Engineering biologically extensible hydrogels using photolithographic printing

Novel supramolecular luminescent metallogels containing Tb(iii) and Eu(iii) ions with benzene-1,3,5-tricarboxylic acid gelator: advancing semiconductor applications in microelectronic devices

A novel strategy was employed to create supramolecular metallogels incorporating Tb(iii) and Eu(iii) ions using benzene-1,3,5-tricarboxylic acid (TA) as a gelator in N,N-dimethylformamide (DMF). Rheological analysis demonstrated their mechanical robustness under varying stress levels and angular frequencies. FESEM imaging revealed a flake-like hierarchical network for Tb-TA and a rod-shaped architecture for Eu-TA. EDX analysis confirmed essential chemical constituents within the metallogels. FT-IR, PXRD, Raman spectroscopy, and thermogravimetric analysis assessed their gelation process and material properties, showing semiconducting characteristics, validated by optical band-gap measurements. Metal-semiconductor junction-based devices integrating Al metal with Tb(iii)- and Eu(iii)-metallogels exhibited non-linear charge transport akin to a Schottky diode, indicating potential for advanced electronic device development. Direct utilization of benzene-1,3,5-tricarboxylic acid and Tb(iii)/Eu(iii) sources underscores their suitability as semiconducting materials for device fabrication. This study explores the versatile applications of Tb-TA and Eu-TA metallogels, offering insights for material science researchers.

Photo-Controllable Smart Hydrogels for Biomedical Application: A Review

Nowadays, smart hydrogels are being widely studied by researchers because of their advantages such as simple preparation, stable performance, response to external stimuli, and easy control of response behavior. Photo-controllable smart hydrogels (PCHs) are a class of responsive hydrogels whose physical and chemical properties can be changed when stimulated by light at specific wavelengths. Since the light source is safe, clean, simple to operate, and easy to control, PCHs have broad application prospects in the biomedical field. Therefore, this review timely summarizes the latest progress in the PCHs field, with an emphasis on the design principles of typical PCHs and their multiple biomedical applications in tissue regeneration, tumor therapy, antibacterial therapy, diseases diagnosis and monitoring, etc. Meanwhile, the challenges and perspectives of widespread practical implementation of PCHs are presented in biomedical applications. This study hopes that PCHs will flourish in the biomedical field and this review will provide useful information for interested researchers.

A Platform for Assessing Cellular Contractile Function Based on Magnetic Manipulation of Magnetoresponsive Hydrogel Films

Despite significant advancements in in vitro cardiac modeling approaches, researchers still lack the capacity to obtain in vitro measurements of a key indicator of cardiac function: contractility, or stroke volume under specific loading conditions-defined as the pressures to which the heart is subjected prior to and during contraction. This work puts forward a platform that creates this capability, by providing a means of dynamically controlling loading conditions in vitro. This dynamic tissue loading platform consists of a thin magnetoresponsive hydrogel cantilever on which 2D engineered myocardial tissue is cultured. Exposing the cantilever to an external magnetic field-generated by positioning magnets at a controlled distance from the cantilever-causes the hydrogel film to stretch, creating tissue load. Next, cell contraction is induced through electrical stimulation, and the force of the contraction is recorded, by measuring the cantilever's deflection. Force-length-based measurements of contractility are then derived, comparable to clinical measurements. In an illustrative application, the platform is used to measure contractility both in untreated myocardial tissue and in tissue exposed to an inotropic agent. Clear differences are observed between conditions, suggesting that the proposed platform has significant potential to provide clinically relevant measurements of contractility.

A novel supramolecular Zn(ii)-metallogel: an efficient microelectronic semiconducting device application

A unique strategy for the synthesis of a supramolecular metallogel employing zinc ions and adipic acid in DMF medium has been established at room temperature. Rheological analysis was used to investigate the mechanical characteristics of the supramolecular Zn(ii)-metallogel. Field emission scanning electron microscopy and transmission electron microscopy were used to analyse the hexagonal shape morphological features of the Zn(ii)-metallogel. Interestingly, the electrical conductivity is observed in the electronic device with Zn(ii)-metallogel based metal-semiconductor (MS) junctions. All aspects of the metallogel's electrical properties were investigated. The electrical conductivity of the metallogel-based thin film device was 7.38 × 10-5 S m-1. The synthesised Zn(ii)-metallogel based device was investigated for its semi-conductive properties, such as its Schottky barrier diode nature.

Towards spatially-organized organs-on-chip: Photopatterning cell-laden thiol-ene and methacryloyl hydrogels in a microfluidic device

Micropatterning techniques for 3D cell cultures enable the recreation of tissue-level structures, but the combination of patterned hydrogels with organs-on-chip to generate organized 3D cultures under microfluidic perfusion remains challenging. To address this technological gap, we developed a user-friendly in-situ micropatterning protocol that integrates photolithography of crosslinkable, cell-laden hydrogels with a simple microfluidic housing, and tested the impact of crosslinking chemistry on stability and spatial resolution. Working with gelatin functionalized with photo-crosslinkable moieties, we found that inclusion of cells at high densities (≥ 107/mL) did not impede thiol-norbornene gelation, but decreased the storage moduli of methacryloyl hydrogels. Hydrogel composition and light dose were selected to match the storage moduli of soft tissues. To generate the desired pattern on-chip, the cell-laden precursor solution was flowed into a microfluidic chamber and exposed to 405 nm light through a photomask. The on-chip 3D cultures were self-standing and the designs were interchangeable by simply swapping out the photomask. Thiol-ene hydrogels yielded highly accurate feature sizes from 100 - 900 μm in diameter, whereas methacryloyl hydrogels yielded slightly enlarged features. Furthermore, only thiol-ene hydrogels were mechanically stable under perfusion overnight. Repeated patterning readily generated multi-region cultures, either separately or adjacent, including non-linear boundaries that are challenging to obtain on-chip. As a proof-of-principle, primary human T cells were patterned on-chip with high regional specificity. Viability remained high (> 85%) after 12-hr culture with constant perfusion. We envision that this technology will enable researchers to pattern 3D co-cultures to mimic organ-like structures that were previously difficult to obtain.

A croconate-directed supramolecular self-healable Cd(II)-metallogel with dispersed 2D-nanosheets of hexagonal boron nitride: a comparative outcome of the charge-transport phenomena and non-linear rectifying behaviour of semiconducting diodes

The use of croconic acid disodium salt (CADS) as an organic gelator with Cd(II) salt to obtain an efficient soft-scaffold supramolecular self-healable metallogel (Cd-CADS) in N,N-dimethyl formamide (DMF) media was investigated following an ultrasonication technique. The experimentally scrutinized rheological values of the fabricated metallogel not only revealed the visco-elastic property and mechanical stiffness, but also exposed the self-healable behaviour of the gel material. Two-dimensional (2D) nanosheets of hexagonal boron nitride (h-BN) were incorporated within the gel network to obtain a 2D nanosheet dispersed metallogel of Cd(II) croconate (h-BN@Cd-CADS). The microstructural investigations of the original gel network and hexagonal boron nitride (h-BN) 2D nanosheet dispersed gel-network were performed through field emission scanning electron microscopy (FESEM) and established the interconnecting rod-like fibrous type morphological patterns and inter-connected hexagonal type rod-shaped architecture pattern, respectively. High resolution transmission electron microscopy (HRTEM) was used to visualize the morphological distinction of the Cd-CADS metallogel with the h-BN 2D nanosheets. The infrared spectral (FT-IR) outputs helped to identify the formation pathway to construct the semi-solid self-healing flexible metallogel and h-BN 2D nanosheet dispersed metallogel nanocomposite, respectively. Fascinating electronic-charge transportation was revealed in the as-fabricated Cd-CADS and h-BN@Cd-CADS metallogel-based devices. Furthermore, h-BN 2D-nanosheet-directed modulation of the non-linear rectifying feature of the supramolecular Cd-CADS-metallogel was observed, with the h-BN@Cd-CADS metallogel showing a greater rectifying property, implying that it has a higher conductivity compared to the Cd-CADS metallogel.

A computational framework for biomaterials containing three-dimensional random fiber networks based on the affine kinematics

Understanding the structure-function relationship of biomaterials can provide insights into different diseases and advance numerous biomedical applications. This paper presents a finite element-based computational framework to model biomaterials containing a three-dimensional fiber network at the microscopic scale. The fiber network is synthetically generated by a random walk algorithm, which uses several random variables to control the fiber network topology such as fiber orientations and tortuosity. The geometric information of the generated fiber network is stored in an array-like data structure and incorporated into the nonlinear finite element formulation. The proposed computational framework adopts the affine fiber kinematics, based on which the fiber deformation can be expressed by the nodal displacement and the finite element interpolation functions using the isoparametric relationship. A variational approach is developed to linearize the total strain energy function and derive the nodal force residual and the stiffness matrix required by the finite element procedure. Four numerical examples are provided to demonstrate the capabilities of the proposed computational framework, including a numerical investigation about the relationship between the proposed method and a class of anisotropic material models, a set of synthetic examples to explore the influence of fiber locations on material local and global responses, a thorough mesh-sensitivity analysis about the impact of mesh size on various numerical results, and a detailed case study about the influence of material structures on the performance of eggshell-membrane-hydrogel composites. The proposed computational framework provides an efficient approach to investigate the structure-function relationship for biomaterials that follow the affine fiber kinematics.

Multiphoton Laser Fabrication of Hybrid Photo-Activable Biomaterials

The possibility to shape stimulus-responsive optical polymers, especially hydrogels, by means of laser 3D printing and ablation is fostering a new concept of “smart” micro-devices that can be used for imaging, thermal stimulation, energy transducing and sensing. The composition of these polymeric blends is an essential parameter to tune their properties as actuators and/or sensing platforms and to determine the elasto-mechanical characteristics of the printed hydrogel. In light of the increasing demand for micro-devices for nanomedicine and personalized medicine, interest is growing in the combination of composite and hybrid photo-responsive materials and digital micro-/nano-manufacturing. Existing works have exploited multiphoton laser photo-polymerization to obtain fine 3D microstructures in hydrogels in an additive manufacturing approach or exploited laser ablation of preformed hydrogels to carve 3D cavities. Less often, the two approaches have been combined and active nanomaterials have been embedded in the microstructures. The aim of this review is to give a short overview of the most recent and prominent results in the field of multiphoton laser direct writing of biocompatible hydrogels that embed active nanomaterials not interfering with the writing process and endowing the biocompatible microstructures with physically or chemically activable features such as photothermal activity, chemical swelling and chemical sensing.

Coil-stretch-like transition of elastic sheets in extensional flows

The conformation of a long linear polymer dissolved in fluid and exposed to an extensional flow is well-known to exhibit a "coil-stretch" transition, which for sufficiently long chains can lead to bistability. The present work reports computations indicating that an analogous "compact-stretched" transition arises in the dynamics of a thin elastic sheet. Sheets of nominally circular, square or rectangular shape are simulated in planar and biaxial flows using a finite element method for the sheet conformations and a regularized Stokeslet method for the fluid flow. If a neo-Hookean constitutive model is used for the sheet elasticity, the sheets will stretch without bound once a critical extension rate, as characterized nondimensionally by a capillary number, is exceeded. Nonlinear elasticity, represented with the Yeoh model, arrests the stretching, leading to a highly-stretched steady state once the critical capillary number is exceeded. For all shapes and in both planar and biaxial extension, a parameter regime exists in which both weakly stretched (compact) and strongly stretched states can be found, depending on initial conditions. I.e. this parameter regime displays bistability. As in the long-chain polymer case, the bistable behavior arises from the hydrodynamic interaction between distant elements of the sheet, and vanishes if these interactions are artificially screened by use of a Brinkman model for the fluid motion. While the sheets can transiently display wrinkled shapes, all final shapes in planar and biaxial extension are planar.

4,4′-Bipyridine-based Ni(ii)-metallogel for fabricating a photo-responsive Schottky barrier diode device

4,4′-Bipyridine-based Ni(ii)-metallogel has been implemented to execute a light-responsive semiconducting Schottky barrier diode device with advanced functionality.

Protein-Functionalized Poly(ethylene glycol) Hydrogels as Scaffolds for Monolayer Organoid Culture

Stem cell-derived, organotypic in vitro models, known as organoids, have emerged as superior alternatives to traditional cell culture models due to their unparalleled ability to recreate complex physiological and pathophysiological processes. For this reason, they are attractive targets of tissue-engineering efforts, as constructs that include organoid technology would be expected to better simulate the many functions of the desired tissue or organ. While the 3D spheroidal architecture that is the default architecture of most organoid models may be preferred for some applications, 2D monolayer arrangements remain the preferred organization for many applications in tissue engineering. Therefore, in this work, we present a method to create monolayer organoid cultures on poly(ethylene glycol) (PEG) hydrogel scaffolds, using intestinal epithelial organoids (IEOs) as a proof-of-concept. Our process involves two steps: the hydrogel is first functionalized with a layer of poly(D-lysine) (PDL), which then allows the adsorption of pristine, unmodified basement membrane proteins. This approach successfully mediates the formation of IEO monolayer unlike conventional approaches that rely on covalent modification of the hydrogel surface with cell-adhesive peptides and basement membrane proteins. We show that these IEO monolayers recreate important physiological functions of the native intestinal epithelium, including multilineage differentiation, apical-basal polarization, and the ability to model infections with human norovirus. We also show coating of a scaffold mimicking intestinal villous topography, resulting in a 3D IEO monolayer. We expect that this protocol will be useful to researchers attempting to leverage the increased physiological relevance of organoid models to elevate the potential of their tissue-engineered constructs. Impact statement While organoids are physiologically superior models of biological functions than traditional cell cultures, their 3D spheroidal architecture is an obstacle to their incorporation in many tissue-engineering applications, which often prefer 2D monolayer arrangements of cells. For this reason, we developed a protocol to establish monolayer cultures of organoids on poly(ethylene glycol) hydrogels and demonstrate its utility using intestinal epithelial organoids as a proof-of-concept. We expect that this protocol will be of use to researchers creating engineered tissues for both regenerative medicine applications, as well as advanced in vitro experimental models.

Poly(ethylene glycol)-Based Coatings for Bioprosthetic Valve Tissues: Toward Restoration of Physiological Behavior

Bioprosthetic valves (BPVs) have a limited lifespan in the body necessitating repeated surgeries to replace the failed implant. Early failure of these implants has been linked to various surface properties of the valve. Surface properties of BPVs are significantly different from physiological valves because of the fixation process used when processing the xenograft tissue. To improve the longevity of BPVs, efforts need to be taken to improve the surface properties and shield the implant from the bodily interactions that degrade it. Toward this goal, we evaluated the use of hydrogel coatings to attach to the BPV tissue and impart surface properties that are close to physiological. Hydrogels are well characterized for their biocompatibility and highly tunable surface characteristics. Using a previously published coating method, we deposited hydrogel coatings of poly(ethylene glycol)diacrylate (PEGDA) and poly(ethylene glycol)diacrylamide (PEGDAA) atop BPV samples. Coated samples were evaluated against the physiological tissue and uncoated glutaraldehyde-fixed tissue for deposition of hydrogel, surface adherence, mechanical properties, and fixation properties. Results showed both PEGDA- and PEGDAA-deposited coatings were nearly continuous across the valve leaflet surface. Further, the PEGDA- and PEGDAA-coated samples showed restoration of physiological levels of protein adhesion and mechanical stiffness. Interestingly, the coating process rather than the coating itself altered the material behavior yet did not alter the cross-linking from fixation. These results show that the PEG-based coatings for BPVs can successfully alter surface properties of BPVs and help promote physiological characteristics without interfering with the necessary fixation.

Spatiotemporally Controlled Photoresponsive Hydrogels: Design and Predictive Modeling from Processing through Application

Photoresponsive hydrogels (PRHs) are soft materials whose mechanical and chemical properties can be tuned spatially and temporally with relative ease. Both photo-crosslinkable and photodegradable hydrogels find utility in a range of biomedical applications that require tissue-like properties or programmable responses. Progress in engineering with PRHs is facilitated by the development of theoretical tools that enable optimization of their photochemistry, polymer matrices, nanofillers, and architecture. This review brings together models and design principles that enable key applications of PRHs in tissue engineering, drug delivery, and soft robotics, and highlights ongoing challenges in both modeling and application.

Interfacial Coating Method for Amine-Rich Surfaces using Poly(ethylene glycol) Diacrylate Applied to Bioprosthetic Valve Tissue Models

Bioprosthetic heart valve implants are beset by calcification and failure due to the interactions between the body and the transplant. Hydrogels can be used as biological blank slates that may help to shield implants from these interactions; however, traditional light-based hydrogel polymerization is impeded by tissue opacity and topography. Therefore, new methods must be created to bind hydrogel to implant tissues. To address these complications, a two-step surface-coating method for bioprosthetic valves was developed. A previously developed bioprosthetic valve model (VM) was used to investigate and optimize the coating method. Generally, this coating is achieved by first reacting surface amine groups with an NHS-PEG-acrylate while also allowing glucose to absorb into the bulk. Then, glucose oxidase, poly(ethylene glycol) diacrylate (PEGDA), and iron ions are added to the system to initiate free-radical polymerization that bonds the PEGDA hydrogel to the acrylates sites on the surface. Results showed a thin (∼8 μm), continuous coating on VM samples that is capable of repelling protein adhesion (2% surface fouling versus 20% on uncoated samples) and does not significantly affect the surface mechanical properties. Based on this success, the coating method was translated to glutaraldehyde-fixed valve tissue samples. Results showed noncontinuous but evident coating on the surface, which was further improved by adjusting the coating solution. These results demonstrate the feasibility of the proposed two-step surface coating method for modifying the surface of bioprosthetic valve replacements.

Comparing the Role of Mechanical Forces in Vascular and Valvular Calcification Progression

Calcification is a prevalent disease in most fully developed countries and is predominantly observed in heart valves and nearby vasculature. Calcification of either tissue leads to deterioration and, ultimately, failure causing poor quality of life and decreased overall life expectancy in patients. In valves, calcification presents as Calcific Aortic Valve Disease (CAVD), in which the aortic valve becomes stenotic when calcific nodules form within the leaflets. The initiation and progression of these calcific nodules is strongly influenced by the varied mechanical forces on the valve. In turn, the addition of calcific nodules creates localized disturbances in the tissue biomechanics, which affects extracellular matrix (ECM) production and cellular activation. In vasculature, atherosclerosis is the most common occurrence of calcification. Atherosclerosis exhibits as calcific plaque formation that forms in juxtaposition to areas of low blood shear stresses. Research in these two manifestations of calcification remain separated, although many similarities persist. Both diseases show that the endothelial layer and its regulation of nitric oxide is crucial to calcification progression. Further, there are similarities between vascular smooth muscle cells and valvular interstitial cells in terms of their roles in ECM overproduction. This review summarizes valvular and vascular tissue in terms of their basic anatomy, their cellular and ECM components and mechanical forces. Calcification is then examined in both tissues in terms of disease prediction, progression, and treatment. Highlighting the similarities and differences between these areas will help target further research toward disease treatment.

A supramolecular Cd(ii)-metallogel: an efficient semiconductive electronic device

A supramolecular Cd(ii)-metallogel with oxalic acid in DMF medium has been achieved, and the semi-conductive characteristics such as the Schottky barrier diode nature of the metallogel were explored.