A novel RNA motif for neomycin recognition

Multiplex electrochemical aptasensor for the simultaneous detection of linomycin and neomycin antibiotics

The escalating use of antibiotics across diverse sectors, including human healthcare, agriculture, and livestock, has led to their pervasive presence in the environment, raising concerns about their impact on ecosystems and human health. Traditional detection methods, reliant on high-performance liquid chromatography and immuno-assays, face challenges of complexity, cross-reactivity, and limited specificity. Aptamer-based biosensors offer a promising alternative, leveraging the specificity, stability, and cost-effectiveness of aptamers. Herein, we present a novel dual-screen-printed carbon electrode (SPCE) biosensor, modified with a nanocomposite of gold nanoparticles (AuNPs) and carbon nanofibers (CNFs), for the label-free electrochemical detection of lincomycin and neomycin antibiotics. Lincomycin and neomycin, two antibiotics of environmental concern due to their widespread usage and potential ecological impact, were simultaneously detected using square wave voltammetry. The aptasensors showed high sensitivity with detection limits of 0.02 pg/mL and 0.035 pg/mL for lincomycin and neomycin, respectively. The developed biosensor exhibited high selectivity and reproducibility in detecting both antibiotics. This multiplex biosensing platform offers a promising strategy for efficient and cost-effective monitoring of antibiotic residues in environmental samples, addressing the critical need for robust detection methods in environmental monitoring and public health surveillance.

Investigating the Intramolecular Competition of Different RNA Binding Motifs for Neomycin B by Native Top-Down Mass Spectrometry

The ongoing search for small molecule drugs that target ribonucleic acids (RNA) is complicated by a limited understanding of the principles that govern RNA-small molecule interactions. Here we have used stoichiometry-resolved native top-down mass spectrometry (MS) to study the binding of neomycin B to small model hairpin RNAs, an unstructured RNA, and a viral RNA construct. For 15-22 nt model RNAs with hairpin structure, we found that neomycin B binding to hairpin loops relies on interactions with both the nucleobases and the 2'-OH groups, and that a simple 5' or 3' overhang can introduce an additional binding motif. For a 47 nt RNA construct derived from stem IA of the human immunodeficiency virus 1 (HIV-1) rev response element (RRE) RNA, native top-down MS identified four different binding motifs, of which the purine-rich internal loop showed the highest affinity for neomycin B. Stoichiometry-resolved binding site mapping by native top-down MS allows for a new perspective on binding specificity, and has the potential to reveal unexpected principles of small molecule binding to RNA.

Advances of aptamer-based small-molecules sensors in body fluids detection

The field of aptamer-based sensing has evolved considerably over the past three decades. The aptamer sensor-based detection of small-molecule targets in body fluids is designed for real-time or rapid, low-cost, non- or minimally invasive tracking and diagnosis of human health status. It can be achieved by specifically monitoring biomarkers or metabolites excreted from various body fluids, including blood, urine, cerebrospinal fluid, saliva, ect. This article reviews a comprehensive collection of aptamer-based sensors for detecting small-molecule in various body fluids. A comparative analysis of aptamer features, emerging chemistry, advanced sensing materials, transduction techniques, and detection performance is conducted, and the strengths and pitfalls of each approach are discussed. Finally, the development process and application challenges of aptamer-based sensors in the detection of small-molecule in body fluids are presented and discussed.

Development of a novel tobramycin dependent riboswitch

We herein report the selection and characterization of a new riboswitch dependent on the aminoglycoside tobramycin. Its dynamic range rivals even the tetracycline dependent riboswitch to be the current best performing, synthetic riboswitch that controls translation initiation. The riboswitch was selected with RNA Capture-SELEX, a method that not only selects for binding but also for structural changes in aptamers on binding. This study demonstrates how this method can fundamentally reduce the labour required for the de novo identification of synthetic riboswitches. The initially selected riboswitch candidate harbours two distinct tobramycin binding sites with KDs of 1.1 nM and 2.4 μM, respectively, and can distinguish between tobramycin and the closely related compounds kanamycin A and B. Using detailed genetic and biochemical analyses and 1H NMR spectroscopy, the proposed secondary structure of the riboswitch was verified and the tobramycin binding sites were characterized. The two binding sites were found to be essentially non-overlapping, allowing for a separate investigation of their contribution to the activity of the riboswitch. We thereby found that only the high-affinity binding site was responsible for regulatory activity, which allowed us to engineer a riboswitch from only this site with a minimal sequence size of 33 nt and outstanding performance.

Discovery of Aptamers and the Acceleration of the Development of Targeting Research in Ophthalmology

Aptamers are widely applied to diagnosis and therapy because of their targeting. However, the current progress of research into aptamers for the treatment of eye disorders has not been well-documented. The current literature on aptamers was reviewed in this study. Aptamer-related drugs and biochemical sensors have been evaluated for several eye disorders within the past decade; S58 targeting TGF-β receptor II and pegaptanib targeting vascular endothelial growth factor (VEGF) are used to prevent fibrosis after glaucoma filtration surgery. Anti-brain-derived neurotrophic factor aptamer has been used to diagnose glaucoma. The first approved aptamer drug (pegaptanib) has been used to inhibit angiogenesis in age-related macular degeneration (AMD) and diabetic retinopathy (DR), and its efficacy and safety have been demonstrated in clinical trials. Aptamers, including E10030, RBM-007, AS1411, and avacincaptad pegol, targeting other angiogenesis-related biomarkers have also been discovered and subjected to clinical trials. Aptamers, such as C promoter binding factor 1, CD44, and advanced end products in AMD and DR, targeting other signal pathway proteins have also been discovered for therapy, and biochemical sensors for early diagnosis have been developed based on aptamers targeting VEGF, connective tissue growth factor, and lipocalin 1. Aptamers used for early detection and treatment of ocular tumors were derived from other disease biomarkers, such as CD71, nucleolin, and high mobility group A. In this review, the development and application of aptamers in eye disorders in recent years are systematically discussed, which may inspire a new link between aptamers and eye disorders. The aptamer development trajectory also facilitates the discovery of the pathogenesis and therapeutic strategies for various eye disorders.

Aptamer Sensors for the Detection of Antibiotic Residues- A Mini-Review

Food security is a global issue, since it is closely related to human health. Antibiotics play a significant role in animal husbandry owing to their desirable broad-spectrum antibacterial activity. However, irrational use of antibiotics has caused serious environmental pollution and food safety problems; thus, the on-site detection of antibiotics is in high demand in environmental analysis and food safety assessment. Aptamer-based sensors are simple to use, accurate, inexpensive, selective, and are suitable for detecting antibiotics for environmental and food safety analysis. This review summarizes the recent advances in aptamer-based electrochemical, fluorescent, and colorimetric sensors for antibiotics detection. The review focuses on the detection principles of different aptamer sensors and recent achievements in developing electrochemical, fluorescent, and colorimetric aptamer sensors. The advantages and disadvantages of different sensors, current challenges, and future trends of aptamer-based sensors are also discussed.

Genome-wide identification of Kanamycin B binding RNA in Escherichia coli

BACKGROUND

The aminoglycosides are established antibiotics that inhibit bacterial protein synthesis by binding to ribosomal RNA. Additional non-antibiotic aminoglycoside cellular functions have also been identified through aminoglycoside interactions with cellular RNAs. The full extent, however, of genome-wide aminoglycoside RNA interactions in Escherichia coli has not been determined. Here, we report genome-wide identification and verification of the aminoglycoside Kanamycin B binding to Escherichia coli RNAs. Immobilized Kanamycin B beads in pull-down assays were used for transcriptome-profiling analysis (RNA-seq).

RESULTS

Over two hundred Kanamycin B binding RNAs were identified. Functional classification analysis of the RNA sequence related genes revealed a wide range of cellular functions. Small RNA fragments (ncRNA, tRNA and rRNA) or small mRNA was used to verify the binding with Kanamycin B in vitro. Kanamycin B and ibsC mRNA was analysed by chemical probing.

CONCLUSIONS

The results will provide biochemical evidence and understanding of potential extra-antibiotic cellular functions of aminoglycosides in Escherichia coli.

Structural changes in aptamers are essential for synthetic riboswitch engineering

Synthetic riboswitches are powerful tools in synthetic biology in which sensing and execution are consolidated in a single RNA molecule. By using SELEX to select aptamers in vitro, synthetic riboswitches can in theory be engineered against any ligand of choice. Surprisingly, very few in vitro selected aptamers have been used for the engineering of synthetic riboswitches. In-depth studies of these aptamers suggest that the key characteristics of such regulatory active RNAs are their structural switching abilities and their binding dynamics. Conventional SELEX approaches seem to be inadequate to select for these characteristics, which may explain the lack of in vitro selected aptamers suited for engineering of synthetic riboswitches. In this review, we explore the functional principles of synthetic riboswitches, identify key characteristics of regulatory active in vitro selected aptamers and integrate these findings in context with available in vitro selection methods. Based on these insights, we propose to use a combination of capture-SELEX and subsequent functional screening for a more successful in vitro selection of aptamers that can be applied for the engineering of synthetic riboswitches.

Advances and Challenges in Small-Molecule DNA Aptamer Isolation, Characterization, and Sensor Development

Aptamers are short oligonucleotides isolated in vitro from randomized libraries that can bind to specific molecules with high affinity, and offer a number of advantages relative to antibodies as biorecognition elements in biosensors. However, it remains difficult and labor-intensive to develop aptamer-based sensors for small-molecule detection. Here, we review the challenges and advances in the isolation and characterization of small-molecule-binding DNA aptamers and their use in sensors. First, we discuss in vitro methodologies for the isolation of aptamers, and provide guidance on selecting the appropriate strategy for generating aptamers with optimal binding properties for a given application. We next examine techniques for characterizing aptamer-target binding and structure. Afterwards, we discuss various small-molecule sensing platforms based on original or engineered aptamers, and their detection applications. Finally, we conclude with a general workflow to develop aptamer-based small-molecule sensors for real-world applications.

Recent advances in aptamer-based sensors for aminoglycoside antibiotics detection and their applications

Aminoglycoside antibiotics (AAs) have been extensively applied in medical field and animal husbandry owing to desirable broad-spectrum antibacterial activity. Excessive AAs residues in the environment can be accumulated in human body through food chain and cause detrimental effect on human health. The establishment of highly specific, simple and sensitive detection methods for monitoring AAs residues is highly in demand. Aptasensor using aptamer as the biological recognition element is the efficient and promising sensing method for detection of AAs. In this review, we have made a summary of specific aptamers sequences against AAs. Subsequently, we provide a systematical and comprehensive overview of modern techniques in aptasensors for detection of AAs according to optical aptasensors as well as electrochemical aptasensors and further summarize their advantages and disadvantages to compare their applications. In addition, we present an overview of practical applications of aptasensors in sample detection of AAs. Moreover, the current challenges and future trends in this field are also included to reveal a promising perspective for developing novel aptasensors for AAs.

Aptamer protective groups tolerate different reagents and reactions for regioselective modification of neomycin B

The aptameric protective group strategy for the one-step regioselective transformation of aminoglycoside antibiotics was found to be compatible with diverse reagents and reaction conditions. New derivatives of neomycin B were synthesized with regioselectivities of >99%. This result extends the scope of applicability of APGs facilitating access to novel aminoglycoside derivatives.

Predicting Future Prospects of Aptamers in Field-Effect Transistor Biosensors

Aptamers, in sensing technology, are famous for their role as receptors in versatile applications due to their high specificity and selectivity to a wide range of targets including proteins, small molecules, oligonucleotides, metal ions, viruses, and cells. The outburst of field-effect transistors provides a label-free detection and ultra-sensitive technique with significantly improved results in terms of detection of substances. However, their combination in this field is challenged by several factors. Recent advances in the discovery of aptamers and studies of Field-Effect Transistor (FET) aptasensors overcome these limitations and potentially expand the dominance of aptamers in the biosensor market.

Structure of an RNA aptamer in complex with the fluorophore tetramethylrhodamine

RNA aptamers-artificially created RNAs with high affinity and selectivity for their target ligand generated from random sequence pools-are versatile tools in the fields of biotechnology and medicine. On a more fundamental level, they also further our general understanding of RNA-ligand interactions e. g. in regard to the relationship between structural complexity and ligand affinity and specificity, RNA structure and RNA folding. Detailed structural knowledge on a wide range of aptamer-ligand complexes is required to further our understanding of RNA-ligand interactions. Here, we present the atomic resolution structure of an RNA-aptamer binding to the fluorescent xanthene dye tetramethylrhodamine. The high resolution structure, solved by NMR-spectroscopy in solution, reveals binding features both common and different from the binding mode of other aptamers with affinity for ligands carrying planar aromatic ring systems such as the malachite green aptamer which binds to the tetramethylrhodamine related dye malachite green or the flavin mononucleotide aptamer.

Common Secondary and Tertiary Structural Features of Aptamer-Ligand Interaction Shared by RNA Aptamers with Different Primary Sequences

Aptamer selection can yield many oligonucleotides with different sequences and affinities for the target molecule. Here, we have combined computational and experimental approaches to understand if aptamers with different sequences but the same molecular target share structural and dynamical features. NEO1A, with a known NMR-solved structure, displays a flexible loop that interacts differently with individual aminoglycosides, its ligand affinities and specificities are responsive to ionic strength, and it possesses an adenosine in the loop that is critical for high-affinity ligand binding. NEO2A was obtained from the same selection and, although they are only 43% identical in overall sequence, NEO1A and NEO2A share similar loop sequences. Experimental analysis by 1D NMR and 2-aminopurine reporters combined with molecular dynamics modeling revealed similar structural and dynamical characteristics in both aptamers. These results are consistent with the hypothesis that the target ligand drives aptamer structure and also selects relevant dynamical characteristics for high-affinity aptamer-ligand interaction. Furthermore, they suggest that it might be possible to “migrate” structural and dynamical features between aptamer group members with different primary sequences but with the same target ligand.

Aptamers in RNA-based switches of gene expression

The ability to control gene expression via small molecule effectors is important in basic research as well as in future gene therapy applications. Although transcription factor-based systems are widely used, they are not well suited for certain applications due to a lack of functionality, limited available coding space, and potential immunogenicity of the regulatory proteins. RNA-based switches fill this gap since they can be designed to respond to effector compounds utilizing ligand-sensing aptamers. These systems are very modular since the aptamer can be combined with a variety of different expression platforms. RNA-based switches have been constructed that allow for controlling gene expression in diverse contexts. Here we discuss latest developments and applications of aptamer-based gene expression switches in eukaryotes.

Systematic Evaluation of Genetic and Environmental Factors Affecting Performance of Translational Riboswitches

Since their discovery, riboswitches have been attractive tools for the user-controlled regulation of gene expression in bacterial systems. Riboswitches facilitate small molecule mediated fine-tuning of protein expression, making these tools of great use to the synthetic biology community. However, the use of riboswitches is often restricted due to context dependent performance and limited dynamic range. Here, we report the drastic improvement of a previously developed orthogonal riboswitch achieved through in vivo functional selection and optimization of flanking coding and noncoding sequences. The behavior of the derived riboswitches was mapped under a wide array of growth and induction conditions, using a structured Design of Experiments approach. This approach successfully improved the maximal protein expression levels 8.2-fold relative to the original riboswitches, and the dynamic range was improved to afford riboswitch dependent control of 80-fold. The optimized orthogonal riboswitch was then integrated downstream of four endogenous stress promoters, responsive to phosphate starvation, hyperosmotic stress, redox stress, and carbon starvation. These responsive stress promoter-riboswitch devices were demonstrated to allow for tuning of protein expression up to ∼650-fold in response to both environmental and cellular stress responses and riboswitch dependent attenuation. We envisage that these riboswitch stress responsive devices will be useful tools for the construction of advanced genetic circuits, bioprocessing, and protein expression.

RNA-based Capture-SELEX for the selection of small molecule-binding aptamers

Despite their wide applicability, the selection of small molecule-binding RNA aptamers with both high affinity binding and specificity is still challenging. Aptamers that excel at both binding and structure switching are particularly rare and difficult to find. Here, we present the protocol of a Capture-SELEX that specifically allows the in vitro selection of small-molecule binding aptamers, which are essential building blocks for the design process of synthetic riboswitches and biosensors. Moreover, we provide a comparative overview of our proposed methodology versus alternative in vitro selection protocols with a special focus on the design of the pool. Finally, we have included detailed notes to point out useful tips and pitfalls for future application.

Aptamer-Based Biosensors for Antibiotic Detection: A Review

Antibiotic resistance and, accordingly, their pollution because of uncontrolled usage has emerged as a serious problem in recent years. Hence, there is an increased demand to develop robust, easy, and sensitive methods for rapid evaluation of antibiotics and their residues. Among different analytical methods, the aptamer-based biosensors (aptasensors) have attracted considerable attention because of good selectivity, specificity, and sensitivity. This review gives an overview about recently-developed aptasensors for antibiotic detection. The use of various aptamer assays to determine different groups of antibiotics, like β-lactams, aminoglycosides, anthracyclines, chloramphenicol, (fluoro)quinolones, lincosamide, tetracyclines, and sulfonamides are presented in this paper.

Eukaryotic Ribosomal Expansion Segments as Antimicrobial Targets

Diversity in eukaryotic rRNA structure and function offers possibilities of therapeutic targets. Unlike ribosomes of prokaryotes, eukaryotic ribosomes contain species-specific rRNA expansion segments (ESs) with idiosyncratic structures and functions that are essential and specific to some organisms. Here we investigate expansion segment 7 (ES7), one of the largest and most variable expansions of the eukaryotic ribosome. We hypothesize that ES7 of the pathogenic fungi Candida albicans (ES7_CA) could be a prototypic drug target. We show that isolated ES7_CA folds reversibly to a native-like state. We developed a fluorescence displacement assay using an RNA binding fluorescent probe, F-neo. F-neo binds tightly to ES7_CA with a K_d of 2.5 × 10^-9 M but binds weakly to ES7 of humans (ES7_HS) with a K_d estimated to be greater than 7 μM. The fluorescence displacement assay was used to investigate the affinities of a library of peptidic aminosugar conjugates (PAs) for ES7_CA. For conjugates with highest affinities for ES7_CA (NeoRH, NeoFH, and NeoYH), the lowest dose needed to induce mortality in C. albicans (minimum inhibitory concentration, MIC) was determined. PAs with the lowest MIC values were tested for cytotoxicity in HEK293T cells. Molecules with high affinity for ES7_CA in vitro induce mortality in C. albicans but not in HEK293T cells. The results are consistent with the hypothesis that ESs represent useful targets for chemotherapeutics directed against eukaryotic pathogens.

Synthetic Riboswitches: From Plug and Pray toward Plug and Play

In synthetic biology, metabolic engineering, and gene therapy, there is a strong demand for orthogonal or externally controlled regulation of gene expression. Here, RNA-based regulatory devices represent a promising emerging alternative to proteins, allowing a fast and direct control of gene expression, as no synthesis of regulatory proteins is required. Besides programmable ribozyme elements controlling mRNA stability, regulatory RNA structures in untranslated regions are highly interesting for engineering approaches. Riboswitches are especially well suited, as they show a modular composition of sensor and response elements, allowing a free combination of different modules in a plug-and-play-like mode. The sensor or aptamer domain specifically interacts with a trigger molecule as a ligand, modulating the activity of the adjacent response domain that controls the expression of the genes located downstream, in most cases at the level of transcription or translation. In this review, we discuss the recent advances and strategies for designing such synthetic riboswitches based on natural or artificial components and readout systems, from trial-and-error approaches to rational design strategies. As the past several years have shown dramatic development in this fascinating field of research, we can give only a limited overview of the basic riboswitch design principles that is far from complete, and we apologize for not being able to consider every successful and interesting approach described in the literature.

Automated Selection of Aminoglycoside Aptamers

The in vitro selection of aptamers that bind to low molecular weight targets is commonly a tedious, time-consuming project. We have expanded current automated selection protocols to include aptamer selections against small molecules including the aminoglycosides neomycin, kanamycin, and tobramycin. This modified procedure decreases both the frequency of manual handling of the selection reagents and the time required to perform the experiment, generating aptamers against the chosen target at a much greater rate. Using this process, we have selected aptamers of good affinity against all three aminoglycosides chosen. The method is suitable for integration with high-throughput technologies, greatly expanding the possibility of discovering useful aptamers against other low weight targets. (JALA 2004;9:150-4)

MIPs and Aptamers for Recognition of Proteins in Biomimetic Sensing

Biomimetic binders and catalysts have been generated in order to substitute the biological pendants in separation techniques and bioanalysis. The two major approaches use either "evolution in the test tube" of nucleotides for the preparation of aptamers or total chemical synthesis for molecularly imprinted polymers (MIPs). The reproducible production of aptamers is a clear advantage, whilst the preparation of MIPs typically leads to a population of polymers with different binding sites. The realization of binding sites in the total bulk of the MIPs results in a higher binding capacity, however, on the expense of the accessibility and exchange rate. Furthermore, the readout of the bound analyte is easier for aptamers since the integration of signal generating labels is well established. On the other hand, the overall negative charge of the nucleotides makes aptamers prone to non-specific adsorption of positively charged constituents of the sample and the "biological" degradation of non-modified aptamers and ionic strength-dependent changes of conformation may be challenging in some application.

In vitro selection of antibiotic-binding aptamers

Despite its wide applicability the selection of small molecule-binding RNA aptamers with high affinity binding and specificity is still challenging. We will present here a protocol which allows the in vitro selection of antibiotic-binding aptamers which turned out to be important building blocks for the design process of synthetic riboswitches. The presented methods will be compared with alternative in vitro selection protocols. A detailed note section will point out useful tips and pitfalls.

Aptamers in analytics

Nucleic acid aptamers are promising alternatives to antibodies in analytics. They are generally obtained through an iterative SELEX protocol that enriches a population of synthetic oligonucleotides to a subset that can recognize the chosen target molecule specifically and avidly. A wide range of targets is recognized by aptamers. Once identified and optimized for performance, aptamers can be reproducibly synthesized and offer other key features, like small size, low cost, sensitivity, specificity, rapid response, stability, and reusability. This makes them excellent options for sensory units in a variety of analytical platforms including those with electrochemical, optical, and mass sensitive transduction detection. Many novel sensing strategies have been developed by rational design to take advantage of the tendency of aptamers to undergo conformational changes upon target/analyte binding and employing the principles of base complementarity that can drive the nucleic acid structure. Despite their many advantages over antibodies, surprisingly few aptamers have yet been integrated into commercially available analytical devices. In this review, we discuss how to select and engineer aptamers for their identified application(s), some of the challenges faced in developing aptamers for analytics and many examples of their reported successful performance as sensors in a variety of analytical platforms.

A self-assembling RNA aptamer-based nanoparticle sensor for fluorometric detection of Neomycin B in milk

To date, there are few reports regarding the development of RNA aptamer-based biosensors for the detection of small molecules. The possible reason is attributed to the weak nuclease resistance of RNA in biological environments. In this study, we have developed an RNA aptamer-based gold nanoparticle (AuNP) sensor for fluorometric detection of Neomycin B in milk. This aptasensor depends on the self-assembly of the RNA aptamer/Neomycin B complex and fluorescence quenching by AuNPs. This biosensor exhibited a low detection limit of 0.01 μM, with a linear dynamic range from 0.1 to 10 μM in milk, and a good selectivity toward Neomycin B. Specifically, because of the shorter RNA fragments and the nuclease inhibition ability of the RNA-modified AuNPs, the RNA sequences remained stable during the experiments. This work will serve as an example for the development of novel biosensors based on RNA aptamers. Graphical Abstract An RNA aptamer-based nanoparticle sensor, developed for the detection of Neomycin B in milk, shows high binding affinity and selectivity. This aptasensor depends on the self-assembly of the aptamer/ligand complex and fluorescence quenching by gold nanoparticles (AuNPs). Because of the shorter RNA fragments and the nuclease inhibition ability of RNA-modified AuNPs, RNA sequences remain stable during the detection.

Identification of RNA aptamers with riboswitching properties

During the past years customized gene network design has become of tremendous interest among various disciplines in life science. The identification of artificial genetic elements sensitive to internal or external stimuli constitutes the foundation for the design and realization of conditional gene expression systems. Typically, strategies involving selection or screening steps are employed alongside approaches focusing on rational design to select for the desired functionality of a given element. Here we present a fluorescence-based in vivo screening approach that combines an initial in vitro selection with subsequent extensive screening steps and a final rational design to identify RNA based regulators in baker's yeast. These artificial RNA regulators, termed synthetic riboswitches, are derived from RNA aptamers. Our method allows for the separation of aptamers featuring the potential to be transformed into a riboswitch from those inherently unable to confer control over gene expression. The system may be applied to virtually all existing aptamer-ligand pairs and as such presents a powerful means to enhance the setup of switchable genetic circuits.

RNA aptamers as genetic control devices: the potential of riboswitches as synthetic elements for regulating gene expression

RNA utilizes many different mechanisms to control gene expression. Among the regulatory elements that respond to external stimuli, riboswitches are a prominent and elegant example. They consist solely of RNA and couple binding of a small molecule ligand to the so-called "aptamer domain" with a conformational change in the downstream "expression platform" which then determines system output. The modular organization of riboswitches and the relative ease with which ligand-binding RNA aptamers can be selected in vitro against almost any molecule have led to the rapid and widespread adoption of engineered riboswitches as artificial genetic control devices in biotechnology and synthetic biology over the past decade. This review highlights proof-of-principle applications to demonstrate the versatility and robustness of engineered riboswitches in regulating gene expression in pro- and eukaryotes. It then focuses on strategies and parameters to identify aptamers that can be integrated into synthetic riboswitches that are functional in vivo, before finishing with a reflection on how to improve the regulatory properties of engineered riboswitches, so that we can not only further expand riboswitch applicability, but also finally fully exploit their potential as control elements in regulating gene expression.

Potent inhibition of miR-27a by neomycin-bisbenzimidazole conjugates

miRNAs are important components of regulatory networks that control gene expression and have implications in various diseases including cancer. Targeting oncogenic miRNAs with small molecules is currently being explored to develop cancer therapeutics. Here, we report the development of dual binding neomycin-bisbenzimidazole conjugates that target oncogenic miR-27a with high affinity (Ka = 1.2 to 7.4 × 108 M-1). These conjugates bring significant reduction (∼65% at 5 μM) in mature miRNA levels and penetrate easily in the cells where they localise both in the cytoplasm and the nucleus. Cell cycle analysis showed significant increase in the G0/G1 phase (∼15%) and decrease in the S phase (∼7%) upon treatment with neomycin-bisbenzimidazole conjugates, suggesting inhibition of cell proliferation. Using the conjugation approach, we show that moderately binding ligands can be covalently combined into high affinity binders. This study also highlights the role of linker optimization in designing high affinity ligands for miR-27a targeting.

Optimization of Experimental Parameters to Explore Small-Ligand/Aptamer Interactions through Use of (1) H NMR Spectroscopy and Molecular Modeling

Aptamers constitute an emerging class of molecules designed and selected to recognize any given target that ranges from small compounds to large biomolecules, and even cells. However, the underlying physicochemical principles that govern the ligand-binding process still have to be clarified. A major issue when dealing with short oligonucleotides is their intrinsic flexibility that renders their active conformation highly sensitive to experimental conditions. To overcome this problem and determine the best experimental parameters, an approach based on the design-of-experiments methodology has been developed. Here, the focus is on DNA aptamers that possess high specificity and affinity for small molecules, L-tyrosinamide, and adenosine monophosphate. Factors such as buffer, pH value, ionic strength, Mg(2+) -ion concentration, and ligand/aptamer ratio have been considered to find the optimal experimental conditions. It was then possible to gain new insight into the conformational features of the two ligands by using ligand-observed NMR spectroscopic techniques and molecular mechanics.

Aptamers and SELEX in Chemistry & Biology

Nucleic acid aptamers, or simply aptamers, are oligonucleotides that bind specific ligands that vary from small molecules to proteins. An aptamer for a specific ligand is routinely identified through the process of systematic evolution of ligands by exponential enrichment, although some aptamers are found in nature as ligand-binding sites of special RNA structures called riboswitches. Aptamers have significant value in biotechnology and for the development of aptamer-based therapeutics. This perspective briefly highlights the tight connection between the journal Chemistry & Biology and in vitro selection technologies over the past two decades. We then focus our discussion on the summary of the current state of the art of aptamer technologies and provide our view of the future challenges and opportunities for the field.

Ribozyme-based aminoglycoside switches of gene expression engineered by genetic selection in S. cerevisiae

Systems for conditional gene expression are powerful tools in basic research as well as in biotechnology. For future applications, it is of great importance to engineer orthogonal genetic switches that function reliably in diverse contexts. RNA-based switches have the advantage that effector molecules interact immediately with regulatory modules inserted into the target RNAs, getting rid of the need of transcription factors usually mediating genetic control. Artificial riboswitches are characterized by their simplicity and small size accompanied by a high degree of modularity. We have recently reported a series of hammerhead ribozyme-based artificial riboswitches that allow for post-transcriptional regulation of gene expression via switching mRNA, tRNA, or rRNA functions. A more widespread application was so far hampered by moderate switching performances and a limited set of effector molecules available. Here, we report the re-engineering of hammerhead ribozymes in order to respond efficiently to aminoglycoside antibiotics. We first established an in vivo selection protocol in Saccharomyces cerevisiae that enabled us to search large sequence spaces for optimized switches. We then envisioned and characterized a novel strategy of attaching the aptamer to the ribozyme catalytic core, increasing the design options for rendering the ribozyme ligand-dependent. These innovations enabled the development of neomycin-dependent RNA modules that switch gene expression up to 25-fold. The presented aminoglycoside-responsive riboswitches belong to the best-performing RNA-based genetic regulators reported so far. The developed in vivo selection protocol should allow for sampling of large sequence spaces for engineering of further optimized riboswitches.

Riboswitch engineering - making the all-important second and third steps

Synthetic biology uses our understanding of biological systems to develop innovative solutions for challenges in fields as diverse as genetic control and logic devices, bioremediation, materials production or diagnostics and therapy in medicine by designing new biological components. RNA-based elements are key components of these engineered systems. Their structural and functional diversity is ideal for generating regulatory riboswitches that react with many different types of output to molecular and environmental signals. Recent advances have added new sensor and output domains to the existing toolbox, and demonstrated the portability of riboswitches to many different organisms. Improvements in riboswitch design and screens for selecting in vivo active switches provide the means to isolate riboswitches with regulatory properties more like their natural counterparts.

Probing the shielding properties of aptameric protective groups

Site-specific derivatization of chemically equivalent functional groups has recently been facilitated by the introduction of high-affinity aptamers as non-covalent protective groups. More specifically, a series of RNA aptamers have proven to be highly efficient in enhancing the regioselectivity of reactions with the aminoglycoside antibiotic neomycin B, which carries several chemically indistinguishable amino and hydroxy groups. Since small-molecule targets tend to exhibit multiple modes of binding with a single aptamer, the impact of secondary binding sites on the regioselectivity should be considered. To address this issue, we investigated a series of well-characterized RNA aptamers that bind neomycin B and propose a mechanism that accounts for the regioselective outcome of these transformations. We further demonstrate that the regioselectivity induced by non-covalent aptamer protective groups is determined by the number of binding sites, their affinity, and the mode of interaction with the guest molecule.

An adaptable pentaloop defines a robust neomycin-B RNA aptamer with conditional ligand-bound structures

Aptamers can be highly specific for their targets, which implies precise molecular recognition between aptamer and target. However, as small polymers, their structures are more subject to environmental conditions than the more constrained longer RNAs such as those that constitute the ribosome. To understand the balance between structural and environmental factors in establishing ligand specificity of aptamers, we examined the RNA aptamer (NEO1A) previously reported as specific for neomycin-B. We show that NEO1A can recognize other aminoglycosides with similar affinities as for neomycin-B and its aminoglycoside specificity is strongly influenced by ionic strength and buffer composition. NMR and 2-aminopurine (2AP) fluorescence studies of the aptamer identified a flexible pentaloop and a stable binding pocket. Consistent with a well-structured binding pocket, docking analysis results correlated with experimental measures of the binding energy for most ligands. Steady state fluorescence studies of 2AP-substituted aptamers confirmed that A16 moves to a more solvent accessible position upon ligand binding while A14 moves to a less solvent accessible position, which is most likely a base stack. Analysis of binding affinities of NEO1A sequence variants showed that the base in position 16 interacts differently with each ligand and the interaction is a function of the buffer constituents. Our results show that the pentaloop provides NEO1A with the ability to adapt to external influences on its structure, with the critical base at position 16 adjusting to incorporate each ligand into a stable pocket by hydrophobic interactions and/or hydrogen bonds depending on the ligand and the ionic environment.

Synthetic riboswitches - A tool comes of age

Within the last decade, it has become obvious that RNA plays an important role in regulating gene expression. This has led to a plethora of approaches aiming at exploiting the outstanding chemical properties of RNA to develop synthetic RNA regulators for conditional gene expression systems. Consequently, many different regulators have been developed to act on various stages of gene expression. They can be engineered to respond to almost any ligand of choice and are, therefore, of great interest for applications in synthetic biology. This review presents an overview of such engineered riboswitches, discusses their applicability and points out recent trends in their development. This article is part of a Special Issue entitled: Riboswitches.

An ultra-sensitive colorimetric detection of tetracyclines using the shortest aptamer with highly enhanced affinity

A shortened 8-mer ssDNA aptamer was successfully truncated for four different tetracyclines with high affinity. The ultrasensitive colorimetric detection of oxytetracycline using this shortened aptamer was possible, which was about 500-fold enhanced compared to that obtained using the original 76-mer aptamer.

Investigating the malleability of RNA aptamers

Aptamers are short, single-stranded nucleic acids with structures that frequently change upon ligand binding and are sensitive to the ionic environment. To achieve facile application of aptamers in controlling cellular activities, a better understanding is needed of aptamer ligand binding parameters, structures, intramolecular mobilities and how these structures adapt to different ionic environments with consequent effects on their ligand binding characteristics. Here we discuss the integration of biochemical analysis with NMR spectroscopy and computational modeling to explore the relation between ligand binding and structural malleability of some well-studied aptamers. Several methods for determining aptamer binding affinity and specificity are discussed, including isothermal titration calorimetry, steady state fluorescence of 2-aminopurine substituted aptamers, and dye displacement assays. Also considered are aspects of molecular dynamics simulations specific to aptamers including adding ions and simulating aptamer structure in the absence of ligand when NMR spectroscopy or X-ray crystallography structures of the unoccupied aptamer are not available. We focus specifically on RNA aptamers that bind small molecule ligands as would be applied in sensors or integrated into riboswitches such as to measure the products of metabolic activity.

Challenges and opportunities for small molecule aptamer development

Aptamers are single-stranded oligonucleotides that bind to targets with high affinity and selectivity. Their use as molecular recognition elements has emerged as a viable approach for biosensing, diagnostics, and therapeutics. Despite this potential, relatively few aptamers exist that bind to small molecules. Small molecules are important targets for investigation due to their diverse biological functions as well as their clinical and commercial uses. Novel, effective molecular recognition probes for these compounds are therefore of great interest. This paper will highlight the technical challenges of aptamer development for small molecule targets, as well as the opportunities that exist for their application in biosensing and chemical biology.

Challenges and opportunities for small molecule aptamer development

Aptamers are single-stranded oligonucleotides that bind to targets with high affinity and selectivity. Their use as molecular recognition elements has emerged as a viable approach for biosensing, diagnostics, and therapeutics. Despite this potential, relatively few aptamers exist that bind to small molecules. Small molecules are important targets for investigation due to their diverse biological functions as well as their clinical and commercial uses. Novel, effective molecular recognition probes for these compounds are therefore of great interest. This paper will highlight the technical challenges of aptamer development for small molecule targets, as well as the opportunities that exist for their application in biosensing and chemical biology.

Selective transformations of complex molecules are enabled by aptameric protective groups

Emerging trends in drug discovery are prompting a renewed interest in natural products as a source of chemical diversity and lead structures. However, owing to the structural complexity of many natural compounds, the synthesis of derivatives is not easily realized. Here, we demonstrate a conceptually new approach using oligonucleotides as aptameric protective groups. These block several functionalities by non-covalent interactions in a complex molecule and enable the highly chemo- and regioselective derivatization (>99%) of natural antibiotics in a single synthetic step with excellent conversions of up to 83%. This technique reveals an important structure-activity relationship in neamine-based antibiotics and should help both to accelerate the discovery of new biologically active structures and to avoid potentially costly and cumbersome synthetic routes.

RNASTAR: an RNA STructural Alignment Repository that provides insight into the evolution of natural and artificial RNAs

Automated RNA alignment algorithms often fail to recapture the essential conserved sites that are critical for function. To assist in the refinement of these algorithms, we manually curated a set of 148 alignments with a total of 9600 unique sequences, in which each alignment was backed by at least one crystal or NMR structure. These alignments included both naturally and artificially selected molecules. We used principles of isostericity to improve the alignments from an average of 83%-94% isosteric base pairs. We expect that this alignment collection will assist in a wide range of benchmarking efforts and provide new insight into evolutionary principles governing change in RNA structural motifs. The improved alignments have been contributed to the Rfam database.

Engineered riboswitches: Expanding researchers' toolbox with synthetic RNA regulators

Riboswitches are natural RNA-based genetic switches that sense small-molecule metabolites and regulate in response the expression of the corresponding metabolic genes. Within the last years, several engineered riboswitches have been developed that act on various stages of gene expression. These switches can be engineered to respond to any ligand of choice and are therefore of great interest for synthetic biology. In this review, we present an overview of engineered riboswitches and discuss their application in conditional gene expression systems. We will provide structural and mechanistic insights and point out problems and recent trends in the development of engineered riboswitches.

A nanoscale drug delivery carrier using nucleic acid aptamers for extended release of therapeutic

We have synthesized, characterized, and optimized a novel nano drug-delivery carrier that utilizes the versatile properties of nucleic acid for programmable and on-demand drug release. The drug-delivery carrier consists of 15 nm gold nanoparticles (AuNPs) functionalized with drug binding DNA aptamers via single-stranded (ss) anchor DNA. The presence of anchor DNA makes the nanocarrier flexible to be reprogrammed with various aptamers. Under the optimum binding conditions (0.4 M NaCl and 4 μM DNA), a maximum of 101 ± 8 anchor DNA strands were conjugated per particle. On binding DNA-aptamer:drug complexes to AuNPs, a maximum of 35 neomycin molecules were bound per AuNP. Controlled and extended release of drug from the synthesized carrier was obtained by temperature and affinity modulations. Furthermore, for the first time, we demonstrated that neomycin could bind to DNA with very high affinity (K(d) = 98.101 nM). This DNA-based nanocarrier, designed using the principles of molecular biology, is expected to impact a number of treatment strategies.

FROM THE CLINICAL EDITOR

In this basic science work, the authors demonstrate the feasibility of utilizing a novel nano drug-delivery carrier with the versatile properties of nucleic acid for programmable and on-demand drug release.

Nucleic acid and peptide aptamers: fundamentals and bioanalytical aspects

In recent years new nucleic acid and protein-based combinatorial molecules have attracted the attention of researchers working in various areas of science, ranging from medicine to analytical chemistry. These molecules, called aptamers, have been proposed as alternatives to antibodies in many different applications. The aim of this Review is to illustrate the peculiarities of these combinatorial molecules which have initially been explored for their importance in molecular medicine, but have enormous potential in other biotechnological fields historically dominated by antibodies, such as bioassays. A description of these molecules is given, and the methods for their selection and production are also summarized. Moreover, critical aspects related to these molecules are discussed.