Creating capillary networks within human engineered tissues: impact of adipocytes and their secretory products

Heparan Sulfate: A Regulator of White Adipocyte Differentiation and of Vascular/Adipocyte Interactions

White adipose tissues are major endocrine organs that release factors, termed adipokines, which affect other major organ systems. The development and functions of adipose tissues depend largely upon the glycosaminoglycan heparan sulfate. Heparan sulfate proteoglycans (HSPGs) surround both adipocytes and vascular structures and facilitate the communication between these two components. This communication mediates the continued export of adipokines from adipose tissues. Heparan sulfates regulate cellular physiology and communication through a sulfation code that ionically interacts with heparan-binding regions on a select set of proteins. Many of these proteins are growth factors and chemokines that regulate tissue function and inflammation. Cells regulate heparan sulfate sulfation through the release of heparanases and sulfatases. It is now possible to tissue engineer vascularized adipose tissues that express heparan sulfate proteoglycans. This makes it possible to use these tissue constructs to study the role of heparan sulfates in the regulation of adipokine production and release. It is possible to regulate the production of heparanases and sulfatases in order to fine-tune experimental studies.

Overcoming functional challenges in autologous and engineered fat grafting trends

Autologous fat grafting offers significant promise for the repair of soft tissue deformities; however, high resorption rates indicate that engineered solutions are required to improve adipose tissue (AT) survival. Advances in material development and biofabrication have laid the foundation for the generation of functional AT constructs; however, a balance needs to be struck between clinically feasible delivery and improved structural integrity of the grafts. A new approach combining the objectives from both the clinical and research communities will assist in developing morphologically and genetically mature AT constructs, with controlled spatial arrangement and increased potential for neovascularization. In a rapidly progressing field, this review addresses research in both the preclinical and bioengineering domains and assesses their ability to resolve functional challenges.

Oxidized starch cross-linked porous collagen-based hydrogel for spontaneous agglomeration growth of adipose-derived stem cells

Many strategies have been employed to artificially reconstruct adipose tissue in tissue engineering. The functionalization and survival of reconstructed adipose tissue depend on sufficient angiogenesis. Notably, agglomeration growth of adipose-derived stem cells (ASCs) is beneficial to promoting angiogenesis. Herein, we present a porous collagen-based hydrogel for spontaneous agglomeration growth of ASCs to promote angiogenesis. Oxidized starch with different oxidation degree was prepared and used to cross-link collagen to fabricate the porous hydrogel. The gelation time and pore size of hydrogels can be controlled by adjusting the oxidation degree of starch. Crosslinking enhances the mechanical properties, inhibits the swelling and biodegradation of the hydrogels. The hydrogels possess good blood compatibility and cytocompatibility. Significantly, ASCs tended to adhere to the hydrogels and spontaneously grew into spheres along with time. Effective expression of vascular endothelial growth and fibroblast growth factors were observed. Overall, the hydrogels have application prospects in vascularized adipose tissue engineering.

In vitro tissue-engineered adipose constructs for modeling disease

BACKGROUND

Adipose tissue is a vital tissue in mammals that functions to insulate our bodies, regulate our internal thermostat, protect our organs, store energy (and burn energy, in the case of beige and brown fat), and provide endocrine signals to other organs in the body. Tissue engineering of adipose and other soft tissues may prove essential for people who have lost this tissue from trauma or disease.

MAIN TEXT

In this review, we discuss the applications of tissue-engineered adipose tissue specifically for disease modeling applications. We provide a basic background to adipose depots and describe three-dimensional (3D) in vitro adipose models for obesity, diabetes, and cancer research applications.

CONCLUSIONS

The approaches to engineering 3D adipose models are diverse in terms of scaffold type (hydrogel-based, silk-based and scaffold-free), species of origin (H. sapiens and M. musculus) and cell types used, which allows researchers to choose a model that best fits their application, whether it is optimization of adipocyte differentiation or studying the interaction of adipocytes and other cell types like endothelial cells. In vitro 3D adipose tissue models support discoveries into the mechanisms of adipose-related diseases and thus support the development of novel anti-cancer or anti-obesity/diabetes therapies.

Linoleic acid supplementation of cell culture media influences the phospholipid and lipid profiles of human reconstructed adipose tissue

Reconstructed human adipose tissues represent novel tools available to perform in vitro pharmaco-toxicological studies. We used adipose-derived human stromal/stem cells to reconstruct, using tissue engineering techniques, such an adipose tridimensional model. To determine to what extent the in vitro model is representative of its native counterpart, adipogenic differentiation, triglycerides accumulation and phospholipids profiles were analysed. Ingenuity Pathway Analysis software revealed pathways enriched with differentially-expressed genes between native and reconstructed human adipose tissues. Interestingly, genes related to fatty acid metabolism were downregulated in vitro, which could be explained in part by the insufficient amount of essential fatty acids provided by the fetal calf serum used for the culture. Indeed, the lipid profile of the reconstructed human adipose tissues indicated a particular lack of linoleic acid, which could interfere with physiological cell processes such as membrane trafficking, signaling and inflammatory responses. Supplementation in the culture medium was able to influence the lipid profile of the reconstructed human adipose tissues. This study demonstrates the possibility to directly modulate the phospholipid profile of reconstructed human adipose tissues. This reinforces its use as a relevant physiological or pathological model for further pharmacological and metabolic studies of human adipose tissue functions.

Comparing the use of differentiated adipose-derived stem cells and mature adipocytes to model adipose tissue in vitro

In vitro models of human adipose tissue may serve as beneficial alternatives to animal models to study basic biological processes, identify new drug targets, and as soft tissue implants. With this approach, we aimed to evaluate adipose-derived stem cells (ASC) and mature adipocytes (MA) comparatively for the application in the in vitro setup of adipose tissue constructs to imitate native adipose tissue physiology. We used human primary MAs and human ASCs, differentiated for 14 days, and encapsulated them in collagen type I hydrogels to build up a three-dimensional (3D) adipose tissue model. The maintenance of the models was analyzed after seven days based on a viability staining. Further, the expression of the adipocyte specific protein perilipin A and the release of leptin and glycerol were evaluated. Gene transcription profiles of models based on dASCs and MAs were analyzed with regard to native adipose tissue. Compared to MAs, dASCs showed an immature differentiation state. Further, gene transcription of MAs suggests a behavior closer to native tissue in terms of angiogenesis, which supports MAs as preferred cell type. In contrast to native adipose tissue, genes of de novo lipogenesis and tissue remodeling were upregulated in the in vitro attempts.

Isolation and Culture of Human Dermal Microvascular Endothelial Cells

Primary endothelial cells are needed for angiogenesis studies, and more particularly in the field of tissue engineering, to engineer pre-vascularized tissues. Investigations often use human umbilical vein endothelial cells due to their extensive characterization, but also because they are easy to obtain and isolate. An alternative is the use of human dermal microvascular endothelial cells, more representative of adult skin angiogenesis and vascularization processes. This chapter presents a detailed methodology to isolate and culture microvascular endothelial cells from skin biopsies based on enzymatic digestion and mechanical extraction.

Short-term post-implantation dynamics of in vitro engineered human microvascularized adipose tissues

Engineered adipose tissues are developed for their use as substitutes for tissue replacement in reconstructive surgery. To ensure a timely perfusion of the grafted substitutes, different strategies can be used such as the incorporation of an endothelial component. In this study, we engineered human adipose tissue substitutes comprising of functional adipocytes as well as a natural extracellular matrix using the self-assembly approach, without the use of exogenous scaffolding elements. Human microvascular endothelial cells (hMVECs) were incorporated during tissue production in vitro and we hypothesized that their presence would favor the early connection with the host vascular network translating into functional enhancement after implantation into nude mice in comparison to the substitutes that were not enriched in hMVECs. In vitro, no significant differences were observed between the substitutes in terms of histological aspects. After implantation, both groups presented numerous adipocytes and an abundant matrix in addition to the presence of host capillaries within the grafts. The substitutes thickness and volume were not significantly different between groups over the short-term time course of 14 days (d). For the microvascularized adipose tissues, human CD31 staining revealed a human capillary network connecting with the host microvasculature as early as 3 d after grafting. The detection of murine red blood cells within human CD31+ structures confirmed the functionality of the human capillary network. By analyzing the extent of the global vascularization achieved, a tendency towards increased total capillary network surface and volume was revealed for prevascularized tissues over 14 d. Therefore, applying this strategy on thicker reconstructed adipose tissues with rate-limiting oxygen diffusion might procure added benefits and prove useful to provide voluminous substitutes for patients suffering from adipose tissue loss or defects.

Biomimetic Tissue-Engineered Bone Substitutes for Maxillofacial and Craniofacial Repair: The Potential of Cell Sheet Technologies

Maxillofacial defects are complex lesions stemming from various etiologies: accidental, congenital, pathological, or surgical. A bone graft may be required when the normal regenerative capacity of the bone is exceeded or insufficient. Surgeons have many options available for bone grafting including the "gold standard" autologous bone graft. However, this approach is not without drawbacks such as the morbidity associated with harvesting bone from a donor site, pain, infection, or a poor quantity and quality of bone in some patient populations. This review discusses the various bone graft substitutes used for maxillofacial and craniofacial repair: allografts, xenografts, synthetic biomaterials, and tissue-engineered substitutes. A brief overview of bone tissue engineering evolution including the use of mesenchymal stem cells is exposed, highlighting the first clinical applications of adipose-derived stem/stromal cells in craniofacial reconstruction. The importance of prevascularization strategies for bone tissue engineering is also discussed, with an emphasis on recent work describing substitutes produced using cell sheet-based technologies, including the use of thermo-responsive plates and the self-assembly approach of tissue engineering. Indeed, considering their entirely cell-based design, these natural bone-like substitutes have the potential to closely mimic the osteogenicity, osteoconductivity, osteoinduction, and osseointegration properties of autogenous bone for maxillofacial and craniofacial reconstruction.

High Definition Confocal Imaging Modalities for the Characterization of Tissue-Engineered Substitutes

Optimal imaging methods are necessary in order to perform a detailed characterization of thick tissue samples from either native or engineered tissues. Tissue-engineered substitutes are featuring increasing complexity including multiple cell types and capillary-like networks. Therefore, technical approaches allowing the visualization of the inner structural organization and cellular composition of tissues are needed. This chapter describes an optical clearing technique which facilitates the detailed characterization of whole-mount samples from skin and adipose tissues (ex vivo tissues and in vitro tissue-engineered substitutes) when combined with spectral confocal microscopy and quantitative analysis on image renderings.

Dorsal skinfold chamber models in mice

Background/purpose: The use of dorsal skinfold chamber models has substantially improved the understanding of micro-vascularisation in pathophysiology over the last eight decades. It allows in vivo pathophysiological studies of vascularisation over a continuous period of time. The dorsal skinfold chamber is an attractive technique for monitoring the vascularisation of autologous or allogenic transplants, wound healing, tumorigenesis and compatibility of biomaterial implants. To further reduce the animals’ discomfort while carrying the dorsal skinfold chamber, we developed a smaller chamber (the Leipzig Dorsal Skinfold Chamber) and summarized the commercial available chamber models. In addition we compared our model to the common chamber.

Methods: The Leipzig Dorsal Skinfold Chamber was applied to 66 C57Bl/6 female mice with a mean weight of 22 g. Angiogenesis within the dorsal skinfold chamber was evaluated after injection of fluorescein isothiocyanate dextran with an Axio Scope microscope. The mean vessel density within the dorsal skinfold chamber was assessed over a period of 21 days at five different time points. The gained data were compared to previous results using a bigger and heavier dorsal skinfold model in mice. A PubMed and a patent search were performed and all papers related to “dorsal skinfold chamber” from 1^st of January 2006 to 31^st of December 2015 were evaluated regarding the dorsal skinfold chamber models and their technical improvements. The main models are described and compared to our titanium Leipzig Dorsal Skinfold Chamber model.

Results: The Leipzig Dorsal Skinfold Chamber fulfils all requirements of continuous in vivo models known from previous chamber models while reducing irritation to the mice. Five different chamber models have been identified showing substantial regional diversity. The newly elaborated titanium dorsal skinfold chamber may replace the pre-existing titanium chamber model used in Germany so far, as it is smaller and lighter than the former ones. However, the new chamber does not reach the advantages of already existing chamber models used in Asia and the US, which are smaller and lighter.

Conclusion: Elaborating a smaller and lighter dorsal skinfold chamber allows research studies on smaller animals and reduces the animals’ discomfort while carrying the chamber. Greater research exchange should be done to spread the use of smaller and lighter chamber models.

A Cell-Based Self-Assembly Approach for the Production of Human Osseous Tissues from Adipose-Derived Stromal/Stem Cells

Achieving optimal bone defect repair is a clinical challenge driving intensive research in the field of bone tissue engineering. Many strategies focus on seeding graft materials with progenitor cells prior to in vivo implantation. Given the benefits of closely mimicking tissue structure and function with natural materials, the authors hypothesize that under specific culture conditions, human adipose-derived stem/stromal cells (hASCs) can solely be used to engineer human reconstructed osseous tissues (hROTs) by undergoing osteoblastic differentiation with concomitant extracellular matrix production and mineralization. Therefore, the authors are developing a self-assembly methodology allowing the production of such osseous tissues. Three-dimensional (3D) tissues reconstructed from osteogenically-induced cell sheets contain abundant collagen type I and are 2.7-fold less contractile compared to non-osteogenically induced tissues. In particular, hROT differentiation and mineralization is reflected by a greater amount of homogenously distributed alkaline phosphatase, as well as higher calcium-containing hydroxyapatite (P < 0.0001) and osteocalcin (P < 0.0001) levels compared to non-induced tissues. Taken together, these findings show that hASC-driven tissue engineering leads to hROTs that demonstrate structural and functional characteristics similar to native osseous tissue. These highly biomimetic human osseous tissues will advantageously serve as a platform for molecular studies as well as for future therapeutic in vivo translation.

Adipose-derived stem cell differentiation as a basic tool for vascularized adipose tissue engineering

The development of in vitro adipose tissue constructs is highly desired to cope with the increased demand for substitutes to replace damaged soft tissue after high graded burns, deformities or tumor removal. To achieve clinically relevant dimensions, vascularization of soft tissue constructs becomes inevitable but still poses a challenge. Adipose-derived stem cells (ASCs) represent a promising cell source for the setup of vascularized fatty tissue constructs as they can be differentiated into adipocytes and endothelial cells in vitro and are thereby available in sufficiently high cell numbers. This review summarizes the currently known characteristics of ASCs and achievements in adipogenic and endothelial differentiation in vitro. Further, the interdependency of adipogenesis and angiogenesis based on the crosstalk of endothelial cells, stem cells and adipocytes is addressed at the molecular level. Finally, achievements and limitations of current co-culture conditions for the construction of vascularized adipose tissue are evaluated.

Impact of TNF and IL-1β on capillary networks within engineered human adipose tissues

Inflammatory cytokines lead to capillary network disorganization and secreted factor modulation within human microvascularized engineered adipose tissues.

Prevascularization in tissue engineering: Current concepts and future directions

The survival of engineered tissue constructs during the initial phase after their implantation depends on the rapid development of an adequate vascularization. This, in turn, is a major prerequisite for the constructs' long-term function. 'Prevascularization' has emerged as a promising concept in tissue engineering, aiming at the generation of a preformed microvasculature in tissue constructs prior to their implantation. This should shorten the time period during which the constructs are avascular and suffer hypoxic conditions. Herein, we provide an overview of current strategies for the generation of preformed microvascular networks within tissue constructs. In vitro approaches use cell seeding, spheroid formation or cell sheet technologies. In situ approaches use the body as a natural bioreactor to induce vascularization by angiogenic ingrowth or flap and arteriovenous (AV)-loop techniques. In future, these strategies may be supplemented by the transplantation of adipose tissue-derived microvascular fragments or the in vitro generation of highly organized microvascular networks by means of sophisticated microscale technologies and microfluidic systems. The further advancement of these prevascularization concepts and their adaptation to individual therapeutic interventions will markedly contribute to a broad implementation of tissue engineering applications into clinical practice.

Oxidative activity of 17β-hydroxysteroid dehydrogenase on testosterone in male abdominal adipose tissues and cellular localization of 17β-HSD type 2

Testosterone can be converted into androstenedione (4-dione) by 17β-hydroxysteroid dehydrogenase (HSD) activity likely performed by 17β-HSD type 2. Our objective was to evaluate the rate of testosterone conversion to 4-dione as well as expression and localization of 17β-HSD type 2 in omental (OM) vs. subcutaneous (SC) adipose tissues of men. Formation of 4-dione from testosterone was significantly higher in homogenates (p ≤ 0.001) and explants (p ≤ 0.01) of OM than SC tissue. Microscopy analyses and biochemical assays in cell fractions localized the enzyme in the vasculature/endothelial cells of adipose tissues. Conversion of testosterone to 4-dione was weakly detected in most OM and/or SC preadipocyte cultures. Positive correlations were found between 17β-HSD type 2 activity in whole tissue and BMI or SC adipocyte diameter. We conclude that conversion of testosterone to 4-dione detected in abdominal adipose tissue is caused by 17β-HSD type 2 which is localized in the vasculature of the adipose compartment.

Characterization of In Vitro Engineered Human Adipose Tissues: Relevant Adipokine Secretion and Impact of TNF-α

Representative modelling of human adipose tissue functions is central to metabolic research. Tridimensional models able to recreate human adipogenesis in a physiological tissue-like context in vitro are still scarce. We describe the engineering of white adipose tissues reconstructed from their cultured adipose-derived stromal precursor cells. We hypothesize that these reconstructed tissues can recapitulate key functions of AT under basal and pro-inflammatory conditions. These tissues, featuring human adipocytes surrounded by stroma, were stable and metabolically active in long-term cultures (at least 11 weeks). Secretion of major adipokines and growth factors by the reconstructed tissues was determined and compared to media conditioned by human native fat explants. Interestingly, the secretory profiles of the reconstructed adipose tissues indicated an abundant production of leptin, PAI-1 and angiopoietin-1 proteins, while higher HGF levels were detected for the human fat explants. We next demonstrated the responsiveness of the tissues to the pro-inflammatory stimulus TNF-α, as reflected by modulation of MCP-1, NGF and HGF secretion, while VEGF and leptin protein expression did not vary. TNF-α exposure induced changes in gene expression for adipocyte metabolism-associated mRNAs such as SLC2A4, FASN and LIPE, as well as for genes implicated in NF-κB activation. Finally, this model was customized to feature adipocytes representative of progressive stages of differentiation, thereby allowing investigations using newly differentiated or more mature adipocytes. In conclusion, we produced tridimensional tissues engineered in vitro that are able to recapitulate key characteristics of subcutaneous white adipose tissue. These tissues are produced from human cells and their neo-synthesized matrix elements without exogenous or synthetic biomaterials. Therefore, they represent unique tools to investigate the effects of pharmacologically active products on human stromal cells, extracellular matrix and differentiated adipocytes, in addition to compounds modulating adipogenesis from precursor cells.

Understanding the effects of mature adipocytes and endothelial cells on fatty acid metabolism and vascular tone in physiological fatty tissue for vascularized adipose tissue engineering

Engineering of large vascularized adipose tissue constructs is still a challenge for the treatment of extensive high-graded burns or the replacement of tissue after tumor removal. Communication between mature adipocytes and endothelial cells is important for homeostasis and the maintenance of adipose tissue mass but, to date, is mainly neglected in tissue engineering strategies. Thus, new co-culture strategies are needed to integrate adipocytes and endothelial cells successfully into a functional construct. This review focuses on the cross-talk of mature adipocytes and endothelial cells and considers their influence on fatty acid metabolism and vascular tone. In addition, the properties and challenges with regard to these two cell types for vascularized tissue engineering are highlighted.

Human adipose-derived stromal cells for the production of completely autologous self-assembled tissue-engineered vascular substitutes

There is a clinical need for small-diameter vascular substitutes, notably for coronary and peripheral artery bypass procedures since these surgeries are limited by the availability of grafting material. This study reports the characterization of a novel autologous tissue-engineered vascular substitute (TEVS) produced in 10weeks exclusively from human adipose-derived stromal cells (ASC) self-assembly, and its comparison to an established model made from dermal fibroblasts (DF). Briefly, ASC and DF were cultured with ascorbate to form cell sheets subsequently rolled around a mandrel. These TEVS were further cultured as a maturation period before undergoing mechanical testing, histological analyses and endothelialization. No significant differences were measured in burst pressure, suture strength, failure load, elastic modulus and failure strain according to the cell type used to produce the TEVS. Indeed, ASC- and DF-TEVS both displayed burst pressures well above maximal physiological blood pressure. However, ASC-TEVS were 1.40-fold more compliant than DF-TEVS. The structural matrix, comprising collagens type I and III, fibronectin and elastin, was very similar in all TEVS although histological analysis showed a wavier and less dense collagen matrix in ASC-TEVS. This difference in collagen organization could explain their higher compliance. Finally, human umbilical vein endothelial cells (HUVEC) successfully formed a confluent endothelium on ASC and DF cell sheets, as well as inside ASC-TEVS. Our results demonstrated that ASC are an alternative cell source for the production of TEVS displaying good mechanical properties and appropriate endothelialization.

Opportunities and challenges in three-dimensional brown adipogenesis of stem cells

The formation of brown adipose tissue (BAT) via brown adipogenesis has become a notable process due to its ability to expend energy as heat with implications in the treatment of metabolic disorders and obesity. With the advent of complexity within white adipose tissue (WAT) along with inducible brown adipocytes (also known as brite and beige), there has been a surge in deciphering adipocyte biology as well as in vivo adipogenic microenvironments. A therapeutic outcome would benefit from understanding early events in brown adipogenesis, which can be accomplished by studying cellular differentiation. Pluripotent stem cells are an efficient model for differentiation and have been directed towards both white adipogenic and brown adipogenic lineages. The stem cell microenvironment greatly contributes to terminal cell fate and as such, has been mimicked extensively by various polymers including those that can form 3D hydrogel constructs capable of biochemical and/or mechanical modifications and modulations. Using bioengineering approaches towards the creation of 3D cell culture arrangements is more beneficial than traditional 2D culture in that it better recapitulates the native tissue biochemically and biomechanically. In addition, such an approach could potentially protect the tissue formed from necrosis and allow for more efficient implantation. In this review, we highlight the promise of brown adipocytes with a focus on brown adipogenic differentiation of stem cells using bioengineering approaches, along with potential challenges and opportunities that arise when considering the energy expenditure of BAT for prospective therapeutics.