Bio-engineering a prevascularized human tri-layered skin substitute containing a hypodermis

Applications of blood plasma derivatives for cutaneous wound healing: A mini-review of clinical studies

Skin injuries are a global healthcare problem. Chronic ulcers do not heal in a timely fashion, so it is essential to help the body with skin repair. There are some treatments that have been applied to chronic ulcers. One of these treatments is growth factor (GF) therapy. Platelet-rich plasma (PRP) and Platelet-poor plasma (PPP) are two types of plasma derivatives containing many GFs important for wound healing. Several works have reported their application in wound healing and tissue regeneration. The use of autologous PRP is now an adequate alternative in regenerative medicine. It was also demonstrated that PPP is a hemostatic agent for wounds. This review has studied the latest clinical studies, which have applied PRP and PPP to patients with chronic wounds.

Recent advances in the 3D skin bioprinting for regenerative medicine: Cells, biomaterials, and methods

The skin is a tissue constantly exposed to the risk of damage, such as cuts, burns, and genetic disorders. The standard treatment is autograft, but it can cause pain to the patient being extremely complex in patients suffering from burns on large body surfaces. Considering that there is a need to develop technologies for the repair of skin tissue like 3D bioprinting. Skin is a tissue that is approximately 1/16 of the total body weight and has three main layers: epidermis, dermis, and hypodermis. Therefore, there are several studies using cells, biomaterials, and bioprinting for skin regeneration. Here, we provide an overview of the structure and function of the epidermis, dermis, and hypodermis, and showed in the recent research in skin regeneration, the main cells used, biomaterials studied that provide initial support for these cells, allowing the growth and formation of the neotissue and general characteristics, advantages and disadvantages of each methodology and the landmarks in recent research in the 3D skin bioprinting.

Development of carboxymethyl cellulose/gelatin hydrogel loaded with Omega-3 for skin regeneration

Hydrogels have several characteristics, including biocompatibility, physical similarity with the skin's extracellular matrix, and regeneration capacity. Cell migration and proliferation are facilitated by natural polymers such as gelatin (Gel) and carboxymethyl cellulose (CMC). Gelatin dressing acts as a structural framework for cell migration into the wound area, stimulating cell division and promoting granulation tissue formation. Omega-3 fatty acids from fish oil may prevent wound infection and improve the healing of wounds in the early stages. We studied the preparation of wound dressing containing Omega-3 and its ability to heal wounds. In this study, CMC-Gel hydrogels containing different concentrations of Omega-3 were investigated in full-thickness wounds. After the fabrication of the hydrogels by using surfactant (tween 20) and microemulsion method (oil in water), various tests such as SEM, Water uptake evaluation, weight loss, cell viability, blood compatibility, and in vivo study in rat cutaneous modeling during 14 days were performed to evaluate the properties of the fabricated hydrogels. The analysis of the hydrogels revealed that they possess porous structures with interconnected pores, with an average size of 83.23 ± 6.43 μm. The hydrogels exhibited a swelling capacity of up to 60% of their initial weight within 24 h, as indicated by the weight loss and swelling measurements. Cell viability study with the MTT technique showed that no cytotoxicity was observed at the recommended dosage, however, increasing the amount of omega-3 caused hemolysis, cell death, and inhibition of coagulation activity. An in vivo study in adult male rats with a full-thickness model showed greater than 91% improvement of the primary wound region after 2 weeks of treatment. Histological analysis demonstrated Omega-3 in hydrogels, which is a promising approach for topical skin treatment to prevent scar, and has shown efficacy as wound dressing by improving the repair process at the defect site.

3D-Bioprinted Skin Tissues for Improving Wound Healing: Current Status and Perspective

Advancements in tissue engineering enable the fabrication of complex and functional tissues or organs. In particular, bioprinting enables controlled and accurate deposition of cells, biomaterials, and growth factors to create complex 3D skin constructs specific to a particular individual. Despite these advancements, challenges such as vascularization, long-term stability, and regulatory considerations hinder the clinical translation of bioprinted skin constructs. This chapter focuses on such approaches using advanced biomaterials and bioprinting techniques to overcome the current barriers in wound-healing studies. Moreover, it addresses current obstacles in wound-healing studies, highlighting the need for continued research and innovation to overcome these barriers and facilitate the practical utilization of bioprinted skin constructs in clinical settings.

Reconstructed Human Skin with Hypodermis Shows Essential Role of Adipose Tissue in Skin Metabolism

BACKGROUND

Dysregulation of skin metabolism is associated with a plethora of diseases such as psoriasis and dermatitis. Until now, reconstructed human skin (RhS) models lack the metabolic potential of native human skin, thereby limiting their relevance to study human healthy and diseased skin. We aimed to determine whether incorporation of an adipocyte-containing hypodermis into RhS improves its metabolic potential and to identify major metabolic pathways up-regulated in adipose-RhS.

METHODS

Primary human keratinocytes, fibroblasts and differentiated adipose-derived stromal cells were co-cultured in a collagen/fibrin scaffold to create an adipose-RhS. The model was extensively characterized structurally in two- and three-dimensions, by cytokine secretion and RNA-sequencing for metabolic enzyme expression.

RESULTS

Adipose-RhS showed increased secretion of adipokines. Both RhS and adipose-RhS expressed 29 of 35 metabolic genes expressed in ex vivo native human skin. Addition of the adipose layer resulted in up-regulation of 286 genes in the dermal-adipose fraction of which 7 were involved in phase I (CYP19A1, CYP4F22, CYP3A5, ALDH3B2, EPHX3) and phase II (SULT2B1, GPX3) metabolism. Vitamin A, D and carotenoid metabolic pathways were enriched. Additionally, pro-inflammatory (IL-1β, IL-18, IL-23, IL-33, IFN-α2, TNF-α) and anti-inflammatory cytokine (IL-10, IL-12p70) secretion was reduced in adipose-RhS.

CONCLUSIONS

Adipose-RhS mimics healthy native human skin more closely than traditional RhS since it has a less inflamed phenotype and a higher metabolic activity, indicating the contribution of adipocytes to tissue homeostasis. Therefore it is better suited to study onset of skin diseases and the effect of xenobiotics.

A sustainable strategy for generating highly stable human skin equivalents based on fish collagen

Tissue engineered skin equivalents are increasingly recognized as potential alternatives to traditional skin models such as human ex vivo skin or animal skin models. However, most of the currently investigated human skin equivalents (HSEs) are constructed using mammalian collagen which can be expensive and difficult to extract. Fish skin is a waste product produced by fish processing industries and identified as a cost-efficient and sustainable source of type I collagen. In this work, we describe a method for generating highly stable HSEs based on fibrin fortified tilapia fish collagen. The fortified fish collagen (FFC) formulation is optimized to enable reproducible fabrication of full-thickness HSEs that undergo limited contraction, facilitating the incorporation of human donor-derived skin cells and formation of biomimetic dermal and epidermal layers. The morphology and barrier function of the FFC HSEs are compared with a commercial skin model and validated with immunohistochemical staining and transepithelial electrical resistance testing. Finally, the potential of a high throughput screening platform with FFC HSE is explored by scaling down its fabrication to 96-well format.

Intraoperative bioprinting of human adipose-derived stem cells and extra-cellular matrix induces hair follicle-like downgrowths and adipose tissue formation during full-thickness craniomaxillofacial skin reconstruction

Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2 % or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo. Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.

Characterization and biocompatibility evaluation of acellular rat skin scaffolds for skin tissue engineering applications

Utilization of acellular scaffolds, extracellular matrix (ECM) without cell content, is growing in tissue engineering, due to their high biocompatibility, bioactivity ad mechanical support. Hence, the purpose of this research was to study the characteristics and biocompatibility of decellularized rat skin scaffolds using the osmotic shock method. First, the skin of male Wistar rats was harvested and cut into 1 × 1 cm2 pieces. Then, some of the harvested parts were subjected to the decellularization process by applying osmotic shock. Comparison of control and scaffold samples was conducted in order to assure cell elimination and ECM conservation by means of histological evaluations, quantification of biochemical factors, measurement of DNA amount, and photographing the ultrastructure of the samples by scanning electron microscopy (SEM). In order to evaluate stem cell viability and adhesion to the scaffold, adipose-derived mesenchymal stem cells (AD-MSCs) were seeded on the acellular scaffolds. Subsequently, MTT test and SEM imaging of the scaffolds containing cultured cells were applied. The findings indicated that in the decellularized scaffolds prepared by osmotic shock method, not only the cell content was removed, but also the ECM components and its ultrastructure were preserved. Also, the 99% viability and adhesion of AD-MSCs cultured on the scaffolds indicate the biocompatibility of the decellularized skin scaffold. In conclusion, decellularized rat skin scaffolds are biocompatible and appropriate scaffolds for future investigations of tissue engineering applications.

Hierarchical double-layer microneedles accomplish multicenter skin regeneration in diabetic full-thickness wounds

INTRODUCTION

Managing large chronic wounds presents significant challenges because of inadequate donor sites, infection, and lack of structural support from dermal substitutes. Hydrogels are extensively used in various forms to promote chronic wound healing and provide a three-dimensional spatial structure, through growth factors or cell transport.

OBJECTIVES

We present a novel multicenter regenerative model that is capable of regenerating and merging simultaneously to form a complete layer of skin. This method significantly reduces wound healing time compared to the traditional centripetal healing model. We believe that our model can improve clinical outcomes and pave the way for further research into regenerative medicine.

METHODS

We prepared a novel multi-island double-layer microneedle (MDMN) using gelatin-methacryloylchitosan (GelMA-CS). The MDMN was loaded with keratinocytes (KCs) and dermal fibroblasts (FBs). Our aim in this study was to explore the therapeutic potential of MDMN in a total skin excision model.

RESULTS

The MDMN model replicated the layered structure of full-thickness skin and facilitated tissue regeneration and healing via dual omni-bearing. Multi-island regeneration centres accomplished horizontal multicentric regeneration, while epidermal and dermal cells migrated synchronously from each location. This produced a healing area approximately 4.7 times greater than that of the conventional scratch tests. The MDMN model exhibited excellent antibacterial properties, attributed to the chitosan layer. During wound healing in diabetic mice, the MDMN achieved earlier epidermal coverage and faster wound healing through multi-island regeneration centres and the omnidirectional regeneration mode. The MDMN group displayed an accelerated wound healing rate upon arrival at the destination (0.96 % ± 0.58 % vs. 4.61 % ± 0.32 %). Additionally, the MDMN group exhibited superior vascularization and orderly collagen deposition.

CONCLUSION

The present study presents a novel skin regeneration model using microneedles as carriers of autologous keratinocytes and dermal fibroblasts, which allows for omni-directional, multi-center, and full-thickness skin regeneration.

Layer-by-Layer Analysis of In Vitro Skin Models

In vitro human skin models are evolving into versatile platforms for the study of skin biology and disorders. These models have many potential applications in the fields of drug testing and safety assessment, as well as cosmetic and new treatment development. The development of in vitro skin models that accurately mimic native human skin can reduce reliance on animal models and also allow for more precise, clinically relevant testing. Recent advances in biofabrication techniques and biomaterials have led to the creation of increasingly complex, multilayered skin models that incorporate important functional components of skin, such as the skin barrier, mechanical properties, pigmentation, vasculature, hair follicles, glands, and subcutaneous layer. This improved ability to recapitulate the functional aspects of native skin enhances the ability to model the behavior and response of native human skin, as the complex interplay of cell-to-cell and cell-to-material interactions are incorporated. In this review, we summarize the recent developments in in vitro skin models, with a focus on their applications, limitations, and future directions.

Advances in tissue engineering and biofabrication for in vitro skin modeling

The global prevalence of skin disease and injury is continually increasing, yet conventional cell-based models used to study these conditions do not accurately reflect the complexity of human skin. The lack of inadequate in vitro modeling has resulted in reliance on animal-based models to test pharmaceuticals, biomedical devices, and industrial and environmental toxins to address clinical needs. These in vivo models are monetarily and morally expensive and are poor predictors of human tissue responses and clinical trial outcomes. The onset of three-dimensional (3D) culture techniques, such as cell-embedded and decellularized approaches, has offered accessible in vitro alternatives, using innovative scaffolds to improve cell-based models' structural and histological authenticity. However, these models lack adequate organizational control and complexity, resulting in variations between structures and the exclusion of physiologically relevant vascular and immunological features. Recently, biofabrication strategies, which combine biology, engineering, and manufacturing capabilities, have emerged as instrumental tools to recreate the heterogeneity of human skin precisely. Bioprinting uses computer-aided design (CAD) to yield robust and reproducible skin prototypes with unprecedented control over tissue design and assembly. As the interdisciplinary nature of biofabrication grows, we look to the promise of next-generation biofabrication technologies, such as organ-on-a-chip (OOAC) and 4D modeling, to simulate human tissue behaviors more reliably for research, pharmaceutical, and regenerative medicine purposes. This review aims to discuss the barriers to developing clinically relevant skin models, describe the evolution of skin-inspired in vitro structures, analyze the current approaches to biofabricating 3D human skin mimetics, and define the opportunities and challenges in biofabricating skin tissue for preclinical and clinical uses.

Intraoperative Bioprinting of Human Adipose-derived Stem cells and Extra-cellular Matrix Induces Hair Follicle-Like Downgrowths and Adipose Tissue Formation during Full-thickness Craniomaxillofacial Skin Reconstruction

Craniomaxillofacial (CMF) reconstruction is a challenging clinical dilemma. It often necessitates skin replacement in the form of autologous graft or flap surgery, which differ from one another based on hypodermal/dermal content. Unfortunately, both approaches are plagued by scarring, poor cosmesis, inadequate restoration of native anatomy and hair, alopecia, donor site morbidity, and potential for failure. Therefore, new reconstructive approaches are warranted, and tissue engineered skin represents an exciting alternative. In this study, we demonstrated the reconstruction of CMF full-thickness skin defects using intraoperative bioprinting (IOB), which enabled the repair of defects via direct bioprinting of multiple layers of skin on immunodeficient rats in a surgical setting. Using a newly formulated patient-sourced allogenic bioink consisting of both human adipose-derived extracellular matrix (adECM) and stem cells (ADSCs), skin loss was reconstructed by precise deposition of the hypodermal and dermal components under three different sets of animal studies. adECM, even at a very low concentration such as 2% or less, has shown to be bioprintable via droplet-based bioprinting and exhibited de novo adipogenic capabilities both in vitro and in vivo . Our findings demonstrate that the combinatorial delivery of adECM and ADSCs facilitated the reconstruction of three full-thickness skin defects, accomplishing near-complete wound closure within two weeks. More importantly, both hypodermal adipogenesis and downgrowth of hair follicle-like structures were achieved in this two-week time frame. Our approach illustrates the translational potential of using human-derived materials and IOB technologies for full-thickness skin loss.

Adipose Mesenchymal Stem Cell Derived Exosomes Promote Keratinocytes and Fibroblasts Embedded in Collagen/Platelet-Rich Plasma Scaffold and Accelerate Wound Healing

Engineered skin substitutes derived from human skin significantly reduce inflammatory reactions mediated by foreign/artificial materials and are consequently easier to use for clinical application. Type I collagen is a main component of the extracellular matrix during wound healing and has excellent biocompatibility, and platelet-rich plasma can be used as the initiator of the healing cascade. Adipose mesenchymal stem cell derived exosomes are crucial for tissue repair and play key roles in enhancing cell regeneration, promoting angiogenesis, regulating inflammation, and remodeling extracellular matrix. Herein, Type I collagen and platelet-rich plasma, which provide natural supports for keratinocyte and fibroblast adhesion, migration, and proliferation, are mixed to form a stable 3D scaffold. Adipose mesenchymal stem cell derived exosomes are added to the scaffold to improve the performance of the engineered skin. The physicochemical properties of this cellular scaffold are analyzed, and the repair effect is evaluated in a full-thickness skin defect mouse model. The cellular scaffold reduces the level of inflammation and promotes cell proliferation and angiogenesis to accelerate wound healing. Proteomic analysis shows that exosomes exhibit excellent anti-inflammatory and proangiogenic effects in collagen/platelet-rich plasma scaffolds. The proposed method provides a new therapeutic strategy and theoretical basis for tissue regeneration and wound repair.

Role of Graphene Oxide in Bacterial Cellulose-Gelatin Hydrogels for Wound Dressing Applications

Biopolymer-based hydrogels have several advantages, including robust mechanical tunability, high biocompatibility, and excellent optical properties. These hydrogels can be ideal wound dressing materials and advantageous to repair and regenerate skin wounds. In this work, we prepared composite hydrogels by blending gelatin and graphene oxide-functionalized bacterial cellulose (GO-f-BC) with tetraethyl orthosilicate (TEOS). The hydrogels were characterized using Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscope (AFM), and water contact angle analyses to explore functional groups and their interactions, surface morphology, and wetting behavior, respectively. The swelling, biodegradation, and water retention were tested to respond to the biofluid. Maximum swelling was exhibited by GBG-1 (0.01 mg GO amount) in all media (aqueous = 1902.83%, PBS = 1546.63%, and electrolyte = 1367.32%). All hydrogels were hemocompatible, as their hemolysis was less than 0.5%, and blood coagulation time decreased as the hydrogel concentration and GO amount increased under in vitro standard conditions. These hydrogels exhibited unusual antimicrobial activities against Gram-positive and Gram-negative bacterial strains. The cell viability and proliferation were increased with an increased GO amount, and maximum values were found for GBG-4 (0.04 mg GO amount) against fibroblast (3T3) cell lines. The mature and well-adhered cell morphology of 3T3 cells was found for all hydrogel samples. Based on all findings, these hydrogels would be a potential wound dressing skin material for wound healing applications.

A digital light processing 3D-printed artificial skin model and full-thickness wound models using silk fibroin bioink

A three-dimensional (3D) artificial skin model offers diverse platforms for skin transplantation, disease mechanisms, and biomaterial testing for skin tissue. However, implementing physiological complexes such as the neurovascular system with living cells in this stratified structure is extremely difficult. In this study, full-thickness skin models were fabricated from methacrylated silk fibroin (Silk-GMA) and gelatin (Gel-GMA) seeded with keratinocytes, fibroblasts, and vascular endothelial cells representing the epidermis and dermis layers through a digital light processing (DLP) 3D printer. Printability, mechanical properties, and cell viability of the skin hydrogels fabricated with different concentrations of Silk-GMA and Gel-GMA were analyzed to find the optimal concentrations for the 3D printing of the artificial skin model. After the skin model was DLP-3D printed using Gel-GMA 15% + Silk-GMA 5% bioink, cultured, and air-lifted for four weeks, well-proliferated keratinocytes and fibroblasts were observed in histological analysis, and increased expressions of Cytokeratin 13, Phalloidin, and CD31 were noted in immunofluorescence staining. Furthermore, full-thickness skin wound models were 3D-printed to evaluate the wound-healing capabilities of the skin hydrogel. When the epidermal growth factor (EGF) was applied, enhanced wound healing in the epidermis and dermis layer with the proliferation of keratinocytes and fibroblasts was observed. Also, the semi-quantitative reverse transcription-polymerase chain reaction revealed increased expression of Cytokeratin 13, fibroblast growth factor, and CD31 in the EGF-treated group relative to the control group. The DLP 3D-printed artificial skin model was mechanically stable and biocompatible for more than four weeks, demonstrating the potential for application in skin tissue engineering. STATEMENT OF SIGNIFICANCE: A full-thickness artificial skin model was 3D-printed in this study with a digital light processing technique using silk fibroin and gelatin, which mimics the structural and cellular compositions of the human skin. The 3D-printed skin hydrogel ensured the viability of the cells in the skin layers that proliferated well after air-lifting cultivation, shown in the histological analysis and immunofluorescence stainings. Furthermore, full-thickness skin wound models were 3D-printed to evaluate the wound healing capabilities of the skin hydrogel, which demonstrated enhanced wound healing in the epidermis and dermis layer with the application of epidermal growth factor on the wound compared to the control. The bioengineered hydrogel expands the applicability of artificial skin models for skin substitutes, wound models, and drug testing.

A Comparative Analysis of Biological and Synthetic Skin Models for Drug Transport Studies

Ethical restrictions as well as practical or economic issues related to use of animal and human skin has been the main reason the growth in the number of investigations with alternative models. Reconstructed skin models, for example, have been useful to evaluate the in vitro toxicity of compounds; however, these models usually overestimate the amount of drug permeated due to impaired barrier properties. In this review, the performance of synthetic and biological skin models in transport studies was compared by considering two compounds with different physicochemical properties. The advantages and limitations of each skin model are discussed in detail. Although synthetic and reconstructed skin models have shown to be useful in the formulation optimization step, they present many limitations: (1) impaired barrier properties; (2) lack of follicular transport; (3) no metabolism in synthetic membranes; (4) differences in terms of lipid organization; (5) more affected by formulation constituents. Therefore, animal and human tissues should still be prioritized in drug transport studies until new advances in alternative models are achieved. Investigations of the impact of cell-culture conditions on skin formation, in turn, bring perspectives related to the development of unhealthy/injured skin models (an aspect that still deserves attention).

CD146 expression profile in human skin and pre-vascularized dermo-epidermal skin substitutes in vivo

BACKGROUND

CD146 is a cell adhesion molecule whose expression profile in human skin has not yet been elucidated. Here, we characterize CD146 expression pattern in human skin, in particular in blood endothelial cells (BECs) and lymphatic endothelial cells (LECs), which constitute human dermal microvascular endothelial cells (HDMECs), as well as in perivascular cells.

RESULTS

We demonstrated that CD146 is a specific marker of BECs, but not of LECs. Moreover, we found CD146 expression also in human pericytes surrounding blood capillaries in human skin. In addition, we demonstrated that CD146 expression is up-regulated by the TNFα-IL-1β/NF-kB axis in both BECs and pericytes. Finally, we engineered 3D collagen hydrogels composed of HDMECs, CD146⁺ pericytes, and fibroblasts which developed, in vitro and in vivo, a complete microvasculature network composed of blood and lymphatic capillaries with pericytes investing blood capillaries.

CONCLUSIONS

Overall, our results proved that CD146 is a specific marker of BECs and pericytes, but not LECs in human skin. Further, the combination of CD146⁺ pericytes with HDMECs in skin substitutes allowed to bioengineer a comprehensive 3D in vitro and in vivo model of the human dermal microvasculature.

Engineering multifunctional bioactive citrate-based biomaterials for tissue engineering

Developing bioactive biomaterials with highly controlled functions is crucial to enhancing their applications in regenerative medicine. Citrate-based polymers are the few bioactive polymer biomaterials used in biomedicine because of their facile synthesis, controllable structure, biocompatibility, biomimetic viscoelastic mechanical behavior, and functional groups available for modification. In recent years, various multifunctional designs and biomedical applications, including cardiovascular, orthopedic, muscle tissue, skin tissue, nerve and spinal cord, bioimaging, and drug or gene delivery based on citrate-based polymers, have been extensively studied, and many of them have good clinical application potential. In this review, we summarize recent progress in the multifunctional design and biomedical applications of citrate-based polymers. We also discuss the further development of multifunctional citrate-based polymers with tailored properties to meet the requirements of various biomedical applications.

•

Multifunctional bioactive citrate-based biomaterials have broad applications in regenerative medicine.

•

Recent advances in multifunctional design and biomedical applications of citate-based polymers are summarized.

•

Future challenge of citrate-based polymers in various biomedical applications are discussed.

Leveraging Tissue Engineering for Skin Cancer Models

Bioengineered in vitro three-dimensional (3D) skin model has emerged as a promising tool for recapitulating different types of skin cancer and performing pre-clinical tests. However, a full-thickness 3D model including the epidermis, dermis, and hypodermis layers is scarce despite its significance in human physiology and diverse biological processes. In this book chapter, an attempt has been made to summarize various skin cancer models, including utilized skin layers, materials, cell lines, specific treatments, and fabrication techniques for three types of skin cancer: melanoma, basal cell carcinoma (BCC), and squamous cell carcinoma (SCC). Subsequently, current limitations and future directions of skin cancer models are discussed. The knowledge of the current status of skin cancer models can provide various potential applications in cancer research and thus a more effective way for cancer treatment.

The ROC skin model: a robust skin equivalent for permeation and live cell imaging studies

Rat Epidermal Keratinocyte (REK) Organotypic Culture (ROC) is an epidermis model that is robust and inexpensive to develop and maintain, and it has in previous studies been shown to have permeability characteristics close to those of human skin. Here, we characterize the model further by structural comparison to native human and rat skin and by investigating functional characteristics of lipid packing, polarity, and permeability coefficients. We show that the ROC model has structural similarities to native human skin and observe human skin-like permeability coefficients for testosterone and mannitol. We develop a transwell device that allows live cell microscopy of the tissue at the air-liquid interface and establish transgenic cell lines expressing different fluorescently tagged proteins. This enables showing the migration of keratinocytes during the first days after seeding, finding that keratinocytes have a higher mean migration rate in the earlier days of development. Collectively, our results show that the ROC model is an inexpensive and robust epidermis model that works reproducibly across laboratories.

Cellular Pathogenesis of Chemotherapy-Induced Peripheral Neuropathy: Insights From Drosophila and Human-Engineered Skin Models

Chemotherapy-induced peripheral neuropathy (CIPN) is a highly prevalent and complex condition arising from chemotherapy cancer treatments. Currently, there are no treatment or prevention options in the clinic. CIPN accompanies pain-related sensory functions starting from the hands and feet. Studies focusing on neurons in vitro and in vivo models significantly advanced our understanding of CIPN pathological mechanisms. However, given the direct toxicity shown in both neurons and non-neuronal cells, effective in vivo or in vitro models that allow the investigation of neurons in their local environment are required. No single model can provide a complete solution for the required investigation, therefore, utilizing a multi-model approach would allow complementary advantages of different models and robustly validate findings before further translation. This review aims first to summarize approaches and insights from CIPN in vivo models utilizing small model organisms. We will focus on Drosophila melanogaster CIPN models that are genetically amenable and accessible to study neuronal interactions with the local environment in vivo. Second, we will discuss how these findings could be tested in physiologically relevant vertebrate models. We will focus on in vitro approaches using human cells and summarize the current understanding of engineering approaches that may allow the investigation of pathological changes in neurons and the skin environment.

Oxygenation therapies for improved wound healing: Current trends and technologies

Degree of oxygenation is one of the important parameters governing various processes, including cell proliferation, angiogenesis, extracellular matrix production, and even combating the microbial burden at the wound site, all...

An Overview of Cellulose Derivatives-Based Dressings for Wound-Healing Management

Presently, notwithstanding the progress regarding wound-healing management, the treatment of the majority of skin lesions still represents a serious challenge for biomedical and pharmaceutical industries. Thus, the attention of the researchers has turned to the development of novel materials based on cellulose derivatives. Cellulose derivatives are semi-synthetic biopolymers, which exhibit high solubility in water and represent an advantageous alternative to water-insoluble cellulose. These biopolymers possess excellent properties, such as biocompatibility, biodegradability, sustainability, non-toxicity, non-immunogenicity, thermo-gelling behavior, mechanical strength, abundance, low costs, antibacterial effect, and high hydrophilicity. They have an efficient ability to absorb and retain a large quantity of wound exudates in the interstitial sites of their networks and can maintain optimal local moisture. Cellulose derivatives also represent a proper scaffold to incorporate various bioactive agents with beneficial therapeutic effects on skin tissue restoration. Due to these suitable and versatile characteristics, cellulose derivatives are attractive and captivating materials for wound-healing applications. This review presents an extensive overview of recent research regarding promising cellulose derivatives-based materials for the development of multiple biomedical and pharmaceutical applications, such as wound dressings, drug delivery devices, and tissue engineering.

Engineering functional skin constructs: A quantitative comparison of three-dimensional bioprinting with traditional methods

Tissue engineering has been successful in reproducing human skin equivalents while incorporating new approaches such as three-dimensional (3D) bioprinting. The latter method offers a plethora of advantages including increased production scale, ability to incorporate multiple cell types and printing on demand. However, the quality of printed skin equivalents compared to those developed manually has never been assessed. To leverage the benefits of this method, it is imperative that 3D-printed skin should be structurally and functionally similar to real human skin. Here, we developed four bilayered human skin epidermal-dermal equivalents: non-printed dermis and epidermis (NN), printed dermis and epidermis (PP), printed epidermis and non-printed dermis (PN), and non-printed epidermis and printed dermis (NP). The effects of printing induced shear stress [0.025 kPa (epidermis); 0.049 kPa (dermis)] were characterized both at the cellular and at the tissue level. At cellular level, no statistically significant differences in keratinocyte colony-forming efficiency (CFE) (p = 0.1641) were observed. In the case of fibroblasts, no significant differences in the cell alignment index (p < 0.1717) and their ability to contract collagen gel (p = 0.851) were detected. At the tissue levels, all the four skin equivalents were characterized using histological and immunohistochemical analysis with no significant differences found in either epidermal basal cell count, thickness of viable epidermis, and relative intensity of filaggrin and claudin-1. Our results demonstrated that 3D printing can achieve the same high-quality skin constructs as have been developed traditionally, thus opening new avenues for numerous high-throughput industrial and clinical applications.