Characterizing dissolved organic matter in aquatic environments by size exclusion chromatography coupled with multiple detectors

High-Resolution Mass Spectrometry Combined with Reactive Oxygen Species Reveals Differences in Photoreactivity of Dissolved Organic Matter from Microplastic Sources in Aqueous Environments

Microplastics (MPs)-derived dissolved organic matter (MPs-DOM) is becoming a non-negligible source of DOM pools in aquatic systems, but there is limited understanding about the photoreactivity of different MPs-DOM. Herein, MPs-DOM from polystyrene (PS), polyethylene terephthalate (PET), poly(butylene adipate-co-terephthalate) (PBAT), PE, and polypropylene (PP), representing aromatic, biodegradable, and aliphatic plastics, were prepared to examine their photoreactivity. Spectral and high-resolution mass spectrometry analyses revealed that PS/PET/PBAT-DOM contained more unsaturated aromatic components, whereas PE/PP-DOM was richer in saturated aliphatic components. Photodegradation experiments observed that unsaturated aromatic molecules were prone to be degraded compared to saturated aliphatic molecules, leading to a higher degradation of PS/PET/PBAT-DOM than PE/PP-DOM. PS/PET/PBAT-DOM was mainly degraded by hydroxyl (•OH) via attacking unsaturated aromatic structures, whereas PE/PP-DOM by singlet oxygen (1O2) through oxidizing aliphatic side chains. The [•OH]ss was 1.21-1.60 × 10-4 M in PS/PET/PBAT-DOM and 0.97-1.14 × 10-4 M in PE/PP-DOM, while the [1O2]ss was 0.90-1.35 × 10-12 and 0.33-0.44 × 10-12 M, respectively. This contributes to the stronger photoreactivity of PS/PET/PBAT-DOM with a higher unsaturated aromatic degree than PE/PP-DOM. The photodegradation of MPs-DOM reflected a decreasing tendency from aromatic-unsaturated molecules to aliphatic-saturated molecules. Special attention should be paid to the photoreactivity and environmental impacts associated with MPs-DOM containing highly unsaturated aromatic compounds.

Facile fluorescence detection of malachite green in fish using molecularly imprinted polymers doped CdTe quantum dots based system

Malachite green (MG) possesses high toxicity, therefore, the detection of MG in fish tissues is of vital importance. A novel core-shell MIPs doped CdTe quantum dots coated silica nanoparticles (CdTe-MIP/SiO2 NPs) were synthesized via a simple one-pot strategy. The materials were characterized carefully. The resulting CdTe-MIP/SiO2 NPs were coated on the thin layer chromatography plate, and coupled with miniaturized fluorimeter for fluorescence detection of MG in fish samples. The resulting CdTe-MIP/SiO2 NPs based system possessed good linearity (0.01 ∼ 20 μmol/L), high recoveries (98.36 %∼101.45 %) and low detection limit (3.7 nmol/L) for MG. Furthermore, CdTe-MIP/SiO2 NPs based system were employed to measure fish samples spiked with MG, meanwhile, HPLC was utilized to evaluate the accuracy and reliability. And the paired t-test was conducted to evaluate differences between fluorescence method and HPLC, P > 0.05 means no significant difference was observed, the results demonstrated that both fluorescence method and HPLC are suitable for MG analysis.

Thorough Validation of Optimized Size Exclusion Chromatography-Total Organic Carbon Analysis for Natural Organic Matter in Fresh Waters

Size exclusion chromatography with total organic carbon detection (HPSEC-TOC) is a widely employed technique for characterizing aquatic natural organic matter (NOM) into high, medium, and low molecular weight fractions. This study validates the suitability of HPSEC-TOC for a simplified yet efficient routine analysis of freshwater and its application within drinking water treatment plants. The investigation highlights key procedural considerations for optimal results and shows the importance of sample preservation by refrigeration with a maximum storage duration of two weeks. Prior to analysis, the removal of inorganic carbon is essential, which is achieved without altering the NOM composition through sample acidification to pH 6 and subsequent N2-purging. The chromatographic separation employs a preparative TSK HW-50S column to achieve a limit of detection of 19.0 µgC dm-3 with an injection volume of 1350 mm-3. The method demonstrates linearity up to 10,000 µgC dm-3. Precision, trueness and recovery assessments are conducted using certified reference materials, model compounds, and real water samples. The relative measurement uncertainty in routine analysis ranges from 3.22% to 5.17%, while the measurement uncertainty on the bias is 8.73%. Overall, the HPSEC-TOC represents a reliable tool for NOM fractions analysis in both treated and untreated ground and surface water.

Identification of high oxygen-consuming substances in stormwater drainage systems illicitly connected with sewage system

The dissolved oxygen content in water is an important indicator for assessing the quality of the water environment, and maintaining a certain amount of dissolved oxygen is essential for the healthy development of the ecological environment. When a water body is anoxic, the activity of anaerobic microorganisms increases and organic matter is decomposed to produce a large number of blackening and odorizing substances, resulting in black and odorous water bodies, which is a very common and typical phenomenon in China. Presently, there is still a relatively universal occurrence of illicitly connected stormwater and sewage pipes in the urban drainage pipe network in China, which makes oxygen-consuming substances be directly discharged into rivers through stormwater pipes and consume the dissolved oxygen in the water bodies, resulting in an oxygen deficiency of the water. This induces seasonal or year-round black and stink phenomena in urban rivers. Hence, identifying high oxygen-consuming substances, which lays the foundation for the subsequent removal of oxygen-consuming substances, is essential. Through a series of comparisons of water quality indicators and analysis of organic characteristics, it was found that the oxygen consumption capacity of domestic sewage was higher than that of industrial wastewater in the selected area of this study, and the oxygen-consuming substances of domestic sewage were small molecular amino acids. By comparing 20 conventional free amino acids, it was found that seven of them consumed oxygen easily, and compared with chemical oxygen consumption, biological oxygen consumption was in a leading position.

Mechanistic insight into the role of typical microplastics in chlorination disinfection: Precursors and adsorbents of both MP-DOM and DBPs

Microplastics (MPs) in drinking water are predominantly < 10 µm. The leaching of MPs derived dissolved organic matters (MP-DOM) from 5 µm polypropylene MPs (PP-MPs) and polystyrene MPs (PS-MPs) and the formation of MP-DOM derived disinfection byproducts during chlorination disinfection were first investigated. Comparably, PS-MPs are more vulnerable to chlorination and the primary attacks are on para C in aromatic side-chains via electrophilic Cl-substitution and oxidation by two-electron transfer. The O/C and Cl/C ratio of polystyrene MPs was linear and exponential versus initial available Cl2 concentrations, respectively. The significant PS-DOM leaching was observed with initial available Cl2 of 4.0 mg/L (USEPA recommended upper dose). As the initial available Cl2 concentration increased to 8.0 mg/L, the adsorption of chloro-phenolic-components of 200 Daltons in PS-DOM by 5 µm PS-MPs was observed for the first time. Trichloromethane (TCM) was identified as the dominant disinfection byproduct with a formation potential of 60.3 ± 7.8 and 73.7 ± 9.8 μg/mg for PS-DOM and PP-DOM, respectively. The derived TCM could adsorb onto PS-MPs followed the pseudo-second-order kinetic and Langmuir isotherm models. Extreme chlorination could reduce the maximal adsorption capacity of TCM on 5 µm PS-MPs from 196.68 ± 48.66 to 146.02 ± 32.98 μg/g. Thus, PS-MPs act as precursors and carriers of TCM in chlorination.

Investigating the molecular weight distribution of atmospheric water-soluble brown carbon using high-performance size exclusion chromatography coupled with diode array and fluorescence detectors

Atmospheric brown carbon (BrC) contain amounts of organic species, but their molecular weight (MW) distributions is still poorly understood. This study applied high-performance size exclusion chromatography (HPSEC) coupled with a diode array detector (DAD) and fluorescence detector (FLD) to characterize the MW distributions of typical chromophores and fluorophores within water-soluble BrC. The investigation focused on the spring season, encompassing both typical urban and rural aerosols. Our results showed that chromophores (at 254 and 365 nm), and humic-like and protein-like fluorophores identified by excitation-emission matrix parallel factor analysis (EEM-PARAFAC) within BrC were broadly distributed along the MW continuum (∼50-20,000 Da). This suggests that BrC mainly comprises complex chromophores and fluorophores with heterogeneous molecular sizes. High-MW (HMW, >1 kDa) species (66%-74%) dominated the chromophores at 254 and 365 nm. However, the latter chromophores were enriched with more HMW species. This result suggested that the HMW chromophores might contribute more to BrC absorption at longer wavelengths. The PARAFAC-derived fluorescent components also exhibited different MW distributions. Three humic-like substances (HULIS) were all dominated by HMW fractions (51%-74%), but protein-like fluorescent component (PLOM) enriched low-MW (LMW, <1 kDa) species (60%-66%). Furthermore, the molecular size (i.e., weight-averaged and number-averaged MW) and the ratios between HMW and LMW species decreased in the order highly-oxygenated HULIS > less-oxygenated HULIS > PLOM, indicating that the fluorophores with longer Em were generally related to larger MW. To our knowledge, this is the first report on the molecular size of individual fluorescent components within aerosol BrC. The results obtained here enhanced our knowledge of heterogeneous composition, complex physicochemical properties, and potential atmospheric fates of aerosol BrC.

Interpreting pH-Dependent Differential UV/VIS Absorbance Spectra to Characterize Carboxylic and Phenolic Chromophores in Natural Organic Matter

Natural organic matter (NOM) is critical for the biogeochemical cycles of energy and many elements in terrestrial and aquatic ecosystems, and protonation-active functional groups in NOM molecules, notably carboxylic and phenolic groups often mediate these critical environmental functions. Molecular heterogeneity, polydispersity and dynamic behavior of NOM complicate achieving an unambiguous description of its molecular properties and reactivity. This study demonstrates that differential ultraviolet-visible (UV/VIS) absorbance spectra (DAS) of NOM acquired at varying pH values exhibit several distinct features associated with the deprotonation of NOM molecules, independent of the environmental provenance of NOM (e.g., surface water, seawater, sediment, and wastewater). The protonation-active functionalities that contribute to the Gaussian distribution bands present in the DAS were identified here by comparing characteristic properties of the bands with the stoichiometries of NOM molecules ascertained by Ultrahigh-Resolution Fourier-Transform Ion Cyclotron Resonance Mass Spectrometry (FT-ICR-MS). The protonation-active individual chromophores universally present in NOM molecules were identified by a genetic molecular network analysis. The observed DAS features were closely modeled via superimposing DAS spectra of 51 individual protonation-active chromophores. Molecular orbital theory was applied to further interpret the deprotonation of these chromophores, their molecular structure, electron distribution, and electron transitions measured using DAS. The high sensitivity and easy implementation of the DAS approach allows using it as a powerful tool to quantify the molecular properties and reactivity of NOM at environmental concentrations.

Formation of Nano- and Microplastics and Dissolved Chemicals During Photodegradation of Polyester Base Fabrics with Polyurethane Coating

Polyurethane (PU) synthetic leathers possess an intricate plastic composition, including polyester (PET) base fabrics and upper PU resin, but the release of fragments from the complexes is unclear. Therefore, we investigated the photodegradation trends of PET base fabrics with PU coating (PET-U) as a representative of composite plastics. Attention was paid to the comparison of the photoaging process of PET-U with that of pure PET base fabric (PET-P). To reveal the potential for chain scission, physical and chemical changes (e.g., surface morphology, molecular weight, and crystallinity) of the two fabrics were explored. The generation of microplastic fibers (MPFs) and microplastic particles (MPPs) was distinguished. Compared with PET-P, PET-U showed a similar but delayed trend in various characteristics and debris release rate as the photoaging time prolonged. Even so, after 360 h of illumination, the generated number of MPs (including MPFs and MPPs) rose considerably to 9.32 × 10⁷ MPs/g, and the amount of released nanoplastics (NPs) increased to 2.70 × 10¹¹ NPs/g from PET-U. The suppression of MP formation from PET-U was potentially directed by the physical shielding of the upper PU layer and the dropped MPs, which resisted the photochemical radical effect. The components of dissolved organic matter derived from plastics (P-DOM) were separated by molecular weight using a size-exclusion chromatography-diode array detector-organic carbon detector/organic nitrogen detector (SEC-DAD-OCD/OND), and the results showed that a larger amount of carbon- and nitrogen-containing chemical substances were generated in PET-U, accompanied by more aromatic and fluorescent compounds. The results provided theoretical bases and insights for future research on the risks of plastic debris from PU synthetic leathers on aquatic organisms and indicated feasible directions for exploring combined pollution studies of plastics.

Enhanced coagulation and oxidation by the Mn(VII)-Fe(III)/peroxymonosulfate process: Performance and mechanisms

To improve the performance of the conventional coagulation process, a permanganate (Mn(VII)) pre-oxidation combined with Fe(III)/peroxymonosulfate (PMS) coagulation process (Mn(VII)-Fe(III)/PMS) that can significantly improve the removal of dissolved organic carbon (DOC), turbidity, and micropollutants is proposed in this study. Compared with conventional Fe(III) coagulation, the Mn(VII)-Fe(III)/PMS process can also significantly enhance the removal of iohexol and sulfamethoxazole in raw water. During this process, the primary reduction product, Mn(IV), after Mn(VII) pre-oxidation was adsorbed on the floc surfaces and involved in the Fe(III)/PMS process. The natural organic matter (NOM) in raw water mediated the redox cycle of iron. The synergistic effect of NOM, Fe, and Mn facilitated the redox cycle of Mn(III)/Mn(IV) and Fe(III)/Fe(II) to promote the activation of PMS. The sulfate radical (SO₄^•-) played an important role in the degradation of micropollutants. The formation potential of the detected volatile disinfection by-product (DBP) during the subsequent chlorination was reduced by 21.9% after the Mn(VII)-Fe(III)/PMS process. This study demonstrated the promising application of the Mn(VII)-Fe(III)/PMS process for coagulation and micropollutant control and illustrated the reaction mechanism. This study provides guidance for improving conventional drinking water treatment processes.

Novel insights into formation mechanism of organic chloramines from pre-oxidized algae-laden water: Multiple roles of dissolved organic nitrogen

Organic chloramines posed significant risks to drinking water safety. However, the formation mechanism of algae-derived organic chloramines remained unclear. In this study, it was observed that pre-oxidation of algal suspensions increased organic chloramine formation during chlorination. Compared to KMnO₄ pre-oxidation, O₃ significantly increased the organic chloramine formation potential of algal suspensions. Characterization was performed with size exclusion chromatography-multiple detectors (SEC-MDs) to better understand the organic chloramine formation mechanism. The results revealed that low molecular weight proteins (AMW ≤ 0.64 kDa) were the main precursors of organic chloramines after conventional water treatment processes. We then focused on 14 essential amino acids involved in protein formation. Their concentrations and organic chloramine formation potentials were determined, based on which the theoretical organic chloramine formation potentials of the studied samples were evaluated. However, dramatic gaps between theoretical and experimental organic chloramine formations were observed, which suggested that not all organic nitrogen could react with chlorine to form organic chloramine. The condensed dual descriptor (CDD) was calculated to predict the electrophilic substitution reaction sites on peptides. Furthermore, the activation barrier of each proposed reaction was computed to confirm that the reaction sites for chlorine were located on amino groups. This study clarified the formation mechanism of algal-derived organic chloramines, which could provide a powerful theoretical foundation for controlling organic chloramine formation in drinking water processes.