LbL coated microcapsules for delivering lipid-based drugs

Autonomic self-regulating systems based on polyelectrolyte microcapsules and microgel particles

Biological systems possess unique non-equilibrium functions, maintaining tight manipulation of their surroundings through inter-communication of multiple components and self-regulatory capability organized over different length scales. However, most artificial materials are incapable of communicating and self-regulating behavior due to their limited number of component and direct responsive modes. Herein, a new integrated self-regulation system is developed utilizing stimuli-responsive polyelectrolyte capsules as building blocks. The combination of stimuli-responsive capsules and enzyme immobilized microgels is designed to mimic life systems and its programmable interactive communications and self-regulation behavior is demonstrated through communication-feedback mechanism. Polyelectrolyte capsules can sense changes of their surrounding, then start the internal communication by releasing energy-rich cargo mimicking the behavior of the cells. The microgel particles subsequently complete closed-loop communication through providing negative feedback on capsules by enzymatic reaction and actuating pH-regulation of the whole system. Different communication modes and pH-regulation behaviors could be achieved by adjusting spatial and kinetic conditions. Proposed intelligent system is highly customizable due to the wide selection of encapsulated cargos, stimuli-responsive blocks and reaction networks, and would have broad influences in areas ranging from medical implants that assist in stabilizing body functions to microreactor system that regulate catalytic reactions.

Spectro-kinetic investigations on the release mechanism of lysozyme from layer-by-layer reservoirs

The investigations of protein adsorption and release on interfaces aid in the elucidation of the protein-surface interaction mechanism, which has several applications in the biomedical area. The spectro-kinetic and morphological analysis of the release of lysozyme (Lyz) from chitosan/polystyrene sulphonate (CHI/PSS) multilayer immobilized at pHs 10.6, 8.8 and 5.0 shows that the extent of release strongly depends on the pH of Lyz loading and the ionic strength of the desorbing solution. When compared to pH 8.8, the release for pH 10.6 achieves equilibrium more rapidly. At loading pH 10.6, the release is surface-mediated, at pH 8.8, it is both surface- and bulk-mediated, while at pH 5.0 it is bulk mediated with minimal release. Lyz released for loading pH 10.6 retains its native secondary structure. Kinetic fitting suggests that high loading pH 8.8-10.6 and high release ionic strength (0.5-1.0 M NaCl) lead to burst release of Lyz from CHI/PSS multilayer. Surface morphology changes of multilayer interface upon Lyz loading and release are highlighted by SEM topography and AFM height distribution analysis. The present work indicates that CHI/PSS multilayer system can function as a reservoir for burst as well as controlled release of lysozyme by selecting the loading pH and ionic strength.

A closer physico-chemical look to the Layer-by-Layer electrostatic self-assembly of polyelectrolyte multilayers

The fabrication of polyelectrolyte multilayer films (PEMs) using the Layer-by-Layer (LbL) method is one of the most versatile approaches for manufacturing functional surfaces. This is the result of the possibility to control the assembly process of the LbL films almost at will, by changing the nature of the assembled materials (building blocks), the assembly conditions (pH, ionic strength, temperature, etc.) or even by changing some other operational parameters which may impact in the structure and physico-chemical properties of the obtained multi-layered films. Therefore, the understanding of the impact of the above mentioned parameters on the assembly process of LbL materials plays a critical role in the potential use of the LbL method for the fabrication of new functional materials with technological interest. This review tries to provide a broad physico-chemical perspective to the study of the fabrication process of PEMs by the LbL method, which allows one to take advantage of the many possibilities offered for this approach on the fabrication of new functional nanomaterials.

Thermoplasmonic-Triggered Release of Loads from DNA-Modified Hydrogel Microcapsules Functionalized with Au Nanoparticles or Au Nanorods

Microcapsules consisting of hydrogel shells cross-linked by glucosamine-boronate ester complexes and duplex nucleic acids, loaded with dyes or drugs and functionalized with Au nanoparticles (Au NPs) or Au nanorods (Au NRs), are developed. Irradiation of Au NPs or Au NRs results in the thermoplasmonic heating of the microcapsules, and the dissociation of the nucleic acid cross-linkers. The separation of duplex nucleic acid cross-linkers leads to low-stiffness hydrogel shells, allowing the release of loads. Switching off the light-induced plasmonic heating results in the regeneration of stiff hydrogel shells protecting the microcapsules, leading to the blockage of release processes. The thermoplasmonic release of tetramethylrhodamine-dextran, Texas Red-dextran, doxorubicin-dextran (DOX-D), or camptothecin-carboxymethylcellulose (CPT-CMC) from the microcapsules is introduced. By loading the microcapsules with two different drugs (DOX-D and CPT-CMC), the light-controlled dose release is demonstrated. Cellular experiments show efficient permeation of Au NPs/DOX-D or Au NRs/DOX-D microcapsules into MDA-MB-231 cancer cells and inefficient uptake by MCF-10A epithelial breast cells. Cytotoxicity experiments reveal selective thermoplasmon-induced cytotoxicity of the microcapsules toward MDA-MB-231 cancer cells as compared to MCF-10A cells. Also, selective cytotoxicity towards MDA-MB-231 cancer cells upon irradiation of the Au NPs- and Au NRs-functionalized microcapsules at λ = 532 or 910 nm is demonstrated.

Electrostatically gated nanofluidic membrane for ultra-low power controlled drug delivery

Patient-centered therapeutic management for chronic medical conditions is a desired but unmet need, largely attributable to the lack of adequate technologies for tailored drug administration. While triggered devices that control the delivery of therapeutics exist, they often rely on impractical continuous external activation. As such, next generation continuously tunable drug delivery systems independent of sustained external activation remain an elusive goal. Here we present the development and demonstration of a silicon carbide (SiC)-coated nanofluidic membrane that achieves reproducible and tunable control of drug release via electrostatic gating. By applying a low-intensity voltage to a buried electrode, we showed repeatable and reproducible in vitro release modulation of three model analytes. A small fluorophore (Alexa Fluor 647), a large polymer poly(sodium 4-styrenesulfonate) and a medically relevant agent (DNA), were selected as representatives of small molecule therapeutics, polymeric drug carriers, and biological therapeutics, respectively. Unlike other drug delivery systems, our technology performed consistently over numerous cycles of voltage modulation, for over 11 days. Importantly, low power consumption and minimal leakage currents were achieved during the study. Further, the SiC coating maintained integrity and chemical inertness, shielding the membrane from degradation under simulated physiological and accelerated conditions for over 4 months. Through leveraging the flexibility offered by electrostatic gating control, our technology provides a valuable strategy for tunable delivery, setting the foundation for the next generation of drug delivery systems.

Molecular Assemblies of Biomimetic Microcapsules

Layer-by-layer (LbL) assembly is a most commonly used method to prepare various microcapsules based on the electrostatic interactions, hydrogen bonding, covalent bonding, and so on. Among these interactions, Schiff base bond formed in covalent assembly not only has an advantage in stability, but also enables the assembled microcapsules with autofluorescence and pH sensitivity. In this Article, we will mainly describe the construction of biomimetic microcapsules through Schiff base mediated LbL assembly. The structures and properties of the assembled microcapsules are introduced and their applications as drug carriers are highlighted.

Microbubble Formulations: Synthesis, Stability, Modeling and Biomedical Applications

Microbubbles are increasingly being used in biomedical applications such as ultrasonic imaging and targeted drug delivery. Microbubbles typically range from 0.1 to 10 µm in size and consist of a protective shell made of lipids or proteins. The shell encapsulates a gaseous core containing gases such as oxygen, sulfur hexafluoride or perfluorocarbons. This review is a consolidated account of information available in the literature on research related to microbubbles. Efforts have been made to present an overview of microbubble synthesis techniques; microbubble stability; microbubbles as contrast agents in ultrasonic imaging and drug delivery vehicles; and side effects related to microbubble administration in humans. Developments related to the modeling of microbubble dissolution and stability are also discussed.

Characterization of Bovine Serum Albumin and (-)-Epigallocatechin Gallate/3,4- O-Dicaffeoylquinic Acid/Tannic Acid Layer by Layer Assembled Microcapsule for Protecting Immunoglobulin G in Stomach Digestion and Release in Small Intestinal Tract

The protein-polyphenol layer by layer (LbL) assembled polymer composite microcapsule is a considerable delivery system that can be used to improve the bioactive stability and effectiveness of natural compounds in various applications. In the present study, three kinds of polyphenols were loaded in the sequence of (-)-epigallocatechin gallate (EGCG), 3,4- O-dicaffeoylquinic acid (3,4-diCQA), and tannin acid (TA) to prepare a BSA-polyphenol LbL membrane. The composition of IgG-(BSA-EGCG/3,4-diCQA/TA) _n microcapsules and their stability and releasing ability in the gastrointestinal tract were evaluated. In addition, by binding of these three kinds of polyphenols to BSA, the thermal denaturation temperature and ordered secondary structure of the BSA-polyphenol microcapsules were increased, and the time of scavenging activity on 2,2'-azinobis(3-ethylbenzothiazolin-6-sulfonic acid) free radicals was significantly prolonged. These findings suggest that (BSA-EGCG/3,4-diCQA/TA) _n microcapsules can not only protect IgG in food processing and stomach digestion but also release it in the small intestinal tract for bioactive delivery.

Tunable Interfacial Properties in Silk Ionomer Microcapsules with Tailored Multilayer Interactions

Microencapsulation techniques represent a critical step in realizing highly controlled transport of functional materials in multiphase systems. The first demonstration of microcapsules prepared from minimally grafted silk ionomers (silk fibroin modified with cationic/anionic charge groups) are presented here. These tailored biomacromolecules have shown significantly increased biocompatibility over traditional polyelectrolytes and heavily grafted silk ionomers, but the low grafting density had previously limited attempts to fabricate stable microcapsules. In addition, the first microcapsules from polyethylene-glycol-grafted silk ionomers are fabricated and the corresponding impact on microcapsule behavior is demonstrated. The materials are shown to exhibit pH-responsive properties, with the microcapsules demonstrating an approx. tenfold decrease in stiffness and an approx. threefold change in diffusion coefficient when moving from acidic to basic buffer. Finally, the effect of assembly conditions of the microcapsules are shown to play a large role in determining final properties, with microcapsules prepared in acidic buffers showing lower roughness, stiffness, and an inversion in transport behavior (i.e., permeability decreases at higher pH).

Nanoencapsulation of phase change materials for advanced thermal energy storage systems

Phase change materials (PCMs) allow the storage of large amounts of latent heat during phase transition. They have the potential to both increase the efficiency of renewable energies such as solar power through storage of excess energy, which can be used at times of peak demand; and to reduce overall energy demand through passive thermal regulation. 198.3 million tons of oil equivalent were used in the EU in 2013 for heating. However, bulk PCMs are not suitable for use without prior encapsulation. Encapsulation in a shell material provides benefits such as protection of the PCM from the external environment and increased specific surface area to improve heat transfer. This review highlights techniques for the encapsulation of both organic and inorganic PCMs, paying particular attention to nanoencapsulation (capsules with sizes <1 μm). We also provide insight on future research, which should focus on (i) the development of multifunctional shell materials to improve lifespan and thermal properties and (ii) advanced mass manufacturing techniques for the economically viable production of PCM capsules, making it possible to utilize waste heat in intelligent passive thermal regulation systems, employing controlled, "on demand" energy release/uptake.

Synergy of Catechol-Functionalized Zinc Oxide Nanorods and Porphyrins in Layer-by-Layer Assemblies

Catechol-functionalized, positively charged ZnO nanorods (NRs) and anionic porphyrins were integrated into layer-by-layer (LbL) assemblies. In general, this study focuses on the impact that different porphyrins, varying in size and number of negative charges, exert on the LbL architecture in terms of morphology and spectroscopy. In particular, through a combination of analytical methods, including UV/Vis spectroscopy, SEM, and profilometry, valuable insights into LbL assembly formation were gathered. A key feature was the surface coverage in the resulting films. Denser films and surface coverages were realized when highly negatively charged and sterically demanding porphyrins were employed. As a complement to basic characterization, the LbL assembled films were used to fabricate proof-of-concept solar cells.

Modified Mesoporous Silica Nanoparticles with a Dual Synergetic Antibacterial Effect

Application of mesoporous silica nanoparticles (MSNs) as antifouling/antibacterial carriers is limited and specifically with a dual synergetic effect. In the present work, MSNs modified with quaternary ammonium salts (QASs) and loaded with the biocide Parmetol S15 were synthesized as functional fillers for antifouling/antibacterial coatings. From the family of the MSNs, MCM-48 was selected as a carrier because of its cubic pore structure, high surface area, and high specific pore volume. The QASs used for the surface modification of MCM-48 were dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride and dimethyltetradecyl[3-(triethoxysilyl)propyl]ammonium chloride. The QAS-modified MCM-48 reveals strong covalent bonds between the QAS and the surface of the nanoparticles. The surface functionalization was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and ζ-potential measurements. Additional loading of the QAS-modified MCM-48 with a commercially available biocide (Parmetol S15) resulted in a synergetic dual antibacterial/antifouling effect. Either loaded or unloaded QAS-modified MSNs exhibited high antibacterial performance confirming their dual activity. The QAS-modified MCM-48 loaded with the biocide Parmetol S15 killed all exposed bacteria after 3 h of incubation and presented 100% reduction at the antibacterial tests against Gram-negative and Gram-positive bacteria. Furthermore, the QAS-modified MCM-48 without Parmetol S15 presented 77-89% reduction against the exposed Gram-negative bacteria and 78-94% reduction against the exposed Gram-positive bacteria. In addition, the modified MCM-48 was mixed with coating formulations, and its antifouling performance was assessed in a field test trial in northern Red Sea. All synthesized paints presented significant antifouling properties after 5 months of exposure in real seawater conditions, and the dual antifouling effect of the nanoparticles was confirmed.

Triplex DNA Nanostructures: From Basic Properties to Applications

Triplex nucleic acids have recently attracted interest as part of the rich "toolbox" of structures used to develop DNA-based nanostructures and materials. This Review addresses the use of DNA triplexes to assemble sensing platforms and molecular switches. Furthermore, the pH-induced, switchable assembly and dissociation of triplex-DNA-bridged nanostructures are presented. Specifically, the aggregation/deaggregation of nanoparticles, the reversible oligomerization of origami tiles and DNA circles, and the use of triplex DNA structures as functional units for the assembly of pH-responsive systems and materials are described. Examples include semiconductor-loaded DNA-stabilized microcapsules, DNA-functionalized dye-loaded metal-organic frameworks (MOFs), and the pH-induced release of the loads. Furthermore, the design of stimuli-responsive DNA-based hydrogels undergoing reversible pH-induced hydrogel-to-solution transitions using triplex nucleic acids is introduced, and the use of triplex DNA to assemble shape-memory hydrogels is discussed. An outlook for possible future applications of triplex nucleic acids is also provided.

pH- and ligand-induced release of loads from DNA-acrylamide hydrogel microcapsules

Herein, a method to construct stimuli-responsive DNA-acrylamide-based hydrogel microcapsules has been presented. This method involves the use of polyacrylamide chains modified with predesigned nucleic acid hairpin units and optionally single-strand tethers that provide the required hybridization and recognition functions to yield substrate-loaded stimuli-responsive hydrogel-based microcapsules. The synthesis of the microcapsules involves the loading of CaCO3 microparticles with the respective load substrates and the functionalization of the CaCO3 template particles with nucleic acid promoter units. In the presence of the hairpin-modified acrylamide chains, the promoter units induce the hybridization chain reaction (HCR), which leads to the formation of a hydrogel coating, which, after the dissociation of the CaCO3 cores, yields substrate-loaded stimuli-responsive hydrogel microcapsules. One of the microcapsule systems includes, in the hairpin-modified acrylamide constructs, and in the subsequent HCR-generated hydrogel shells, the caged sequences of anti-ATP or anti-cocaine aptamers. In the presence of ATP or cocaine, the duplex-caged aptamer sequences are separated via the formation of ATP- or cocaine-aptamer complexes, which results in the partial separation of the microcapsules and the release of the loads. The second type of microcapsule is cooperatively stabilized by bridges generated by HCR and pH-sensitive duplex units. Under acidic conditions, the pH-sensitive bridges dissociate via the formation of i-motif structures, which results in an increase in the fluidity of the microcapsule shells and the release of the loads. Preliminary studies indicate that ATP- or pH-responsive microcapsules loaded with the anticancer drug, doxorubicin, have a selective cytotoxic effect on MDA-MB-231 cancer cells.

Preparation of poly(N-isopropylacrylamide)-block-(acrylic acid)-encapsulated proteinaceous microbubbles for delivery of doxorubicin

Inspired by theranostic technologies, we electrostatically loaded proteinaceous microbubbles (MBs) with a model drug, doxorubicin (Dox) to couple their utilizations in diagnostic imaging with drug loading. A temperature-sensitive polymer, poly(N-isopropylacrylamide-block-acrylic acid) (poly(NIPAM-b-AAc)) was used to encapsulate the Dox-loaded MBs to prevent premature release and to control the Dox release thermally. An LCST of 39°C, slightly higher than normal body temperatures, enables the release of Dox through a conformational change of the polymer shell upon moderate heating. The successive loadings of Dox and poly(NIPAM-b-AAc) were confirmed by fluorescent confocal laser scanning microscope (CLSM) imaging, zeta potential measurement, Fourier transform infrared spectroscopy (FTIR), and quartz crystal microbalance with dissipation (QCM-D). Without a polymer shell, Dox-loaded MBs showed a poor in vitro retention of Dox at room temperature, releasing ∼75% within 8h, whereas the polymer-shelled, Dox-loaded MBs did not show any premature release of Dox. From 37°C to 39°C, the cumulative release of Dox from the polymer-encapsulated MBs was increased from ∼20 to ∼90% over a period of 18h based on in vitro release testing (IVRT). However, the release profiles of Dox from the shell-free, Dox-loaded MBs did not exhibit any similar temperature-controlled behavior, releasing ∼90% of Dox within 5h at both 37°C and 39°C.

Preparation of graphene oxide–chitosan nanocapsules and their applications as carriers for drug delivery

The stable graphene oxide–chitosan nanocapsules as carriers for drug delivery were prepared via layer-by-layer self-assembly method.

Preparation of IL-loaded microreactors based on polyelectrolyte microcapsules

Encapsulation of ionic liquids (ILs) in crosslinked polyelectrolyte microcapsules, made via layer-by-layer assembly (LbL) was successfully conducted. Two different ILs were studied: 1-butyl-3-methylimidazolium tetrafluoroborate [Bmim]BF4 and 1-butyl-3-methylimidazolium hexafluorophosphate [Bmim]PF6. The polyelectrolyte microcapsules were successfully used as microcages for the synthesis of poly(methylmethacrylate) (PMMA), a non water-soluble polymer, in IL medium. Finally, the behaviour of the IL-loaded microreactors in polar and apolar solvents was evaluated. The strategies described in this study offer new routes for the preparation of microreactors incorporating IL which are of interest for many applications in the field of organic synthesis, catalysis and adsorption of active substances.

Adenosine Triphosphate-Triggered Release of Macromolecular and Nanoparticle Loads from Aptamer/DNA-Cross-Linked Microcapsules

The synthesis of stimuli-responsive DNA microcapsules acting as carriers for different payloads, and being dissociated through the formation of aptamer-ligand complexes is described. Specifically, stimuli-responsive anti-adenosine triphosphate (ATP) aptamer-cross-linked DNA-stabilized microcapsules loaded with tetramethylrhodamine-modified dextran (TMR-D), CdSe/ZnS quantum dots (QDs), or microperoxidase-11 (MP-11) are presented. In the presence of ATP as trigger, the microcapsules are dissociated through the formation of aptamer-ATP complexes, resulting in the release of the respective loads. Selective unlocking of the capsules is demonstrated, and CTP, GTP, or TTP do not unlock the pores. The ATP-triggered release of MP-11 from the microcapsules enables the MP-11-catalyzed oxidation of Amplex UltraRed by H2O2 to the fluorescent product resorufin.

Self-Assembly Technique for Biomedical Applications

Layer-by-layer (LbL) self-assembly has attracted extensive attention for its simplicity and versatility. Self-assembly has many potential applications, among which biomedical applications is especially important because it can be used as a means of generating drug delivery and biomedical materials. Based on this, most recent progress in the field of self-assembly technique for drug delivery and biomedical material applications are summarized in this mini review. The remaining challenges are also mentioned.

A perspective overview on lipospheres as lipid carrier systems

Both hydrophilic and lipophilic therapeutics can be delivered successfully into deep and peripheral tissues such as cerebrospinal fluid and central nervous system by encapsulating them with crystalline lipids as lipospheres. The advent of lipospheres was meant to deliver both therapeutic moieties with enhanced efficacy and added stability to reach out intended tissue areas. Although extensive information is available on physicochemical, analytical and biopharmaceutical aspects of lipospheres, there was no specific order pertaining to critical composition and rationale of component selection available for academic and pilot scale processing of lipospheres. With the interest of compiling key points in a typical formulation of lipid lipospheres, this article was intrigued to discuss melt method, co-solvent, microemulsion, super critical fluid, spray drying and spray congealing techniques that were employed to scale up lipospheres. The selection criteria for both the drugs and lipids in liposphere formulations were demonstrated here. The quality assessment with variables like loading capacity and entrapment efficiency was explained. A note on preliminary screening factors to determine the liposphere formation such as liposphere dimensions with morphological scenario was detailed in this article. This article also includes the stability and storage issues with reference to photolysis. The marked differential in enhancing solubility and permeability characteristics of Class II and IV drug candidates by liposphere delivery systems with an evident of in vivo outcomes were emphasized.

Layer-by-layer assembled thin films and microcapsules of nanocrystalline cellulose for hydrophobic drug delivery

A layer-by-layer (LbL) approach has been employed for the fabrication of multilayer thin films and microcapsules having nanofibrous morphology using nanocrystalline cellulose (NCC) as one of the components of the assembly. The applicability of these nanoassemblies as drug delivery carriers has been explored by the loading of an anticancer drug, doxorubicin hydrochloride, and a water-insoluble drug, curcumin. Doxorubicin hydrochloride, having a good water solubility, is postloaded in the assembly. In the case of curcumin, which is very hydrophobic and has limited solubility in water, a stable dispersion is prepared via noncovalent interaction with NCC prior to incorporation in the LbL assembly. The interaction of various other lipophilic drugs with NCC was analyzed theoretically by molecular docking in consideration of NCC as a general carrier for hydrophobic drugs.

Preparation of multifunctional polysaccharide microcontainers for lipophilic bioactive agents

Chitosan/xanthan gum microcontainers with a core-shell structure formed due to chemical interactions between polysaccharide chains induced by ultrasonication are presented. Containers were prepared by sonication of water-immiscible (oil-like) liquids in the solution of polysaccharides. One-step fabrication of the container permanent shell is possible, because of the contribution of ultrasonically caused formation of hydrogen bonds and amide linkages. We synthesized containers in a wide size range from 350 nm to 7500 nm, varying in oil/water ratio. The microcontainers were modified with oppositely charged polyelectrolytes and microparticles, which could be used to impart the specified properties to the system. The biocide 4,5-dichloro-2-n-octyl-4-isothiazoline-3-one (DCOIT) was loaded into the proposed containers by utilizing its solution as an oil phase. The following incorporation of the DCOIT containers into the polymer coating demonstrated more sustained antimicrobial activity (∼30%) of the biocide in the encapsulated state, compared to its non-encapsulated form.

Emerging methods for the fabrication of polymer capsules

Hollow polymer capsules are attracting increasing research interest due to their potential application as drug delivery vectors, sensors, biomimetic nano- or multi-compartment reactors and catalysts. Thus, significant effort has been directed toward tuning their size, composition, morphology, and functionality to further their application. In this review, we provide an overview of emerging techniques for the fabrication of polymer capsules, encompassing: self-assembly, layer-by-layer assembly, single-step polymer adsorption, bio-inspired assembly, surface polymerization, and ultrasound assembly. These techniques can be applied to prepare polymer capsules with diverse functionality and physicochemical properties, which may fulfill specific requirements in various areas. In addition, we critically evaluate the challenges associated with the application of polymer capsules in drug delivery systems.

Advances in cellular and tissue engineering using layer-by-layer assembly

Layer-by-layer (LbL) assembly is a self-assembly technique used to develop multilayer films based on complementary interactions between film components. These multilayer films have had a significant impact on the fields of cellular and tissue engineering. The aim of cellular engineering is to understand and control cell behavior, which not only impacts applications in regenerative medicine but also other biomedical therapies that rely on cell interactions with biomaterials, including treatments for autoimmune disorders and cancer. Tissue engineering approaches to tissue repair and regeneration utilize three-dimensional biomaterial scaffolds that interact favorably with cells. Cellular engineering studies can better inform the design of these scaffolds. The ease of tuning the chemical and mechanical properties of LbL films, the ability to coat a variety of medically relevant substrates (including cell culture surfaces and scaffolds), and the wide range of species that can be incorporated into these films (ranging from proteins to small molecules) have led to the successful use of LbL assembly for a variety of cellular and tissue engineering applications. The films used in these biomedical applications can be divided into those that release therapeutics, often with controlled stimuli-responsive release behavior, and those that act without releasing these agents.

Growth factor release from polyelectrolyte-coated titanium for implant applications

Polyelectrolyte multilayer coatings based on poly(methacrylic acid) and poly-l-histidine were formed on anodized titanium surfaces with adsorbed bone morphogenetic protein 2 (BMP-2) or basic fibroblast growth factor (FGFb). These coatings are proposed for use on titanium implanted devices. Coatings were capable of sustained release of growth factor over 25 days, with BMP-2 and FGFb exhibiting approximately identical release profiles. Cell culture on growth factor-eluting surfaces was more effective for preosteoblasts on BMP-2-eluting surfaces than for fibroblasts on FGFb-eluting surfaces. Cell counts at all time points on BMP-2-eluting surfaces were significantly higher than for those on anodized titanium or polyelectrolyte surfaces that did not contain BMP-2. Alkaline phosphatase levels were significantly higher after 21 days on BMP-2-eluting surfaces, indicating increased bone growth.

In vitro interaction of polyelectrolyte nanocapsules with model cells

The nanocapsules based on a liquid core with polyelectrolyte shells prepared by the technique of sequential adsorption of polyelectrolytes (LbL) were investigated to verify capsules bioacceptance. Using AOT (docusate sodium salt) as emulsifier, we obtained liquid cores, stabilized by the interfacial complex AOT/PLL (poly-l-lysine hydrobromide). These liquid cores were encapsulated by sequential adsorption of polyelectrolytes using biocompatible polyanion PGA (poly-l-glutamic acid sodium salt) and biocompatible polycation PLL. The average size of the formed capsules was 60-80 nm. The influence of a number of polyelectrolytes layer in the shell (thickness of polyelectrolytes shell), surface charge, and capsule doses on cell viability was studied in a cellular coculture assay. In order to improve nanocapsules biocompatibility, the PEG-ylated external layers were prepared using PGA-g-PEG (PGA grafted by PEG poly(ethylene glycol)). For the most toxic nanocapsules (with only one polycation layer) about 90% of cells could survive when the concentration of nanocapsules was below 0.2 × 10(6) per one cell. That suggests that they use as a delivery vehicles is quite safe for living cells. Analysis of internalization of AOT(PLL/PGA)4-g-PEG in HEK 293 cells indicates that tested nanocapsules can easily penetrate cells membrane.