Speciation and detection of arsenic in aqueous samples: A review of recent progress in non-atomic spectrometric methods

Synthetic bacteria designed using ars operons: a promising solution for arsenic biosensing and bioremediation

The global concern over arsenic contamination in water due to its natural occurrence and human activities has led to the development of innovative solutions for its detection and remediation. Microbial metabolism and mobilization play crucial roles in the global cycle of arsenic. Many microbial arsenic-resistance systems, especially the ars operons, prevalent in bacterial plasmids and genomes, play vital roles in arsenic resistance and are utilized as templates for designing synthetic bacteria. This review novelty focuses on the use of these tailored bacteria, engineered with ars operons, for arsenic biosensing and bioremediation. We discuss the advantages and disadvantages of using synthetic bacteria in arsenic pollution treatment. We highlight the importance of genetic circuit design, reporter development, and chassis cell optimization to improve biosensors' performance. Bacterial arsenic resistances involving several processes, such as uptake, transformation, and methylation, engineered in customized bacteria have been summarized for arsenic bioaccumulation, detoxification, and biosorption. In this review, we present recent insights on the use of synthetic bacteria designed with ars operons for developing tailored bacteria for controlling arsenic pollution, offering a promising avenue for future research and application in environmental protection.

Shipboard determination of arsenite and total dissolved inorganic arsenic in estuarine and coastal waters with an automated on-site-applicable atomic fluorescence spectrometer

The speciation of trace level arsenic (As) in estuarine and coastal waters is crucial for both biogeochemical and toxicological studies of this toxic metalloid. However, the accurate and on-site determination of As in complex seawater matrices is challenging because of the low concentration of As, the easy conversion of arsenite (As(III)) to arsenate (As(V)), and the considerable effect of salinity on the determination of As via conventional methods. In this study, a custom-made shipboard atomic fluorescence spectrometer (AFS) is reported for the on-site speciation of inorganic As in estuarine and coastal waters. After comprehensive optimization of the instrumental and chemical parameters, the method demonstrated high sensitivity (limits of detection: 0.02 μg L-1), good linearity (R2 > 0.999 for all calibration curves up to 8 μg L-1), high precision (relative standard deviations (RSDs) of less than 2% at 1 μg L-1 over a year-long evaluation), and excellent performance for sample analysis for different matrices with varying salinities (recoveries: 96.3%-105.3%). The portable and field-applicable AFS was successfully applied to the on-site and shipboard simultaneous determination of As(III) and total dissolved inorganic arsenic (TDIAs) in the coastal waters of Shandong, Jiangsu, Zhejiang, Fujian, and Guangdong province of China, demonstrating its robustness and applicability in harsh conditions.

Voltammetric determination of inorganic arsenic in mildly acidified (pH 4.7) groundwaters from Mexico and India

Routine monitoring of inorganic arsenic in groundwater using sensitive, reliable, easy-to-use and affordable analytical methods is integral to identifying sources, and delivering appropriate remediation solutions, to the widespread global issue of arsenic pollution. Voltammetry has many advantages over other analytical techniques, but the low electroactivity of arsenic(V) requires the use of either reducing agents or relatively strong acidic conditions, which both complicate the analytical procedures, and require more complex material handling by skilled operators. Here, we present the voltammetric determination of total inorganic arsenic in conditions of near-neutral pH using a new commercially available 25 μm diameter gold microwire (called the Gold Wirebond), which is described here for the first time. The method is based on the addition of low concentrations of permanganate (10 μM MnO4-) which fulfils two roles: (1) to ensure that all inorganic arsenic is present as arsenate by chemically oxidising arsenite to arsenate and, (2) to provide a source of manganese allowing the sensitive detection of arsenate by anodic stripping voltammetry at a gold electrode. Tests were carried out in synthetic solutions of various pH (ranging from 4.7 to 9) in presence/absence of chloride. The best response was obtained in 0.25 M chloride-containing acetate buffer resulting in analytical parameters (limit of detection of 0.28 μg L-1 for 10 s deposition time, linear range up to 20 μg L-1 and a sensitivity of 63.5 nA ppb-1. s-1) better than those obtained in acidic conditions. We used this new method to measure arsenic concentrations in contrasting groundwaters: the reducing, arsenite-rich groundwaters of India (West Bengal and Bihar regions) and the oxidising, arsenate-rich groundwaters of Mexico (Guanajuato region). Very good agreement was obtained in all groundwaters with arsenic concentrations measured by inductively coupled plasma-mass spectrometry (slope = +1.029, R2 = 0.99). The voltammetric method is sensitive, faster than other voltammetric techniques for detection of arsenic (typically 10 min per sample including triplicate measurements and 2 standard additions), easier to implement than previous methods (no acidic conditions, no chemical reduction required, reproducible sensor, can be used by non-voltammetric experts) and could enable cheaper groundwater surveying campaigns with in-the-field analysis for quick data reporting, even in remote communities.

Interactions between arsenic migration and CH4 emission in a soil bioelectrochemical system under the effect of zero-valent iron

Dissimilatory soil arsenic (As) reduction and release are driven by microbial extracellular electron transfer (EET), while reverse EET mediates soil methane (CH₄) emission. Nevertheless, the detailed biogeochemical mechanisms underlying the tight links between soil As migration and methanogenesis are unclear. This study used a bioelectrochemical-based system (BES) to explore the potential effects of zero-valent iron (ZVI) addition on "As migration-CH₄ emission" interactions from chemical and microbiological perspectives. Voltage and ZVI amendment experiments showed that dissolved As was efficiently immobilized with increased CH₄ production in the soil BES, As release and CH₄ production exhibited a high negative exponential correlation, and reductive As dissolution could be entirely inhibited in the methanogenic stage. Gene quantification and bacterial community analysis showed that in contrast to applied voltage, ZVI changed the spatial heterogeneity of the distribution of electroactive microorganisms in the BES, significantly decreasing the relative abundance of arrA and dissimilatory As/Fe-reducing bacteria (e.g., Geobacter) while increasing the abundance of aceticlastic methanogens (Methanosaeta), which then dominated CH₄ production and As immobilization after ZVI incorporation. In addition to biogeochemical activities, coprecipitation with ferric (iron) contributed 77-93% dissolved As removal under ZVI addition. This study will enhance our knowledge of the processes and microorganisms controlling soil As migration and CH₄ emission.

Speciation of inorganic arsenic with mixed mode HPLC-ESI-MS and Arsenite Oxidation

It has been challenging to analyze inorganic arsenic (iAs) with anion exchange HPLC-Electrospray Ionization-Mass spectrometry (HPLC-ESI-MS), because arsenite (As(III)) is difficult to retain on column and the salts in mobile phase causes ionization suppression of iAs. To address these issues, a method has been developed involving the determination of arsenate (As(V)) with mixed mode HPLC-ESI-MS and the conversion of As(III) to As(V) for total iAs. As(V) was separated from other chemicals on Newcrom B, a bi-modal HPLC column involving anion exchange and reverse phase interaction. The elution employed a two-dimensional gradient, including a formic acid gradient to elute As(V) and a concurrent alcohol gradient to elute organic anions used in sample preparations. As(V) was detected by Selected Ion Recording (SIR) in negative mode at m/z = 141 with a QDa (single quad) detector. As(III) was quantitatively converted to As(V) by mCPBA oxidation and measured for total iAs. By replacing salt with formic acid in elution, the ionization efficiency for As(V) was greatly enhanced in ESI interface. The limit of detection (LOD) for As(V) and As(III) were 0.0263 μM (1.97 ppb) and 0.0398 μM (2.99 ppb), respectively. The linear range was 0.05-1 μM. The method has been used to characterize iAs speciation change in the solution and precipitation in a simulated iron-rich groundwater caused by air exposure.

Aqueous phase synthesis of ion-imprinted cryogel for paper-based colorimetric detection of As(V) with high selectivity

A novel hydrophilic As(V) ion-imprinted cryogel (IIC) was green prepared by cryogelation in aqueous environment which was coincident with the adsorption condition and can improve the specific recognition performance. The methacrylamido propyl trimethyl ammonium chloride (MPTAC) was selected as the functional monomer and the saturated adsorption capacity of the prepared IIC and NIC were 55.0 mg/g and 29.4 mg/g, and with high imprinting factor of 1.87. Additionally, the prepared IIC showed admirable reusability and high selectivity, and the recovery was in the range 81.2-97.9% with RSD range of 1.9-4.3%, which was similar to the value obtained by hydride generation atomic absorption spectrometry. IIC can be used as solid material for colorimetric detection at the ultraviolet wavelength of 858 nm without color interference of material matrix, in the range 5-200 μg/L (R² = 0.990) with a detection limit of 0.970 µg/L. Obviously, this synthetic strategy provides a simple, efficient, and green method for the preparation of water-compatible ion-imprinted polymers providing selective separation and detection of trace As(V) in real complex samples.

As(III) oxidation and kinetic analysis by Herminiimonas arsenicoxydans-loaded electrospinning activated carbon fiber biofilms

In this study, an integrated and assembled recyclable biofilm material was prepared by loading Herminiimonas arsenicoxydans (H. arsenicoxydans) onto electrospun biomass-activated carbon nanofibers (denoted as H. arsenicoxydans-BACFs films). The H. arsenicoxydans-BACFs biofilms showed an approximately 50% increase in As(III) removal rate for 50 mg/L during a 48-h incubation. Furthermore, the biofilms demonstrated satisfactory biocompatibility, ideal catalytic As(III) oxidation and excellent recyclability in cyclic reactions (at least 5 runs). The improved catalytic efficiency is mainly due to a large amount of biomass accumulation and biofilms formation on the surface of the BACF films. More important, the BACF films as an electron transport medium from an oxidized state to a reduced state promote the electron transfer of As(III) oxidation of H. arsenicoxydans. The dual factors can synergistically promote As(III) oxidation efficiency. The oxidation process of As(III) in the H. arsenicoxydans-BACFs composite biofilm reactor was more in line with the first-order kinetic equation, and the oxidation rate of As(III) by H. arsenicoxydans-BACF_0.4 was the fastest. The H. arsenicoxydans-BACF films outperformed conventional catalytic materials and could represent biomaterials for the remediation of As(III)-contaminated wastewater.

Nanostructured electrochemical sensor applied to the electrocoagulation of arsenite in WWTP effluent

A sensitive electroanalytical method for the determination of arsenite, based on a heterostructure of aminated multiwalled carbon nanotubes and gold nanoparticles, was applied in an electrocoagulation (EC) treatment for the elimination of arsenite. A sensitive quantitative response was obtained in the determination of As³⁺ in a secondary effluent from a wastewater treatment plant from Santiago (Chile). The preconcentration stage was optimized through a Central Composite Face design, and the most sensitive peak current was obtained at 200 s and -600 mV of time and accumulation potential, respectively, after a differential pulse voltammetry sweep. Electroanalytical determination was possible in an interval between 42.89 and 170.00 μg L^-1 with a detection limit of 0.39 μg L^-1, obtaining recoveries over 99.1%. The developed method was successfully applied in an electrocoagulation treatment to remove 250 μg L^-1 of arsenite from a polluted effluent in a batch system. Complete arsenite removal was achieved using a steel EC system with a current density of 6.0 mA cm^-2 in less than 3 min of treatment.

Cell-free arsenic biosensors with applied nanomaterials: critical analysis

Arsenic is a ubiquitously found metalloid in our ecosystem because of natural and anthropogenic activities. People exposed to a higher level of arsenic become susceptible to several disorders, including cancer. According to current statistics, the population chronically exposed to arsenic has surpassed 200 million. Therefore, its detection in our environment is of great importance. There are many analytical techniques for the assessment of arsenic in different kinds of environmental samples. Among these techniques, the biosensor is considered a convenient platform and a widely applied analytical device for rapid qualitative and quantitative analysis in the field of environmental monitoring, food safety, and disease diagnosis. Today, there is a trend of including nanomaterials in sensors and biosensors because it empowers researchers to explore new arsenic detection methods and to enhance their analytical capabilities. In this review article, we summarized the latest developments in arsenic biosensors in particular with emphasis on the works based on cell-free approaches that are protein/enzyme-based, DNA-based, and aptamer-based utilizing various transduction platforms. In the meantime, we compared the capabilities that were related to these cell-free arsenic biosensors. This review article also highlights the development and application of novel nanomaterials for arsenic detection.

Speciation of inorganic arsenic in aqueous samples using a novel hydride generation microfluidic paper-based analytical device (µPAD)

The development of the first microfluidic paper-based analytical device (µPAD) for the speciation of inorganic arsenic in environmental aqueous samples as arsenite (As(III)) and arsenate (As(V)) which implements hydride generation on a paper platform is described. The newly developed µPAD has a 3D configuration and uses Au(III) chloride as the detection reagent. Sodium borohydride is used to generate arsine in the device’s sample zone by reducing As(III) in the presence of hydrochloric acid or both As(III) and As(V) (total inorganic As) in the presence of sulfuric acid. Arsine then diffuses across a hydrophobic porous polytetrafluoroethylene membrane into the device’s detection zone where it reduces Au(III) to Au nanoparticles. This results in a color change which can be related to the concentration of As(III) or total inorganic As (i.e., As(III) and As(V)) concentration. Under optimal conditions, the µPAD is characterized by a limit of detection of 0.43 mg L⁻¹ for total inorganic As (As(III) + As(V)) and 0.41 mg L⁻¹ for As(III) and a linear calibration range in both cases of 1.2–8.0 mg As L⁻¹. The newly developed µPAD-based method was validated by applying it to groundwater and freshwater samples and comparing the results with those obtained by conventional atomic spectrometric techniques.

High-Density and Monodisperse Electrochemical Gold Nanoparticle Synthesis Utilizing the Properties of Boron-Doped Diamond Electrodes

Owing to its simplicity and sensitivity, electrochemical analysis is of high significance in the detection of pollutants and highly toxic substances in the environment. In electrochemical analysis, the sensitivity of the sensor and reliability of the obtained signal are especially dependent on the electrode characteristics. Electrodes with a high density of nanomaterials, which exhibit excellent activity, are useful as sensor substrates for pollutant detection. However, the effective placement of high-density nanomaterials requires a high degree of control over the particle size, particle shape, and distance between the particles on the substrate. In this study, we exploited the properties of boron-doped diamond (BDD) electrodes, which have a wide potential window, and succeeded in coating a highly dense layer of gold nanoparticles (AuNPs) at high potential. The AuNP-modified BDD (AuNP-BDD) electrodes comprising less than 100 nm AuNPs at a density of 125 particles/µm were electrochemically synthesized over a short period of 30-60 s. The AuNP-BDD electrodes were applied for detecting arsenic, which is one of the most abundant elements, and exhibited a limit of detection of 0.473 ppb in solution.

Recent Advances in Aggregation-Induced Emission Active Materials for Sensing of Biologically Important Molecules and Drug Delivery System

The emergence and development of aggregation induced emission (AIE) have attracted worldwide attention due to its unique photophysical phenomenon and for removing the obstacle of aggregation-caused quenching (ACQ) which is the most detrimental process thereby making AIE an important and promising aspect in various fields of fluorescent material, sensing, bioimaging, optoelectronics, drug delivery system, and theranostics. In this review, we have discussed insights and explored recent advances that are being made in AIE active materials and their application in sensing, biological cell imaging, and drug delivery systems, and, furthermore, we explored AIE active fluorescent material as a building block in supramolecular chemistry. Herein, we focus on various AIE active molecules such as tetraphenylethylene, AIE-active polymer, quantum dots, AIE active metal-organic framework and triphenylamine, not only in terms of their synthetic routes but also we outline their applications. Finally, we summarize our view of the construction and application of AIE-active molecules, which thus inspiring young researchers to explore new ideas, innovations, and develop the field of supramolecular chemistry in years to come.

Multivariate Analysis and Machine Learning Approach for Mapping the Variability and Vulnerability of Urban Flooding: The Case of Tangier City, Morocco

Urban flooding is a complex natural hazard, driven by the interaction between several parameters related to urban development in a context of climate change, which makes it highly variable in space and time and challenging to predict. In this study, we apply a multivariate analysis method (PCA) and four machine learning algorithms to investigate and map the variability and vulnerability of urban floods in the city of Tangier, northern Morocco. Thirteen parameters that could potentially affect urban flooding were selected and divided into two categories: geo-environmental parameters and socio-economic parameters. PCA processing allowed identifying and classifying six principal components (PCs), totaling 73% of the initial information. The scores of the parameters on the PCs and the spatial distribution of the PCs allow to highlight the interconnection between the topographic properties and urban characteristics (population density and building density) as the main source of variability of flooding, followed by the relationship between the drainage (drainage density and distance to channels) and urban properties. All four machine learning algorithms show excellent performance in predicting urban flood vulnerability (ROC curve > 0.9). The Classifications and Regression Tree and Support Vector Machine models show the best prediction performance (ACC = 91.6%). Urban flood vulnerability maps highlight, on the one hand, low lands with a high drainage density and recent buildings, and on the other, higher, steep-sloping areas with old buildings and a high population density, as areas of high to very-high vulnerability.

Effects of anode/cathode electroactive microorganisms on arsenic removal with organic/inorganic carbon supplied

This study reports the effects of an external voltage (0 V, 0.4 V and 0.9 V) on soil arsenic (As) release and sequestration when amended with organic carbon (NaAc) and inorganic carbon (NaHCO₃), respectively, in a soil bioelectrochemistry system (BES). The results demonstrated that although an external voltage had no effect on the As removal capacity in an oligotrophic environment fueled with NaHCO_3, 93.6% of As(III) in the supernatant was removed at 0.9 V with an NaAc amendment. Interestingly, the content of As detected on the electrodes was higher than that removed from the supernatant, implying a continuous release of soil As under external voltages and rapid adsorption onto the electrodes, especially the cathode. In addition, the species of As on the cathode were similar to those in the supernatant (the As(III)/As(V) ratio was approximately 3:1), indicating that the removal capacity was independent of preoxidation. From the viewpoint of electroactive microorganisms (EABs), the relative abundances of the arrA gene and Geobacter genus were specifically enriched at the anode, thus signifying stimulation of the reduction and release of soil As in the anode region. By comparison, Bacillus was particularly abundant at the cathode, which could contribute to the oxidation and sequestration of As in the cathode region. Additionally, specific extracellular polymeric substances (EPSs) secreted by EABs could combine with As, which was followed by electrostatic attraction to the cathode under the effect of an electric field. Furthermore, the formation of secondary minerals and coprecipitation in the presence of iron (Fe) may have also contributed to As removal from solution. The insights from this study will enable us to further understand the biogeochemical cycle of soil As and to explore the feasibility of in situ As bioremediation techniques, combining the aspects of microbial and physicochemical processes in soil bioelectrochemical systems.

A novel copper (II) binding peptide for a colorimetric biosensor system design

Filamentous bacteriophages are viruses infecting only bacteria. In this study, phage display technique was applied to identify highly selective Cu(II) binding peptides. After five rounds of positive screening against Cu(II) and various rounds of negative screenings against competitive metal ions (Al(III), Co(II), Fe(III), Ni(II) and Zn(II)), bacteriophages were enriched. Selective Cu(II) binding of final phages was confirmed by Enzyme Linked Immunosorbent Assay (ELISA), Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray spectroscopy (EDX) analyses. 15 phage plaques were randomly selected and sequenced. Cu-5 peptide (HGFANVA) with the highest frequency of occurrence and the strongest Cu(II) affinity was chosen for further Cu(II) detection and removal tests. Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) confirmed the strong Cu(II) binding potential of engineered viruses. Cu-5 peptides were synthetically synthesized with three Cysteine units at C-terminal and a AuNP-peptide biosensor system was developed based on aggregation behavior of AuNPs upon Cu(II) ion treatment. AuNP-based Cu(II) sensor was selective for Cu(II) and the LOD was 91.15 nM (ca. 5.8 × 10^-3 mg/L; 3σ/k, n = 5, R² = 0.992) for the case study which is considerably lower than the WHO's accepted guideline of 1.3 mg/L. This study provides an interdisciplinary approach to apply short peptides as recognition units for biosensor studies which are user friendly, not bulky and cost-effective.

Aggregation Induced Emissive Luminogens for Sensing of Toxic Elements

The major findings in the growing field of aggregation induced emissive (AIE) active materials for the detection of environmental toxic pollutants have been summarized and discussed in this Review article. Owing to the underlying photophysical phenomenon, fluorescent AIE active molecules show more impact on sensing applications. The major focus in current research efforts is on the development of AIE active materials such as TPE based organic fluorescent molecules, metal organic framework, and polymers that can be employed for the detection of toxic pollutants such as CN- , NO2- , Hg2+ , Cd2+ , As3+ , As5+ , F- , Pb2+ , Sb3+ ions.

One-pot construction of acid phosphatase and hemin loaded multifunctional metal-organic framework nanosheets for ratiometric fluorescent arsenate sensing

Exploring high-performance sensors for toxic arsenic detection is highly desired because of its great threat to the environment. Herein, we report a ratiometric fluorescent biosensor based on acid phosphatase and hemin loaded multifunctional Zn-based metal-organic framework (ACP/hemin@Zn-MOF) for high-performance arsenate (As(Ⅴ)) sensing. ACP/hemin@Zn-MOF is constructed by self-assembly, where hemin exhibits peroxidase-like activity and 2-aminoterephthalic acid ligand endows ACP/hemin@Zn-MOF with an intrinsic fluorescence (452 nm). When ACP/hemin@Zn-MOF catalyzes the oxidation of o-phenylenediamine (OPD), fluorescent 2,3-diaminophenazine (DAP) with an emission signal (564 nm) is produced and weakens ACP/hemin@Zn-MOF intrinsic fluorescence (452 nm) due to inner filter effect; after adding ascorbic acid 2-phosphate (AAP), ACP can hydrolyze AAP and produce ascorbic acid, which competitively suppresses the oxidation of OPD, resulting in the decrease of DAP signal (564 nm) and the recovery of ACP/hemin@Zn-MOF signal (452 nm); when As(V) is added, it irreversibly poisons ACP against hydrolyzing AAP, and the fluorescence signal at 564 nm recovers and the one at 452 nm is suppressed again. High-sensitivity and high-selectivity detection of As(V) (3.33-300 μg L^-1) is realized, with a detection limit of 1.05 μg L^-1. The biosensor was also successfully employed to detect total arsenic and As(V) in rice.

Recent development of chromogenic and fluorogenic chemosensors for the detection of arsenic species: Environmental and biological applications

Due to biological and environmental significance of highly toxic arsenic species, the design, synthesis and development of chemosensors for arsenic species has been a very active research field in recent times. In this review, we summarize recent works on the sensing mechanisms employed by fluorometric/colorimetric chemosensors and their applications in arsenic detection. Various types of sensing strategies can be categorized into six types including (i) chemosensors based on hydrogen bonding interactions; (ii) aggregation induced emission (AIE) based chemosensors; (iii) chemodosimetric approach (reaction-based chemosensors); (iv) metal coordination-based sensing strategy; (v) chemosensors based on metal complex displacement approach and (vi) metal complex as chemosensor. All these sensing strategies are very much simple and sensitive for use in the design of arsenic selective chromogenic and fluorogenic probes.

Nano-Enabled sensors for detection of arsenic in water

The elevated cases of arsenic contamination reported across the globe have made its early detection and remediation an active area of research. Although, the World Health Organisation has set the maximum provisional value for arsenic in drinking water at 10 parts per billion, yet concentrations as high as 5000 parts per billion are still reported. In human beings, chronic arsenic exposure can culminate into lethal diseases such as cancer. Thus, there is a need for urgent emergence of efficient and reliable detection system. This paper offers an overview of the state-of-art knowledge on current arsenic detection mechanisms. The central agenda of this paper is to develop an understanding into the nano-enabled methods for arsenic detection with an emphasis on strategic fabrication of nanostructures and the modulation of nanomaterial chemistry in order to strengthen the knowledge into novel nano-enabled solutions for arsenic contamination. Towards the end prospects for arsenic detection in water are also prompted.

A portable and field optical emission spectrometry coupled with microplasma trap for high sensitivity analysis of arsenic and antimony simultaneously

In this work, a portable and reliable optical emission spectrometric (OES) instrument based on solid acid hydride generation (HG) and subsequent in situ dielectric barrier discharge (DBD) preconcentration was first developed for simultaneous and field analysis of ultratrace As and Sb in environmental water. In situ DBD fulfilled both gas phase enrichment (GPE) and excitation; effective enrichment made it possible to use a low-cost charge coupled device (CCD) as detector. To simplify field protocol, solid tablet made from sulfamic acid was first used to replace hydrochloric acid for co-generation of As and Sb hydrides. Moisture interference was eliminated by carrier gas sweeping without any desiccant. After calculating peak volume for emission data handling, detection limits (LODs) were 0.5 μg L^-1 for As and 0.2 μg L^-1 for Sb, respectively, with <3% relative standard deviations (RSDs) at 10 μg L^-1; linear dynamic ranges (R²>0.995) were 2-200 μg L^-1 for As and 1-200 μg L^-1 for Sb, respectively. The results agreed with certified values of CRMs and recoveries were 87-97% vs. inductively coupled plasma mass spectrometry. The running costs can be controlled within one dollar per use. This HG-in situ DBD trap-OES scheme, with demonstrated advantages in sensitivity, low-cost, power (<60 W), size (0.6 m × 0.5 m × 0.3 m), weight (15 kg), gas consumption (300 measurements per 4 L tank), and multi-element capability, was implemented in a miniature spectrometer for field analysis.

Evaluation of arsenic field test kits for drinking water: Recommendations for improvement and implications for arsenic affected regions such as Bangladesh

Arsenic field test kits are widely used to measure arsenic levels in drinking water sources, especially in countries like Bangladesh, where water supply is highly decentralized and water quality testing infrastructure is limited. From a public health perspective, the ability of a measurement technique to distinguish samples above and below relevant and actionable drinking water standards is paramount. In this study, the performance of eight commercially available field test kits was assessed by comparing kit estimates to hydride generation atomic absorption spectroscopy (HG-AAS) analyses. The results of tests that control for user-dependent color matching errors showed that two kits (LaMotte and Quick II kits) provided accurate and precise estimates of arsenic, four kits (Econo-Quick, Quick, Wagtech and Merck kits) were either accurate or precise, but not both, and two kits (Hach and Econo-Quick II kits) were neither accurate nor precise. Tests were performed for arsenic concentration ranges commonly found in natural waters and treated waters (such as community drinking water filter systems), and also on laboratory generated arsenic standards in DI water. For those kits that did not perform well, test strips often produced colors too light compared to manufacturer-provided arsenic color calibration charts. Based on these results, we recommend stakeholders carefully re-consider the use of poorly performing field test kits until better quality control of components of these kits is implemented. In addition, we recommend that field test kit manufacturers provide suitable internal standards in every kit box for users to verify the veracity of manufacturer provided color charts.

Masking Phosphate with Rare-Earth Elements Enables Selective Detection of Arsenate by Dipycolylamine-ZnII Chemosensor

Functional reassessment of the phosphate-specific chemosensors revealed their potential as arsenate detectors. A series of dipicolylamine (Dpa)-ZnII chemosensors were screened, among which acridine Dpa-ZnII chemosensor showed the highest capability in sensing arsenate. The presence of excess ZnII improved sensitivity and strengthened the binding between acridine Dpa-ZnII complex to arsenate as well as phosphate. However, due to their response to phosphate, these sensors are not suited for arsenate detection when phosphate is also present. This study demonstrated for the first time that rare-earth elements could effectively mask phosphate, allowing the specific fluorescence detection of arsenate in phosphate-arsenate coexisting systems. In addition, detection of arsenate contamination in the real river water samples and soil samples was performed to prove its practical use. This sensor was further employed for the visualization of arsenate and phosphate uptake in vegetables and flowering plants for the first time, as well as in the evaluation of a potent inhibitor of arsenate/phosphate uptake.

Nanomaterials in speciation analysis of metals and metalloids

Nanomaterials have draw extensive attention from the scientists in recent years mainly due to their unique and attractive thermal, mechanical and electronic properties, as well as high surface to volume ratio and the possibility for surface functionalization. Whereas mono functional nanomaterials providing a single function, the preparation of core/shell nanoparticles allows different properties to be combined in one material. Their properties have been extensively exploited in different extraction techniques to improve the efficiency of separation and preconcentration, analytical selectivity and method reliability. The aim of this paper is to provide an updated revision of the most important features and application of nanomaterials (metallic, silica, polymeric and carbon-based) for solid phase extraction and microextraction techniques in speciation analysis of some metals and metalloids (As, Cr, Sb, Se). Emphasis will be placed on the presentation of the most representative works published in the last five years (2015-2019).

Enhanced selective removal of arsenic(V) using a hybrid nanoscale zirconium molybdate embedded anion exchange resin

Selective removal of trace arsenic is crucial for obtaining safe drinking water. Here, the selective adsorptive performance of arsenate (As(V)) on a hybrid ZMAE (nanoscale zirconium molybdate embedded a macroporous anion exchange resin) was examined. It was found that the As(V) adsorption efficiency of ZMAE was almost retained in the presence of competing ions (NO₃^- or SO₄^2-) up an [SO₄^2-]/[As] or [NO₃^-]/[As] ratio of 150/1, whereas that of bare AE (anion exchange resin) was negligible for [SO₄]/[As] over 15/1. In addition, the As(V) maximum adsorption capacity of ZMAE was found to be 41.2 mg/g, which is in contrast with the negligible adsorption of bare AE under sulfate-rich condition. The enhanced arsenate selectivity of ZMAE can be attributed to the excellent selectivity of ZM NPs (zirconium molybdate nanoparticles), which contributed up to 45% of the adsorption capacity of ZMAE. The behavior of ZMAE towards arsenate was compared with that towards phosphate showing similar adsorption performances between them, which indicates the similar affinity of ZMAE towards arsenate and phosphate. Finally, ZMAE examined for fixed-bed column adsorption for As(V) removal from synthetic As(V) water was effective for up to 5100 BVs, treating As(V) from 0.1 mg/L to below 0.01 mg/L (meeting the WHO guidelines).

A Schiff base modified graphene oxide film for anodic stripping voltammetric determination of arsenite

A protocol is described for chemical modification of graphene oxide with a Schiff base derived from diethylenetriamine and 2-hydroxy-4-methoxybenzophenone. The base was grafted onto an indium tin oxide (ITO) film and applied to electroanalytical determination of arsenite. Successful grafting was confirmed by Fourier transform-infrared spectroscopy, spectrophotometry, field emission scanning electron microscopy and cyclic voltammetry. Secondly, the coated ITO film served as a working electrode for the stripping voltammetric determination of arsenite. The analytical signal is generated by selective oxidation of metal species via multi-donor sites present in the derivatized Schiff base. The electroanalytical protocol was optimized by investigating the effects of deposition time, working potential, frequency and amplitude of square wave anodic stripping voltammetry. The method has attractive features including (a) the usage of a non-metallic, non-toxic and cost-effective material; (b) improved sensitivity (with limit of detection as low as 156 pM) due to better adsorption of arsenite in the Schiff base pockets on the ITO, and (c) the application to the determination of arsenite in real samples. Graphical abstract Schematic representation of the fabrication of a Schiff base-functionalized graphene oxide on an indium tin oxide (SB@SiO2@GO@ITO) electrode for selective electrochemical sensing of arsenite due to adsorption on multi-donor sites.

Dissolved arsenic in the upper Paraguay River basin and Pantanal wetlands

Although high levels of dissolved arsenic were detected in surface and ground waters of Nhecolândia, a sub-region of the vast Pantanal wetlands in Brazil, the possible sources have not been clearly identified and the potential release from the wetland to the draining rivers has not been investigated. In this study we measured the dissolved As content in all the rivers and small streams that supply the southern Pantanal region, as well as in the two main rivers draining the wetland, i.e., the Cuiaba and Paraguay rivers and tributaries. In addition, Arsenic in surface waters, perched water-table, soils and sediments from 3 experimental sites located in the heart of Nhecolândia were compared. On the one hand, the results show the absence of As contamination in rivers that supply the Pantanal floodplain, as well as a lack of significant release from the floodplain to the main drains. The As contents in the rivers are <2 μg L^-1, with variations that depend on the lithology and on the geomorphology at the collection point (uplands or floodplain). On the other hand, they confirm the regional extension of As contamination in Nhecolândia's alkaline waters with some values above 3 mg L^-1. Arsenic is mainly in the arsenate form, and increases with the evaporation process estimated from sodium ion concentrations. The pH of soil solution and surface water increases rapidly during evapo-concentration up to values above 9 or 10, preventing adsorption processes on oxides and clay minerals and promoting the retention of dissolved arsenic in solution. Solutions from organic soil horizons show higher As contents in relation to Na, attributed to the formation of ternary complex As-(Fe/Al)-OM. In this alkaline pH range, despite high levels of dissolved As, soil horizons and lake sediments in contact with these waters show As values that correspond to uncontaminated environments.

A disposable acetylcholine esterase sensor for As(III) determination in groundwater matrix based on 4-acetoxyphenol hydrolysis

There is a lack of field compatible analytical method for the speciation of As(III) to characterize groundwater pollution at anthropogenic sites. To address this issue, an inhibition-based acetylcholine esterase (AchE) sensor was developed to determine As(III) in groundwater. 4-Acetoxyphenol was employed to develop an amperometric assay for AchE activity. This assay was used to guide the fabrication of an AchE sensor with screen-printed carbon electrode. An As(III) determination protocol was developed based on the pseudo-irreversible inhibition mechanism. The analysis has a dynamic range of 2-500 μM (150 - 37,500 μg L^-1) for As(III). The sensor exhibited the same dynamic range and sensitivity in a synthetic groundwater matrix. The electrode was stable for at least 150 days at 22 ± 2 °C.

Arsenic in Argentina: Occurrence, human health, legislation and determination

An overview about the presence of arsenic (As) in groundwaters of Argentina, made by a transdisciplinary group of experts is presented. Aspects on As occurrence, effects of As on human health, regulations regarding the maximum allowable amount of As in drinking water as well as bottled water, and analytical techniques for As determination are presented. The most affected region in Argentina is the Chaco-Pampean plain, covering around 10 million km², where approximately 88% of 86 groundwater samples collected in 2007 exceeded the World Health Organization (WHO) guideline value. In the Salí river basin, As concentrations ranged from 11.4 to 1660 μg/L, with 100% of the samples above the WHO guideline value. In the Argentine Altiplano (Puna) and Subandean valleys, 61% of 62 samples collected from surface and groundwaters exceeded the WHO limit. Thus, it can be estimated that, at present, the population at risk in Argentina reaches around four million people. Pathologies derived from the chronic consumption of As, the metabolism of As in the human body and the effects of the different As chemical forms, gathered under the name HACRE (hidroarsenicismo crónico regional endémico in Spanish, for chronic regional endemic hydroarsenicism) are described. Regarding the regulations, the 10 μg/L limit recommended by the WHO and the United States Environmental Protection Agency has been incorporated in the Argentine Food Code, but the application is still on hold. In addition, there is disparity regarding the maximal admitted values in several provinces. Considerations about the As concentrations in bottled water are also presented. A survey indicates that there are several Argentine laboratories with the suitable equipment for As determination at 10 μg/L, although 66% of them are concentrated in Buenos Aires City, and in the Santa Fe, Córdoba and Buenos Aires provinces. Conclusions and recommendations of this first part are provided.

Development of a simple analytical method to determine arsenite using a DNA aptamer and gold nanoparticles

A simple analytical method was developed to determine the arsenite (As(III)) concentration using a DNA aptamer and gold nanoparticles (AuNPs). Prior to sample measurements, the method sensing mechanism was confirmed by analyzing the particle size of the AuNPs at each step of the analysis procedure, and the key operational parameters that affect the method performance were optimized. The optimal final NaCl concentration, incubation time with NaCl and pH of a 3-(N-morpholino) propanesulfonic acid buffer were 60 mM, 10 min and 7.3, respectively. A calibration curve was created under optimized operational conditions. The calibration curve was linear from a 1.0- to 10-μM As(III) concentration. The detection limit was 2.1 μM (161 μg/L). Using the calibration curve, we evaluated groundwater samples spiked with As(III). As(III) concentrations in groundwater pretreated with a 0.2-μm-pore-size membrane filter and cation-exchange resin were determined by using the method, which suggests that the proposed method can be used to determine the As(III) concentration in groundwater.

K. S, Ghosh D. Arsenic Exposures, Poisoning, and Threat to Human Health

Arsenic (As) is a naturally occurring metalloid which induces high toxicity to both human and animal health. Although As has some applications in industrial, medicinal and agricultural fields, the increasing concentrations of As in drinking water sources had made it a potential threat to living organisms. Inorganic As is naturally present in groundwater and is adsorbed by plants and crops through the irrigation system. This leads to its accumulation in crops and translocation to humans and animals through food. Increased levels of As can cause various health disorders through acute and chronic exposures such as gastrointestinal, hepatic, respiratory, cardiovascular, integumentary, renal, neurological, and reproductive disorders including stillbirth and infant mortality. Arsenic is also capable of inducing epigenetic changes, thereby causing gene mutations. This chapter focuses on the possible sources of As, leading to environmental contamination and followed by its hazardous effects which pave the way to various human health manifestations.

Simultaneous biosorption of Arsenic (III) and Arsenic (V): Application of multiple response optimizations

In this work, simultaneous biosorption of As(III) and As(V) by Sargassum glaucescens was optimized using multiple response optimizations and Doehlert experimental design. The optimum condition for simultaneous biosorption of As(III) and As(V) were: biosorbent dosage 0.47 g L-1, pH 5.9 and initial concentration 120.34 mg L-1 with maximum overall desirability of 0.94. Different isotherms were fitted to biosorption equilibrium data and the Freundlich isotherm was the most suitable model. Based on thermodynamic study, the biosorption of arsenic species onto alga was endothermic and spontaneous. Kinetic results indicated that intraparticle diffusion model was the best kinetic model. Biosorption capacity of S. glaucescens and other biosorbents were also compared.

Spatio-Temporal Analysis of Natural and Anthropogenic Arsenic Sources in Groundwater Flow Systems

The presence of arsenic in groundwater constitutes a hazard for the environment and human health, and the determination of its source has become a global challenge, which can be approached by defining the natural background levels (NBL) in conjunction with the indicator kriging method, with the aim of delineating anthropogenically contaminated areas. However, having a unique value of NBL for large areas can generate interpretation errors. This research integrates the determination of the flow systems present in the Calera Aquifer, and the definition of the natural background levels in each flow system by making estimation maps in ArcGIS using two databases, 10 years apart, to evaluate the spatio-temporal variation of arsenic in groundwater. The results indicate a notable increase in the probability of exceeding the arsenic NBL, mainly in the intermediate flow, which may be due to movement resulting from mining activities as well as a mixture of regional and intermediate flows caused by the extraction of water for agriculture and drinking water supplies. The presented values exceed the maximum limits allowed for human consumption, as stated by the World Health Organization.

A Colorimetric Probe Based on Functionalized Gold Nanorods for Sensitive and Selective Detection of As(III) Ions

A colorimetric probe for determination of As(III) ions in aqueous solutions on basis of localized surface plasmon resonance (LSPR) was synthesized. The dithiothreitol molecules with two end thiols covalently combined with Au Nanorods (AuNRs) with an aspect ratio of 2.9 by Au-S bond to form dithiothreitol coated Au Nanorods (DTT-AuNRs), acting as colorimetric probe for the determination of As(III) ions. With the adding of As(III) ions, the AuNRs will be aggregated and leading the longitudinal SPR absorption band of DTT-AuNRs decrease due to the As(III) ions can bind with three DTT molecules through an As-S linkage. The potential factors affect the response of DTT-AuNRs to As(III) ions including the concentration of DTT, pH values of DTT-AuNRs, reaction time and NaCl concentration were optimized. Under optimum assay conditions, the DTT-AuNRs colorimetric probe has high sensitivity towards As(III) ions with low detection limit of 38 nM by rules of 3σ/k and excellent linear range of 0.13–10.01 μM. The developed colorimetric probe shows high selectivity for As(III) ions sensing and has applied to determine of As(III) in environmental water samples with quantitative spike-recoveries range from 95.2% to 100.4% with low relative standard deviation of less than 4.4% (n = 3).

Simultaneous application of oxalic acid and dithionite for enhanced extraction of arsenic bound to amorphous and crystalline iron oxides

To extract As bound to amorphous and crystalline iron oxides, this study proposed simultaneous application of oxalic acid and dithionite, which was observed to induce synergistic effect and accomplish effective extraction of As bound to both iron oxides. However, the formation of arsenic sulfide decreased overall removal of As because the insoluble precipitate form of As remained as a residual fraction of As in soil. Therefore, stepwise addition of dithionite in the simultaneous application was applied to minimize the formation of secondary minerals and maximize the As extraction. As a result, 74% of As bound to amorphous iron oxides and 65% of As bound to crystalline iron oxides were removed. More importantly, the stepwise application of oxalic acid and dithionite was effective to reduce the bioaccessible concentration of As in the treated soil. Therefore, the proposed application could reduce the potential risk of contaminated soil to human health by extraction-based remedial action.