Applications of Raman spectroscopy in skin research--From skin physiology and diagnosis up to risk assessment and dermal drug delivery

In Situ Imaging of Subcutaneous Drug Delivery Systems Using Microspatially Offset Low-Frequency Raman Spectroscopy

The noninvasive in situ monitoring of the status of drug retention and implant integrity of subcutaneous implants would allow optimization of therapy and avoid periods of subtherapeutic delivery kinetics. A proof-of principle study was conducted to determine the use of microspatially offset low-frequency Raman spectroscopy (micro-SOLFRS) for nonintrusive in situ analysis of subcutaneous drug delivery systems. Caffeine was used as the model drug, and it was embedded in a circular-shape Soluplus matrix via vacuum compression molding. For the exploratory analysis, prototype implants were positioned underneath skin tissue samples, and various caffeine concentrations (1-50% w/w) and micro-SOLFRS displacement settings (Δz = 0-8 mm) were tested from the pseudo three-dimensional (3D)-imaging perspective. This format allowed the optimization of real-time micro-SOLFRS analysis of implants through skin tissue that was embedded in an agarose hydrogel. Notably, this analytical approach allowed the temporal and spatial erosion of the implant and solid-state transformations of caffeine to be distinguished. The spectrometric results correlated with complementary high-performance liquid chromatography (HPLC) determination of changes in drug concentration, illustrating drug dissipation/diffusion characteristics. The discovered capability of micro-SOLFRS for in situ measurements of drugs and implants makes it attractive for biomedical diagnostics that, ultimately, could result in development of a new point-of-care technology.

Reverse Iontophoresis: Noninvasive Assessment of Topical Drug Bioavailability

Assessing drug disposition in the skin after the application of a topical formulation is difficult. It is hypothesized that reverse iontophoresis (RI), which can extract charged/polar molecules for monitoring purposes, may provide a noninvasive approach for the assessment of local drug bioavailability. The passive and RI extraction of salicylic acid (SA) and nicotine (NIC) from porcine skin in vitro was assessed after a simple solution of the former and a transdermal patch of the latter had been applied for 24 and 8 h, respectively. Immediately after this "passive skin loading", the amount of drug in the stratum corneum (SC) and "viable" tissue (VT) was measured either (a) after tape-stripping and subsequent solvent extraction of both skin layers or (b) following RI extraction over 4 h. Parallel experiments were then performed in vivo in healthy volunteers; in this case, the VT was not sampled and the skin loading period for NIC was only 4 h. RI extraction of both drugs was significantly higher (in vitro and in vivo) than that achieved passively, and the cumulative RI extraction profiles as a function of time were mathematically analyzed using a straightforward compartmental model. Best-fit estimates of drug amounts in the SC and VT (ASC,0 and AVT,0, respectively) at the end of "loading" and two first-order rate constants describing transfer between the model compartments were then determined. The in vitro predictions of ASC,0 and AVT,0 were in excellent agreement with the experimental results, as was the value of the former in vivo. The rate constants derived from the in vitro and in vivo results were also similar. In summary, the results provide proof-of-concept that the RI method has the potential to noninvasively assess relevant metrics of drug bioavailability in the skin.

Unravelling host-pathogen interactions by biofilm infected human wound models

Approximately 80 % of persistent wound infections are affected by the presence of bacterial biofilms, resulting in a severe clinical challenge associated with prolonged healing periods, increased morbidity, and high healthcare costs. Unfortunately, in vitro models for wound infection research almost exclusively focus on early infection stages with planktonic bacteria. In this study, we present a new approach to emulate biofilm-infected human wounds by three-dimensional human in vitro systems. For this purpose, a matured biofilm consisting of the clinical key wound pathogen Pseudomonas aeruginosa was pre-cultivated on electrospun scaffolds allowing for non-destructive transfer of the matured biofilm to human in vitro wound models. We infected tissue-engineered human in vitro skin models as well as ex vivo human skin explants with the biofilm and analyzed structural tissue characteristics, biofilm growth behavior, and biofilm-tissue interactions. The structural development of biofilms in close proximity to the tissue, resulting in high bacterial burden and in vivo-like morphology, confirmed a manifest wound infection on all tested wound models, validating their applicability for general investigations of biofilm growth and structure. The extent of bacterial colonization of the wound bed, as well as the subsequent changes in molecular composition of skin tissue, were inherently linked to the characteristics of the underlying wound models including their viability and origin. Notably, the immune response observed in viable ex vivo and in vitro models was consistent with previous in vivo reports. While ex vivo models offered greater complexity and closer similarity to the in vivo conditions, in vitro models consistently demonstrated higher reproducibility. As a consequence, when focusing on direct biofilm-skin interactions, the viability of the wound models as well as their advantages and limitations should be aligned to the particular research question of future studies. Altogether, the novel model allows for a systematic investigation of host-pathogen interactions of bacterial biofilms and human wound tissue, also paving the way for development and predictive testing of novel therapeutics to combat biofilm-infected wounds.

Acceleration of high-quality Raman imaging via a locality enhanced transformer network

Raman imaging (RI) is an outstanding technique that enables molecular-level medical diagnostics and therapy assessment by providing characteristic fingerprint and morphological information about molecules. However, obtaining high-quality Raman images generally requires a long acquisition time, up to hours, which is prohibitive for RI applications of timely cytopathology and histopathology analyses. To address this issue, image super-resolution (SR) based on deep learning, including convolutional neural networks and transformers, has been widely recognized as an effective solution to reduce the time required for achieving high-quality RI. In this study, a locality enhanced transformer network (LETNet) is proposed to perform Raman image SR. Specifically, the general architecture of the transformer is adopted with the replacement of self-attention by convolution to generate high-fidelity and detailed SR images. Additionally, the convolution in the LETNet is further optimized by utilizing depth-wise convolution to improve the computational efficiency of the model. Experiments on hyperspectral Raman images of breast cancer cells and Raman images of a few channels of brain tumor tissues demonstrate that the LETNet achieves superior 2×, 4×, and 8× SR with fewer parameters compared with other SR methods. Consequently, high-quality Raman images can be obtained with a significant reduction in time, ranging from 4 to 64 times. Overall, the proposed method provides a novel, efficient, and reliable solution to expedite high-quality RI and promote its application in real-time diagnosis and therapy.

Visualisation of drug distribution in skin using correlative optical spectroscopy and mass spectrometry imaging

A correlative methodology for label-free chemical imaging of soft tissue has been developed, combining non-linear optical spectroscopies and mass spectrometry to achieve sub-micron spatial resolution and critically improved drug detection sensitivity. The approach was applied to visualise the kinetics of drug reservoir formation within human skin following in vitro topical treatment with a commercial diclofenac gel. Non-destructive optical spectroscopic techniques, namely stimulated Raman scattering, second harmonic generation and two photon fluorescence microscopies, were used to provide chemical and structural contrast. The same tissue sections were subsequently analysed by secondary ion mass spectrometry, which offered higher sensitivity for diclofenac detection throughout the epidermis and dermis. A method was developed to combine the optical and mass spectrometric datasets using image registration techniques. The label-free, high-resolution visualisation of tissue structure coupled with sensitive chemical detection offers a powerful method for drug biodistribution studies in the skin that impact directly on topical pharmaceutical product development.

Optimization of diffuse Raman spectroscopy for in-vivo quantification of foreign body response in a small animal model

Diffuse Raman spectroscopy (DRS) allows subsurface molecular analysis of optically turbid samples. Numerical modeling of light propagation was used as a method for improving the design of an DRS instrument to maximize the signal to noise ratio (SNR) while ensuring safe laser exposure parameters required for in-vivo measurements. Experimental validation of the model was performed on both phantom samples and disks implanted postmortem to mimic the typical response to foreign bodies (formation of a fibrotic capsule around an implant). A reduction of laser exposure of over 1500-fold was achieved over previous studies whilst maintaining the same Raman collection rates and reaching the safe power density of 3 mW/mm2. The validation of this approach in a subcutaneous implant in a mouse cadaver showed a further improvement of 1.5-fold SNR, with a thickness limit of detection for the fibrotic layer of 23 µm, under the same acquisition times. In the animal body, a thickness limit of detection of 16 µm was achieved. These results demonstrate the feasibility of numerical model-based optimization for DRS, and that the technique can be improved sufficiently to be used for in-vivo measurement of collagenous capsule formation as a result of the foreign body response in murine models.

Recent advances and applications of laser-based imaging techniques in food crops and products: a critical review

To meet the growing demand for food quality and safety, there is a pressing need for fast and visible techniques to monitor the food crop and product production processing, and to understand the chemical changes that occur during these processes. Herein, the fundamental principles, instruments, and characteristics of three major laser-based imaging techniques (LBITs), namely, laser-induced breakdown spectroscopy, Raman spectroscopy, and laser ablation-inductively coupled plasma-mass spectrometry, are introduced. Additionally, the advances, challenges, and prospects for the application of LBITs in food crops and products are discussed. In recent years, LBITs have played a crucial role in mapping primary metabolites, secondary metabolites, nanoparticles, toxic metals, and mineral elements in food crops, as well as visualizing food adulteration, composition changes, pesticide residue, microbial contamination, and elements in food products. However, LBITs are still facing challenges in achieving accurate and sensitive quantification of compositions due to the complex sample matrix and minimal laser sampling quantity. Thus, further research is required to develop comprehensive data processing strategies and signal enhancement methods. With the continued development of imaging methods and equipment, LBITs have the potential to further explore chemical distribution mechanisms and ensure the safety and quality of food crops and products.

Confocal Raman Spectroscopic Characterization of Dermatopharmacokinetics Ex Vivo

Confocal Raman spectroscopy is being assessed as a tool with which to quantify the rate and extent of drug uptake to and its clearance from target sites of action within the viable epidermis below the skin's stratum corneum (SC) barrier. The objective of this research was to confirm that Raman can interrogate drug disposition within the living layers of the skin (where many topical drugs elicit their pharmacological effects) and to identify procedures by which Raman signal attenuation with increasing skin depth may be corrected and normalized so that metrics descriptive of topical bioavailability may be identified. It was first shown in experiments on skin cross-sections parallel to the skin surface that the amide I signal, originating primarily from keratin, was quite constant with depth into the skin and could be used to correct for signal attenuation when confocal Raman data were acquired in a "top-down" fashion. Then, using 4-cyanophenol (CP) as a model skin penetrant with a strong Raman-active C≡N functionality, a series of uptake and clearance experiments, performed as a function of time, demonstrated clearly that normalized spectroscopic data were able to detect the penetrant to at least 40-80 μm into the skin and to distinguish the disposition of CP from different vehicles. Metrics related to local bioavailability (and potentially bioequivalence) included areas under the normalized C≡N signal versus depth profiles and elimination rate constants deduced post-removal of the formulations. Finally, Raman measurements were made with an approved dermatological drug, crisaborole, for which delivery from a fully saturated formulation into the skin layers just below the SC was detectable.

Optical Methods for Non-Invasive Determination of Skin Penetration: Current Trends, Advances, Possibilities, Prospects, and Translation into In Vivo Human Studies

Information on the penetration depth, pathways, metabolization, storage of vehicles, active pharmaceutical ingredients (APIs), and functional cosmetic ingredients (FCIs) of topically applied formulations or contaminants (substances) in skin is of great importance for understanding their interaction with skin targets, treatment efficacy, and risk assessment-a challenging task in dermatology, cosmetology, and pharmacy. Non-invasive methods for the qualitative and quantitative visualization of substances in skin in vivo are favored and limited to optical imaging and spectroscopic methods such as fluorescence/reflectance confocal laser scanning microscopy (CLSM); two-photon tomography (2PT) combined with autofluorescence (2PT-AF), fluorescence lifetime imaging (2PT-FLIM), second-harmonic generation (SHG), coherent anti-Stokes Raman scattering (CARS), and reflectance confocal microscopy (2PT-RCM); three-photon tomography (3PT); confocal Raman micro-spectroscopy (CRM); surface-enhanced Raman scattering (SERS) micro-spectroscopy; stimulated Raman scattering (SRS) microscopy; and optical coherence tomography (OCT). This review summarizes the state of the art in the use of the CLSM, 2PT, 3PT, CRM, SERS, SRS, and OCT optical methods to study skin penetration in vivo non-invasively (302 references). The advantages, limitations, possibilities, and prospects of the reviewed optical methods are comprehensively discussed. The ex vivo studies discussed are potentially translatable into in vivo measurements. The requirements for the optical properties of substances to determine their penetration into skin by certain methods are highlighted.

Measurement of chemical penetration in skin using Stimulated Raman scattering microscopy and multivariate curve resolution - alternating least squares

The mechanistic understanding of skin penetration underpins the design, efficacy and risk assessment of many high-value products including functional personal care products, topical and transdermal drugs. Stimulated Raman scattering (SRS) microscopy, a label free chemical imaging tool, combines molecular spectroscopy with submicron spatial information to map the distribution of chemicals as they penetrate the skin. However, the quantification of penetration is hampered by significant interference from Raman signals of skin constituents. This study reports a method for disentangling exogeneous contributions and measuring their permeation profile through human skin combining SRS measurements with chemometrics. We investigated the spectral decomposition capability of multivariate curve resolution - alternating least squares (MCR-ALS) using hyperspectral SRS images of skin dosed with 4-cyanophenol. By performing MCR-ALS on the fingerprint region spectral data, the distribution of 4-cyanophenol in skin was estimated in an attempt to quantify the amount permeated at different depths. The reconstructed distribution was compared with the experimental mapping of CN, a strong vibrational peak in 4-cyanophenol where the skin is spectroscopically silent. The similarity between MCR-ALS resolved and experimental distribution in skin dosed for 4 h was 0.79 which improved to 0.91 for skin dosed for 1 h. The correlation was observed to be lower for deeper layers of skin where SRS signal intensity is low which is an indication of low sensitivity of SRS. This work is the first demonstration, to the best of our knowledge, of combining SRS imaging technique with spectral unmixing methods for direct observation and mapping of the chemical penetration and distribution in biological tissues.

Non-invasive evaluation of transdermal drug delivery using 3-D transient triplet differential (TTD) photoacoustic imaging

Transdermal drug delivery (TDD) is less invasive and avoids first-pass metabolism, making it an attractive method for treating various diseases such as diabetes and hypertension. However, current methods for evaluating TDD systems lack in vivo descriptions of drug distribution in the skin. In this study, we demonstrate the capability of the Transient Triplet Differential (TTD) method, a non-invasive and background-free photoacoustic imaging technique, for accurately mapping drug distribution and evaluating different TDD systems. Our findings show that the TTD method can provide high sensitivity and specificity for targeted drug extraction and visualize 3D drug distribution in the skin. Furthermore, in vivo experiments confirmed the potential of the TTD method in evaluating the clinical performance of TDD. It's predictable that the TTD method can be a reliable and non-invasive approach for evaluating TDD systems and offer valuable insights into TDD research and development.

The Biochemical Characteristics in Experimental Keratomycosis

PURPOSE

To investigate the biochemical characteristics in experimental keratomycosis.

METHODS

Experimental mice were injected with Fusarium solanum solution Controls mice received liposomes containing phosphate-buffered saline (PBS-LIP). Raman spectroscopy was used to analyze the biochemical characteristics. The infiltration of inflammatory cells was analyzed by histopathology. Cytokine mRNA levels were detected by real-time polymerase chain reaction.

RESULTS

Raman Spectroscopy: In the experimental group, collagen, lipids, amide I and III were decreased, amide II, hyper proline amino acids, and arginine were increased, and proline and phenylalanine were significantly increased on day 3. Histopathology: more severe keratomycosis developed in the experimental group than in the control group. Statistically significant mRNA expression of Collagen4\MMP2\MMP9\TIMP1.MMP9 was negatively correlated with the secretion of Collagen4.

CONCLUSIONS

Matrix metalloproteinases are involved in biochemical changes in keratomycosis.

Spectral Features Differentiate Aging-Induced Changes in Parchment-A Combined Approach of UV/VIS, µ-ATR/FTIR and µ-Raman Spectroscopy with Multivariate Data Analysis

From the moment of production, artworks are constantly exposed to changing environmental factors potentially inducing degradation. Therefore, detailed knowledge of natural degradation phenomena is essential for proper damage assessment and preservation. With special focus on written cultural heritage, we present a study on the degradation of sheep parchment employing accelerated aging with light (295-3000 nm) for one month, 30/50/80% relative humidity (RH) and 50 ppm sulfur dioxide with 30/50/80%RH for one week. UV/VIS spectroscopy detected changes in the sample surface appearance, showing browning after light-aging and increased brightness after SO₂-aging. Band deconvolution of ATR/FTIR and Raman spectra and factor analysis of mixed data (FAMD) revealed characteristic changes of the main parchment components. Spectral features for degradation-induced structural changes of collagen and lipids turned out to be different for the employed aging parameters. All aging conditions induced denaturation (of different degrees) indicated by changes in the secondary structure of collagen. Light treatment resulted in the most pronounced changes for collagen fibrils in addition to backbone cleavage and side chain oxidations. Additional increased disorder for lipids was observed. Despite shorter exposure times, SO₂-aging led to a weakening of protein structures induced by transitions of stabilizing disulfide bonds and side chain oxidations.

Surface-enhanced Raman scattering (SERS) by gold nanoparticle characterizes dermal thickening by collagen in bleomycin-treated skin ex vivo

PURPOSE

Current skin imaging modalities, including optical, electron, and confocal microscopy, mostly require tissue fixations that could damage proteins and biological molecules. Live tissue or cell imaging such as ultrasonography and optical coherent microscope may not adequately measure the dynamic spectroscopical changes. Raman spectroscopy has been adopted for skin imaging in vivo, mostly for skin cancer imaging. However, whether the epidermal and dermal thickening in skin could be measured and distinguished by conventional Ramen spectroscopy or the surface-enhanced Raman scattering (SERS), a rapid and label-free method for noninvasive measurement remains unknown.

METHODS

Human skin sections from patients of atopic dermatitis and keloid, which represent epidermal and dermal thickening, respectively, were measured by conventional Ramen spectroscopy. In mice, skin sections from imiquimod (IMQ)- and bleomycin (BLE)-treated mice, which reflect the epidermal and dermal thickening, respectively, were measured by SERS, that incorporates gold nanoparticles to generate surface plasma and enhance Raman signals.

RESULTS

Conventional Ramen spectroscopy failed to consistently show the Raman shift in human samples among the different groups. SERS successfully revealed a prominent peak around 1300 cm-1 in the IMQ-treated skin; and two significant peaks around 1100 and 1300 cm-1 in BLE-treated group. Further quantitative analysis showed 1100 cm-1 peak was significantly accentuated in the BLE-treated skin than that in control skin. SERS identified in vitro a similar 1100 cm-1 peak in solutions of collagen, the major dermal biological molecules.

CONCLUSION

SERS distinguishes the epidermal or dermal thickening in mouse skin with rapid and label-free measures. A prominent 1100 cm-1 SERS peak in the BLE-treated skin may result from collagen. SERS might help precision diagnosis in the future.

A statistical machine learning approach linking molecular conformational changes to altered mechanical characteristics of skin due to thermal injury

This article develops statistical machine learning models to predict the mechanical properties of skin tissue subjected to thermal injury based on the Raman spectra associated with conformational changes of the molecules in the burned tissue. Ex vivo porcine skin tissue samples were exposed to controlled burn conditions at 200 °F for five different durations: (i) 10s, (ii) 20s, (iii) 30s, (iv) 40s, and (v) 50s. For each burn condition, Raman spectra of wavenumbers 500-2000 cm^-1 were measured from the tissue samples, and tensile testing on the same samples yielded their material properties, including, ultimate tensile strain, ultimate tensile stress, and toughness. Partial least squares regression models were established such that the Raman spectra, describing conformational changes in the tissue, could accurately predict ultimate tensile stress, toughness, and ultimate tensile strain of the burned skin tissues with R² values of 0.8, 0.8, and 0.7, respectively, using leave-two-out cross validation scheme. An independent assessment of the resultant models showed that amino acids, proteins & lipids, and amide III components of skin tissue significantly influence the prediction of the properties of the burned skin tissue. In contrast, amide I has a lesser but still noticeable effect. These results are consistent with similar observations found in the literature on the mechanical characterization of burned skin tissue.

Quantification of Drugs in Brain and Liver Mimetic Tissue Models Using Raman Spectroscopy

Quantitative analysis of drug delivery with in biological systems is an integral challenge in drug development. Analytical techniques are important for assessing both drug target delivery, target action, and drug toxicology. Using mimetic tissue models, we have investigated the efficacy of Raman spectroscopy in quantitative detection of alkyne group and deuterated drugs in rat brain and rat liver tissue models. Lasers with 671 nm and 785 nm wavelengths were assessed for their feasibility in this application due to opposing relative benefits and disadvantages. Thin tissue sections have been tested as a practical means of reducing autofluorescent background by minimizing out-of-focus tissue and therefore maximizing photobleaching rates. Alkyne-tagged drugs were quantitatively measured at 18 ± 5 μg/g drug/tissue mass ratio in rat brain and at 34 ± 6 μg/g in rat liver. Quantification calibration curves were generated for a range of concentrations from 0-500 μg/g. These results show the potential of Raman spectroscopy as a diffraction-limited spatially resolved imaging technique for assessing drug delivery in tissue applications.

Quantitative determination of concentration profiles of skin components and topically applied oils by tailored multivariate curve resolution-alternating least squares using in vivo confocal Raman micro-spectroscopy

The main components of the stratum corneum (SC), water, lipids, and proteins, are non-homogeneously distributed throughout the depth. The quantitative determination of their concentration profiles and penetration depth of topically applied substances are urgent topics of dermatological and cosmetic research. Confocal Raman micro-spectroscopy has distinct advantages when determining semi-quantitative concentrations of SC components and topically applied substances non-invasively and in vivo. In this work, we applied a tailored multivariate curve resolution-alternating least squares (tMCR-ALS) method to analyze Raman spectra of the SC in the 2000-4000 cm-1 region for quantitatively determining the concentrations of water, lipids, proteins, and topically applied oils using substance-related spectral loadings which were allowed to change depth-dependently from the SC's surface toward its bottom. tMCR-ALS makes matching of depth-dependent signal attenuation, that is, the normalization on keratin, unnecessary and requires only a few additional experiments for calibration - Raman spectra of the pure materials and their densities.

In vivo analysis of the stratum corneum of Japanese neonates and infants using confocal Raman spectroscopy: a pilot study

BACKGROUND

Physiological skin properties of neonates and infants change drastically after birth and are implicated in the onset of atopic dermatitis and other diseases. Studies have measured physiological skin properties in infants; however, how these properties change over time remains unclear. No reports have measured ceramide in the stratum corneum of infants using confocal Raman spectroscopy; hence, we used it to measure the physiological properties of the skin, including ceramide, in infants.

MATERIALS AND METHODS

The water content and other factors in the skin of infants aged 0, 1, and 6 months were measured. All measurements were performed five times indoors at 22 ± 2°C and 50% ± 10% relative humidity in the middle of the calf at 4-µm distances, and their mean was calculated.

RESULTS

The water content of the area between the skin surface and superficial layers was the lowest in newborns as compared with other ages, and the deeper the skin layer, the higher the water content. The stratum corneum, evaluated using confocal Raman spectroscopy, was the thickest in newborns and gradually thinned with age. Its water content was the lowest in newborns. The levels of natural moisturizing factor, ceramide, and cholesterol were higher in newborns and tended to decrease with age.

CONCLUSION

This report is the first to evaluate ceramide in the stratum corneum of infants using confocal Raman spectroscopy and could help in conducting subsequent longitudinal measurements of physiological skin properties in neonates and infants.

Dermal Delivery of Diclofenac Sodium-In Vitro and In Vivo Studies

Previously, we reported the use of confocal Raman spectroscopy (CRS) as a novel non-invasive approach to determine drug disposition in the skin in vivo. Results obtained by CRS were found to correlate with data from the well-established in vitro permeation test (IVPT) model using human epidermis. However, these studies used simple vehicles comprising single solvents and binary or ternary solvent mixtures; to date, the utility of CRS for monitoring dermal absorption following application of complex marketed formulations has not been examined. In the present work, skin delivery of diclofenac sodium (DFNa) from two topical dermatological drug products, namely Diclac® Lipogel 10 mg/g and Primofenac® Emulsion gel 1%, was determined by IVPT and in vivo by both CRS and tape stripping (TS) methodologies under similar experimental conditions. The in vivo data were evaluated against the in vitro findings, and a direct comparison between CRS and TS was performed. Results from all methodologies showed that Diclac promoted significantly greater DFNa delivery to the skin (p < 0.05). The cumulative amounts of DFNa which permeated at 24 h in vitro for Diclac (86.5 ± 9.4 µg/cm2) were 3.6-fold greater than the corresponding amounts found for Primofenac (24.4 ± 2.7 µg/cm2). Additionally, total skin uptake of DFNa in vivo, estimated by the area under the depth profiles curves (AUC), or the signal intensity of the drug detected in the upper stratum corneum (SC) (4 µm) ranged from 3.5 to 3.6-fold greater for Diclac than for Primofenac. The shape of the distribution profiles and the depth of DFNa penetration to the SC estimated by CRS and TS were similar for the two methods. However, TS data indicated a 4.7-fold greater efficacy of Diclac relative to Primofenac, with corresponding total amounts of drug penetrated, 94.1 ± 22.6 µg and 20.2 ± 7.0 µg. The findings demonstrate that CRS is a methodology that is capable of distinguishing skin delivery of DFNa from different formulations. The results support the use of this approach for non-invasive evaluation of topical products in vivo. Future studies will examine additional formulations with more complex compositions and will use a wider range of drugs with different physicochemical properties. The non-invasive nature of CRS coupled with the ability to monitor drug permeation in real time offer significant advantages for testing and development of topical dermatological products.

Raman Spectroscopic Tools to Probe the Skin-(Trans)dermal Formulation Interface

Medicines designed to deliver the active pharmaceutical ingredient either into or through the skin─often referred to as topicals and transdermals, respectively─are generally considered to be complex drug products. A particular challenge faced by these formulations is identifying a suitable method (ideally, in terms of specificity, accuracy, precision, and robustness) or combination of methods with which to assess the amount and rate of drug delivery to the target site. Significant research currently aims to identify and validate relevant and minimally invasive techniques that can be used to quantify both the levels of the drug attained within different parts of the skin and the kinetics with which the drug is taken up into the skin and cleared therefrom into the systemic circulation. Here, the application of confocal Raman microspectroscopy and imaging to interrogate events integral to the performance of topical and transdermal drug products at the formulation-skin interface is illustrated. Visualization, depth slicing, and profiling are used (a) to elucidate key chemical properties of both the delivery system and the skin that have impact on their interaction and the manner in which drug transfer from one to the other may occur, (b) for the transformation of a drug product from that manufactured into a residual phase post-application and inunction into the skin (including the potential for important changes in solubility of the active compound), and (c) for drug absorption into the skin and its subsequent '"clearance" into deeper layers and beyond. Overall, the Raman tools described offer both qualitative and potentially semi-quantitative insights into topical and transdermal drug product performance and provide information useful for formulation improvement and optimization.

Novel aspects of Raman spectroscopy in skin research

The analytical technology of Raman spectroscopy has an almost 100‐year history. During this period, many modifications and developments happened in the method like discovery of laser, improvements in optical elements and sensitivity of spectrometer and also more advanced light detection systems. Many types of the innovative techniques appeared (e.g. Transmittance Raman spectroscopy, Coherent Raman Scattering microscopy, Surface‐Enhanced Raman scattering and Confocal Raman spectroscopy/microscopy). This review article gives a short description about these different Raman techniques and their possible applications. Then, a short statistical part is coming about the appearance of Raman spectroscopy in the scientific literature from the beginnings to these days. The third part of the paper shows the main application options of the technique (especially confocal Raman spectroscopy) in skin research, including skin composition analysis, drug penetration monitoring and analysis, diagnostic utilizations in dermatology and cosmeto‐scientific applications. At the end, the possible role of artificial intelligence in Raman data analysis and the regulatory aspect of these techniques in dermatology are briefly summarized. For the future of Raman Spectroscopy, increasing clinical relevance and in vivo applications can be predicted with spreading of non‐destructive methods and appearance with the most advanced instruments with rapid analysis time.

Improving SERS bioimaging of subcutaneous phantom in vivo with optical clearing

Surface-enhanced Raman scattering (SERS) has proven to be a promising technique for different types of imaging including preoperative and intraoperative in vivo tumor visualization. However, the strong scattering of the turbid tissue limits its use in subcutaneous areas. In this article, we used an optical clearing technique to improve the SERS signal from a subcutaneous tumor phantom. The phantom is a 2 mm sphere of calcium alginate with incorporated petal-like gap-enhanced Raman tags. The use of optical clearing increases the SERS signal target-to-background ratio for 5 times and allow to decrease the total imaging time for at least 10 times. In addition, SERS imaging assisted with optical clearing made it possible to more precisely determine the shape and boundaries of the implanted phantom. The combination of optical clearing and SERS is a promising strategy for the clinical imaging of subcutaneous objects that are usually shielded by dermal tissue.

Confocal Raman spectroscopy at different laser wavelengths in analyzing stratum corneum and skin penetration properties of mixed PEGylated emulsifier systems

Emulsifier mixtures are widely used in cosmetics and pharmaceutics and thus, brought extensive studies for their performances on skin applications. PEG-20cetyl ether (C20) is recently proposed to induce skin irritation and is of interest to study its skin interactions when mixed with other emulsifiers. PEG-2oleyl ether (O2) and PEG-20stearyl ether (S20) are selected and in specific, 50 mM of C20, O2, S20 as well as Mix1 (50 mM C20 mixed with 50 mM O2) and Mix2 (50 mM C20 mixed with 50 mM S20) solutions were applied on skin samples. Confocal Raman spectroscopy (CRS) analyses of stratum corneum (SC) thickness and SC lipid content were performed after 4 h skin treatments. In parallel, skin penetration properties were also evaluated via CRS by applying procaine solutions with/without emulsifiers on skin samples for 24 h. In terms of the CRS measurements, two excitation wavelengths of 532 nm and 785 nm are both utilized in this study and we secondly aimed to compare their results and suitability in SC and skin analyses. Based on the experimental observations, comparable results are obtained by using both excitation wavelengths of 532 nm and 785 nm demonstrating their suitability in analyzing SC and skin samples. Thereinto, 785 nm laser wavelength shows the advantage of deeper skin penetration and allows the measurements of fluorescent skin samples; 532 nm laser wavelength enables simple measurement performance without substrate and coverslip interference. With regards to the results of emulsifier mixtures, the addition of S20 and O2 reduced the skin interactions and penetration enhancing ability of C20, giving us the hint to build milder systems with emulsifier mixtures. Besides, the CRS results of stronger skin interruption were also correlated with the higher critical micelle concentration (CMC) values of emulsifiers and their mixtures, which may provide evidence in explaining the interactions between emulsifiers and skin.

Optical coherence tomography-guided confocal Raman microspectroscopy for rapid measurements in tissues

We report a joint system with both confocal Raman spectroscopy (CRS) and optical coherence tomography (OCT) modules capable of quickly addressing the region of interest in a tissue for targeted Raman measurements from OCT. By using an electrically tunable lens in the Raman module, the focus of the module can be adjusted to address any specific depth indicated in an OCT image in a few milliseconds. We demonstrate the performance of the joint system in the depth dependent measurements of an ex vivo swine tissue and in vivo human skin. This system can be useful in measuring samples embedded with small targets, for example, to identify tumors in skin in vivo and assessment of tumor margins, in which OCT can be used to perform initial real-time screening with high throughput based on morphological features to identify suspicious targets then CRS is guided to address the targets in real time and fully characterize their biochemical fingerprints for confirmation.

The combination of Raman Spectroscopy and Mass Spectrometry to investigate cutaneous metallosis

Skin is uniquely accessible to investigation by modern scientific methods. Raman spectroscopy is a non-invasive technology for in-vivo analysis of molecular composition. Furthermore, a skin biopsy examined with Laser ablation - Inductively Coupled Plasma - Mass Spectrometry (LA-ICP-MS) provides high resolution multi-element mapping with high sensitivity and precision for exogenous metals in biological tissue which have no intrinsic abundance. This technique has been successfully applied to identify a variety of metals including gadolinium in cerebral vessel walls after contrast studies (1) . These two techniques were used to investigate metallosis from a shoulder joint replacement.

Label-free skin penetration analysis using time-resolved, phase-modulated stimulated Raman scattering microscopy

Skin penetration analysis of topically applied drugs or active compounds is essential in biomedical applications. Stimulated Raman scattering (SRS) microscopy is a promising label-free skin penetration analysis tool. However, conventional SRS microcopy suffers from limited signal contrast owing to strong background signals, which prevents its use in low-concentration drug imaging. Here, we present a skin penetration analysis method of topical agents using recently developed phase-modulated SRS (PM-SRS) microscopy. PM-SRS uses phase modulation and time-resolved signal detection to suppress both nonlinear background signals and Raman background signals from a tissue. A proof-of-concept experiment with a topically applied skin moisturizing agent (ectoine) in an in vitro skin tissue model revealed that PM-SRS with 1.7-ps probe delay yields a signal contrast 40 times higher than that of conventional amplitude-modulated SRS (AM-SRS). Skin penetration measurement of a topical therapeutic drug (loxoprofen sodium) showed that the mean drug concentration at the tissue surface layer after 240 min was 47.3 ± 4.8 mM. The proposed PM-SRS microscopy can be employed to monitor the spatial and temporal pharmacokinetics of small molecules in the millimolar concentration regime.

Critical parameters for accurate monitoring of caffeine penetration in porcine skin using confocal Raman spectroscopy

In this research, we addressed a challenge while measuring the penetration performance of caffeine (CAF) using confocal Raman spectroscopy (CRS). Normally in the process of CRS analysis, skin sample was moved from an incubation setup to a specified CRS-measuring sample holder. Accurate data collection may be questioned due to the variation of the environment the skin placed in. Therefore, two critical parameters including the CRS measuring temperature and proper skin hydration were focused; accordingly, four different conditions were designed. First, the skin was incubated in a real-time device with the skin placing onto PBS-filled chamber where the temperature was adjusted to 32℃. This device can be fixed under the CRS microscope, enabling simultaneous skin incubation and dynamic CRS measurements (condition i, reference). The other conditions referred to skins incubated in Franz diffusion cells for simulating the common experimental procedures. In order to control variables of CRS measuring condition, skins were transferred from cells to real-time device and open device. In real-time device, proper skin hydration was maintained and the skin temperature was adjusted to 32℃ (condition ii) and room temperature (condition iii). In open device, the skin was in a less hydrated state by moving onto a PBS-soaked filter paper and wrapped with aluminum foil at room temperature (condition iv). The skin penetration performances measured in these conditions were compared with reference. Caffeine solution and gel formulation were separately applied to the skin. The results showed in both cases that the decrease of skin temperature and hydration in condition iii and iv would apparently induce the decrease of detected caffeine signal, resulting in the inaccurate data collection. To this point, it indicates the reduction of solubilized caffeine in skin layer. We suggest the forming of caffeine crystallization at varied skin conditions to be the factor. Achieved video image, CRS spectrum collection and surface scan demonstrated the caffeine crystallization process on superficial skin layer. Polarized microscopic images exemplified the crystalline drug on tape stripped skin layers. It can be a potential support of caffeine crystallization inside skin. In short, we suggest the consideration of these parameters during CRS measurements for accurate monitoring of topical drug delivery. Meanwhile, the use of real-time device for dynamic skin incubation and data collection provides advantages in saving time and efforts in this study.

DESI-MS imaging to visualize spatial distribution of xenobiotics and endogenous lipids in the skin

The cutaneous biodistribution method (CBM) yields a high-resolution quantitative profile of drug deposition as a function of skin depth. However, it provides limited details about drug spatial distribution or penetration pathways. Mass spectrometry imaging (MSI) can complement the detailed quantitative data generated by CBM studies. The objectives of this work were to use desorption electrospray ionization (DESI)-MSI to (i) investigate the spatial cutaneous distributions of a topically applied drug and excipient and relate them to skin structures and (ii) image endogenous skin components and combine these results to gain insight into drug penetration routes. Porcine skin was used to compare two bioequivalent creams of econazole nitrate (ECZ) and a micelle formulation based on D-α-tocopheryl succinate polyethylene glycol 1000 (TPGS). DESI-MSI successfully imaged the cutaneous spatial distribution of ECZ and TPGS in 40 µm-thick horizontal sections and vertical cross-sections of the skin. Interestingly, clinically bioequivalent formulations did not appear to exhibit the same molecular distribution of ECZ in XY-horizontal sections. DESI-MSI also enabled visualization of TPGS (m/z 772.4706), mainly in the upper epidermis (≤80 µm). In conclusion, through co-localization of drugs and excipients with endogenous elements of the skin, DESI-MSI could further our understanding of the cutaneous penetration pathways of xenobiotics.

Biomolecular modifications during keratinocyte differentiation: Raman spectroscopy and chromatographic techniques

From the basal layer until the stratum corneum, lipid and protein biomarkers associated with morphological changes denote keratinocyte differentiation and characterize each epidermis layer. Herein, we followed keratinocyte differentiation in the early stages using HaCaT cells over a period of two weeks by two complementary analytical techniques: Raman microspectroscopy and high-performance liquid chromatography coupled with high resolution mass spectrometry. A high concentration of calcium in the medium induced HaCaT cell differentiation in vitro. The results from both techniques underlined the keratinocyte passage from the granular layer (day 9) to the stratum corneum layer (day 13). After 13 days of differentiation, we observed a strong increase in the lipid content, decrease in proteins, decrease in DNA, and a decrease in glucosylceramides/ceramides and sphingomyelins/ceramides ratios.

Assessment of Drug Delivery Kinetics to Epidermal Targets In Vivo

It has proven challenging to quantify ‘drug input’ from a formulation to the viable skin because the epidermal and dermal targets of topically applied drugs are difficult, if not impossible, to access in vivo. Defining the drug input function to the viable skin with a straightforward and practical experimental approach would enable a key component of dermal pharmacokinetics to be characterised. It has been hypothesised that measuring drug uptake into and clearance from the stratum corneum (SC) by tape-stripping allows estimation of a topical drug’s input function into the viable tissue. This study aimed to test this idea by determining the input of nicotine and lidocaine into the viable skin, following the application of commercialised transdermal patches to healthy human volunteers. The known input rates of these delivery systems were used to validate and assess the results from the tape-stripping protocol. The drug input rates from in vivo tape-stripping agreed well with the claimed delivery rates of the patches. The experimental approach was then used to determine the input of lidocaine from a marketed cream, a typical topical product for which the amount of drug absorbed has not been well-characterised. A significantly higher delivery of lidocaine from the cream than from the patch was found. The different input rates between drugs and formulations in vivo were confirmed qualitatively and quantitatively in vitro in conventional diffusion cells using dermatomed abdominal pig skin.

Raman microscopy for skin evaluation

Many dermatological studies have had limited success in revealing skin function because conventional histological methods are known to affect skin components. Recent progress in non-invasive optical imaging has enabled non-invasive visualization of the structure of each skin layer. However, it remains difficult to identify individual skin components. Alternatively, it is possible to obtain molecular vibrational signatures using spontaneous Raman scattering microscopy. Spontaneous Raman scattering microscopy requires long acquisition times and is rarely applied to skin imaging, especially because skin components, such as water and transepidermal agents, undergo relatively rapid changes. Consequently, non-linear Raman microscopies, such as coherent anti-Stokes Raman scattering and stimulated Raman scattering, have gradually been applied to acquire molecular imaging of skin tissue. In this review, the applications of Raman microscopies used to evaluate skin and research trends are presented. The applications of spontaneous Raman microscopy to in vivo human skin evaluation are first demonstrated with typical applications. Finally, the latest application of coherent Raman scattering microscopy to visualize 3D intracellular morphologies in the human epidermis during differentiation is described.

Therapy of infected wounds: overcoming clinical challenges by advanced drug delivery systems

In recent years, the incidence of infected wounds is steadily increasing, and so is the clinical as well as economic interest in effective therapies. These combine reduction of pathogen load in the wound with general wound management to facilitate the healing process. The success of current therapies is challenged by harsh conditions in the wound microenvironment, chronicity, and biofilm formation, thus impeding adequate concentrations of active antimicrobials at the site of infection. Inadequate dosing accuracy of systemically and topically applied antibiotics is prone to promote development of antibiotic resistance, while in the case of antiseptics, cytotoxicity is a major problem. Advanced drug delivery systems have the potential to enable the tailor-made application of antimicrobials to the side of action, resulting in an effective treatment with negligible side effects. This review provides a comprehensive overview of the current state of treatment options for the therapy of infected wounds. In this context, a special focus is set on delivery systems for antimicrobials ranging from semi-solid and liquid formulations over wound dressings to more advanced carriers such as nano-sized particulate systems, vesicular systems, electrospun fibers, and microneedles, which are discussed regarding their potential for effective therapy of wound infections. Further, established and novel models and analytical techniques for preclinical testing are introduced and a future perspective is provided.

Raman mapping coupled to self-modelling MCR-ALS analysis to estimate active cosmetic ingredient penetration profile in skin

Confocal Raman mapping (CRM) is a powerful, label free, non-destructive tool, enabling molecular characterization of human skin with applications in the dermo-cosmetic field. Coupling CRM to multivariate analysis can be used to monitor the penetration and permeation of active cosmetic ingredients (ACI) after topical application. It is presently illustrated how multivariate curve resolution alternating least squares (MCR-ALS) can be applied to detect and semi-quantitatively describe the diffusion profile of Delipidol, a commercially available slimming ACI, from Raman spectral maps. Although the analysis outcome can be critically dependent on the a priori selection of the number of regression components, it is demonstrated that profiling of the kinetics of diffusion into the skin can be established with or without additionnal spectral equality constraints in the multivariate analysis, with similar results. Ultimately, MCR-ALS, applied without spectral equality contraints, specifically identifies the ACI as one of main spectral components enabling to investigate its distribution and penetration into the stratum corneum and underlying epidermis layers.

Design of Chitosan Nanocapsules with Compritol 888 ATO® for Imiquimod Transdermal Administration. Evaluation of Their Skin Absorption by Raman Microscopy

PURPOSE

Design imiquimod-loaded chitosan nanocapsules for transdermal delivery and evaluate the depth of imiquimod transdermal absorption as well as the kinetics of this absorption using Raman Microscopy, an innovative strategy to evaluate transdermal absorption. This nanovehicle included Compritol 888ATO®, a novel excipient for formulating nanosystems whose administration through the skin has not been studied until now.

METHODS

Nanocapsules were made by solvent displacement method and their physicochemical properties was measured by DLS and laser-Doppler. For transdermal experiments, newborn pig skin was used. The Raman spectra were obtained using a laser excitation source at 532 nm and a 20/50X oil immersion objective.

RESULTS

The designed nanocapsules, presented nanometric size (180 nm), a polydispersity index <0.2 and a zeta potential +17. The controlled release effect of Compritol was observed, with the finding that half of the drug was released at 24 h in comparison with control (p < 0.05). It was verified through Raman microscopy that imiquimod transdermal penetration is dynamic, the nanocapsules take around 50 min to penetrate the stratum corneum and 24 h after transdermal administration, the drug was in the inner layers of the skin.

CONCLUSIONS

This study demonstrated the utility of Raman Microscopy to evaluate the drugs transdermal penetration of in the different layers of the skin. Graphical Abstract New imiquimod nanocapsules: evaluation of their skin absorption by Raman Microscopy and effect of the compritol 888ATO® in the imiquimod release profile.

Raman spectroscopy accurately classifies burn severity in an ex vivo model

Accurate classification of burn severities is of vital importance for proper burn treatments. A recent article reported that using the combination of Raman spectroscopy and optical coherence tomography (OCT) classifies different degrees of burns with an overall accuracy of 85% [1]. In this study, we demonstrate the feasibility of using Raman spectroscopy alone to classify burn severities on ex vivo porcine skin tissues. To create different levels of burns, four burn conditions were designed: (i) 200°F for 10s, (ii) 200°F for 30s, (iii) 450°F for 10s and (iv) 450°F for 30s. Raman spectra from 500-2000cm^-1 were collected from samples of the four burn conditions as well as the unburnt condition. Classifications were performed using kernel support vector machine (KSVM) with features extracted from the spectra by principal component analysis (PCA), and partial least-square (PLS). Both techniques yielded an average accuracy of approximately 92%, which was independently evaluated by leave-one-out cross-validation (LOOCV). By comparison, PCA+KSVM provides higher accuracy in classifying severe burns, while PLS performs better in classifying mild burns. Variable importance in the projection (VIP) scores from the PLS models reveal that proteins and lipids, amide III, and amino acids are important indicators in separating unburnt or mild burns (200°F), while amide I has a more pronounced impact in separating severe burns (450°F).

Skin Barriers in Dermal Drug Delivery: Which Barriers Have to Be Overcome and How Can We Measure Them?

Although, drugs are required in the various skin compartments such as viable epidermis, dermis, or hair follicles, to efficiently treat skin diseases, drug delivery into and across the skin is still challenging. An improved understanding of skin barrier physiology is mandatory to optimize drug penetration and permeation. The various barriers of the skin have to be known in detail, which means methods are needed to measure their functionality and outside-in or inside-out passage of molecules through the various barriers. In this review, we summarize our current knowledge about mechanical barriers, i.e., stratum corneum and tight junctions, in interfollicular epidermis, hair follicles and glands. Furthermore, we discuss the barrier properties of the basement membrane and dermal blood vessels. Barrier alterations found in skin of patients with atopic dermatitis are described. Finally, we critically compare the up-to-date applicability of several physical, biochemical and microscopic methods such as transepidermal water loss, impedance spectroscopy, Raman spectroscopy, immunohistochemical stainings, optical coherence microscopy and multiphoton microscopy to distinctly address the different barriers and to measure permeation through these barriers in vitro and in vivo.

Nanoscale investigation of human skin and study of skin penetration of Janus nanoparticles

Janus nanoparticles (JNP) are innovative nanocarriers with an interesting pharmaceutical and cosmetic potential. They are characterized by the presence of a lipid compartment associated with an aqueous compartment delimited by a phospholipid bilayer containing phospholipids and non-ionic surfactants. The hydrodynamic diameter of JNP varies between 150 and 300 nm. The purpose of this study was to answer the following questions: after cutaneous application, are JNP penetrating? If so, how deep? And in which state, intact or degraded? It was essential to understand these phenomena in order to control the rate and kinetics of diffusion of active ingredients, which can be encapsulated in this vehicle for pharmaceutical or cosmetic purposes. An innovative technique called AFM-IR, was used to elucidate the behavior of JNP after cutaneous application. This instrument, coupling atomic force microscopy and IR spectroscopy, allowing to perform chemical analysis at the nanometer scale thanks to local absorption measurements. The identification of organic molecules at the nanoscale is possible without any labelling. Before cutaneous application of JNP, the nano-structure of untreated human skin was investigated with AFM-IR. Then, in vitro human skin penetration of JNP was studied using Franz cells, and AFM-IR allowed us to perform ultra-local information investigations.

Handheld confocal Raman spectroscopy (CRS) for objective assessment of skin barrier function and stratification of severity in atopic dermatitis (AD) patients

BACKGROUND

We developed the first-of-its-kind handheld confocal Raman spectroscopy (CRS) system to quantify the concentration of natural moisturizing factors in the skin.

OBJECTIVE

To evaluate the feasibility of our handheld CRS system and propose a novel quantitative index to measure skin barrier function.

METHODS

This prospective study included 30 atopic dermatitis (AD) patients and 14 healthy volunteers. All AD participants were assessed using the Scoring Atopic Dermatitis (SCORAD) severity instrument, a vapometer for trans-epidermal water loss and a moisture meter for skin surface moisture. A handheld CRS operating at 785 nm laser was used to measure the biochemical constituents of the skin up to a depth of ∼100 μm. We trained a linear kernel-based support vector machine (SVM) model for eczema classification based on the water, ceramide and urocanic acid content. A novel Eczema Biochemical Index (EBI) was then formulated using the skin constituents measured from the AD participants to stage disease severity.

RESULTS

The SVM model used to classify healthy participants and AD patients obtained high cross-validated area under the curve of 0.857 and accuracy of 0.841, with high sensitivity and specificity values of 0.857 and 0.833 respectively. EBI can be used to stratify AD patients of varying severity, based on the biochemical constituents in the skin.

CONCLUSION

As compared to the standard CRS system, the handheld CRS offers higher portability and provides Raman measurements at various body regions with similar sensitivity. This suggests that a handheld CRS device could be a valuable point-of-care resource in both research and clinical use.

Raman mapping of fentanyl transdermal delivery systems with off-label modifications

Raman mapping is a powerful and emerging tool in characterization of pharmaceuticals and provides non-destructive chemical and structural identification with minimal sample preparation. One pharmaceutical form that is suitable but has not been studied in-depth with Raman mapping is transdermal delivery systems (TDS). TDS are dosage forms designed to deliver a therapeutically effective amount of active pharmaceutical ingredient (API) across a patient's skin. To enhance drug delivery through the skin, the API in the formulation is often close to a saturated or supersaturated state. Thus, improper use or off-label modifications can lead to occurrence of unwanted API changes, specifically, crystallization over time. Here, off-label modifications were mimicked on a set of fentanyl drug-in-adhesive TDS sold on the U.S. market by four different manufacturers via die cutting, and then the die cut TDS were investigated through confocal Raman mapping for structural and chemical changes. Using Multivariate Curve Resolution (MCR), not only was morphological and chemical characterization of transdermal systems provided, but also fentanyl crystals in certain products due to off-label modifications were identified. The chemometric model used in analysis of Raman maps allowed precise identification of fentanyl as the crystalline material as confirmed by the hit-quality-index correlation of component spectra from the chemometric model with library spectra of a fentanyl reference standard. The results show that confocal Raman mapping with MCR can be utilized in assessing pharmaceutical quality of TDS. This method has the potential to be widely used in characterization of such systems as an alternative to existing techniques.

Burn-related Collagen Conformational Changes in ex vivo Porcine Skin using Raman Spectroscopy

This study utilizes Raman spectroscopy to analyze the burn-induced collagen conformational changes in ex vivo porcine skin tissue. Raman spectra of wavenumbers 500-2000 cm^-1 were measured for unburnt skin as well as four different burn conditions: (i) 200 °F for 10 s, (ii) 200 °F for the 30 s, (iii) 450 °F for 10 s and (iv) 450 °F for 30 s. The overall spectra reveal that protein and amino acids-related bands have manifested structural changes including the destruction of protein-related functional groups, and transformation from α-helical to disordered structures which are correlated with increasing burn severity. The deconvolution of the amide I region (1580-1720 cm^-1) and the analysis of the sub-bands reveal a change of the secondary structure of the collagen from the α-like helix dominated to the β-aggregate dominated one. Such conformational changes may explain the softening of mechanical response in burnt tissues reported in the literature.

Ex vivo detection of cadmium-induced renal damage by using confocal Raman spectroscopy

Cadmium (Cd) is a toxic heavy metal which is harmful to environment and organisms. The reabsorption of Cd in kidney leads it to be the main damaged organ in animals under the Cd exposure. In this work, we applied confocal Raman spectroscopy to map the pathological changes in situ in normal and Cd-exposed mice kidney. The renal tissue from Cd-exposed group displayed a remarkable decreasing in the intensity of typical peaks related to mitochondria, DNA, proteins and lipids. On the contrary, the peaks of collagen in Cd-exposed group elevated significantly. The components in each tissue were identified and distinguished by principal component analysis. Furthermore, all the biological investigations in this study were consistent with the Raman spectrum detection, which revealed the progression and degree of lesion induced by Cd. The confocal Raman spectroscopy provides a new perspective for in situ monitoring of substances changes in tissues, which exhibits more comprehensive understanding of the pathogenic mechanisms of heavy metals in molecular toxicology.

Toward Milder Personal Care Cleansing Products: Fast ex vivo Screening of Irritating Effects of Surfactants on Skin Using Raman Microscopy

We report a novel Raman technique that allows fast and reliable ex vivo assessment of the irritability of personal care cleansing products to the skin in terms of the molecular-level effects such as retention of water by corneocytes, change in the packing order and content of intercellular lipids, and the structure of keratin. We test this technique for the single surfactants (dodecyl glucoside, sodium dodecyl sulfate, sodium cocoyl glycinate, lauramidopropyl betaine) that are typically used in personal care, as well as on three types of commercial soap bars (“superfat”, “syndet”, and “combar”). We find that soaking of the skin for prolonged time in pure water can cause unfolding of keratin, which is commonly considered as a signature of “harshness” when dealing with the surfactant formulations. Moreover, molecular-level signatures of irritability of the test surfactants and soaps at brief (10 min) exposure times do not follow the trend expected from their critical micelle concentrations (CMC) and collagen swelling. In particular, dodecyl glucoside has positive impact on the barrier properties of the stratum corneum (SC) and apparent detergency properties (solubilizes lipids without affecting their packing order). We also find that two qualitatively different soap bars (“superfat” and “syndet”) are similarly mild under the conditions studied, while the “combar” soap has detergency properties. These results demonstrate that to improve methodology of predicting irritability of a surfactant-based formulation, we need to study more systematically the molecular-level responses of the SC to exposure.

Methods to Evaluate Skin Penetration In Vitro

Dermal and transdermal drug therapy is increasing in importance nowadays in drug development. To completely utilize the potential of this administration route, it is necessary to optimize the drug release and skin penetration measurements. This review covers the most well-known and up-to-date methods for evaluating the cutaneous penetration of drugs in vitro as a supporting tool for pharmaceutical research scientists in the early stage of drug development. The aim of this article is to present various experimental models used in dermal/transdermal research and summarize the novel knowledge about the main in vitro methods available to study skin penetration. These techniques are: Diffusion cell, skin-PAMPA, tape stripping, two-photon microscopy, confocal laser scanning microscopy, and confocal Raman microscopic method.

Mechanism investigation of ethosomes transdermal permeation

Ethosomes are widely used to promote transdermal permeation of both lipophilic and hydrophilic drugs, but the mechanism of interaction between the ethosomes and the skin remains unclear. In this work, it was exploded with several technologies and facilities. Firstly, physical techniques such as attenuated total reflectance fourier-transform infrared and laser confocal Raman were used and the results indicated that the phospholipids configuration of stratum corneum changes from steady state to unstable state with the treatment of ethosomes. Differential scanning calorimetry reflected the thermodynamics change in stratum corneum after treatment with ethosomes. The results revealed that the skin of Bama mini-pigs, which is similar to human skin, treated by ethosomes had a relatively low T_m and enthalpy. Scanning electron microscopy and transmission electron microscopy showed that the microstructure and ultrastructure of stratum corneum was not damaged by ethosomes treatment. Furthermore, confocal laser scanning microscopy revealed that lipid labeled ethosomes could penetrate the skin via stratum corneum mainly through intercellular route, while during the process of penetration, phospholipids were retained in the upper epidermis. Cell experiments confirmed that ethosomes were distributed mainly on the cell membrane. Further study showed that only the drug-loaded ethosomes increased the amount of permeated drug. The current study, for the first time, elucidated the mechanistic behavior of ethosomes in transdermal application from molecular configuration, thermodynamic properties, ultrastructure, fluorescent labeling and cellular study. It is anticipated that the approaches and results described in the present study will benefit for better design of drug-loaded ethosomes.

Noninvasive analysis and minimally invasive in vivo experimental challenges of the skin barrier

In this review, we aim to give a concise and selective overview of noninvasive biophysical analysis techniques for skin barrier analysis (transepidermal water loss, electrical methods, confocal Raman microspectroscopy, sebumeter, reflectance spectrophotometry, tristimulus colorimetry, diffuse reflectance spectroscopy and reflectance confocal microscopy), including advantages and limitations. Rather than giving an exhaustive description of the many techniques currently available, we show the usefulness of a representative selection of techniques in the functional and morphological evaluation of the skin barrier. Furthermore, we introduce human minimally invasive skin challenging models as a means to study the mechanisms regulating skin homoeostasis and disease and subsequently show how biophysical analysis techniques can be combined with these in vivo skin challenging models in the functional and morphological evaluation of the skin barrier in healthy human skin. We are convinced that the widespread application of biophysical analysis techniques in dermatological practice and in cosmetic sciences will prove invaluable in offering personalized and noninvasive skin treatment solutions. Furthermore, combining the human in vivo challenging models with these novel noninvasive techniques will provide valuable methodology and tools for detailed characterization of the skin barrier in health and disease.

A new device concept for bacterial sensing by Raman spectroscopy and voltage-gated monolayer graphene

Electron-phonon coupling in monolayer graphene results in a modification of its Raman spectra upon charge transfer processes induced by interaction with its chemical environment or the presence of strain or defects in its structure. Modification of Raman spectra is examined in order to develop ultra-sensitive biosensing techniques for the detection, identification, differentiation and classification of bacteria associated with infectious diseases. Specifically, the electrochemical properties of top gated monolayer graphene on SiO2/Si substrates, in the absence and presence of interaction with Gram-positive bacteria (Enterococcus faecalis, Bacillus subtilis) and Gram-negative bacteria (Escherichia coli and Salmonella typhimurium), are probed by Raman spectroscopy in an applied voltage range from 0 V to 3 V. Bacteria and monolayer graphene interactions are thus electrostatically tuned. The resulting correlation of specific bacterial chemical properties and Raman spectral characteristics is reported, along with density functional theory simulations of the charge transfer mechanism. The intensities of the G and D Raman vibrational modes are modulated as a function of the applied voltage in the presence of bacteria, but remain unchanged in bare monolayer graphene. A fingerprint region is also identified in the range of 200 cm-1 to 600 cm-1, with disulfide bonds observed at 490 cm-1, associated with bacterial membrane proteins. Significantly, such observations are detected even in the absence of bacterial culturing, a time-consuming step.

Physical and compositional analysis of differently cultured 3D human skin equivalents by confocal Raman spectroscopy

Three-dimensional skin equivalents are increasingly gaining acceptance as non-animal based experimental models of human skin. They are particularly suited to studying differences in physical and compositional properties of normal and diseased skin and their impact on the skin's barrier function. Typically, a culture protocol yielding a model of normal skin is modified to create a model simulating a pathology. Skin layer thicknesses and lipid/protein contents are compared using methods that are invasive, precluding further experiments on the same replicates, and which may be prone to artefacts. We show here that confocal Raman spectroscopy (CRS) is a valuable method for non-invasive discrimination of skin equivalents grown under different culture conditions. Using 3D full-thickness skin equivalents developed in-house, we measure significant differences in stratum corneum and viable epidermis apparent thicknesses resulting from a 7-day difference in the cultures' air-lift phase and from supplementation of the culture medium with interleukin 4. Furthermore, stratum corneum thicknesses obtained by CRS are up to 2.6-fold higher than values measured from histological photomicrographs. Regarding composition, CRS reveals the differential effects of the culture protocol modifications on ceramide, cholesterol and protein composition as a function of depth in the stratum corneum.

Raman Spectroscopy for Process Analytical Technologies of Pharmaceutical Secondary Manufacturing

As the process analytical technology (PAT) mindset is progressively introduced and adopted by the pharmaceutical companies, there is an increasing demand for effective and versatile real-time analyzers to address the quality assurance challenges of drug manufacturing. In the last decades, Raman spectroscopy has emerged as one of the most promising tools for non-destructive and fast characterization of the pharmaceutical processes. This review summarizes the achieved results of the real-time application of Raman spectroscopy in the field of the secondary manufacturing of pharmaceutical solid dosage forms, covering the most common secondary process steps of a tablet production line. In addition, the feasibility of Raman spectroscopy for real-time control is critically reviewed, and challenges and possible approaches to moving from real-time monitoring to process analytically controlled technologies (PACT) are discussed.