Polysaccharide-based nucleic acid nanoformulations

Chitosan and hyaluronic acid based injectable dual network hydrogels - Mediating antimicrobial and inflammatory modulation to promote healing of infected bone defects

In bone defects, infections lead to excessive inflammation, increased bacterial, and bone lysis, resulting in irregular wounds that hinder new bone regeneration. Injectable bioactive materials with adequate antimicrobial activity and strong osteogenic potential are urgently required to remedy irregular defects, eradicate bacteria, and facilitate the generation of new bone tissue. In this research, injectable dual-network composite hydrogels consisting of sulfated chitosan, oxidized hyaluronic acid, β-sodium glycerophosphate, and CuSr doped mesoporous bioactive glass loaded with bone morphogenetic protein (CuSrMBGBMP-2) were utilized for the first time to treat infectious bone defects. Initially, the hydrogel was injected into the wound at 37 °C with minimal invasion to establish a stable state and prevent hydrogel loss. Subsequently, sulfated chitosan eliminated bacteria at the wound site and facilitated cell proliferation with oxidized hyaluronic acid. Additionally, CuSrMBGBMP-2 strengthened antibacterial properties, regulated inflammatory reactions, promoted angiogenesis and osteogenic differentiation, addressing the deficiency in late-stage osteogenesis. Specifically, the injectable dual-network hydrogel based on chitosan and hyaluronic acid is minimally invasive, offering antibacterial, anti-inflammatory, pro-angiogenic, and bone regeneration properties. Therefore, this hydrogel with injectable dual network properties holds great promise for the treatment of bone infections in the future.

Characterization, stability, and curcumin bioaccessibility of buckwheat flower polysaccharide conjugate emulsion

In this study, buckwheat flower polysaccharide conjugates (BFPCs) were synthesized and evaluated for their emulsification properties. The stability of BFPC-stabilized emulsions was assessed through particle size analysis, zeta potential measurements, microscopic observations, and rheological tests. Gum Arabic served as a control to compare BFPC's emulsifying efficacy across varying storage conditions, including exposure to metal ions, pH variations, and different heat treatment temperatures. Results showed that BFPC significantly lowered interfacial tension (16.2 mN/m) and effectively stabilized emulsions containing 60 wt% medium-chain triglycerides at a concentration of 1.0 wt%. Over a 20-day storage period, BFPC emulsions demonstrated robust resistance to heat (60-90°C), acidic conditions (pH 2.0-9.0), and ion concentrations (Na+, Ca2+). Moreover, in a high oil phase emulsion, BFPC enhanced the bioavailability of curcumin to 27.05%, markedly higher than the 7.10% observed without emulsification, underscoring its potential in nutrient delivery applications. PRACTICAL APPLICATION: Due to its excellent resistance, long-time emulsifying stability under different conditions, and its good effect in curcumin embedding, BFPC has a broad prospect and can be widely used under various conditions in food industry.

Drug Efficacy Comparison of pH-Sensitive and Non-pH-Sensitive Taxol Delivery Nanoparticles in Cancer Therapy

Taxol is one of the most widely used chemotherapeutic agents but is restricted by its poor solubility and severe side effects in clinical practice. To overcome these limitations, pH-sensitive nanoparticles, Acetalated Dextran6k-PEG5k-PLA2k-Taxol (ADPP-PTX), non-pH-sensitive nanoparticles, and Propionic Anhydride modified Dextran6k-PEG5k-PLA2k-Taxol (PDPP-PTX) are developed for the delivery of Taxol. Compared with PDPP-PTX, ADPP-PTX shows higher sensitivity to acid response and greater anti-proliferative effect on cancer cells. In the in vivo study, ADPP-PTX treatment effectively suppresses the growth of tumors, while only half the dose of Taxol is used, which significantly reduces systemic toxicity compared with Taxol and PDPP-PTX.

Next Generation Mucosal Vaccine Strategy for Respiratory Pathogens

Inducing humoral and cytotoxic mucosal immunity at the sites of pathogen entry has the potential to prevent the infection from getting established. This is different from systemic vaccination, which protects against the development of systemic symptoms. The field of mucosal vaccination has seen fewer technological advances compared to nucleic acid and subunit vaccine advances for injectable vaccine platforms. The advent of the next-generation adenoviral vectors has given a boost to mucosal vaccine research. Basic research into the mechanisms regulating innate and adaptive mucosal immunity and the discovery of effective and safe mucosal vaccine adjuvants will continue to improve mucosal vaccine design. The results from clinical trials of inhaled COVID-19 vaccines demonstrate their ability to induce the proliferation of cytotoxic T cells and the production of secreted IgA and IgG antibodies locally, unlike intramuscular vaccinations. However, these mucosal vaccines induce systemic immune responses at par with systemic vaccinations. This review summarizes the function of the respiratory mucosa-associated lymphoid tissue and the advantages that the adenoviral vectors provide as inhaled vaccine platforms.

Research Progress of a Pesticide Polymer-Controlled Release System Based on Polysaccharides

In recent years, with the development of the nanomaterials discipline, many new pesticide drug-carrying systems-such as pesticide nano-metal particles, nano-metal oxides, and other drug-carrying materials-had been developed and applied to pesticide formulations. Although these new drug-loading systems are relatively friendly to the environment, the direct exposure of many metal nanoparticles to the environment will inevitably lead to potential effects. In response to these problems, organic nanomaterials have been rapidly developed due to their high-quality biodegradation and biocompatibility. Most of these organic nanomaterials were mainly polysaccharide materials, such as chitosan, carboxymethyl chitosan, sodium alginate, β-cyclodextrin, cellulose, starch, guar gum, etc. Some of these materials could be used to carry inorganic materials to develop a temperature- or pH-sensitive pesticide drug delivery system. Herein, the pesticide drug-carrying system developed based on polysaccharide materials, such as chitosan, was referred to as the pesticide polymer drug-carrying system based on polysaccharide materials. This kind of drug-loading system could be used to protect the pesticide molecules from harsh environments, such as pH, light, temperature, etc., and was used to develop the function of a sustained release, targeted release of pesticides in the intestine of insects, and achieve the goal of precise application, reduction, and efficiency of pesticides. In this review, the recent progress in the field of polysaccharide-based polymer drug delivery systems for pesticides has been discussed, and suggestions for future development were proposed based on the current situation.

Multifunctional Oxidized Dextran as a Matrix for Stabilization of Octahedral Molybdenum and Tungsten Iodide Clusters in Aqueous Media

Due to their high abundance, polymeric character, and chemical tunability, polysaccharides are perfect candidates for the stabilization of photoactive nanoscale objects, which are of great interest in modern science but can be unstable in aqueous media. In this work, we have demonstrated the relevance of oxidized dextran polysaccharide, obtained via a simple reaction with H₂O₂, towards the stabilization of photoactive octahedral molybdenum and tungsten iodide cluster complexes [M₆I₈}(DMSO)₆](NO₃)₄ in aqueous and culture media. The cluster-containing materials were obtained by co-precipitation of the starting reagents in DMSO solution. According to the data obtained, the amount and ratio of functional carbonyl and carboxylic groups as well as the molecular weight of oxidized dextran strongly affect the extent of stabilization, i.e., high loading of aldehyde groups and high molecular weight increase the stability, while acidic groups have some negative impact on the stability. The most stable material based on the tungsten cluster complex exhibited low dark and moderate photoinduced cytotoxicity, which together with high cellular uptake makes these polymers promising for the fields of bioimaging and PDT.

Enhancing the antitumor immunosurveillance of PD-L1-targeted gene therapy for metastatic melanoma using cationized Panax Notoginseng polysaccharide

Improved curative effects with reduced toxicity has always been the ultimate goal of gene delivery vectors for tumor immunotherapy. Panax notoginseng polysaccharide (PNP), a natural plant-derived macromolecule, not only has antitumor immune activity but also has the typical structural characteristics useful for gene delivery. In this work, positively charged polyethyleneimine (PEI) was directly grafted to the backbone of PNP to induced its charge reversal and generate a functional gene vector (PNP-PEI). Moreover, a short hairpin RNA targeting the programmed death-ligand 1 (PD-L1) was loaded into PNP-PEI to generate a potentially therapeutic nanoparticle (PNP-PEI/shPD-L1). In vitro and in vivo experiments demonstrated that PNP-PEI could efficiently carry the therapeutic shPD-L1 into tumor cells and that PNP-PEI/shPD-L1 could significantly inhibit the expression of PD-L1 and growth of B16-F10 cells. Noteworthily, treatment with PNP-PEI reversed the phenotype of macrophages from M2 to M1 subtype and promoted dendritic cell maturation, which encouraged the host immunity and enhanced the therapeutic antitumor effects. In summary, this study describes a PNP-based gene delivery vector and highlights the beneficial immunopotentiating therapeutic outcomes of PNP-PEI for tumor immunotherapy.

Polymeric Nanogel for Oral Delivery of the Chemotherapeutic Agent: Fabrication and Evaluation Alongside Toxicological Studies and Histopathological Examination

Nanogel has attracted considerable attention as one of the most versatile drug delivery systems, especially for site-specific and/or time-controlled delivery of the chemotherapeutic agent. The main objective of this study was to prepare the polymeric nanogel characterized by Fourier transform infrared spectroscopy, x-ray diffraction, thermogravimetric analysis, differential scanning, and oral acute toxicity. Free radical polymerization was done for the fabrication of polymeric nanogel. Fourier transform infrared spectroscopy was used to confirm the successful free radical polymerization. Various techniques such as x-ray diffraction, differential scanning calorimetric, and thermogravimetric analysis measurement were used to investigate the thermal behavior and crystallinity of developed nanogel. Parameters such as swelling, drug loading, and in vitro drug release is enhanced as polymers and monomers concentrations increase while these parameters decrease in case of increasing crosslinker concentration. The oral biocompatibility results of developed nanogel exhibited no toxicity in rabbits. Histopathological changes were observed between empty and loaded group. The nanosized gel offers a specific surface area which increases the stability of loaded drug (oxaliplatin) and bioavailability of the drug (oxaliplatin) as compared to the conventional drug delivery systems.

Efficiency and Safety of Dextran-PAMAM/siMMP-9 Complexes for Decreasing Matrix Metalloproteinase-9 Expression and Promoting Wound Healing in Diabetic Rats

Difficult healing of diabetic foot ulcers is associated with overexpression of matrix metalloproteinase 9 (MMP-9) in the local wound. Therefore, strategies aimed at downregulation of MMP-9 levels in ulcer sites may promote tissue regeneration and accelerate healing of diabetic foot ulcers (DFU). To fulfill this aim, we exploited dextran conjugated with poly(amidoamine) (Dextran-PAMAM) as a gene carrier to deliver MMP-9 targeted siRNA (siMMP-9). The prepared complexes could be efficiently endocytosed with low cytotoxicity to HaCat cells. Dextran-PAMAM could efficiently deliver siMMP-9 and significantly inhibit MMP-9 expression in vitro. Diabetic rats wound models showed that topical application of the Dextran-PAMAM/siMMP-9 complex effectively knocked down MMP-9 expression in skin wound tissue, thus accelerating wound healing. Taken together, this study demonstrates that the Dextran-PAMAM/siMMP-9 complex possesses high potential for wound healing and could serve as a promising regenerative platform for improving DFU healing.

Sodium Alginate-Doping Cationic Nanoparticle As Dual Gene Delivery System for Genetically Bimodal Therapy

Photodynamic therapy occupies an important position in cancer therapy because of its minimal invasiveness and high spatiotemporal precision, and photodynamic/gene combined therapy is a promising strategy for additive therapeutic effects. However, the asynchronism and heterogeneity between traditional chemical photosensitizers and nucleic acid would restrict the feasibility of this strategy. KillerRed protein, as an endogenous photosensitizer, could be directly expressed and take effect in situ by transfecting KillerRed reporter genes into cells. Herein, a simple and easily prepared sodium alginate (SA)-doping cationic nanoparticle SA@GP/DNA was developed for dual gene delivery. The nanoparticles could be formed through electrostatic interaction among sodium alginate, polycation, and plasmid DNA. The title complex SA@GP/DNA showed good biocompatibility and gene transfection efficiency. Mechanism studies revealed that SA doping could facilitate the cellular uptake and DNA release. Furthermore, SA@GP/DNA was applied to the codelivery of p53 and KillerRed reporter genes for the synergistic effect combining p53-mediated apoptosis therapy and KillerRed-mediated photodynamic therapy. The ROS generation, tumor cell growth inhibition, and apoptosis assays proved that the dual-gene transfection could mediate the better effect compared with single therapy. This rationally designed dual gene codelivery nanoparticle provides an effective and promising platform for genetically bimodal therapy.

Current Advancements in Self-assembling Nanocarriers-Based siRNA Delivery for Cancer Therapy

Different therapeutic practices for treating cancers have significantly evolved to compensate and/or overcome the failures in conventional methodologies. The demonstrated potentiality in completely inhibiting the tumors and in preventing cancer relapse has made nucleic acids therapy (NAT)/gene therapy as an attractive practice. This has been made possible because NAT-based cancer treatments are highly focused on the fundamental mechanisms - i.e., silencing the expression of oncogenic genes responsible for producing abnormal proteins (via messenger RNAs (mRNAs)). However, the future clinical translation of NAT is majorly dependent upon the effective delivery of the exogenous nucleic acids (especially RNAs - e.g., short interfering RNAs (siRNAs) - herein called biological drugs). Moreover, nano-based vehicles (i.e., nanocarriers) are involved in delivering them to prevent degradation and undesired bioaccumulation while enhancing the stability of siRNAs. Herein, we have initially discussed about three major types of self-assembling nanocarriers (liposomes, polymeric nanoparticles and exosomes). Later, we have majorly reviewed recent developments in non-targeted/targeted nanocarriers for delivery of biological drugs (individual/dual) to silence the most important genes/mRNAs accountable for inducing protein abnormality. These proteins include polo-like kinase 1 (PLK1), survivin, vascular endothelial growth factor (VEGF), B-cell lymphoma/leukaemia-2 (Bcl-2) and multi-drug resistance (MDR). Besides, the consequent therapeutic effects on cancer growth, invasion and/or metastasis have also been discussed. Finally, we have comprehensively reviewed the improvements achieved in the cutting-edge cancer therapeutics while delivering siRNAs in combination with clinically approved chemotherapeutic drugs.

The maternal-fetal transfer of passive immunity as a mechanism of transplacental nanoparticle drug delivery for prenatal therapies

Nanoparticles administered into the maternal circulation and across the placenta are a potential clinical therapy to treat congenital diseases. The mechanism by which nanoparticles can safely cross the placenta for targeted drug delivery to the fetus remains poorly understood. We demonstrate that the maternal-fetal transfer of passive immunity through the neonatal Fc Receptor (FcRn) can induce the transplacental transfer of chitosan nanoparticles modifed with IgG antibodies (414 ± 27 nm). The transfer of FITC-tagged IgG-modified chitosan nanoparticles was 2.8 times higher (p = 0.0264) compared to similarly-sized unmodified chitosan nanoparticles (375 ± 17 nm). Co-administration of free IgG competitively diminished the transplacental transfer of IgG-modified nanoparticles, yet unmodified nanoparticles remained unaffected. Colocalization of the FcRn and the IgG-modified chitosan nanoparticles were observed with confocal microscopy. Barrier function before and after nanoparticle administration remained intact as determined by TEER (75-79 Ω cm²) and immmunofluorescence of ZO-1 tight junction proteins. The results provide insight into the clinical applications of nanoparticles for prenatal therapies using the mechanism of the maternal-fetal transfer of passive immunity.

Exploring chitosan-shelled nanobubbles to improve HER2 + immunotherapy via dendritic cell targeting

Immunotherapy is a valuable approach to cancer treatment as it is able to activate the immune system. However, the curative methods currently in clinical practice, including immune checkpoint inhibitors, present some limitations. Dendritic cell vaccination has been investigated as an immunotherapeutic strategy, and nanotechnology-based delivery systems have emerged as powerful tools for improving immunotherapy and vaccine development. A number of nanodelivery systems have therefore been proposed to promote cancer immunotherapy. This work aims to design a novel immunotherapy nanoplatform for the treatment of HER2 + breast cancer, and specially tailored chitosan-shelled nanobubbles (NBs) have been developed for the delivery of a DNA vaccine. The NBs have been functionalized with anti-CD1a antibodies to target dendritic cells (DCs). The NB formulations possess dimensions of approximately 300 nm and positive surface charge, and also show good physical stability up to 6 months under storage at 4 °C. In vitro characterization has confirmed that these NBs are capable of loading DNA with good encapsulation efficiency (82%). The antiCD1a-functionalized NBs are designed to target DCs, and demonstrated the ability to induce DC activation in both human and mouse cell models, and also elicited a specific immune response that was capable of slowing tumor growth in mice in vivo. These findings are the proof of concept that loading a tumor vaccine into DC-targeted chitosan nanobubbles may become an attractive nanotechnology approach for the future immunotherapeutic treatment of cancer.

miRNA Delivery by Nanosystems: State of the Art and Perspectives

MicroRNAs (miRNAs) are short (~21-23 nucleotides), non-coding endogenous RNA molecules that modulate gene expression at the post-transcriptional level via the endogenous RNA interference machinery of the cell. They have emerged as potential biopharmaceuticals candidates for the treatment of various diseases, including cancer, cardiovascular and metabolic diseases. However, in order to advance miRNAs therapeutics into clinical settings, their delivery remains a major challenge. Different types of vectors have been investigated to allow the delivery of miRNA in the diseased tissue. In particular, non-viral delivery systems have shown important advantages such as versatility, low cost, easy fabrication and low immunogenicity. Here, we present a general overview of the main types of non-viral vectors developed for miRNA delivery, with their advantages, limitations and future perspectives.

3D Printing of Collagen/Oligomeric Proanthocyanidin/Oxidized Hyaluronic Acid Composite Scaffolds for Articular Cartilage Repair

Articular cartilage defects affect millions of people worldwide, including children, adolescents, and adults. Progressive wear and tear of articular cartilage can lead to progressive tissue loss, further exposing the bony ends and leaving them unprotected, which may ultimately cause osteoarthritis (degenerative joint disease). Unlike other self-repairing tissues, cartilage has a low regenerative capacity; once injured, the cartilage is much more difficult to heal. Consequently, developing methods to repair this defect remains a challenge in clinical practice. In recent years, tissue engineering applications have employed the use of three-dimensional (3D) porous scaffolds for growing cells to regenerate damaged cartilage. However, these scaffolds are mainly chemically synthesized polymers or are crosslinked using organic solvents. Utilizing 3D printing technologies to prepare biodegradable natural composite scaffolds could replace chemically synthesized polymers with more natural polymers or low-toxicity crosslinkers. In this study, collagen/oligomeric proanthocyanidin/oxidized hyaluronic acid composite scaffolds showing high biocompatibility and excellent mechanical properties were prepared. The compressive strengths of the scaffolds were between 0.25–0.55 MPa. Cell viability of the 3D scaffolds reached up to 90%, which indicates that they are favorable surfaces for the deposition of apatite. An in vivo test was performed using the Sprague Dawley (SD) rat skull model. Histological images revealed signs of angiogenesis and new bone formation. Therefore, 3D collagen-based scaffolds can be used as potential candidates for articular cartilage repair.

Multifaceted role of phyto-derived polyphenols in nanodrug delivery systems

As naturally occurring bioactive products, several lines of evidence have shown the potential of polyphenols in the medical intervention of various diseases, including tumors, inflammatory diseases, and cardiovascular diseases. Notably, owing to the particular molecular structure, polyphenols can combine with proteins, metal ions, polymers, and nucleic acids providing better strategies for polyphenol-delivery strategies. This contributes to the inherent advantages of polyphenols as important functional components for other drug delivery strategies, e.g., protecting nanodrugs from oxidation as a protective layer, improving the physicochemical properties of carbohydrate polymer carriers, or being used to synthesize innovative functional delivery vehicles. Polyphenols have emerged as a multifaceted player in novel drug delivery systems, both as therapeutic agents delivered to intervene in disease progression and as essential components of drug carriers. Although an increasing number of studies have focused on polyphenol-based nanodrug delivery including epigallocatechin-3-gallate, curcumin, resveratrol, tannic acid, and polyphenol-related innovative preparations, these molecules are not without inherent shortcomings. The active biochemical characteristics of polyphenols constitute a prerequisite to their high-frequency use in drug delivery systems and likewise to provoke new challenges for the design and development of novel polyphenol drug delivery systems of improved efficacies. In this review, we focus on both the targeted delivery of polyphenols and the application of polyphenols as components of drug delivery carriers, and comprehensively elaborate on the application of polyphenols in new types of drug delivery systems. According to the different roles played by polyphenols in innovative drug delivery strategies, potential limitations and risks are discussed in detail including the influences on the physical and chemical properties of nanodrug delivery systems, and their influence on normal physiological functions inside the organism.

Hyaluronic acid conjugated nitrogen-doped graphene quantum dots for identification of human breast cancer cells

Accurate distinguish of cancer cells through fluorescence plays an important role in cancer diagnosis. Here we synthesized a blue fluorescent nitrogen-doped graphene quantum dots (N-GQDs) from citric acid and diethylamine via one-step hydrothermal synthesis method which was simple and quick to avoid by-products, and highlighted the binding sites to achieve precise combination. Due to the nitrogen element doping, amide II bond was amply obtained and abundant binding sites were provided for hyaluronic acid (HA) conjugation. N-GQDs solution with different pH value was then conjugated to HA via an amide bond for the recognition of human breast cancer cells (MCF-7 cells), and the formation of amide bond was more favorable under alkaline conditions. HA conjugated N-GQDs (HA-N-GQDs) were combined with CD44 which was over expressed on the surface of MCF-7 cells, resulting in MCF-7 cells performing stronger fluorescence. HA-N-GQDs showed high fluorescence, low toxicity, and good cytocompatibility, which held it play a role in fluorescence imaging for accurate identification of cancer cells.

Non-viral nanoparticles for RNA interference: Principles of design and practical guidelines

Ribonucleic acid interference (RNAi) is an innovative treatment strategy for a myriad of indications. Non-viral synthetic nanoparticles (NPs) have drawn extensive attention as vectors for RNAi due to their potential advantages, including improved safety, high delivery efficiency and economic feasibility. However, the complex natural process of RNAi and the susceptible nature of oligonucleotides render the NPs subject to particular design principles and requirements for practical fabrication. Here, we summarize the requirements and obstacles for fabricating non-viral nano-vectors for efficient RNAi. To address the delivery challenges, we discuss practical guidelines for materials selection and NP synthesis in order to maximize RNA encapsulation efficiency and protection against degradation, and to facilitate the cytosolic release of oligonucleotides. The current status of clinical translation of RNAi-based therapies and further perspectives for reducing the potential side effects are also reviewed.

A study of the freeze-drying process and quality evaluation of Angelica sinensis

The freeze-drying process of Angelica sinensis (Oliv.) Diels was studied and evaluated. Using a single factor investigation, drying temperature and pressure were determined as the main factors affecting the drying process. The central composite design (CCD) combined with response surface method was employed to optimize the drying process. Optimal conditions were determined to be 52 Pa, 63 °C, and a slice thickness of 5 mm. Subsequently, samples were compared in terms of chemical constituents, microstructure, and in vitro absorption profiles under different drying operations. The freeze-drying process was effective for the preservation of ferulic acid (1.82 mg/g), Z-ligustilide (13.91 mg/g), and other compositions. The porous and loose characteristic structure enabled rapid release of ferulic acid (71%, 60 min) and Z-ligustilide (32%, 60 min). Therefore, the freeze-drying method is a reasonable and efficient drying method for the dehydration of A. sinensis.

Preparation and characterization of guar gum based polyurethanes

Guar gum (plant-based polysaccharide) is a promising candidate with immense potential. It is used as emulsifier, thickener, stabilizer, and as binding agent in many industries. In the present project, it was planned to synthesize guar gum based polyurethanes by varying the amount of guar gum. Guar gum (GG) was used along with hydroxyl-terminated polybutadiene (HTPB) as soft segment, which was then reacted with isophorone diisocyanate (IPDI) to form PU pre-polymers. In last step, these -NCO terminated pre-polymers were extended with 1,4 butane diol as chain extender. The prepared polyurethane samples were then characterized by using FTIR, solid-state ¹HNMR and X-ray diffraction (XRD). Thermal behavior of the samples was studied by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Results indicated that the incorporation of guar gum in PU backbone improved its thermal behavior and crystallinity.

Lignin, lipid, protein, hyaluronic acid, starch, cellulose, gum, pectin, alginate and chitosan-based nanomaterials for cancer nanotherapy: Challenges and opportunities

Although nanotechnology-driven drug delivery systems are relatively new, they are rapidly evolving since the nanomaterials are deployed as effective means of diagnosis and delivery of assorted therapeutic agents to targeted intracellular sites in a controlled release manner. Nanomedicine and nanoparticulate drug delivery systems are rapidly developing as they play crucial roles in the development of therapeutic strategies for various types of cancer and malignancy. Nevertheless, high costs, associated toxicity and production of complexities are some of the critical barriers for their applications. Green nanomedicines have continually been improved as one of the viable approaches towards tumor drug delivery, thus making a notable impact on which considerably affect cancer treatment. In this regard, the utilization of natural and renewable feedstocks as a starting point for the fabrication of nanosystems can considerably contribute to the development of green nanomedicines. Nanostructures and biopolymers derived from natural and biorenewable resources such as proteins, lipids, lignin, hyaluronic acid, starch, cellulose, gum, pectin, alginate, and chitosan play vital roles in the development of cancer nanotherapy, imaging and management. This review uncovers recent investigations on diverse nanoarchitectures fabricated from natural and renewable feedstocks for the controlled/sustained and targeted drug/gene delivery systems against cancers including an outlook on some of the scientific challenges and opportunities in this field. Various important natural biopolymers and nanomaterials for cancer nanotherapy are covered and the scientific challenges and opportunities in this field are reviewed.

Strategies to load therapeutics into polysaccharide-based nanogels with a focus on microfluidics: A review

Nowadays nanoparticles are increasingly investigated for the targeted and controlled delivery of therapeutics, as suggested by the high number of research articles (2400 in 2000 vs 8500 in 2020). Among them, almost 2% investigated nanogels in 2020. Nanogels or nanohydrogels (NGs) are nanoparticles formed by a swollen three-dimensional network of synthetic polymers or natural macromolecules such as polysaccharides. NGs represent a highly versatile nanocarrier, able to deliver a number of therapeutics. Currently, NGs are undergoing clinical trials for the delivery of anti-cancer vaccines. Herein, the strategies to load low molecular weight drugs, (poly)peptides and genetic material into polysaccharide NGs as well as to formulate NGs-based vaccines are summarized, with a focus on the microfluidics approach.

Enhanced siRNA Delivery and Selective Apoptosis Induction in H1299 Cancer Cells by Layer-by-Layer-Assembled Se Nanocomplexes: Toward More Efficient Cancer Therapy

Nanotechnology has made an important contribution to oncology in recent years, especially for drug delivery. While many different nano-delivery systems have been suggested for cancer therapy, selenium nanoparticles (SeNPs) are particularly promising anticancer drug carriers as their core material offers interesting synergistic effects to cancer cells. Se compounds can exert cytotoxic effects by acting as pro-oxidants that alter cellular redox homeostasis, eventually leading to apoptosis induction in many kinds of cancer cells. Herein, we report on the design and synthesis of novel layer-by-layer Se-based nanocomplexes (LBL-Se-NCs) as carriers of small interfering RNA (siRNA) for combined gene silencing and apoptosis induction in cancer cells. The LBL-Se-NCs were prepared using a straightforward electrostatic assembly of siRNA and chitosan (CS) on the solid core of the SeNP. In this study, we started by investigating the colloidal stability and protection of the complexed siRNA. The results show that CS not only functioned as an anchoring layer for siRNA, but also provided colloidal stability for at least 20 days in different media when CS was applied as a third layer. The release study revealed that siRNA remained better associated with LBL-Se-NCs, with only a release of 35% after 7 days, as compared to CS-NCs with a siRNA release of 100% after 48 h, making the LBL nanocarrier an excellent candidate as an off-the-shelf formulation. When applied to H1299 cells, it was found that they can selectively induce around 32% apoptosis, while significantly less apoptosis (5.6%) was induced in NIH/3T3 normal cells. At the same time, they were capable of efficiently inducing siRNA downregulation (35%) without loss of activity 7 days post-synthesis. We conclude that LBL-Se-NCs are promising siRNA carriers with enhanced stability and with a dual mode of action against cancer cells.

Study on the Effect of Composite Nanoparticles on Corneal Epithelial Cell Immune Mechanism Based on Dectin-1 Signaling Pathway

In order to investigate the role of composite nanoparticles in the immune stage, we observed the expression of R-1 in anti-mycotic infection of human corneal epithelial cells, and divided the experiment into control group, fungal stimulation group, Gw507 blocking group and Dectin-1. In the inhibitor group, the immune effect of human corneal epithelial cells was studied. Subsequently, the expression of total R-1 and phosphorylated form of p-R-1 in each experimental group was detected by western blot method. Finally, real-time quantitative PCR was used to detect the expression of factors IL-6 and IL-8. We concluded that p-R-1 was slightly expressed in the control group. After 15 minutes of fungal stimulation, the expression level in the experimental group was significantly higher than that in the blank group, and the difference was statistically significant (p < 0.05). In the blocking group of two different inhibitors, the expression of p-R-1 was lower than that in the fungal stimulation experimental group, and the difference was statistically significant (p < 0.05). Therefore, R-1 is expressed in corneal epithelial cells and the fungus exerts its antifungal effect through the Dectin-1 signaling pathway.

Photocross-linkable Methacrylated Polypeptides and Polysaccharides for Casting, Injecting, and 3D Fabrication

For modern tissue engineering, we need not only develop new hydrogels but also suitable processing methods for them. Polypeptides and polysaccharides are potential candidates because they can be methacrylated, processed before photocross-linking, and yielded into hydrogels with given shape and form. In this study, we successfully methacrylated collagen, gelatin, hyaluronan, and alginate to 30 and 60% degree of modification. We studied methacrylated compositions (i.e., precursors) to investigate their processability. The precursors of collagen and gelatin with 60% methacrylation exhibited suitable yield stress, shear-thinning properties, and fiber-forming capability for injecting and 3D bioprinting. On the contrary, the 30% methacrylated precursors had properties suitable for casting purposes. Our study also showed that the mechanical properties of hydrogels corresponded to the used photocross-linking conditions and the degree of modification. These results underline the importance of tunability of the precursors and resulting hydrogels according to the specific fabrication method and tissue engineering application.

Lepidium meyenii Walpers polysaccharide and its cationic derivative re-educate tumor-associated macrophages for synergistic tumor immunotherapy

In the current study, we developed a synergistic chemo-immunotherapy using doxorubicin (Dox) and a natural polysaccharide as immunomodulator. First, we isolated a polysaccharide (MPW) from the root of Lepidium meyenii Walp. (maca) and characterized its chemical properties. MPW contains → 4) -α-D-Glcp- (1 → glycosidic bonds, while the terminal α-D-Glcp- (1 → group is connected to the main chain through an O-6 bond. This polysaccharide was then modified by cationization (C-MPW) to enhance immunoregulatory activity. MPW and C-MPW were combined with Dox and their chemo-immunotherapy effects on 4T1 tumor-bearing mice were assessed. Results indicated that the combination of MPW/C-MPW exerted a stronger anti-tumor effect than Dox alone, while reducing systemic toxicity and inhibiting tumor metastasis. In addition, MPW and C-MPW exerted tumor immunotherapy effects through the NF-κB, STAT1, and STAT3 signaling pathways, redirecting TAMs to the M1 phenotype that facilitates immunological responses against tumors. As a result, the immunosuppressive tumor microenvironment was remodeled into an immune-activated state due to enhanced secretion of IL-12, TNF-α, and INF-γ. Moreover, C-MPW exerted a stronger immunomodulatory effect than MPW. In conclusion, MPW and its cationic derivative are promising tools for cancer immunotherapy.

MicroRNA-155-5p Diminishes in Vitro Ovarian Cancer Cell Viability by Targeting HIF1α Expression

Purpose: Ovarian cancer is the most lethal of gynecological malignancies. Recently, the development of microRNA (miRNA) -based therapeutics that could impact broad cellular programs, leading to inhibition of cancer cell viability, is gaining attention in the therapeutic landscape. The therapy is based on the presence of aberrant expressions of miRNA in cancer cells. Decreasing of tumor suppressor miRNA expression causes upregulation of oncoprotein, which worsens the prognosis of the ovarian cancer.

Methods: miR-155-5p mimics were carried by chitosan nanoparticles using new nanotechnology methods. Cellular uptake of miRNA was assessed by fluorescence microscope while MTT and qPCR assay were used to determine miRNA profile and the effect of CS-NP/miRNA on SKOV3 cells.

Results: Results of profiling validated using quantitative realtime-polymerase chain reaction (PCR) found one of the most altered tumor suppressor miRNAs, miR-155-5p was downregulated 892.15-fold. According to bioinformatic analysis we identified the miRNA could recognize and regulate HIF1α expression. Transfection of mimics for miR-155-5p showed significantly increased miR-155-5p endogen SKOV3 expression level compared to the control group. We found differences after transfection mimics for miR-155-5p 31.5 and 63 nanoMolar. Increasing of miR-155-5p endogen lead to diminished SKOV3 viability (by 30%; <0.05 at concentration 80 nanoMolar). These mimics may cause an increase in upregulated miR-155-5p endogen that can reduce HIF1α expression. Here we found 2-fold and 2.8-fold reduction of HIF1α expression level after transfection compared to the control group.

Conclusion: According to these findings, the mimics miR-155-5p can inhibit ovarian cancer cell proliferation by regulating HIF1α expression.

Chitosan-Shelled Nanobubbles Irreversibly Encapsulate Morpholino Conjugate Antisense Oligonucleotides and Are Ineffective for Phosphorodiamidate Morpholino-Mediated Gene Silencing of DUX4

Orphan drugs, including antisense oligonucleotides (AONs), siRNAs/miRNAs, Cas9 nuclease, and recombinant genes, have recently been made available for rare diseases. However, the main bottleneck for these new therapies is delivery. Drugs/synthetic genes need to reach the affected tissues with minimal off-target effects and immune reactions. AON molecules are currently delivered as backboned naked compounds or via viral vectors. Nanocarriers are considered promising vehicles, able to improve drug distribution by organ targeting and limiting safety issues. We tested perfluoropentane-based nanobubbles (NBs) as vehicles for loading phosphorodiamidate morpholino (PMO) AON to suppress DUX4 expression in a facioscapulohumeral muscular dystrophy cell model. In vitro cell-free analysis demonstrated a good loading capacity of PMO into NBs, while experiments in cell cultures showed lack of therapeutic effect since expression of DUX4 and its targets remained unmodified. We conclude that these types of chitosan-shelled NBs do not release PMO-AON and are therefore not ideal for PMO AON-related therapies.

Membrane-core nanoparticles for cancer nanomedicine

Cancer is one of the most severe disease burdens in modern times, with an estimated increase in the number of patients diagnosed globally from 18.1 million in 2018 to 23.6 million in 2030. Despite a significant progress achieved by conventional therapies, they have limitations and are still far from ideal. Therefore, safe, effective and widely-applicable treatments are urgently needed. Over the past decades, the development of novel delivery approaches based on membrane-core (MC) nanostructures for transporting chemotherapeutics, nucleic acids and immunomodulators has significantly improved anticancer efficacy and reduced side effects. In this review, the formulation strategies based on MC nanostructures for delivery of anticancer drug are described, and recent advances in the application of MC nanoformulations to overcome the delivery hurdles for clinical translation are discussed.

Engineering Biomaterials with Micro/Nanotechnologies for Cell Reprogramming

Cell reprogramming is a revolutionized biotechnology that offers a powerful tool to engineer cell fate and function for regenerative medicine, disease modeling, drug discovery, and beyond. Leveraging advances in biomaterials and micro/nanotechnologies can enhance the reprogramming performance in vitro and in vivo through the development of delivery strategies and the control of biophysical and biochemical cues. In this review, we present an overview of the state-of-the-art technologies for cell reprogramming and highlight the recent breakthroughs in engineering biomaterials with micro/nanotechnologies to improve reprogramming efficiency and quality. Finally, we discuss future directions and challenges for reprogramming technologies and clinical translation.

Rekindling RNAi Therapy: Materials Design Requirements for In Vivo siRNA Delivery

With the recent FDA approval of the first siRNA-derived therapeutic, RNA interference (RNAi)-mediated gene therapy is undergoing a transition from research to the clinical space. The primary obstacle to realization of RNAi therapy has been the delivery of oligonucleotide payloads. Therefore, the main aims is to identify and describe key design features needed for nanoscale vehicles to achieve effective delivery of siRNA-mediated gene silencing agents in vivo. The problem is broken into three elements: 1) protection of siRNA from degradation and clearance; 2) selective homing to target cell types; and 3) cytoplasmic release of the siRNA payload by escaping or bypassing endocytic uptake. The in vitro and in vivo gene silencing efficiency values that have been reported in publications over the past decade are quantitatively summarized by material type (lipid, polymer, metal, mesoporous silica, and porous silicon), and the overall trends in research publication and in clinical translation are discussed to reflect on the direction of the RNAi therapeutics field.

Marine Polysaccharides in Pharmaceutical Applications: Fucoidan and Chitosan as Key Players in the Drug Delivery Match Field

The use of marine-origin polysaccharides has increased in recent research because they are abundant, cheap, biocompatible, and biodegradable. These features motivate their application in nanotechnology as drug delivery systems; in tissue engineering, cancer therapy, or wound dressing; in biosensors; and even water treatment. Given the physicochemical and bioactive properties of fucoidan and chitosan, a wide range of nanostructures has been developed with these polysaccharides per se and in combination. This review provides an outline of these marine polysaccharides, including their sources, chemical structure, biological properties, and nanomedicine applications; their combination as nanoparticles with descriptions of the most commonly used production methods; and their physicochemical and biological properties applied to the design of nanoparticles to deliver several classes of compounds. A final section gives a brief overview of some biomedical applications of fucoidan and chitosan for tissue engineering and wound healing.

Carbohydrate-based nanocarriers and their application to target macrophages and deliver antimicrobial agents

Many deadly infections are produced by microorganisms capable of sustained survival in macrophages. This reduces exposure to chemadrotherapy, prevents immune detection, and is akin to criminals hiding in police stations. Therefore, the use of glyco-nanoparticles (GNPs) as carriers of therapeutic agents is a burgeoning field. Such an approach can enhance the penetration of drugs into macrophages with specific carbohydrate targeting molecules on the nanocarrier to interact with macrophage lectins. Carbohydrates are natural biological molecules and the key constituents in a large variety of biological events such as cellular communication, infection, inflammation, enzyme trafficking, cellular migration, cancer metastasis and immune functions. The prominent characteristics of carbohydrates including biodegradability, biocompatibility, hydrophilicity and the highly specific interaction of targeting cell-surface receptors support their potential application to drug delivery systems (DDS). This review presents the 21^st century development of carbohydrate-based nanocarriers for drug targeting of therapeutic agents for diseases localized in macrophages. The significance of natural carbohydrate-derived nanoparticles (GNPs) as anti-microbial drug carriers is highlighted in several areas of treatment including tuberculosis, salmonellosis, leishmaniasis, candidiasis, and HIV/AIDS.

Biodegradable Polymers for Gene Delivery

The cellular transport process of DNA is hampered by cell membrane barriers, and hence, a delivery vehicle is essential for realizing the potential benefits of gene therapy to combat a variety of genetic diseases. Virus-based vehicles are effective, although immunogenicity, toxicity and cancer formation are among the major limitations of this approach. Cationic polymers, such as polyethyleneimine are capable of condensing DNA to nanoparticles and facilitate gene delivery. Lack of biodegradation of polymeric gene delivery vehicles poses significant toxicity because of the accumulation of polymers in the tissue. Many attempts have been made to develop biodegradable polymers for gene delivery by modifying existing polymers and/or using natural biodegradable polymers. This review summarizes mechanistic aspects of gene delivery and the development of biodegradable polymers for gene delivery.

Chitosan enhances gene delivery of oligonucleotide complexes with magnetic nanoparticles-cell-penetrating peptide

Gene-based therapies, including the delivery of oligonucleotides, offer promising methods for the treatment of cancer cells. However, they have various limitations including low efficiency. Herein, cell-penetrating peptides (CPPs)-conjugated chitosan-modified iron oxide magnetic nanoparticles (CPPs-CTS@MNPs) with high biocompatibility as well as high efficiency were tested for the delivery of oligonucleotides such as plasmid pGL3, splice correction oligonucleotides, and small-interfering RNA. A biocompatible nanocomposite, in which CTS@MNPs was incorporated in non-covalent complex with CPPs-oligonucleotide, is developed. Modifying the surface of magnetic nanoparticles with cationic chitosan-modified iron oxide improved the performance of magnetic nanoparticles-CPPs for oligonucleotide delivery. CPPs-CTS@MNPs complexes enhance oligonucleotide transfection compared to CPPs@MNPs or CPPs. The hydrophilic character of CTS@MNPs improves complexation with plasmid pGL3, splice correction oligonucleotides, and small-interfering RNA payload, which consequently resulted in not only strengthening the colloidal stability of the constructed complex but also improving their biocompatibility. Transfection using PF14-splice correction oligonucleotides-CTS@MNPs showed sixfold increase of the transfection compared to splice correction oligonucleotides-PF14 that showed higher transfection than the commercially available lipid-based vector Lipofectamine™ 2000. Nanoscaled CPPs-CTS@MNPs comprise a new family of biomaterials that can circumvent some of the limitations of CPPs or magnetic nanoparticles.

Development of a safe and efficient gene delivery system based on a biodegradable tannic acid backbone

Finding a safe and efficient gene delivery vector is a major international challenge facing the development of gene therapy. Tannic acid (TA) is a natural cross-linker owing to its hydroxyl and carboxyl groups that can interact with biopolymers for different biomaterial design. In this work, three polyethyleneimine-modified TA polymers were prepared, and the polymers were characterized by FTIR, UV-vis, elemental analysis and ¹H NMR. The potential of PTAs as gene vector was studied in vitro, including DNA loading capacity, DNA protection ability and biocompatibility. In addition, the particle size, zeta potential, DNA encapsulation efficiency, cell uptake and transfection efficiency of the PTA-pDNA polyplexes were also studied. The results showed that PTA2k and PTA30k could completely condense DNA at N/P of 2, and PTA600 could only completely condense DNA at N/P of 50. The PTA/pDNA polyplexes could protect DNA from degrading by DNA enzymes and could be efficiently uptaked by cells. Biocompatibility assay showed that PTA had no significant cytotoxicity and effect on cell proliferation compared to PEI. At low N/P ratios of 1-4, PTA showed higher transfection efficiency than PEI, and the transfection efficiency increased with the increase of PEI molecular weight in PTA. At N/P of 3, PTA30k showed the highest transfection efficiency of 23.8%, while PEI30k showed only 6.7%. These results indicate that PTA is a promising candidate vector for safe and efficient gene delivery.

Natural Polysaccharides for siRNA Delivery: Nanocarriers Based on Chitosan, Hyaluronic Acid, and Their Derivatives

Natural polysaccharides are frequently used in the design of drug delivery systems due to their biocompatibility, biodegradability, and low toxicity. Moreover, they are diverse in structure, size, and charge, and their chemical functional groups can be easily modified to match the needs of the final application and mode of administration. This review focuses on polysaccharidic nanocarriers based on chitosan and hyaluronic acid for small interfering RNA (siRNA) delivery, which are highly positively and negatively charged, respectively. The key properties, strengths, and drawbacks of each polysaccharide are discussed. In addition, their use as efficient nanodelivery systems for gene silencing applications is put into context using the most recent examples from the literature. The latest advances in this field illustrate effectively how chitosan and hyaluronic acid can be modified or associated with other molecules in order to overcome their limitations to produce optimized siRNA delivery systems with promising in vitro and in vivo results.