Recent advances in rolling circle amplification-based biosensing strategies-A review

Palindrome sequence mediated target recycling integrating with self-priming assisted signal reaction for sensitive miRNA detection

The development of a sensitive and isothermal technique with a greatly enhanced miRNA detection signal is still technically problematic due to the low abundance of miRNA and high sequence similarities with homologous miRNAs. Herein, we propose a novel fluorescence approach for sensitive and reliable miRNA detection by integrating the palindrome sequence mediated target recycling with self-priming assisted signal reaction. In this method, a dual toehold DNA nano-probe (HT) with two functional arms is designed to mediate specific target recognition and signal amplification. In the presence of target miRNA, it binds to the recognition module of HT probe, releasing the "2" sequence to initiate strand displacement amplification (SDA) and a self-priming-induced signal reaction. Based on the elegant design, the proposed method exhibits a wide linear response range exceeding five orders of magnitude and a low limit of detection of 0.96 fM according to the 3δ rule. The non-specific signal is below 5 % for non-target miRNA detection. Taking the merits of excellent sensitivity, desirable specificity, and superior anti-interference ability, the proposed approach shows a promising prospect for detecting miRNAs in complicated biological environments and early diagnosis of diseases.

Amplification- and Enzyme-Free Magnetic Diagnostics Circuit for Whole-Genome Detection of SARS-CoV-2 RNA

Polymerase chain reaction (PCR) requires thermal cycling and enzymatic reactions for sequence amplification, hampering their applications in point-of-care (POC) settings. Magnetic bioassays based on magnetic particle spectroscopy (MPS) and magnetic nanoparticles (MNPs) are isothermal, wash-free, and can be quantitative. Realizing them amplification- and enzyme-free on a benchtop device, they will become irreplaceable for POC applications. Here we demonstrate a first-in-class magnetic signal amplification circuit (MAC) that enables detection of whole genome of SARS-CoV-2 by combining the specificity of toehold-mediated DNA strand displacement with the magnetic response of MNPs to declustering processes. Using MAC, we detect the N gene of SARS-CoV-2 samples at a concentration of 104 RNA copies/μl as determined by droplet digital PCR. Further, we demonstrate that MAC can reliably distinguish between SARS-CoV-2 and other human coronaviruses. Being a wash-, amplification- and enzyme-free biosensing concept and working at isothermal conditions (25 °C) on a low-cost benchtop MPS device, our MAC biosensing concept offers several indispensable features for translating nucleic acid detection to POC applications.

Sensitive Multiplexed MicroRNA Spatial Profiling and Data Classification Framework Applied to Murine Breast Tumors

MicroRNAs (miRNAs) are small RNAs that are often dysregulated in many diseases, including cancers. They are highly tissue-specific and stable, thus, making them particularly useful as biomarkers. As the spatial transcriptomics field advances, protocols that enable highly sensitive and spatially resolved detection become necessary to maximize the information gained from samples. This is especially true of miRNAs where the location their expression within tissue can provide prognostic value with regard to patient outcome. Equally as important as detection are ways to assess and visualize the miRNA's spatial information in order to leverage the power of spatial transcriptomics over that of traditional nonspatial bulk assays. We present a highly sensitive methodology that simultaneously quantitates and spatially detects seven miRNAs in situ on formalin-fixed paraffin-embedded tissue sections. This method utilizes rolling circle amplification (RCA) in conjunction with a dual scanning approach in nanoliter well arrays with embedded hydrogel posts. The hydrogel posts are functionalized with DNA probes that enable the detection of miRNAs across a large dynamic range (4 orders of magnitude) and a limit of detection of 0.17 zeptomoles (1.7 × 10-4 attomoles). We applied our methodology coupled with a data analysis pipeline to K14-Cre Brca1f/fTp53f/f murine breast tumors to showcase the information gained from this approach.

EXPAR for biosensing: recent developments and applications

Emerging as a promising novel amplification technique, the exponential amplification reaction (EXPAR) offers significant advantages due to its potent exponential amplification capability, straightforward reaction design, rapid reaction kinetics, and isothermal operation. The past few years have witnessed swift advancements and refinements in EXPAR-based technologies, with numerous high-performance biosensing systems documented. A deeper understanding of the EXPAR mechanism has facilitated the proposal of novel strategies to overcome limitations inherent to traditional EXPAR. Furthermore, the synergistic integration of EXPAR with diverse amplification methodologies, including the use of a CRISPR/Cas system, metal nanoparticles, aptamers, alternative isothermal amplification techniques, and enzymes, has significantly bolstered analytical efficacy, aiming to enhance specificity, sensitivity, and amplification efficiency. This comprehensive review presents a detailed exposition of the EXPAR mechanism and analyzes its primary challenges. Additionally, we summarize the latest research advancements in the biomedical field concerning the integration of EXPAR with diverse amplification technologies for sensing strategies. Finally, we discuss the challenges and future prospects of EXPAR technology in the realms of biosensing and clinical applications.

Recent progress on DNAzyme-based biosensors for pathogen detection

Pathogens endanger food safety, agricultural productivity, and human health. Those pathogens are spread through direct/indirect contact, airborne transmission and food/waterborne transmission, and some cause severe health consequences. As the population grows and global connections intensify, the transmission of infectious diseases expands. Traditional detection methods for pathogens still have some shortcomings, such as time-consuming procedures and high operational costs. To fulfil the demands for simple and effective detection, numerous biosensors have been developed. DNAzyme, a unique DNA structure with catalytic activity, is gradually being applied in the field of pathogen detection owing to its ease of preparation and use. In this review, we concentrated on the two main types of DNAzyme, hemin/G-quadruplex DNAzyme (HGD) and RNA-cleaving DNAzyme (RCD), explaining their research progress in pathogen detection. Furthermore, we introduced two additional novel DNAzymes, CLICK 17 DNAzyme and Supernova DNAzyme, which showed promising potential in pathogen detection. Finally, we summarize the strengths and weaknesses of these four DNAzymes and offer feasible recommendations for the development of biosensors.

CRISPR/Cas13a-based genome editing for establishing the detection method of H9N2 subtype avian influenza virus

Avian influenza virus (AIV) subtype H9N2 has significantly threatened the poultry business in recent years by having become the predominant subtype in flocks of chickens, ducks, and pigeons. In addition, the public health aspects of H9N2 AIV pose a significant threat to humans. Early and rapid diagnosis of H9N2 AIV is therefore of great importance. In this study, a new method for the detection of H9N2 AIV based on fluorescence intensity was successfully established using CRISPR/Cas13a technology. The Cas13a protein was first expressed in a prokaryotic system and purified using nickel ion affinity chromatography, resulting in a high-purity Cas13a protein. The best RPA (recombinase polymerase amplification) primer pairs and crRNA were designed and screened, successfully constructing the detection of H9N2 AIV based on CRISPR/Cas13a technology. Optimal concentration of Cas13a and crRNA was determined to optimize the constructed assay. The sensitivity of the optimized detection system is excellent, with a minimum detection limit of 10° copies/μL and didn't react with other avian susceptible viruses, with excellent specificity. The detection method provides the basis for the field detection of the H9N2 AIV.

The Present and Future Landscapes of Molecular Diagnostics

Nucleic acid testing is the cornerstone of modern molecular diagnostics. This review describes the current status and future directions of molecular diagnostics, focusing on four major techniques: polymerase chain reaction (PCR), next-generation sequencing (NGS), isothermal amplification methods such as recombinase polymerase amplification (RPA) and loop-mediated isothermal amplification (LAMP), and clustered regularly interspaced short palindromic repeats (CRISPR)-based detection methods. We explore the advantages and limitations of each technique, describe how each overlaps with or complements other techniques, and examine current clinical offerings. This review provides a broad perspective into the landscape of molecular diagnostics and highlights potential future directions in this rapidly evolving field.

The pros and cons of nucleic acid-amplified immunoassays-a comparative study on the quantitation of prostate-specific antigen with and without rolling circle amplification

Integrating isothermal nucleic acid amplification strategies into immunoassays can significantly decrease analytical limits of detection (LODs). On the other hand, an amplification step adds time, complication, reagents, and costs to the assay format. To evaluate the pros and cons in the context of heterogeneous multistep immunoassays, we quantified prostate-specific antigen (PSA) with and without rolling circle amplification (RCA). In addition, we compared time-gated (TG) with continuous-wave (CW) photoluminescence (PL) detection using a terbium complex and a fluorescein dye, respectively. For both direct (non-amplified) and amplified assays, TG PL detection provided circa four- to eightfold lower LODs, illustrating the importance of autofluorescence background suppression even for multi-wash assay formats. Amplified assays required an approximately 2.4 h longer assay time but led to almost 100-fold lower LODs down to 1.3 pg/mL of PSA. Implementation of TG-FRET (using a Tb-Cy5.5 donor-acceptor pair) into the RCA immunoassay resulted in a slightly higher LOD (3.0 pg/mL), but the ratiometric detection format provided important benefits, such as higher reproducibility, lower standard deviations, and multiplexing capability. Overall, our direct comparison demonstrated the importance of biological background suppression even in heterogeneous assays and the potential of using isothermal RCA for strongly decreasing analytical LODs, making such assays viable alternatives to conventional enzyme-linked immunosorbent assays (ELISAs).

Coupling Exponential to Linear Amplification for Endpoint Quantitative Analysis

Exponential DNA amplification techniques are fundamental in ultrasensitive molecular diagnostics. These systems offer a wide dynamic range, but the quantification requires real-time monitoring of the amplification reaction. Linear amplification schemes, despite their limited sensitivity, can achieve quantitative measurement from a single end-point readout, suitable for low-cost, point-of-care, or massive testing. Reconciling the sensitivity of exponential amplification with the simplicity of end-point readout would thus break through a major design dilemma and open a route to a new generation of massively scalable quantitative bioassays. Here a hybrid nucleic acid-based circuit design is introduced to compute a logarithmic function, therefore providing a wide dynamic range based on a single end-point measurement. CELIA (Coupling Exponential amplification reaction to LInear Amplification) exploits a versatile biochemical circuit architecture to couple a tunable linear amplification stage - optionally embedding an inverter function - downstream of an exponential module in a one-pot format. Applied to the detection of microRNAs, CELIA provides a limit of detection in the femtomolar range and a dynamic range of six decades. This isothermal approach bypasses thermocyclers without compromising sensitivity, thereby opening the way to applications in various diagnostic assays, and providing a simplified, cost-efficient, and high throughput solution for quantitative nucleic acid analysis.

Three-Way Junction-Assisted Rolling Circle Amplification Integrated with trans-Cleavage of Cas12a for Sensitive and Reliable Detection of miRNA

MicroRNAs (miRNAs) serve a crucial role in numerous biological processes, such as acute pancreatitis development. Due to its low abundance and high similarity among homogeneous family members, sensitive and reliable detection of microRNA remains a formidable challenge. By combining the three-way junction-assisted rolling circle amplification (RCA) with the trans-cleavage of Cas12a, we propose a novel fluorescent technique for sensitive miRNA detection. In order to increase the amplification efficiency of RCA-based methods, catalytic hairpin amplification (CHA) is incorporated into the RCA process, playing the roles of specific target recognition and three-way junction formation. Consequently, the method demonstrated a six-orders-of-magnitude detection range and a LOD as low as 27 aM, making it a promising method for the early diagnosis of various diseases.

Nucleic acid-based electrochemical biosensors

Colorectal cancer, breast cancer, oxidative DNA damage, and viral infections are all significant and major health threats to human health, presenting substantial challenges in early diagnosis. In this regard, a wide range of nucleic acid-based electrochemical platforms have been widely employed as point-of-care diagnostics in health care and biosensing technologies. This review focuses on biosensor design strategies, underlying principles involved in the development of advanced electrochemical genosensing devices, approaches for immobilizing DNA on electrode surfaces, as well as their utility in early disease diagnosis, with a particular emphasis on cancer, leukaemia, oxidative DNA damage, and viral pathogen detection. Notably, the role of biorecognition elements and nanointerfaces employed in the design and development of advanced electrochemical genosensors for recognizing biomarkers related to colorectal cancer, breast cancer, leukaemia, oxidative DNA damage, and viral pathogens has been extensively reviewed. Finally, challenges associated with the fabrication of nucleic acid-based biosensors to achieve high sensitivity, selectivity, a wide detection range, and a low detection limit have been addressed. We believe that this review will provide valuable information for scientists and bioengineers interested in gaining a deeper understanding of the fabrication and functionality of nucleic acid-based electrochemical biosensors for biomedical diagnostic applications.

A dual-signal amplification strategy based on rolling circle amplification and APE1-assisted amplification for highly sensitive and specific miRNA analysis for early diagnosis of alzheimer's disease

MicroRNA (miRNA) is involved in the progression of Alzheimer's disease (AD) and emerges as a promising AD biomarker and therapeutic target. Therefore, there is an urgent need to develop convenient and precise miRNA detection methods for AD diagnosis. Herein, a dual-signal amplification strategy based on rolling circle amplification and APE1-assisted amplification for miRNA analysis for early diagnosis of AD was proposed. The strategy consisted of dumbbell-shaped probe (DP) as amplification template and a reporter probe (RP) with an AP site modification. In the presence of the target miRNA, the miRNAs bound to the toehold domain of DP and DP was activated into a circular template. Then, RCA reaction was triggered, producing a large number of long-stranded products containing repeated sequences. After RCA, APE1 enzyme recognized and removed AP site in the complex of RCA/RP products. By coupling RCA with APE1-assisted amplification, this method has high sensitivity with the limit of detection (LOD) of 1.82 fM. Moreover, by using DP as template for RCA reaction, high specificity can be achieved. By detecting miR-206 in serum using this method, the expression of miR-206 can be accurately distinguished between AD patients and healthy individuals, indicating that this method has broad application prospects in clinical diagnosis.

Importance of DNA nanotechnology for DNA methyltransferases in biosensing assays

DNA methylation is the process by which specific bases on a DNA sequence acquire methyl groups under the catalytic action of DNA methyltransferases (DNMT). Abnormal changes in the function of DNMT are important markers for cancers and other diseases; therefore, the detection of DNMT and the selection of its inhibitors are critical to biomedical research and clinical practice. DNA molecules can undergo intermolecular assembly to produce functional aggregates because of their inherently stable physical and chemical properties and unique structures. Conventional DNMT detection methods are cumbersome and complicated processes; therefore, it is necessary to develop biosensing technology based on the assembly of DNA nanostructures to achieve rapid analysis, simple operation, and high sensitivity. The design of the relevant program has been employed in life science, anticancer drug screening, and clinical diagnostics. In this review, we explore how DNA assembly, including 2D techniques like hybridization chain reaction (HCR), rolling circle amplification (RCA), catalytic hairpin assembly (CHA), and exponential isothermal amplified strand displacement reaction (EXPAR), as well as 3D structures such as DNA tetrahedra, G-quadruplexes, DNA hydrogels, and DNA origami, enhances DNMT detection. We highlight the benefits of these DNA nanostructure-based biosensing technologies for clinical use and critically examine the challenges of standardizing these methods. We aim to provide reference values for the application of these techniques in DNMT analysis and early cancer diagnosis and treatment, and to alert researchers to challenges in clinical application.

Tunable nanofluidic device for digital nucleic acid analysis

Nano/microfluidic-based nucleic acid tests have been proposed as a rapid and reliable diagnostic technology. Two key steps for many of these tests are target nucleic acid (NA) immobilization followed by an enzymatic reaction on the captured NAs to detect the presence of a disease-associated sequence. NA capture within a geometrically confined volume is an attractive alternative to NA surface immobilization that eliminates the need for sample pre-treatment (e.g. label-based methods such as lateral flow assays) or use of external actuators (e.g. dielectrophoresis) that are required for most nano/microfluidic-based NA tests. However, geometrically confined spaces hinder sample loading while making it challenging to capture, subsequently, retain and simultaneously expose target NAs to required enzymes. Here, using a nanofluidic device that features real-time confinement control via pneumatic actuation of a thin membrane lid, we demonstrate the loading of digital nanocavities by target NAs and exposure of target NAs to required enzymes/co-factors while the NAs are retained. In particular, as proof of principle, we amplified single-stranded DNAs (M13mp18 plasmid vector) in an array of nanocavities via two isothermal amplification approaches (loop-mediated isothermal amplification and rolling circle amplification).

Advances, challenges, and opportunities for food safety analysis in the isothermal nucleic acid amplification/CRISPR-Cas12a era

Global food safety stands out as a prominent public concern, affecting populations worldwide. The recurrent challenge of food safety incidents reveals the need for a robust inspection framework. In recent years, the integration of isothermal nucleic acid amplification with CRISPR-Cas12a techniques has emerged as a promising tool for molecular detection of food hazards, presenting next generation of biosensing for food safety detection. This paper provides a comprehensive review of the current state of research on the synergistic application of isothermal nucleic acid amplification and CRISPR-Cas12a technology in the field of food safety. This innovative combination not only enriches the analytical tools, but also improving assay performance such as sensitivity and specificity, addressing the limitations of traditional methods. The review summarized various detection methodologies by the integration of isothermal nucleic acid amplification and CRISPR-Cas12a technology for diverse food safety concerns, including pathogenic bacterium, viruses, mycotoxins, food adulteration, and genetically modified foods. Each section elucidates the specific strategies employed and highlights the advantages conferred. Furthermore, the paper discussed the challenges faced by this technology in the context of food safety, offering insightful discussions on potential solutions and future prospects.

Circular Single-Stranded DNA: Discovery, Biological Effects, and Applications

The field of nucleic acid therapeutics has witnessed a significant surge in recent times, as evidenced by the increasing number of approved genetic drugs. However, current platform technologies containing plasmids, lipid nanoparticle-mRNAs, and adeno-associated virus vectors encounter various limitations and challenges. Thus, we are devoted to finding a novel nucleic acid vector and have directed our efforts toward investigating circular single-stranded DNA (CssDNA), an ancient form of nucleic acid. CssDNAs are ubiquitous, but generally ignored. Accumulating evidence suggests that CssDNAs possess exceptional properties as nucleic acid vectors, exhibiting great potential for clinical applications in genetic disorders, gene editing, and immune cell therapy. Here, we comprehensively review the discovery and biological effects of CssDNAs as well as their applications in the field of biomedical research for the first time. Undoubtedly, as an ancient form of DNA, CssDNA holds immense potential and promises novel insights for biomedical research.

A dual-signal aptasensor based on cascade amplification for ultrasensitive detection of aflatoxin B1

Aflatoxin B1 (AFB1) is considered as a serious carcinogenic mycotoxin that was widely detected in grains and foods, and its sensitive analysis is of key importance to avoid the health threats for consumers. In this study, a dual-signal aptasensor based on cascade of entropy-driven strand displacement reaction (ESDR) and linear rolling circle amplification (LRCA) was fabricated for ultrasensitive determination of AFB1. At the sensing system, the complementary strand would be released after the aptamer combined with AFB1, which will bring about the functional domains exposed, triggering the subsequent ESDR. Meanwhile, the two strands that were outputted by ESDR would incur the downstream LRCA reaction to produce a pair of long strands to assist in the generation of fluorescence and absorbance signals. Under the optimized conditions, the proposed aptasensor could achieve excellent sensitivity (limit of detection, 0.427 pg/mL) with satisfactory accuracy (recoveries, 92.8-107.9 %; RSD, 2.4-5.0 %), mainly ascribed to the cascade amplification. Importantly, owing to the flexibility design of nucleic acid primer, this analytical method can be applied in monitoring various hazardous substances according to the specific requirements. Our strategy provides some novel insights at signal amplification for rapid detection of AFB1 and other targets.

Construction of single-molecule counting-based biosensors for DNA-modifying enzymes: A review

DNA-modifying enzymes act as critical regulators in a wide range of genetic functions (e.g., DNA damage & repair, DNA replication), and their aberrant expression may interfere with regular genetic functions and induce various malignant diseases including cancers. DNA-modifying enzymes have emerged as the potential biomarkers in early diagnosis of diseases and new therapeutic targets in genomic research. Consequently, the development of highly specific and sensitive biosensors for the detection of DNA-modifying enzymes is of great importance for basic biomedical research, disease diagnosis, and drug discovery. Single-molecule fluorescence detection has been widely implemented in the field of molecular diagnosis due to its simplicity, high sensitivity, visualization capability, and low sample consumption. In this paper, we summarize the recent advances in single-molecule counting-based biosensors for DNA-modifying enzyme (i.e, alkaline phosphatase, DNA methyltransferase, DNA glycosylase, flap endonuclease 1, and telomerase) assays in the past four years (2019 - 2023). We highlight the principles and applications of these biosensors, and give new insight into the future challenges and perspectives in the development of single-molecule counting-based biosensors.

Tumor-associated antigen-specific cell imaging based on upconversion luminescence and nucleic acid rolling circle amplification

Tumor-associated antigen (TAA)-based diagnosis has gained prominence for early tumor screening, treatment monitoring, prognostic assessment, and minimal residual disease detection. However, limitations such as low sensitivity and difficulty in extracting non-specific binding membrane proteins still exist in traditional detection methods. Upconversion luminescence (UCL) exhibits unique physical and chemical properties under wavelength near-infrared light excitation. Rolling circle amplification (RCA) is an efficient DNA amplification technique with amplification factors as high as 105. Therefore, the above two excellent techniques can be employed for highly accurate imaging analysis of tumor cells. Herein, we developed a novel nanoplatform for TAA-specific cell imaging based on UCL and RCA technology. An aptamer-primer complex selectively binds to Mucin 1 (MUC1), one of TAA on cell surface, to trigger RCA reaction, generating a large number of repetitive sequences. These sequences provide lots of binding sites for complementary signal probes, producing UCL from lanthanide-doped upconversion nanoparticles (UCNPs) after releasing quencher group. The experimental results demonstrate the specific attachment of upconversion nanomaterials to cancer cells which express a high level of MUC1, indicating the potential of UCNPs and RCA in tumor imaging.

Signal Amplification by Spatial Concentration for Immunoassay on Cellulose Media

Immunoassay is one of the most common bioanalytical techniques from lab-based to point-of-care settings. Over time, various approaches have been developed to amplify signals for greater sensitivity. However, the need for effective, versatile, and simple signal amplification methods persists yet. This paper presents a novel signal amplification method for immunoassay that utilizes spatial concentration of a cellulose-based plate possessing sensor transducers, specifically gold nanoparticles. By modifying the dimensions of the plate, the density of nanoparticles increased, resulting in intensified color signals. The coating material, polydopamine, which is utilized to protect the gold nanoparticles. Chemical changes in nanocomposites are characterized using scanning electron microscopy, Raman spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. The application of this method to colorimetric quantification demonstrated great consistency across various concentrations of nanoparticles, with better reliability at lower concentration ranges. A model immunoassay is designed to evaluate the analytical performance. As a result, this method successfully corrected a false-negative result with a lowered Kd of 0.509 pmol per zone. This method shows strong signal enhancement capability that can correct false-negative signals in the immunoassays, with potential benefits including versatility, simplicity, low cost, and the ability to operate multiple plates simultaneously.

Microfluidic systems for infectious disease diagnostics

Microorganisms, encompassing both uni- and multicellular entities, exhibit remarkable diversity as omnipresent life forms in nature. They play a pivotal role by supplying essential components for sustaining biological processes across diverse ecosystems, including higher host organisms. The complex interactions within the human gut microbiota are crucial for metabolic functions, immune responses, and biochemical signalling, particularly through the gut-brain axis. Viruses also play important roles in biological processes, for example by increasing genetic diversity through horizontal gene transfer when replicating inside living cells. On the other hand, infection of the human body by microbiological agents may lead to severe physiological disorders and diseases. Infectious diseases pose a significant burden on global healthcare systems, characterized by substantial variations in the epidemiological landscape. Fast spreading antibiotic resistance or uncontrolled outbreaks of communicable diseases are major challenges at present. Furthermore, delivering field-proven point-of-care diagnostic tools to the most severely affected populations in low-resource settings is particularly important and challenging. New paradigms and technological approaches enabling rapid and informed disease management need to be implemented. In this respect, infectious disease diagnostics taking advantage of microfluidic systems combined with integrated biosensor-based pathogen detection offers a host of innovative and promising solutions. In this review, we aim to outline recent activities and progress in the development of microfluidic diagnostic tools. Our literature research mainly covers the last 5 years. We will follow a classification scheme based on the human body systems primarily involved at the clinical level or on specific pathogen transmission modes. Important diseases, such as tuberculosis and malaria, will be addressed more extensively.

Self-Priming Cyclic Amplification Accelerating CRISPR Sensor for Sensitive and Specific MicroRNA Analysis with No Background

In this work, we demonstrate for the first time the application of the phosphorothioated-terminal hairpin formation and self-priming extension (PS-THSP) reaction for miRNA assays. A self-priming amplification accelerating CRISPR sensor was well-established for sensitive and specific miRNA detection by integrating the PS-THSP reaction and CRISPR/Cas12a system. The sensor consists of three steps: (1) the formation of a complete PS-THSP template in the presence of target miRNA and ligase; (2) the exponential isothermal amplification of the PS-THSP reaction under the action of DNA polymerase; (3) the activation of the CRISPR/Cas12a fluorescence system to generate signals. We used miR-21 as a model target. The sensor can achieve sensitive detection of miR-21 without the involvement of any primers, and the special design of the CRISPR proto-spacer neighbor motif (PAM) sequence effectively avoids the interference of the background signal. In addition, the sensor can not only identify single-base mutant homologous sequences but also show stable performance in complex biological matrices. We have successfully used this sensor to accurately analyze miR-21 in different cell lines and real clinical samples, demonstrating its great potential in clinical diagnosis.

Colorimetric detection of African swine fever (ASF)-associated microRNA based on rolling circle amplification and salt-induced gold nanoparticle aggregation

African swine fever (ASF) is a severe viral disease with a high mortality rate in domestic and wild pigs, for which no effective vaccine and antiviral drugs are available. The great infectivity of the ASF virus highlights the need for sensitive, simple, and on-site detection assays of ASF. We herein developed a colorimetric sensing strategy for the detection of an ASF-associated miRNA, based on isothermal rolling circle amplification (RCA) and salt-induced gold nanoparticle aggregation. Ssc-miR-451 was selected as the target ASF biomarker due to its high expression in ASF virus-infected pigs. With a red-purple-blue color shifting, this biosensing platform offers convenient detection of ssc-miR-451 with a UV-Vis spectrometer or the naked eye. The proposed assay exhibits a dose-response relationship between the optical absorbance ratio (A525/A640) and the amounts of ssc-miR-451, with a detection limit calculated as 3.56 fmol (equivalent to 11.86 pM in 300 μL reaction mixture). This assay's coefficient of variation (CV%) was determined to be less than 5.95%, revealing its reproducibility is satisfactory. In addition, the newly developed method was successfully applied in the detection of spiked ssc-miR-451 in pig serum samples. In light of its simplicity, convenience (colorimetric), sensitivity, and energy efficiency (isothermal amplification), this biosensing strategy presents great potential to be applied in the local swine industry and pig farming for screening of viral diseases affecting pigs.

On-chip screening of SARS-CoV-2 cDNA by LAMP-integrated rotational diffusometry

The unprecedented pandemic has raised the demand for prompt, precise, and large-scale virus detection techniques to control the transmission of contagious illnesses. In this study, a loop-mediated isothermal amplification (LAMP) based on-chip platform was developed to address this challenge using rotational diffusometry and functionalized Janus particles. A recombinant plasmid containing a cDNA sequence of the SARS-CoV-2 non-structural protein 2 (nsp2) gene was employed here as a proof-of-concept for COVID-19 detection. Specifically, designed primers and the functionalized Janus particles were simultaneously loaded on a microfluidic chip to perform the LAMP reaction on a hot plate. The optimal Janus particle concentrations for diffusometric analysis were thoroughly validated, and the performance of the on-chip LAMP reaction was assessed using thermal image analysis. Utilization of the highly sensitive rotational diffusometry achieved a limit of detection of 1 pg/μL in just 10 min with a sample volume of 20 μL. Our method delivered a tenfold higher sensitivity than the conventional method by utilizing only half of its usual required time. Overall, this study proposes a potential nucleic acid (NA) amplification device to aid the rapid diagnosis of various diseases by modifying the primers for different target genes.

Smartphone-assisted fluorescence-based detection of sunrise-type smart amplification process and a 3D-printed ultraviolet light-emitting diode device for the diagnosis of tuberculosis

Accurate and rapid diagnosis of infectious diseases plays a key role in clinical practice, especially in resource-limited countries. In this study, we integrated sunrise-type smart amplification process (s-SmartAmp), a convenient and sensitive isothermal amplification method for nucleic acid, into a portable 3D-printed device equipped with smartphone-assisted image analysis capabilities to develop a novel fluorescence-based sensing system for the on-site diagnosis of tuberculosis (TB). To increase the efficiency of fluorescence (or Förster) resonance energy transfer, two types of sunrise probe systems were compared to detect the IS6110 DNA sequence of TB. Subsequently, linear regression was conducted to compare the performance of s-SmartAmp and loop-mediated isothermal amplification (LAMP). The results indicated that, compared with LAMP, s-SmartAmp yielded more stable and precise results with lower background interference and high linear correlation coefficients (R2 = 0.9994 and 1, respectively) for the FAM-TAMRA and FITC-BHQ-1 probe system. The detection time was 45 min with a detection limit of 10 fg/μL. To evaluate the performance of our proposed on-site sensing system, we used s-SmartAmp 3D-printed ultraviolet light-emitting diode device to test multiple clinical samples of TB. Our findings suggest that the proposed system has the potential to achieve accurate and rapid on-site diagnosis of TB.

Construction of Fluorescent G-Quadruplex Nanowires for Label-Free and Accurate Monitoring of Circular RNAs in Breast Cancer Cells and Tissues with Low Background

Circular RNAs (circRNAs) represent an emerging category of endogenous transcripts characterized by long half-life time, covalently closed structures, and cell-/tissue-specific expression patterns, making them potential disease biomarkers. Herein, we demonstrate the construction of fluorescent G-quadruplex nanowires for label-free and accurate monitoring of circular RNAs in breast cancer cells and tissues by integrating proximity ligation-rolling circle amplification cascade with lighting up G-quadruplex. The presence of target circRNA facilitates the SplintR ligase-mediated ligation of the padlock probe. Upon the addition of primers, the ligated padlock probe can serve as a template to initiate subsequent rolling circle amplification (RCA), generating numerous long G-quadruplex nanowires that can incorporate with thioflavin T (ThT) to generate a remarkably improved fluorescence signal. Benefiting from good specificity of SplintR ligase-mediated ligation reaction and exponential amplification efficiency of RCA, this strategy can sensitively detect target circRNA with a limit of detection of 4.65 × 10-18 M. Furthermore, this method can accurately measure cellular circRNA expression with single-cell sensitivity and discriminate the circRNA expression between healthy para-carcinoma tissues and breast cancer tissues, holding great potential in studying the pathological roles of circRNA and clinic diagnostics.

A robust tag-free aptasensor for fluorescent detection of kanamycin assisted by signal intensification potency of rolling circle amplification

Rolling circle amplification (RCA) process as an excellent DNA amplifier strategy possesses the merits of high performance and easy operation. In this research, a sensitive RCA-based fluorescent aptasensor was fabricated for the detection of kanamycin residues in food. The aptasensing approach consisted of two main steps; immobilization of biotinylated kanamycin aptamer on streptavidin magnetic beads (SMB) and separation of free complementary strands (CS) from the SMB-aptamer/kanamycin at the first step. For the second step, RCA procedure was applied as signal magnifier and SYBR Green was added as fluorescent indicator dye. The linear relation between the aptasensor response and kanamycin concentration was obtained from 5 nM to 100 nM with the detection limit of 1.93 nM (S/N = 3). The aptasensor displayed satisfactory selectivity among other antibiotics. The developed aptasensor is reliable for monitoring kanamycin in milk as a common foodstuff.

One-Base-Gap Circular Probe-Mediated Dual Amplification for Isothermal Detection of N6-Methyladenosine Modifications

N6-Methyladenosine (m6A) stands out as the predominant internal modification in mammalian RNA, exerting crucial regulatory functions in the metabolism of mRNA. Currently available methods have been limited by an inability to quantify m6A modification at precise sites. In this work, we screened a Bst 2.0 warm start DNA polymerase with the capability of discriminating m6A from adenosine (A) and developed a robust m6A RNA detection method that enables isothermal and ultrasensitive quantification of m6A RNA at single-base resolution. The detection limit of the assay could reach about 0.02 amol, and the quantitative accuracy of the assay was verified in real cell samples. Furthermore, we applied this assay to single-cell analysis and found that the coefficients of variation of the MALAT1 m6A 2611 site in glioblastoma U251 cells showed over 20% higher than in oligodendrocytes MO3.13 cells. This method provides a highly sensitive analytical tool for site-specific m6A detection and quantification, which is expected to provide a basis for precise disease diagnosis and epigenetic transcriptional regulation.

Single-Cell Genotyping of Single-Nucleotide Mutations Using In Situ Allele-Specific Loop-Mediated Isothermal Amplification

Single-nucleotide mutations (SNMs) in the bacterial genome may cause antibiotic resistance. The visualization of SNMs can indicate antibiotic resistance phenotypes at the single-cell level but remains challenging. Herein, we proposed an in situ allele-specific isothermal amplification proceeded inside cells, allowing us to image bacterial genes with single-nucleotide resolution. The primer for loop-mediated isothermal amplification (LAMP) was designed with artificial mismatch bases to serve as an allele-specific probe, endowing LAMP to specifically amplify genes with SNMs. Due to the high amplification efficiency of LAMP, the method termed AlleLAMP can generate high gain for imaging SNMs and precisely quantify mutated quinolone-resistant Salmonella in bacterial mixture. We utilized AlleLAMP to survey the selection of antibiotic resistance under the preservative stress and found that the mutant quinolone-resistant strain owned a survival advantage over the wild-type quinolone-sensitive strain under the stress of preservatives. AlleLAMP can serve as a single-cell tool for analyzing the relationship between bacterial genotype and phenotype.

Hairpin/DNA Ring Ternary Complex Initiated Rolling Circle Amplification for an Elevated Accuracy and Its Application in Analyzing Let-7a

Rolling circle amplification (RCA) is an attractive isothermal nucleic acid amplification approach and has been widely applied in constructing a variety of biosensors. However, the inevitable drawbacks of lacking enough selectivity greatly hindered further applications of RCA-based approaches. Here, we develop a novel RCA-based approach by integrating the specific target recognition capability of the hairpin/DNA ring ternary complex and multiple signal amplification and successfully applied it for let-7a detection. In this method, let-7a specifically unfolds the hairpin probe (Hp probe) in the ternary complex to induce target recycle and RCA- and DNAzyme-based signal generation. Based on this, the established approach exhibits a high selectivity to let-7a, and the response of the approach to one base pair mismatched sequences was 24.9%, indicating a significantly improved specificity. Meanwhile, the limit of detection is as low as 342 aM, which can meet the high requirement for a trace amount of miRNA detection. In all, we believe that the established approach can offer a new avenue for miRNA detection and post-tumor care.

Dual-mode DNA walker-based optical fiber biosensor for ultrasensitive detection of microRNAs

We present a novel dual-mode DNA-walker based optical fiber biosensor (DMDW-Opt biosensor) for sensitive assay of micro-RNAs in bio-samples. In the sensor system, we develop a new strategy for the cascade amplification, DNA-walker/rolling cycle amplification (RCA), by the use of the residue track of the walker. The strategy can significantly improve the response of the sensor and avoid any tedious operation procedure. Dual-mode readouts, i.e., fluorescence and chemiluminescence, are measured independently without interfering with each other to achieve reliable and accurate analysis. Optical fibers with the surface modified by gold nanoparticles are utilized as the support for fabrication of the sensor, which would be benefit for developing miniaturized and portable sensing devices. The performance of the proposed method is evaluated by using micro-RNAs (MiR-155 and MiR-21) as the analytical target. The method is successfully applied for accurate determination of micoRNAs in human serum and MCF-7 cells. Our method can perform sensitive assays of MiR-155 with limit-of-detection as low as 97.72 fM and 11.22 fM, MiR-21 with limit-of-detection as low as 107.15 fM and 8.32 fM for the fluorescence- and the chemiluminescence-readout respectively, and the biosensor exhibits excellent specificity, reproducibility and storage stability, indicating its valuable potential applications for sensing trace-amount targets in complicated real samples.

A differential strategy to enhance the anti-interference ability of molecularly imprinted electrochemiluminescence sensor with a semi-logarithmic calibration curve

The non-specific adsorption behaviors of various interferents on the surface of a molecularly imprinted polymer (MIP) are adverse for the selectivity of an MIP-based sensor, which can be overcome via a differential strategy by using the differential signal between MIP- and non-imprinted polymer (NIP)-based sensors. However, the normal differential mode is not suitable for the MIP-based sensors with non-linear calibration curves. Herein, an improved differential strategy is reported for an MIP-based sensor with a semi-logarithmic calibration curve, demonstrated by an electrochemiluminescence (ECL) sensor for dopamine (DA). Glassy carbon electrode (GCE) was modified by the mixture of g-C3N4, TiO2 nanoparticles (NPs) and carbon nanotubes (CNTs). MIP membrane for DA was fabricated on the surface of g-C3N4/TiO2NPs/CNTs/GCE using chitosan for film-forming, obtained MIP@GCE. To enhance the anti-interference ability of the MIP-based DA sensor, the difference between exponential functions ECL intensities of MIP@GCE and NIP@GCE is used as the analytical signal in the improved differential strategy. The differential signal was increased linearly with increasing DA concentration ranging from 10 pM to 0.10 μM, with the detection limit of 5.6 pM. The interference level of Cu2+ on DA determination in the improved differential mode is only 9.7% of that in the normal MIP mode. The improved differential strategy can be used in other MIP-based sensors with semi-logarithmic calibration curves.

Accurate quantification of DNA content in DNA hydrogels prepared by rolling circle amplification

Accurate quantification of polymerized DNA in rolling circle amplification (RCA)-based hydrogels is challenging due to the high viscosity of these materials, however, it can be achieved with a photometric nucleotide depletion assay or qPCR. We show that the DNA content strongly depends on the template sequence and correlates with the mechanical properties of the hydrogels.

A specific and low background nucleic acids sensing strategy based on rolling circle amplification coupled with a magnetic DNA machine

We propose a universal fluorescence method for detection of nucleic acids based on rolling circle amplification (RCA) combined with a magnetic DNA machine and using dengue virus nucleic acids as an example target. RCA specifically amplifies the target and yields a large number of initiators employing heat-labile double-stranded DNase. The magnetic DNA machine produces a fluorescence signal and eliminates background noise. This method achieved a wide linear range, promising recovery and ultrahigh recognition specificity for one-base mismatches, and indicates the potential application of this sensing strategy in the clinical diagnosis of nucleic acids of pathogens.

Point-of-Care Diagnostic Devices for Detection of Escherichia coli O157:H7 Using Microfluidic Systems: A Focused Review

Bacterial infections represent a serious and global threat in modern medicine; thus, it is very important to rapidly detect pathogenic bacteria, such as Escherichia coli (E. coli) O157:H7. Once treatments are delayed after the commencement of symptoms, the patient's health quickly deteriorates. Hence, real-time detection and monitoring of infectious agents are highly critical in early diagnosis for correct treatment and safeguarding public health. To detect these pathogenic bacteria, many approaches have been applied by the biosensors community, for example, widely-used polymerase chain reaction (PCR), enzyme-linked immunosorbent assay (ELISA), culture-based method, and adenosine triphosphate (ATP) bioluminescence. However, these approaches have drawbacks, such as time-consumption, expensive equipment, and being labor-intensive, making it critical to develop ultra-sensitive and highly selective detection. The microfluidic platform based on surface plasmon resonance (SPR), electrochemical sensing, and rolling circle amplification (RCA) offers proper alternatives capable of supplementing the technological gap for pathogen detection. Note that the microfluidic biochip allows to develop rapid, sensitive, portable, and point-of-care (POC) diagnostic tools. This review focuses on recent studies regarding accurate and rapid detection of E. coli O157:H7, with an emphasis on POC methods and devices that complement microfluidic systems. We also examine the efficient whole-body detection by employing antimicrobial peptides (AMPs), which has attracted growing attention in many applications.

A review of advances in aptamer-based cell detection technology

Since cells are the basic structural and functional units of organisms, the detection or quantitation of cells is one of the most common basic problems in life science research. The established cell detection techniques mainly include fluorescent dye labeling, colorimetric assay, and lateral flow assay, all of which employ antibodies as cell recognition elements. However, the widespread application of the established methods generally dependent on antibodies is limited, because the preparation of antibodies is complicated and time-consuming, and unrecoverable denaturation is prone to occur with antibodies. By contrast, aptamers that are generally selected through the systematic evolution of ligands by exponential enrichment can avoid the disadvantages of antibodies due to their controllable synthesis, thermostability, and long shelf life, etc. Accordingly, aptamers may serve as novel molecular recognition elements like antibodies in combination with various techniques for cell detection. This paper reviews the developed aptamer-based cell detection methods, mainly including aptamer-fluorescent labeling, aptamer-isothermal amplification assay, electrochemical aptamer sensor, aptamer-based lateral flow analysis, and aptamer-colorimetric assay. The principles, advantages, progress of application in cell detection and future development trend of these methods were specially discussed. Overall, different assays are suitable for different detection purposes, and the development of more accurate, economical, efficient, and rapid aptamer-based cell detection methods is always on the road in the future. This review is expected to provide a reference for achieving efficient and accurate detection of cells as well as improving the usefulness of aptamers in the field of analytical applications.

Mismatched duplexed aptamer-isothermal amplification-based nucleic acid-nanoflower for fluorescent detection of okadaic acid

We developed a highly sensitive fluorescent assay to detect okadaic acid (OA), a prevalent aquatic toxin posing serious health risks. Our approach uses a mismatched duplexed aptamer (DA) immobilized on streptavidin-conjugated magnetic beads (SMBs) to create a DA@SMB complex. In the presence of OA, the cDNA unwinds, hybridizes with a G-rich segment pre-encoding circular template (CT), and undergoes rolling circle amplification (RCA) to produce G-quadruplexes, which are detected using the fluorescent dye thioflavine T (ThT). The method has a LOD of 3.1 × 10^-3 ng/mL, a linear range of 0.1 ∼ 1.0 × 10³ ng/mL, and was successfully applied to shellfish samples with spiked recoveries of 85.9% ∼ 102.2% and RSD less than 13%. Furthermore, instrumental analysis confirmed the accuracy and reliability of this rapid detection method. Overall, this work represents a significant advancement in the field of rapid aquatic toxin detection and has important implications for public health and safety.

An ultra-sensitive one-pot RNA-templated DNA ligation rolling circle amplification-assisted CRISPR/Cas12a detector assay for rapid detection of SARS-CoV-2

Rapid, sensitive, and one-pot diagnosis of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) plays an extremely important role in point-of-care testing (POCT). Herein, we report an ultra-sensitive and rapid one-pot enzyme-catalyzed rolling circle amplification-assisted CRISPR/FnCas12a assay, termed OPERATOR. OPERATOR employs a single well-designed single-strand padlock DNA, containing a protospacer adjacent motif (PAM) site and a sequence complementary to the target RNA which procedure converts and amplifies genomic RNA to DNA by RNA-templated DNA ligation and multiply-primed rolling circle amplification (MRCA). The MRCA amplicon of single-stranded DNA is cleaved by the FnCas12a/crRNA complex and detected via a fluorescence reader or lateral flow strip. OPERATOR presents outstanding advantages including ultra-sensitivity (1.625 copies per reaction), high specificity (100%), rapid reaction speed (∼30 min), easy operation, low cost, and on-spot visualization. Furthermore, we established a POCT platform by combining OPERATOR with rapid RNA release and a lateral flow strip without professional equipment. The high performance of OPERATOR in SARS-CoV-2 tests was confirmed using both reference materials and clinical samples, and the results suggest that is readily adaptable for point-of-care testing of other RNA viruses.

Electrical Nanobiosensors for Nucleic Acid Based Diagnostics

Recent advances in nanotechnologies have promoted the iterative updating of nucleic acid sensors. Among various sensing technologies, the electrical nanobiosensor is regarded as one of the most promising prospects to achieve rapid, precise, and point-of-care nucleic acid based diagnostics. In this Perspective, we introduce recent progresses in electrical nanobiosensors for nucleic acid detection. First, the strategies for improving detection performance are summarized, including chemical amplification and electrical amplification. Then, the detection mechanism of electrical nanobiosensors, such as electrochemical biosensors, field-effect transistors, and photoelectric enhanced biosensors, is illustrated. At the same time, their applications in cancer screening, pathogen detection, gene sequencing, and genetic disease diagnosis are introduced. Finally, challenges and future prospects in clinical application are discussed.

Ultrasensitive Detection of MicroRNA in Human Saliva via Rolling Circle Amplification Using a DNA-Decorated Graphene Oxide Sensor

MicroRNAs (miRNAs) are a family of conserved small noncoding RNAs whose expression is associated with many diseases, including cancer. Salivary miRNAs are gaining popularity as noninvasive diagnostic biomarkers for cancer and other systemic disorders, but their use is limited by their low abundance and complicated detection procedure. Herein, we present a novel self-assembly approach based on rolling circle amplification (RCA) and graphene oxide (GO) for the ultrasensitive detection of miRNA21 and miRNA16 (miRNA oral cancer biomarkers in human saliva). First, target miRNA hybridizes with the RCA template. In the presence of DNA polymerase, the RCA reaction is induced and sequences matching the template are generated. Then, a nicking enzyme cuts the long ssDNA product into tiny pieces to obtain the amplified products. The DNA-decorated GO sensor was fabricated by preabsorbing the ssDNA fluorescence-labeled probe on the GO surface, resulting in fluorescence quenching. The DNA-decorated GO sensor could detect the amplified product via the self-assembly of dsDNA, leading to the desorption and recovery of the fluorescence-labeled probe. Under optimal conditions, the proposed system exhibited ultrasensitive detection; the detection limits of miRNA16 and miRNA21 were 8.81 and 3.85 fM, respectively. It showed a wide range of detection between 10 fM and 100 pM for miRNA16 and between 10 fM and 1 nM for miRNA16. It demonstrated high selectivity, distinguishing between 1- and 3-mismatch nucleotides in target miRNA. Overall, our proposed DNA-decorated GO sensor can accurately detect the salivary miRNAs and may potentially be used for the diagnosis and screening of early-stage oral cancer.

Signal Amplification-Based Biosensors and Application in RNA Tumor Markers

Tumor markers are important substances for assessing cancer development. In recent years, RNA tumor markers have attracted significant attention, and studies have shown that their abnormal expression of post-transcriptional regulatory genes is associated with tumor progression. Therefore, RNA tumor markers are considered as potential targets in clinical diagnosis and prognosis. Many studies show that biosensors have good application prospects in the field of medical diagnosis. The application of biosensors in RNA tumor markers is developing rapidly. These sensors have the advantages of high sensitivity, excellent selectivity, and convenience. However, the detection abundance of RNA tumor markers is low. In order to improve the detection sensitivity, researchers have developed a variety of signal amplification strategies to enhance the detection signal. In this review, after a brief introduction of the sensing principles and designs of different biosensing platforms, we will summarize the latest research progress of electrochemical, photoelectrochemical, and fluorescent biosensors based on signal amplification strategies for detecting RNA tumor markers. This review provides a high sensitivity and good selectivity sensing platform for early-stage cancer research. It provides a new idea for the development of accurate, sensitive, and convenient biological analysis in the future, which can be used for the early diagnosis and monitoring of cancer and contribute to the reduction in the mortality rate.

A universal and specific RNA biosensor via DNA circuit-mediated PAM-independent CRISPR/Cas12a and PolyA-rolling circle amplification

Point of care testing (POCT) has important clinical significance for the diagnosis and prognosis evaluation of diseases. At present, the biosensor based on CRISPR/Cas12a has become a powerful diagnostic tool due to its high sensitivity. However, CRISPR/Cas12a requires PAM sequence to recognize target double strand and only can recognize specific sequence, so it is not universal. The current RNA detection techniques either lack consideration for specificity and universality, are expensive and difficult, or both. Therefore, it is crucial to create a CRISPR/Cas12a-based RNA detection system that is easy to use, cheap, specific, and universal in order to further its use in molecular diagnostics. Here, we established a DNA circuit-mediated PAM-independent CRISPR/Cas12a coupled PolyA-rolling circle amplification for RNA detection biosensor, namely DCPRBiosensor. The DCPRBiosensor not only functions as a simple, inexpensive, and highly sensitive RNA detection sensor, but it also boasts innovative specificity and universality features. More importantly, DCPRBiosensor removes the PAM restriction of CRISPR/Cas12a. The DCPRBiosensor's detection limit reached 100 aM and it had a linear relationship between 100 aM and 10 pM. We detected four piRNAs to verify the universality and stability of DCPRBiosensor. Then, we verified that DCPRBiosensor has good discrimination ability for single-base mismatch. Finally, we successfully detected piRNA in DLD-1 and HCT-116 cells and urine mixed samples within 4.5 h. In conclusion, we believe that DCPRBiosensor will have a substantial impact on both the development of CRISPR/as12a's applications and the investigation of the clinical value of piRNA.

European Society of Toxicologic Pathology (Pathology 2.0 Molecular Pathology Special Interest Group): Review of In Situ Hybridization Techniques for Drug Research and Development

In situ hybridization (ISH) is used for the localization of specific nucleic acid sequences in cells or tissues by complementary binding of a nucleotide probe to a specific target nucleic acid sequence. In the last years, the specificity and sensitivity of ISH assays were improved by innovative techniques like synthetic nucleic acids and tandem oligonucleotide probes combined with signal amplification methods like branched DNA, hybridization chain reaction and tyramide signal amplification. These improvements increased the application spectrum for ISH on formalin-fixed paraffin-embedded tissues. ISH is a powerful tool to investigate DNA, mRNA transcripts, regulatory noncoding RNA, and therapeutic oligonucleotides. ISH can be used to obtain spatial information of a cell type, subcellular localization, or expression levels of targets. Since immunohistochemistry and ISH share similar workflows, their combination can address simultaneous transcriptomics and proteomics questions. The goal of this review paper is to revisit the current state of the scientific approaches in ISH and its application in drug research and development.

Functional DNA sensors integrated with nucleic acid signal amplification strategies for non-nucleic acid targets detection

In addition to carrying and transmitting genetic material, some DNA molecules have specific binding ability or catalytic function. DNA with this special function is collectively referred to as functional DNA (fDNA), such as aptamer, DNAzyme and so on. fDNA has the advantages of simple synthetic process, low cost and low toxicity. It also has high chemical stability, recognition specificity and biocompatibility. In recent years, fDNA biosensors have been widely investigated as signal recognition elements and signal transduction elements for the detection of non-nucleic acid targets. However, the main problem of fDNA sensors is their limited sensitivity to trace targets, especially when the affinity of fDNA to the targets is low. To further improve the sensitivity, various nucleic acid signal amplification strategies (NASAS) are explored to improve the limit of detection of fDNA. In this review, we will introduce four NASAS (hybridization chain reaction, entropy-driven catalysis, rolling circle amplification, CRISPR/Cas system) and the corresponding design principles. The principle and application of these fDNA sensors integrated with signal amplification strategies for detection of non-nucleic acid targets are summarized. Finally, the main challenges and application prospects of NASAS integrated fDNA biosensing system are discussed.

Recent advances of fluorescent sensors for bacteria detection-A review

Bacterial infections have become a global public health problem. Rapid and sensitive bacterial detection is of great importance for human health. Among various sensor systems, fluorescence sensor is rapid, portable, multiplexed, and cost-efficient. Herein, we reviewed the current trends of fluorescent sensors for bacterial detection from three aspects (response materials, target and recognition way). The fluorescent materials have the advantages of high fluorescent strength, high stability, and good biocompatibility. They provide a new path for bacterial detection. Several recent fluorescent nanomaterials for bacterial detection, including semiconductor quantum dots (QDs), carbon dots (CDs), up-conversion nanoparticles (UCNPs) and metal organic frameworks (MOFs), were introduced. Their optical properties and detection mechanisms were analyzed and compared. For different response targets in the detection process, we studied the fluorescence strategy using DNA, bacteria, and metabolites as the response target. In addition, we classified the recognition way between nanomaterial and target, including specific recognition methods based on aptamers, antibodies, bacteriophages, and non-specific recognition methods based on biological functional materials. The characteristics of different recognition methods were summarized. Finally, the weaknesses and future development of bacterial fluorescence sensor were discussed. This review provides new insights into the application of fluorescent sensing systems as an important tool for bacterial detection.

Visual Assay for Methicillin-Resistant Staphylococcus aureus Based on Rolling Circular Amplification Triggering G-Quadruplex/Hemin DNAzyme Proximity Assembly

Nowadays, infections caused by methicillin-resistant Staphylococcus aureus (MRSA) have constituted a new challenge for anti-infective treatment. Precise identification and rapid clinical diagnostics of MRSA from other methicillin-sensitive strains entail assays with robust diagnostic efficiency and simple operation steps. Sensitive detection of MecA gene is promising to indicate MRSA infection, but it is challenged by the lack of isothermal and simple strategies. A visual assay based on isothermal rolling circular amplification and G-quadruplex/hemin (G4/hemin) DNAzyme proximity assembly was proposed for the immediate, efficient, and cost-effective detection of MecA in simple operation steps and in a single tube. The presence of MecA specifically drove the formation of circular templates, which further triggered isothermal amplification. The amplified product offered abundant binding sites for DNA-grafted hemin probes to form a novel proximity-assembled G4/hemin DNAzyme structure for colorimetric changing diagnosis. This tandem-repeated novel DNAzyme possessed higher catalytic activity and a lower background signal than traditional G4/hemin DNAzyme, ensuring sensitive discrimination of MRSA (limit of detection: 9.6 pM). Assay stability and antimatrix interference capability enable clinical application, which shows compared diagnostic ability with classic methods (100% sensitivity and 100% specificity) but possesses more simplified procedures and shorter turnaround time (<6 h). This colorimetric strategy in a nonsite-specific and hypersensitive manner holds foreseeable prospects in clinical diagnostic and research applications.

The self-powered electrochemical biosensing platform with multi-amplification strategy for ultrasensitive detection of microRNA-155

A self-powered biosensor (SPB) was constructed for the ultra-sensitive detection of microRNA-155 (miR-155) by combining a capacitor/enzymatic biofuel cell (EBFC), a strategy of rolling circle amplification (RCA) and a digital multimeter (DMM). The experimental results show that the sensitivity of the assembled EBFC-SPB can reach 15.85 μA/pM with the action of matching capacitor, which is 513% of that without capacitor (3.09 μA/pM). This achieves the first signal amplification. Furthermore, when the target miR-155 triggers RCA, electrons are continuous generated and flow to the biocathode through the external circuit to catalyze the reduction of oxygen and release [Ru(NH₃)₆]³⁺ electron acceptor. This achieves the second signal amplification. Finally, DMM is used to convert the signal into instantaneous current and amplify it for real-time reading. This achieves the third signal amplification. Therefore, the limit of detection (LOD) of the developed biosensor is as low as 0.17 fM (S/N = 3), and the linear range is between 0.5 fM and 10,000 fM, indicating that the EBFC-SPB has a broad application prospect for cancer marker of miR-155 with ultrasensitive detection.