel beads by a sol-gel process. The membrane has identical to Si-O-Si identical to bonds as well as electrostatic bonds between amino groups of AS and carboxyl groups of alginate. Permeability and stability were investigated for the membrane. Furthermore, rat islets encapsulated in the membrane (499 +/- 32 microns in diameter, 1000 islets/recipient) were transplanted to the peritoneal cavities of the mice with streptozotocin-induced diabetes. Our data show that the membrane had the molecular weight cut-off point of between 70 and 150 kDa, and hardly inhibited the permeation of glucose and insulin. The Alg/AS/Alg microcapsule was more stable than the well-known Alg/poly-L-lysine (PLL)/Alg microcapsule. After 30 days of soaking in stimulated body fluid, the percentages of intact microcapsule were 98.4 +/- 0.5 (mean +/- SEM)% and 88.0 +/- 1.5% (p < 0.001) for the Alg/AS/Alg and Alg/PLL/Alg microcapsules, respectively. The maximum maintenance period of normoglycemia was 105 days without administration of immunosuppressive drugs.

Adenovirus-mediated insulin gene transfer improves nutritional and post-hepatectomized conditions in diabetic rats

BACKGROUND

Impaired nutritional conditions in patients with diabetes are significant risk factors after major abdominal surgery. We constructed recombinant adenovirus vector carrying the human insulin gene (AxCAIns) for in vivo insulin gene transfer to improve metabolic impairments after a major operation in patients with diabetes. We tested the effects of AxCAIns on nutritional and post-hepatectomized conditions in rats with diabetes treated with streptozotocin (STZ).

METHODS

AxCAIns was injected into the spleen in diabetic rats treated with STZ. Blood levels of glucose, total protein, albumin, and C-peptide of human proinsulin were measured and the expression of transferred human insulin gene was analyzed in various organs. Diabetic rats underwent 70% partial hepatectomy with or without AxCAIns injection, and post-hepatectomized conditions were analyzed.

RESULTS

STZ-induced hyperglycemia was reduced by AxCAIns injection. Decreased serum levels of total protein and albumin in diabetic rats were significantly restored to normal levels by AxCAIns injection, and human C-peptide was detected in the sera of AxCAIns-treated rats. Human preproinsulin messenger RNA, which represented the expression of transferred insulin gene, was detected in the liver and the spleen, but not in other organs. Serum albumin levels, remnant liver weight, and ratios of postoperative body weight to preoperative body weight were significantly increased by AxCAIns in hepatectomized diabetic rats.

CONCLUSIONS

AxCAIns injection to the spleen efficiently transferred the human insulin gene mainly into the hepatocytes and produced enough human proinsulin to improve nutritional impairments and post-hepatectomized conditions in diabetic rats. Insulin gene transfer with intrasplenic injection of AxCAIns may be available to improve metabolic impairment after major abdominal surgery in patients with diabetes.

Dose control with cell lines used for encapsulated cell therapy

Cell therapy-use of cells to deliver active factors-is an emerging technique in treatment of neurodegenerative disease. Successful devices maintain cell viability and functionality over extended implant periods. Use of dividing cell lines to deliver therapeutic factors has been studied extensively. One emerging issue is the tendency of cells to continue proliferation within the intracapsular environment-potentially outstripping nutrient supply. This work presents a method of controlling proliferation and delivering therapeutic molecules within a dose range. The method entails encapsulation into a hollow fiber device of discrete numbers of cell-containing microcarriers. Proliferation control is attained by embedding cell-containing microcarriers in nonmitogenic hydrogels. PC-12 cells secreting L-dopa and dopamine was the model cell line tested. Feasibility of the method in controlling growth of normally rapidly dividing cells in the intracapsular environment was demonstrated in vitro and in vivo. Control nonmicrocarrier PC-12 cell devices had approximately fourfold greater expansion in cell number compared to experimental microcarrier-containing devices over 4 weeks in vitro and in vivo after implant into rat striatum. Ability to control dose released over a several-fold range was demonstrated with encapsulated PC-12 cells delivering neurotransmitters and C2C12 mouse myoblast cells delivering neurotrophic factors (CNTF).

Materials for immunoisolated cell transplantation

Encapsulated cell therapy provides site-specific continuous delivery of cell-synthesized molecules. Cell encapsulation therapy is based on the concept of immunoisolation. Foreign cells are surrounded with a semi-permeable membrane prior to transplantation to shield them from the host's natural defense system. This membrane is selectively permeable to transport of nutrients and therapeutic agents but relatively impermeable to larger molecules and cells of the hosts' immune system. Most encapsulation devices also utilize an internal matrix to keep cells suspended within the capsule. Proper choice of materials and materials processing techniques to formulate membrane and matrix components is essential to the success of these devices. A successful encapsulation device recreates the natural three-dimensional tissue environment that supports cell function and maintains cell viability. This review summarizes recent developments in materials development for cell encapsulation devices and highlights some ongoing challenges faced by those in the field.