Determination of bisphenols A and F and their diglycidyl ethers in wastewater and river water by coacervative extraction and liquid chromatography–fluorimetry

Spatial distribution, source identification, and potential risks of 14 bisphenol analogues in soil under different land uses in the megacity of Chengdu, China

This study explored the levels, distribution, potential sources, ecological risks and estrogenic activities of 14 bisphenol analogues (BPs) in soil under eight land-use types in the megacity of Chengdu, China. Eleven BPs were detected in the soil samples and the total concentrations ranged from 32.3 to 570 ng/g d.w. Levels of bisphenol BP (BPBP) in the soil (up to 208 ng/g d.w.) only second to the most dominant compound bisphenol A (BPA) were found. Relatively higher Σ14BP accumulation in the soil was observed in the commercial and residential areas (median: 136 ng/g d.w. and 131 ng/g d.w.) compared with agricultural area (median: 67.5 ng/g d.w.). Source identification indicated the role of atmospheric particulate deposition and consecutive anthropogenic activities in BP emission. The ecotoxicity assessment implied that BPA, bisphenol S (BPS), bisphenol F (BPF) and bisphenol PH (BPPH) might pose low to medium risk to the ecosystem due to their extensive use and biological effects. The calculated 17β-estradiol equivalents of BPs were in the range of 0.501-7.74 pg E2/g d.w, and the estrogenic activities were inferior to those contributed by natural estrogens in the soil.

Exploring BPA alternatives - Environmental levels and toxicity review

Bisphenol A alternatives are manufactured as potentially less harmful substitutes of bisphenol A (BPA) that offer similar functionality. These alternatives are already in the market, entering the environment and thus raising ecological concerns. However, it can be expected that levels of BPA alternatives will dominate in the future, they are limited information on their environmental safety. The EU PARC project highlights BPA alternatives as priority chemicals and consolidates information on BPA alternatives, with a focus on environmental relevance and on the identification of the research gaps. The review highlighted aspects and future perspectives. In brief, an extension of environmental monitoring is crucial, extending it to cover BPA alternatives to track their levels and facilitate the timely implementation of mitigation measures. The biological activity has been studied for BPA alternatives, but in a non-systematic way and prioritized a limited number of chemicals. For several BPA alternatives, the data has already provided substantial evidence regarding their potential harm to the environment. We stress the importance of conducting more comprehensive assessments that go beyond the traditional reproductive studies and focus on overlooked relevant endpoints. Future research should also consider mixture effects, realistic environmental concentrations, and the long-term consequences on biota and ecosystems.

Bisphenol A and its substitutes in the aquatic environment: Occurrence and toxicity assessment

Bisphenol A is classified as a high production volume chemical commonly used in the manufacture of polycarbonate plastics, epoxy resins and thermal paper. The endocrine disrupting properties of this xenobiotic have led to the restriction and prohibition of its use in many consumer products. To date, many chemical compounds with a chemical structure similar to bisphenol A have been used in consumer products as its replacement. The ubiquitous occurrence of bisphenol A and its substitutes in the environment and their endocrine activity as well as adverse effects on aquatic organisms is a global concern, especially because many available literature reports show that many substitutes (e.g. bisphenol AF, bisphenol AP, bisphenol B, bisphenol C, bisphenol F, bisphenol G, bisphenol FL, tetrabromobisphenol A) exert adverse effects on aquatic organisms, similar to, or even stronger than bisphenol A. Therefore, the objective of this paper is to provide a comprehensive overview of the production, sources, occurrence and associated toxicity, as well as the endocrine activity of bisphenol A and its substitutes on aquatic species. The environmental levels and ecotoxicological data presented in this review allowed for a preliminary assessment and prediction of the risk of bisphenol A and its substitutes for aquatic organisms. Furthermore, the data collected in this paper highlight that several compounds applied in bisphenol A-free products are not safe alternatives and regulations regarding their use should be introduced.

Electrochemical sensors based on carbon nanostructures for the analysis of bisphenol A-A review

Overuse of Bisphenol A (BPA), a proven endocrine disruptor, has become a serious public health problem across the world. It has the potential to harm both the environment and human health, notably reproductive disorders, heart disease, and diabetes. Accordingly, much attention has been paid to the detection of BPA to promote food safety and environmental health. Carbon based nanostructures have proven themselves well in a variety of applications, such as energy storage, catalysis and sensors, due to their remarkable properties. Therefore, researchers have recently focused on fabricating electrochemical BPA sensors based on carbon nanostructures due to their unique advantages, such as real-time monitoring, simplicity, high selectivity, high sensitivity and easy operation. The purpose of the current review was to summarize the recent findings on carbon nanostructures for electrochemically sensing the BPA, as well as relevant future prospects and ongoing challenges.

The occurrence of selected endocrine-disrupting chemicals in water and sediments from an urban lagoon in Southern Italy

Endocrine-disrupting chemicals (EDCs) are agents able to exert perturbation toward the endocrine system via a broad array of signalling pathways. Some EDCs are released into the environment as a result of antropogenic activities. Analytical surveillance plays a critical role in investigating the prevalence of such chemicals in environmental samples. A study was carried out in a lagoon in Southern Italy, a water basin relates to the sea through a mouth channel, making this water body a "dynamic environment". The screening of fourteen EDCs in surface waters and sediments, includes a fast and cost-effective sample preparation, based on a solid-liquid (sediments) and liquid-liquid (surface waters) extraction and a chromatographic analysis by liquid chromatography tandem UV and fluorescence detection. Only four chemicals out the fourteen investigated EDCs were detected in both matrices with a frequency higher than 60%. The average concentrations of the single EDC were higher in sediments (730-155.000 ng kg^-1  dw) than in surface waters (132-28.000 ng L^-1 ). Limited to the assayed EDCs, the ecosystem has a low risk regarding to the conservation of biodiversity of the animal species living thereby, since the total estrogenic activity does not exceed 1 ng L^-1 . PRACTITIONER POINTS: Occurrence of selected EDCs was investigated in an Italian lagoon in Southern Italy. BPAF, BADGE, and BPA were the most frequently and highly detected compounds in both waters and sediments. Concentration levels were greater in the sediment than in water samples. Low risk for the ecosystem biodiversity concerning investigated EDCs.

A comprehensive review on the analytical method, occurrence, transformation and toxicity of a reactive pollutant: BADGE

Bisphenol A diglycidyl ether (BADGE)-based epoxy resin is one of the most widely used epoxy resins with an annual production amount of several million tons. Compared with all other legacy or emerging organic compounds, BADGE is special due to its toxicity and high reactivity in the environment. More and more studies are available on its analytical methods, occurrence, transformation and toxicity. Here, we provided a comprehensive review of the current BADGE-related studies, with focus on its production, application, available analytical methods, occurrences in the environment and human specimen, abiotic and biotic transformation, as well as the in vitro and in vivo toxicities. The available data show that BADGE and its derivatives are ubiquitous environmental chemicals and often well detected in human specimens. For their analysis, a water-free sample pretreatment should be considered to avoid hydrolysis. Additionally, their complex reactions with endogenous metabolites are areas of great interest. To date, the monitoring and further understanding of their transport and fate in the environment are still quite lacking, comparing with its analogues bisphenol A (BPA) and bisphenol S (BPS). In terms of toxicity, the summary of its current studies and Environmental Protection Agency (EPA) ToxCast toxicity database suggests BADGE might be an endocrine disruptor, though more detailed evidence is still needed to confirm this hypothesis in in vivo animal models. Future study of BADGE should focus on its metabolic transformation, reaction with protein and validation of its role as an endocrine disruptor. We believe that the elucidation of BADGEs can greatly enhance our understandings of those reactive compounds in the environment and human.

Molecularly imprinted curcumin nanoparticles decorated paper for electrochemical and fluorescence dual-mode sensing of bisphenol A

A molecularly imprinted paper-based analytical device (MIP-μPAD) was developed for the sensing of bisphenol A (BPA). The platform was screen-printed onto a filter paper support, where the electrodes and the fluorescence μPADs were designed. Owing to its dual electrochemical and fluorescence responses, molecularly imprinted curcumin nanoparticles were used to sense BPA. The μPAD design was characterized by transmission electron microscopy, scanning electron microscopy, fluorescence spectroscopy, and electrochemical techniques. The sensor design comprised a wide linear range from 1 to 200 μg L^-1 with limits of detection of 0.47 ± 0.2 and 0.62 ± 0.3 μg L^-1 (LOD, S/N = 3) for electrochemical and fluorescence sensing, respectively. Furthermore, the system showed good analytical performance such as selectivity, stability, and reproducibility. The feasibility of the MIP-μPAD was demonstrated for the sensing of BPA in seawater, foods, and polycarbonate plastic packaged water with recovery values of 97.2 and 101.8%.

Urinary Concentrations of Bisphenols in the Australian Population and Their Association with the Per Capita Mass Loads in Wastewater

Health concerns and related regulation of bisphenol A (BPA) in some countries have led to an increase in the production and use of unregulated and poorly understood BPA analogues, including bisphenol S (BPS), bisphenol F (BPF), bisphenol B (BPB), and bisphenol AF (BPAF). To assess the temporal trends of human exposure to BPA analogues, urine and wastewater samples were collected from South East Queensland, Australia between 2012 and 2017 and analyzed for five bisphenols using validated isotope dilution liquid chromatography tandem mass spectrometry methods. BPA and BPS were the predominant bisphenols detected in both urine and wastewater samples, with median concentrations of 2.5 and 0.64 μg/L in urine and 0.94 and 1.1 μg/L in wastewater, respectively. BPB, BPF, and BPAF had low detection frequencies in both urine and wastewater samples. Concentrations of BPA in both urine and wastewater decreased over the sampling period, whereas concentrations of BPS increased, suggesting that BPS has become a BPA replacement. The contributions of urinary excretion to wastewater were calculated by the ratio of daily per capita urinary excretion to wastewater-based mass loads of bisphenols. Urinary BPA and BPS contributed to less than 1% of the load found in wastewater, indicating that much of the BPA and BPS originates from other sources.

Occurrence and assessment of environmental risks of endocrine disrupting compounds in drinking, surface and wastewaters in Serbia

The present study is the first comprehensive monitoring of 13 selected endocrine disrupting compounds (EDCs) in untreated urban and industrial wastewater in Serbia to assess their impact on the Danube River basin and associated freshwaters used as sources for drinking water production in the area. Results showed that natural and synthetic estrogens were present in surface and wastewater at concentrations ranging from 0.1 to 64.8 ng L^-1. Nevertheless, they were not detected in drinking water. For alkylphenols concentrations ranged from 1.1 to 78.3 ng L^-1 in wastewater and from 0.1 to 37.2 ng L^-1 in surface water, while in drinking water concentrations varied from 0.4 to 7.9 ng L^-1. Bisphenol A (BPA) was the most abundant compound in all water types, with frequencies of detection ranging from 57% in drinking water, to 70% in surface and 84% in wastewater. Potential environmental risks were characterized by calculating the risk quotients (RQs) and the estrogenic activity of EDCs in waste, surface and drinking water samples, as an indicator of their potential detrimental effects. RQ values of estrone (E1) and estradiol (E2) were the highest, exceeding the threshold value of 1 in 60% of wastewater samples, while in surface water E1 displayed potential risks in only two samples. Total estrogenic activity (EEQ_t) surpassed the threshold of 1 ng E2 L^-1 in about 67% of wastewater samples, and in 3 surface water samples. In drinking water, EEQ_t was below 1 ng L^-1 in all samples.

Twenty years of supramolecular solvents in sample preparation for chromatography: achievements and challenges ahead

Supramolecular solvents (SUPRAS) have progressively become a suitable alternative to organic solvents for sample preparation in chromatographic analysis. The inherent properties of these nanostructured solvents (e.g. different polarity microenvironments, multiple binding sites, possibility of tailoring their properties, etc.) offer multiple opportunities for the development of innovative sample treatment platforms not approachable by conventional solvents. In this review, major achievements attained in the combination SUPRAS-chromatography in the last 20 years as well as the challenges that should be addressed in the near future are critically discussed. Among achievements, particular attention is paid to the theoretical and practical knowledge gained that has helped make substantial progress in the area. In this respect, advances in the understanding of the mechanisms involved in SUPRAS formation and SUPRAS-solute interactions driving extractions are discussed, with a view to the setting up of knowledge-based extraction procedures. Likewise, the strategies followed to improve the compatibility of SUPRAS extracts with liquid and gas chromatography and adapt SUPRAS-based extractions to different formats are presented. Ongoing efforts to apply SUPRAS in multicomponent extractions and synthesize tailored SUPRAS for the development of innovative sample treatments are highlighted. Among challenges identified, discussion is focused on the automation of SUPRAS-based sample treatment and the elucidation of SUPRAS nanostructures, which are considered essential for their acceptance in routine labs and the design of tailored SUPRAS with programmed functions. Graphical abstract.

Assessment of different isotope dilution strategies and their combination with switchable solvent-based liquid phase microextraction prior to the quantification of bisphenol A at trace levels via GC-MS

Different isotope dilution strategies were evaluated to quantify bisphenol A. High accuracy and precision were achieved by SS-LPME and ID⁴ combination.

Bisphenol-A (BPA) in Foods commonly consumed in Southwest Nigeria and its Human Health Risk

Bisphenol-A (BPA) is a synthetic chemical ubiquitous in the environment and listed as an endocrine disruptor. It has the tendency of migrating into food stored in materials containing it. This study, therefore, determines the concentrations of BPA in foods commonly consumed in Southwest Nigeria by the adult population and also estimates the risk associated with human exposure. Eight different food categories were selected for this study. Standard QuEChERS protocol was used for sample extraction and analysed using gas chromatography-mass spectrometry (GC-MS). Vegetable oil had the highest BPA concentration (28.4 ng/g). This was followed by aquatic canned fish (26.3 ng/g), canned beef (21.3 ng/g) and crayfish (17.5 ng/g). These concentrations were below the 600 ng/g limit of the European Commission for BPA in foods. Bisphenol-A was not detected in raw beef, chicken, cheese, apple, tomatoes, beans and rice; and chicken eggs. The adult population had an average dietary intake of 30.4 ng/kg bw/day. There is no likely occurrence of harmful health effects of BPA in the selected foods with respect to the current concentrations found therein. However, routine monitoring is recommended to prevent human exposure to BPA.

Occurrence, fate and risk assessment of BPA and its substituents in wastewater treatment plant: A review

Several bisphenol analogues (BPs) are gradually replacing bisphenol A (BPA) in many fields, following strict restrictions on the production and use of BPA. The presence of micropollutants in wastewater treatment plants (WWTPs) may pose risks to the aquatic ecosystem and human health. In this review, we outlined the occurrence and fate of BPs in WWTPs, and estimated their potential risks to the aquatic ecosystem. BPA is still the most predominant bisphenol analogue in WWTPs with high detection rate and concentration, followed by bisphenol S (BPS) and F (BPF). Biodegradation and adsorption are the main removal pathways for removal of BPs in WWTPs. The secondary (activated sludge process, biological aerated filter, and membrane bioreactor) and advanced (membrane technique, ultraviolet disinfection, adsorption process, and ozonation) treatment processes show high removal efficiency for BPs, which are influenced by many factors such as sludge retention time and redox conditions. BPs other than BPA (assessed in this review) in effluent of WWTPs have low risks to Daphnia magna and early life stages on medaka, while BPA shows a medium or high risk under certain conditions. Knowledge gaps have been identified and future line of research on this class of chemicals in WWTPs is recommended. More data are needed to illustrate the occurrence and fate of BPs in WWTPs. Environmental risks of BPs other than BPA initiating from wastewater discharge to aquatic organisms remain largely unknown.

Supramolecular solvent-based microextraction of emerging bisphenol A replacements (colour developers) in indoor dust from public environments

Bisphenol A (BPA) is present in a wide variety of materials and it is a well-known endocrine disruptor that is widespread in indoor and outdoor environments. For this reason, industry has introduced a variety of replacements, such as Bisphenol S (BPS) or Bisphenol F (BPF), and other less known structural analogs, such as BPS-MAE, D-8 or TGSA. These emerging potential contaminants have been identified in thermal paper products, according to recent studies, but their potential toxic effects and their migration into the environment remain unclear. In this study, we report for the first time the presence of emerging BPA replacements in indoor dust from public environments (shops, restaurants, etc.). For this purpose, we optimized a novel supramolecular solvent (SUPRAS)-based microextraction method. SUPRAS are multi-target solvents made up of self-assembled amphiphiles. They offer multiple extraction interactions (dispersion, polar, hydrophobic, etc.) and they constitute excellent candidates to develop generic and fast sample treatment procedures at low cost. By this method, emerging BPA replacements (BPS-MAE, D-8 and TGSA) were detected in dust at median concentrations in the range 6-22 ng g^-1 (around ten times lower than BPS) with detection frequencies in the range 50-90%. These results constitute a first insight into the migration of emerging BPA replacements into the environment via indoor dust, which is a common route of human exposure to contaminants.

Mass flows and removal of eight bisphenol analogs, bisphenol A diglycidyl ether and its derivatives in two wastewater treatment plants in New York State, USA

Despite high production and usage of bisphenols including bisphenol A (BPA) as well as bisphenol A diglycidyl ether and its derivatives (BADGEs), little is known about the occurrence and fate of these substances in wastewater treatment plants (WWTPs) in the U.S. In this study, we investigated the occurrence, removal, mass flows, and fate of eight bisphenol analogues and six BADGEs based on the concentrations measured in influent, primary effluent, final effluent, and sludge from two WWTPs (WWTP_A and WWTP_B) in the Albany area of New York State, USA. BPA, bisphenol F, bisphenol S, and BADGE·2H₂O were the predominant compounds found in influents of both WWTPs, at respective geometric mean (GM) concentrations of 90.0, 90.2, 31.2, and 6.48 ng/L in WWTP_A, and 53.3, <MLOQ, 27.6, 2.25 ng/L in WWTP_B. Incomplete removal of these compounds was observed in both WWTPs with the highest removal rate (52%) was found for BPA after the secondary treatment in WWTP_A. The fraction of BPA sorbed to suspended particulate matter (SPM) was 6.83%. Mean daily mass loadings of total bisphenols and BADGEs ranged from 9.2 [∑(BADGEs) in WWTP_B] to 226 mg/d/1000 inhabitants [∑(BPs) in WWTP_A]. The environmental emission rates of total bisphenols and BADGEs through effluent discharges from WWTPs ranged from 13.7 [∑(BADGEs) in WWTP_B] to 246 mg/d/1000 inhabitants [∑(BPs) in WWTP_A]. Overall, bisphenols and BADGEs were not removed completely by activated sludge treatment. Furthermore, formation of bisphenols from the degradation of microplastics or other precursors such as alkylated bisphenols, in WWTPs is suggested.

Determination of Nine Bisphenol-Diglycidyl Ethers in Human Breast Milk by Ultrahigh-Performance Liquid Chromatography Tandem Mass Spectrometry

Because of their widespread use, and the mutagenicity and teratogenicity observed in in vitro studies, bisphenol-diglycidyl ethers (BDGEs) were suspected of posing health risks to humans, especially to infants. Quantifying exposure of BDGEs from breast milk is essential in assessing the potential health risks of these ubiquitous compounds to infants. However, there is no reported analytical method for the determination of BDGEs in breast milk. In this context, we developed a rapid and sensitive method based on ultrahigh-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) to measure nine BDGEs in breast milk. The analytes were extracted with acetonitrile and fat was removed by freezing under -20 °C. The extracts were further purified by PRiME HLB solid-phase extraction (SPE) cartridge. The limits of detection (LODs) and quantification (LOQs) for the analytes were 0.033-0.500 and 0.100-1.500 μg L^-1, respectively. The recoveries of BDGEs were ranged from 71.33% to 114.33%. Good method reproducibility regarding intra- and interday precision was observed, yielding relative standard deviations (RSDs) less than 11.81% and 10.83%, respectively. The proposed method was successfully applied to 20 breast milk samples. BADGE·2H₂O, BADGE·HCl·H₂O, BADGE·H₂O, BADGE·HCl, BFDGE·2H₂O, and BFDGE·2HCl were detected. BFDGE·2HCl was the dominant BDGE with detection rate of 65.0% and the concentration ranging from 0.4 to 1.0 μg L^-1. This is the first report describing the occurrence of BDGEs in breast milk.

Assessing ecotoxicity and the endocrine potential of selected phthalates, BADGE and BFDGE derivatives in relation to environmentally detectable levels

There is no doubt that the subject area of plastic materials (e.g., production of epoxy resins or polyesters) is inherently connected to issues concerning bisphenol A (BPA) and its analogues. Unfortunately, much less attention has been given to other compounds, which are also used for the production of these materials. Bisphenol A diglycidyl ether (BADGE) is a synthetic industrial compound obtained by a condensation reaction between epichlorohydrin (ECH) and BPA. Similarly, novolac glycidyl ether (BFDGE) is produced in the reaction between novolac and epichlorohydrin. Nevertheless, there is a lack of information on the combined effects of BADGE derivatives at environmentally relevant levels. In the current study, toxicity levels in Microtox® and XenoScreen YES/YAS assays were determined for several analogues alone, then the biological effects of compound pairs mixed in 33, 66 and 100% of each compounds' EC₅₀ ratios were evaluated. The Microtox® test has been chosen as a relevant tool, and the results were referred to the Xenoscreen YES/YAS assay, which has been chosen for the fast determination of the endocrine potential of the compounds tested. The results obtained constitutes the basis for model studies, with Concentration Addition (CA) and Independent Action (IA), followed by Model Deviation Ratio (MDR) interpretation, to evaluate the possible interactions occurring between analytes when present in mixtures. The results indicate that the hydrochloric derivatives of BADGE and BFDGE are of the greatest toxicological and endocrine threat. Thus, their presence in mixtures under certain environmental conditions (including presence in the tissues of living organisms) should be strictly monitored and reported, especially in acidic environments. Strong evidence on the synergic behaviors of these analytes, which expressed high toxicity (EC₅₀ 2.69-117.49μg/mL), is demonstrated with Model Deviation Ratio (MDR).

Real-time and label-free detection of bisphenol A by an ssDNA aptamer sensor combined with dual polarization interferometry

DPI is an efficient and reliable platform for detection of organic pollutants and toxicants.

Bisphenol A and replacements in thermal paper: A review

Thermal paper contains potentially toxic compounds such as bisphenol A (BPA), which is used as a color developer. BPA has been reported in thermal paper in concentrations up to 42,600 μg g^-1. The exposure to BPA via dermal transfer has been recently discussed as a significant contribution to the overall human exposure and the estimated daily intake (EDI) has been reported up to 218 μg d^-1. BPA has been also detected in recycled paper with concentrations up to 46 μg g^-1. Due to the fact that BPA is a known endocrine disruptor and migrates from materials, regulatory restrictions have been established to prevent risks for the human health. As a consequence, structural analogues, such as bisphenol S (BPS) have been introduced into the market. Little is known about the presence and toxicity of these emerging replacements, and concern has risen about them. The present review gives an overview of the occurrence and levels of BPA and replacements in thermal paper. BPA is still the most common color developer found in thermal paper, followed by BPS. The analytical methods used for quantification of BPA and BPA replacements in paper products are also reviewed. BPA is transferred from thermal paper products to the finger pads upon handling it. Paper-skin transfer followed by penetration of BPA depends on conditions (e.g. greasiness of fingers and use of hand cream). It is, however, still debated whether thermal paper as a source for human exposure contributes significantly to the overall internal BPA exposure.

Spectroscopic and molecular modeling approaches to investigate the interaction of bisphenol A, bisphenol F and their diglycidyl ethers with PPARα

A fluorescence polarization (FP) assay for the simultaneous determination of bisphenol A (BPA), bisphenol F (BPF), bisphenol A diglycidyl ether (BADGE) and bisphenol F diglycidyl ether (BFDGE) was developed. The method was based on the competition between bisphenols (BPs) and fluorescein-labeled dexamethasone derivative (Dex-fl) for mouse peroxisome proliferator-activated receptor α ligand binding domain (mPPARα-LBD). A recombinant soluble protein derivative mPPARα-LBD* was prepared, then in vitro binding of 4 BPs to mPPARα-LBD* was investigated. Fluorescence polarization assay showed that these compounds exhibited different binding potencies with mPPARα-LBD*. Additionally, molecular dynamics simulations were performed to further understand the mechanism of BPs binding affinity for mPPARα-LBD*. Docking results elucidated that the driving forces for the binding of BPs to mPPARα-LBD* were predominantly dependent on hydrophobic and hydrogen-bonding interactions. Comparison of the calculated binding energies vs. experimental binding affinities yielded a good correlation (R² = 0.7258). The proposed method has potential for multi-residue detection of BPA, BPF, BADGE, and BFDGE.

Mass loading and removal of benzotriazoles, benzothiazoles, benzophenones, and bisphenols in Indian sewage treatment plants

Little is known about the occurrence of emerging environmental contaminants, such as benzotriazoles (BTRs), benzothiazoles (BTHs), benzophenones (BzPs), and bisphenol analogues (BPs) in India. In this study, we determined the occurrence and removal of BTRs, BTHs, BzPs, and BPs in five Indian sewage treatment plants (STPs). The respective measured mean concentrations (N = 5) in influents and effluents were 370 and 57.4 ng L^-1 for BTRs, 50800 and 20200 ng L^-1 for BTHs, 351 and 163 ng L^-1 for BzPs, and 98.0 and 9.6 ng L^-1 for BPs. Among the target chemicals analyzed, BTHs were found at elevated levels, and the measured levels were some of the highest ever reported in the literature. The mean concentrations (N = 5) of BTRs, BTHs, BzPs, and BPs in sludge were 44.2, 51200, 124, and 200 ng g^-1 dry wt, respectively. The removal efficiencies for BTRs, BTHs, BzPs, and BPs ranged as follows: 54.2-85.6%, 23.4-85.0%, 51.8-71%, and 76.0-97.0%, respectively, and were comparable to those reported for other countries. Elevated concentrations of BTHs in Indian STPs can be related to consumption of these chemicals in a wide range of products including paper, textile and rubber materials.

Fluorogenic Sensing of Carcinogenic Bisphenol A using Aptamer-Capped Mesoporous Silica Nanoparticles

Mesoporous silica nanoparticles loaded with rhodamine B and capped with a bisphenol A aptamer were used for the selective and sensitive detection of this lethal chemical. The pores of the nanoparticles are selectively opened in the presence of bisphenol A (through its selective coordination with the aptamer) with subsequent rhodamine B delivery. With this capped material a limit of detection as low as 3.5 μm of bisphenol A was measured.

Developmental toxicity of bisphenol A diglycidyl ether (epoxide resin badge) during the early life cycle of a native amphibian species

Bisphenol A diglycidyl ether (BADGE) is used in packaging materials, in epoxy adhesives, and as an additive for plastics, but it is also a potential industrial wastewater contaminant. The aim of the present study was to evaluate the adverse effects of BADGE on Rhinella arenarum by means of standardized bioassays at embryo-larval development. The results showed that BADGE was more toxic to embryos than to larvae at all exposure times. At acute exposure, lethality rates of embryos exposed to concentrations of 0.0005 mg/L BADGE and greater were significantly higher than rates in the vehicle control, whereas lethality rates of larvae were significantly higher in concentrations of 10 mg/L BADGE and greater. The toxicity then increased significantly, with 96-h median lethal concentrations (LC50s) of 0.13 mg/L and 6.9 mg/L BADGE for embryos and larvae, respectively. By the end of the chronic period, the 336-h LC50s were 0.04 mg/L and 2.2 mg/L BADGE for embryos and larvae, respectively. This differential sensitivity was also ascertained by the 24-h pulse exposure experiments, in which embryos showed a stage-dependent toxicity, with blastula being the most sensitive stage and S.23 the most resistant. The most important sublethal effects in embryos were cell dissociation and delayed development, whereas the main abnormalities observed in larvae related to neurotoxicity, as scare response to stimuli and narcotic effect. Environ Toxicol Chem 2016;35:3031-3038. © 2016 SETAC.

Monitoring of emerging pollutants in Guadiamar River basin (South of Spain): analytical method, spatial distribution and environmental risk assessment

Guadiamar River is located in the southwest of the Iberian Peninsula and connects two protected areas in the South of Spain: Sierra Morena and Doñana National Park. It is sited in an area affected by urban, industrial and agriculture sewage pollution and with tradition on intensive mining activities. Most of the studies performed in this area have been mainly focused on the presence of heavy metals and, until now, little is known about the occurrence of other contaminants such as emerging organic pollutants (EOPs). In this work, an analytical method has been optimized and validated for monitoring of forty-seven EOPs in surface water. The analytical method has been applied to study the distribution and environmental risk of these pollutants in Guadiamar River basin. The analytical method was based on solid-phase extraction and determination by liquid chromatography-triple quadrupole-tandem mass spectrometry. The 60 % of the target compounds were found in the analyzed samples. The highest concentrations were found for two plasticizers (bisphenol A and di(2-ethyhexyl)phthalate, mean concentration up to 930 ng/L) and two pharmaceutical compounds (caffeine (up to 623 ng/L) and salicylic acid (up to 318 ng/L)). This study allowed to evaluate the potential sources (industrial or urban) of the studied compounds and the spatial distribution of their concentrations along the river. Environmental risk assessment showed a major risk on the south of the river, mainly due to discharges of wastewater effluents.

Enhanced Biological Trace Organic Contaminant Removal: A Lab-Scale Demonstration with Bisphenol A-Degrading Bacteria Sphingobium sp. BiD32

Discharge of trace organic contaminants (TOrCs) from wastewater treatment plants (WWTPs) may contribute to deleterious effects on aquatic life. Release to the environment occurs both through WWTP effluent discharge and runoff following land applications of biosolids. This study introduces Enhanced Biological TOrC Removal (EBTCR), which involves continuous bioaugmentation of TOrC-degrading bacteria for improved removal in WWTPs. Influence of bioaugmentation on enhanced degradation was investigated in two lab-scale sequencing batch reactors (SBRs), using bisphenol A (BPA) as the TOrC. The reactors were operated with 8 cycles per day and at two solids retention times (SRTs). Once each day, the test reactor was bioaugmented with Sphingobium sp. BiD32, a documented BPA-degrading culture. After bioaugmentation, BPA degradation (including both the dissolved and sorbed fractions) was 2-4 times higher in the test reactor than in a control reactor. Improved removal persisted for >5 cycles following bioaugmentation. By the last cycle of the day, enhanced BPA removal was lost, although it returned with the next bioaugmentation. A net loss of Sphingobium sp. BiD32 was observed in the reactors, supporting the original hypothesis that continuous bioaugmentation (rather than single-dose bioaugmentation) would be required to improve TOrCs removal during wastewater treatment. This study represents a first demonstration of a biologically based approach for enhanced TOrCs removal that both reduces concentrations in wastewater effluent and prevents transfer to biosolids.

Occurrence of bisphenols, bisphenol A diglycidyl ethers (BADGEs), and novolac glycidyl ethers (NOGEs) in indoor air from Albany, New York, USA, and its implications for inhalation exposure

Bisphenols, bisphenol A diglycidyl ethers (BADGEs), and novolac glycidyl ethers (NOGEs) are used in the production of epoxy resins and polycarbonate plastics. Despite the widespread application of these chemicals in household products, studies on their occurrence in indoor air are limited. In this study, 83 indoor air samples were collected in 2014 from various locations in Albany, New York, USA, to determine the concentrations of bisphenols, BADGEs (refer to BADGE and its derivatives), and NOGEs (refer to NOGE and its derivatives) and to calculate inhalation exposure to these compounds. Among eight bisphenols measured, BPA, BPF, and BPS were found in bulk air (i.e., vapor plus particulate phases), at geometric mean (GM) concentrations of 0.43, 0.69 and 0.09 ng m(-3), respectively. Among 11 BADGEs and NOGEs determined, BADGE·2H2O was the predominant compound found in indoor air (detection rate [DR]: 85.5%), at concentrations as high as 6.71 ng m(-3). Estimation of inhalation exposure to these chemicals for various age groups showed that teenagers had the highest exposure doses to BPA, BPF, BPS, and BADGE·2H2O at 5.91, 9.48, 1.24, and 3.84 ng day(-1), respectively. The body weight-normalized estimates of exposure were the highest for infants, with values at 0.24, 0.39, 0.05, and 0.16 ng kg bw(-1) day(-1) for BPA, BPF, BPS, and BADGE·2H2O, respectively. This is the first survey to report inhalation exposure to bisphenols, BADGEs, and NOGEs.

Occurrence and estrogenic potency of eight bisphenol analogs in sewage sludge from the U.S. EPA targeted national sewage sludge survey

As health concerns over bisphenol A (BPA) in consumer products are mounting, this weak estrogen mimicking compound is gradually being replaced with structural analogs, whose environmental occurrence and estrogen risks are not well understood yet. We used high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) to determine the concentrations of eight bisphenol analogs in 76 sewage sludge samples collected by the U.S. Environmental Protection Agency (EPA) in 2006/2007 from 74 wastewater treatment plants (WWTPs) in 35 states. Bisphenols were detected at the following concentration ranges (ng/g dry weight) and detection frequencies: BPA (6.5-4700; 100%); bisphenol S (BPS; <1.79-1480; 84%); bisphenol F (BPF; <1.79-242; 68%); bisphenol AF (BPAF; <1.79-72.2; 46%); bisphenol P (BPP; <1.79-6.42; <5%), bisphenol B (BPB; <1.79-5.60; <5%), and bisphenol Z (BPZ; <1.79--66.7; <5%). Bisphenol AP (BPAP) was not detected in any of the samples (<1.79 ng/g dw). Concentrations of BPA in sewage sludge were an order of magnitude higher than those reported in China but similar to those in Germany. The calculated 17β-estradiol equivalents (E2EQ) of bisphenols present in sludge samples were 7.74 (0.26-90.5) pg/g dw, which were three orders of magnitude lower than the estrogenic activity contributed by natural estrogens present in the sludge. The calculated mass loading of bisphenols through the disposal of sludge and wastewater was <0.02% of the total U.S. production. As the usage of BPA is expected to decline further, environmental emissions of BPS, BPF, and BPAF are likely to increase in the future. This study establishes baseline levels and estrogenic activity of diverse bisphenol analogs in sewage sludge.

Identification of Putative Genes Involved in Bisphenol A Degradation Using Differential Protein Abundance Analysis of Sphingobium sp. BiD32

Discharge of the endocrine disrupting compound bisphenol A (BPA) with wastewater treatment plant (WWTP) effluents into surface waters results in deleterious effects on aquatic life. Sphingobium sp. BiD32 was previously isolated from activated sludge based on its ability to degrade BPA. This study investigated BPA metabolism by Sphingobium sp. BiD32 using label-free quantitative proteomics. The genome of Sphingobium sp. BiD32 was sequenced to provide a species-specific platform for optimal protein identification. The bacterial proteomes of Sphingobium sp. BiD32 in the presence and absence of BPA were identified and quantified. A total of 2155 proteins were identified; 1174 of these proteins were quantified, and 184 of these proteins had a statistically significant change in abundance in response to the presence/absence of BPA (p ≤ 0.05). Proteins encoded by genes previously identified to be responsible for protocatechuate degradation were upregulated in the presence of BPA. The analysis of the metabolites from BPA degradation by Sphingobium sp. BiD32 detected a hydroxylated metabolite. A novel p-hydroxybenzoate hydroxylase enzyme detected by proteomics was implicated in the metabolic pathway associated with the detected metabolite. This enzyme is hypothesized to be involved in BPA degradation by Sphingobium sp. BiD32, and may serve as a future genetic marker for BPA degradation.

Global Assessment of Bisphenol A in the Environment: Review and Analysis of Its Occurrence and Bioaccumulation

Because bisphenol A (BPA) is a high production volume chemical, we examined over 500 peer-reviewed studies to understand its global distribution in effluent discharges, surface waters, sewage sludge, biosolids, sediments, soils, air, wildlife, and humans. Bisphenol A was largely reported from urban ecosystems in Asia, Europe, and North America; unfortunately, information was lacking from large geographic areas, megacities, and developing countries. When sufficient data were available, probabilistic hazard assessments were performed to understand global environmental quality concerns. Exceedances of Canadian Predicted No Effect Concentrations for aquatic life were >50% for effluents in Asia, Europe, and North America but as high as 80% for surface water reports from Asia. Similarly, maximum concentrations of BPA in sediments from Asia were higher than Europe. Concentrations of BPA in wildlife, mostly for fish, ranged from 0.2 to 13 000 ng/g. We observed 60% and 40% exceedences of median levels by the US Centers for Disease Control and Prevention's National Health and Nutrition Examination Survey in Europe and Asia, respectively. These findings highlight the utility of coordinating global sensing of environmental contaminants efforts through integration of environmental monitoring and specimen banking to identify regions for implementation of more robust environmental assessment and management programs.

Occurrence of Bisphenol A Diglycidyl Ethers (BADGEs) and Novolac Glycidyl Ethers (NOGEs) in Archived Biosolids from the U.S. EPA's Targeted National Sewage Sludge Survey

Epoxy resins incorporating bisphenol A diglycidyl ether (BADGE) and novolac glycidyl ether (NOGE) are used in a wide range of applications, including adhesives, structural and electrical laminates. However, little is known about the occurrence of BADGE, NOGE, and their derivatives in the environment. Using liquid chromatography-tandem mass spectrometry, BADGE, bisphenol F glycidyl ether (BFDGE), 3-ring NOGE, and eight of their derivatives (BADGE·2 H2O, BADGE·H2O, BADGE·HCl·H2O, BADGE·2 HCl, BADGE·HCl, BFDGE·2 H2O, and BFDGE·2 HCl) were determined in archived biosolid samples collected from 68 wastewater treatment plants (WWTPs) from the northeastern, midwestern, western, and southern regions of the USA. BADGE·2 H2O was the most frequently detected (DR = 99%) and the most abundant compound found (median: 93.6 ng/g dry weight [dw]) in this family. The highest total concentrations of target chemicals, ranging from 83.6 to 2490 ng/g dw, were found in biosolids collected from the northeastern United States. The sum of geometric mean (GM) concentration of BADGE, NOGE, and their derivatives in biosolids increased with the treatment capacity of WWTPs. Based on the measured concentrations in biosolids and predicted mass in wastewater, it was estimated that approximately 3.5% of the total production of BADGEs was emitted through WWTP discharges.

Enantioselective analysis of non-steroidal anti-inflammatory drugs in freshwater fish based on microextraction with a supramolecular liquid and chiral liquid chromatography-tandem mass spectrometry

Toxicity of pharmaceuticals to aquatic biota is still largely unknown, and no research on the stereoselective toxicity of chiral drugs to these organisms has been undertaken to date. Because of the lack of analytical methods available for this purpose, this manuscript deals, for the first time, with the enantioselective analysis of the non-steroidal anti-inflammatory drugs (NSAIDs) ibuprofen, naproxen and ketoprofen in freshwater fish. The method was based on the microextraction of NSAIDs from fish muscle with a supramolecular liquid made up of inverted hexagonal aggregates of decanoic acid, their enantiomeric separation by liquid chromatography onto a (R)-1-naphthylglycine and 3,5-dinitrobenzoic acid stationary phase and quantification by tandem mass spectrometry. Limits of quantitation (LOQs) for NSAID enantiomers were in the range 1.7-3.3 ng g(-1). Absolute recoveries were from 97 to 104 %, which indicated the high extraction efficiency of the supramolecular solvent. Extraction equilibrium conditions were reached after 10 min which permitted fast sample treatment. Relative standard deviations for enantiomers in fish muscle were always below 6 %. Isotopically labelled internal standards were used to compensate for matrix interferences. The method in-house validation was carried out with the Oncorhynchus mykiss species, and it was applied to the determination of NSAID enantiomers in different fortified freshwater fish species (Alburnus alburnus, Lepomis gibbosus, Micropterus salmoides, O. mykiss and Cyprinus carpio).

Kinetics modeling predicts bioaugmentation with Sphingomonad cultures as a viable technology for enhanced pharmaceutical and personal care products removal during wastewater treatment

Pharmaceutical and personal care products (PPCPs) discharged with wastewater treatment effluents are a surface water quality concern. PPCPs are partially removed during wastewater treatment and biological transformation is an important removal mechanism. To investigate the potential for enhanced PPCP removal using bioaugmentation, bacteria were previously isolated from activated sludge capable of degrading PPCPs to ng/L concentrations. This study examined the degradation kinetics of triclosan and bisphenol A by five of these bacteria, both in pure culture and when augmented to activated sludge. Sorption coefficients were determined to account for the influence of partitioning during bioremoval. When the bacteria were added to activated sludge, degradation increased. Experimentally determined kinetic parameters were used to model a full-scale continuous treatment process, showing that low biomass could achieve reduced effluent PPCP concentrations. These results demonstrated that bioaugmentation may improve PPCP removal using established wastewater infrastructure under conditions of high solids partitioning.