Collagen sponges for bone regeneration with rhBMP-2

Regulating the bioactivity of non-glycosylated recombinant human bone morphogenetic protein-2 to enhance bone regeneration

Recombinant human bone morphogenetic protein-2 (rhBMP-2) is the predominant growth factor that effectively induces osteogenic differentiation in orthopedic procedures. However, the bioactivity and stability of rhBMP-2 are intrinsically associated with its sequence, structure, and storage conditions. In this study, we successfully determined the amino acid sequence and protein secondary structure model of non-glycosylated rhBMP-2 expressed by an E. coli expression system through X-ray crystal structure analysis. Furthermore, we observed that acidic storage conditions enhanced the proliferative and osteoinductive activity of rhBMP-2. Although the osteogenic activity of non-glycosylated rhBMP-2 is relatively weaker compared to glycosylated rhBMP-2; however, this discrepancy can be mitigated by incorporating exogenous chaperone molecules. Overall, such information is crucial for rationalizing the design of stabilization methods and enhancing the bioactivity of rhBMP-2, which may also be applicable to other growth factors.

Bone-targeted lipoplex-loaded three-dimensional bioprinting bilayer scaffold enhanced bone regeneration

Clinical bone-morphogenetic protein 2 (BMP2) treatment for bone regeneration, often resulting in complications like soft tissue inflammation and ectopic ossification due to high dosages and non-specific delivery systems, necessitates research into improved biomaterials for better BMP2 stability and retention. To tackle this challenge, we introduced a groundbreaking bone-targeted, lipoplex-loaded, three-dimensional bioprinted bilayer scaffold, termed the polycaprolactone-bioink-nanoparticle (PBN) scaffold, aimed at boosting bone regeneration. We encapsulated BMP2 within the fibroin nanoparticle based lipoplex (Fibroplex) and functionalized it with DSS6 for bone tissue-specific targeting. 3D printing technology enables customized, porous PCL scaffolds for bone healing and soft tissue growth, with a two-step bioprinting process creating a cellular lattice structure and a bioink grid using gelatin-alginate hydrogel and DSS6-Fibroplex, shown to support effective nutrient exchange and cell growth at specific pore sizes. The PBN scaffold is predicted through in silico analysis to exhibit biased BMP2 release between bone and soft tissue, a finding validated by in vitro osteogenic differentiation assays. The PBN scaffold was evaluated for critical calvarial defects, focusing on sustained BMP2 delivery, prevention of soft tissue cell infiltration and controlled fiber membrane pore size in vivo. The PBN scaffold demonstrated a more than eight times longer BMP2 release time than that of the collagen sponge, promoting osteogenic differentiation and bone regeneration in a calvarial defect animal. Our findings suggest that the PBN scaffold enhanced the local concentration of BMP2 in bone defects through sustained release and improved the spatial arrangement of bone formation, thereby reducing the risk of heterotopic ossification.

Gene Therapy and Spinal Fusion: Systematic Review and Meta-Analysis of the Available Data

OBJECTIVE

To analyze the extant literature describing the application of gene therapy to spinal fusion.

METHODS

A systematic review of the English-language literature was performed. The search query was designed to include all published studies examining gene therapy approaches to promote spinal fusion. Approaches were classified as ex vivo (delivery of genetically modified cells) or in vivo (delivery of growth factors via vectors). The primary endpoint was fusion rate. Random effects meta-analyses were performed to calculate the overall odds ratio (OR) of fusion using a gene therapy approach and overall fusion rate. Subgroup analyses of fusion rate were also performed for each gene therapy approach.

RESULTS

Of 1179 results, 35 articles met criteria for inclusion (all preclinical), of which 26 utilized ex vivo approaches and 9 utilized in vivo approaches. Twenty-seven articles (431 animals) were included in the meta-analysis. Gene therapy use was associated with significantly higher fusion rates (OR 77; 95% confidence interval {CI}: [31, 192]; P < 0.001); ex vivo strategies had a greater effect (OR 136) relative to in vivo strategies (OR 18) (P = 0.017). The overall fusion rate using a gene therapy approach was 80% (95% CI: [62%, 93%]; P < 0.001); overall fusion rates were significantly higher in subjects treated with ex vivo compared to in vivo strategies (90% vs. 42%; P = 0.011). For both ex vivo and in vivo approaches, the effect of gene therapy on fusion was independent of animal model.

CONCLUSIONS

Gene therapy may augment spinal fusion; however, future investigation in clinical populations is necessary.

Multifunctional Nanofibrous Hollow Microspheres for Enhanced Periodontal Bone Regeneration

Destructive periodontitis destroys alveolar bone and eventually leads to tooth loss. While guided bone regeneration, which is based on creating a physical barrier to hinder the infiltration of epithelial and connective tissues into defect sites, has been widely used for alveolar bone regeneration, its outcomes remain variable. In this work, a multifunctional nanofibrous hollow microsphere (NFHMS) is developed for enhanced alveolar bone regeneration. The NFHMS is first prepared via combining a double emulsification and a thermally induced phase separation process. Next, E7, a short peptide with high specific affinity to bone marrow-derived stem cells (BMSCs), is conjugated onto the surface of NFHMS. After that, bone forming peptide (BFP), a short peptide derived from bone morphology protein 7 is loaded in calcium phosphate (CaP) nanoparticles, which are further encapsulated in the hollow space of the NFHMS-E7 to form NFHMS-E7-CaP/BFP. The NFHMS-E7-CaP/BFP selectively promoted the adhesion of BMSCs and expelled the adhesion of fibroblasts and epithelial cells. In addition, the BFP is sustainedly released from the NFHMS-E7-CaP/BFP to enhance the osteogenesis of BMSCs. A rat challenging fenestration defect model showed that the NFHMS-E7-CaP/BFP significantly enhanced alveolar bone tissue regeneration. This work provides a novel bioengineering approach for guided bone regeneration.

An Innovative Design to Enhance Osteoinductive Efficacy and Biomechanical Behavior of a Titanium Dental Implant

The present study investigated the in vivo bone-forming efficacy of an innovative titanium (Ti) dental implant combined with a collagen sponge containing recombinant human bone morphogenetic protein-2 (BMP-2) in a pig model. Two different concentrations of BMP-2 (20 and 40 µg/mL) were incorporated into collagen sponges and placed at the bottom of Ti dental implants. The investigated implants were inserted into the edentulous ridge at the canine-premolar regions of Lanyu small-ear pigs, which were then euthanized at weeks 1, 2, 4, 8, and 12 post-implantation. Specimens containing the implants and surrounding bone tissue were collected for histological evaluation of their bone-to-implant contact (BIC) ratios and calculation of maximum torques using removal torque measurement. Analytical results showed that the control and BMP-2-loaded implants presented good implant stability and bone healing for all testing durations. After 1 week of healing, the BMP-2-loaded implants with a concentration of 20 µg/mL exhibited the highest BIC ratios, ranging from 58% to 76%, among all groups (p = 0.034). Additionally, they also possessed the highest removal torque values (50.1 ± 1.3 N-cm) throughout the 8-week healing period. The BMP-2-loaded implants not only displayed excellent in vivo biocompatibility but also presented superior osteoinductive performance. Therefore, these findings demonstrate that BMP-2 delivered through a collagen sponge can potentially enhance the early-stage osseointegration of Ti dental implants.

Demineralized dentin matrix for bone regeneration in dentistry: A critical update

Over the last few decades, several new materials and techniques have been developed for bone regeneration. Scaffolds based on demineralized dentin matrix (DDM) present an attractive option due to their availability and several animal and human studies have been conducted to ascertain their utility in regenerative dentistry. The aim of this review was to summarize the recent studies conducted on DDM and used for bone grafts. PubMed, Web of Science, and Scopus were used to search for studies published within the last 10 years. The keywords and terms used were: "demineralized dentine matrix", "bone grafting", "bone augmentation" and "guided tissue regeneration" in various combinations. Original studies (in vitro, animal and human) and systematic reviews were included in the literature search. The literature search initially identified 23 studies (16 animal studies and 7 clinical reports. Most studies included in this review indicate that DDM has demonstrated promising results in a variety of dental and regenerative medicine applications. Further studies are required to completely comprehend its characteristics and prospective applications. Future studies should also focus on optimizing the processing protocols for the production of DDM-based scaffolds.

The Influence of Hydroxyapatite Crystals on the Viscoelastic Behavior of Poly(vinyl alcohol) Braid Systems

Composites of poly(vinyl alcohol) (PVA) in the shape of braids, in combination with crystals of hydroxyapatite (HAp), were analyzed to perceive the influence of this bioceramic on both the quasi-static and viscoelastic behavior under tensile loading. Analyses involving energy-dispersive X-ray spectroscopy (EDS) and scanning electron microscopy (SEM) allowed us to conclude that the production of a homogeneous layer of HAp on the braiding surface and the calcium/phosphate atomic ratio were comparable to those of natural bone. The maximum degradation temperature established by thermogravimetric analysis (TGA) showed a modest decrease with the addition of HAp. By adding HAp to PVA braids, an increase in the glass transition temperature (Tg) is noticed, as demonstrated by dynamic mechanical analysis (DMA) and differential thermal analysis (DTA). The PVA/HAp composite braids' peaks were validated by Fourier transform infrared (FTIR) spectroscopy to be in good agreement with common PVA and HAp patterns. PVA/HAp braids, a solution often used in the textile industry, showed superior overall mechanical characteristics in monotonic tensile tests. Creep and relaxation testing showed that adding HAp to the eight and six-braided yarn architectures was beneficial. By exhibiting good mechanical performance and most likely increased biological qualities that accompany conventional care for bone applications in the fracture healing field, particularly multifragmentary ones, these arrangements can be applied as a fibrous fixation system.

Optimized bone grafting

Bone grafting is routinely performed in periodontology and oral surgery to fill bone voids. While autogenous bone is considered the gold standard because of its regenerative properties, allografts and xenografts have more commonly been utilized owing to their availability as well as their differential regenerative/biomechanical properties. In particular, xenografts are sintered at high temperatures, which allows for their slower degradation and resorption rates and/or nonresorbable features. As a result, clinicians have combined xenografts with other classes of bone grafts (most notably allografts and autografts in various ratios) for procedures requiring better long-term stability, such as contour grafting, sinus elevation procedures, and vertical bone augmentations. This review addresses the regenerative properties of each class of bone grafts and then highlights the importance of understanding each of their biomechanical and regenerative properties for clinical applications, including extraction site management, contour augmentation, sinus grafting, and horizontal and vertical augmentation procedures. Thereafter, an introduction toward the novel production of nonresorbable bone allografts (NRBAs) via high-temperature sintering is presented. These NRBAs not only pose the advantage of being more biocompatible than xenografts owing to their origin (human vs. animal bone) but also display nonresorbable properties similar to those of xenografts. Thus, while packaging allografts with xenografts in premixtures specific to various clinical indications has never been permitted owing to cross-species contamination and FDA/CE requirements, the discovery and production of NRBAs allows premixing with standard allografts in various ratios without regulatory restrictions. Therefore, premixtures of allografts with NRBAs can be produced in various ratios for specific indications (e.g., a 1:1 ratio similar to an allograft/xenograft mixture for sinus grafting) without the need for purchasing separate classes of bone grafts. This optimized form of bone grafting could theoretically provide clinicians more precise ratios without the need to purchase separate bone grafts. This review highlights the future potential for simplified and optimized bone grafting in periodontology and implant dentistry.

rhBMP6 in autologous blood coagulum is a preferred osteoinductive device to rhBMP2 on bovine collagen sponge in the rat ectopic bone formation assay

Osteoinductive BMPs require a suitable delivery system for treating various pathological conditions of the spine and segmental bone defects. INFUSE, the only commercially available BMP-based osteoinductive device, consisting of rhBMP2 on bovine absorbable collagen sponge (ACS) showed major disadvantages due to serious side effects. A novel osteoinductive device, OSTEOGROW, comprised of rhBMP6 dispersed within autologous blood coagulum (ABC) is a promising therapy for bone regeneration, subjected to several clinical trials for diaphysial bone repair and spinal fusion. In the present study, we have examined the release dynamics showing that the ABC carrier provided a slower, more steady BMP release in comparison to the ACS. Rat subcutaneous assay was employed to evaluate cellular events and the time course of ectopic osteogenesis. The host cellular response to osteoinductive implants was evaluated by flow cytometry, while dynamics of bone formation and maintenance in time were evaluated by histology, immunohistochemistry and micro CT analyses. Flow cytometry revealed that the recruitment of lymphoid cell populations was significantly higher in rhBMP6/ABC implants, while rhBMP2/ACS implants recruited more myeloid populations. Furthermore, rhBMP6/ABC implants more efficiently attracted early and committed progenitor cells. Dynamics of bone formation induced by rhBMP2/ACS was characterized by a delayed endochondral ossification process in comparison to rhBMP6/ABC implants. Besides, rhBMP6/ABC implants induced more ectopic bone volume in all observed time points in comparison to rhBMP2/ACS implants. These results indicate that OSTEOGROW was superior to INFUSE due to ABC's advantages as a carrier and rhBMP6 superior efficacy in inducing bone.

Injectable and Cell-Laden Hydrogel in the Contained Bone Defect Animal Model: A Systematic Review

BACKGROUND

Due to its high water content and biomimetic properties simulating extracellular matrix (ECM), hydrogels have been used as preferred cell culture and delivery systems. Similarly, cell-loaded hydrogels can be easily injected into target areas in a minimally invasive manner, minimizing surgical trauma, adapting to irregular shaped defects, and benefiting patients. In this study, we systematically reviewed multiple studies on hydrogel-based bone defect research and briefly summarized the progress of injectable and cell-loaded hydrogels in bone defect repair.

METHODS

A systematic search was conducted in the PubMed and Web of Science databases using selected search terms.

RESULTS

Initially, 185 articles were retrieved from the databases. After full-text screening based on inclusion and exclusion criteria, 26 articles were included in this systematic review. Data collected from each study included culture model, seed cell type and origin, cell concentration, scaffold material, scaffold shape, experimental animal and site, bioactive agents, and binding method. This injectable and cell-loaded hydrogel shows certain feasibility in bone tissue engineering applications.

CONCLUSION

Injectable and cell-loaded hydrogels have been widely applied in bone tissue engineering research. The future direction of bone tissue engineering for bone defect treatment involves the use of new hydrogel materials and biochemical stimulation.

An engineered periosteum for efficient delivery of rhBMP-2 and mesenchymal progenitor cells during bone regeneration

During bone regeneration, the periosteum acts as a carrier for key regenerative cues, delivering osteochondroprogenitor cells and crucial growth factors to the injured bone. We developed a biocompatible, 3D polycaprolactone (PCL) melt electro-written membrane to act as a mimetic periosteum. Poly (ethyl acrylate) coating of the PCL membrane allowed functionalization, mediated by fibronectin and low dose recombinant human BMP-2 (rhBMP-2) (10-25 μg/ml), resulting in efficient, sustained osteoinduction in vitro. In vivo, rhBMP-2 functionalized mimetic periosteum demonstrated regenerative potential in the treatment of rat critical-size femoral defects with highly efficient healing and functional recovery (80%-93%). Mimetic periosteum has also proven to be efficient for cell delivery, as observed through the migration of transplanted periosteum-derived mesenchymal cells to the bone defect and their survival. Ultimately, mimetic periosteum demonstrated its ability to deliver key stem cells and morphogens to an injured site, exposing a therapeutic and translational potential in vivo when combined with unprecedentedly low rhBMP-2 doses.

Application of Escherichia coli-Derived Recombinant Human Bone Morphogenic Protein-2 to Unstable Spinal Fractures

(1) Background: Recently, Escherichia coli-derived recombinant human bone morphogenetic protein-2 (E. coli-derived rhBMP-2) has been increasingly applied to different types of spinal surgeries and reported to achieve successful fusion. This pilot study aimed to evaluate the clinical efficacy and safety of rhBMP-2 in patients undergoing posterior instrumented fusions for unstable spinal fractures. (2) Methods: This study included ten consecutive patients undergoing spinal surgery using E. coli-derived rhBMP-2 with more than one year of follow-up. Radiologic outcomes were compared, including the average fracture healing period, local kyphosis correction, and clinical outcomes between preoperative and the last follow-up. (3) Results: The average time of radiographic union was 99.9 ± 45.4 (62-192) days, with an average use of 5.2 ± 3.9 months of anabolic agents. Radiologic parameters such as anterior vertebral height and vertebral wedge angle were significantly corrected postoperatively and at the last follow-up. Clinical outcomes other than leg pain were significantly improved after the surgery. In addition, four patients with preoperative neurologic deficits showed improved neurologic status. (4) Conclusions: Combined with the anabolic agents, applying E. coli-derived rhBMP-2 to the fractured vertebral body could be an effective surgical treatment for unstable spinal fractures. Further trials are needed to validate this result.

Enhanced Bone Formation by Rapidly Formed Bony Wall over the Bone Defect Using Dual Growth Factors

BACKGROUND

In guided bone regeneration (GBR), there are various problems that occur in the bone defect after the wound healing period. This study aimed to investigate the enhancement of the osteogenic ability of the dual scaffold complex and identify the appropriate concentration of growth factors (GF) for new bone formation based on the novel GBR concept that is applying rapid bone forming GFs to the membrane outside of the bone defect.

METHODS

Four bone defects with a diameter of 8 mm were formed in the calvaria of New Zealand white rabbits each to perform GBR. Collagen membrane and biphasic calcium phosphate (BCP) were applied to the bone defects with the four different concetration of BMP-2 or FGF-2. After 2, 4, and 8 weeks of healing, histological, histomorphometric, and immunohistochemical analyses were conducted.

RESULTS

In the histological analysis, continuous forms of new bones were observed in the upper part of bone defect in the experimental groups, whereas no continuous forms were observed in the control group. In the histomorphometry, The group to which BMP-2 0.5 mg/ml and FGF-2 1.0 mg/ml was applied showed statistically significantly higher new bone formation. Also, the new bone formation according to the healing period was statistically significantly higher at 8 weeks than at 2, 4 weeks.

CONCLUSION

The novel GBR method in which BMP-2, newly proposed in this study, is applied to the membrane is effective for bone regeneration. In addition, the dual scaffold complex is quantitatively and qualitatively advantageous for bone regeneration and bone maintenance over time.

Preparation and characterization of 3D hydroxyapatite/collagen scaffolds and its application in bone regeneration with bone morphogenetic protein-2

Desirable bone engineering materials should have a conducive three-dimensional (3D) structure and bioactive mediators for guided bone regeneration. In the present study, hydroxyapatite (HA)/collagen (Col) scaffolds were prepared by an optimized freeze-drying process. The porosity, moisture content, and mechanical properties of the composite have been investigated. The micro-morphology and structure were analyzed with scanning electron microscopy (SEM) and transmission electron microscopy (TEM), confirmed that self-cross-linked HA/Col was evenly distributed and formed a 3D porous scaffold. The physicochemical/mechanical characterization was carried out by Fourier transform infrared spectroscopy (FT-IR) and X-ray diffraction (XRD). Morphological observation and CCK-8 assay of co-culture cells indicated that HA/Col scaffolds were biocompatible. Then HA/Col scaffolds coupled with recombinant human bone morphogenetic proteins 2 (rhBMP-2) were implanted in the mandibular critical size defect in rats, and histological staining was used to evaluate the bone reconstruction. The result showed that HA/Col coupled with rhBMP-2 could significantly improve the formation of new bone and angiogenesis within the scaffolds as well as the proliferation and differentiation of osteoblasts. Thanks to the encouraging osteogenesis effects, the well-defined 3D scaffolds (HA/Col) cooperating with bioactive agents (rhBMP-2) are expected to be a promising candidate for bone tissue engineering applied to regenerative medicine.

Addition of Resolvins D1 or E1 to Collagen Membranes Mitigates Their Resorption in Diabetic Rats

Uncontrolled diabetes is characterized by aberrant inflammatory reactions and increased collagenolysis. We have reported that it accelerates the degradation of implanted collagen membranes (CM), thus compromising their function in regenerative procedures. In recent years, a group of physiological anti-inflammatory agents called specialized pro-resolving lipid mediators (SPMs) have been tested as a treatment for various inflammatory conditions, either systemically or locally, via medical devices. Yet, no study has tested their effect on the fate of the biodegradable material itself. Here, we measured the in vitro release over time of 100 or 800 ng resolvin D1 (RvD1) incorporated into CM discs. In vivo, diabetes was induced in rats with streptozotocin, while buffer-injected (normoglycemic) rats served as controls. Resolvins (100 or 800 ng of RvD1 or RvE1) were added to biotin-labeled CM discs, which were implanted sub-periosteally over the calvaria of rats. Membrane thickness, density, and uniformity were determined by quantitative histology after 3 weeks. In vitro, significant amounts of RvD1 were released over 1-8 days, depending on the amount loaded. In vivo, CMs from diabetic animals were thinner, more porous, and more variable in thickness and density. The addition of RvD1 or RvE1 improved their regularity, increased their density, and reduced their invasion by the host tissue significantly. We conclude that addition of resolvins to biodegradable medical devices can protect them from excessive degradation in systemic conditions characterized by high degree of collagenolysis.

Integrated Osteoinductive Factors─Exosome@MicroRNA-26a Hydrogel Enhances Bone Regeneration

MicroRNAs (miRNAs) are a new therapeutic tool that can target multiple genes by inducing translation repression and target mRNA degradation. Although miRNAs have gained significant attention in oncology and in work on genetic disorders and autoimmune diseases, their application in tissue regeneration remains hindered by several challenges, such as miRNA degradation. Here, we reported Exosome@MicroRNA-26a (Exo@miR-26a), an osteoinductive factor that can be substituted for routinely used growth factors, which was constructed using bone marrow stem cell (BMSC)-derived exosomes and microRNA-26a (miR-26a). Exo@miR-26a-integrated hydrogels significantly promoted bone regeneration when implanted into defect sites; as the exosome stimulated angiogenesis, miR-26a promoted osteogenesis while the hydrogel enabled a site-directed release. Moreover, BMSC-derived exosomes further facilitated healthy bone regeneration by repressing osteoclast differentiation-related genes rather than damaging osteoclasts. Taken together, our findings demonstrate the promising potential of Exo@miR-26a for bone regeneration and provide a new strategy for the application of miRNA therapy in tissue engineering.

Hydrogel Drug Delivery Systems for Bone Regeneration

With the in-depth understanding of bone regeneration mechanisms and the development of bone tissue engineering, a variety of scaffold carrier materials with desirable physicochemical properties and biological functions have recently emerged in the field of bone regeneration. Hydrogels are being increasingly used in the field of bone regeneration and tissue engineering because of their biocompatibility, unique swelling properties, and relative ease of fabrication. Hydrogel drug delivery systems comprise cells, cytokines, an extracellular matrix, and small molecule nucleotides, which have different properties depending on their chemical or physical cross-linking. Additionally, hydrogels can be designed for different types of drug delivery for specific applications. In this paper, we summarize recent research in the field of bone regeneration using hydrogels as delivery carriers, detail the application of hydrogels in bone defect diseases and their mechanisms, and discuss future research directions of hydrogel drug delivery systems in bone tissue engineering.

Can a low dosage of recombinant human bone morphogenetic protein-2 loaded on collagen sponge induce ectopic bone?

Recombinant human bone morphogenetic protein-2 (rhBMP-2) is one of the growth factors that may induce the formation of new bone. The aim was to determine the efficacy of low doses of rhBMP-2 for bone regeneration using a collagen sponge as a carrier. Three doses of rhBMP-2 (1.167, 0.117, and 0.039 mg/mL) were combined with an absorbable collagen sponge (ACS) as a delivery vehicle. The rhBMP-2/ACS implants were placed in the subcutaneous tissues of rat backs. X-ray microcomputed tomography (micro-CT) and histological analysis were used to evaluate bone formation. The samples treated with 1.167 mg/mL of rhBMP-2 showed greater bone formation than the samples treated with 0.117 mg/mL of rhBMP-2 four weeks after surgery. However, there was no evidence of bone formation in the samples that were treated with 0.039 mg/mL of rhBMP-2. It was found that rhBMP-2 was osteogenic even at one-tenth of its manufacturer's recommended concentration (1.167 mg/mL), indicating its potential for clinical use at lower concentrations.

Improving Bone Formation by Guided Bone Regeneration Using a Collagen Membrane with rhBMP-2: A Novel Concept

We examined whether recombinant human bone morphogenetic protein-2 (rhBMP-2) when applied to collagen membranes, would reinforce them during guided bone regeneration. Four critical cranial bone defects were created and treated in 30 New Zealand white rabbits, including a control group, critical defect only; group 1, collagen membrane only; group 2, biphasic calcium phosphate (BCP) only; group 3, collagen membrane + BCP; group 4, collagen membrane with rhBMP-2 (1.0 mg/mL); group 5, collagen membrane with rhBMP-2 (0.5 mg/mL); group 6, collagen membrane with rhBMP-2 (1.0 mg/mL) + BCP; and group 7, collagen membrane with rhBMP-2 (0.5 mg/mL) + BCP. After a 2-, 4-, or 8-week healing period, the animals were sacrificed. The combination of collagen membranes with rhBMP-2 and BCP yielded significantly higher bone formation rates compared to the other groups (control group and groups 1-5 < groups 6 and 7; p < 0.05). A 2-week healing period yielded significantly lower bone formation than that at 4 and 8 weeks (2 < 4 = 8 weeks; p < 0.05). This study proposes a novel GBR concept in which rhBMP-2 is applied to collagen membranes outside instead of inside the grafted area, thereby inducing quantitatively and qualitatively enhanced bone regeneration in critical bone defects.

A review of conventional and emerging technologies for hydrogels sterilization

Hydrogels are extensively used in the biomedical field, as drug delivery systems, wound dressings, contact lenses or as scaffolds for tissue engineering. Due to their polymeric nature and the presence of high amounts of water in their structure, hydrogels generally present high sensitivity to terminal sterilization. The establishment of an efficient sterilization protocol that does not compromise the functional properties of the hydrogels is one of the challenges faced by researchers when developing a hydrogel for a specific application. Yet, until very recently this aspect was largely ignored in the literature. The present paper reviews the state of literature concerning hydrogels sterilization, compiling the main findings. Conventional terminal sterilization methods (heat sterilization, radiation sterilization, and gas sterilization) as well as emerging sterilization techniques (ozone, supercritical carbon dioxide) are covered. Considerations about aseptic processing are also included. Additionally, and as a framework, hydrogels' polymeric materials, types of networks, and main biomedical applications are summarily described.

Magnetic nanocomposites for magneto-promoted osteogenesis: from simulation auxiliary design to experimental validation

Magnetically actuated mechanical stimulation, as a novel form of intelligent responsive force stimulation, has a great potential for remote spatiotemporal regulation of a variety of life processes. Hence, the optimal design of magnetic nanomaterials for generating magneto-mechanical stimuli becomes an important driving force in the development of magneto-controlled biotherapy. This study aims to clarify the general rule that the surface modification amount of magnetic nanoparticles (NPs) affects the biological behavior (e.g., cell adhesion, proliferation and differentiation) of pre-osteoblast cells. First of all, course-grained molecular dynamics simulations predict that 23.3% graft modification of the NPs can maximize the heterogeneity of the dynamics of the polymer matrix, which may generate enhanced mechanical stimuli. Then, experimentally, iron oxide (IO) NPs grafted with different amounts of poly(γ-benzyl-L-glutamate) (PBLG) were prepared to obtain homogeneous magnetic nanocomposites with improved mechanical properties. Further in vitro cell experiments demonstrate that the grafting amounts of 21.46% and 32.34% of PBLG on IO NPs are the most beneficial for the adhesion and osteogenic differentiation of cells. Simultaneously, the maximized upregulation of the Piezo1 gene indicates that the cells receive the strongest magneto-mechanical stimuli. The consistent conclusion of the experiments and simulations indicates that 20-30% PBLG grafted on the IO surface could maximize the ability of magnetic stimuli to regulate the biological behavior of the cells, which validates the feasibility of simulation auxiliary material design and is of great importance for promoting the application of magneto-controlled biotherapy in bioengineering and biomedicine.

Regulating macrophage-MSC interaction to optimize BMP-2-induced osteogenesis in the local microenvironment

Bone morphogenetic protein (BMP-2) has been approved by the FDA to promote bone regeneration, but uncertain osteogenic effect and dose-dependent side effects may occur. Osteoimmunomodulation plays an important role in growth factor-based osteogenesis. Here, we explored how proinflammatory signals affect the dose-dependent osteogenic potential of BMP-2. We observed that the expression level of local IL-1β did not increase with the dose of BMP-2 in the mouse osteogenesis model. A low dose of BMP-2 could not promote new bone formation, but trigger the release of IL-1β from M1 macrophages. As the dose of BMP-2 increased, the IL-1β expression and M1 infiltration in local microenvironment were inhibited by IL-1Ra from MSCs under osteogenic differentiation induced by BMP-2, and new bone tissues formed, even excessively. Anti-inflammatory drugs (Dexamethasone, Dex) promoted osteogenesis via inhibiting M1 polarization and enhancing BMP-2-induced MSC osteo-differentiation. Thus, we suggest that the osteogenic effect of BMP-2 involves macrophage-MSC interaction that is dependent on BMP-2 dose and based on IL-1R1 ligands, including IL-1β and IL-1Ra. The dose of BMP-2 could be reduced by introducing immunoregulatory strategies.

BMP-2 functional polypeptides relieve osteolysis via bi-regulating bone formation and resorption coupled with macrophage polarization

Osteolysis caused by wear debris around the prosthesis is the main reason for aseptic loosening. Extending prosthetic service life is still challenging. In this study, we first synthesized a bone morphogenetic protein-2 (BMP-2) functional polypeptide (BMP2pp), and evaluated the effects of BMP2pp on macrophage polarization and impaired osteogenesis caused by titanium (Ti) particles in vitro. Then, we delineated the impact of BMP2pp on bone formation and resorption in a mouse calvarial bone osteolysis model induced by Ti particles. The results showed that BMP2pp not only alleviated the Ti-induced inhibition of osteoblastic differentiation in human placenta-derived mesenchymal stem cells (hPMSCs) but also prevented Ti-induced M1 macrophage polarization and promoted M2 macrophage differentiation in mice. Conditioned medium from BMP2pp-activated macrophages increased the osteogenesis of hPMSCs. The western blot results indicated a significant decrease in the expression of NF-κB inducing kinase (NIK) and phospho-NF-κB p65 in bone marrow-derived macrophages treated with BMP2pp. Furthermore, we clarified the protective effect of BMP2pp on bone formation and the reduction in bone resorption coupled with the immunomodulatory properties of calvarial osteolysis in mice. In summary, BMP2pp ameliorated the Ti-mediated impairment in osteogenic potential of hPMSCs, suppressed the M1 polarization of macrophages by inhibiting the activation of the NF-κB signaling pathway, and ameliorated Ti-induced bone osteolysis. Our research suggests that BMP2pp may be a potential option for treating prosthetic loosening induced by wear debris from prostheses.

The optimal scaffold for silk sericin-based bone graft: collagen versus gelatin

BACKGROUND

Silk sericin is an active ingredient in bone grafts. However, the optimal scaffold for silk sericin has yet to be identified.

METHOD

A critical-sized bone defect model in rat calvaria was used to evaluate bone regeneration. Silk sericin from Yeonnokjam, Bombyx mori, was incorporated into gelatin (group G, n = 6) and collagen (group C, n = 6). Bone regeneration was evaluated using micro-computed tomography (mCT) and histology.

RESULTS

Group C showed a larger bone volume than group G in the mCT analysis (P = 0.001). Histological analysis showed a larger area of bony defects in group G than in group C. The bone regeneration area in group C was significantly larger than that in group G (P = 0.003).

CONCLUSION

Compared with gelatin, collagen shows better bone regeneration in silk sericin-based bone grafts.

Advances in bone regeneration with growth factors for spinal fusion: A literature review

Bone tissue is regenerated via the spatiotemporal involvement of various cytokines. Among them, the bone morphogenetic protein (BMP), which plays a vital role in the bone regeneration process, has been applied clinically for the treatment of refractory orthopedic conditions. Although BMP therapy using a collagen carrier has shown efficiency in bone regeneration over the last two decades, a major challenge-considerable side effects associated with the acute release of high doses of BMPs-has also been revealed. To improve BMP efficiency, the development of new carriers and biologics that can be used in conjunction with BMPs is currently underway. In this review, we describe the current status and future prospects of bone regeneration therapy, with a focus on BMPs. Furthermore, we outline the characteristics and molecular signaling pathways involving BMPs, clinical applications of BMPs in orthopedics, clinical results of BMP use in human spinal surgeries, drugs combined with BMPs to provide synergistic effects, and novel BMP carriers.

MOF-derived CuO@ZnO modified titanium implant for synergistic antibacterial ability, osteogenesis and angiogenesis

Surface modification of titanium implants with antibacterial, osteogenic and even angiogenic capabilities are essential to enhance their clinical applicability. Herein, metal-organic framework (MOF) derived CuO@ZnO composite was grafted onto the polydopamine (PDA) modified titanium alloy to achieve vascularized bone regeneration. The CuO@ZnO-coated titanium effectively inhibits the formation of bacterial biofilms and the sterilization rate of Staphylococcus aureus (S. aureus) reaches 99%. Benefitting from the intrinsic porous architecture of MOFs, the Zn2+ and Cu2+ could be controllably released to facilitate the production of excess intracellular reactive oxygen species (ROS) inside the bacteria, which ensures the excellent antibacterial performance of the composite coating. The CuO@ZnO-coated titanium also exhibits good cytocompatibility, effectively promotes the adhesion and proliferation of the human bone marrow mesenchymal stem cells (hBMSCs) and reduces the level of the cell apoptosis. The up-regulated expression of the osteogenesis-related genes and the superior extracellular matrix mineralization reveals that the CuO@ZnO coating possesses fantastic osteoinductive properties. In addition, the transwell and tube formation assays of the human umbilical vein endothelial cells (HUVECs) suggest the superior angiogenesis ability of the CuO@ZnO-coated titanium. The released Cu2+ stimulated the angiogenesis of the HUVECs in vitro by up-regulating the expression of the vascular endothelial growth factor (VEGF). These findings will provide new insight into the development of multifunctional titanium implants for clinical applications.

Investigation into self-assembled collagen arrays guided by the surface properties of polyimide films

The mechanism of highly-oriented collagen (Col) fibril arrays on rubbed polyimide (PI) films was investigated in order to understand the interfacial Col-PI interactions. It was found that the orientation of the surface functional groups of the rubbed PI films was most effectively controlled and optimized by the rubbing conditions. In particular, nano-grooves with a width of 100-600 nm and a depth of 2-10 nm were formed on the rubbed PI films at a rubbing strength of 2.4 m, leading to the formation of the highest density of the Col fibril array. Moreover, highly-oriented Col fibrils were formed inside the nano-grooves by the formation of hydrogen bonds between the CO of the imide groups (@ rubbed PI films) and the N-H of the amino groups (@ β-Sheets of Col molecules), resulting in the orientation of the Col molecules and subsequent assembly to the fibrils. Thus, the orientation and density of the fibril arrays on the rubbed PI films were successfully controlled by the interfacial interactions between the β-Sheet component of Col and the nano-groove surfaces of the rubbed PI films. Therefore, the novel technology of this study will provide an effective method to fabricate the one-directional fibrous nanostructures and to understand how to control the orientation of biomolecules in vitro.

Rubbing-Assisted Approach for Fabricating Oriented Nanobiomaterials

The highly-oriented structures in biological tissues play an important role in determining the functions of the tissues. In order to artificially fabricate oriented nanostructures similar to biological tissues, it is necessary to understand the oriented mechanism and invent the techniques for controlling the oriented structure of nanobiomaterials. In this review, the oriented structures in biological tissues were reviewed and the techniques for producing highly-oriented nanobiomaterials by imitating the oriented organic/inorganic nanocomposite mechanism of the biological tissues were summarized. In particular, we introduce a fabrication technology for the highly-oriented structure of nanobiomaterials on the surface of a rubbed polyimide film that has physicochemical anisotropy in order to further form the highly-oriented organic/inorganic nanocomposite structures based on interface interaction. This is an effective technology to fabricate one-directional nanobiomaterials by a biomimetic process, indicating the potential for wide application in the biomedical field.

Naringin Release from a Nano-Hydroxyapatite/Collagen Scaffold Promotes Osteogenesis and Bone Tissue Reconstruction

Bone fractures and defects are a major health issue and have reportedly affected over 455 million individuals globally to date. Bone tissue engineering has gained great success in bone defect repair and bone reconstruction based on the use of nano-hydroxyapatite (nHA) or collagen (COL). Both nHA and COL exhibit osteogenic induction capacity to support bone tissue regeneration; however, the former suffers from poor flexibility and the latter lacks mechanical strength. Biological scaffolds created by combining nHA and COL (nHA/COL) can overcome the drawbacks imposed by individual materials and, therefore, have become widely applied in tissue engineering. The composite scaffolds can further promote tissue reconstruction by allowing the loading of various growth factors. Naringin (NG) is a natural flavonoid. Its molecular weight is 580.53 Da, lower than that of many growth factors, and it causes minimal immune responses when being introduced in vivo. In addition, naringin is safe, non-toxic, inexpensive to produce, and has superior bio-properties. In this study, we introduced NG into a nHA/COL scaffold (NG/nHA/COL) and exploited the potentials of the NG/nHA/COL scaffold in enhancing bone tissue regeneration. NG/nHA/COL scaffolds were fabricated by firstly combining nHA and collagen at different compositional ratios, followed by NG encapsulation. NG release tests showed that the scaffold with a nHA/COL mass ratio of 7:3 exhibited the optimal property. The in vitro cell study showed the desirable biocompatibility of the NG/nHA/COL scaffold, and its effective promotion for the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs), as proved by an increased alkaline phosphatase (ALP) activity, the formation of more calcium nodules, and a higher expression of osteogenic-related genes involving Osteocalcin (OCN), BMP-2, and Osteopontin (OPN), compared with the control and nHA/COL groups. When administered into rats with skull defects, the NG/nHA/COL scaffold significantly promoted the reconstruction of bone tissues and the early repair of skull defects, indicating the great potential of NG/nHA/COL scaffolds in bone tissue engineering.

Immunomodulation Effect of Biomaterials on Bone Formation

Traditional bone replacement materials have been developed with the goal of directing the osteogenesis of osteoblastic cell lines toward differentiation and therefore achieving biomaterial-mediated osteogenesis, but the osteogenic effect has been disappointing. With advances in bone biology, it has been revealed that the local immune microenvironment has an important role in regulating the bone formation process. According to the bone immunology hypothesis, the immune system and the skeletal system are inextricably linked, with many cytokines and regulatory factors in common, and immune cells play an essential role in bone-related physiopathological processes. This review combines advances in bone immunology with biomaterial immunomodulatory properties to provide an overview of biomaterials-mediated immune responses to regulate bone regeneration, as well as methods to assess the bone immunomodulatory properties of bone biomaterials and how these strategies can be used for future bone tissue engineering applications.

It's the Biology Orthopods! Heralding a Reconstructive Revolution Through Musculoskeletal Tissue Banks (MSTB) in India

BACKGROUND

A tissue bank is an establishment that aids in retrieval, processing, storage, and distribution  of human tissue for transplantation. For many years, such banks have been dispensing tissue to orthopaedic surgeons, performing reconstructive surgeries.

METHODOLOGY

The retrieval, preparation, and delivery of musculoskeletal tissue used for transplantation is an intricate process  involving varying practices among different musculoskeletal tissue banks.

RESULTS

Musculoskeletal allografts are used in various orthopaedic surgeries ranging from primary bone defects, trauma, and carcinoma to congenital disabilities. Every decade brings in paradigm shifts and new hope for treating challenging cases with the aid of newer devices and materials.

CONCLUSION

This review article outlines various technical, regulatory and quality enhancement steps involved in tissue banking. Also, it discusses the road ahead and the research avenues for developing novel allograft products with the synergy of tissue banks and clinicians.

SUPPLEMENTARY INFORMATION

The online version contains supplementary material available at 10.1007/s43465-022-00661-0.

Immediate Tooth Autotransplantation with Root Canal Filling and Partially Demineralized Dentin/Cementum Matrix into Congenital Missing Tooth Region

This clinical report describes immediate tooth auto-transplantation with an autograft of partially demineralized dentin/cementum matrix (pDDM), based on an orthodontic treatment plan for a 16-year-old male patient with a congenital missing tooth (#45). First, vital teeth (#14, #24) were extracted, and root canal filling (#14) was immediately performed with the support of a fixation device. Simultaneously, the tooth (#24) was crushed in an electric mill for 1 min, and the crushed granules were partially demineralized in 2% HNO₃ solution for 20 min as the graft material. Next, the donor tooth was transplanted into the created socket (#45), and stabilized using an enamel bonding agent. The wet pDDM was loaded into the location of the congenital missing tooth, and the flap was repositioned. The bonding agent for stabilization was removed at 28 days, and also small contact points between the transplanted tooth and the upper premolar (#14) were added using photopolymerizable composite resin. X-ray photos were taken sequentially, and there were no postoperative complications. The radiographic images showed that the periodontal ligament space and alveolar ridge line could be observed at 18 months. The pDDM was harmonized with the mandible, and the remodeled bone-like shadow was observed in the graft region. We concluded that immediate tooth transplantation with root canal fillings and autogenous pDDM may be a valuable alternative to dental implanting or bridge formation for patients with a congenital missing tooth, followed by orthodontic treatment.

Precisely Localized Bone Regeneration Mediated by Marine-Derived Microdroplets with Superior BMP-2 Binding Affinity

Prompt and robust bone regeneration has been clinically achieved using supraphysiological doses of bone morphogenetic protein-2 (BMP-2) to overcome the short half-life and rapid clearance. However, uncontrolled burst release of exogenous BMP-2 causes severe complications such as heterotopic ossification and soft tissue inflammation. Therefore, numerous researches have focused on developing a new BMP-2 delivery system for a sustained release profile by immobilizing BMP-2 in various polymeric vehicles. Herein, to avoid denaturation of BMP-2 and enhance therapeutic action via localized delivery, a complex coacervate consisting of fucoidan, a marine-derived glycosaminoglycan, and poly-l-lysine (PLL) is fabricated. Superior BMP-2 binding ability and electrostatic interaction-driven engulfment enable facile and highly efficient microencapsulation of BMP-2. The microencapsulation ability of the coacervate significantly improves BMP-2 bioactivity and provides protection against antagonist and proteolysis, while allowing prolonged release. Moreover, BMP-2 containing coacervate is coated on conventional collagen sponges. The bioactivity and localized bone regenerating ability are confirmed through in vitro (human-derived stem cells), and in vivo (calvarial bone defect model) evaluations.

Bilayer silk fibroin/sodium alginate scaffold promotes vascularization and advances inflammation stage in full-thickness wound

An ideal wound dressing for full-thickness wound regeneration should offer desirable biocompatibility, adequate mechanical properties, barrier function, and cellular regulation. Here, a bilayer scaffold resembling the hierarchical structure of human skin was developed using silk fibroin and sodium alginate. The upper membrane was prepared through casting and functioned as the epidermis, whereas the lower porous scaffold was prepared by freeze-drying and mimicked extracellular matrix structures. The membrane had nonporous structure, desirable mechanical properties, moderate hydrophilic surface, and suitable water vapor transmission rate, whereas the porous scaffold revealed 157.61 ± 41.67 µm pore size, 86.10 ± 3.60% porosity, and capability of stimulating fibroblast proliferation. The combination of the two structures reinforced the tensile strength by 5-fold and provided protection from wound dehydration. A suitable degradation rate reduced potential administration frequency. Furthermore, an in vivo rabbit full-thickness wound healing test demonstrated that the bilayer scaffold facilitated wound closure, granulation tissue formation, re-epithelialization and skin component transition towards normal skin by providing a moist wound environment, advancing the inflammation stage, and stimulating angiogenesis. Collectively, as an off-the-shelf and cell-free wound dressing with single topical administration, the bilayer scaffold is a promising wound dressing for full-thickness wound regeneration.

Comparison of rhBMP-2 in Combination with Different Biomaterials for Regeneration in Rat Calvaria Critical-Size Defects

Regeneration of critical bone defects requires the use of biomaterials. The incorporation of osteoinductive agents, such as bone morphogenetic proteins (BMPs), improves bone formation. This study aimed to compare the efficacy of rhBMP-2 in combination with different materials for bone regeneration in critical-sized rat calvarial defects. This was an experimental animal study using 30 rats. In each rat, two 5-mm critical-size defects were made in the calvaria (60 bone defects in total) using a trephine. All rats were randomized to one of the six groups: control (C), autograft + rhBMP-2 (A), absorbable collagen sponge + rhBMP-2 (ACS), β-tricalcium phosphate + rhBMP-2 (B-TCP), bovine xenograft + rhBMP-2 (B), and hydroxyapatite + rhBMP-2 (HA). The outcome was assessed after 4 and 8 weeks using histological description and the histological bone healing scale. Statistical analysis was performed using the Kruskal-Wallis and Mann–Whitney U tests, with a p-value set at 0.05. The average bone healing scores per group were as follows: C group, 12.5; A group, 26.5; ACS group, 18.8; B-TCP group, 26.2; HA group, 20.9; and B group, 20.9. The C group showed a significant difference between weeks 4 and 8 (p = 0.032). Among the 4-week groups, the C group showed a significant difference compared to A (p = 0.001), ACS (p = 0.017), and B-TCP (p = 0.005) groups. The 8-week experimental group did not show any significant differences between the groups. The 5-mm critical size defect in rat calvaria requires the use of bone biomaterials to heal at 4 and 8 weeks. rhBMP-2, as applied in this study, showed no difference in new bone formation when combined with bovine, B-TCP, or HA biomaterials.

Polyethylene terephthalate textile heart valve: How poly(ethylene glycol) grafting limits fibrosis

Transcatheter aortic valve replacement (TAVR) is an alternative technique to surgical valve replacement for over 300,000 patients worldwide. The valve material used in the TAVR is made of biological tissues, whose durability remains unknown. The success of the TAVR favors the research toward synthetic valve leaflet materials as an alternative to biological tissues. In particular, polyethylene terephthalate (PET) textile valves have recently proven durability over a 6-month period in animal sheep models. Excessive fibrotic tissue formation remains, however, a critical issue to be addressed. The aim of this work was therefore to investigate the potential of PET textiles covalently conjugated with polyethylene glycol (PEG), known for its antifouling properties, to modulate the fibrosis formation both in vitro and in vivo. For this purpose, the surfaces of heart valves made of PET textiles were functionalized with an atmospheric pressure plasma, leading to the formation of carboxylic acid (COOH) groups, further used for PEG-NH₂ conjugation. Surface modification efficiency was assessed by X-ray photoelectron spectroscopy and water contact angle measurements. The biological behavior of the as-modified surfaces was evaluated by in vitro assays, using rat cardiac fibroblast cells. The results show that PEG treated substrates restrained the fibroblasts adhesion and proliferation. The PEG treated valve, implanted in a juvenile sheep model, showed a significant fibrosis reduction. The explant also revealed calcification issues that need to be addressed.

Effectively improved 3-dimensional structural stability of atelocollagen-gelatin sponge biomaterial by heat treatment

Atelocollagen-gelatin (ACG) sponge was fabricated from atelocollagen and gelatin by lyophilization without introducing toxic substances. This study aimed to investigate the effects of heat treatment on the 3-dimensional structural stability of ACG sponge biomaterial. ACG sponge samples were fabricated and heat treated at 125^oC for 12 h in the vacuum. The results revealed that heat treatment did not affect porosity, pore size and mechanical compressive strength. Heat-treated ACG sponge showed decreased absorbance and peak shift of amid I (C=O) stretches, slightly higher water uptake degree and significantly decreased in vitro degradation rate. Moreover, heat-treated ACG sponge maintained good 3-dimensional surface morphology and porous microstructure throughout 7 days, while non-heat-treated ACG sponge collapsed in less than 24 h. The human mesenchymal stromal cells (hMSCs) were shown to adhere and grow well on heat-treated ACG sponges. These results indicate that heat treatment is effective and safe to stabilize 3-dimensional ACG sponge biomaterial for tissue engineering.

Amelotin Promotes Mineralization and Adhesion in Collagen-Based Systems

Introduction

Periodontitis is characterized by the destruction of tooth-supporting tissues including the alveolar bone. Barrier membranes are used in dentistry for tissue regenerative therapy. Nevertheless, conventional membranes have issues related to membrane stability and direct induction of bone mineralization. Amelotin (AMTN), an enamel matrix protein, regulates hydroxyapatite crystal nucleation and growth. To apply an AMTN membrane in clinical practice, we investigated the mineralizing and adhesive effects of recombinant human (rh) AMTN in vitro using a collagen-based system.

Methods

Collagen hydrogel incorporated with rhAMTN (AMTN gel) and rhAMTN-coated dentin slices were prepared. AMTN gel was then applied on a commercial membrane (AMTN membrane). Samples were incubated for up to 24 h in mineralization buffer, and the structures were observed. The peak adhesive tensile strength between the dentin and AMTN membrane was measured. Using an enzyme-linked immunosorbent assay, the release kinetics of rhAMTN from the membrane were investigated.

Results

The AMTN gel resulted in the formation of hydroxyapatite deposits both onto and within the collagen matrix. Furthermore, coating the dentin surface with rhAMTN promoted the precipitation of mineral deposits on the surface. Interestingly, site-specific mineralization was observed in the AMTN membrane. Only 1% of rhAMTN was released from the membrane. Hence, the AMTN membrane adhered to the dentin surface with more than twofold greater tensile strength than that detected for a rhAMTN-free barrier membrane.

Conclusions

RhAMTN can accelerate mineralization and adhesion in collagen-based systems. Furthermore, the AMTN membrane could inform the optimal design of calcified tissue regenerative materials.

Supplementary Information

The online version contains supplementary material available at 10.1007/s12195-022-00722-2.

Top 50 Cited Bone Graft Orthopedic Papers

The purpose of this research is to recognize the highest 50 most-mentioned articles in the literature concentrating on bone grafts. That has been accomplished with the use of the Scopus database and the search slogan "bone grafts," and we inquired for the 50 most-cited articles on bone grafting. The study was completed in September 2020. We investigated the articles issued between 1970 and 2020. The articles were organized and classified based on the total number of citations. We appraised the following information relating to each article: first author, year of publication, journal, and title.

A total of 1,580 studies matched our search standards, of which the 50 most-cited extended between 1,862 and 403 citations. Seven articles were cited more than 1,000 times. The article by Marx et al. was the maximum-cited article, with 1,862 citations, followed by Younger et al.'s with 1,461 and Giannoudis et al.'s with 1,245. The majority of the studies originated from the United States (n = 30) and were published in the 2000s. Biomaterials was the most regular destination journal (n = 8), followed by the Journal of Bone and Joint Surgery American series (n = 7). A maximum of the articles focused on the different types of bone grafts and their alternatives including bone tissue engineering (n=29). Our investigation of the highest 50 articles linking to bone grafting has emphasized the most significant papers in the field. These cover a wide-ranging variety of topics including types, management, and mechanism of action of bone grafts. To recognize the present treatment guidelines and how the use of bone grafting has grown, it is vital to know the most-cited articles relating to this grafting.

Using scaffolds as drug delivery systems to treat bone tumor

Surgery is the principal strategy to treat osteosarcoma and other types of bone tumors, but it causes bone defects that cannot be healed spontaneously. After surgery, patients still need to receive radiotherapy and/or chemotherapy to prevent tumor recurrence and metastasis, which leads to systemic side effects. Bone scaffolds exhibit the potentials to load cargos (drugs or growth factors) and act as drug delivery systems (DDSs) in the osteosarcoma postoperative treatment. This review introduces current types of bone scaffolds and highlights representative works using scaffolds as DDSs to treat osteosarcomas. Challenges and perspectives in the scaffold-based DDSs are also discussed. This review may provide references to develop effective and safe strategies for osteosarcoma postoperative treatment.

Periodontal Wound Healing and Regeneration: Insights for Engineering New Therapeutic Approaches

Periodontitis is a widespread inflammatory disease that leads to loss of the tooth supporting periodontal tissues. The few therapies available to regenerate periodontal tissues have high costs and inherent limitations, inspiring the development of new approaches. Studies have shown that periodontal tissues have an inherent capacity for regeneration, driven by multipotent cells residing in the periodontal ligament (PDL). The purpose of this review is to describe the current understanding of the mechanisms driving periodontal wound healing and regeneration that can inform the development of new treatment approaches. The biologic basis underlying established therapies such as guided tissue regeneration (GTR) and growth factor delivery are reviewed, along with examples of biomaterials that have been engineered to improve the effectiveness of these approaches. Emerging therapies such as those targeting Wnt signaling, periodontal cell delivery or recruitment, and tissue engineered scaffolds are described in the context of periodontal wound healing, using key in vivo studies to illustrate the impact these approaches can have on the formation of new cementum, alveolar bone, and PDL. Finally, design principles for engineering new therapies are suggested which build on current knowledge of periodontal wound healing and regeneration.

Efficacy of hyaluronic acid, absorbable collagen sponge, and their combination in minimizing bisphosphonate-related osteonecrosis of the jaws (BRONJ) after dental extraction: a preliminary animal histomorphometric study

Introduction

There is no study on the effectiveness of hyaluronic acid (HA) placement either with or without absorbable collagen sponge (ACS) in reducing or preventing bisphosphonate-related osteonecrosis of the jaws (BRONJ). This preliminary animal study examined the efficacy of this clinically important treatment.

Methods

For simulating BRONJ, zoledronic acid was administered to 40 rats for 5 weeks. Two weeks later, a right first molar was extracted from each rat. The rats were randomized into four groups of socket treatments: control (empty extraction socket) or with sockets filled with ACS, HA, or HA+ACS (n=4×10). After 2 weeks, 5 rats in each group were sacrificed and subjected to histopathologic and histomorphometric evaluation. Eight weeks post-surgically, the rest of rats were euthanized and histologically examined. The Kruskal-Wallis test was used to compare the four treatments at each time point (α=0.05).

Results

Six rats were lost overall. In the second week, vascularization was higher in ACS group (P<0.05); osteoclast activity was not different between groups (P>0.05); empty lacunae were the most and fewest in control and HA+ACS groups, respectively (P<0.05); eosinophil infiltration was maximum in HA group (P<0.05); lymphocyte counts were maximum and minimum in the HA+ACS and ACS groups, respectively (P<0.05); the highest and lowest neutrophil counts were seen in ACS and control groups, respectively (P<0.05); and the extent of live bone did not differ between groups (P>0.05). In the eighth week, vascularization was not different in groups (P>0.05); the highest and lowest osteoclast activities were seen in the control and HA+ACS groups, respectively (P<0.05); empty lacunae were the most and fewest in control and HA+ACS, respectively (P<0.05); maximum and minimum numbers of eosinophils were in control and HA+ACS groups, respectively (P<0.05); HA and control groups exhibited the highest and lowest lymphocyte counts, respectively (P<0.05); the lowest and highest neutrophil counts were observed in HA+ACs and control groups, respectively (P<0.05); and the highest and lowest extents of the live bone were observed in HA+ACS and control groups, respectively (P<0.05).

Conclusions

Within the limitations of this preliminary animal study, HA and especially HA+ACS seem a proper method for preventing or treating BRONJ.

In situ mineralized PLGA/zwitterionic hydrogel composite scaffold enables high-efficiency rhBMP-2 release for critical-sized bone healing

Osteoconductive and osteoinductive scaffolds are highly desirable for functional restoration of large bone defects. Here, we report an in situ mineralized poly(lactic-co-glycolic acid)/poly[2-(methacryloyloxy)ethyl]dimethyl-(3-sulfopropyl)ammonium hydroxide hydrogel (PLGA/PSBMA) scaffold as a novel high-efficiency carrier for recombinant human bone morphogenetic protein-2 (rhBMP-2) for bone tissue regeneration. By virtue of the oppositely charged structure, the zwitterionic PSBMA component is able to template well-integrated dense mineralization of calcium phosphate throughout the PLGA/PSBMA scaffold. The high affinity between rhBMP-2 and the mineralized matrix, combined with the capability of the zwitterionic hydrogel to sequester and to enable sustained release of ionic proteins, endows the mineralized PLGA/PSBMA scaffolds with high-efficiency sustained release of rhBMP-2 (only 1.7% release within 35 days), thus enabling robust healing of critical-sized (5 mm) nonunion calvarial defects in rats at an ultralow dosage of rhBMP-2 (150 ng per scaffold), at which level successful healing of critical-sized bone defects has never been reported. These findings show that the mineralized PLGA/PSBMA scaffold is promising for bone defect repair.

Spatiotemporal regulation of angiogenesis/osteogenesis emulating natural bone healing cascade for vascularized bone formation

Engineering approaches for growth factor delivery have been considerably advanced for tissue regeneration, yet most of them fail to provide a complex combination of signals emulating a natural healing cascade, which substantially limits their clinical successes. Herein, we aimed to emulate the natural bone healing cascades by coupling the processes of angiogenesis and osteogenesis with a hybrid dual growth factor delivery system to achieve vascularized bone formation. Basic fibroblast growth factor (bFGF) was loaded into methacrylate gelatin (GelMA) to mimic angiogenic signalling during the inflammation and soft callus phases of the bone healing process, while bone morphogenetic protein-2 (BMP-2) was bound onto mineral coated microparticles (MCM) to mimics osteogenic signalling in the hard callus and bone remodelling phases. An Initial high concentration of bFGF accompanied by a sustainable release of BMP-2 and inorganic ions was realized to orchestrate well-coupled osteogenic and angiogenic effects for bone regeneration. In vitro experiments indicated that the hybrid hydrogel markedly enhanced the formation of vasculature in human umbilical vein endothelial cells (HUVECs), as well as the osteogenic differentiation of mesenchymal stem cells (BMSCs). In vivo results confirmed the optimal osteogenic performance of our F/G-B/M hydrogel, which was primarily attributed to the FGF-induced vascularization. This research presents a facile and potent alternative for treating bone defects by emulating natural cascades of bone healing.

The influence of periostin on osteoblastic adhesion and proliferation on collagen matrices - An in vitro study

Purpose:

The purpose of the study was to evaluate the ability of periostin when impregnated onto varied collagen matrices to influence osteoblast cell adhesion, proliferation, and activity.

Materials and Methods:

Saos-2 osteoblast cells were cultured and seeded onto two different collagen matrices as follows: Group A: absorbable collagen sponge (ACS), Group B: ACS impregnated with recombinant human periostin, Group C: nanocrystalline hydroxyapatite collagen (NcHC), and Group D: NcHC impregnated with recombinanant human periostin. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay was performed to evaluate cell viability as well as adhesion and proliferation on 2^nd, 5^th, and 7^th day. Osteoblast activity was studied using alkaline phosphatase (ALP) assay for the study groups.

Results:

The periostin-treated absorbable collagen matrices showed a statistically significant increase in the osteoblast adhesion compared to periostin-treated NcHC on days 2, 5, and 7 (P < 0.001). The osteoblast activity as evaluated by ALP assay showed that there is increased activity in the periostin-treated ACS compared to the periostin-treated NcHC.

Conclusion:

From the observations of this study, it is evident that Periostin has a significant role in the modulating cellular response of the osteoblast cells. Further, incorporation of periostin into the ACS has been shown to increase the cell viability, proliferation, and adhesion of osteoblast-like Saos-2 cells.

Collagen-based biocomposites inspired by bone hierarchical structures for advanced bone regeneration: ongoing research and perspectives

Bone is a hard-connective tissue composed of matrix, cells and bioactive factors with a hierarchical structure, where the matrix is mainly composed of type I collagen and hydroxyapatite. Collagen fibers assembled by collagen are the template for mineralization and make an important contribution to bone formation and the bone remodeling process. Therefore, collagen has been widely clinically used for bone/cartilage defect regeneration. However, pure collagen implants, such as collagen scaffolds or sponges, have limitations in the bone/cartilage regeneration process due to their poor mechanical properties and osteoinductivity. Different forms of collagen-based composites prepared by incorporating natural/artificial polymers or bioactive inorganic substances are characterized by their interconnected porous structure and promoting cell adhesion, while they improve the mechanical strength, structural stability and osteogenic activities of the collagen matrix. In this review, various forms of collagen-based biocomposites, such as scaffolds, sponges, microspheres/nanoparticles, films and microfibers/nanofibers prepared by natural/synthetic polymers, bioactive ceramics and carbon-based materials compounded with collagen are reviewed. In addition, the application of collagen-based biocomposites as cytokine, cell or drug (genes, proteins, peptides and chemosynthetic) delivery platforms for proangiogenesis and bone/cartilage tissue regeneration is also discussed. Finally, the potential application, research and development direction of collagen-based biocomposites in future bone/cartilage tissue regeneration are discussed.

Bone marrow mesenchymal stem cells with low dose bone morphogenetic protein 2 enhances scaffold-based spinal fusion in a porcine model

High doses bone morphogenetic protein 2 (BMP-2) have resulted in a series of complications in spinal fusion. We previously established a polyelectrolyte complex (PEC) carrier system that reduces the therapeutic dose of BMP-2 in both rodent and porcine spinal fusion models. This study aimed to evaluate the safety and efficacy of the combination of bone marrow mesenchymal stem cells (BMSCs) and low dose BMP-2 delivered by PEC for bone regeneration in a porcine model of anterior lumbar interbody spinal fusion (ALIF) application. Six Yorkshire pigs underwent a tri-segmental (L2/L3; L3/L4; L4/L5) ALIF in four groups, namely: (a) BMSCs + 25 μg BMP-2/PEC (n = 9), (b) 25 μg BMP-2/PEC (n = 3), (c) BMSCs (n = 3), and (d) 50 μg BMP-2/absorbable collagen sponge (n = 3). Fusion outcomes were evaluated by radiography, biomechanical testing, and histological analysis after 12 weeks. Mean radiographic scores at 12 weeks were 2.7, 2.0, 1.0, and 1.0 for Groups 1 to 4, respectively. μ-CT scanning, biomechanical evaluation, and histological analysis demonstrated solid fusion and successful bone regeneration in Group 1. In contrast, Group 2 showed inferior quality and slow rate of fusion, and Groups 3 and 4 failed to fuse any of the interbody spaces. There was no obvious evidence of seroma formation, implant rejection, or any other complications in all groups. The results suggest that the combination of BMSCs and low dose BMP-2/PEC could further lower down the effective dose of the BMP-2 and be used as a bone graft substitute in the large animal ALIF model.

Mechanical Properties of Human Concentrated Growth Factor (CGF) Membrane and the CGF Graft with Bone Morphogenetic Protein-2 (BMP-2) onto Periosteum of the Skull of Nude Mice

Concentrated growth factor (CGF) is 100% blood-derived, cross-linked fibrin glue with platelets and growth factors. Human CGF clot is transformed into membrane by a compression device, which has been widely used clinically. However, the mechanical properties of the CGF membranes have not been well characterized. The aims of this study were to measure the tensile strength of human CGF membrane and observe its behavior as a scaffold of BMP-2 in ectopic site over the skull. The tensile test of the full length was performed at the speed of 2mm/min. The CGF membrane (5 × 5 × 2 mm3) or the CGF/BMP-2 (1.0 μg) membrane was grafted onto the skull periosteum of nude mice (5-week-old, male), and harvested at 14 days after the graft. The appearance and size of the CGF membranes were almost same for 7 days by soaking at 4 °C in saline. The average values of the tensile strength at 0 day and 7 days were 0.24 MPa and 0.26 MPa, respectively. No significant differences of both the tensile strength and the elastic modulus were found among 0, 1, 3, and 7 days. Supra-periosteal bone induction was found at 14 days in the CGF/BMP-2, while the CGF alone did not induce bone. These results demonstrated that human CGF membrane could become a short-term, sticky fibrin scaffold for BMP-2, and might be preserved as auto-membranes for wound protection after the surgery.