Optimization of ultrasound assisted-emulsification-dispersive liquid–liquid microextraction by experimental design methodologies for the determination of sulfur compounds in wines by gas chromatography–mass spectrometry

Profiling of Volatile Compounds in 'Muscat Hamburg' Contaminated with Aspergillus carbonarius before OTA Biosynthesis Based on HS-SPME-GC-MS and DLLME-GC-MS

Aspergillus carbonarius is known to produce the carcinogenic ochratoxin A (OTA) in grapes. The metabolism process before OTA biosynthesis influences the content and composition of the volatile compounds in grapes. In this study, a self-established method based on QuEChERS coupled with high-performance liquid chromatography-fluorescence detection (HPLC-FLD) was used to determine the OTA levels during a seven-day contamination period. The results showed that OTA was detected on the second day after contamination with A. carbonarius. Thus, the first day was considered as the critical sampling timepoint for analyzing the volatiles in grapes before OTA biosynthesis. Additionally, the volatile compounds in grapes were analyzed using headspace solid-phase microextraction gas chromatography-mass spectrometry (HS-SPME-GC-MS) and dispersive liquid-liquid microextraction gas chromatography-mass spectrometry (DLLME-GC-MS). The corresponding data were evaluated via multivariate data analysis using projection methods, including PCA and OPLS-DA. The results indicated significant differences in the nine volatile compounds in grapes contaminated with A. carbonarius before OTA biosynthesis. The results of the Pearson correlation analysis showed positive correlations between ethyl acetate, styrene, 1-hexanol and OTA; (E)-2-hexenal and nerolic acid were negatively correlated with OTA. Overall, these findings provide a theoretical basis for the early prediction of OTA formation in grape and grape products using GC-MS technology.

Organosulfur in food samples: Recent updates on sampling, pretreatment and determination technologies

Organosulfur compounds (OSCs), mainly found in garlic, are the main biologically active substances for their pharmacological effects, including lowering of blood pressure and cholesterol, anti-cancer effect, liver protection, and anti-inflammatory. Efficient and sensitive pretreatment and determination methods of OSCs in different food matrices are of great significance. This review provides a comprehensive summary about the pretreatment and determination methods for OSCs in different food samples since 2010. Commonly used pretreatment methods, such as liquid-liquid extraction, microwave-assisted extraction, pressurized liquid extraction, liquid-liquid microextraction, solid phase extraction, dispersive solid phase extraction, solid-phase microextraction, and so on, have been summarized and overviewed in this paper. In particular, we discussed and compared various analysis methods including high performance liquid chromatography coupled with different detectors, gas chromatography-based methods, and few other methods. Finally, we tried to highlight the applicability, advantages and disadvantages of different pretreatment and analysis methods, and identified future prospects in this field.

Updating the status quo on the extraction of bioactive compounds in agro-products using a two-pot multivariate design. A comprehensive review

Extraction is regarded as the most crucial stage in analyzing bioactive compounds. Nonetheless, due to the intricacy of the matrix, numerous aspects must be optimized during the extraction of bioactive components. Although one variable at a time (OVAT) is mainly used, this is time-consuming and laborious. As a result, using an experimental design in the optimization process is beneficial with few experiments and low costs. This article critically reviewed two-pot multivariate techniques employed in extracting bioactive compounds in food in the last decade. First, a comparison of the parametric screening methods (factorial design, Taguchi, and Plackett-Burman design) was delved into, and its advantages and limitations in helping to select the critical extraction parameters were discussed. This was followed by a discussion of the response surface methodologies (central composite (CCD), Doehlert (DD), orthogonal array (OAD), mixture, D-optimal, and Box-Behnken designs (BBD), etc.), which are used to optimize the most critical variables in the extraction of bioactive compounds in food, providing a sequential comprehension of the linear and complex interactions and multiple responses and robustness tests. Next, the benefits, drawbacks, and possibilities of various response surface methodologies (RSM) and some of their usages were discussed, with food chemistry, analysis, and processing from the literature. Finally, extraction of food bioactive compounds using RSM was compared to artificial neural network modeling with their drawbacks discussed. We recommended that future experiments could compare these designs (BBD vs. CCD vs. DD, etc.) in the extraction of food-bioactive compounds. Besides, more research should be done comparing response surface methodologies and artificial neural networks regarding their practicality and limitations in extracting food-bioactive compounds.

The use of ultrasound in the South Cone region. Advances in organic and inorganic synthesis and in analytical methods

In organic and inorganic synthesis and in analytical methods, an external conventional heat source is usually applied to carry out a chemical reaction at a high temperature, or an extraction procedure. In the last decades, the use of ultrasound as an alternative energy source has become an interesting field of research in these topics in the South Cone region (Argentina, Chile, Uruguay, Southern Brazil and Paraguay). For this reason, the present review, covering the period 2009 to mid-2021, is a compilation of ultrasound-assisted synthetic and analytical methodologies.

Development of a new emulsification microextraction method based on solidification of settled organic drop: application of a novel ultra-hydrophobic tailor-made deep eutectic solvent

In this research, a new microextraction method based on the solidification of settled organic drop (SSOD) was developed by coupling a novel tailor-made ultra-hydrophobic deep eutectic solvent (DES) with effervescence assisted emulsification microextraction.

Optimizing Mass Spectrometry Analyses: A Tailored Review on the Utility of Design of Experiments

Mass spectrometry (MS) has emerged as a tool that can analyze nearly all classes of molecules, with its scope rapidly expanding in the areas of post-translational modifications, MS instrumentation, and many others. Yet integration of novel analyte preparatory and purification methods with existing or novel mass spectrometers can introduce new challenges for MS sensitivity. The mechanisms that govern detection by MS are particularly complex and interdependent, including ionization efficiency, ion suppression, and transmission. Performance of both off-line and MS methods can be optimized separately or, when appropriate, simultaneously through statistical designs, broadly referred to as "design of experiments" (DOE). The following review provides a tutorial-like guide into the selection of DOE for MS experiments, the practices for modeling and optimization of response variables, and the available software tools that support DOE implementation in any laboratory. This review comes 3 years after the latest DOE review (Hibbert DB, 2012), which provided a comprehensive overview on the types of designs available and their statistical construction. Since that time, new classes of DOE, such as the definitive screening design, have emerged and new calls have been made for mass spectrometrists to adopt the practice. Rather than exhaustively cover all possible designs, we have highlighted the three most practical DOE classes available to mass spectrometrists. This review further differentiates itself by providing expert recommendations for experimental setup and defining DOE entirely in the context of three case-studies that highlight the utility of different designs to achieve different goals. A step-by-step tutorial is also provided.

Measurement of selected polychlorinated biphenyls (PCBs) in water via ultrasound assisted emulsification-microextraction (USAEME) using low-density organic solvents

Despite bans and restrictions for their adverse health effects including endocrine disruption, due to their stability in the environment, polychlorinated biphenyls (PCBs) are still of concern for their residues in several matrices. This study employed low-density ultrasound-assisted emulsification-microextraction (USAEME) to measure selected PCBs (28, 52, 101, 118, 138, 153, and 180) in water samples for gas chromatography-mass spectrometry analysis. Among tested solvents (isooctane, chloroform, hexane, and cyclohexane), 200 μL isooctane resulted in the highest yield for a 10 mL sample. The optimized method was validated and yielded recoveries of 87.29-92.83% with the limit of detection and limit of quantification (LOQ) values 3-12 ng/L and 10-40 ng/L, respectively. Twelve tap water samples collected in September 2014 were screened using this simple, rapid, and validated method. PCB concentrations in two samples were above the LOQ values; one sample contained 1,380 ng/L of PCB 118, 530 ng/L of PCB 138, and 152 ng/L of PCB 153, and the other contained 444 ng/L of PCB 138. Despite the city water supply being clean and the municipality employing all available measures to ensure clean water supply, the general public must be made aware of the regular maintenance of local water pipelines and storage tanks for the prevention of PCB contamination.

Determination of melamine in soil samples using surfactant-enhanced hollow fiber liquid phase microextraction followed by HPLC-UV using experimental design

Surfactant-enhanced hollow fiber liquid phase (SE-HF-LPME) microextraction was applied for the extraction of melamine in conjunction with high performance liquid chromatography with UV detection (HPLC–UV). Sodium dodecyl sulfate (SDS) was added firstly to the sample solution at pH 1.9 to form hydrophobic ion-pair with protonated melamine. Then the protonated melamine–dodecyl sulfate ion-pair (Mel–DS) was extracted from aqueous phase into organic phase immobilized in the pores and lumen of the hollow fiber. After extraction, the analyte-enriched 1-octanol was withdrawn into the syringe and injected into the HPLC. Preliminary, one variable at a time method was applied to select the type of extraction solvent. Then, in screening step, the other variables that may affect the extraction efficiency of the analyte were studied using a fractional factorial design. In the next step, a central composite design was applied for optimization of the significant factors having positive effects on extraction efficiency. The optimum operational conditions included: sample volume, 5 mL; surfactant concentration, 1.5 mM; pH 1.9; stirring rate, 1500 rpm and extraction time, 60 min. Using the optimum conditions, the method was analytically evaluated. The detection limit, relative standard deviation and linear range were 0.005 μg mL⁻¹, 4.0% (3 μg mL⁻¹, n = 5) and 0.01–8 μg mL⁻¹, respectively. The performance of the procedure in extraction of melamine from the soil samples was good according to its relative recoveries in different spiking levels (95–109%).

A new analytical method to determine non-steroidal anti-inflammatory drugs in surface water using in situ derivatization combined with ultrasound-assisted emulsification microextraction followed by gas chromatography-mass spectrometry

Because of the high stability and potential toxic effects of non-steroidal anti-inflammatory drugs (NSAIDs), it is important to closely monitor their concentrations in the environment using a sensitive analytical method. In this study, a simple, rapid, efficient, and sensitive analytical method based on gas chromatography-mass spectrometry (GC-MS) was developed to determine the levels of seven common NSAIDs in various types of surface water. To simplify sample preparation, in situ derivatization using methyl chloroformate was combined with ultrasound-assisted emulsification microextraction. For selection and optimization of significant variables, experiments were statistically designed using Plackett-Burman design and central composite design. The resulting optimal conditions for derivatization and extraction were 100 μL of chloroform (extraction solvent), 10.0 mL of sample, and 240 μL of pyridine (catalyst as a base in derivatization). The optimized sample preparation coupled with optimized GC-MS analysis in selected ion monitoring mode provided good linearity from 0.010 to 5.0 ng mL(-1), and a limit of detection between 0.0050 and 0.010 ng mL(-1), good intra-day and inter-day precision (0.30-6.3% and 5.1-9.5%, respectively), and good accuracy (relative recovery; 91-117% at 0.20 ng mL(-1) and 77-105% at 2.5 ng mL(-1)). Compared with previously reported methods, the current method requires a small volume of sample and simple sample preparation steps for sensitive determination of NSAID levels using a conventional GC-MS system. The method was successfully applied to determine the levels of seven common NSAIDs in various types of surface water.

Screen-printed carbon electrodes modified with cobalt phthalocyanine for selective sulfur detection in cosmetic products

Cobalt phthalocyanine (CoPc) films were deposited on the surface of a screen-printed carbon electrode using a simple drop coating method. The cyclic voltammogram of the resulting CoPc modified screen-printed electrode (CoPc/SPE) prepared under optimum conditions shows a well-behaved redox couple due to the (Co(I)/Co(II)) system. The CoPc/SPE surface demonstrates excellent electrochemical activity towards the oxidation of sulfur in a 0.01 mol·L(-1) NaOH. A linear calibration curve with the detection limit (D(L), S/N = 3) of 0.325 mg·L(-1) was achieved by CoPc/SPE coupled with flow injection analysis of the sulfur concentration ranging from 4 to 1120 mg·L(-1). The precision of the system response was evaluated (3.60% and 3.52% RSD for 12 repeated injections), in the range of 64 and 480 mg·L(-1) sulfur. The applicability of the method was successfully demonstrated in a real sample analysis of sulfur in anti-acne creams, and good recovery was obtained. The CoPc/SPE displayed several advantages in sulfur determination including easy fabrication, high stability, and low cost.