Tandem air-agitated liquid–liquid microextraction as an efficient method for determination of acidic drugs in complicated matrices

Preparation of cationic microporous organic network for efficient solid-phase extraction of nonsteroidal anti-inflammatory drugs from environmental water and milk samples

The overuse of nonsteroidal anti-inflammatory drugs (NSAIDs) poses many serious environmental and food safety concerns. Development of effective and sensitive sample pretreatment method for monitoring trace NSAIDs from complex samples is of great significance. Depending on the ionic and aromatic structures of NSAIDs, a cationic microporous organic network (MON) named TEPM-BBDC with large specific surface area, good solvent and thermal stabilities, and numerous interaction sites was designed and prepared for efficient solid-phase extraction (SPE) of four typical NSAIDs (flurbiprofen, ketoprofen, naproxen, and diclofenac sodium) from environmental water and milk samples. By anchoring the ionic groups in the conjugated MON frameworks, the prepared TEPM-BBDC offered good extraction for NSAIDs based on the π-π, hydrophobic, ion exchange, and electrostatic interactions. Under the optimal extraction conditions (initial concentration of each NSAID: 200 g L-1; sample volume: 50 mL; desorption solvent: 1.5 mL of MeOH + 1 % NH3·H2O; sample loading rate: 5 mL min-1; NaCl concentration: 0 mmol L-1; pH = 5), the proposed TEPM-BBDC-SPE-HPLC-UV method owned wide linear range (0.50-1000 g L-1), low limits of detection (0.10-0.40 g L-1), large enrichment factors (92.2-99.2), good precisions (intra-day and inter-day, RSD% = 1.3-7.8 %, n = 6) and reproducibility (column-to-column, RSD% = 8.0 %, n = 3). The developed method also exhibited good recoveries (83.6-113.4 %) for the determination of NSAIDs in river water, lake water and milk samples. This work not only revealed the potential of TEPM-BBDC for SPE of ionic NSAIDs in complex samples, but also highlighted the prospect of ionic MONs in sample pretreatment.

Non-steroidal anti-inflammatory drugs (NSAIDs) in the environment: Updates on pretreatment and determination methods

Non-steroidal anti-inflammatory drugs (NSAIDs) are widely used in human and animal health care to reduce persistent inflammation, pain and fever because of their anti-inflammatory, analgesic and antipyretic effects. However, the improper discharge and disposal make it becomes a major contaminant in the environment, which poses a big threat to the ecosystem. For this reason, accurate, sensitive, effective, green, and economic techniques are urgently required and have been rapidly developed in recent years. This review summarizes the advancement of sample preparation technologies for NSAIDs involving solid-phase extraction, solid-phase microextraction, liquid-phase microextraction, QuEChERS, and matrix solid-phase dispersion. Meanwhile, we overview and compare analytical technologies for NSAIDs, including liquid chromatography-based methods, gas chromatography-based methods, capillary electrophoresis, and sensors, particularly the development of liquid chromatography-based methods. Furthermore, we focus on their progress and conduct a comparison between their advantages and disadvantages.

Vortex-assisted supramolecular solvent dispersive liquid–liquid microextraction of ketoprofen and naproxen from environmental water before chromatographic analysis: response surface methodology optimisation

A microextraction procedure that is rapid and simple to extract and preconcentrate ketoprofen and naproxen is proposed. An environmentally friendly supramolecular solvent was applied as an extraction solvent and proved to be efficient in the extraction of ketoprofen and naproxen from environmental water. The design of experiment approach was used to screen, optimize significant parameters, and determine optimum experimental conditions. Under optimized experimental conditions, the vortex-assisted supramolecular solvent dispersive liquid–liquid microextraction provided a good linearity (0.57–700 µg L−1), low limits of detection (0.17–0.24 µg L−1) and extraction reproducibility below 9%. The high percentage relative recoveries (93.6–101.4%) indicated that the method is not affected by matrix. The practical applicability of the method was assessed by analysing ketoprofen and naproxen in river water and effluent wastewater samples. Both analytes were found in effluent wastewater.

Rapid Determination of Non-Steroidal Anti-Inflammatory Drugs in Urine Samples after In-Matrix Derivatization and Fabric Phase Sorptive Extraction-Gas Chromatography-Mass Spectrometry Analysis

Fabric phase sorptive extraction (FPSE) has become a popular sorptive-based microextraction technique for the rapid analysis of a wide variety of analytes in complex matrices. The present study describes a simple and green analytical protocol based on in-matrix methyl chloroformate (MCF) derivatization of non-steroidal anti-inflammatory (NSAID) drugs in urine samples followed by FPSE and gas chromatography-mass spectrometry (GC-MS) analysis. Use of MCF as derivatizing reagent saves substantial amounts of time, reagent and energy, and can be directly performed in aqueous samples without any sample pre-treatment. The derivatized analytes were extracted using sol−gel Carbowax 20M coated FPSE membrane and eluted in 0.5 mL of MeOH for GC-MS analysis. A chemometric design of experiment-based approach was utilized comprising a Placket−Burman design (PBD) and central composite design (CCD) for screening and optimization of significant variables of derivatization and FPSE protocol, respectively. Under optimized conditions, the proposed FPSE-GC-MS method exhibited good linearity in the range of 0.1−10 µg mL−1 with coefficients of determination (R2) in the range of 0.998−0.999. The intra-day and inter-day precisions for the proposed method were lower than <7% and <10%, respectively. The developed method has been successfully applied to the determination of NSAIDs in urine samples of patients under their medication. Finally, the green character of the proposed method was evaluated using ComplexGAPI tool. The proposed method will pave the way for simper analysis of polar drugs by FPSE-GC-MS.

Recent modified air-assisted liquid–liquid microextraction applications for medicines and organic compounds in various samples: A review

Air-assisted liquid–liquid microextraction (AALLME) is a procedure for sample preparation that has high recoveries and high preconcentration factors while using a small amount of extractants. This procedure has gained widespread acceptance among scientists due to a variety of advantages, including its easiness, being cheap, green, and available in most laboratories. The current review has focused on the analysis of medicines and organic compounds using various modes of AALLME. The use of various extractants and support factors were developed in many modes of AALLME. A review of literature revealed that the procedure is used as a powerful and efficient approach for extracting medicals and organic compounds. This review explained 12 different types of AALLME methods. The findings on the modifications of AALLME modes that have been published are summarized. Future directions are also being discussed.

Fabrication of polyethyleneimine modified magnetic microporous organic network nanosphere for efficient enrichment of non-steroidal anti-inflammatory drugs from wastewater samples prior to HPLC-UV analysis

Development of novel functionalized adsorbents for efficient magnetic solid phase extraction (MSPE) is essential for promoting their versatile applications in sample pretreatment. Herein, we report the fabrication of a new polyethyleneimine-600 decorated magnetic microporous organic network nanosphere (Fe₃O₄@MON-PEI₆₀₀) for effective MSPE of trace non-steroidal anti-inflammatory drugs (NSAIDs) from different water samples. The core-shelled Fe₃O₄@MON-PEI₆₀₀ integrates the synergistic effects of Fe₃O₄, MON and PEI₆₀₀, providing facile and effective extraction to NSAIDs via multiple hydrogen bonding, π-π and hydrophobic interactions. The inner MON shell employs π-π and hydrophobic interaction sites and the outer PEI-600 coat acts as the hydrogen bonding doner/receptor, which affords good extraction performance for NSAIDs. Under optimal conditions, the Fe₃O₄@MON-PEI₆₀₀-MSPE-HPLC-UV method gives wide linear range (0.14-400 μg L^-1), low limits of detection (0.042-0.149 μg L^-1), good precisions (intra-day and inter-day RSDs < 4.5%, n = 6), and large enrichment factors (97.0-98.2). Extraction mechanisms and selectivity of Fe₃O₄@MON-PEI₆₀₀ are evaluated in detail. Moreover, Fe₃O₄@MON-PEI₆₀₀ is successfully applied to enrich the trace NSAIDs in different water samples with the concentrations of 0.7 and 0.8 μg L^-1 for 1-naphthylacetic acid, 0.5 and 0.1 μg L^-1 for naproxen as well as 0.7 μg L^-1 for ibuprofen, respectively. The developed method not only affords a novel and efficient magnetic adsorbent for NSAIDs in aqueous media at trace level, but also provides a new strategy for the rational design and synthesis of multiple functionalized MON composites in sample pretreatment.

Novel aqueous biphasic system based on ionic liquid for the simultaneous extraction of seven active pharmaceutical ingredients in aquatic environment

Nonsteroidal anti-inflammatory drugs and antibiotics are classes of active pharmaceutical ingredients (APIs), which are continuously contaminating the ecosystem through various anthropogenic activities. Because of their pseudo-persistence in the aquatic environment and their potentially chronic effects on aquatic life, it is important to closely monitor their concentrations in the aquatic environment using a sensitive analytical method. Sustainable aqueous biphasic systems (ABSs) composed of ionic liquids and biodegradable organic salt (sodium malate) were proposed. The phase diagrams of the systems were firstly determined, and [N₄₄₄₄]Cl-based ABS was selected for the simultaneous extraction and preconcentration of seven APIs. With the developed ABS, extraction efficiencies of APIs close to 100% were obtained. For the developed method, limits of detection (LODs) of 45, 65, 76, 14, 60, 48, and 51 ng L^-1 were obtained for indomethacin, ibuprofen, diclofenac, naproxen, ketoprofen, flurbiprofen, and chloramphenicol, respectively, providing from 1216- to 1238-fold improvement as compared with the analysis without preconcentration. From an economic and environmental point of view, we can predict the prospects and competitive position of the method developed.

Restricted access supramolecular solvent based magnetic solvent bar liquid-phase microextraction for determination of non-steroidal anti-inflammatory drugs in human serum coupled with high performance liquid chromatography-tandem mass spectrometry

A hexafluroisopropanol (HFIP)-alkanol supramolecular solvent (SUPRAS) based magnetic solvent bar (MSB) liquid-phase microextraction (LPME) method was proposed for extraction of non-steroidal anti-inflammatory drugs (NSAIDs, including ketoprofen, naproxen, indomethacin and diclofenac) in human serum. The restricted access HFIP-alkanol SUPRAS was prepared by injecting a mixture of HFIP and alkanol into water. A stainless-steel needle was inserted into a piece of hollow fiber to prepare a magnetic bar. Then the magnetic bar was dipped in SUPRAS to impregnate the wall pores of the hollow fiber, followed by placing it into the serum sample for extraction. Only 4 μL of SUPRAS was consumed per bar. The MSB not only functioned for stirring, but also played the role of extraction and magnetic separation. Under the optimal extraction conditions (seven MSBs, extraction time 33 min and stirring rate 730 rpm), which was obtained by one variable-at-a-time and response surface methodology, the novel MSB-LPME was coupled with high performance liquid chromatography-tandem mass spectrometry to determine NSAIDs in human serum. The method showed a good linear relationship (correlation coefficients ≥ 0.9939). Method limits of detection and method limits of quantitation were in the range of 0.25-0.95 μg L^-1 and 0.83-3.16 μg L^-1, respectively. The recoveries for the spiked human serum samples ranged from 86.8% to 125.1% with intra- and inter-day relative standard deviations less than 9.2% and 18.1%, respectively. Moreover, the method did not require a protein precipitation step, and matrix effects of 72.8%-117.7% showed little interference with mass spectrometry detection, which was due to the double cleanup provided by the restricted access property of SUPRAS and the filtration capacity of hollow fiber. The HFIP-alkanol SUPRAS-based MSB-LPME method proved to be simple, highly efficient and environment-friendly for the pretreatment of serum/plasma.

Iron metal-organic framework supported in a polymeric membrane for solid-phase extraction of anti-inflammatory drugs

A solid-phase extraction methodology using a MIL-101(Fe)/PVDF membrane was proposed as a useful alternative for the simultaneous determination of naproxen, diclofenac, and ibuprofen, three anti-inflammatory drugs (NSAIDs), in wastewater samples by HPLC-CCD analysis. The MIL-101(Fe) was prepared by a rapid microwave-assisted method and supported in a polymeric PVDF membrane. The prepared material was characterized by X-ray diffraction (XRD), nitrogen adsorption-desorption, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and Fourier-transform infrared spectroscopy (FT-IR). The factors that affect the extraction of the NSAIDs using the MIL-101(Fe)/PVDF membrane as the sample volume, the solution pH and the elution solvent were studied in detail. The selected conditions were 50 mL of sample solution at pH 3 and 5 mL of methanol: acetone (30:70, v v^-1) acidified with formic acid at 2% as elution solvent. The analytical method was linear with determination coefficients (r² ≥ 0.998) in the calibration ranges from 2 to 100 ng mL^-1 for naproxen, 20-200 ng mL^-1 for diclofenac, and 100-300 ng mL^-1 for ibuprofen. The intra and inter-day precision (repeatability and reproducibility, respectively) of the method (RSD%, n = 5) were lower than 4.8% and 7.1%, respectively. The accuracy reported as recovery percentages ranged from 82 to 118%, and the limits of detection were between 1.8 and 32.3 ng mL^-1. Moreover, MIL-101(Fe)/PVDF membrane exhibited improved adsorption efficiency compared to that of its analog MIL-101(Cr)/PVDF and the pristine PVDF membranes, obtaining in an easy and rapid (60 min) way a low-cost and low-toxic adsorbent with excellent stability, reusability, mechanic resistance, and simple operation which shows excellent performance.

Gas Chromatographic and Spectrophotometric Determination of Diclofenac Sodium, Ibuprofen, and Mefenamic Acid in Urine and Blood Samples

Objectives

Non-steroidal anti-inflammatory drugs (NSAIDs) are widely used for the treatment of acute to chronic pain. A simple, fast, and reliable gas chromatographic (GC) method with flame ionization detection has been developed for the determination of NSAIDs such as diclofenac sodium, ibuprofen, and mefenamic acid after derivatization with ethyl chloroformate.

Materials and Methods

The GC conditions were optimized as elution from a DB-1 column (30 mx0.32 mm id) at column temperature 150 °C for 3 min, followed by a heating rate of 20 °C/min up to 280 °C and a hold time of 5 min. The nitrogen flow rate was 2.5 mL/min. For spectrophotometric studies, the absorbance was measured against methanol at a wavelength of 200-500 nm.

Results

The calibration curves were linear within 2-10 μg/mL with limits of detection of 0.4-0.6 μg/mL of each drug. The derivatization elution, separation, and quantitation were repeatable (n=3) with relative standard deviation (RSD) within 3.9%. The method was applied for the analysis of the drugs from pharmaceutical formulations and the results of the analysis agreed with labeled values with RSDs within 0.5-3.9%. The results were also confirmed by standard addition method. The percent recovery was calculated with spiked deproteinized human blood serum and urine samples and % recovery of the drugs was obtained within 96-98% with RSDs within 3.1%.

Conclusion

The validated method proved its ability for the assay of NSAIDs in bulk and dosage form in a short analysis time. The method was also useful for the analysis of biological samples.

Amine-functionalized magnetic activated carbon as an adsorbent for preconcentration and determination of acidic drugs in environmental water samples using HPLC-DAD

In the present study, a convenient and highly effective method was developed for the quantification of acidic drugs in wastewater and river water samples. Ultrasonic-assisted magnetic solid phase extraction employing magnetic waste tyre-based activated carbon nanocomposite functionalized with [3-(2-aminoethylamino)propyl]trimethoxysilane as a cost-effective and efficient adsorbent was used for the extraction and preconcentration of acidic drugs (naproxen [NAP], ketoprofen (KET) and diclofenac [DIC]). The quantification of target analytes was achieved by high‐performance liquid chromatography with diode array detector. Under optimum conditions, the detection limit, quantification limit and relative standard deviation obtained for the analytes of interest ranged from 0.38 to 0.76, 1.26 to 2.54 µg L−1 and 2.02 to 4.06%, respectively. The applicability of the developed method was assessed by the spike recovery tests and the relative recoveries proved that the method is reliable for the determination of acidic drugs in wastewater. Thereafter, the method was applied successfully for the determination of NAP, KET and DIC in river water, influent and effluent wastewater.

Combined liquid phase microextraction and fiber-optics-based cuvetteless micro-spectrophotometry for sensitive determination of ammonia in water and food samples by the indophenol reaction

The Berthelot reaction for ammonia is revisited with the aim of miniaturization and addressing interferences as encountered with food and water samples. Headspace single drop microextraction of ammonia in phosphoric acid served to attain selectivity in complex matrices, and liquid-liquid microextraction of red or blue indophenol species into 1-octanol-isooctane (60:40, v/v) resulted into high sensitivity. Fiber-optics-based cuvetteless micro-spectrophotometry has been used for colorimetric determination on microliter volumes of extract. The linear dynamic range, limit of detection and enrichment factor have been found to be 0.2-3 mg kg^-1, 0.14 mg kg^-1 and 38, respectively, measuring red species for milk, cheese and beer (4.9-5.5% error; 4.8-6.3% RSD; n = 5); and 5-400 µg L^-1, 0.4 µg L^-1 and 137, respectively, measuring blue species for water samples (3.3-5.7% error; 3.6-6.8% RSD; n = 5). A plausible reaction scheme has been proposed for nitroprusside catalysis in indophenol reaction.

A simple and rapid technique for the determination of copper based on air-assisted liquid-liquid microextraction and image colorimetric analysis

In this study, a new, cheap, simple and rapid method for the determination of copper in water and food samples using air-assisted liquid-liquid microextraction and digital image decomposition into the primary colors Red (R), Green (G) and Blue (B) is introduced. In the proposed method, sodium diethyl-dithiocarbamate (Na-DDTC) and carbon tetrachloride (CCl4) were used as the chelating agent and extraction solvent, respectively. The digital images of the extraction phase were obtained using an Android mobile phone and analyzed using a free app (Color Grab). Then the value of the B channel was taken as the analytical signal. The effects of different parameters influencing the extraction efficiency were investigated and optimized. Under the optimal conditions, the limit of detection (LOD) and quantitation (LOQ) were 1.5 and 5 μg L-1, respectively. The repeatability of the proposed method, expressed as the relative standard deviation (RSD), was 4.53% for intra-day (n = 8, C = 100 μg L-1) and 5.66% for inter-day (n = 5) precision. The proposed method was applied for the determination of trace amounts of copper in rice, lettuce and water samples with satisfactory results validated by the Graphite Furnace Atomic Absorption Spectrometry technique.

Green synthesis of magnetic carbon nanodot/graphene oxide hybrid material (Fe3O4@C-nanodot@GO) for magnetic solid phase extraction of ibuprofen in human blood samples prior to HPLC-DAD determination

In this study, a green production method was used to obtain magnetic carbon nanodot/graphene oxide hybrid material (Fe₃O₄@C-nanodot@GO) for the magnetic solid phase extraction (MSPE) of ibuprofen (IBU) in human plasma prior to HPLC-DAD determination. For the first time in the literature, Fe₃O₄@C-nanodot@GO hybrid material was synthesized and used as an adsorbent. C-nanodots were produced from pasteurized cow milk by using a simple and cheap hydrothermal method. After production of the C-nanodots and GO, Fe₃O₄@C-nanodot@GO hybrid material was fabricated in green solvent medium by using an one-step hydrothermal method. The method was based on the simple separation, preconcentration and analysis of ibuprofen by using MSPE-HPLC-DAD combination. The concentration changes of ibuprofen in human bloods against time were successfully monitored by using this combined method. For this purpose, blood samples were taken from volunteers at certain intervals after the administration of a certain dose of ibuprofen, and the MSPE method was used to monitor the concentration changes of ibuprofen in the blood samples. Experimental variables affecting the extraction efficiency of IBU such as sample solution pH, amount of adsorbent, extraction time, eluent type and volume were studied and optimized in the details. The characterization studies for the Fe₃O₄@C-nanodot@GO were carried out by X-ray diffraction spectrometry (XRD), Fourier transform infrared spectrometry (FT-IR), Raman spectrometry (Raman), energy dispersive x-ray (EDX), vibrating sample magnetometry (VSM) and scanning electron microscopy (SEM) techniques. Under the optimum experimental conditions, the limit of detection (LOD) was 8.0 ng mL^-1 and the recoveries at three spiked levels in human plasma were ranged from 91.0% to 95.0% with the relative standard deviation (RSD %) less than 4.0 % (n = 6). The results show that together use of MSPE with HPLC-DAD provides a simple and rapid analysis of ibuprofen in human plasma samples.

A nanohybrid composed of polyoxotungstate and graphene oxide for dispersive micro solid-phase extraction of non-steroidal anti-inflammatory drugs prior to their quantitation by HPLC

A nanohybrid was prepared from polyoxotungstate anion and graphene oxide (POT/GO) and characterized in terms of porosity by applying Fourier transform infrared and transmission electron microscopy. The nanohybrid was applied as a sorbent for the dispersive micro solid-phase extraction of the non-steroidal anti-inflammatory drugs (NSAIDs) ibuprofen, diclofenac, and naproxen. Different types of sorbents were compared, and the POT/GO nanohybrid was found to have the best adsorption affinity. The NSAIDs were quantified via HPLC with UV detection. Under the optimum conditions, the limits of detection (at an S/N ratio of 3) range between 0.02-0.03 ng.mL^-1, and the linear response ranges extend from 0.08-200 ng.mL^-1, respectively. The relative standard deviations (RSDs) for five replicates at three concentration levels (0.1, 5 and 100 ng.mL^-1) of NSAIDs ranged from 4.1 to 6.1%. The applicability of the method was confirmed by analyzing spiked real water samples, and satisfactory results were obtained, with recoveries between 95.6 and 99.6%. Graphical abstract Schematic representation of the polyoxotungstate/graphene oxide nanohybrid preparation.

Dual functional monomers modified magnetic adsorbent for the enrichment of non-steroidal anti-inflammatory drugs in water and urine samples

According to the molecular properties of non-steroidal anti-inflammatory drugs (NSADs), a new adsorbent for magnetic solid phase extraction (MSPE) was designed and synthesized. Triethyl-(4-vinylbenzyl)aminium chloride and 4-vinylbenzeneboronic acid were utilized as dual functional monomers to copolymerize with divinylbenzene on the surface of pre-modified Fe₃O₄ nanoparticles. The prepared magnetic adsorbent (Fe₃O₄@TCVA) was characterized by elemental analysis, Fourier transform infrared, scanning electron microscopy, transmission electron microscopy and vibrating sample magnetometer. Due to the abundant boronic acid, quaternary amine and phenyl groups, the Fe₃O₄@TCVA displayed satisfactory extraction performance for target NSADs (diclofenac acid, ibuprofen and mefenamic acid) by means of B-N coordination, anion-exchange, π-π and hydrophobic interactions. Under the optimized conditions, the Fe₃O₄@TCVA/MSPE was combined with high-performance liquid chromatography with diode array detection (HPLC-DAD) to sensitively analyze NSADs in water and human urine samples. Results indicated that the limits of detection for water and urine samples were in the ranges of 0.014-0.031 μg/L and 0.029-0.11 μg/L, respectively. The relative standard deviations for the intra-day and inter-day assay variability were below 10%. The applicability of the proposed Fe₃O₄@TCVA/MSPE-HPLC-DAD method was demonstrated by the successful extraction and quantification of trace levels of NSADs in real water and human urine samples. Satisfactory spiked recovery and reproducibility were achieved.

Air-assisted liquid-liquid extraction coupled with dispersive liquid-liquid microextraction and a drying step for extraction and preconcentration of some phthalate esters from edible oils prior to their determination by GC

In this work, a new, cheap, simple, fast, and low organic solvent consuming procedure is proposed for isolation, enrichment, and gas chromatographic determination of some phthalate esters in edible oils. The method is based on a combination of air-assisted liquid-liquid extraction and dispersive liquid-liquid microextraction followed by a drying step under N₂ gas. Several experimental parameters affecting both extraction and preconcentration steps were investigated and optimized. Under the optimum conditions for the proposed method, wide linear ranges (0.05-800 μg/L) and low detection limits (0.007-0.023 μg/L) were observed. The ranges of enrichment factors and extraction recoveries were 68-340 and 14-68%, respectively. Eventually, the target analytes were successfully determined in different edible oils using the proposed method.

Magnetic polyethyleneimine functionalized reduced graphene oxide as a novel magnetic sorbent for the separation of polar non-steroidal anti-inflammatory drugs in waters

A novel magnetic polyethyleneimine modified reduced graphene oxide (Fe₃O₄@PEI-RGO) had been prepared and then was successfully employed to extract three polar non-steroidal anti-inflammatory drugs (NSAIDs) in different water matrices for the first time coupled with high performance liquid chromatography-diode array detector (HPLC-DAD). The magnetic polyethyleneimine (Fe₃O₄@PEI) composite was first synthesized via one-pot hydrothermal approach and then the Fe₃O₄@PEI-RGO composite was fabricated on the basis of a simple self-assemble approach between positive charged Fe₃O₄@PEI and negative charged GO sheets via electrostatic interaction followed by chemical reduction of GO to RGO. The as-prepared Fe₃O₄@PEI-RGO composite was carefully characterized by transmission electron microscopy (TEM), Fourier transform infrared spectrometry (FT-IR), X-ray diffraction (XRD), thermal gravimetric analyzer (TGA), vibrating sample magnetometer (VSM) and zeta potential analysis. As a surface modifier of RGO, PEI not just changed the polarity of RGO to some extent but also offered more adsorption sites to polar NSAIDs. Compared with Fe₃O₄@PEI, Fe₃O₄-RGO and Fe₃O₄@PEI-GO, the as-prepared Fe₃O₄@PEI-RGO composite, which combined the advantage of PEI and RGO, showed higher extraction efficiency for polar NSAIDs. In addition, the adsorption mechanism was also studied. The analytical parameters influencing the extraction efficiency were optimized in detail. A satisfactory performance was obtained under the optimal conditions. The calibration lines were linear over the concentration in the range of 1-800 μg L^-1 for all the analytes with determination coefficients (r²) varying from 0.9972 to 0.9986. The limits of detection (LODs) were 0.2 μg L^-1. The recoveries were between 91.20% and 101.13% with relative standard deviations (RSDs) in the range of 1.09-7.34%. Overall, a fast, convenient, sensitive and eco-friendly method was successfully proposed and became a promising approach for the determination of trace polar NSAIDs in complex matrices.

A fast and simple air-assisted liquid-liquid microextraction procedure for the simultaneous determination of bisphenols, parabens, benzophenones, triclosan, and triclocarban in human urine by liquid chromatography-tandem mass spectrometry

The increasing awareness and public concern with hazard exposure to endocrine-disrupting chemicals calls for methods capable to handle numerous samples in short analysis time. In this present study, a novel method combining air-assisted liquid-liquid microextraction and liquid chromatography coupled to mass spectrometry was developed and validated for the extraction, preconcentration, and determination of 7 bisphenols (bisphenol A, bisphenol S, bisphenol AP, bisphenol P, bisphenol F, bisphenol AF, bisphenol Z), 7 parabens (methyl-, ethyl-, propyl-, butyl-, benzyl-paraben, methyl-protocatechuic acid, and ethyl-protocatechuic acid), 5 benzophenones (benzophenone-1, benzophenone-2, benzophenone-3, benzophenone-8, and 4-hydroxybenzophenone), and two antimicrobials (triclosan and triclocarban) in human urine samples. Type and volume of solvent, extraction time (cycles), pH sample, ionic strength, agitation, and needle dimensions were evaluated. The matrix-matched calibration curves of all analytes were linear with correlation coefficients higher than 0.99 in the range level of 1.0-20.0 ng mL^-1. The relative standard deviation, precision, at three concentrations (1.0, 10.0 and 20.0 ng mL^-1) was lower than 15% with accuracy ranging from 90% to 114%. The biomonitoring capability of the new proposed method was confirmed with the analysis of 50 human urine samples randomly collected from Brazilian children. High urinary concentrations of several EDCs associated with usage of personal care products were found.

Ultrasound-promoted dispersive micro solid-phase extraction of trace anti-hypertensive drugs from biological matrices using a sonochemically synthesized conductive polymer nanocomposite

In this work, a rapid and efficient procedure named ultrasound meliorated dispersive micro solid-phase extraction followed by high performance liquid chromatography-ultra violet detection (US-D-μSPE-HPLC-UV) was developed for the pre-concentration of the main trace anti-hypertensive drugs in complex matrices. The basis of this procedure was a polypyrrole-sodium dodecylbenzenesulfonate/zinc oxide (PPy-DBSNa/ZnO) nanocomposite. It was readily synthesized by the impressive way of in situ sonochemical oxidative polymerization in the presence of some additives such as FeCl₃ and DBSNa, ultimately leading to the effective coating of PPy on the ZnO nanoparticle cores. Characterization of the proposed nanosorbent was performed by different techniques such as FESEM, XRD,EDX, and TGA, confirming the high quality and proper physico-chemical properties of the proposed sorbent. In order to better investigate the input variables, the central composite design (CCD) combined with the desirability function (DF) was utilized. The enriched optimum conditions consisted of the initial pH value of 11.8, 15mg of the PPy-DBSNa/ZnO nanocomposite, a sonication time of 4.6min, and 100μL of methanol, resulting in maximum responses at a relatively low extraction time with a logical DF. Under the optimum conditions, good linearity (5-5000, 2.5-3500, and 2.5-3000ngmL^-1 for metoprolol, propranolol, and carvedilol, respectively, with the correlation of determinations (R²s) higher than 0.99), low limits of detection (LODs) (0.8-1.5ngmL^-1), proper repeatabilities (relative standard deviation values (RSDs) below 6.3%, n=3), reasonable enrichment factors (EFs) (60-72), and good extraction recoveries (ERs) (higher than %75) were obtainable. These appropriate validations corroborated a good effectiveness of ultrasonic waves in the achievement of a supreme solid phase as well as a facile and efficient microextraction of the low therapeutic concentrations in human plasma and urine samples.

Rapid determination of some psychotropic drugs in complex matrices by tandem dispersive liquid-liquid microextraction followed by high performance liquid chromatography

Simple and rapid determinations of some psychotropic drugs in some pharmaceutical wastewater and human plasma samples were successfully accomplished via the tandem dispersive liquid-liquid microextraction combined with high performance liquid chromatography-ultraviolet detection (TDLLME-HPLC-UV). TDLLME of the three psychotropic drugs clozapine, chlorpromazine, and thioridazine was easily performed through two consecutive dispersive liquid-liquid microextractions. By performing this convenient method, proper sample preconcentrations and clean-ups were achieved in just about 7min. In order to achieve the best extraction efficiency, the effective parameters involved were optimized. The optimal experimental conditions consisted of 100μL of CCl₄ (as the extraction organic solvent), and the pH values of 13 and 2 for the donor and acceptor phases, respectively. Under these optimum experimental conditions, the proposed TDLLME-HPLC-UV technique provided a good linearity in the range of 5-3000ngmL^-1 for the three psychotropic drugs with the correlation of determinations (R²s) higher than 0.996. The limits of quantification (LOQs) and limits of detection (LODs) obtained were 5.0ngmL^-1 and 1.0-1.5ngmL^-1, respectively. Also the proper enrichment factors (EFs) of 96, 99, and 88 for clozapine, chlorpromazine, and thioridazine, respectively, and good extraction repeatabilities (relative standard deviations below 9.3%, n=5) were obtained.