Antibacterial action of a novel functionalized chitosan-arginine against Gram-negative bacteria

An antibacterial, multifunctional nanogel for efficient treatment of neutrophilic asthma

Asthma is a chronic and heterogeneous disease affecting the lungs and respiratory tract. In particular, the neutrophil subtype of asthma was described as persistent, more severe, and corticosteroid-resistant. Growing evidence suggested that nontypeable Haemophilus influenzae (NTHi) infection contributes to the development of neutrophilic asthma, exacerbating clinical symptoms and increasing the associated medical burden. In this work, arginine-grafted chitosan (CS-Arg) was ionically cross-linked with tris(2-carboxyethyl) phosphine (TCEP), and a highly-efficient antimicrobial agent, poly-ε-L-Lysine (ε-PLL), was incorporated to prepare ε-PLL/CS-Arg/TCEP (ECAT) composite nanogels. The results showed that ECAT nanogels exhibited highly effective inhibition against the proliferation of NTHi, Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). In addition, ECAT nanogels could effectively inhibit the formation of mucins aggregates in vitro, suggesting that the nanogel might have the potential to destroy mucin in respiratory disease. Furthermore, in the ovalbumin (OVA)/NTHi-induced Balb/c mice model of neutrophilic asthma, the number of neutrophils in the alveolar lavage fluid and the percentage of inflammatory cells in the blood were effectively reduced by exposure to tower nebulized administration of ECAT nanogels, and reversing airway hyperresponsiveness (AHR) and reducing inflammation in neutrophilic asthma mice. In conclusion, the construction of ECAT nanogels was a feasible anti-infective and anti-inflammatory therapeutic strategy, which demonstrated strong potential in the clinical treatment of neutrophilic asthma.

Fabrication of chitosan-based fluorescent hydrogel membranes cross-linked with bisbenzaldehyde for efficient selective detection and adsorption of Fe2

Chitosan, as a natural biomass material, is green, recyclable, sustainable and well biocompatible. The molecular chain is rich in active groups such as amino and hydroxyl groups, and its preparation of fluorescent probes has the advantages of biocompatibility and efficient detection performance. In this study, a bis(benzaldehyde) (BHD) fluorescent functional molecule was designed. Then a series of fluorescent chitosan-based hydrogel films (CSBHD) were prepared using chitosan as raw material and BHD as cross-linking agent. As a fluorescent probe for metal ions, CSBHD was able to efficiently detect Fe2+ with a linear correlation of fluorescence intensity in the range of 0-160 μM, and the limit of detection (LOD) was 0.55 μM. Moreover, it has excellent adsorption performance for Fe2+ ions, with a maximum adsorption capacity of 223.5 g/mg at 500 mg/L Fe2+ concentration. Finally, we characterised the structure and microscopic morphology of CSBHD films and found that CSBHD as a hydrogel film has a high cross-linking density, good water resistance, excellent thermal stability, strong resistance to swelling, and excellent stability in cycling tests. Hence, it has great potential for application in adsorption and detection of Fe2+ ions. It also provides a good strategy for the application of chitosan based fluorescent probe materials in environmental monitoring and heavy metal ion adsorption.

Evaluation of the restorative effect of ozone and chitosan-hyaluronic acid with and without mesenchymal stem cells on wound healing in rats

This study evaluated the effect of ozone, chitosan-hyaluronic (Cs-HA) acid and mesenchymal stem cells (MSCs) on wound healing in rats. A total of 64 rats were randomly divided into four groups: control, ozone, Cs-HA + ozone and Cs-HA + ozone + MSCs. A 5 mm full-thickness wound was created on the back of each rat. The wound area was measured macroscopically on days 3, 5, 9 and 14. Tissue sections were prepared for histopathological evaluation of inflammation, collagen arrangement, neovascularization and epithelial tissue rearrangement. Macroscopic assessment showed differences in wound area on days 5, 9 and 14. Histopathological examination showed that the Cs-HA + ozone + MSCs and Cs-HA + ozone groups had significantly higher vascularization on day 3 compared to the ozone-treated and control groups. All treatment groups had significantly better collagen arrangement than the control group. On day 5, no significant difference was observed between different groups. On day 9, the inflammation level in the Cs-HA + ozone + MSCs group was significantly lower than in the other groups. All treatment groups had significantly better vascularization compared to the control group. On day 14, the rate of inflammation was significantly lower in the treatment groups than in the control group. Significantly higher collagen arrangement levels were observed in the Cs-HA + ozone and Cs-HA + ozone + MSCs groups compared to the control and ozone groups. All treatment groups had significantly better epithelial tissue rearrangement than the control group. Overall, the results of this study indicated that treatment with ozone, Cs-HA acid, Cs-HA and MSCs accelerated wound healing in rats. The effect of using Cs-HA acid with mesenchymal cells was better than the other types of treatment. Larger clinical trials are needed to assess these factors for improving chronic wound treatment.

Curcumin-loaded mesoporous polydopamine nanoparticles modified by quaternized chitosan against bacterial infection through synergistic effect

Clinically, open wounds caused by accidental trauma and surgical lesion resection are easily infected by external bacteria, hindering wound healing. Antibacterial photodynamic therapy has become a promising treatment strategy for wound infection. In this study, a novel antibacterial nanocomposite material (QMC NPs) was synthesized by curcumin, quaternized chitosan and mesoporous polydopamine nanoparticles. The results showed that 150 μg/mL QMC NPs had good biocompatibility and exerted excellent antibacterial activity against Staphylococcus aureus and Escherichia coli after blue laser irradiation (450 nm, 1 W/cm2). In vivo, QMC NPs effectively treated bacterial infection and accelerated the healing of infected wounds in mice.

Nanostructured Medical Devices: Regulatory Perspective and Current Applications

Nanomaterials (NMs) are having a huge impact in several domains, including the fabrication of medical devices (MDs). Hence, nanostructured MDs are becoming quite common; nevertheless, the associated risks must be carefully considered in order to demonstrate safety prior to their immission on the market. The biological effect of NMs requires the consideration of methodological issues since already established methods for, e.g., cytotoxicity can be subject to a loss of accuracy in the presence of certain NMs. The need for oversight of MDs containing NMs is reflected by the European Regulation 2017/745 on MDs, which states that MDs incorporating or consisting of NMs are in class III, at highest risk, unless the NM is encapsulated or bound in such a manner that the potential for its internal exposure is low or negligible (Rule 19). This study addresses the role of NMs in medical devices, highlighting the current applications and considering the regulatory requirements of such products.

Exploring the emulsification potential of chitosan modified with phenolic acids: Emulsifying properties, functional activities, and application in curcumin encapsulation

This study successfully grafted caffeic acid and 3,4-dihydroxybenzoic acid into chitosan through a coupling reaction, yielding grafting ratio of 8.93 % for caffeic acid grafted chitosan (CA-GC) and 9.15 % for 3,4-dihydroxybenzoic acid grafted chitosan (DHB-GC) at an optimal concentration of 4 mmol phenolic acids. The characterization of modified chitosans through ultraviolet visible spectrometer (UV-vis), Fourier transform infrared spectrometer (FTIR), proton nuclear magnetic resonance (1H NMR), and x-ray photoelectron spectrometer (XPS) confirmed the successful grafting of phenolic acids. In the subsequent step of emulsion preparation, confocal laser scanning microscope images confirmed the formation of O/W (oil-in-water) emulsions. The phenolic acid-grafted chitosans exhibited better emulsification properties compared to native chitosan, such as reduced droplet size, more uniform emulsion droplet distribution, increased ζ-potential, and enhanced emulsifying activity and stability. Moreover, the modified chitosans demonstrated increased antioxidant activities (evidenced by DPPH and β-carotene assays) and displayed greater antimicrobial effects against E. coli and S. aureus. Its efficacy in curcumin encapsulation was also notable, with improved encapsulation efficiency, sustained release rates, and enhanced storage and photostability. These findings hint at the potential of modified chitosans as an effective emulsifier.

Biofabrication of engineered blood vessels for biomedical applications

To successfully engineer large-sized tissues, establishing vascular structures is essential for providing oxygen, nutrients, growth factors and cells to prevent necrosis at the core of the tissue. The diameter scale of the biofabricated vasculatures should range from 100 to 1,000 µm to support the mm-size tissue while being controllably aligned and spaced within the diffusion limit of oxygen. In this review, insights regarding biofabrication considerations and techniques for engineered blood vessels will be presented. Initially, polymers of natural and synthetic origins can be selected, modified, and combined with each other to support maturation of vascular tissue while also being biocompatible. After they are shaped into scaffold structures by different fabrication techniques, surface properties such as physical topography, stiffness, and surface chemistry play a major role in the endothelialization process after transplantation. Furthermore, biological cues such as growth factors (GFs) and endothelial cells (ECs) can be incorporated into the fabricated structures. As variously reported, fabrication techniques, especially 3D printing by extrusion and 3D printing by photopolymerization, allow the construction of vessels at a high resolution with diameters in the desired range. Strategies to fabricate of stable tubular structures with defined channels will also be discussed. This paper provides an overview of the many advances in blood vessel engineering and combinations of different fabrication techniques up to the present time.

Optimizing magnetic, dielectric, and antimicrobial performance in chitosan-PEG-Fe2O3@NiO nanomagnetic composites

There is a growing interest in eco-friendly and cost-effective organic-inorganic nanocomposites due to their alignment with the principles of "green" chemistry, as well as their biocompatibility and non-toxicity. This study focused on producing Chitosan-PEG-Fe2O3@NiO nanomagnetic composites to improve the stability, dielectric properties, and antimicrobial effectiveness of these nanocomposite materials. The process involved synthesizing Fe2O3@NiO via sol-gel and polymerizing chitosan-PEG. The nanocomposites were characterized by XRD, TEM, FTIR, optical, dielectric, and VSM. Incorporating Fe2O3@NiO significantly improved stability, and the interaction with Fe2O3 during the sol-gel process facilitated the formation of NiFe2O4 with an increase in the crystallinity within the chitosan-PEG matrix. The study examined optical and dielectric properties, highlighting that the 3 NiO-doped chitosan-PEG-Fe2O3 composites had high electrical conductivity (1.8 ∗ 10-3 S/cm) and a significant dielectric constant (106 at low frequencies). As the ratio of NiO NPs within the chitosan-PEG-Fe2O3 increases, the energy band gap of chitosan-PEG-Fe2O3 films decreases up to 3.7 eV. This decrease is owing to the quantum confinement effect. These composites also demonstrated improved antimicrobial activity against E. coli and S. aureus and higher activity in the presence of nanomagnetic particles. The minimum inhibitory concentrations of CS-PEG-Fe2O3/NiO NPs against (Bacillus cereus, M. luteus, S. aureus and (S. enterica, H. pylori, E. coli) were (22-35 mm) and (21-34 mm), respectively.

Review on chitosan-based antibacterial hydrogels: Preparation, mechanisms, and applications

Chitosan (CS) is known for its remarkable properties, such as good biocompatibility, biodegradability, and renewability, in addition to its antibacterial and biological activities. However, as CS is insoluble in water, it displays limited antibacterial performance under neutral and physiological conditions. A viable solution to this problem is grafting chemically modified groups onto the CS framework, thereby increasing its solubility and enhancing its antibacterial effect. Herein, the antibacterial action mechanism of CS and its derivatives is reviewed, confirming the prevalent use of composite materials comprising CS and its derivatives as an antibacterial agent. Generally, the antimicrobial ability of CS-based biomaterials can be enhanced by incorporating supplementary polymers and antimicrobial agents. Research on CS-based composite biomaterials is ongoing and numerous types of biomaterials have been reported, including inorganic nanoparticles, antibacterial agents, and CS derivatives. The development of these composite materials has considerably expanded the application of CS-based antibacterial materials. This study reviews the latest progress in research regarding CS-based composite hydrogels for wound repair, tissue engineering, drug release, water purification, and three-dimensional printing applications. Finally, the summary and future outlook of CS-based antibacterial hydrogels are presented in anticipation of a broader range of applications of CS-based antibacterial hydrogels.

Synthesis and characterization of novel chitosan derivatives (containing dipyridinium quaternary salts) with antimicrobial potential

Chitosan derivatives are versatile materials, biocompatible and biodegradable, that can be tailor-made to suit specific biomedical applications. In this study, two N-heterocyclic salts (N,N'-diphenacyl-[4,4'-dipyridinium] dibromide (DP) and N,N'-diphenacyl-1,2-bis-(4-pyridinium)ethane dibromide (DPE)) were used for chitosan functionalization to enhance its antimicrobial potential. Physico-chemical characterization of the newly synthesized derivatives (Ch-DP and Ch-DPE) was performed by elemental analysis, spectrometry (UV-Vis, FTIR), electrochemistry (OCP, CV), and electron microscopy (SEM) proving that the highest degree of functionalization was obtained for Ch-DP. The antimicrobial effect of chitosan functionalization was further tested in terms of its interaction with Listeria monocytogenes Scott A, and Staphylococcus aureus ATCC 25923, as Gram-positive bacteria and Escherichia coli ATCC 25922, as Gram-negative bacterium, respectively, showing that the Ch-DP had a good inhibitory activity compared with Ch-DPE.

The antihelminth drug rafoxanide reverses chromosomal-mediated colistin-resistance in Klebsiella pneumoniae

The emergence and rapid spread of multi-drug-resistant (MDR) bacteria pose a serious threat to global healthcare. Although the synergistic effect of rafoxanide and colistin was reported, little is known regarding the potential mechanism of this synergy, particularly against chromosomal-mediated colistin-resistant Klebsiella pneumoniae. In the present study, we elucidated the synergistic effect of rafoxanide and colistin against chromosomal-mediated colistin-resistant Klebsiella pneumoniae isolates from human (KP-9) and swine (KP-1) infections. Treatment with 1 mg/L rafoxanide overtly reversed the MIC max to 512-fold. Time-kill assays indicated that rafoxanide acted synergistically with colistin against the growth of KP-1 and KP-9. Mechanistically, we unexpectedly found that the combination destroys the inner-membrane integrity, and ATP synthesis was also quenched, albeit, not via F1F0-ATPase; thereby also inhibiting the activity of efflux pumps. Excessive production of reactive oxygen species (ROS) was also an underlying factor contributing to the bacterial-killing effect of the combination. Transcriptomic analysis unraveled overt heterogeneous expression as treated with both administrations compared with monotherapy. Functional analysis of these differentially expressed genes (DEGs) targeted to the plasma membrane and ATP-binding corroborated phenotypic screening results. These novel findings highlight the synergistic mechanism of rafoxanide in combination with colistin which effectively eradicates chromosomal-mediated colistin-resistant Klebsiella pneumoniae. IMPORTANCE The antimicrobial resistance of Klebsiella pneumoniae caused by the abuse of colistin has increased the difficulty of clinical treatment. A promising combination (i.e., rafoxanide+ colistin) has successfully rescued the antibacterial effect of colistin. However, we still failed to know the potential effect of this combination on chromosome-mediated Klebsiella pneumoniae. Through a series of in vitro experiments, as well as transcriptomic profiling, we confirmed that the MIC of colistin was reduced by rafoxanide by destroying the inner-membrane integrity, quenching ATP synthesis, inhibiting the activity of the efflux pump, and increasing the production of reactive oxygen species. In turn, the expression of relevant colistin resistance genes was down-regulated. Collectively, our study revealed rafoxanide as a promising colistin adjuvant against chromosome-mediated Klebsiella pneumoniae.

Chitosan Hydrogels Crosslinked with Oxidized Sucrose for Antimicrobial Applications

Oxidized sucrose (OS) reacts with amino-group-containing polysaccharides, including chitosan, without catalyst, resulting in hydrogels entirely composed of carbohydrates. The presence of imine bonds with low structural stabilities and unreacted aldehydes in the structures of these hydrogels hinder their application as biomaterials. Therefore, herein, the chitosan hydrogels (CTSGs) obtained after the crosslinking of chitosan with OS were reduced using sodium borohydride to convert imine bonds to secondary amines and aldehydes to alcohols. The structures of CTSGs were comprehensively characterized using Fourier transform infrared and 13C nuclear magnetic resonance spectroscopies, and the results implied that the degree of crosslinking (CR) depended on the OS feed amount used during CTSG preparation. The properties of CTSGs were significantly dependent on CR; with an increase in CR, the thermal stabilities and dynamic moduli of CTSGs increased, whereas their swelling properties decreased. CTSGs exhibited antimicrobial properties against the gram-negative bacterium Escherichia coli, and their performances were also dependent on CR. The results indicated the potentials of CTSGs completely based on carbohydrates as antimicrobial hydrogels for various medical and pharmaceutical applications. We believe that this study will contribute to the development of hydrogels for application in the food, medical, and pharmaceutical fields.

Multifunctional Textiles with Flame Retardant and Antibacterial Properties: A Review

It is well known that bacterial infections and fire-hazards are potentially injurious in daily life. With the increased security awareness of life and properties as well as the improvement of living standards, there has been an increasing demand for multifunctional textiles with flame retardant and antibacterial properties, especially in the fields of home furnishing and medical protection. So far, various treatment methods, including the spray method, the dip-coating method, and the pad-dry-cure method, have been used to apply functional finishing agents onto fabrics to achieve the functionalization in the past exploration stage. Moreover, in addition to the traditional finishing technology, a number of novel technologies have emerged, such as layer-by-layer (LBL) deposition, the sol-gel process, and chemical grafting modification. In addition, some natural biomasses, including chitin, chitosan (CS), and several synthetic functional compounds that possess both flame-retardant and bacteriostatic properties, have also received extensive attention. Hence, this review focuses on introducing some commonly used finishing technologies and flame retardant/antibacterial agents. At the same time, the advantages and disadvantages of different methods and materials were summarized, which will contribute to future research and promote the development and progress of the industry.

The Properties of Linezolid, Rifampicin, and Vancomycin, as Well as the Mechanism of Action of Pentamidine, Determine Their Synergy against Gram-Negative Bacteria

Combining pentamidine with Gram-positive-targeting antibiotics has been proven to be a promising strategy for treating infections from Gram-negative bacteria (GNB). However, which antibiotics pentamidine can and cannot synergize with and the reasons for the differences are unclear. This study aimed to identify the possible mechanisms for the differences in the synergy of pentamidine with rifampicin, linezolid, tetracycline, erythromycin, and vancomycin against GNB. Checkerboard assays were used to detect the synergy of pentamidine and the different antibiotics. To determine the mechanism of pentamidine, fluorescent labeling assays were used to measure membrane permeability, membrane potential, efflux pump activity, and reactive oxygen species (ROS); the LPS neutralization assay was used to evaluate the target site; and quantitative PCR was used to measure changes in efflux pump gene expression. Our results revealed that pentamidine strongly synergized with rifampicin, linezolid, and tetracycline and moderately synergized with erythromycin, but did not synergize with vancomycin against E. coli, K. pneumoniae, E. cloacae, and A. baumannii. Pentamidine increased the outer membrane permeability but did not demolish the outer and inner membranes, which exclusively permits the passage of hydrophobic, small-molecule antibiotics while hindering the entry of hydrophilic, large-molecule vancomycin. It dissipated the membrane proton motive force and inactivated the efflux pump, allowing the intracellular accumulation of antimicrobials that function as substrates of the efflux pump, such as linezolid. These processes resulted in metabolic perturbation and ROS production which ultimately was able to destroy the bacteria. These mechanisms of action of pentamidine on GNB indicate that it is prone to potentiating hydrophobic, small-molecule antibiotics, such as rifampicin, linezolid, and tetracycline, but not hydrophilic, large-molecule antibiotics like vancomycin against GNB. Collectively, our results highlight the importance of the physicochemical properties of antibiotics and the specific mechanisms of action of pentamidine for the synergy of pentamidine-antibiotic combinations. Pentamidine engages in various pathways in its interactions with GNB, but these mechanisms determine its specific synergistic effects with certain antibiotics against GNB. Pentamidine is a promising adjuvant, and we can optimize drug compatibility by considering its functional mechanisms.

Recent Progress and Trends in the Development of Electrospun and 3D Printed Polymeric-Based Materials to Overcome Antimicrobial Resistance (AMR)

Antimicrobial resistance (AMR) developed by microorganisms is considered one of the most critical public health issues worldwide. This problem is affecting the lives of millions of people and needs to be addressed promptly. Mainly, antibiotics are the substances that contribute to AMR in various strains of bacteria and other microorganisms, leading to infectious diseases that cannot be effectively treated. To avoid the use of antibiotics and similar drugs, several approaches have gained attention in the fields of materials science and engineering as well as pharmaceutics over the past five years. Our focus lies on the design and manufacture of polymeric-based materials capable of incorporating antimicrobial agents excluding the aforementioned substances. In this sense, two of the emerging techniques for materials fabrication, namely, electrospinning and 3D printing, have gained significant attraction. In this article, we provide a summary of the most important findings that contribute to the development of antimicrobial systems using these technologies to incorporate various types of nanomaterials, organic molecules, or natural compounds with the required property. Furthermore, we discuss and consider the challenges that lie ahead in this research field for the coming years.

Current and emerging applications of saccharide-modified chitosan: a critical review

Chitin, as the main component of the exoskeleton of Arthropoda, is a highly available natural polymer that can be processed into various value-added products. Its most important derivative, i.e., chitosan, comprising β-1,4-linked 2-amino-2-deoxy-β-d-glucose (deacetylated d-glucosamine) and N-acetyl-d-glucosamine units, can be prepared via alkaline deacetylation process. Chitosan has been used as a biodegradable, biocompatible, non-antigenic, and nontoxic polymer in some in-vitro applications, but the recently found potentials of chitosan for in-vivo applications based on its biological activities, especially antimicrobial, antioxidant, and anticancer activities, have upgraded the chitosan roles in biomaterials. Chitosan approval, generally recognized as a safe compound by the United States Food and Drug Administration, has attracted much attention toward its possible applications in diverse fields, especially biomedicine and agriculture. Even with some favorable characteristics, the chitosan's structure should be customized for advanced applications, especially due to its drawbacks, such as low drug-load capacity, low solubility, high viscosity, lack of elastic properties, and pH sensitivity. In this context, derivatization with relatively inexpensive and highly available mono- and di-saccharides to soluble branched chitosan has been considered a "game changer". This review critically reviews the emerging technologies based on the synthesis and application of lactose- and galactose-modified chitosan as two important chitosan derivatives. Some characteristics of chitosan derivatives and biological activities have been detailed first to understand the value of these natural polymers. Second, the saccharide modification of chitosan has been discussed briefly. Finally, the applications of lactose- and galactose-modified chitosan have been scrutinized and compared to native chitosan to provide an insight into the current state-of-the research for stimulating new ideas with the potential of filling research gaps.

Characterization of heat-treated chitosan cast films and their antimicrobial activity on the growth of natural flora of pasteurized milk

This research aimed to evaluate the physicochemical and biocidal properties of chitosan films obtained through the solvent casting method using two different molecular weights, and thermally treated for an extended time (3 weeks) at 70 °C under vacuum condition (RH 0 %). The effect of storage time (for 30 and 180 days) under ambient conditions (23 °C and RH 40 %) on the properties of heat-treated cast films and their biocidal effectiveness was also assessed. FTIR-ATR, TGA and XRD of resulting films were analyzed to explore the dependency of antibacterial performance on the alteration in molecular and chemical structure. The results demonstrated that the solubility of treated films at 70 °C was proportionally reduced, resulting from the reduction of protonated amines and an increase in crystallinity. Likewise, increasing storage time led to a significant lowering in the solubilization of cast films. It was found that the solubilized fraction of chitosan cast films is the active fraction with the biocide behavior that can act against bacteria. In addition, the effectiveness of migrated chitosan was examined against the natural flora of pasteurized milk, such as Paenibacillus and Pseudomonas fluorescens. The results showed that cast films obtained from chitosan with lower molecular weight caused a reduction in the total count of viable cells without a significant effect on the properties of milk.

Preparation and characterization of PVA/arginine chitosan/ZnO NPs composite films

In this study, arginineated chitosan (ACS) was used as a soft brain membrane and chelating agent to synthesize ACS-ZnO NPs, and then ACS and ACS-ZnO NPs were added to a polyvinyl alcohol (PVA) matrix as an antimicrobial agent to form films by casting. The formation and structural morphology of ACS and ACS-ZnO NPs were investigated by applying FTIR, ¹H NMR, XRD, EDS, SEM, and TEM techniques, and ACS has shown better water solubility. The cytotoxicity experiments of ACS and ACS-ZnO NPs on A549 cells showed that both had good cytocompatibility. The incorporation of ACS and ACS-ZnO NPs improves the composite film's mechanical properties, water barrier, and oxygen barrier and exhibits excellent antibacterial activities against S. aureus and E. coli. More importantly, in addition to extending the shelf life of cherry tomatoes, the composite film is also biodegradable to some degree. Therefore, polyvinyl alcohol films based on ACS and ACS-ZnO NPs added as antimicrobial agents have great potential for food packaging applications.

Recent advances in green synthesized nanoparticles for bactericidal and wound healing applications

Nanotechnology has become an exciting area of research in diverse fields, such as: healthcare, food, agriculture, cosmetics, paints, lubricants, fuel additives and other fields. This review is a novel effort to update the practioneers about the most current developments in the widespread use of green synthesized nanoparticles in medicine. Biosynthesis is widely preferred among different modes of nanoparticle synthesis since they do not require toxic chemical usage and they are environment-friendly. In the green bioprocess, plant, algal, fungal and cyanobacterial extract solutions have been utilized as nucleation/capping agents to develop effective nanomaterials for advanced medical applications. Several metal salts, such as silver, zinc, titanium and other inorganic salts, were utilized to fabricate innovative nanoparticles for healthcare applications. Irrespective of the type of wound, infection in the wound area is a widespread problem. Micro-organisms, the prime reason for wound complications, are gradually gaining resistance against the commonly used antimicrobial drugs. This necessitates the need to generate nanoparticles with efficient antimicrobial potential to keep the pathogenic microbes under control. These nanoparticles can be topically applied as an ointment and also be used by incorporating them into hydrogels, sponges or electrospun nanofibers. The main aim of this review is to highlight the recent advances in the Ag, ZnO and TiO₂ nanoparticles with possible wound healing applications, coupled with the bactericidal ability of a green synthesis process.

Soluble chitosan derivative treats wound infections and promotes wound healing in a novel MRSA-infected porcine partial-thickness burn wound model

Burns are physically debilitating and potentially fatal injuries. The most common etiology of burn wound infections in the US is methicillin-resistant Staphylococcus aureus (MRSA), which is particularly recalcitrant when biofilms form. The current standard of care, silver sulfadiazine (SSD) is effective in reducing bacterial load, but less effective in improving burn wound healing. New treatments that can manage infection while simultaneously improving healing would provide a benefit in the treatment of burns. Porcine models are frequently used as a model for human wound healing but can be expensive due to the need to separate wounds to avoid cross contamination. The porcine model developed in this study offers the capability to study multiple partial thickness burn wound (PTBW) sites on a single animal with minimal crosstalk to study wound healing, infection, and inflammation. The current study evaluates a wound rinse and a wound gel formulated with a non-toxic, polycationic chitosan derivative that is hypothesized to manage infection while also promoting healing, providing a potential alternate to SSD. Studies in vitro and in this PTBW porcine model compare treatment with the chitosan derivative formulations to SSD. The wound rinse and wound gel are observed to disrupt mature MRSA biofilms in vitro and reduce the MRSA load in vivo when compared to that of the standard of care. In vivo data further show increased re-epithelialization and faster healing in burns treated with wound rinse/gel as compared to SSD. Taken together, the data demonstrate the potential of the wound rinse/gel to significantly enhance healing, promote re-epithelialization, and reduce bacterial burden in infected PTBW using an economical porcine model.

Enhancement of Antimicrobial and Dyeing Properties of Cellulosic Fabrics via Chitosan Nanoparticles

The primary goal of this study is to prepare chitosan nanoparticles (CSNPs) by the ionic gelation method via the treatment of chitosan (0.2 wt.%) with tripolyphosphate (0.2 wt.%) ultrasonically for 45 min. FT-IR spectroscopy and TEM images were used to characterize and validate CSNP production. Cellulosic materials with different concentrations of CSNPs have better antibacterial and colouring characteristics. The treated cellulosic fabrics were analyzed by FT-IR spectroscopy, SEM, and thermogravimetric analysis. Colourimetric data measurements expressed in K/S values were used to evaluate the impact of CSNPs on the dyeing affinity of cellulosic materials. In addition, antibacterial activity against bacteria and fungi was tested on the treated cellulosic fabrics. According to the K/S values, cellulosic textiles treated with CSNPs (0.3 wt.%) had a better affinity for acid dyeing. These textiles also offer better antibacterial properties and are more resistant to washing, light, and rubbing. A cytotoxicity study found that CSNPs give cellulosic materials antibacterial and acid dyeing properties, which is good for the environment.

Mucoadhesive, Antibacterial, and Reductive Nanogels as a Mucolytic Agent for Efficient Nebulized Therapy to Combat Allergic Asthma

Asthma is an intractable disease involving the infiltration of inflammatory cells and mucus plugging. Despite small molecular mucolytics having the ability to break the disulfide bonds of mucins, offering a potential way to overcome the airflow obstruction and airway infection, these mucolytics have limited therapeutic effects in vivo. Therefore, in this work, arginine-grafted chitosan (CS-Arg) is ionically cross-linked with tris(2-carboxyethyl)phosphine (TCEP) to obtain nanogels as a mucolytic agent. The positively charged nanogels effectively inhibit the formation of large aggregates of mucin in vitro, probably thanks to the formation of an ionic interaction between CS-Arg and mucin, as well as the breakage of disulfide bonds in mucin by the reductive TCEP. Moreover, the nanogels show good cytocompatibility at concentrations up to 5 mg mL^-1, exhibiting effective inhibitory effects against the proliferation of both Staphylococcus aureus and Escherichia coli at 5 mg mL^-1. After the administration of the nanogels by nebulization into a Balb/c mouse model with allergic asthma, they can efficiently reduce the mucus obstruction in bronchioles and alveoli and relieve airway inflammation. Therefore, these CS-Arg/TCEP nanogels potentially represent a promising mucolytic agent for the efficient treatment of allergic asthma and other muco-obstructive diseases.

Multi-Target Antibacterial Mechanism of Moringin From Moringa oleifera Seeds Against Listeria monocytogenes

Moringin [4-(α-L-rhamnosyloxy) benzyl isothiocyanate] is an isothiocyanate from Moringa oleifera seeds. It is the bioactivated form of the glucosinolate precursor glucomoringin with various health benefits. However, few studies have examined the antibacterial activity of moringin. This study aimed to investigate the antimicrobial activity and mechanism of moringin against Listeria monocytogenes. The minimum inhibitory concentration (MIC), and growth curves were used to evaluate the bacteriostatic effect of moringin against L. monocytogenes. Transcriptome analysis by RNA sequencing was performed to elucidate the underlying mechanism of moringin against L. monocytogenes. The transcriptome results were validated. The results showed that moringin inhibited the growth of L. monocytogenes with a MIC of 400 μM. RNA sequencing results showed that the differences in the expression of genes related to the cell wall and membrane biosynthesis, phosphotransferase system (PTS), oxidative stress, energy metabolism, and DNA binding were significantly affected. As with the transcriptome results, the results of the mechanism verification found that moringin damaged the integrity of the cell wall and cell membrane, stimulated oxidative stress, interfered with energy metabolism and DNA replication, and finally led to the death of L. monocytogenes. The present study provides evidence that moringin exhibits strong antimicrobial activity against L. monocytogenes and insight into its potential mechanism.

Nanoarchitectonics for Biodegradable Superabsorbent Based on Carboxymethyl Starch and Chitosan Cross-Linked with Vanillin

Due to the growing demand for sustainable hygiene products (that will exhibit biodegradability and compostability properties), the challenge of developing a superabsorbent polymer that absorbs significant amounts of liquid has been raised so that it can be used in the hygiene sector in the future. The work covers the study of the swelling and dehydration kinetics of hydrogels formed by grafting polymerization of carboxymethyl starch (CMS) and chitosan (Ch). Vanillin (Van) was used as the crosslinking agent. The swelling and dehydration kinetics of the polymers were measured in various solutes including deionized water buffers with pH from 1 to 12 and in aqueous solutions of sodium chloride at 298 and 311 K. The surface morphology and texture properties of the analyzed hydrogels were observed by scanning electron microscopy (SEM). The influence of this structure on swelling and dehydration is discussed. Fourier transform infrared (FTIR) analyses confirmed the interaction between the carboxymethyl starch carbonyl groups and the chitosan amino groups in the resulting hydrogels. Additionally, spectroscopic analyses confirmed the formation of acetal crosslink bridges including vanillin molecules. The chemical dynamics studies revealed that new hydrogel dehydration kinetics strongly depend on the vanillin content. The main significance of the study concerns the positive results of the survey for the new superabsorbent polymer material, coupling high fluid absorbance with biodegradability. The studies on biodegradability indicated that resulting materials show good environmental degradability characteristics and can be considered true biodegradable superabsorbent polymers.

Polycationic Glycopolymer Demonstrates Activity Against Persisters and Biofilms of Non-tuberculosis Mycobacteria Cystic Fibrosis Clinical Isolates in vitro

Non-tuberculosis Mycobacterium (NTM) is a group of opportunistic pathogens associated with pulmonary infections that are difficult to diagnose and treat. Standard treatment typically consists of prolonged combination antibiotic therapy. Antibiotic resistance and the role of biofilms in pathogen communities, such as NTM persister cells, is an important unmet challenge that leads to increased toxicity, frequent relapse, poor clinical management, and an extended treatment period. Infection recurrence and relapse are not uncommon among individuals with cystic fibrosis (CF) or chronic obstructive pulmonary disease (COPD), where thick mucus supports bacterial biofilm production and impairs mucociliary clearance. The study evaluates a membrane-active cationic glycopolymer [poly (acetyl, arginyl) glucosamine (PAAG)] being developed to support the safe and effective treatment of NTM biofilm infections. PAAG shows antibacterial activity against a wide range of pathogenic bacteria at concentrations non-toxic to human epithelial cells. Time-kill curves demonstrated PAAG’s rapid bactericidal potential at concentrations as low as 1X MIC against all NTM strains tested and compared to the standard of care. PAAG treatment prevents persister formation and eradicates antibiotic-induced persister cells in planktonic NTM cultures below the limit of detection (10 colony-forming unit (CFU)/ml). Further, PAAG showed the ability to penetrate and disperse NTM biofilms formed by both rapidly and slowly growing strains, significantly reducing the biofilm biomass (p < 0.0001) compared to the untreated NTM biofilms. Microscopical examination confirmed PAAG’s ability to disrupt and disperse mycobacterial biofilms. A single PAAG treatment resulted in up to a 25-fold reduction in live-labeled NTM and a 78% reduction in biofilm thickness. Similar to other polycationic molecules, PAAG’s bactericidal and antibiofilm activities employ rapid permeabilization of the outer membrane of the NTM strains, and subsequently, reduce the membrane potential even at concentrations as low as 50 μg/ml (p < 0.001). The outcomes of these in vitro analyses suggest the importance of this polycationic glycopolymer, PAAG, as a potential therapeutic agent for opportunistic NTM infections.

Characterization of the selective binding of modified chitosan nanoparticles to Gram-negative bacteria strains

Chitosan is a nature-sourced polysaccharide widely used in numerous applications. The antibacterial potential of chitosan has attracted researchers to further develop and utilize this polymer for the formation of biocompatible antibacterial agents for both the food and healthcare industries. The tested hypothesis in this study is that modified N-alkylaminated chitosan nanoparticles (CNPs) have selective binding properties to Gram-negative bacteria strains that result in bacterial aggregation. Various bacterial strains were tested of five Gram-negative bacteria including Erwinia carotovora, Escherichia coli, Pseudomonas aeruginosa, Salmonella, and Serratia marcescens, as well as three Gram-positive bacteria strains including Bacillus licheniformis, Bacillus megaterium, and Bacillus subtilis. The fluorescence microscopy characterization showed that the presence of CNPs caused the aggregation of Escherichia coli bacteria cells, where modified CNPs with a shorter chain length of the substituent caused a higher aggregation effect. Moreover, it was found that the CNPs exhibited a selective binding behavior to Gram-negative as compared to Gram-positive bacteria strains, mainly to Escherichia coli and Salmonella. Also, the scanning electron microscopy characterization showed that CNPs exhibited selective binding to Gram-negative bacteria, which was especially understood when both Gram-negative and Gram-positive bacteria strains were within the same sample. In addition, the bacterial viability assay suggests that CNPs with a lower degree of substitution have a higher inhibitory effect on bacterial growth. CNPs with longer side chains had a less inhibitory effect on the bacterial growth of Gram-negative strains, where a concentration-dependent response pattern was only seen for the cases of Gram-negative strains, and not for the case of Gram-positive strain. To conclude, the further understanding of the selective binding of CNPs to Gram-negative bacteria strains may produce new opportunities for the discovery and characterization of effective antibacterial agents.

Preparation and application of chitosan-based fluorescent probes

Biomass materials have abundant natural resources, renewability and good biochemical compatibility, so biomass-based fluorescent materials prepared from biomass materials have gradually become a research hotspot.

Macroporous zwitterionic composite cryogel based on chitosan oligosaccharide for antifungal application

Chitosan oligosaccharide (COS), a time-dependent antimicrobial carbohydrate, is found antifungal active with a short duration of action due to excessive solubility. We attempted to address this issue by employing a hydrogel as a COS carrier. In this research, macroporous zwitterionic composite cryogels composed of COS and poly(N-methacryl arginine) (PMarg) were fabricated, serving as long-term antifungal dressings. Firstly, Marg was synthesized and characterized by Fourier transform infrared spectroscopy (FT-IR), ¹H and ¹³C nuclear magnetic resonance (NMR), and high-resolution mass spectrometry (HRMS). Then, the COS/PMarg cryogels were prepared by redox initiation cryopolymerization. The macroporous morphology of the cryogels was confirmed by scanning electron microscope (SEM) with pore size varying from 20.86 to 50.87 μm. FTIR indicated that hydrogen bonding formed between COS and PMarg, and the interaction elevated thermal stability of the cryogels as evidenced by thermal-gravimetric analysis (TGA). Swelling capacity, mechanical properties, and COS release behavior of the COS/PMarg cryogels were investigated. With the release of COS, the antifouling activity of the cryogel increased. Antimicrobial tests indicated the COS/PMarg cryogel could effectively inhibit the proliferation of Candida albicans. It demonstrated that the macroporous zwitterionic COS/PMarg composite cryogel might be a potential antifungal dressing with sequential "sterilization-release" capacity.

Biological fabrication and electrostatic attractions of new layered silver/talc nanocomposite using Lawsonia inermis L. and its chitosan-capped inorganic/organic hybrid: Investigation on acceleration of Staphylococcus aureus and Pseudomonas aeruginosa infected wound healing

In the present study, new-layered inorganic/organic hybrid of silver/talc nanocomposites (Ag/Tlc-NPs) and its chitosan-capped derivative (Ag/Tlc/Csn NCs) were biochemically synthesized utilizing Lawsonia inermis L. extract. The silver nanoparticles (Ag NPs) were synthesized employing green method on the exterior surface layer of talc mineral as a solid substrate. The negatively charged surface layer of talc might function as templates and can attract the chitosan cations from a solution to yield a layered hybrid structure, whose inorganic phase is formed by Si-O-Ag bonds. Our results revealed that Ag NPs were formed on the exterior surface of talc with a diameter with size of 124-215 nm. In addition, cytotoxicity, in vitro antibacterial activity, and clinical effects of wound-healing ointments containing talc were investigated. The results implied the successful synthesis of Ag/Tlc/Csn NCs using the extract. The structures were safe up to 0.50 mg/mL. In vitro studies confirmed antioxidant and antibacterial properties of Ag/Tlc/Csn NCs. In sum, our findings showed that the ointments improve wound healing process by inducing an anti-inflammatory M2 phenotype and bFGF, CD206, collagen1A, and IL-10 production that causes fibroblast migration and wound closure through influencing M2 macrophage. Ag/Tlc/Csn is suggested to be taken into consideration as a medical combination for improving infected wound healing and as a promising agent for clinical administration.

Biopolymer-based flocculants: a review of recent technologies

Biopolymer-based flocculants have become a potential substitute for inorganic coagulants and synthetic organic flocculants due to their wide natural reserves, environmental friendliness, easy natural degradation, and high material safety. In recent years, with more and more attention to clean technologies, a lot of researches on the modification and application of biopolymer-based flocculants have been carried out. The present paper reviews the latest important information about the base materials of biopolymer-based flocculants, including chitosan, starch, cellulose, and lignin etc. This review also highlights the various modification methods of these base materials according to reaction types in detail. Via the recent researches, the flocculation mechanisms of biopolymer-based flocculants, such as adsorption, bridging, charge neutralization, net trapping, and sweeping, as well as, some other special mechanisms are comprehensively summarized. This paper also focuses on the water treatment conditions, the removal efficiency, and advantages of biopolymer-based flocculants in applications. Further, this review sheds light on the future perspectives of biopolymer-based flocculants, which may make progress in the sources of base materials, modification processes, multi-function, and deepening application researches. We believe that this review can guide the further researches and developments of biopolymer-based flocculants in the future, to develop them with a higher efficiency, a lower cost, more safety, and multi-function for more diversified applications. Graphical abstract.

Effectiveness of Green Synthesis of Silver/Kaolinite Nanocomposite Using Quercus infectoria Galls Aqueous Extract and Its Chitosan-Capped Derivative on the Healing of Infected Wound

Kaolinite nanocomposites (NCs) could be utilized as agents for wound healing owing to their efficiency and low toxicity. The present study was conducted to synthesize a novel silver/kaolinite NCs (Ag/Kaol NCs) and investigate their chitosan derivation (Ag/Kaol/Chit NCs) using oak extract. XRD, SEM, EDX, FT-IR, and DLS were employed for the investigation of structural and physio-chemical properties of the synthesized NCs. The obtained results revealed that synthesized Ag/Kaol NCs were mesoporous and spherical with sizes ranging from 7-11 nm. They also demonstrated successful synthesis between silver and kaolinite using the extract. Cytotoxicity and in vitro antibacterial activity were also investigated. The clinical effects of ointments containing the NCs for improving wound healing were studied on the wound area, total bacterial count, histological parameters, and protein expression of some genes. Nanocomposites were safe up to 0.50 mg/mL. The results of in vivo and in vitro antibacterial activity showed that Ag/Kaol NCs, were of antibacterial activity ( ). The results of antioxidant activity indicated that Ag/Kaol NCs have antioxidant structures. Our findings concerning molecular mechanism implied that Ag/Kaol/Chit increased the expression of Wnt/ β -catenin and collagen ( ). In sum, Ag/Kaol/Chit showed antibacterial activity and improved wound healing by decreasing the inflammation and promoting the proliferative phase. The novel NCs showed wound healing properties by decreasing inflammation and total bacterial count and increasing proliferative phase. The application of Ag/Kaol/Chit was suggested as a green agent for improving infected wound healing.

Recent Advances in Polymer-Based Vaginal Drug Delivery Systems

The vagina has been considered a potential drug administration route for centuries. Most of the currently marketed and investigated vaginal formulations are composed with the use of natural or synthetic polymers having different functions in the product. The vaginal route is usually investigated as an administration site for topically acting active ingredients; however, the anatomical and physiological features of the vagina make it suitable also for drug systemic absorption. In this review, the most important natural and synthetic polymers used in vaginal products are summarized and described, with special attention paid to the properties important in terms of vaginal application. Moreover, the current knowledge on the commonly applied and innovative dosage forms designed for vaginal administration was presented. The aim of this work was to highlight the most recent research directions and indicate challenges related to vaginal drug administrations. As revealed in the literature overview, intravaginal products still gain enormous scientific attention, and novel polymers and formulations are still explored. However, there are research areas that require more extensive studies in order to provide the safety of novel vaginal products.

Factor XIII Cross-Linked Adhesive Chitosan Hydrogels

Biomedical adhesives have been found to be an attractive alternative to suturing in several circumstances. However, to date most of the clinically approved formulations are based on synthetic and highly reactive toxic chemicals. In this work, we aimed to combine for the first time the bioactive properties of the cationic polysaccharide chitosan and its intrinsic electrostatic binding to negatively charged tissues with the biocompatible and clinically compliant enzymatic cross-linking scheme of fibrin glue. This synergistic activity led to the generation of a transglutaminase Factor XIII cross-linkable chitosan formulation with fast gelation kinetics, tunable mechanical properties, antibacterial activity, and strong adhesion to cartilage.

The biological synthesis of gold/perlite nanocomposite using Urtica dioica extract and its chitosan-capped derivative for healing wounds infected with methicillin-resistant Staphylococcus aureus

The preparation of ointments from natural compounds is essential for accelerating infected wounds. This study investigated the effects of topical uses of gold nanoparticles (Au)/perlite (Au/Perl) nanocomposites (NCs) by the help of Urtica dioica extract and its chitosan-capped derivative (Chit) on methicillin-resistant Staphylococcus aureus (MRSA)-infected wound healing in a mouse model. Furthermore, Au/Perl/Chit nanocomposite was prepared using protonated chitosan solution. The physicochemical properties of the as-synthesized nanocomposites were also investigated. The effects of Au/Perl/Chit NC were assessed by antibacterial, histopathological parameters as well as molecular evaluations. Then, they were compared with synthetic agent of mupirocin. The results revealed that Au/Perl NC was mesoporous and spherical in a range of 13-15 nm. Topical administration of Au/Perl/Chit ointment accelerated wound healing by reducing bacteria colonization and wound rate enhancing collagen biosynthesis and re-epithelialization, the expressions of IL-10, PI3K, AKT, bFGF, and COL1A genes, which is in agreement with the obtained results for mupirocin. In conclusion, the results strongly demonstrated that administration of ointments prepared from Au/Perl and Au/Perl/Chit nanocomposites stimulates MRSA-infected wound healing by decreasing the length of healing time and regulating PI3K/AKT/bFGF signaling pathway and is a promising candidate in stimulating MRSA-infected wound regeneration.

Antibacterial Behavior of Chitosan-Sodium Hyaluronate-PEGDE Crosslinked Films

Chitosan is a natural polymer that can sustain not only osteoblast adhesion and proliferation for bone regeneration purposes, but it is also claimed to exhibit antibacterial properties towards several Gram-positive and Gram-negative bacteria. In this study, chitosan was modified with sodium hyaluronate, crosslinked with polyethylene glycol diglycidyl ether (PEGDE) and both osteoblast cytotoxicity and antibacterial behavior studied. The presence of sodium hyaluronate and PEGDE on chitosan was detected by FTIR, XRD, and XPS. Chitosan (CHT) films with sodium hyaluronate crosslinked with PEGDE showed a better thermal stability than pristine hyaluronate. In addition, osteoblast cytocompatibility improved in films containing sodium hyaluronate. However, none of the films exhibit antimicrobial activity against Escherichia coli, Enterococcus faecalis, and Staphylococcus aureus while exhibiting low to mild activity against Salmonella typhimurion.

Antibacterial Activity of N,O-Acylated Chitosan Derivative

The antibacterial activity of N,O-acylated chitosan derivative with linoleic acid (CH_LA) was tested by disc and well diffusion, agar impregnation and microdilution methods against Staphylococcus aureus, Escherichia coli and Helicobacter pylori strains. Hydrophobically modified chitosan (HMC) was expected to exhibit enhanced antibacterial activity and specific mucin interactions. Although diffusion tests have not indicated the antibacterial potential of chitosan (CH) or CH_LA, the results of the microdilution method demonstrated that tested polymers significantly reduced the amount of living bacteria cells in different concentrations depending on the microorganism. Additionally, CH_LA was characterized by enhanced antibacterial activity compared to CH, which may suggest a different mechanism of interaction with S. aureus and H. pylori. Furthermore, the UV-VIS analysis revealed that the amphiphilic character of derivative led to strong CH_LA–mucin interactions. The study proved the high potential of CH_LA in antibacterial applications, especially for the gastrointestinal tract.

Wound dressing of chitosan-based-crosslinked gelatin/ polyvinyl pyrrolidone embedded silver nanoparticles, for targeting multidrug resistance microbes

Wound dressing composed of chitosan, based crosslinked gelatin/ polyvinyl pyrrolidone, embedded silver nanoparticles were fabricated using solution casting method. The membrane was characterized by FTIR, SEM and TGA. Glutaraldehyde (0.5 %) was used for the crosslinking of membrane components and associated with 7-folds boosted mechanical performance, 28 % more hydrolytic stability, 3-folds thickness reduction and morphological roughness. Silver nanoparticles were characterized by UV-vis, XRD and TEM for an average size of 9.9 nm. The membrane with higher concentration of silver nanoparticles showed maximum antibacterial activity against human pathogenic bacteria; and the measured inhibition zones ranged from 1.5 to 3 cm. The activity of the particles ranged from severe to complete reduction in Penicillin, Erythromycin and Macrolide family's resistance genes expression such as β-Lactamase, mecA and erm. This developed membrane can serve as promising and cost-effective system against severe diabetic and burn wound infections.

Chitosan: Structural modification, biological activity and application

Many by-products that are harmful to the environment and human health are generated during food processing. However, these wastes are often potential resources with high-added value. For example, crustacean waste contains large amounts of chitin. Chitin is one of the most abundant polysaccharides in natural macromolecules, and is a typical component of crustaceans, mollusks, insect exoskeleton and fungal cell walls. Chitosan is prepared by deacetylation of chitin and a copolymer of D-glucosamine and N-acetyl-D-glucosamine through β-(1 → 4)-glycosidic bonds. Chitosan has better solubility, biocompatibility and degradability compared with chitin. This review introduces the preparation, physicochemical properties, chemical and physical modification methods of chitosan, which could help us understand its biological activities and applications. According to the latest reports, the antibacterial activity, antioxidant, immune and antitumor activities of chitosan and its derivatives are summarized. Simultaneously, the various applications of chitosan and its derivatives are reviewed, including food, chemical, textile, medical and health, and functional materials. Finally, some insights into its future potential are provided, including novel modification methods, directional modification according to structure-activity relationship, activity and application development direction, etc.

Polycaprolactone nanofiber coated with chitosan and Gamma oryzanol functionalized as a novel wound dressing for healing infected wounds

This study was conducted to design and evaluate a wound dressing based on a polycaprolactone (PCL) nanofiber coated with gamma oryzanol (GO) and chitosan (CS) in mice model. All the dressings were prepared by electrospinning method, and their morphology and physical properties were investigated. The mice were divided into five groups and treated with I) PCL-sole (PCL), III) PCL-mupirocin (PCL-M), IV) PCL-GO, IV) PCL-CS, and V) PCL-CS-GO. Wound area, total bacterial count, histopathological parameters, and expressions of IL-1β, TNF-α, IL-10, MMP-9, EGF, and VEGF were assessed. The fibers were randomly distributed in PCL group, but loading CS and GO increased the complexity and placing on the dressings. PCLs loaded with GO and CS showed lower viscosity, surface tension, and fiber diameter and higher conductivity and water contact angle compared to unloaded PCLs (P < 0.05). The treatment with PCLs loaded with mupirocin, CS, and GO significantly reduced wound area and total bacterial count (P < 0.05). Loading PCLs with mupirocin, CS, and GO decreased the expressions of IL-1β, TNF-α, MMP-9, but increased the expressions of IL-10 and VEGF compared to the unloaded PCL group (P < 0.05). The most optimal responses to wound healing and physical parameters belonged to the PCL-CS-GO group.

Chitosan-Based Non-viral Gene and Drug Delivery Systems for Brain Cancer

Central nervous system (CNS) tumors are a leading source of morbidity and mortality worldwide. Today, different strategies have been developed to allow targeted and controlled drug delivery into the brain. Gene therapy is a system based on the modification of patient's cells through the introduction of genetic material to exert a specific action. Administration of the foreign genetic material can be done through viral-mediated delivery or non-viral delivery via physical or mechanical systems. For brain cancer specifically, gene therapy can overcome the actual challenge of blood brain barrier penetration, the main reason for therapeutic failure. Chitosan (CS), a natural based biodegradable polymer obtained from the exoskeleton of crustaceans such as crab, shrimp, and lobster, has been used as a delivery vehicle in several non-viral modification strategies. This cationic polysaccharide is highly suitable for gene delivery mainly due to its chemical properties, its non-toxic nature, its capacity to protect nucleic acids through the formation of complexes with the genetic material, and its ease of degradation in organic environments. Recent evidence supports the use of CS as an alternative gene delivery system for cancer treatment. This review will describe multiple studies highlighting the advantages and challenges of CS-based delivery structures for the treatment of brain tumors. Furthermore, this review will provide insight on the translational potential of various CS based-strategies in current clinical cancer studies. Specifically, CS-based nanostructures including nanocapsules, nanospheres, solid-gel formulations, and nanoemulsions, also microshperes and micelles will be evaluated.

Chitosan and its Derivatives for Ocular Delivery Formulations: Recent Advances and Developments

Chitosan (CS) is a hemi-synthetic cationic linear polysaccharide produced by the deacetylation of chitin. CS is non-toxic, highly biocompatible, and biodegradable, and it has a low immunogenicity. Additionally, CS has inherent antibacterial properties and a mucoadhesive character and can disrupt epithelial tight junctions, thus acting as a permeability enhancer. As such, CS and its derivatives are well-suited for the challenging field of ocular drug delivery. In the present review article, we will discuss the properties of CS that contribute to its successful application in ocular delivery before reviewing the latest advances in the use of CS for the development of novel ophthalmic delivery systems. Colloidal nanocarriers (nanoparticles, micelles, liposomes) will be presented, followed by CS gels and lenses and ocular inserts. Finally, instances of CS coatings, aiming at conferring mucoadhesiveness to other matrixes, will be presented.