1
|
Évora AS, Zhang Z, Johnson SA, Adams MJ. The effects of hydration on the topographical and mechanical properties of corneocytes. J Mech Behav Biomed Mater 2024; 150:106296. [PMID: 38141363 DOI: 10.1016/j.jmbbm.2023.106296] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/16/2023] [Revised: 08/04/2023] [Accepted: 12/02/2023] [Indexed: 12/25/2023]
Abstract
It is well established that the biomechanical properties of the Stratum Corneum (SC) are influenced by both moisture-induced plasticization and the lipid content. This study employs Atomic Force Microscopy to investigate how hydration affects the surface topographical and elasto-viscoplastic characteristics of corneocytes from two anatomical sites. Volar forearm cells underwent swelling when immersed in water with a 50% increase in thickness and volume. Similarly, medial heel cells demonstrated significant swelling in volume, accompanied by increased cell area and reduced cell roughness. Furthermore, as the water activity was increased, they exhibited enhanced compliance, leading to a decreased Young's modulus, hardness, and relaxation times. Moreover, the swollen cells also displayed a greater tolerance to strain before experiencing permanent deformation. Despite the greater predominance of immature cornified envelopes in plantar skin, the comparable Young's modulus of medial heel and forearm corneocytes suggests that cell stiffness primarily relies on the keratin matrix rather than on the cornified envelope. The Young's moduli of the cells in distilled water are similar to those reported for the SC, which suggests that the corneodesmosomes and intercellular lamellae lipids junctions that connect the corneocytes are able to accommodate the mechanical deformations of the SC.
Collapse
Affiliation(s)
- Ana S Évora
- School of Chemical Engineering, University of Birmingham, Birmingham, UK.
| | - Zhibing Zhang
- School of Chemical Engineering, University of Birmingham, Birmingham, UK.
| | - Simon A Johnson
- School of Chemical Engineering, University of Birmingham, Birmingham, UK.
| | - Michael J Adams
- School of Chemical Engineering, University of Birmingham, Birmingham, UK.
| |
Collapse
|
2
|
Diosa JG, Moreno R, Chica EL, Buganza-Tepole A. Impact of Indenter Size and Microrelief Anisotropy on the Tribological Behavior of Human Skin. J Biomech Eng 2023; 145:101008. [PMID: 37382599 DOI: 10.1115/1.4062848] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/03/2023] [Accepted: 06/21/2023] [Indexed: 06/30/2023]
Abstract
Everyday, we interact with screens, sensors, and many other devices through contact with the skin. Experimental efforts have increased our knowledge of skin tribology but are challenged by the fact that skin has a complex structure, undergoes finite deformations, has nonlinear material response, and has properties that vary with anatomical location, age, sex, and environmental conditions. Computational models are powerful tools to dissect the individual contribution of these variables to the overall frictional response. Here, we present a three-dimensional high-fidelity multilayer skin computational model including a detailed surface topography or skin microrelief. Four variables are explored: local coefficient of friction (COF), indenter size, mechanical properties of the stratum corneum, and displacement direction. The results indicate that the global COF depends nonlinearly on the local COF, implying a role for skin deformation on the friction response. The global COF is also influenced by the ratio of the indenter size to the microrelief features, with larger indenters smoothing out the role of skin topography. Changes in stiffness of the uppermost layer of skin associated with humidity have a substantial effect on both the contact area and the reaction forces, but the overall changes in the COF are small. Finally, for the microrelief tested, the response can be considered isotropic. We anticipate that this model and results will enable the design of materials and devices for a desired interaction against skin.
Collapse
Affiliation(s)
- Juan G Diosa
- Department of Biomedical Engineering, Universidad CES, Medellín 050021, Colombia; Mechanical Engineering Department, Universidad de Antioquia, Medellín 050010, Colombia
| | - Ricardo Moreno
- Mechanical Engineering Department, Universidad de Antioquia, Medellín 050010, Colombia
| | - Edwin L Chica
- Mechanical Engineering Department, Universidad de Antioquia, Medellín 050010, Colombia
| | - Adrian Buganza-Tepole
- School of Mechanical Engineering, Weldon School of Biomedical Engineering, Purdue University, West Lafayette, IN 47907
| |
Collapse
|
3
|
Wang J, Lu Z, Cai R, Zheng H, Yu J, Zhang Y, Gu Z. Microneedle-based transdermal detection and sensing devices. LAB ON A CHIP 2023; 23:869-887. [PMID: 36629050 DOI: 10.1039/d2lc00790h] [Citation(s) in RCA: 20] [Impact Index Per Article: 20.0] [Reference Citation Analysis] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/17/2023]
Abstract
Microneedles have been expected for the construction of next-generation biosensors towards personalization, digitization, and intellectualization due to their metrics of minimal invasiveness, high integration, and favorable biocompatibility. Herein, an overview of state-of-the-art microneedle-based detection and sensing systems is presented. First, the designs of microneedle devices based on extraction mechanisms are concluded, corresponding to different geometries and materials of microneedles. Second, the targets of equipment-assisted microneedle detections are summarized, as well as the objective significance, revealing the current performance and potential scenarios of these microneedles. Third, the trend towards highly integrated sensors is elaborated by emphasizing the sensing principles (colorimetric, fluorometric and electronic manner). Finally, the key challenges to be tackled and the perspectives on future development are discussed.
Collapse
Affiliation(s)
- Junxia Wang
- Zhejiang Provincial Key Laboratory for Advanced Drug Delivery Systems, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, 310058, China.
| | - Ziyi Lu
- Zhejiang Provincial Key Laboratory for Advanced Drug Delivery Systems, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, 310058, China.
- Department of General Surgery, Sir Run Run Shaw Hospital, School of Medicine, Zhejiang University, Hangzhou, 310016, China
| | - Ruisi Cai
- Zhejiang Provincial Key Laboratory for Advanced Drug Delivery Systems, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, 310058, China.
| | - Hanqi Zheng
- Zhejiang Provincial Key Laboratory for Advanced Drug Delivery Systems, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, 310058, China.
| | - Jicheng Yu
- Zhejiang Provincial Key Laboratory for Advanced Drug Delivery Systems, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, 310058, China.
- Department of General Surgery, Sir Run Run Shaw Hospital, School of Medicine, Zhejiang University, Hangzhou, 310016, China
- Jinhua Institute of Zhejiang University, Jinhua, 321299, China
- Liangzhu Laboratory, Zhejiang University Medical Center, Hangzhou, 311121, China
| | - Yuqi Zhang
- Zhejiang Provincial Key Laboratory for Advanced Drug Delivery Systems, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, 310058, China.
- Department of Burns and Wound Center, Second Affiliated Hospital, School of Medicine, Zhejiang University, Hangzhou, 310009, China
| | - Zhen Gu
- Zhejiang Provincial Key Laboratory for Advanced Drug Delivery Systems, College of Pharmaceutical Sciences, Zhejiang University, Hangzhou, 310058, China.
- Department of General Surgery, Sir Run Run Shaw Hospital, School of Medicine, Zhejiang University, Hangzhou, 310016, China
- Jinhua Institute of Zhejiang University, Jinhua, 321299, China
- Liangzhu Laboratory, Zhejiang University Medical Center, Hangzhou, 311121, China
- MOE Key Laboratory of Macromolecular Synthesis and Functionalization, Department of Polymer Science and Engineering, Zhejiang University, Hangzhou, 310027, China
| |
Collapse
|
4
|
Santoprete R, Hourblin V, Foucher A, Dufour O, Bernard D, Domanov Y, Querleux B, Potter A. Reduction of wrinkles: From a computational hypothesis to a clinical, instrumental, and biological proof. Skin Res Technol 2023; 29:e13267. [PMID: 36973988 PMCID: PMC10155799 DOI: 10.1111/srt.13267] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/14/2022] [Accepted: 12/06/2022] [Indexed: 03/09/2023]
Abstract
BACKGROUND Facial wrinkles are clear markers of the aging process, being chronological, photo-induced, or reflecting repetitive facial expressions. The aim of this study is to provide new insights into the biophysical and biological mechanisms involved in the formation, prevention, or elimination of the expression wrinkles. MATERIALS AND METHODS We use a computational model to get a better understanding of the wrinkle mechanical behavior and evolution after skin softening and suggesting a possible antiaging mechanism. Then, we provide a clinical demonstration of the anti-wrinkle effect of a long-term application of a 20% glycerol in a moisturizer formula (GBM) versus its vehicle on crow's feet. Skin hydration, elasticity, and wrinkles visibility were evaluated by a combination of clinical and instrumental in vivo data, inverse finite element analysis, and proteomic data. RESULTS The computational model shows a predominantly compressive stress beneath the wrinkle and its significant decrease by the softening of stratum corneum. The associated clinical study confirmed a significant increase of skin hydration and elasticity as well as a decrease of wrinkle visibility after 2 and 4 months as application for both formulas; this effect being stronger for GBM. A softening effect on stratum corneum and dermis was also observed for the GBM. Furthermore, proteomic data revealed an effect of upregulation of four proteins associated with desquamation, cell-glycan extracellular interactions, and protein glycation/oxidation, functions related to the tissue mechanics and adhesion. CONCLUSIONS We provide an in vivo demonstration of the anti-ageing benefit of glycerol at high dose (20%) reflected by a cumulative skin surface softening effect. The use of high moisturizing potent formulations should bring additional performance to other conventional moisturizing formulations.
Collapse
Affiliation(s)
| | | | - Aude Foucher
- L'Oréal Research & InnovationAulnay‐sous‐BoisFrance
| | | | | | | | | | - Anne Potter
- L'Oréal Research & InnovationAulnay‐sous‐BoisFrance
| |
Collapse
|
5
|
Dwivedi KK, Lakhani P, Sihota P, Tikoo K, Kumar S, Kumar N. The multiscale characterization and constitutive modeling of healthy and type 2 diabetes mellitus Sprague Dawley rat skin. Acta Biomater 2023; 158:324-346. [PMID: 36565785 DOI: 10.1016/j.actbio.2022.12.037] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/20/2022] [Revised: 11/26/2022] [Accepted: 12/15/2022] [Indexed: 12/24/2022]
Abstract
In type 2 diabetes mellitus (T2DM), elevated glucose level impairs the biochemistry of the skin which may result in alteration of its mechanical and structural properties. The several aspects of structural and mechanical changes in skin due to T2DM remain poorly understood. To fill these research gaps, we developed a non-obese T2DM rat (Sprague Dawley (SD)) model for investigating the effect of T2DM on the in vivo strain stress state, mechanical and structural properties of skin. In vivo strain and mechanical anisotropy of healthy and T2DM skin were measured using the digital imaging correlation (DIC) technique and DIC coupled bulge experiment, respectively. Fluorescence microscopy and histology were used to assess the collagen and elastin fibers microstructure whereas nanoscale structure was captured through atomic force microscopy (AFM). Based on the microstructural observations, skin was modeled as a multilayer membrane where in and out of plane distribution of collagen fibers and planar distribution of elastin fibers were cast in constitutive model. Further, the state of in vivo stresses of healthy and T2DM were measured using model parameters and in vivo strain in the constitutive model. The results showed that T2DM causes significant loss in in vivo stresses (p < 0.01) and increase in anisotropy (p < 0.001) of skin. These changes were found in good correlation with T2DM associated alteration in skin microstructure. Statistical analysis emphasized that increase in blood glucose concentration (HbA1c) was the main cause of impaired biomechanical properties of skin. The presented data in this study can help to understand the skin pathology and to simulate the skin related clinical procedures. STATEMENT OF SIGNIFICANCE: Our study is significant as it presents findings related to the effect of T2DM on the physiologic stress strain, structural and mechanical response of SD rat skin. In this study, we developed a non-obese T2DM SD rat model which mimics the phenotype of Asian type 2 diabetics (non-obese). Several structural and mechanical characterization techniques were explored for multiscale characterization of healthy and T2DM skin. Further, based on microstructural information, we presented the constitutive models that incorporate the real microstructure of skin. The presented results can be helpful to simulate the realistic mechanical response of skin during various clinical trials.
Collapse
Affiliation(s)
- Krashn Kr Dwivedi
- Department of Biomedical Engineering, Indian institute of Technology Ropar, India
| | - Piyush Lakhani
- Department of Mechanical Engineering, Indian institute of Technology Ropar, India
| | - Praveer Sihota
- Department of Mechanical Engineering, Indian institute of Technology Ropar, India
| | - Kulbhushan Tikoo
- Department of Pharmacology and Toxicology, National Institute of Pharmaceutical Education and Research, Mohali, India
| | - Sachin Kumar
- Department of Mechanical Engineering, Indian institute of Technology Ropar, India.
| | - Navin Kumar
- Department of Biomedical Engineering, Indian institute of Technology Ropar, India; Department of Mechanical Engineering, Indian institute of Technology Ropar, India.
| |
Collapse
|
6
|
Cheng S, Lou Z, Zhang L, Guo H, Wang Z, Guo C, Fukuda K, Ma S, Wang G, Someya T, Cheng HM, Xu X. Ultrathin Hydrogel Films toward Breathable Skin-Integrated Electronics. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2023; 35:e2206793. [PMID: 36267034 DOI: 10.1002/adma.202206793] [Citation(s) in RCA: 46] [Impact Index Per Article: 46.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 07/26/2022] [Revised: 09/22/2022] [Indexed: 06/16/2023]
Abstract
On-skin electronics that offer revolutionary capabilities in personalized diagnosis, therapeutics, and human-machine interfaces require seamless integration between the skin and electronics. A common question remains whether an ideal interface can be introduced to directly bridge thin-film electronics with the soft skin, allowing the skin to breathe freely and the skin-integrated electronics to function stably. Here, an ever-thinnest hydrogel is reported that is compliant to the glyphic lines and subtle minutiae on the skin without forming air gaps, produced by a facile cold-lamination method. The hydrogels exhibit high water-vapor permeability, allowing nearly unimpeded transepidermal water loss and free breathing of the skin underneath. Hydrogel-interfaced flexible (opto)electronics without causing skin irritation or accelerated device performance deterioration are demonstrated. The long-term applicability is recorded for over one week. With combined features of extreme mechanical compliance, high permeability, and biocompatibility, the ultrathin hydrogel interface promotes the general applicability of skin-integrated electronics.
Collapse
Affiliation(s)
- Simin Cheng
- Shenzhen International Graduate School and Tsinghua-Berkeley Shenzhen Institute, Tsinghua University, Shenzhen, 518055, China
| | - Zirui Lou
- Shenzhen International Graduate School and Tsinghua-Berkeley Shenzhen Institute, Tsinghua University, Shenzhen, 518055, China
| | - Lan Zhang
- College of Food Science and Engineering, Ocean University of China, Qingdao, 266003, China
| | - Haotian Guo
- Shenzhen International Graduate School and Tsinghua-Berkeley Shenzhen Institute, Tsinghua University, Shenzhen, 518055, China
| | - Zitian Wang
- Shenzhen International Graduate School and Tsinghua-Berkeley Shenzhen Institute, Tsinghua University, Shenzhen, 518055, China
| | - Chuanfei Guo
- Department of Materials Science and Engineering, Southern University of Science and Technology, Shenzhen, 518055, China
| | - Kenjiro Fukuda
- Center for Emergent Matter Science and Thin-Film Device Laboratory, RIKEN, Saitama, 351-0198, Japan
| | - Shaohua Ma
- Shenzhen International Graduate School and Tsinghua-Berkeley Shenzhen Institute, Tsinghua University, Shenzhen, 518055, China
| | - Guoqing Wang
- College of Food Science and Engineering, Ocean University of China, Qingdao, 266003, China
| | - Takao Someya
- Center for Emergent Matter Science and Thin-Film Device Laboratory, RIKEN, Saitama, 351-0198, Japan
- Electrical and Electronic Engineering and Information Systems, The University of Tokyo, Tokyo, 113-8656, Japan
| | - Hui-Ming Cheng
- Faculty of Materials Science and Engineering, Institute of Technology for Carbon Neutrality, Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences, Shenzhen, 518055, China
- Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, Shenyang, 110016, China
| | - Xiaomin Xu
- Shenzhen International Graduate School and Tsinghua-Berkeley Shenzhen Institute, Tsinghua University, Shenzhen, 518055, China
| |
Collapse
|
7
|
Mechanisms and Implications of Bacterial Invasion across the Human Skin Barrier. Microbiol Spectr 2022; 10:e0274421. [PMID: 35532353 PMCID: PMC9241919 DOI: 10.1128/spectrum.02744-21] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022] Open
Abstract
Atopic dermatitis (AD) is associated with a deficiency of skin lipids, increased populations of Staphylococcus aureus in the microbiome, and structural defects in the stratum corneum (SC), the outermost layer of human skin. However, the pathogenesis of AD is ambiguous, as it is unclear whether observed changes are the result of AD or contribute to the pathogenesis of the disease. Previous studies have shown that S. aureus is capable of permeating across isolated human SC tissue when lipids are depleted to levels consistent with AD conditions. In this study, we expand upon this discovery to determine the mechanisms and implications of bacterial penetration into the SC barrier. Specifically, we establish if bacteria are permeating intercellularly or employing a combination of both inter- and intracellular travel. The mechanical implications of bacterial invasion, lipid depletion, and media immersion are also evaluated using a newly developed, physiologically relevant, temperature-controlled drip chamber. Results reveal for the first time that S. aureus can be internalized by corneocytes, indicating transcellular movement through the tissue during permeation, consistent with previous theoretical models. S. aureus also degrades the mechanical integrity of human SC, particularly when the tissue is partially depleted of lipids. These observed mechanical changes are likely the cause of broken or ruptured tissue seen as exudative lesions in AD flares. This work further highlights the necessity of lipids in skin microbial barrier function. IMPORTANCE Millions of people suffer from the chronic inflammatory skin disease atopic dermatitis (AD), whose symptoms are associated with a deficiency of skin lipids that exhibit antimicrobial functions and increased populations of the opportunistic pathogen Staphylococcus aureus. However, the pathogenesis of AD is ambiguous, and it remains unclear if these observed changes are merely the result of AD or contribute to the pathogenesis of the disease. In this article, we demonstrate the necessity of skin lipids in preventing S. aureus from penetrating the outermost barrier of human skin, thereby causing a degradation in tissue integrity. This bacterial permeation into the viable epidermis could act as an inflammatory trigger of the disease. When coupled with delipidated AD tissue conditions, bacterial permeation can also explain increased tissue fragility, potentially causing lesion formation in AD patients that results in further enhancing bacterial permeability across the stratum corneum and the development of chronic conditions.
Collapse
|
8
|
Douglas P. Re-thinking lactation-related nipple pain and damage. WOMEN'S HEALTH (LONDON, ENGLAND) 2022; 18:17455057221087865. [PMID: 35343816 PMCID: PMC8966064 DOI: 10.1177/17455057221087865] [Citation(s) in RCA: 9] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 04/14/2023]
Abstract
Nipple pain is a common reason for premature cessation of breastfeeding. Despite the benefits of breastfeeding for both infant and mother, clinical support for problems such as maternal nipple pain remains a research frontier. Maternal pharmaceutical treatments, and infant surgery and bodywork interventions are commonly recommended for lactation-related nipple pain without evidence of benefit. The pain is frequently attributed to mammary dysbiosis, candidiasis, or infant anatomic anomaly (including to diagnoses of posterior or upper lip-tie, high palate, retrognathia, or subtle cranial nerve abnormalities). Although clinical protocols universally state that improved fit and hold is the mainstay of treatment of nipple pain and wounds, the biomechanical parameters of pain-free fit and hold remain an omitted variable bias in almost all clinical breastfeeding research. This article reviews the research literature concerning aetiology, classification, prevention, and management of lactation-related nipple-areolar complex (NAC) pain and damage. Evolutionary and complex systems perspectives are applied to develop a narrative synthesis of the heterogeneous and interdisciplinary evidence elucidating nipple pain in breastfeeding women. Lactation-related nipple pain is most commonly a symptom of inflammation due to repetitive application of excessive mechanical stretching and deformational forces to nipple epidermis, dermis and stroma during milk removal. Keratinocytes lock together when mechanical forces exceed desmosome yield points, but if mechanical loads continue to increase, desmosomes may rupture, resulting in inflammation and epithelial fracture. Mechanical stretching and deformation forces may cause stromal micro-haemorrhage and inflammation. Although the environment of the skin of the nipple-areolar complex is uniquely conducive to wound healing, it is also uniquely exposed to environmental risks. The two key factors that both prevent and treat nipple pain and inflammation are, first, elimination of conflicting vectors of force during suckling or mechanical milk removal, and second, elimination of overhydration of the epithelium which risks moisture-associated skin damage. There is urgent need for evaluation of evidence-based interventions for the elimination of conflicting intra-oral vectors of force during suckling.
Collapse
Affiliation(s)
- Pamela Douglas
- School of Nursing and Midwifery, Griffith University, Brisbane, QLD, Australia
- General Practice Clinical Unit, The University of Queensland, Brisbane, QLD, Australia
- Possums & Co., Brisbane, QLD, Australia
- Pamela Douglas, c/o Possums & Co., PO Box 5139, Brisbane, West End QLD 4101, Australia.
| |
Collapse
|
9
|
Moniz T, Lima SAC, Reis S. Protocol for the Isolation of Stratum Corneum from Pig Ear Skin: Evaluation of the Trypsin Digestion Conditions. Methods Protoc 2021; 4:mps4040080. [PMID: 34842773 PMCID: PMC8628882 DOI: 10.3390/mps4040080] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/16/2021] [Revised: 11/01/2021] [Accepted: 11/01/2021] [Indexed: 11/22/2022] Open
Abstract
Stratum corneum (SC) represents the outermost layer of the skin, being an effective barrier against the entry of molecules and pathogens. Skin research has given particular focus to SC as it hampers effective drug delivery for cosmetical and therapeutical purposes. Following recommendations to develop alternative models to animals, the SC isolated from skin obtained from medical procedures or from pigs has gained extensive attention. Yet, there is still missing a standard and simple procedure accepted within the scientific community to avoid application of different isolated SC methodologies, a fact that may hamper progress in skin research. Considering this challenge, the present study evaluated different experimental conditions aiming to establish a useful and sustainable solvent-free procedure for the obtention of a realistic SC model. The studied trypsin digestion parameters included concentration, incubation period and temperature. Isolated SC was characterized using histological analysis and calcein’s permeability, after the procedure and during a 6-week storage period. Data recommend trypsin digestion at 4 °C for 20 h as the most effective procedure to isolate SC from pig ear skin. This work contributes to standardize the SC isolation procedure, and to obtain a valuable and reliable SC mimetic model for skin drug development.
Collapse
|
10
|
Chavoshnejad P, Foroughi AH, Dhandapani N, German GK, Razavi MJ. Effect of collagen degradation on the mechanical behavior and wrinkling of skin. Phys Rev E 2021; 104:034406. [PMID: 34654184 DOI: 10.1103/physreve.104.034406] [Citation(s) in RCA: 13] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/22/2021] [Accepted: 08/27/2021] [Indexed: 11/07/2022]
Abstract
Chronological skin aging is a complex process that is controlled by numerous intrinsic and extrinsic factors. One major factor is the gradual degradation of the dermal collagen fiber network. As a step toward understanding the mechanistic importance of dermal tissue in the process of aging, this study employs analytical and multiscale computational models to elucidate the effect of collagen fiber bundle disintegration on the mechanical properties and topography of skin. Here, human skin is modeled as a soft composite with an anisotropic dermal layer. The anisotropy of the tissue is governed by collagen fiber bundles with varying densities, average fiber alignments, and normalized alignment distributions. In all finite element models examined, collagen fiber bundle degradation results in progressive decreases in dermal and full-thickness composite stiffness. This reduction is more profound when collagen bundles align with the compression axis. Aged skin models with low collagen fiber bundle densities under compression exhibit notably smaller critical wrinkling strains and larger critical wavelengths than younger skin models, in agreement with in vivo wrinkling behavior with age. The propensity for skin wrinkling can be directly attributable to the degradation of collagen fiber bundles, a relationship that has previously been assumed but unsubstantiated. While linear-elastic analytical models fail to capture the postbuckling behavior in skin, nonlinear finite element models can predict the complex bifurcations of the compressed skin with different densities of collagen bundles.
Collapse
Affiliation(s)
- Poorya Chavoshnejad
- Department of Mechanical Engineering, Binghamton University, State University of New York, New York 13902, USA
| | - Ali H Foroughi
- Department of Mechanical Engineering, Binghamton University, State University of New York, New York 13902, USA
| | - Niranjana Dhandapani
- Department of Biomedical Engineering, Binghamton University, State University of New York, Binghamton, New York 13902, USA
| | - Guy K German
- Department of Biomedical Engineering, Binghamton University, State University of New York, Binghamton, New York 13902, USA.,Department of Pharmaceutical Sciences, Binghamton University, State University of New York, Binghamton, New York 13902, USA
| | - Mir Jalil Razavi
- Department of Mechanical Engineering, Binghamton University, State University of New York, New York 13902, USA
| |
Collapse
|
11
|
Al-Rekabi Z, Rawlings AV, Lucas RA, Raj N, Clifford CA. Characterizing the nanomechanical properties of microcomedones after treatment with sodium salicylate ex vivo using atomic force microscopy. Int J Cosmet Sci 2021; 43:610-618. [PMID: 34338343 DOI: 10.1111/ics.12729] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/09/2021] [Revised: 06/22/2021] [Accepted: 07/30/2021] [Indexed: 11/28/2022]
Abstract
OBJECTIVE The treatment of acne presents a major clinical and dermatological challenge. Investigating the nanomechanical properties of the microcomedone precursor lesions using atomic force microscopy (AFM) may prove beneficial in understanding their softening, dissolution and prevention. Although the exact biochemical mechanism of NaSal on microcomedones is not fully understood at present, it appears to exhibit a significant exfoliation effect on the skin via corneodesmosome dissolution. METHODS Therefore, to support this exploration, sodium salicylate (NaSal), a common ingredient employed in skin care products, is applied ex vivo to microcomedones,collected by nose strip adhesive tape, and their nanomechanical properties are assessed using AFM. Although the exact biochemical mechanism of NaSal on microcomedones is not fully understood at present, it appears to exhibit a significant exfoliation effect on the skin via corneodesmosome dissolution. RESULTS Herein, our findings demonstrate that when microcomedones are treated with 2% NaSal, samples appeared significantly more compliant ('softer') ((1.3 ± 0.62) MPa) when compared to their pre-treated measurements ((7.2 ± 3.6) MPa; p = 0.038). Furthermore, elastic modulus maps showed that after 2% NaSal treatment, areas in the microcomedone appeared softer and swollen in some, but not in all areas, further proving the valuable impact of 2% NaSal solution in altering the biomechanical properties and morphologies in microcomedones. CONCLUSION Our results are the first of their kind to provide qualitative and quantitative mechanobiological evidence that 2% NaSal decreases the elastic modulus of microcomedones. Therefore, this study provides evidence that NaSal can be beneficial as an active ingredient in topical treatments aimed at targeting microcomedones.
Collapse
Affiliation(s)
- Zeinab Al-Rekabi
- Department of Chemical and Biological Sciences, National Physical Laboratory, Teddington, UK
| | | | | | - Nidhin Raj
- GlaxoSmithKline Consumer Healthcare, Weybridge, UK
| | - Charles A Clifford
- Department of Chemical and Biological Sciences, National Physical Laboratory, Teddington, UK
| |
Collapse
|
12
|
The precision of macroscale mechanical measurements is limited by the inherent structural heterogeneity of human stratum corneum. Acta Biomater 2021; 130:308-316. [PMID: 34087446 DOI: 10.1016/j.actbio.2021.05.035] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/03/2020] [Revised: 05/18/2021] [Accepted: 05/20/2021] [Indexed: 12/18/2022]
Abstract
Biological tissues are structurally heterogenous mosaics at cellular and sub-cellular length scales. Some tissues, like the outermost layer of human skin, or stratum corneum (SC), also exhibit a rich topography of microchannels at larger mesoscopic length scales. Although this is well understood, modern studies continue to characterize the mechanical properties of biological tissues, including the SC, using macroscale techniques that assume these materials are homogenous in structure, thickness, and composition. Macroscale failure testing of SC is commonly associated with large sample to sample variability. We anticipate that microscale heterogeneities play an important role in defining the global mechanical response of the tissue. To evaluate the validity of the prevailing paradigm that macroscopic testing techniques can provide meaningful information about failure in soft heterogenous tissues, the macroscale work of fracture in isolated human SC samples is measured using conventional macroscale testing techniques and compared with the energy cost of creating new crack interfaces at the microscale, measured using a modified traction force microscopy technique. Results show that measured micro- and macroscale energy costs per unit crack path length are highly consistent. However, crack propagation is found to be guided by microscale topographical features in the tissue. This correlation reveals that macroscale mechanical sample to sample variability is caused by notable differences in crack propagation pathways. STATEMENT OF SIGNIFICANCE: Although designed to test homogeneous materials, macroscopic uniaxial tensometry is currently the gold standard for measuring the mechanical properties of biological tissues. All tissues, including human stratum corneum are structurally heterogeneous at the microscale and mechanical measurements are commonly highly variable, even for specimens from the same source. This study explores the fundamental causes of this disparity and evaluates the prevailing paradigm that macroscopic testing techniques can provide meaningful information about failure in soft heterogeneous tissues. Results conclude that the cause of large variability in mechanical work of fracture is due to inherent structural heterogeneities governing crack propagation pathways and altering the total crack length. Structural heterogeneities in tissue therefore limits the precision of macroscale biomechanical testing.
Collapse
|
13
|
Diosa JG, Moreno R, Chica EL, Villarraga JA, Tepole AB. Changes in the three-dimensional microscale topography of human skin with aging impact its mechanical and tribological behavior. PLoS One 2021; 16:e0241533. [PMID: 34242217 PMCID: PMC8270165 DOI: 10.1371/journal.pone.0241533] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/03/2020] [Accepted: 05/11/2021] [Indexed: 11/19/2022] Open
Abstract
Human skin enables interaction with diverse materials every day and at all times. The ability to grasp objects, feel textures, and perceive the environment depends on the mechanical behavior, complex structure, and microscale topography of human skin. At the same time, abrasive interactions, such as sometimes occur with prostheses or textiles, can damage the skin and impair its function. Previous theoretical and computational efforts have shown that skin’s surface topography or microrelief is crucial for its tribological behavior. However, current understanding is limited to adult surface profiles and simplified two-dimensional simulations. Yet, the skin has a rich set of features in three dimensions, and the geometry of skin is known to change with aging. Here we create a numerical model of a dynamic indentation test to elucidate the effect of changes in microscale topography with aging on the skin’s response under indentation and sliding contact with a spherical indenter. We create three different microrelief geometries representative of different ages based on experimental reports from the literature. We perform the indentation and sliding steps, and calculate the normal and tangential forces on the indenter as it moves in three distinct directions based on the characteristic skin lines. The model also evaluates the effect of varying the material parameters. Our results show that the microscale topography of the skin in three dimensions, together with the mechanical behavior of the skin layers, lead to distinctive trends on the stress and strain distribution. The major finding is the increasing role of anisotropy which emerges from the geometric changes seen with aging.
Collapse
Affiliation(s)
- Juan G. Diosa
- Mechanical Engineering Department, Universidad de Antioquia, Medellín, Colombia
| | - Ricardo Moreno
- Mechanical Engineering Department, Universidad de Antioquia, Medellín, Colombia
| | - Edwin L. Chica
- Mechanical Engineering Department, Universidad de Antioquia, Medellín, Colombia
| | - Junes A. Villarraga
- Mechanical Engineering Department, Universidad de Antioquia, Medellín, Colombia
| | - Adrian B. Tepole
- School of Mechanical Engineering, Purdue University, West Lafayette, Indiana, United States of America
- Weldon School of Biomedical Engineering, Purdue University, West Lafayette, Indiana, United States of America
- * E-mail:
| |
Collapse
|
14
|
Douglas P. Overdiagnosis and overtreatment of nipple and breast candidiasis: A review of the relationship between diagnoses of mammary candidiasis and Candida albicans in breastfeeding women. WOMEN'S HEALTH (LONDON, ENGLAND) 2021; 17:17455065211031480. [PMID: 34269140 PMCID: PMC8287641 DOI: 10.1177/17455065211031480] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 04/05/2021] [Revised: 06/22/2021] [Accepted: 06/22/2021] [Indexed: 12/24/2022]
Abstract
BACKGROUND Breastfeeding mothers commonly experience nipple pain accompanied by radiating, stabbing or constant breast pain between feeds, sometimes associated with pink shiny nipple epithelium and white flakes of skin. Current guidelines diagnose these signs and symptoms as mammary candidiasis and stipulate antifungal medications. AIM This study reviews existing research into the relationship between Candida albicans and nipple and breast pain in breastfeeding women who have been diagnosed with mammary candidiasis; whether fluconazole is an effective treatment; and the presence of C. albicans in the human milk microbiome. METHOD The author conducted three searches to investigate (a) breastfeeding-related pain and C. albicans; (b) the efficacy of fluconazole in breastfeeding-related pain; and (c) composition of the human milk mycobiome. These findings are critiqued and integrated in a narrative review. RESULTS There is little evidence to support the hypothesis that Candida spp, including C. albicans, in maternal milk or on the nipple-areolar complex causes the signs and symptoms popularly diagnosed as mammary candidiasis. There is no evidence that antifungal treatments are any more effective than the passage of time in women with these symptoms. Candida spp including C. albicans are commonly identified in healthy human milk and nipple-areolar complex mycobiomes. DISCUSSION Clinical breastfeeding support remains a research frontier. The human milk microbiome, which includes a mycobiome, interacts with the microbiomes of the infant mouth and nipple-areolar complex, including their mycobiomes, to form protective ecosystems. Topical or oral antifungals may disrupt immunoprotective microbial homeostasis. Unnecessary use contributes to the serious global problem of antifungal resistance. CONCLUSION Antifungal treatment is rarely indicated and prolonged courses cannot be justified in breastfeeding women experiencing breast and nipple pain. Multiple strategies for stabilizing microbiome feedback loops when nipple and breast pain emerge are required, in order to avoid overtreatment of breastfeeding mothers and their infants with antifungal medications.
Collapse
Affiliation(s)
- Pamela Douglas
- School of Nursing and Midwifery, Griffith University, Brisbane, QLD, Australia
- Primary Care Clinical Unit, The University of Queensland, Brisbane, QLD, Australia
- The Possums Clinic, Brisbane, QLD, Australia
| |
Collapse
|
15
|
Development of Epidermal Equivalent from Electrospun Synthetic Polymers for In Vitro Irritation/Corrosion Testing. NANOMATERIALS 2020; 10:nano10122528. [PMID: 33339410 PMCID: PMC7766501 DOI: 10.3390/nano10122528] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/14/2020] [Revised: 12/10/2020] [Accepted: 12/10/2020] [Indexed: 12/14/2022]
Abstract
The development of products for topical applications requires analyses of their skin effects before they are destined for the market. At present, the ban on animal use in several tests makes the search for in vitro models (such as artificial skin) necessary to characterize the risks involved. In this work, tissue engineering concepts were used to manufacture collagen-free three-dimensional scaffolds for cell growth and proliferation. Two different human skin models-reconstructed human epidermis and full-thickness skin-were developed from electrospun scaffolds using synthetic polymers such as polyethylene terephthalate, polybutylene terephthalate, and nylon 6/6. After the construction of these models, their histology was analyzed by H&E staining and immunohistochemistry. The results revealed a reconstructed epidermal tissue, duly stratified, obtained from the nylon scaffold. In this model, the presence of proteins involved in the epidermis stratification process (cytokeratin 14, cytokeratin 10, involucrin, and loricrin) was confirmed by immunohistochemistry and Western blot analysis. The nylon reconstructed human epidermis model's applicability was evaluated as a platform to perform irritation and corrosion tests. Our results demonstrated that this model is a promising platform to assess the potential of dermal irritation/corrosion of chemical products.
Collapse
|
16
|
Dwivedi KK, Lakhani P, Kumar S, Kumar N. Frequency dependent inelastic response of collagen architecture of pig dermis under cyclic tensile loading: An experimental study. J Mech Behav Biomed Mater 2020; 112:104030. [PMID: 32858398 DOI: 10.1016/j.jmbbm.2020.104030] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/30/2020] [Revised: 07/06/2020] [Accepted: 08/07/2020] [Indexed: 01/20/2023]
Abstract
The evaluation of collagen architecture of the dermis in response to mechanical stimulation is important as it affects the macroscopic mechanical properties of the dermis. A detailed understanding of the processes involved in the alteration of the collagen structure is required to correlate the mechanical stimulation with tissue remodeling. This study investigated the effect of cyclic frequencies i.e. low (0.1 Hz), medium (2.0 Hz), and high (5.0 Hz) (physiological range) in the alteration of pig dermis collagen structure and its correlation with the macroscopic mechanical response of the dermis. The assessment of the collagen structure of virgin and mechanical tested specimens at tropocollagen, collagen fibril, and fiber level was performed using Fourier-transform infrared-attenuated total reflection (FTIR-ATR), atomic force microscopy (AFM), and scanning electron microscopy (SEM) respectively. After 103 cycles, a significantly higher alteration in collagen structure with discrete plastic-type damage was found for low frequency. This frequency dependent alteration of the collagen structure was found in correlation with the dermis macroscopic response. The value of inelastic strain, stress softening, damage parameter (reduction in elastic modulus), and reduction in energy dissipation were observed significantly large for slow frequency. A power-law based empirical relations, as a function of frequency and number of cycles, were proposed to predict the value of inelastic strain and damage parameter. This study also suggests that hierarchical structural response against the mechanical stimulation is time-dependent rather than cycle-dependent, may affect the tissue remodeling.
Collapse
Affiliation(s)
| | | | - Sachin Kumar
- Department of Mechanical Engineering, IIT, Ropar, India.
| | - Navin Kumar
- Center for Biomedical Engineering Department, IIT, Ropar, India; Department of Mechanical Engineering, IIT, Ropar, India.
| |
Collapse
|
17
|
Liu X, Michael S, Bharti K, Ferrer M, Song MJ. A biofabricated vascularized skin model of atopic dermatitis for preclinical studies. Biofabrication 2020; 12:035002. [PMID: 32059197 DOI: 10.1088/1758-5090/ab76a1] [Citation(s) in RCA: 52] [Impact Index Per Article: 13.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
Abstract
Three-dimensional (3D) biofabrication techniques enable the production of multicellular tissue models as assay platforms for drug screening. The increased cellular and physiological complexity in these 3D tissue models should recapitulate the relevant biological environment found in the body. Here we describe the use of 3D bioprinting techniques to fabricate skin equivalent tissues of varying physiological complexity, including human epidermis, non-vascularized and vascularized full-thickness skin tissue equivalents, in a multi-well platform to enable drug screening. Human keratinocytes, fibroblasts, and pericytes, and induced pluripotent stem cell-derived endothelial cells were used in the biofabrication process to produce the varying complexity. The skin equivalents exhibit the correct structural markers of dermis and epidermis stratification, with physiological functions of the skin barrier. The robustness, versatility and reproducibility of the biofabrication techniques are further highlighted by the generation of atopic dermatitis (AD)-disease like tissues. These AD models demonstrate several clinical hallmarks of the disease, including: (i) spongiosis and hyperplasia; (ii) early and terminal expression of differentiation proteins; and (iii) increases in levels of pro-inflammatory cytokines. We show the pre-clinical relevance of the biofabricated AD tissue models to correct disease phenotype by testing the effects of dexamethasone, an anti-inflammatory corticosteroid, and three Janus Kinase inhibitors from clinical trials for AD. This study demonstrates the development of a versatile and reproducible bioprinting approach to create human skin equivalents with a range of cellular complexity for disease modeling. In addition, we establish several assay readouts that are quantifiable, robust, AD relevant, and can be scaled up for compound screening. The results show that the cellular complexity of the tissues develops a more physiologically relevant AD disease model. Thus, the skin models in this study offer an in vitro approach for the rapid understanding of pathological mechanisms, and testing for efficacy of action and toxic effects of drugs.
Collapse
Affiliation(s)
- Xue Liu
- National Center for Advancing Translational Sciences, National Institute of Health, Rockville, MD, United States of America
| | | | | | | | | |
Collapse
|
18
|
Wei Z, Liu X, Ooka M, Zhang L, Song MJ, Huang R, Kleinstreuer NC, Simeonov A, Xia M, Ferrer M. Two-Dimensional Cellular and Three-Dimensional Bio-Printed Skin Models to Screen Topical-Use Compounds for Irritation Potential. Front Bioeng Biotechnol 2020; 8:109. [PMID: 32154236 PMCID: PMC7046801 DOI: 10.3389/fbioe.2020.00109] [Citation(s) in RCA: 17] [Impact Index Per Article: 4.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/03/2019] [Accepted: 02/03/2020] [Indexed: 11/22/2022] Open
Abstract
Assessing skin irritation potential is critical for the safety evaluation of topical drugs and other consumer products such as cosmetics. The use of advanced cellular models, as an alternative to replace animal testing in the safety evaluation for both consumer products and ingredients, is already mandated by law in the European Union (EU) and other countries. However, there has not yet been a large-scale comparison of the effects of topical-use compounds in different cellular skin models. This study assesses the irritation potential of topical-use compounds in different cellular models of the skin that are compatible with high throughput screening (HTS) platforms. A set of 451 topical-use compounds were first tested for cytotoxic effects using two-dimensional (2D) monolayer models of primary neonatal keratinocytes and immortalized human keratinocytes. Forty-six toxic compounds identified from the initial screen with the monolayer culture systems were further tested for skin irritation potential on reconstructed human epidermis (RhE) and full thickness skin (FTS) three-dimensional (3D) tissue model constructs. Skin irritation potential of the compounds was assessed by measuring tissue viability, trans-epithelial electrical resistance (TEER), and secretion of cytokines interleukin 1 alpha (IL-1α) and interleukin 18 (IL-18). Among known irritants, high concentrations of methyl violet and methylrosaniline decreased viability, lowered TEER, and increased IL-1α secretion in both RhE and FTS models, consistent with irritant properties. However, at low concentrations, these two compounds increased IL-18 secretion without affecting levels of secreted IL-1α, and did not reduce tissue viability and TEER, in either RhE or FTS models. This result suggests that at low concentrations, methyl violet and methylrosaniline have an allergic potential without causing irritation. Using both HTS-compatible 2D cellular and 3D tissue skin models, together with irritation relevant activity endpoints, we obtained data to help assess the irritation effects of topical-use compounds and identify potential dermal hazards.
Collapse
Affiliation(s)
- Zhengxi Wei
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
| | - Xue Liu
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
| | - Masato Ooka
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
| | - Li Zhang
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
| | - Min Jae Song
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
- 3D Bioprinting Core, National Eye Institute, Bethesda, MD, United States
| | - Ruili Huang
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
| | - Nicole C. Kleinstreuer
- Division of the National Toxicology Program, National Institute of Environmental Health Sciences, National Institutes of Health, Research Triangle Park, NC, United States
| | - Anton Simeonov
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
| | - Menghang Xia
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
| | - Marc Ferrer
- Division of Pre-Clinical Innovation, National Center for Advancing Translational Sciences, National Institutes of Health, Rockville, MD, United States
| |
Collapse
|
19
|
Lakhani P, Dwivedi KK, Kumar N. Directional dependent variation in mechanical properties of planar anisotropic porcine skin tissue. J Mech Behav Biomed Mater 2020; 104:103693. [PMID: 32174437 DOI: 10.1016/j.jmbbm.2020.103693] [Citation(s) in RCA: 18] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/13/2019] [Revised: 11/23/2019] [Accepted: 02/09/2020] [Indexed: 11/26/2022]
Abstract
Nonlinear and anisotropic mechanical behavior of skin is essential in various applications such as dermatology, cosmetic products, forensic science, and computational studies. The present study quantifies the mechanical anisotropy of skin using the bulge method and full-field imaging technique. In bulging, the saline solution at 37 °C mimics the in vivo body temperature and fluid conditions, and all experiments were performed in the control environment. Assumption of thin spherical shell membrane theory and imaging techniques were implemented to obtain the anisotropic stress strain relations. Further, stress strain relations at an interval of 10° were calculated to obtain the variation in modulus with direction. Histological examinations were performed to signify the role of the collagen fibers orientation on the mechanical properties. The maximum and minimum linear modulus and collagen fiber orientation intensity were found in good agreement. The angular difference between maximum and minimum linear modulus and orientation intensity was found 71° ± 7° and 76° ± 5° respectively, and the percentage difference was 43.4 ± 8.2 and 52.5 ± 6.4 respectively. Further, a significant difference in the maximum and minimum collagen orientation intensity between the untested and tested specimens indicates the realignment of the fibers. Additionally, a cubic polynomial empirical relation was established to calculate the quantitative variation in the apparent modulus with the directions, which serves for the anisotropic modeling of the skin. The experimental technique used in this study can be applied for anisotropic quantification of planar soft tissues as well as can be utilized to imitate the tissue expansion procedure used in reconstructive surgery.
Collapse
Affiliation(s)
- Piyush Lakhani
- Department of Mechanical Engineering, Indian Institute of Technology Ropar, Rupnagar, 140001, Punjab, India
| | - Krashn K Dwivedi
- Center for Biomedical Engineering, Indian Institute of Technology Ropar, Rupnagar, 140001, Punjab, India
| | - Navin Kumar
- Department of Mechanical Engineering, Indian Institute of Technology Ropar, Rupnagar, 140001, Punjab, India.
| |
Collapse
|
20
|
Lipsky ZW, German GK. Ultraviolet light degrades the mechanical and structural properties of human stratum corneum. J Mech Behav Biomed Mater 2019; 100:103391. [DOI: 10.1016/j.jmbbm.2019.103391] [Citation(s) in RCA: 19] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 04/26/2019] [Revised: 07/26/2019] [Accepted: 08/06/2019] [Indexed: 11/25/2022]
|
21
|
Cleary JM, Lipsky ZW, Kim M, Marques CNH, German GK. Heterogeneous ceramide distributions alter spatially resolved growth of Staphylococcus aureus on human stratum corneum. J R Soc Interface 2019; 15:rsif.2017.0848. [PMID: 29669890 DOI: 10.1098/rsif.2017.0848] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/13/2017] [Accepted: 03/22/2018] [Indexed: 12/11/2022] Open
Abstract
Contemporary studies have revealed dramatic changes in the diversity of bacterial microbiota between healthy and diseased skin. However, the prevailing use of swabs to extract the microorganisms has meant that only population 'snapshots' are obtained, and all spatially resolved information of bacterial growth is lost. Here we report on the temporospatial growth of Staphylococcus aureus on the surface of the human stratum corneum (SC); the outermost layer of skin. This bacterial species dominates bacterial populations on skin with atopic dermatitis (AD). We first establish that the distribution of ceramides naturally present in the SC is heterogeneous, and correlates with the tissue's structural topography. This distribution subsequently impacts the growth of bacterial biofilms. In the SC retaining healthy ceramide concentrations, biofilms exhibit no spatial preference for growth. By contrast, a depletion of ceramides consistent with reductions known to occur with AD enables S. aureus to use the patterned network of topographical canyons as a conduit for growth. The ability of ceramides to govern bacterial growth is confirmed using a topographical skin canyon analogue coated with the ceramide subcomponent d-sphingosine. Our work appears to explain the causal link between ceramide depletion and increased S. aureus populations that is observed in AD. It may also provide insight into disease transmission as well as improving pre-operative skin cleansing techniques.
Collapse
Affiliation(s)
- Joseph M Cleary
- Department of Biomedical Engineering, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA.,Binghamton Biofilm Research Center, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA
| | - Zachary W Lipsky
- Department of Biomedical Engineering, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA.,Binghamton Biofilm Research Center, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA
| | - Minyoung Kim
- Department of Biological Sciences, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA.,Binghamton Biofilm Research Center, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA
| | - Cláudia N H Marques
- Department of Biological Sciences, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA.,Binghamton Biofilm Research Center, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA
| | - Guy K German
- Department of Biomedical Engineering, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA .,Binghamton Biofilm Research Center, Binghamton University, 4400 Vestal Parkway East, Binghamton, NY 13902, USA
| |
Collapse
|
22
|
Embedding topography enables fracture guidance in soft solids. Sci Rep 2019; 9:13493. [PMID: 31530891 PMCID: PMC6748918 DOI: 10.1038/s41598-019-49986-1] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/14/2019] [Accepted: 08/16/2019] [Indexed: 11/08/2022] Open
Abstract
The natural topographical microchannels in human skin have recently been shown to be capable of guiding propagating cracks. In this article we examine the ability to guide fracture by incorporating similar topographical features into both single, and dual layer elastomer membranes that exhibit uniform thickness. In single layer membranes, crack guidance is achieved by minimizing the nadir thickness of incorporated v-shaped channels, maximizing the release of localized strain energy. In dual layer membranes, crack guidance along embedded channels is achieved via interfacial delamination, which requires less energy to create a new surface than molecular debonding. In both membrane types, guided crack growth is only temporary. However, utilizing multiple embedded channels, non-contiguous crack control can be maintained at angles up to 45° from the mode I fracture condition. The ability to control and deflect fracture holds great potential for improving the robustness and lifespan of flexible electronics and stretchable sensors.
Collapse
|
23
|
Linking microvascular collapse to tissue hypoxia in a multiscale model of pressure ulcer initiation. Biomech Model Mechanobiol 2019; 18:1947-1964. [PMID: 31203488 DOI: 10.1007/s10237-019-01187-5] [Citation(s) in RCA: 10] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/06/2019] [Accepted: 06/05/2019] [Indexed: 12/27/2022]
Abstract
Pressure ulcers are devastating injuries that disproportionately affect the older adult population. The initiating factor of pressure ulcers is local ischemia, or lack of perfusion at the microvascular level, following tissue compression against bony prominences. In turn, lack of blood flow leads to a drop in oxygen concentration, i.e, hypoxia, that ultimately leads to cell death, tissue necrosis, and disruption of tissue continuity. Despite our qualitative understanding of the initiating mechanisms of pressure ulcers, we are lacking quantitative knowledge of the relationship between applied pressure, skin mechanical properties as well as structure, and tissue hypoxia. This gap in our understanding is, at least in part, due to the limitations of current imaging technologies that cannot simultaneously image the microvascular architecture, while quantifying tissue deformation. We overcome this limitation in our work by combining realistic microvascular geometries with appropriate mechanical constitutive models into a microscale finite element model of the skin. By solving boundary value problems on a representative volume element via the finite element method, we can predict blood volume fractions in response to physiological skin loading conditions (i.e., shear and compression). We then use blood volume fraction as a homogenized variable to couple tissue-level skin mechanics to an oxygen diffusion model. With our model, we find that moderate levels of pressure applied to the outer skin surface lead to oxygen concentration contours indicative of tissue hypoxia. For instance, we show that applying a pressure of 60 kPa at the skin surface leads to a decrease in oxygen partial pressure from a physiological value of 65 mmHg to a hypoxic level of 31 mmHg. Additionally, we explore the sensitivity of local oxygen concentration to skin thickness and tissue stiffness, two age-related skin parameters. We find that, for a given pressure, oxygen concentration decreases with decreasing skin thickness and skin stiffness. Future work will include rigorous calibration and validation of this model, which may render our work an important tool toward developing better prevention and treatment tools for pressure ulcers specifically targeted toward the older adult patient population.
Collapse
|
24
|
Laiacona D, Cohen JM, Coulon K, Lipsky ZW, Maiorana C, Boltyanskiy R, Dufresne ER, German GK. Non-invasive in vivo quantification of human skin tension lines. Acta Biomater 2019; 88:141-148. [PMID: 30735808 DOI: 10.1016/j.actbio.2019.02.003] [Citation(s) in RCA: 16] [Impact Index Per Article: 3.2] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/30/2018] [Revised: 01/23/2019] [Accepted: 02/04/2019] [Indexed: 01/26/2023]
Abstract
Human skin is a composite tissue that exhibits anisotropic mechanical properties. This anisotropy arises primarily from the alignment of collagen and elastin fibers in the dermis, which causes the skin to exhibit greater tension in one direction, making it appear stiffer. A diverse number of skin tension guidelines have been developed to assist surgeons in making incisions that produce the least conspicuous scars. However, skin anisotropy is believed to vary from subject to subject, and no single guideline is universally recognized as the best to implement for surgical applications. To date, no system exists that can rapidly and non-invasively measure lines of skin tension in vivo. In this article, we evaluate the ability of a new aspiration system to measure the anisotropy of human skin. The device painlessly applies a radial stress of 17 kPa to a region of skin, and captures radially asymmetric skin deformations via a dermal camera. These deformations are used to quantify orientations of strain extrema and the direction of greatest skin stiffness. The ratio of these asymmetric strains varies between 1 and -0.75. A simple 2D transverse isotropic model captures this behavior for multiple anatomical sites. Clinical trials reveal that skin tension line orientations are comparable with existing skin tension maps and generally agree across subjects, however orientations statistically differ between individuals. As such, existing guidelines appear to provide only approximate estimates of skin tension orientation. STATEMENT OF SIGNIFICANCE: Skin tension lines (STL) in human skin arise primarily from collagen fiber alignment in the dermis. These lines are used by surgeons to guide incisions that produce the least conspicuous scars. While numerous anatomical STL maps exist, no single guideline is universally recognized as the most reliable. Moreover, manual methods of quantifying STL are imprecise. For the first time, we have developed a device capable of rapidly and non-invasively measuring STL orientations in vivo, using a single test. Our results are used to establish a simple constitutive model of mechanical skin anisotropy. Clinical trials further reveal STL orientations are comparable with existing maps, but statistically differ between individuals. Existing guidelines therefore appear to provide only approximate estimates of STL orientation.
Collapse
Affiliation(s)
- D Laiacona
- Department of Biomedical Engineering, Binghamton University, NY 13902, USA
| | - J M Cohen
- Department of Biomedical Engineering, Binghamton University, NY 13902, USA
| | - K Coulon
- Department of Biomedical Engineering, Binghamton University, NY 13902, USA
| | - Z W Lipsky
- Department of Biomedical Engineering, Binghamton University, NY 13902, USA
| | - C Maiorana
- Department of Biomedical Engineering, Binghamton University, NY 13902, USA
| | - R Boltyanskiy
- Department of Physics, Yale University, CT 06520, USA; Department of Radiology & Molecular Pharmacology Program, Memorial Sloan Kettering Cancer Center, NY 10065, USA
| | - E R Dufresne
- Department of Materials, Swiss Federal Institute of Technology Zürich, 8093 Zürich, Switzerland
| | - G K German
- Department of Biomedical Engineering, Binghamton University, NY 13902, USA.
| |
Collapse
|
25
|
Akdeniz M, Tomova‐Simitchieva T, Dobos G, Blume‐Peytavi U, Kottner J. Does dietary fluid intake affect skin hydration in healthy humans? A systematic literature review. Skin Res Technol 2018; 24:459-465. [DOI: 10.1111/srt.12454] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Accepted: 01/01/2018] [Indexed: 11/27/2022]
Affiliation(s)
- M. Akdeniz
- Department of Dermatology and AllergyClinical Research Center for Hair and Skin ScienceCharité—Universitätsmedizin Berlin Berlin Germany
| | - T. Tomova‐Simitchieva
- Department of Dermatology and AllergyClinical Research Center for Hair and Skin ScienceCharité—Universitätsmedizin Berlin Berlin Germany
| | - G. Dobos
- Department of Dermatology and AllergyClinical Research Center for Hair and Skin ScienceCharité—Universitätsmedizin Berlin Berlin Germany
| | - U. Blume‐Peytavi
- Department of Dermatology and AllergyClinical Research Center for Hair and Skin ScienceCharité—Universitätsmedizin Berlin Berlin Germany
| | - J. Kottner
- Department of Dermatology and AllergyClinical Research Center for Hair and Skin ScienceCharité—Universitätsmedizin Berlin Berlin Germany
| |
Collapse
|
26
|
Control of human skin wettability using the pH of anionic surfactant solution treatments. Colloids Surf B Biointerfaces 2017. [DOI: 10.1016/j.colsurfb.2017.06.009] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
27
|
Liu X, German GK. Measuring and Modeling Contractile Drying in Human Stratum Corneum. J Vis Exp 2017. [PMID: 28287597 DOI: 10.3791/55336] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/27/2022] Open
Abstract
Stratum corneum (SC) is the most superficial skin layer. Its contact with the external environment means that this tissue layer is subjected to both cleansing agents and daily variations in ambient moisture; both of which can alter the water content of the tissue. Reductions in water content from severe barrier dysfunction or low humidity environments can alter SC stiffness and cause a build-up of drying stresses. In extreme conditions, these factors can cause mechanical rupture of the tissue. We have established a high throughput method of quantifying dynamic changes in the mechanical properties of SC upon drying. This technique can be employed to quantify changes in the drying behavior and mechanical properties of SC with cosmetic cleanser and moisturizer treatments. This is achieved by measuring dynamic variations in spatially resolved in-plane drying displacements of circular tissue samples adhered to an elastomer substrate. In-plane radial displacements acquired during drying are azimuthally averaged and fitted with a profile based on a linear elastic contractility model. Dynamic changes in drying stress and SC elastic modulus can then be extracted from the fitted model profiles.
Collapse
Affiliation(s)
- Xue Liu
- Department of Biomedical Engineering, Binghamton University
| | - Guy K German
- Department of Biomedical Engineering, Binghamton University;
| |
Collapse
|
28
|
A micromechanical comparison of human and porcine skin before and after preservation by freezing for medical device development. Sci Rep 2016; 6:32074. [PMID: 27558287 PMCID: PMC4997349 DOI: 10.1038/srep32074] [Citation(s) in RCA: 81] [Impact Index Per Article: 10.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 05/24/2016] [Accepted: 08/02/2016] [Indexed: 11/08/2022] Open
Abstract
Collecting human skin samples for medical research, including developing microneedle-based medical devices, is challenging and time-consuming. Researchers rely on human skin substitutes and skin preservation techniques, such as freezing, to overcome the lack of skin availability. Porcine skin is considered the best substitute to human skin, but their mechanical resemblance has not been fully validated. We provide a direct mechanical comparison between human and porcine skin samples using a conventional mechano-analytical technique (microindentation) and a medical application (microneedle insertion), at 35% and 100% relative humidity. Human and porcine skin samples were tested immediately after surgical excision from subjects, and after one freeze-thaw cycle at −80 °C to assess the impact of freezing on their mechanical properties. The mechanical properties of fresh human and porcine skin (especially of the stratum corneum) were found to be different for bulk measurements using microindentation; and both types of skin were mechanically affected by freezing. Localized in-plane mechanical properties of skin during microneedle insertion appeared to be more comparable between human and porcine skin samples than their bulk out-of-plane mechanical properties. The results from this study serve as a reference for future mechanical tests conducted with frozen human skin and/or porcine skin as a human skin substitute.
Collapse
|