Test for arsenic speciation in waters based on a paper-based analytical device with scanometric detection

Arsenic field test kits based on solid-phase fluorescence filter effect induced by silver nanoparticle formation

Millions of people worldwide are affected by naturally occurring arsenic in groundwater. The development of a low-cost, highly sensitive, portable assay for rapid field detection of arsenic in water is important to identify areas for safe wells and to help prioritize testing. Herein, a novel paper-based fluorescence assay was developed for the on-site analysis of arsenic, which was constructed by the solid-phase fluorescence filter effect (SPFFE) of AsH3-induced the generation of silver nanoparticles (AgNPs) toward carbon dots. The proposed SPFFE-based assay achieves a low arsenic detection limit of 0.36 μg/L due to the efficient reduction of Ag+ by AsH3 and the high molar extinction coefficient of AgNPs. In conjunction with a smartphone and an integrated sample processing and sensing platform, field-sensitive detection of arsenic could be achieved. The accuracy of the portable assay was validated by successfully analyzing surface and groundwater samples, with no significant difference from the results obtained through mass spectrometry. Compared to other methods for arsenic analysis, this developed system offers excellent sensitivity, portability, and low cost. It holds promising potential for on-site analysis of arsenic in groundwater to identify safe well locations and quickly obtain output from the global map of groundwater arsenic.

Nanomaterial-based optical colorimetric sensors for rapid monitoring of inorganic arsenic species: a review

Health concerns about the toxicity of arsenic compounds have therefore encouraged the development of new analytical tools for quick monitoring of arsenic in real samples with improved sensitivity, selectivity, and reliability. An overview of advanced optical colorimetric sensor techniques for real-time monitoring of inorganic arsenic species in the environment is given in this review paper. Herein, several advanced optical colorimetric sensor techniques for arsenite (As+3) and arsenate (As+5) based on doping chromogenic dyes/reagents, biomolecule-modified nanomaterials, and arsenic-binding ligand tethered nanomaterials are introduced and discussed. This review also highlights the benefits and limitations of the colorimetric sensor for arsenic species. Finally, prospects and future developments of an optical colorimetric sensor for arsenic species are also proposed. For future study in this sector, particularly for field application, authors recommend this review paper will be helpful for readers to understand the design principles and their corresponding sensing mechanisms of various arsenic optical colorimetric sensors.

Development of a colorimetric sensor based on the coupling of a microfluidic paper-based analytical device and headspace microextraction for determination of formaldehyde in textile, milk, and wastewater samples

A user-friendly, cost-effectively, portable, and environmentally friendly colorimetric sensor for the quantitative determination of formaldehyde was developed based on the combining of microfluidic paper-based analytical device (μPAD), headspace microextraction (HSME), and digital image colorimetry. Coupling HSME and μPAD led to enhancements in selectivity and sensitivity of the sensor through sample cleanup and analyte enrichment. To construct the μPAD-HSME device, two pieces of paper as the sample and detection zone were placed facing each other so that a small common and sealed space was created between them. The color change occurred when the analyte in the gaseous form crossed this gap and reached the detection zone. Colorimetric sensing in the detection zone was performed based on the Hantzsch reaction. The color change in the detection zone was recorded by a smartphone and digital images were processed using image analysis software based on the RGB model. The influence of some key variables on the sensitivity of the method including derivatization reagent composition, sample volume, extraction temperature, and extraction time was studied and optimized. The linear dynamic range of the method was obtained in two ranges of 0.10-0.75 and 0.75-5.0 mg L-1 with a limit of detection of 0.03 mg L-1. The recoveries were in the range 80-126% for the quantification of formaldehyde in textile, milk, and wastewater samples.

A facile and automated microfluidic electrochemical platform for the in-field speciation analysis of inorganic arsenic

An automated microfluidic electrochemical platform was developed for the rapid in-field analysis of arsenic speciation. Herein, we integrated an electrochemical sensing and microfluidic channel for the simultaneous determination of As(III) and total inorganic As (total iAs) within a single device. The platform was fabricated by assembling a gold nanoparticle-modified screen-printed graphene electrode (AuNP/SPGE) on a hydrophilic polyethylene terephthalate (PET) sheet that was specially designed to enclose a microfluidic channel with dual flow channels for separate determination of the two species. While As(III) can be promptly detected with the AuNP/SPGE on one end, thioglycolic acid stored in glass fiber is employed on the other end to reduce As(V) before being electrochemically analyzed on the AuNP/SPGE as total iAs; the difference represents the amount of As(V). With a wireless potentiostat and a smartphone equipped with Bluetooth technology, the overall procedure can be fully automated and accomplished merely within 9 min. The linear ranges for the determination of As(III) and total iAs were found to be 50-1000 and 100-1500 ng/mL with detection limits of 3.7 and 17 ng/mL, respectively. The proposed method was validated and applied for the inorganic As speciation of various food samples with satisfactory results compared to those obtained with the standard HPLC-ICP‒MS protocol. This novel microfluidic electrochemical platform offers numerous advantages, notably for its simplicity, speed, low cost, and portability for on-site analysis, which conclusively makes it a highly promising analytical device for the speciation of inorganic arsenic.

Detection of gases and organic vapors by cellulose-based sensors

The growing interest in the development of cost-effective, straightforward, and rapid analytical systems has found cellulose-based materials, including cellulose derivatives, cellulose-based gels, nanocellulosic materials, and the corresponding (nano)cellulose-based composites, to be valuable platforms for sensor development. The present work presents recent advances in the development of cellulose-based sensors for the determination of volatile analytes and derivatives of analytical relevance. In particular, strategies described in the literature for the fabrication and modification of cellulose-based substrates with responsive materials are summarized. In addition, selected contributions reported in the field of paper-based volatile sensors are discussed, with a particular emphasis on quick response (QR) code paper-based platforms, intelligent films for food freshness monitoring, and sensor arrays for volatile discrimination purposes. Furthermore, analytical strategies devised for the determination of ionic species by in situ generation of volatile derivatives in both paper-based analytical devices (PADs) and microfluidic PADs will also be described.

Development of a versatile smartphone-based environmental analyzer (vSEA) and its application in on-site nutrient detection

The citizen-science-based environmental survey can benefit from the smartphone technology used in chemical and biological sensing of a wide range of analytes. Quantification by smartphone-based colorimetric assays is being increasingly reported, however, most of the quantification uses empirical formula or complex exhaustive methods. In this study, a versatile and robust algorithm is proposed to overcome these limitations. A model is established to simulate and analyze the conversion process from the camera's spectral information into RGB (Red, Green, Blue) color information. Moreover, the feasibility of the algorithm for the quantification of different analytes is also explored. Based on this algorithm, a versatile smartphone-based environmental analyzer (vSEA) is built and its reliability, versatility, and analytical performance are comprehensively optimized. The good linearity (R² ≥ 0.9954) and precision (relative standard deviations < 5.3%) indicates that the vSEA is accurate enough to quantify the nutrients in most natural waters. Furthermore, the vSEA is used for the field measurement of five important nutrients, and the results show no significant difference compared to conventional methods. The vSEA offers a simpler and easier method for the on-site measurement of nutrients in natural water bodies, which can aid in the emergency monitoring of aqueous ecosystems and the performance of citizen-science-based research.

Nanoinspired Biocompatible Chemosensors: Progress toward Efficient Prognosis of Arsenic Poisoning

Diagnosing heavy metals poisoning in human beings is of paramount importance. In this work, we present the design of a biocompatible Fe_xNi_(1-x)O hierarchical nanostructure-based sensor for ultraselective detection of arsenate (As(V)) ions in biological environments (e.g., body fluids, blood plasma, etc.). A novel iron doping technique was employed to fabricate the nanostructures rich with Fe cores to induce ultraselectivity toward arsenates. These nanostructures were used as dispersed markers and thin films deposited on Si/SiO₂ substrates to support in vivo and in vitro detection of As(V) ions. The device demonstrated excellent sensitivity with a maximum response of 64.7% (for 1000 ppm As(V) ions) with a limit of detection of 1 ppb in blood plasma. The sensor's response time (τ_r) was 5 s with 95.48% recovery with a maximum error of ±0.549% after three washes. The device showed excellent response stability for 63 days with a maximum error of ±1.27%. The sensor devices were highly reproducible, with a maximum variation of ±0.6% in response for a batch of four devices. Due to Fe doping, the nanostructures in suspension demonstrated as arsenate markers with excellent cytocompatibility (with dosage up to 1 mg/mL) for human umbilical vein endothelial cells and 3T3 fibroblasts (LDH < 120 and cell viability ∼80%) till 48 h of incubation. The sensing mechanism suggested that the nanostructures not only detect arsenates but also prevent their substantial reduction to arsenites under anoxic environments. Thus, the sensors may show considerable progress toward early arsenate detection in living systems.

Speciation of inorganic arsenic in aqueous samples using a novel hydride generation microfluidic paper-based analytical device (µPAD)

The development of the first microfluidic paper-based analytical device (µPAD) for the speciation of inorganic arsenic in environmental aqueous samples as arsenite (As(III)) and arsenate (As(V)) which implements hydride generation on a paper platform is described. The newly developed µPAD has a 3D configuration and uses Au(III) chloride as the detection reagent. Sodium borohydride is used to generate arsine in the device’s sample zone by reducing As(III) in the presence of hydrochloric acid or both As(III) and As(V) (total inorganic As) in the presence of sulfuric acid. Arsine then diffuses across a hydrophobic porous polytetrafluoroethylene membrane into the device’s detection zone where it reduces Au(III) to Au nanoparticles. This results in a color change which can be related to the concentration of As(III) or total inorganic As (i.e., As(III) and As(V)) concentration. Under optimal conditions, the µPAD is characterized by a limit of detection of 0.43 mg L⁻¹ for total inorganic As (As(III) + As(V)) and 0.41 mg L⁻¹ for As(III) and a linear calibration range in both cases of 1.2–8.0 mg As L⁻¹. The newly developed µPAD-based method was validated by applying it to groundwater and freshwater samples and comparing the results with those obtained by conventional atomic spectrometric techniques.

Waterproof Cellulose-Based Substrates for In-Drop Plasmonic Colorimetric Sensing of Volatiles: Application to Acid-Labile Sulfide Determination in Waters

The present work reports on the assessment of widely available waterproof cellulose-based substrates for the development of sensitive in-drop plasmonic sensing approaches. The applicability of three inexpensive substrates, namely, Whatman 1PS, polyethylene-coated filter paper, and tracing paper, as holders for microvolumes of colloidal solutions was evaluated. Waterproof cellulose-based substrates demonstrated to be highly convenient platforms for analytical purposes, as they enabled in situ generation of volatiles and syringeless drop exposure unlike conventional single-drop microextraction approaches and can behave as sample compartments for smartphone-based colorimetric sensing in an integrated way. Remarkably, large drop volumes (≥20 μL) of colloidal solutions can be employed for enrichment processes when using Whatman 1PS as holder. In addition, the stability and potential applicability of spherical, rod-shaped, and core-shell metallic NPs onto waterproof cellulose-based substrates was evaluated. In particular, Au@AgNPs showed potential for the colorimetric detection of in situ generated H₂S, I₂, and Br₂, whereas AuNRs hold promise for I₂, Br₂, and Hg⁰ colorimetric sensing. As a proof of concept, a smartphone-based colorimetric assay for determination of acid-labile sulfide in environmental water samples was developed with the proposed approach taking advantage of the ability of Au@AgNPs for H₂S sensing. The assay showed a limit of detection of 0.46 μM and a repeatability of 4.4% (N = 8), yielding satisfactory recoveries (91-107%) when applied to the analysis of environmental waters.

Determination of Arsenic Content in Water Using a Silver Coordination Polymer

In this report, we describe a practical method for the colorimetric determination of dissolved inorganic arsenic content in water samples, using a silver coordination polymer as the sensing material. We demonstrate that a crystalline polymer framework can be used to stabilize silver(I) ions, greatly reducing both photosensitivity and water solubility, while still affording sufficient reactivity to detect arsenic in water samples at low parts-per-billion (ppb) levels. Test strips fabricated with the silver-based polymer are shown to be effective for field tests of groundwater under real-world operating conditions and display performance that is competitive with commercially available mercury-based test strips. Spectroscopic methods are also used to probe the reaction products formed, in order to better understand the sensing mechanism. Thus, our work provides the foundation for an improved field test that could be deployed to help manage groundwater usage in regions where arsenic contamination is problematic but sophisticated lab testing is not readily available.

Assessing citric acid-derived luminescent probes for pH and ammonia sensing: A comprehensive experimental and theoretical study

The present work reports on the assessment of luminescent probes derived from citric acid (CA) and β-aminothiols (namely, l-cysteine (Cys) and cysteamine) for instrumental and smartphone-based fluorimetric sensing purposes. Remarkably, the evaluated luminescent probes derived from natural compounds showed pH-dependent dual excitation/dual emission features. Both fluorophores hold promise for the ratiometric fluorimetric sensing of pH, being especially convenient for the smartphone-based sensing of pH via ratiometric analysis by proper selection of B and G color channels. Time dependent density functional theory (TDDFT) calculations allowed to substantiate the pH dependent structure-property relationship and to unveil the critical role of the CA derived carboxyl group, these findings contributing to the fundamental knowledge on these systems for the rational design of new fluorophores and in establishing fluorescence sensing mechanisms of CA-derived systems. Besides, paper-based devices modified with CA-Cys were implemented in a three-phase separation approach for sensitive and selective ammonia sensing, yielding a remarkable enrichment factor of 389 and a limit of detection of 37 μM under optimal conditions. The proposed approach was successfully applied to the determination of ammonia nitrogen and extractable ammonium in water samples and marine sediments, respectively.

Probabilistic multi-pathway human health risk assessment due to heavy metal(loid)s in a traditional gold mining area in Ecuador

Mining operations are important causes of environmental pollution in developing countries where mining waste management is not adequate. Consequently, heavy metal(loid)s are easily released into the environment, being a potential risk to human health. This study carries out a Bayesian probabilistic human health risk assessment, related to multi-pathway exposure to heavy metal(loid)s in a gold mining area in Southern Ecuador. Concentrations of As, Cd, Cr, Cu, Ni, Pb, and Zn in tap water, surface water, and soil samples, were analyzed to assess the potential adverse human health effects based on the Hazard Index (HI) and Total cancer risk (TCR). Adults and children residents were surveyed to adjust their exposure parameters to the site-specific conditions. Exposure to heavy metal(loid)s resulted in unacceptable risk levels for human health in the two age groups, both carcinogenic (TCR > 1 × 10-5) and non-carcinogenic (HI > 1) through ingestion of tap water and incidental ingestion of surface water. Sensitivity analysis showed that As concentration in waters and exposure frequency were the main contributors to risk outcome. Exposure to soil via accidental ingestion and dermal contact was below the safety limit, not posing a risk to human health. These findings can provide a baseline for the environmental management of the mining area and indicate the need for further research on As pollution in water and its implications on the health of the inhabitants of mining communities.

MnFe2O4 micromotors enhanced field digestion and solid phase extraction for on-site determination of arsenic in rice and water

Despite the increased interest and great progress obtained on arsenic test, it is still a challenge to accomplish the on-site determination of arsenic in rice due to the expensive instrumentation and harsh digestion process. In this work, MnFe₂O₄ micromotors were found to retain high catalytic activity to simultaneously produce large amounts of hydroxyl radicals and O₂ bubbles in the presence of H₂O₂. Interestingly, the generated bubbles autonomously propel the micromotors and prevent them from depositing, thus keeping their high catalytic activity. As a result, a MnFe₂O₄ micromotors enhanced digestion method was developed for the field digestion of rice samples within 100 min only using H₂O₂, which was further utilized to realize the on-site detection of arsenic in rice by coupling with the Gutzeit method followed headspace solid phase extraction. A quantification limit of 40 μg kg^-1 was obtained for the determination of arsenic in rice. Owing to their capabilities of the efficient and rapid adsorption of arsenic and continuous movement, a MnFe₂O₄ micromotors enhanced solid phase extraction was also established for the sensitive determination of arsenic in water with a 1 μg L^-1 of quantification limit. The accuracy of the developed method was validated via analysis of a Certified Reference Material of rice (GBW10043) and a series of rice and water samples with satisfactory results, showing promising potential in the sensitive on-site detection of arsenic in rice and water samples.

Nanomaterial-Integrated Cellulose Platforms for Optical Sensing of Trace Metals and Anionic Species in the Environment

The development of disposable sensors that can be easily adapted to every analytical problem is currently a hot topic that is revolutionizing many areas of science and technology. The need for decentralized analytical measurements at real time is increasing for solving problems in areas such as environment pollution, medical diagnostic, food quality assurance, etc., requiring fast action. Despite some current limitations of these devices, such as insufficient detection capability at (ultra)trace level and risk of interferent effects due to matrix, they allow low-cost analysis, portability, low sample consumption, and fast response. In the last years, development of paper-based analytical devices has undergone a dramatic increase for on-site detection of toxic metal ions and other pollutants. Along with the great availability of cellulose substrates, the immobilization of receptors providing enhanced recognition ability, such as a variety of nanomaterials, has driven the design of novel sensing approaches. This review is aimed at describing and discussing the different possibilities arisen with the use of different nanoreceptors (e.g., plasmonic nanoparticles, quantum dots, carbon-based fluorescent nanoparticles, etc.) immobilized onto cellulose-based substrates for trace element detection, their advantages and shortcomings.

Fluorescent carbonaceous materials isolated from cigarette ashes for the determination of iron(iii) in water samples

In the present work, ready-to-use fluorescent carbonaceous materials (CMs) were isolated from cigarette ashes by following a simple procedure based on the dispersion of ashes in water and subsequent filtration. The isolated raw material was characterized by fluorescence microscopy, Fourier transform infrared (FT-IR) spectroscopy, and dynamic light scattering (DLS) analysis. The isolated CMs displayed excitation-dependent fluorescence emission, which enables them to be used as a fluorescent probe. The developed fluorescent probe possesses high potential for sensitive and selective detection of Fe(iii) via a quenching mechanism. The decrease in fluorescence intensity was in linear relationship with the concentrations of Fe(iii) within the range of 0-89.6 μM. The fluorescent probe was successfully applied to the determination of Fe(iii) in tap and well waters with an average recovery of 87% with an excellent relative standard deviation (RSD) of 0.63%, regardless of the water sample analyzed. Besides, fluorescence variation in the presence of Fe(iii) was evaluated by analyzing red, green, and blue (RGB) channels of the fluorescence colors. Finally, the possibility of semi-quantitative determination of Fe(iii) in water by the naked eye using the proposed fluorescent probe was also evaluated.

Paper-based sorptive phases for microextraction and sensing

The simplification of the analytical procedures, including cost-effective materials and detectors, is a current research trend. In this context, paper has been identified as a useful material thanks to its low price and high availability in different compositions (office, filter, chromatographic). Its porosity, flexibility, and planar geometry permit the design of flow-through devices compatible with most instrumental techniques. This article provides a general overview of the potential of paper, as substrate, on the simplification of analytical chemistry methodologies. The design of paper-based sorptive phases is considered in-depth, and the different functionalization strategies are described. Considering our experience in sample preparation, special attention has been paid to the use of these phases under the classical microextraction-analysis workflow, which usually includes a chromatographic separation of the analytes before their determination. However, the interest of these materials extends beyond this field as they can be easily implemented into spectroscopic and electrochemical sensors. Finally, the direct analysis of paper substrates in mass spectrometry, in the so-called paper-spray technique is also discussed. This review is more focused on presenting ideas rather than the description of specific applications to draw a general picture of the potential of these materials.

Bladder cancer hunting: A microfluidic paper-based analytical device

Bladder cancer is the fourth most common cancer in men, and it is becoming a prevalent malignancy. Most of the regular clinical examinations are prompt evaluations with cystoscopy, renal function testing, which require high-precision instrument, well-trained operators, and high cost. In this study, a microfluidic paper-based analytical device (μPAD) was fabricated to detect nuclear matrix protein 22 (NMP22) and bladder cancer antigen (BTA) from the urine samples. Urine samples were collected from 11 bladder cancer patients and 10 well-beings as experiment and control groups, respectively, to verify the working efficiency of μPAD. A remarkable checkout efficiency of up to 90.91% was found from the results. Meanwhile, this method is feasible for home-based self-detection from urine samples within 10 min for the total process, which provides a new way for quick, economical, and convenient tumor diagnosis, prognosis evaluation, and drug response.

A simple paper-based approach for arsenic determination in water using hydride generation coupled with mercaptosuccinic-acid capped CdTe quantum dots

This research aims to develop a simple paper-based device for arsenic detection in water samples where a hydride generation technique coupled with mercaptosuccinic acid-capped CdTe quantum dots (MSA-CdTe QDs) as a detection probe was applied to the detection system. MSA-CdTe QDs were coated on a paper strip, inserted into the cover cap of a reaction bottle, to react with the developed arsine gas. Fluorescent emission of the QDs was quenched upon the presence of arsenic in solutions, whereby only a small amount of the MSA-CdTe QDs was required. The excitation and emission wavelengths for fluorescent detection were 278.5 nm and 548.5 nm, respectively. The proposed system provided a limit of detection of 0.016 mg L-1 and a limit of quantitation of 0.053 mg L-1, and a detection range of 0.05-30.00 mg L-1. In addition, the tolerance level of the detection approach to interference by other vapor-generated species was successfully improved by placing another paper strip coated with a solution of saturated lead acetate in front of the detection paper strip. This developed approach offered a simple and fast, yet accurate and selective detection of arsenic contaminated in water samples. In addition, the mechanism of fluorescent quenching was also proposed.

A paper-based gas sensor for simultaneous noninstrumental colorimetric detection of nitrite and sulfide in waters

The use of paper-based devices in combination with noninstrumental detection systems is becoming increasingly important in the analytical field due to its simplicity, rapidity, and low cost. However, their use for determination of volatile analyte derivatives is still relatively scarce. The present work reports on the assessment of a paper-based gas-sensing approach for the simultaneous noninstrumental colorimetric detection of nitrite and sulfide. Colorimetric systems based on the Griess and methylene blue assays, formation of colored metallic sulfides, and interaction/reaction with in situ generated metallic nanoparticles were preliminary evaluated. Then, the effect of experimental variables affecting the analytical performance of the paper-based gas sensor was studied with two digitization systems, namely a scanner and a smartphone. Under optimal conditions, the developed system yielded limits of detection of 0.055 and 0.005 mg/L for nitrite and sulfide, respectively. The repeatability, expressed as relative standard deviation, was found to be 5.9 and 6.7% for nitrite and sulfide, respectively. The proposed method was finally applied to the analysis of water samples, showing recoveries in the range of 95-105%.

Distance-Based Paper Device Combined with Headspace Extraction for Determination of Cyanide

We report for the first time a distance-based paper device based on gold/silver core shell nanoparticles (Au@Ag NPs) for a simple, inexpensive, instrument-free, and portable determination of cyanide by the naked eye. Au@Ag NPs immobilized on a paper channel were etched by cyanide ions so that a yellow color band length of Au@Ag NPs is proportional to a decrease in the cyanide concentration. Quantification is achieved by measuring color length, thus eliminating the need to differentiate hues and intensities by the user, and the processing data of each imaging device. Moreover, the paper-based headspace extraction was combined with the distance-based paper device to improve the sensitivity. The enrichment factor was found to be 30-fold and the linearity was found in the range 0.05–1 mg L⁻¹. The naked eye detection limit was 10 μg L⁻¹ where the World Health Organization (WHO) have regulated the maximum level of cyanide in drinking water as 70 μg L⁻¹. Our proposed device also showed no interference from common cations and anions presenting in seawater and waste water including thiocyanate, chloride. Finally, our device has been successfully applied to determine cyanide ions in seawater, drinking water, tap water and wastewater providing satisfactory precision and accuracy.

Portable paper sensors for the detection of heavy metals based on light transmission-improved quantification of colorimetric assays

A light-transmission based method is used to quantify the colorimetric results on paper sensor with expand linearity range, which improves accuracy and sensitivity for the detection of highly concentrated samples.

Silver Nanowires Inks for Flexible Circuit on Photographic Paper Substrate

Silver nanowires (AgNWs) have inspired many research interests due to their better properties in optical, electric, and flexible applications. One such exploitable use is as the electrical conductive fillers for print electronics. In this paper, AgNWs with mean a diameter of 80 nm and mean length of 13.49 μm were synthesized using the polyol solvothermal method. A sonication-induced scission process was used to obtain AgNWs with a length range of 7.64–11.21 μm. Further AgNWs inks were prepared with the as-synthesized AgNWs as conductive fillers in anhydrous ethanol. The conductive inks were coated on resin coated photographic paper substrate using the knife coating process and dried at room temperature. The effects of the number of layers of AgNWs coating, the concentration of AgNWs, and the length of AgNWs on the microstructure and electrical properties of samples were investigated by scanning electron microscopy and using the four-point probe method. The results show that the conductivity of the AgNWs coating increases with the increase in the number of layers in the AgNWs coating, concentration and length of the AgNWs.

An efficient protocol to use iron oxide nanoparticles in microfluidic paper device for arsenic detection

This method describes a rapid ecofriendly and affordable method for detecting arsenic in the water sample. The system designed works on the principle that involves generation of arsine due to reduction of arsenic by bare and cysteine capped iron oxide nanoparticles and its further reaction with silver nitrate present on the microfluidic paper analytical device (μPAD). Change in the color of μPAD from colorless to reddish brown is a result of reaction between arsine gas and silver nitrate, and is the detection criteria. The sample solution of arsenic was prepared in lemon juice to provide the required acidic environment for hydride generation. This proposed method has detection limit of 0.01 ppm (10 ppb) and 1 ppm for cysteine capped and bare iron oxide nanoparticles respectively. This is for the first time that iron oxide nanoparticles are being used for detection and reduction arsenic species in environmental sample. The same device can be used for on-site detection in an ecofriendly manner.