Novel fiber coated with β-cyclodextrin derivatives used for headspace solid-phase microextraction of ephedrine and methamphetamine in human urine

Methamphetamine Removal from Aquatic Environments by Magnetic Microrobots with Cyclodextrin Chiral Recognition Elements

The growing consumption of drugs of abuse together with the inefficiency of the current wastewater treatment plants toward their presence has resulted in an emergent class of pollutants. Thus, the development of alternative approaches to remediate this environmental threat is urgently needed. Microrobots, combining autonomous motion with great tunability for the development of specific tasks, have turned into promising candidates to take on the challenge. Here, hybrid urchin-like hematite (α-Fe2O3) microparticles carrying magnetite (Fe3O4) nanoparticles and surface functionalization with organic β-cyclodextrin (CD) molecules are prepared with the aim of on-the-fly encapsulation of illicit drugs into the linked CD cavities of moving microrobots. The resulting mag-CD microrobots are tested against methamphetamine (MA), proving their ability for the removal of this psychoactive substance. A dramatically enhanced capture of MA from water with active magnetically powered microrobots when compared with static passive CD-modified particles is demonstrated. This work shows the advantages of enhanced mass transfer provided by the externally controlled magnetic navigation in microrobots that together with the versatility of their design is an efficient strategy to clean polluted waters.

Application of HKUST-1 metal-organic framework as coating for headspace solid-phase microextraction of some addictive drugs

In the present study, a copper-based metal-organic framework (HKUST-1) was used first time for preconcentration trace amounts of addictive drugs in biological samples. HKUST-1 was synthesized and coated onto the surface of stainless steel wire. The prepared coating was used in headspace solid-phase microextraction method coupled with gas chromatography-mass spectrometry for preconcentration and determination of some addictive drugs in biological fluids. Prepared coating shows good extraction efficiency due to large surface area, and π-π stacking interaction with selected analytes. Under optimum conditions, the method was validated with a reasonable determination coefficient (R²  > 0.9961) and suitable linear dynamic range (0.5-1000 μg L^-1 ). Also, the limits of detections were obtained in the range of 0.1-0.4, 0.2-0.6, and 0.4-0.7 μg L^-1 for water, urine, and plasma samples, respectively. The limits of quantification of present method were obtained in the range 0.5-1.3, 0.7-1.5, and 1.0-1.9 μg L^-1 in water, urine, and plasma samples, respectively. The intra-day and inter-dye single fiber and fiber to fiber relative standard deviations were observed in the range 3.0-13.9% and 3.5-12.3%, respectively. Finally, the present method was applied for the determination of the drugs in biological samples.

Application of Microextraction-Based Techniques for Screening-Controlled Drugs in Forensic Context-A Review

The analysis of controlled drugs in forensic matrices, i.e., urine, blood, plasma, saliva, and hair, is one of the current hot topics in the clinical and toxicological context. The use of microextraction-based approaches has gained considerable notoriety, mainly due to the great simplicity, cost-benefit, and environmental sustainability. For this reason, the application of these innovative techniques has become more relevant than ever in programs for monitoring priority substances such as the main illicit drugs, e.g., opioids, stimulants, cannabinoids, hallucinogens, dissociative drugs, and related compounds. The present contribution aims to make a comprehensive review on the state-of-the art advantages and future trends on the application of microextraction-based techniques for screening-controlled drugs in the forensic context.

Cyclodextrins as a Key Piece in Nanostructured Materials: Quantitation and Remediation of Pollutants

Separation and pre-concentration of trace pollutants from their matrix by reversible formation of inclusion complexes has turned into a widely studied field, especially for the benefits provided to different areas. Cyclodextrins are non-toxic oligosaccharides that are well known for their host–guest chemistry, low prices, and negligible environmental impact. Therefore, they have been widely used as chiral selectors and delivery systems in the pharmaceutical and food industry over time. However, their use for extraction purposes is hampered by their high solubility in water. This difficulty is being overcome with a variety of investigations in materials science. The setting-up of novel solid sorbents with improved properties thanks to the presence of cyclodextrins at their structure is still an open research area. Some properties they can offer, such as an increased selectivity or a good distribution along the surface of a solid support, which provides better accessibility for guest molecules, are characteristics of great interest. This systematic review reports the most significant uses of cyclodextrins for the adsorption of pollutants in different-origin samples based on the works reported in the literature in the last years. The study has been carried out indistinctly for quantitation and remediation purposes.

Electrospun polyamide/graphene oxide/polypyrrole composite nanofibers: an efficient sorbent for headspace solid phase microextraction of methamphetamine in urine samples followed by GC-MS analysis

A novel polyamide/graphene oxide/polypyrrole nanofiber was fabricated with the aid of the electrospinning technique and applied in headspace solid phase microextraction.

Cyclodextrin-based sorbents for solid phase extraction

Cyclodestrins (CDs) are cyclic oligosaccharides well-known for their ability to form host-guest inclusion complexes with properly sized compounds. They have been used for decades as chiral selectors as well as drug delivery systems within the frameworks of separation science and pharmaceutical science. More recently, their use has been extended to the field of extractive science under the stimulus of additional advantageous characteristics, such as low-price, negligible environmental impact, non-toxicity, as arising from the fact that natural CDs are starch degradation products. To abate their solubility in water and generate novel sorbents for solid phase extraction, the following approaches have been employed: (i) immobilization onto inert materials (silica, attapulgite, etc.); (ii) immobilization onto nanomaterials (magnetic nanoparticles, titanium oxide, carbon nanotubes, graphene oxide, etc.); (iii) polymerisation with specific cross-linkers to form the so-called CD-based nanosponges. Particularly promising are these last ones for their selectivity, mesoporous structure, insolubility in aqueous media and good dispersibility. This review offers a concise overview on the state of art and future prospects of CDs in this important sector of the analytical chemistry, offering a critical perspective of the most significant applications.

The use of magnetic starch as a support for an ionic liquid-β-cyclodextrin based catalyst for the synthesis of imidazothiadiazolamine derivatives

In this paper, a novel catalyst is introduced based on the introduction of an ionic liquid onto the β-cyclodextrin. The ionic liquid-β-cyclodextrin was anchored to magnetic starch (denoted βCD-IL@M-Starch) and fully characterized by several methods including TEM, TGA, VSM and FT-IR. The catalyst was used for the synthesis of imidazo[2,1-b][1,3,4]thiadiazol-5-amine and imidazo[1,2-a]pyridin-3-amine derivatives. βCD-IL@M-Starch catalyst showed very good activity in the synthesis of diphenylimidazo[2,1-b][1,3,4]thiadiazol-5-amine derivatives from the corresponding benzaldehyde, semicarbazide, benzaldehydes and isocyanides. The products were obtained in a mild reaction conditions in good isolated yields in the presence of βCD-IL@M-Starch as catalyst. The catalyst showed to be magnetically reusable, and gave very good results in 10 sequential reactions.

Sol-gel niobia sorbent with a positively charged octadecyl ligand providing enhanced enrichment of nucleotides and organophosphorus pesticides in capillary microextraction for online HPLC analysis

A niobia-based sol-gel organic-inorganic hybrid sorbent carrying a positively charged C₁₈ ligand (Nb₂ O₅ -C₁₈ (+ve)) was synthesized to achieve enhanced enrichment capability in capillary microextraction of organophosphorus compounds (which include organophosphorus pesticides and nucleotides) before their online analysis by high-performance liquid chromatography. The sorbent was designed to simultaneously provide three different types of molecular level interactions: electrostatic, Lewis acid-base, and van der Waals interactions. To understand relative contributions of various molecular level analyte-sorbent interactions in the extraction process, two other sol-gel niobia sorbents were also created: (a) a purely inorganic sol-gel niobia sorbent (Nb₂ O₅ ) and (b) an organic-inorganic hybrid sol-gel niobia sorbent carrying an electrically neutral-bonded octadecyl ligand (Nb₂ O₅ -C₁₈ ). The extraction efficiency of the created sol-gel niobia sorbent (Nb₂ O₅ -C₁₈ (+ve)) was compared with that of analogously designed and synthesized titania-based sol-gel sorbent (TiO₂ -C₁₈ (+ve)), taking into consideration that titania-based sorbents present state-of-the-art extraction media for organophosphorus compounds. In capillary microextraction with high-performance liquid chromatography analysis, Nb₂ O₅ -C₁₈ (+ve) had shown 40-50% higher specific extraction values (a measure of extraction efficiency) over that of TiO₂ -C₁₈ (+ve). Compared to TiO₂ -C₁₈ (+ve), Nb₂ O₅ -C₁₈ (+ve) also provided superior analyte desorption efficiency (96 vs. 90%) during the online release of the extracted organophosphorus pesticides from the sorbent coating in the capillary microextraction capillary to the chromatographic column using reversed-phase high-performance liquid chromatography mobile phase.

Preparation and characterization of an aptamer-functionalized solid-phase microextraction fiber and its application in the selective monitoring of adenosine phosphates with liquid chromatography and tandem mass spectrometry

An aptamer with adenosine triphosphate as a ligand was immobilized onto the surface of a porous-polymer-coated fiber to obtain an aptamer-functionalized porous-polymer-coated solid-phase microextraction fiber. The fiber was observed with a crosslinked and porous morphological surface structure. It shows specific selectivity to adenosine triphosphate with a selectivity coefficient of 22.1 compared to the scrambled oligonucleotide functionalized fiber, and the selectivity factors over other analogues and reference compounds were from 6.1 to 77.5. When the fiber-based solid-phase microextraction was coupled with liquid chromatography and tandem mass spectrometry, detection limits of 2.7, 29, and 34 μg/L were achieved for adenosine triphosphate, adenosine diphosphate, and adenosine monophosphate, respectively. The spiking recoveries of 77.6-91.9% were achieved for trace adenosine phosphates in human serum sample. Furthermore, the fibers showed high stability and good reusability and could be used over 50 times for the real serum sample pretreatment without remarkable performance reduction.

Fabrication of a porous β-cyclodextrin-polymer-coated solid-phase microextraction fiber for the simultaneous determination of five contaminants in water using gas chromatography-mass spectrometry

A novel solid-phase microextraction fiber coated with a porous β-cyclodextrin polymer was developed. The porous β-cyclodextrin polymer cross-linked using tetrafluoroterephthalonitrile, possessed well-distributed pores and the largest surface area among current β-cyclodextrin polymers. Scanning electron microscopy revealed that the coating had a continuous wrinkled and folded structure, which guarantees a sufficient loading capacity for contaminants. The properties of the developed fiber were evaluated using headspace solid-phase microextraction of five contaminants as model analytes coupled with gas chromatography-mass spectrometry. Owing to the advantages of a large surface area and three-dimensional cavities, the novel fiber exhibited excellent operational stability and extraction ability. After optimisation of the extraction conditions, including extraction temperature, extraction time, salt effect, and desorption time, validation of the method with water samples achieved good linearity over a wide range (0.01–120 μg L⁻¹) and low detection limits (0.003–1.600 μg L⁻¹). The single-fiber and fiber-to-fiber repeatabilities were 1.7–11.0% and 1.9–11.0%, respectively. The method was applied to the simultaneous analysis of five analytes with satisfactory recoveries (76.6–106.0% for pond water and 89.0–105.9% for rainwater).

A novel solid-phase microextraction fiber coated with a porous β-cyclodextrin polymer was developed.

Determination of Xylene and Toluene by Solid-Phase Microextraction Using Au Nanoparticles-Thiol Silane Film Coupled to Ion Mobility Spectrometry

A simple, rapid and sensitive method for analysis of xylene and toluene was developed using the solid-phase microextraction (SPME) combined with ion mobilityspectrometry (IMS). Gold nanoparticles-thiol silane film (Au NPs-TSF) was applied as a newsorbent for SPME. Thiol silane film was formed on the surface of a stainless steel wire through incorporating Au nanoparticles during synthesis using sol-gel technique. The extraction properties of the fiber to xylene and toluene were examined, using a SPME device and thermal desorption ininjection port of IMS. The calibration graphs were linear in the range of 1.10-32.0 and 16.0-112.0 ppb for xylene and toluene, respectively. The detection limits for xylene and toluene were 0.7 and 8.0 ppb, respectively. The proposed method was applied without any considerable sample pretreatment and it was found to be simple enough to be strongly recommended for real sample analysis.

Combination of counter current salting-out homogenous liquid-liquid extraction and dispersive liquid-liquid microextraction as a novel microextraction of drugs in urine samples

The counter current salting-out homogenous liquid-liquid extraction (CCSHLLE) joined with the dispersive liquid-liquid microextraction based on solidification of floating organic drop (DLLME-SFO) has been developed as a high preconcentration technique for the determination of different drugs in urine samples. Amphetamines were employed as model compounds to assess the extraction procedure and were determined by high performance liquid chromatography-ultraviolet detection (HPLC-UV). In this method, initially, NaCl as a separation reagent is filled into a small column and a mixture of urine and acetonitrile is passed through the column. By passing the mixture, NaCl is dissolved and the fine droplets of acetonitrile are formed due to salting-out effect. The produced droplets go up through the remained mixture and collect as a separated layer. Then, the collected acetonitrile is removed with a syringe and mixed with 30.0μL 1-undecanol (extraction solvent). In the second step, the 5.00mLK2CO3 solution (2% w/v) is rapidly injected into the above mixture placed in a test tube for further DLLME-SFO. Under the optimum conditions, calibration curves are linear in the range of 1-3000μgL(-1) and limit of detections (LODs) are in the range of 0.5-2μgL(-1). The extraction recoveries and enrichment factors ranged from 78 to 84% and 157 to 168, respectively. Repeatability (intra-day) and reproducibility (inter-day) of method based on seven replicate measurements of 100μgL(-1) of amphetamines were in the range of 3.5-4.5% and 4-5%, respectively. The method was successfully applied for the determination of amphetamines in the actual urine samples. The relative recoveries of urine samples spiked with amphetamine and methamphetamine are 90-108%.

Occurrence of additive brominated flame retardants in aquatic organisms from Tai Lake and Yangtze River in Eastern China, 2009-2012

Since the phase-out of PBDEs, reports regarding occurrences of these compounds in the environment have become less frequent. To characterize potential influences of the phase-out of PBDEs' on concentrations in the environment, trends in concentrations as a function of time were investigated for two additive brominated flame retardants, PBDEs and HBCDs. Three aquatic species, including shrimp, common carp, and yellow catfish, were collected from Meiliang Bay of Tai Lake, 2009-2012. The analysis of PBDEs in three aquatic organisms has shown a downward-trend in the first three years but a significant upward-trend in the final year. Concentrations of HBCDs have not shown temporal increases in the investigated environments. Concentrations of both PBDEs and HBCDs in the three studied organisms increased as a function of trophic level, which suggested that these additive flame retardants can be biomagnified through the food web of Tai Lake. In accordance with previous publications, PBDE-47 contributed the greatest proportion of ∑PBDEs and had a detection frequency of 100%. α-HBCD was the predominate isomer that contributed to ∑HBCDs. Both β-HBCD and γ-HBCD were likely detected at lesser concentrations than the α-isomer due to differences in bioavailability. Concentrations of ∑PBDEs in the three aquatic organisms from Tai Lake ranged from 1.13 to 97.59 ng g(-1) lipid. These concentrations were generally less than those in biota from other countries, but equal to those found at other locations in China. Specimens from the Yangtze River had greater concentrations of ∑HBCDs (169.6-316.5 ng g(-1) lipid) than those collected at Tai Lake, which were comparatively greater than many reported concentrations in freshwater organisms from other countries.

Microextraction in urine samples for gas chromatography: a review

Since the complexity origin of biological samples, the research trends have been directed to the development of new miniaturized sample preparation techniques. This review provides a comprehensive survey of past and present microextraction methods followed by GC analysis for preconcentration and determination of various analytes in urine samples. These techniques have been classified in three general groups, including liquid-, solid- and membrane-based techniques. The principal of different microextraction methods that are located in each general group as well as their various extraction modes and the recent developments introduced for them has been presented. Subsequently, a comparison survey has been carried out among different microextraction techniques and finally a future perspective has been predicted based on the existing literature.

Solid phase microextraction and related techniques for drugs in biological samples

In drug discovery and development, the quantification of drugs in biological samples is an important task for the determination of the physiological performance of the investigated drugs. After sampling, the next step in the analytical process is sample preparation. Because of the low concentration levels of drug in plasma and the variety of the metabolites, the selected extraction technique should be virtually exhaustive. Recent developments of sample handling techniques are directed, from one side, toward automatization and online coupling of sample preparation units. The primary objective of this review is to present the recent developments in microextraction sample preparation methods for analysis of drugs in biological fluids. Microextraction techniques allow for less consumption of solvent, reagents, and packing materials, and small sample volumes can be used. In this review the use of solid phase microextraction (SPME), microextraction in packed sorbent (MEPS), and stir-bar sorbtive extraction (SBSE) in drug analysis will be discussed. In addition, the use of new sorbents such as monoliths and molecularly imprinted polymers will be presented.

Rapid extraction and determination of amphetamines in human urine samples using dispersive liquid-liquid microextraction and solidification of floating organic drop followed by high performance liquid chromatography

A novel, rapid, simple and sensitive dispersive liquid-liquid microextraction method based on the solidification of floating organic drop (DLLME-SFO) combined with high-performance liquid chromatography-ultraviolet detection (HPLC-UV) was used to determine amphetamine and methamphetamine in urine samples. The factors affecting the extraction efficiency of DLLME-SFO such as the kind and volume of the extraction and the disperser solvents, effect of concentration of K2CO3 and extraction time were investigated and the optimal extraction conditions were established. Under the optimum conditions (extraction solvent: 30.0μl 1-undecanol; disperser solvent: 300μl acetonitrile; buffer concentration: 2% (w/v) K2CO3 and extraction time: 1min), calibration curves are linear in the range of 10-3000μgl(-1) and limit of detections (LODs) are in the range of 2-8μgl(-1). The relative standard deviations (RSDs) for 100μgl(-1) of amphetamine and methamphetamine in diluted urine are in the range of 6.2-7.8% (n=7). The method was successfully applied for the determination of amphetamine and methamphetamine in the actual urine samples. The relative recoveries of urine samples spiked with amphetamine and methamphetamine are 87.8-113.2%. The obtained results show that DLLME-SFO combined with HPLC-UV is a fast and simple method for the determination of amphetamine and methamphetamine in urine.

Dioxin-like potency of HO- and MeO- analogues of PBDEs' the potential risk through consumption of fish from eastern China

Polybrominated diphenyl ethers (PBDEs) and their analogues, such as hydroxylated PBDE (HO-PBDEs) and methoxylated PBDE (MeO-PBDEs) are of interest due to their wide distribution, bioaccumulation and potential toxicity to humans and wildlife. While information on the toxicity/biological potencies of PBDEs was available, information on analogues of PBDEs was limited. Dioxin-like toxicity of 34 PBDEs analogues was evaluated by use of the H4IIE-luc, rat hepatoma transactivation bioassay in 384-well plate format at concentrations ranging from 0 to 10 000 ng/mL. Among the 34 target analogues of PBDEs studied here, 19 activated the aryl hydrocarbon receptor (AhR) and induced significant dioxin-like responses in H4IIE-luc cells. Efficacies of the analogues of PBDEs ranged from 5.0% to 101.8% of the maximum response caused by 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD-max) and their respective 2,3,7,8-TCDD potency factors (ReP(H4IIE-luc)) ranged from 7.35 × 10(-12) to 4.00 × 10(-4), some of which were equal to or more potent than some mono-ortho-substituted PCBs (TEF-(WHO) = 3 × 10(-5)). HO-PBDEs exhibited greater dioxin-like activity than did the corresponding MeO-PBDEs. Analogues of PBDEs were detected mostly in marine organisms. Of these 11 detected analogues of PBDEs, 6 were found to have measurable dioxin-like potency. Though some analogues of PBDEs exhibited significant dioxin-like potency as measured by responses of the H4IIE-luc transactivation assay, concentrations of 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) equivalents ((PBDEs analogues)TEQ(H4IIE-luc)), calculated as the sum of the product of concentrations of individual PBDE and their ReP(H4IIE-luc), were less than the tolerance limit proposed by European Union and the oral reference dose (RfD) derived by U.S. Environmental Protection Agency, respectively. (Hazard Quotients (HQ) < 0.005) Additional investigations should be conducted to evaluate the toxic potencies of these chemicals, especially for 2'-MeO-BDE-28, 4-HO-BDE-90, 6-HO-BDE-47, and 6-MeO-BDE-47, which had been detected in other environmental media, including human blood.

Toxicogenomic mechanisms of 6-HO-BDE-47, 6-MeO-BDE-47, and BDE-47 in E. coli

Cytotoxicity of 6-HO-BDE-47 and its two analogues, BDE-47 and 6-MeO-BDE-47, and the associated molecular mechanisms were assessed by use of a live cell reporter assay system which contains a library of 1820 modified green fluorescent protein (GFP) expressing promoter reporter vectors constructed from E. coli K12 strains. 6-HO-BDE-47 inhibited growth of E. coli with a 4 h median effect concentration (EC50) of 22.52 ± 2.20 mg/L, but neither BDE-47 nor 6-MeO-BDE-47 were cytotoxic. Thus, 6-HO-BDE-47 might serve as an antibiotic in some living organisms. Exposure to 6-HO-BDE-47 resulted in 65 (fold change >2) or 129 (fold change >1.5) genes being differentially expressed. The no observed transcriptional effect concentration (NOTEC) and median transcriptional effect concentration (TEC50) based on transcriptional end points, of 6-HO-BDE-47 were 0.0438 and 0.580 mg/L, respectively. The transcriptional responses were 514- and 39-fold more sensitive than the acute EC50 to inhibit cell growth. Most of the genes that were differentially expressed in response to 6-HO-BDE-47 were not modulated by BDE-47 or 6-MeO-BDE-47. These results suggest that cytotoxicity of 6-HO-BDE-47 to E. coli was via a mechanism that was different from that of either BDE-47 or 6-MeO-BDE-47. Gene expression associated with metabolic pathways was more responsive to 6-HO-BDE-47, which suggests that this pathway might be the primary target of this compound.

Molecularly imprinted polymer coated on stainless steel fiber for solid-phase microextraction of chloroacetanilide herbicides in soybean and corn

A molecularly imprinted polymer (MIP) with metolachlor as template was firstly coated on stainless steel fiber through chemical bonding strategy to solve the fragility problem of silica fiber substrate for solid-phase microextraction. The surface pretreatment of stainless steel fiber and the polymerization conditions were investigated systematically to enhance the preparation feasibility and MIP coating performance, and then a porous and highly cross-linked MIP coating with 14.8-microm thickness was obtained with over 200 times re-usability which was supported by non-fragile stainless steel fiber adoption. The MIP coating possessed specific selectivities to metolachlor, its metabolites and other chloroacetanilide herbicides with the factors of 1.1-4.6. Good extraction capacities of metolachlor, propisochlor and butachlor were found with MIP coating under quick adsorption and desorption kinetics, and the detection limits of 3.0, 9.6 and 38 microg L(-1) were achieved, respectively. Moreover, the MIP-coated stainless steel fiber was evaluated for trace metolachlor, propisochlor and butachlor extraction in the spiked soybean and corn samples, and the enrichment factors of 54-60, 27-31 and 15-20 were obtained, respectively.

Effects of storage condition factors on fungal invasion of Radix Ophiopogonis

Fungal invasion is a main factor leading to the loss of postharvest herbs during storage. To prevent fungal invasion and clarify the favorable conditions for the stability of herbs during the storage period, uniform design and three-dimensional response surfaces were applied to investigate the relationship of the mildew degree of Radix Ophiopogonis induced by prevalent fungal isolates and the storage factors including air relative humidity (X(1)), temperature (X(2)), and moisture content (X(3)), in laboratory studies. Mildew degree was evaluated by ergosterol assay of mold isolates through a high-performance liquid chromatography-diode array detector (HPLC-DAD) technique. As a result, storage conditions, which satisfied the following correlation equations established by the relationships between the storage factors and the biomass of mildew (Y), could effectively prevent fungal spoilage: Y = -0.2484084028 + 0.00030711966572 x X(3) x X(3) + 0.00018881361186 x X(1) x X(2) - 0.00029473040679 x X(2) x X(3) <or= 0; Y = -0.2697457586 + 0.004127756022 x X(1) - 0.000015977780492 x X(1) x X(1) + 0.00021906984606 x X(2) x X(3) <or= 0; Y = -0.325655811 + 0.015464432582 x X(2) + 0.00004779394354 x X(1) x X(1) - 0.00021743815482 x X(2) x X(2) <or= 0. This compositive methodology might be useful to predict the occurrence of fungal invasion.

Analytical methods used in conjunction with solid-phase microextraction: a review of recent bioanalytical applications

Integration of sampling and sample preparation with various analytical instruments is a highly desirable feature for any analytical method. This is most conveniently achieved by using microextraction techniques or various microdevices. Among these techniques, solid-phase microextraction (SPME) is particularly remarkable due to its simplicity and effectiveness. This review discusses the most recent applications of SPME in bioanalysis, grouped according to the analytical instrument that SPME is coupled to. It is shown that one of the most important aspects of such analytical methods is the ability of SPME to perform direct and selective extraction of analytes from complex biological samples. By far, the most popular method continues to be SPME coupled to GC. Nevertheless, the last 2 years have witnessed significant advances in other areas, such as successful automation of SPME coupled to liquid chromatography and the development of new coatings suitable for direct extraction from biological samples. Furthermore, a few bioanalytical applications based on direct coupling of SPME to MS, ion mobility spectrometry, CE and analytical chemiluminescence have been reported.