Poly(amido-amine)-based hydrogels with tailored mechanical properties and degradation rates for tissue engineering

Click Chemistry Hydrogels for Extrusion Bioprinting: Progress, Challenges, and Opportunities

The emergence of 3D bioprinting has allowed a variety of hydrogel-based "bioinks" to be printed in the presence of cells to create precisely defined cell-loaded 3D scaffolds in a single step for advancing tissue engineering and/or regenerative medicine. While existing bioinks based primarily on ionic cross-linking, photo-cross-linking, or thermogelation have significantly advanced the field, they offer technical limitations in terms of the mechanics, degradation rates, and the cell viabilities achievable with the printed scaffolds, particularly in terms of aiming to match the wide range of mechanics and cellular microenvironments. Click chemistry offers an appealing solution to this challenge given that proper selection of the chemistry can enable precise tuning of both the gelation rate and the degradation rate, both key to successful tissue regeneration; simultaneously, the often bio-orthogonal nature of click chemistry is beneficial to maintain high cell viabilities within the scaffolds. However, to date, relatively few examples of 3D-printed click chemistry hydrogels have been reported, mostly due to the technical challenges of controlling mixing during the printing process to generate high-fidelity prints without clogging the printer. This review aims to showcase existing cross-linking modalities, characterize the advantages and disadvantages of different click chemistries reported, highlight current examples of click chemistry hydrogel bioinks, and discuss the design of mixing strategies to enable effective 3D extrusion bioprinting of click hydrogels.

Semi-Crystalline Hydrophobic Polyamidoamines: A New Family of Technological Materials?

The hitherto known polyamidoamines (PAAs) are not suitable as structural materials because they are usually water-soluble or swellable in water. This paper deals with the synthesis and characterization of semi-crystalline hydrophobic PAAs (H-PAAs) by combining different bis-sec-amines with bis-acrylamides obtained from C6–C12 bis-prim-amines. H-PAAs were initially obtained in a solution of benzyl alcohol, a solvent suitable for both monomers and polymers. Their number average molecular weights, M¯n, which were determined with ¹H-NMR by evaluating the percentage of their terminal units, varied from 6000 to >10,000. The solubility, thermal properties, ignitability and water resistance of H-PAAs were determined. They were soluble in organic solvents, semi-crystalline and thermally stable. The most promising ones were also prepared using a bulk process, which has never been previously reported for PAA synthesis. In the form of films, these H-PAAs were apparently unaffected by water. The films underwent tensile and wettability tests. They showed similar Young moduli (260–263 MPa), whereas the maximum stress and the stress at break depended on the number of methylene groups of the starting bis-acrylamides. Their wettability was somewhat higher than that of common Nylons. Interestingly, none of the H-PAAs considered, either as films or powders, ignited after prolonged exposure to a methane flame.

Spray-On Nanocomposite Coatings: Wettability and Conductivity

Nanocomposite coatings, i.e., a combination of nanocompounds, and a polymer matrix together with suitable additives and solvents is a very versatile method for producing multifunctional coatings. Some of the most desired coating properties have a high repellency to liquids (e.g., superhydrophobic and/or superoleophobic) and electrical and thermal conductivities. From a practical perspective, coatings that can be sprayed are very suitable for large-scale production, conformity, and reduced time and cost. Carbon-based, metallic, and ceramic are the three groups of nanocompounds commonly used to formulate spray-on nanocomposite coatings. In this invited feature article, we discuss the applications, advantages, and challenges of using such nanocompounds to produce coatings with good water repellency or/and elevated electrical or/and thermal conductivities. We also discuss the role of additives and solvents briefly in relation to the properties of the coatings. Important spraying parameters, such as stand-off distance and its influence on the final coating properties, will also be examined. Our overall aim is to provide a guideline for the production of practical multifunctional nanocomposites utilizing carbon-based, metallic, or ceramic nanoparticles or nanofibers that covers both aspects of in-air wettability and conductivity under one umbrella.

Highlight on the Mechanism of Linear Polyamidoamine Degradation in Water

This paper aims at elucidating the degradation mechanism of linear polyamidoamines (PAAs) in water. PAAs are synthesized by the aza-Michael polyaddition of prim-monoamines or bis-sec-amines with bisacrylamides. Many PAAs are water-soluble and have potential for biotechnological applications and as flame-retardants. PAAs have long been known to degrade in water at pH ≥ 7, but their degradation mechanism has never been explored in detail. Filling this gap was necessary to assess the suitability of PAAs for the above applications. To this aim, a small library of nine PAAs was expressly synthesized and their degradation mechanism in aqueous solution studied by 1H-NMR in different conditions of pH and temperature. The main degradation mechanism was in all cases the retro-aza-Michael reaction triggered by dilution but, in some cases, hints were detected of concurrent hydrolytic degradation. Most PAAs were stable at pH 4.0; all degraded at pH 7.0 and 9.0. Initially, the degradation rate was faster at pH 9.0 than at pH 7.0, but the percent degradation after 97 days was mostly lower. In most cases, at pH 7.0 the degradation followed first order kinetics. The degradation rates mainly depended on the basicity of the amine monomers. More basic amines acted as better leaving groups.

Phosphonic acid-functionalized poly(amido amine) macromers for biomedical applications

Novel phosphonic acid-functionalized poly(amido amine) (PAA) macromers are synthesized through aza-Michael addition of 2-aminoethyl phosphonic acid or its mixture with 5-amino-1-pentanol at different ratios onto N,N'-methylene bis(acrylamide) to control the amount of phosphonic acid functionality. The macromers were homo- and copolymerized with 2-hydroxyethyl methacrylate at different ratios to obtain hydrogels with various hydrophilicities. The hydrogels' swelling, biodegradation and mineralization properties were evaluated. The swelling and degradation rates of the gels can be tuned by the chemical structure of PAA macromer precursors as well as pH and CaCl₂ pre-treatment. The hydrogels show composition-dependent mineralization in SBF and 5xSBF, as evidenced from Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX) analyses. The degradation products of the hydrogels have no effect on U-2 OS, Saos-2 and NIH 3T3 cells, suggesting their cytocompatibility. Overall, these materials have potential to be used as nontoxic degradable biomaterials.

Functional Polymers and Polymeric Materials From Renewable Alpha-Unsaturated Gamma-Butyrolactones

Sustainable chemistry requires application of green processes and often starting materials originate from renewable resources. Biomass-derived monomers based on five-membered γ-butyrolactone ring represent suitable candidates to replace sources of fossil origin. α-Methylene-γ-butyrolactone, β-hydroxy-α-methylene-γ-butyrolactone, and β- and γ-methyl-α-methylene-γ-butyrolactones bearing exocyclic double bond are available directly by isolation from plants or derived from itaconic or levulinic acids available from biomass feedstock. Exocyclic double bond with structural similarity with methacrylates is highly reactive in chain-growth polymerization. Reaction involves the linking of monomer molecules through vinyl double bonds in the presence of initiators typical for radical, anionic, zwitterionic, group-transfer, organocatalytic, and coordination polymerizations. The formed polymers containing pendant ring are characterized by high glass transition temperature (T g > 195°C) and render decent heat, weathering, scratch, and solvent resistance. The monomers can also be hydrolyzed to open the lactone ring and form water-soluble monomers. Subsequent radical copolymerization in the presence of cross-linker can yield to hydrogels with superior degree of swelling and highly tunable characteristics, depending on the external stimuli. The five-membered lactone ring allows copolymerization of these compounds by ring opening polymerization to provide polyesters with preserved methylene functionality. In addition, both the lactone ring and the methylene double bond can be attacked by amines. Polyaddition with di- or multi-amines leads to functional poly(amidoamines) with properties tunable by structure of the amines. In this mini-review, we summarize the synthetic procedures for preparation of polymeric materials with interesting properties, including thermoplastic elastomers, acrylic latexes, stimuli-sensitive superabsorbent hydrogels, functional biocompatible polyesters, and poly(amidoamines).

Decoration of RGD-mimetic porous scaffolds with engineered and devitalized extracellular matrix for adipose tissue regeneration

Fat grafting is emerging as a promising alternative to silicon implants in breast reconstruction surgery. Unfortunately, this approach does not provide a proper mechanical support and is affected by drawbacks such as tissue resorption and donor site morbidity. Synthetic scaffolds can offer a valuable alternative to address these challenges, but poorly recapitulate the biochemical stimuli needed for tissue regeneration. Here, we aim at combining the positive features of a structural, synthetic polymer to an engineered, devitalized extracellular matrix (ECM) to generate a hybrid construct that can provide a mix of structural and biological stimuli needed for adipose tissue regeneration. A RGD-mimetic synthetic scaffold OPAAF, designed for soft tissue engineering, was decorated with ECM deposited by human adipose stromal cells (hASCs). The adipoinductive potential of the hybrid ECM-OPAAF construct was validated in vitro, by culture with hASC in a perfusion bioreactor system, and in vivo, by subcutaneous implantation in nude mouse. Our findings demonstrate that the hybrid ECM-OPAAF provides proper mechanical support and adipoinductive stimuli, with potential applicability as off-the-shelf material for adipose tissue reconstruction.

STATEMENT OF SIGNIFICANCE

In this study we combined the functionalities of a synthetic polymer with those of an engineered and subsequently devitalized extracellular matrix (ECM) to generate a hybrid material for adipose tissue regeneration. The developed hybrid ECM-OPAAF was demonstrated to regulate human adipose stromal cells adipogenic commitment in vitro and adipose tissue infiltration in vivo. Our findings demonstrate that the hybrid ECM-OPAAF provide proper mechanical support and adipoinductive stimuli and represents a promising off-the-shelf material for adipose tissue reconstruction. We believe that our approach could offer an alternative strategy for adipose tissue reconstruction in case of mastectomy or congenital abnormalities, overcoming the current limitations of autologous fat based strategies such as volume resorption and donor site morbidity.

Biomaterials for the Delivery of Growth Factors and Other Therapeutic Agents in Tissue Engineering Approaches to Bone Regeneration

Bone fracture followed by delayed or non-union typically requires bone graft intervention. Autologous bone grafts remain the clinical "gold standard". Recently, synthetic bone grafts such as Medtronic's Infuse Bone Graft have opened the possibility to pharmacological and tissue engineering strategies to bone repair following fracture. This clinically-available strategy uses an absorbable collagen sponge as a carrier material for recombinant human bone morphogenetic protein 2 (rhBMP-2) and a similar strategy has been employed by Stryker with BMP-7, also known as osteogenic protein-1 (OP-1). A key advantage to this approach is its "off-the-shelf" nature, but there are clear drawbacks to these products such as edema, inflammation, and ectopic bone growth. While there are clinical challenges associated with a lack of controlled release of rhBMP-2 and OP-1, these are among the first clinical examples to wed understanding of biological principles with biochemical production of proteins and pharmacological principles to promote tissue regeneration (known as regenerative pharmacology). After considering the clinical challenges with such synthetic bone grafts, this review considers the various biomaterial carriers under investigation to promote bone regeneration. This is followed by a survey of the literature where various pharmacological approaches and molecular targets are considered as future strategies to promote more rapid and mature bone regeneration. From the review, it should be clear that pharmacological understanding is a key aspect to developing these strategies.

An Injectable System for Local and Sustained Release of Antimicrobial Agents in the Periodontal Pocket

Periodontitis treatments usually require local administration of antimicrobial drugs with the aim to reduce the bacterial load inside the periodontal pocket. Effective pharmaceutical treatments may require sustained local drug release for several days in the site of interest. Currently available solutions are still not able to fulfill the clinical need for high-quality treatments, mainly in terms of release profiles and patients' comfort. This work aims to fill this gap through the development of an in situ gelling system, capable to achieve controlled and sustained release of antimicrobial agents for medium-to-long-term treatments. The system is composed of micrometer-sized β-cyclodextrin-based hydrogel (bCD-Jef-MPs), featured by a strong hydrophilic character, suspended in a synthetic block-co-polymer solution (Poloxamer 407), which is capable to undergo rapid thermally induced sol-gel phase transition at body temperature. The chemical structure of bCD-Jef-MPs was confirmed by cross-correlating data from Fourier transform infrared (FTIR) spectroscopy, swelling test, and degradation kinetics. The thermally induced sol-gel phase transition is demonstrated by rheometric tests. The effectiveness of the described system to achieve sustained release of antimicrobial agents is demonstrated in vitro, using chlorhexidine digluconate as a drug model. The results achieved in this work disclose the potential of the mentioned system in effectively treating periodontitis lesions.

Photocrosslinked poly(amidoamine) nanoparticles for central nervous system targeting

This study presents an innovative method for the synthesis of polymeric nanoparticles (NPs) for central nervous system (CNS) targeting. The method is based on Ultraviolet light (UV)-induced crosslinking of diacrylamide-terminated oligomers of poly(amidoamine)s (PAAs), a widely used class of synthetic polymers in biomedical field research, especially in drug delivery thanks to their excellent biocompatibility and controlled biodegradability. Previous attempts aiming at preparing PAA-based NPs by self-assembly were challenged by lack of structural stability and consequently their early degradation and premature drug release. Here, the UV-induced crosslinked PAA NPs demonstrated to overcome main disadvantages of the self-assembled ones, as they showed improved stability and controlled release properties. Besides the remarkable efficiency to produce monodisperse and stable PAA NPs, the UV-induced crosslinking method is featured by great versatility and low environmental impact, since it does not require use of organic solvents and multiple purification steps. The capability of PAA NPs to encapsulate a fluorescently labelled model protein was experimentally demonstrated in this study. Cell culture experiments showed that PAA NPs were biocompatible and highly permeable across an in vitro blood-brain barrier model, thus highlighting their great potential as drug delivery vectors for CNS delivery.

Preparation of γ-PGA hydrogels and swelling behaviors in salt solutions with different ionic valence numbers

In this paper, a novel poly γ-glutamic acid (γ-PGA) hydrogel was successfully synthesized by solution polymerization and ethylene glycol diglycidyl ether (EGDE) was used as crosslinker.

Stem Cell Delivery With Polymer Hydrogel for Treatment of Intervertebral Disc Degeneration: From 3D Culture to Design of the Delivery Device for Minimally Invasive Therapy

Nucleus pulposus (NP) tissue damage can induce detrimental mechanical strain on the biomechanical performance of intervertebral discs (IVDs), causing subsequent disc degeneration. A novel, photocurable, injectable, synthetic polymer hydrogel (pHEMA-co-APMA grafted with PAA) has already demonstrated success in encapsulating and differentiating human mesenchymal stem cells (hMSCs) toward an NP phenotype during hypoxic conditions. After demonstration of promising results in our previous work, in this study we have further investigated the inclusion of mechanical stimulation and its impact on hMSC differentiation toward an NP phenotype through the characterization of matrix markers such as SOX-9, aggrecan, and collagen II. Furthermore, investigations were undertaken in order to approximate delivery parameters for an injection delivery device, which could be used to transport hMSCs suspended in hydrogel into the IVD. hMSC-laden hydrogel solutions were injected through various needle gauge sizes in order to determine its impact on postinjection cell viability and IVD tissue penetration. Interpretation of these data informed the design of a potential minimally invasive injection device, which could successfully inject hMSCs encapsulated in a UV-curable polymer into NP, prior to photo-cross-linking in situ.

Biologically and mechanically driven design of an RGD-mimetic macroporous foam for adipose tissue engineering applications

Despite clinical treatments for adipose tissue defects, in particular breast tissue reconstruction, have certain grades of efficacy, many drawbacks are still affecting the long-term survival of new formed fat tissue. To overcome this problem, in the last decades, several scaffolding materials have been investigated in the field of adipose tissue engineering. However, a strategy able to recapitulate a suitable environment for adipose tissue reconstruction and maintenance is still missing. To address this need, we adopted a biologically and mechanically driven design to fabricate an RGD-mimetic poly(amidoamine) oligomer macroporous foam (OPAAF) for adipose tissue reconstruction. The scaffold was designed to fulfil three fundamental criteria: capability to induce cell adhesion and proliferation, support of in vivo vascularization and match of native tissue mechanical properties. Poly(amidoamine) oligomers were formed into soft scaffolds with hierarchical porosity through a combined free radical polymerization and foaming reaction. OPAAF is characterized by a high water uptake capacity, progressive degradation kinetics and ideal mechanical properties for adipose tissue reconstruction. OPAAF's ability to support cell adhesion, proliferation and adipogenesis was assessed in vitro using epithelial, fibroblast and endothelial cells (MDCK, 3T3L1 and HUVEC respectively). In addition, in vivo subcutaneous implantation in murine model highlighted OPAAF potential to support both adipogenesis and vessels infiltration. Overall, the reported results support the use of OPAAF as a scaffold for engineered adipose tissue construct.

Poly-l-Lactic Acid Nanofiber-Polyamidoamine Hydrogel Composites: Preparation, Properties, and Preliminary Evaluation as Scaffolds for Human Pluripotent Stem Cell Culturing

Electrospun poly-l-lactic acid (PLLA) nanofiber mats carrying surface amine groups, previously introduced by nitrogen atmospheric pressure nonequilibrium plasma, are embedded into aqueous solutions of oligomeric acrylamide-end capped AGMA1, a biocompatible polyamidoamine with arg-gly-asp (RGD)-reminiscent repeating units. The resultant mixture is finally cured giving PLLA-AGMA1 hydrogel composites that absorb large amounts of water and, in the swollen state, are translucent, soft, and pliable, yet as strong as the parent PLLA mat. They do not split apart from each other when swollen in water and remain highly flexible and resistant, since the hydrogel portion is covalently grafted onto the PLLA nanofibers via the addition reaction of the surface amine groups to a part of the terminal acrylic double bonds of AGMA1 oligomers. Preliminary tested as scaffolds, the composites prove capable of maintaining short-term undifferentiated cultures of human pluripotent stem cells in feeder-free conditions.

Inherently antioxidant and antimicrobial tannic acid release from poly(tannic acid) nanoparticles with controllable degradability

From a natural polyphenol, Tannic acid (TA), poly(TA) nanoparticles were readily prepared using a single step approach with three different biocompatible crosslinkers; trimethylolpropane triglycidyl ether (TMPGDE), poly(ethylene glycol) diglycidyl ether (PEGGE), and trisodium trimetaphosphate (STMP). P(TA) particles were obtained with controllable diameters between 400 to 800nm with -25mV surface charge. The effect of synthesis conditions, such as the emulsion medium, pH values of TA solution, and the type of crosslinker, on the shape, size, dispersity, yield, and degradability of poly(Tannic Acid) (p(TA)) nanoparticles was systematically investigated. The hydrolytic degradation amount in physiological pH conditions of 5.4, 7.4, and 9.0 at 37.5°C were found to be in the order TMPGDE<PEGGE<STMP. Furthermore, the degradation amounts of TA from p(TA) nanoparticles can be controlled by the appropriate choice of crosslinker, and the pH of releasing media. The highest TA release, 600mg/g, was obtained for TMPGDE-crosslinked p(TA) particles in intestinal pH conditions (pH 9) over 3 days; whereas, a slow and linear TA release profile over almost 30 days was obtained by using PEGGE-crosslinked p(TA) in body fluid pH conditions (pH 7.4). The total phenol content of p(TA) particles was calculated as 70±1μgmL(-1) for 170μgmL(-1) p(TA), and the trolox equivalent antioxidant capacity was found to be 2027±104mM trolox equivalent g(-1). Moreover, p(TA) nanoparticles demonstrated strong antimicrobial effects against common bacterial strains. More interestingly, with a higher concentration of p(TA) particles, higher blood clotting indices were obtained.

Preparation and properties of EDC/NHS mediated crosslinking poly (gamma-glutamic acid)/epsilon-polylysine hydrogels

In this paper, a novel pH-sensitive poly (amino acid) hydrogel based on poly γ-glutamic acid (γ-PGA) and ε-polylysine (ε-PL) was prepared by carbodiimide (EDC) and N-hydroxysuccinimide (NHS) mediated polymerization. The influence of PGA/PL molar ratio and EDC/NHS concentration on the structure and properties was studied. Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS) proved that hydrogels were crosslinked through amide bond linkage, and the conversion rate of a carboxyl group could reach 96%. Scanning electron microscopy (SEM) results showed a regularly porous structure with 20 μm pore size in average. The gelation time in the crosslink process of PGA/PL hydrogels was within less than 5 min. PGA/PL hydrogels had excellent optical performance that was evaluated by a novel optotype method. Furthermore, PGA/PL hydrogels were found to be pH-sensitive, which could be adjusted to the pH of swelling media intelligently. The terminal pH of swelling medium could be controlled at 5 ± 1 after equilibrium when the initial pH was within 3-11. The swelling kinetics was found to follow a Voigt model in deionized water but a pseudo-second-order model in normal saline and phosphate buffer solution, respectively. The differential swelling degrees were attributed to the swelling theory based on the different ratio of -COOH/-NH2 and pore size in hydrogels. The results of mechanical property indicated that PGA/PL hydrogels were soft and elastic. Moreover, PGA/PL hydrogels exhibited excellent biocompatibility by cell proliferation experiment. PGA/PL hydrogels could be degraded in PBS solution and the degradation rate was decreased with the increase of the molar ratio of PL. Considering the simple preparation process and pH-sensitive property, these PGA/PL hydrogels might have high potential for use in medical and clinical fields.

Alkylation of human hair keratin for tunable hydrogel erosion and drug delivery in tissue engineering applications

Polymeric biomaterials that provide a matrix for cell attachment and proliferation while achieving delivery of therapeutic agents are an important component of tissue engineering and regenerative medicine strategies. Keratins are a class of proteins that have received attention for numerous tissue engineering applications because, like other natural polymers, they promote favorable cell interactions and have non-toxic degradation products. Keratins can be extracted from various sources including human hair, and they are characterized by a high percentage of cysteine residues. Thiol groups on reductively extracted keratin (kerateine) form disulfide bonds, providing a more stable cross-linked hydrogel network than oxidatively extracted keratin (keratose) that cannot form disulfide crosslinks. We hypothesized that an iodoacetamide alkylation (or "capping") of cysteine thiol groups on the kerateine form of keratin could be used as a simple method to modulate the levels of disulfide crosslinking in keratin hydrogels, providing tunable rates of gel erosion and therapeutic agent release. After alkylation, the alkylated kerateines still formed hydrogels and the alkylation led to changes in the mechanical and visco-elastic properties of the materials consistent with loss of disulfide crosslinking. The alkylated kerateines did not lead to toxicity in MC3T3-E1 pre-osteoblasts. These cells adhered to keratin at levels comparable to fibronectin and greater than collagen. Alkylated kerateine gels eroded more rapidly than non-alkylated kerateine and this control over erosion led to tunable rates of delivery of rhBMP-2, rhIGF-1, and ciprofloxacin. These results demonstrate that alkylation of kerateine cysteine residues provides a cell-compatible approach to tune rates of hydrogel erosion and therapeutic agent release within the context of a naturally-derived polymeric system.

RGD-mimetic poly(amidoamine) hydrogel for the fabrication of complex cell-laden micro constructs

The potential of the 3D cell culture approach for creating in vitro models for drug screening and cellular studies, has led to the development of hydrogels that are able to mimic the in vivo 3D cellular milieu. To this aim, synthetic polymer-based hydrogels, with which it is possible to fine-tune the chemical and biophysical properties of the cell microenvironment, are becoming more and more acclaimed. Of all synthetic materials, poly(amidoamine)s (PAAs) hydrogels are known to have promising properties. In particular, PAAs hydrogels containing the 2,2-bisacrylamidoacetic acid-agmatine monomeric unit are capable of enhancing cellular adhesion by interacting with the RGD-binding αVβ3 integrin. The synthesis of a new photocrosslinkable, biomimetic PAA-Jeffamine®-PAA triblock copolymer (PJP) hydrogel is reported in this paper with the aim of improving the optical, biocompatibility and cell-adhesion properties of previously studied PAA hydrogels and providing an inexpensive alternative to the RGD peptide based hydrogels. The physicochemical properties of PJP hydrogels are extensively discussed and the behavior of 2D and 3D cell cultures was analyzed in depth with different cell types. Moreover, cell-laden PJP hydrogels were patterned with perfusable microchannels and seeded with endothelial cells, in order to investigate the possibility of using PJP hydrogels for fabricating cell laden tissue-like micro constructs and microfluidic devices. Overall the data obtained suggest that PJP could ultimately become a useful tool for fabricating improved in vitro models in order to potentially enhance the effectiveness of drug screening and clinical treatments.

Three-dimensional hypoxic culture of human mesenchymal stem cells encapsulated in a photocurable, biodegradable polymer hydrogel: a potential injectable cellular product for nucleus pulposus regeneration

Nucleus pulposus (NP) tissue damage can induce detrimental mechanical stresses and strains on the intervertebral disc, leading to disc degeneration. This study demonstrates the potential of a novel, photo-curable, injectable, synthetic polymer hydrogel (pHEMA-co-APMA grafted with polyamidoamine (PAA)) to encapsulate and differentiate human mesenchymal stem cells (hMSC) towards a NP phenotype under hypoxic conditions which could be used to restore NP tissue function and mechanical properties. Encapsulated hMSC cultured in media (hMSC and chondrogenic) displayed good cell viability up to day 14. The genotoxicity effects of ultraviolet (UV) on hMSC activity confirmed the acceptability of 2.5min of UV light exposure to cells. Cytotoxicity investigations revealed that hMSC cultured in media containing p(HEMA-co-APMA) grafted with PAA degradation product (10% and 20%v/v concentration) for 14days significantly decreased the initial hMSC adhesion ability and proliferation rate from 24hrs to day 14. Successful differentiation of encapsulated hMSC within hydrogels towards chondrogenesis was observed with elevated expression levels of aggrecan and collagen II when cultured in chondrogenic media under hypoxic conditions, in comparison with culture in hMSC media for 14days. Characterization of the mechanical properties revealed a significant decrease in stiffness and modulus values of cellular hydrogels in comparison with acellular hydrogels at both day 7 and day 14. These results demonstrate the potential use of an in vivo photo-curable injectable, synthetic hydrogel with encapsulated hMSC for application in the repair and regeneration of NP tissue.