Electrochemical biosensor for the detection of H2O2 from living cancer cells based on ZnO nanosheets

Eco-friendly spark-generated CoxOy nanoparticle-modified graphite screen-printed sensing surfaces for the determination of H2O2 in energy drinks

The modification of graphite screen-printed electrodes (SPEs) is reported using an eco-friendly and extremely fast method based on the direct cobalt pin electrode-to-SPE spark discharge at ambient conditions. This approach does not utilize any liquids or chemical templates, does not produce any waste, and allows the in-situ generation of CoxOy nanoparticles onto the electrode surface and the development of efficient electrocatalytic sensing surfaces for the determination of H2O2. Co-spark SPEs were characterized using scanning electron microscopy, energy-dispersive X-ray spectroscopy and x-ray photoelectron spectroscopy (XPS), revealing the formation of surface confined CoxOy nanoparticles and the diverse oxidation states of cobalt species. Co-spark SPEs were also characterized with cyclic voltammetry and electrochemical impedance spectroscopy. Redox transitions of the surface confined electrocatalysts are demonstrated by electrochemical polarization studies, showing the formation of different oxides (CoxOy), varying the XPS results. Amperometric measurements at 0.3 V vs. Ag/AgCl revealed a linear relationship between the current response and the concentration of H2O2 over the range 1 - 102 μM, achieving a limit of detection (3σ/m) of 0.6 μM. The interference effect of various electroactive species was effectively addressed by employing dual measurements in the absence and presence of the enzyme catalase. The analytical utility of the method was evaluated in antioxidant rich real-world samples, such as energy drinks, demonstrating sufficient recovery.

Implantable Electrochemical Sensors for Brain Research

Implantable electrochemical sensors provide reliable tools for in vivo brain research. Recent advances in electrode surface design and high-precision fabrication of devices led to significant developments in selectivity, reversibility, quantitative detection, stability, and compatibility of other methods, which enabled electrochemical sensors to provide molecular-scale research tools for dissecting the mechanisms of the brain. In this Perspective, we summarize the contribution of these advances to brain research and provide an outlook on the development of the next generation of electrochemical sensors for the brain.

In Vivo Electrochemical Biosensors: Recent Advances in Molecular Design, Electrode Materials, and Electrochemical Devices

Electrochemical biosensors provide powerful tools for dissecting the dynamically changing neurochemical signals in the living brain, which contribute to the insight into the physiological and pathological processes of the brain, due to their high spatial and temporal resolutions. Recent advances in the integration of in vivo electrochemical sensors with cross-disciplinary advances have reinvigorated the development of in vivo sensors with even better performance. In this Review, we summarize the recent advances in molecular design, electrode materials, and electrochemical devices for in vivo electrochemical sensors from molecular to macroscopic dimensions, highlighting the methods to obtain high performance for fulfilling the requirements for determination in the complex brain through flexible and smart design of molecules, materials, and devices. Also, we look forward to the development of next-generation in vivo electrochemical biosensors.

Recent Advances in Synthesis and Application of Metal Oxide Nanostructures in Chemical Sensors and Biosensors

Nanostructured materials formed from metal oxides offer a number of advantages, such as large surface area, improved mechanical and other physical properties, as well as adjustable electronic properties that are important in the development and application of chemical sensors and biosensor design. Nanostructures are classified using the dimensions of the nanostructure itself and their components. In this review, various types of nanostructures classified as 0D, 1D, 2D, and 3D that were successfully applied in chemical sensors and biosensors, and formed from metal oxides using different synthesis methods, are discussed. In particular, significant attention is paid to detailed analysis and future prospects of the synthesis methods of metal oxide nanostructures and their integration in chemical sensors and biosensor design.

Recent advances in metal-based nanoporous materials for sensing environmentally-related biomolecules

Highly sensitive, stable, selective, efficient, and short reaction time sensors play a substantial role in daily life/industry and are the need of the day. Due to the rising environmental issues, nanoporous carbon and metal-based materials have attracted significant attention in environmental analysis owing to their intriguing and multifunctional properties and cost-effective and rapid detection of different analytes by sensing applications. Environmental-related issues such as pollution have been a significant threat to the world. Therefore, it is necessary to fabricate highly promising performance-based sensor materials with excellent reliability, selectivity and good sensitivity for monitoring various analytes. In this regard, different methods have been employed to fabricate these sensors comprising metal, metal oxides, metal oxide carbon composites and MOFs leading to the formation of nanoporous metal and carbon composites. These composites have exceptional properties such as large surface area, distinctive porosity, and high conductivity, making them promising candidates for several versatile sensing applications. This review covers recent advances and significant studies in the sensing field of various nanoporous metal and carbon composites. Key challenges and future opportunities in this exciting field are also part of this review.

New perspective of ceria nanodots for precise tumor therapy via oxidative stress pathway

Ceria-based nanomaterials have aroused major attentions among the biomedical application research field in recent years. Most of the researches have mainly focused on promoting the functional healing therapies of normal cells/organs with cerium oxide compounds, while the applications of ceria-based materials employed on cancer curing processes have been merely mentioned. To explore the possible capabilities of cerium oxide nanomaterials exterminating tumor cells, innovatively, we synthesized the eco-friendly pure cerium oxide nanodots (CNDs), proving the prominent ability of CNDs used in tumor chemotherapy (CDT) via Fenton reaction with the highly presence of H₂O₂ (acidic pH) in tumor tissues. CNDs reacted with the self-produced H₂O₂ of tumor cells, which generated piled up toxic hydroxyl radical (·OH). The accumulated virulent ·OH restrained the growth of cancer cells intensively. This peroxidase-like activity, provided a distinguished paradigm for effective cancer curing treatment. We also verified the biosafety of CNDs applied on normal cells. Notably, not only did CNDs be harmless to normal cells, but also it protected them from the damages of reactive oxygen species (ROS). In normal cells/tissues, under the microenvironment of neutral pH and low level of H₂O₂, the CNDs could effectively function as an annihilator inhibiting ROS. They reduced the damages caused by ROS, exhibiting catalase-like activity. The research we studied, which estimated CNDs thoroughly, has provided a new perspective to the future researches of the cerium oxide biomaterial applications.

Efficient n-Type Small-Molecule Mixed Ion-Electron Conductors and Application in Hydrogen Peroxide Sensors

Small-molecule semiconductors used as the channel of organic electrochemical transistors (OECTs) have been rarely reported despite their inherent advantages of well-defined molecular weight, convenient scale-up synthesis, and good performance reproducibility. Herein, three small molecules based on perylene diimides are readily prepared for n-type OECTs. The final molecules show preferred energy levels, tunable backbone conformation, and high film crystallinity, rendering them good n-type dopability, favorable volumetric capacities, and substantial electron mobilities. Consequently, the OECTs afford a record-low threshold voltage of 0.05 V and a normalized peak transconductance of 4.52 × 10^-2 S cm^-1, as well as impressive long-term cycling stability. Significantly, the OECTs utilized for hydrogen peroxide sensing are further demonstrated with a detection limit of 0.75 μM. This work opens the possibility of developing nonfullerene small molecules as superior n-type OECT materials and provides important insights for designing high-performance small-molecule mixed ion-electron conductors for OECTs and (bio)sensors.

Fabrication of Co3O4/NiCo2O4 Nanocomposite for Detection of H2O2 and Dopamine

Herein, the Co₃O₄/NiCo₂O₄ nanocomposite has been prepared as a novel electrochemical sensor to accurately detect hydrogen peroxide (H₂O₂) and glucose. ZIF-67 is a metal-organic framework (MOF) with Co as the center metal ion. Co₃O₄ can be obtained by calcination of ZIF-67 at 700 °C, which can retain the structure of ZIF-67. The hollow Co₃O₄ nanocrystal was synthesized based on a calcination process of ZIF-67. This open structure can promote the whole Co₃O₄/NiCo₂O₄ nanocomposite larger accessible surface area and reactive sites. Co₃O₄ has good electrocatalytic performance, which has been applied in many fields. Moreover, H₂O₂ and dopamine sensing tests indicate that the as-prepared non-enzymatic electrochemical biosensor has good detection properties. The testing results indicate the as-prepared biosensor has a wide detection range, low detection limit, high selectivity, and long-term stability. These testing results suggest the potential application in food security, biomedicine, environmental detection, and pharmaceutical analysis.

Electrochemical sensing of hydrogen peroxide on a carbon paste electrode modified by a silver complex based on the 1,3-bis(1H-benzimidazole-2-yl)propane ligand

A new carbon paste electrode (Ag-CPE) modified with a nitrogen heterocyclic silver(I) complex, [Ag2(BBP)2](pic)2·CH3OH (BBP = 1,3-bis(1H-benzimidazol-2-yl)propane, pic = picrate), was developed as a highly sensitive and simple electrochemical sensor for the determination of hydrogen peroxide. The Ag(I) complex was prepared by an interface reaction and characterized by elemental analysis, IR and UV/Vis spectra and single crystal X-ray diffraction. The Ag(I) complex shows a dinuclear cluster structure, which is formed by two BBP ligands bridging two Ag (I) centers and an Ag–Ag interaction (d Ag–Ag = 3.0875 Å). Cyclic voltammetry and chronoamperometry studies showed that the electrochemical sensing performance of Ag-CPE for H2O2 was improved in 0.2 m phosphate buffer solution (PBS, pH = 6). The electrochemical H2O2 sensor Ag-CPE exhibits a wide linear detection range from 0.5 to 4.0 mm and a lower detection limit of 0.39 μm with a relatively high sensitivity of 6.77 μA mm −1. Moreover, the sensor also shows good anti-interference properties and stability. The results prove that the Ag(I) complex based on the bis(benzimidazole) ligand may be an efficient component of electrode materials.

Metal-Oxide Based Nanomaterials: Synthesis, Characterization and Their Applications in Electrical and Electrochemical Sensors

Pure, mixed and doped metal oxides (MOX) have attracted great interest for the development of electrical and electrochemical sensors since they are cheaper, faster, easier to operate and capable of online analysis and real-time identification. This review focuses on highly sensitive chemoresistive type sensors based on doped-SnO₂, RhO, ZnO-Ca, Sm_x-CoFe_2−xO₄ semiconductors used to detect toxic gases (H₂, CO, NO₂) and volatile organic compounds (VOCs) (e.g., acetone, ethanol) in monitoring of gaseous markers in the breath of patients with specific pathologies and for environmental pollution control. Interesting results about the monitoring of biochemical substances as dopamine, epinephrine, serotonin and glucose have been also reported using electrochemical sensors based on hybrid MOX nanocomposite modified glassy carbon and screen-printed carbon electrodes. The fundamental sensing mechanisms and commercial limitations of the MOX-based electrical and electrochemical sensors are discussed providing research directions to bridge the existing gap between new sensing concepts and real-world analytical applications.

Detection Technologies for Reactive Oxygen Species: Fluorescence and Electrochemical Methods and Their Applications

Reactive oxygen species (ROS) have been found in plants, mammals, and natural environmental processes. The presence of ROS in mammals has been linked to the development of severe diseases, such as diabetes, cancer, tumors, and several neurodegenerative conditions. The most common ROS involved in human health are superoxide (O2•-), hydrogen peroxide (H2O2), and hydroxyl radicals (•OH). Organic and inorganic molecules have been integrated with various methods to detect and monitor ROS for understanding the effect of their presence and concentration on diseases caused by oxidative stress. Among several techniques, fluorescence and electrochemical methods have been recently developed and employed for the detection of ROS. This literature review intends to critically discuss the development of these techniques to date, as well as their application for in vitro and in vivo ROS detection regarding free-radical-related diseases. Moreover, important insights into and further steps for using fluorescence and electrochemical methods in the detection of ROS are presented.

Real-time monitoring of cellular oxidative stress during aerosol sampling: a proof of concept study

The Portable In Vitro Exposure Cassette (PIVEC) was developed for on-site air quality testing using lung cells. Here, we describe the incorporation of a sensor within the PIVEC for real time monitoring of cellular oxidative stress during exposure to contaminated air. An electrochemical, enzymatic biosensor based on cytochrome c (cyt c) was selected to measure reactive oxygen species (ROS), including hydrogen peroxide and super oxides, due to the stability of signal over time. Human A549 lung cells were grown at the air-liquid interface and exposed within the PIVEC to dry 40 nm copper nanoparticle aerosols for 10 minutes. The generation of ROS compounds was measured during exposure and post-exposure for one hour using the biosensor and compared to intracellular ROS determined using the 2',7'-dichlorodihydrofluoroscein diacetate (DCFH-DA) assay. A similar increase in oxidative stress upon aerosol exposure was measured using both the cyt c biosensor and DCFH-DA assay. The incorporation of a biosensor within the PIVEC is a unique, first-of-its-kind system designed to monitor the real-time effect of aerosols.

Nanoscale Au-ZnO Heterostructure Developed by Atomic Layer Deposition Towards Amperometric H2O2 Detection

Nanoscale Au-ZnO heterostructures were fabricated on 4-in. SiO2/Si wafers by the atomic layer deposition (ALD) technique. Developed Au-ZnO heterostructures after post-deposition annealing at 250 °C were tested for amperometric hydrogen peroxide (H2O2) detection. The surface morphology and nanostructure of Au-ZnO heterostructures were examined by field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS), etc. Additionally, the electrochemical behavior of Au-ZnO heterostructures towards H2O2 sensing under various conditions is assessed by chronoamperometry and electrochemical impedance spectroscopy (EIS). The results showed that ALD-fabricated Au-ZnO heterostructures exhibited one of the highest sensitivities of 0.53 μA μM-1 cm-2, the widest linear H2O2 detection range of 1.0 μM-120 mM, a low limit of detection (LOD) of 0.78 μM, excellent selectivity under the normal operation conditions, and great long-term stability. Utilization of the ALD deposition method opens up a unique opportunity for the improvement of the various capabilities of the devices based on Au-ZnO heterostructures for amperometric detection of different chemicals.

Engineering two-dimensional metal oxides via surface functionalization for biological applications

Schematic illustration of 2D MO nanosheets for applications in biosystems.

A glassy carbon electrode modified with a nanocomposite prepared from Pd/Al layered double hydroxide and carboxymethyl cellulose for voltammetric sensing of hydrogen peroxide

A Pd/Al layered double hydroxide/carboxymethyl cellulose nanocomposite (CMC@Pd/Al-LDH) was fabricated using carboxymethyl cellulose as a green substrate via co-precipitation method. The synthesized nanocomposite was characterized using different methods such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray powder diffraction, transmission electron microscopy, and electrochemical techniques. A glassy carbon electrode (GCE) was then modified with the suspended composite to obtain an electrochemical sensor for hydrogen peroxide (H₂O₂). The voltammetric (cathodic) current of the modified GCE was measured at -380 mV (vs. Ag/AgCl), at the scan rate of 50 mV.s^-1. Results show a linear dynamic range of 1 to 120 μM, and a 0.3 µM limit of detection (at S/N = 3). Intraday and interday relative standard deviations are in the ranges of 4.9-5.4% and 6.8-7.3%, respectively. The sensor was applied for the determination of H₂O₂ in basil extracts, milk, and spiked river water samples. The recoveries are between 96.60 and 102.30%. Graphical abstractA Pd/Al layered double hydroxide/carboxymethyl cellulose nanocomposite (CMC@Pd/Al-LDH) was fabricated via co-precipitation method and was characterized using scanning electron microscopy, Energy-dispersive X-ray spectroscopy, X-ray powder diffraction, transmission electron microscopy and electrochemical techniques. CMC@Pd/Al-LDH was used to fabricate H₂O₂ electrochemical sensor.

Electrochemical-Based Biosensors on Different Zinc Oxide Nanostructures: A Review

Electrochemical biosensors have shown great potential in the medical diagnosis field. The performance of electrochemical biosensors depends on the sensing materials used. ZnO nanostructures play important roles as the active sites where biological events occur, subsequently defining the sensitivity and stability of the device. ZnO nanostructures have been synthesized into four different dimensional formations, which are zero dimensional (nanoparticles and quantum dots), one dimensional (nanorods, nanotubes, nanofibers, and nanowires), two dimensional (nanosheets, nanoflakes, nanodiscs, and nanowalls) and three dimensional (hollow spheres and nanoflowers). The zero-dimensional nanostructures could be utilized for creating more active sites with a larger surface area. Meanwhile, one-dimensional nanostructures provide a direct and stable pathway for rapid electron transport. Two-dimensional nanostructures possess a unique polar surface for enhancing the immobilization process. Finally, three-dimensional nanostructures create extra surface area because of their geometric volume. The sensing performance of each of these morphologies toward the bio-analyte level makes ZnO nanostructures a suitable candidate to be applied as active sites in electrochemical biosensors for medical diagnostic purposes. This review highlights recent advances in various dimensions of ZnO nanostructures towards electrochemical biosensor applications.

Gold nanocubes embedded biocompatible hybrid hydrogels for electrochemical detection of H2O2

Smart electrochemical biosensors have emerged as a promising alternative analytical diagnostic tool in recent clinical practice. However, improvement in the biocompatibility and electrical conductivity of the biosensor matrix and the immobilization of various bioactive molecules such as enzymes still remain challenging. The present research reports the synthesis of a biocompatible hydrogel network and its integration with gold nanocubes (AuNCs) for developing a novel biosensor with improved functionality. The interpenetrating hydrogel network consist of biopolymers developed using graft co-polymerization of β-cyclodextrin (β-CD) and chitosan (CS). The novelty of this work is in integrating the CS-g-β-CD hydrogel network with conductive AuNCs for improving hydrogel conductivity, biosensor sensitivity and use of the material for a biocompatible sensor. The present protocol advances the state of the art for the utilization of biopolymeric hydrogels system in synergy with an enzymatic biosensing protocol for exclusively detecting hydrogen peroxide (H₂O₂). Immobilization of the mitochondrial protein, cytochrome c (cyt c) into the hydrogel nanocomposite matrix was performed via thiol cross-linking. This organic-inorganic hybrid nanocomposite hydrogel matrix exhibited high biocompatibility (RAW 264.7 and N2a cell lines), improved electrical conductivity to attain high sensitivity (1.2 mA mM^-1 cm^-2) and a low detection limit (15 × 10^-9 M) for H₂O₂.

Electrospun CuO-ZnO nanohybrid: Tuning the nanostructure for improved amperometric detection of hydrogen peroxide as a non-enzymatic sensor

Hydrogen peroxide (H₂O₂) is a by-product of some biochemical processes which is catalyzed by enzymes such as glucose oxidase (GOx), cholesterol oxidase (ChoOx), etc and its overproduction in living cells can trigger cancer growth and various diseases. Therefore, H₂O₂ sensing is of great importance in the determination of diseases as well as industries and environmental health plans. We produced ZnO-CuO nanofibers by electrospinning method for non-enzymatic electrochemical H₂O₂ sensing. The sensing properties of the carbon paste electrode (CPE) modified with ZnO (0.3 wt%)/CuO (0.7 wt%) nanofibers (named as ZnO3-CuO7) for detection of H₂O₂ were explored in phosphate-buffered saline (PBS) at pH ∼ 7.4 solution. The ZnO3-CuO7 nanofiber exhibited the lowest charge transfer resistance and the highest electrocatalytic performance among other modified electrodes for detection of H₂O₂ and considered as an optimized sample. The effect of scan rate and H₂O₂ concentration in the reduction process were also investigated by cyclic voltammetry (CV) and the mechanism for the electrochemical reaction of H₂O₂ at the surface of the optimized electrode was studied. The diffusion coefficient of H₂O₂ and the catalytic rate constant were evaluated by chronoamperometry as 1.65 × 10^-5 cm² s^-1 and 6 × 10³ cm³ mol^-1 s^-1, respectively. Furthermore, amperometric detection of H₂O₂ with a low detection limit of 2.4 µM and a wide linear range of 3 to 530 µM were obtained. Meanwhile, the optimized electrode displayed no recognizable response towards some biomolecules such as ascorbic acid, uric acid, dopamine and glucose. The obtained results confirmed that the modified electrode shows high sensitivity and selectivity as a H₂O₂ biosensor with improved reproducibility and stability.

Pt-grown carbon nanofibers for detection of hydrogen peroxide

Removal of left-over catalyst particles from carbon nanomaterials is a significant scientific and technological problem. Here, we present the physical and electrochemical study of application-specific carbon nanofibers grown from Pt-catalyst layers. The use of Pt catalyst removes the requirement for any cleaning procedure as the remaining catalyst particles have a specific role in the end-application. Despite the relatively small amount of Pt in the samples (7.0 ± 0.2%), they show electrochemical features closely resembling those of polycrystalline Pt. In O₂-containing environment, the material shows two separate linear ranges for hydrogen peroxide reduction: 1–100 μM and 100–1000 μM with sensitivities of 0.432 μA μM⁻¹ cm⁻² and 0.257 μA μM⁻¹ cm⁻², respectively, with a 0.21 μM limit of detection. In deaerated solution, there is only one linear range with sensitivity 0.244 μA μM⁻¹ cm⁻² and 0.22 μM limit of detection. We suggest that the high sensitivity between 1 μM and 100 μM in solutions where O₂ is present is due to oxygen reduction reaction occurring on the CNFs producing a small additional cathodic contribution to the measured current. This has important implications when Pt-containing sensors are utilized to detect hydrogen peroxide reduction in biological, O₂-containing environment.

Application specific Pt-grown carbon nanofibers for H₂O₂ detection were characterized and the roles of dissolved oxygen and chloride ions on the electrochemical performance were assessed in detail.

Electrochemical reactive oxygen species detection by cytochrome c immobilized with vertically aligned and electrochemically reduced graphene oxide on a glassy carbon electrode

Selective detection of hydrogen peroxide and superoxide based on a cytochrome c modified glassy carbon electrode.

A non-enzymatic amperometric hydrogen peroxide sensor based on iron nanoparticles decorated reduced graphene oxide nanocomposite

A simple and facile green process was used for the synthesis of iron nanoparticles (FeNPs) decorated reduced graphene oxide (rGO) nanocomposite by using Ipomoea pes-tigridis leaf extract as a reducing and stabilizing agent. The as-prepared rGO/FeNPs nanocomposite was characterized by transmission electron microscopy, X-ray spectroscopy and Fourier transform infrared spectroscopy. The nanocomposite was further modified on the glassy carbon electrode and used for non-enzymatic sensing of hydrogen peroxide (H₂O₂). Cyclic voltammetry results reveal that rGO/FeNPs nanocomposite has excellent electro-reduction behavior to H₂O₂ when compared to the response of FeNPs and rGO modified electrodes. Furthermore, the nanocomposite modified electrode shows 9 and 6 folds enhanced reduction current response to H₂O₂ than that of rGO and FeNPs modified electrodes. Amperometric method was further used to quantify the H₂O₂ using rGO/FeNPs nanocomposite, and the response was linear over the concentration ranging from 0.1μM to 2.15mM. The detection limit and sensitivity of the sensor were estimated as 0.056μM and 0.2085μAμM^-1cm^-2, respectively. The fabricated sensor also utilized for detection of H₂O₂ in the presence of potentially active interfering species, and found high selectivity towards H₂O₂.

Amperometric Non-Enzymatic Hydrogen Peroxide Sensor Based on Aligned Zinc Oxide Nanorods

Zinc oxide (ZnO) nanorods (NRs) have been synthesized via the hydrothermal process. The NRs were grown over a conductive glass substrate. A non-enzymatic electrochemical sensor for hydrogen peroxide (H₂O₂), based on the prepared ZnO NRs, was examined through the use of current-voltage measurements. The measured currents, as a function of H₂O₂ concentrations ranging from 10 μM to 700 μM, revealed two distinct behaviours and good performance, with a lower detection limit (LOD) of 42 μM for the low range of H₂O₂ concentrations (first region), and a LOD of 143.5 μM for the higher range of H₂O₂ concentrations (second region). The prepared ZnO NRs show excellent electrocatalytic activity. This enables a measurable and stable output current. The results were correlated with the oxidation process of the H₂O₂ and revealed a good performance for the ZnO NR non-enzymatic H₂O₂ sensor.

Photo-reduction assisted synthesis of MnO2/reduced graphene oxide/P25 for electrochemical detection of hydrogen peroxide

MnO₂/RGO/P25 nanocomposites were synthesized with a photo-reduction approach for electrochemical detection of H₂O₂.

Optical behavior and sensor activity of Pb ions incorporated ZnO nanocrystals

We present the synthesis and characterization of nanocrystalline ZnO doped with Pb in different concentrations. The structural and chemical compositions of the products are characterized by XRD, XPS, EDS and FT-IR spectroscopy. The observed results suggest that Pb ions (Pb(2+) and Pb(4+)) are successfully incorporated into the lattice position of Zn(2+) ions in ZnO. The optical properties of the products are studied by UV-Vis and room temperature PL measurements. The PL emission spectra of ZnO:Pb, show the intensity quenching for both the UV and visible emissions. The influence of Pb on controlling the size and morphology of ZnO is studied by FESEM and confirmed by HRTEM. Amperometric response shows that ZnO incorporated with 0.075M of Pb ions has enhanced sensor activity for H2O2 than the undoped product.