Pharmaceutical cocrystals, salts and multicomponent systems; intermolecular interactions and property based design

Enantiospecific crystallisation behaviour of malic acid in mechanochemical reactions with vinpocetine

We report an intriguing example of enantioselectivity in the formation of new multicomponent crystalline solid containing vinpocetine and malic acid. Several experimental data sets confirmed that the multicomponent system presents a clear enantiospecific crystallisation behaviour both in the solid-state and in solution: only the system consisting of vinpocetine and L-malic acid produces a free-flowing solid consisting of a new crystalline form, while the experiments with D-malic acid produced an amorphous and often deliquescent material. The new vinpocetine-L-malic system crystallizes in the monoclinic space group of P21 and in a 1:1 molar ratio, where the two molecules are linked through intermolecular hydrogen bonds in the asymmetric unit. The vinpocetine-DL-malic system was partially crystalline (with also traces of unreacted vinpocetine) with diffraction peaks corresponding to those of vinpocetine-L-malic acid. Solid-state NMR experiments revealed strong ionic interactions in all the three systems. However, while vinpocetine-L-malic acid system was a pure and crystalline phase, the other two systems persistently showed the presence of unreacted vinpocetine. This resulted in a significant worsening of the dissolution profile with respect to the pure vinpocetine-L-malic crystalline salt, whose dissolution kinetics appeared superior.

Highly Soluble Dacarbazine Multicomponent Crystals Less Prone to Photodegradation

Dacarbazine (DTIC) is a widely prescribed oncolytic agent to treat advanced malignant melanomas. Nevertheless, the drug is known for exhibiting low and pH-dependent solubility, in addition to being photosensitive. These features imply the formation of the inactive photodegradation product 2-azahypoxanthine (2-AZA) during pharmaceutical manufacturing and even drug administration. We have focused on developing novel DTIC salt/cocrystal forms with enhanced solubility and dissolution behaviors to overcome or minimize this undesirable biopharmaceutical profile. By cocrystallization techniques, two salts, two cocrystals, and one salt-cocrystal have been successfully prepared through reactions with aliphatic carboxylic acids. A detailed structural study of these new multicomponent crystals was conducted using X-ray diffraction (SCXRD, PXRD), spectroscopic (FT-IR and 1H NMR), and thermal (TG and DSC) analyses. Most DTIC crystal forms reported display substantial enhancements in solubility (up to 19-fold), with faster intrinsic dissolution rates (from 1.3 to 22-fold), contributing positively to reducing the photodegradation of DTIC in solution. These findings reinforce the potential of these new solid forms to enhance the limited DTIC biopharmaceutical profile.

Piperine-hydroxybenzoate as phytochemistry antiosteoarthritis combination: Structural, solubility, and in vivo antiinflammatory study

This study discusses the composition and structure determination of a new multicomponent system from antiinflammatory natural ingredients, consisting of piperine (Pip) and 4-hydroxybenzoic acid (HBA), named Pip-HBA. In addition, this research studied its solubility and anti-inflammatory activity. After screening the stoichiometric proportions, this multicomponent system formation reaction was carried out using the solvent-dropped grinding and evaporation methods. Characterizations using solid analysis including differential scanning calorimetry (DSC), powder X-ray diffractometry (PXRD), and Fourier transform infrared spectroscopy (FTIR), confirmed the formation of Pip-HBA. These multicomponent systems showed different thermograms and diffractograms. Furthermore, the FTIR spectrum of Pip-HBA multicomponent system differs from the physical mixture and its constituent components. Single crystal diffractometry (SCXRD) determined Pip-HBA to be a new multicomponent system structure in three dimensions. Pip-HBA showed increased solubility and anti-inflammatory activity compared to single piperine. Therefore, Pip-HBA multicomponent system has quite potential for further preparation development.

Wavelength Division Multiplexing-Based High-Sensitivity Surface Plasmon Resonance Imaging Biosensor for High-Throughput Real-Time Molecular Interaction Analysis

In this study, we report the successful development of a novel high-sensitivity intensity-based Surface Plasmon Resonance imaging (SPRi) biosensor and its application for detecting molecular interactions. By optimizing the excitation wavelength and employing a wavelength division multiplexing (WDM) algorithm, the system can determine the optimal excitation wavelength based on the initial refractive index of the sample without adjusting the incidence angle. The experimental results demonstrate that the refractive index resolution of the system reaches 1.77×10-6 RIU. Moreover, it can obtain the optimal excitation wavelength for samples with an initial refractive index in the range of 1.333 to 1.370 RIU and accurately monitor variations within the range of 0.0037 RIU without adjusting the incidence angle. Additionally, our new SPRi technique realized real-time detection of high-throughput biomolecular binding processes, enabling analysis of kinetic parameters. This research is expected to advance the development of more accurate SPRi technologies for molecular interaction analysis.

Sensitizing Explosives Through Molecular Doping

Cocrystallization assembles multicomponent crystals in defined ratios that are held together by intermolecular interactions. While cocrystals have seen extensive use in the pharmaceutical industry for solving issues with stability and solubility, extension to the field of energetic materials for improved properties has proven difficult. Predicting successful coformers remains a challenge for systems lacking well-understood synthons that promote reliable intermolecular assembly. Herein, an alternative method is investigated for altering energetic properties that operates in the absence of well-defined interactions by molecular doping. An impact sensitive primary explosive, cyanuric triazide (CTA), was selected as the dopant to test if less impact sensitive secondary explosives could gain increased sensitization to impact when CTA is inserted into their crystal lattices. Molecular doping was successful in sensitizing three melt-castable energetics: 2,4,6-trinitrotoluene (TNT), 2,4-dinitroanisole (DNAN), and 1,3,3-trinitroazetidine (TNAZ). CTA could also be incorporated as a stabilized inclusion to sensitize DNAN further. These results demonstrate how the judicious choice of dopant can lead to specific property improvements, providing a method for creating energetic materials with new properties to access metal-free primary explosives and physical hot spot models for explosive ignition.

Co-Processed Crystalline Solids of Ivermectin with Span® 60 as Solubility Enhancers of Ivermectin in Natural Oils

Despite being discovered over five decades ago, little is still known about ivermectin. Ivermectin has several physico-chemical properties that can result in it having poor bioavailability. In this study, polymorphic and co-crystal screening was used to see if such solid-state modifications can improve the oil solubility of ivermectin. Span® 60, a lipophilic non-ionic surfactant, was chosen as co-former. The rationale behind attempting to improve oil solubility was to use ivermectin in future topical and transdermal preparations to treat a range of skin conditions like scabies and head lice. Physical mixtures were also prepared in the same molar ratios as the co-crystal candidates, to serve as controls. Solid-state characterization was performed using X-ray powder diffraction (XRPD), Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The FTIR spectra of the co-crystal candidates showed the presence of Span® 60's alkyl chain peaks, which were absent in the spectra of the physical mixtures. Due to the absence of single-crystal X-ray data, co-crystal formation could not be confirmed, and therefore these co-crystal candidates were referred to as co-processed crystalline solids. Following characterization, the solid-state forms, physical mixtures and ivermectin raw material were dissolved in natural penetration enhancers, i.e., avocado oil (AVO) and evening primrose oil (EPO). The co-processed solids showed increased oil solubility by up to 169% compared to ivermectin raw material. The results suggest that co-processing of ivermectin with Span® 60 can be used to increase its oil solubility and can be useful in the development of oil-based drug formulations.

Drug-drug co-amorphous systems: An emerging formulation strategy for poorly water-soluble drugs

Overcoming the poor water solubility of small-molecule drugs is a major challenge in the development of clinical pharmaceuticals. Amorphization of crystalline drugs is a highly effective strategy to improve their aqueous solubility. However, amorphous drugs are thermodynamically unstable and likely to crystallize during manufacturing and storage. Recently, drug-drug co-amorphous systems have emerged as a novel strategy to not only enable enhanced dissolution and physical stability of the individual drugs within the system but also to provide a strategy for combination therapy of the same or different clinical indications. This review serves to highlight advances in the methods used to manufacture and characterize drug-drug co-amorphous systems, summarize drug-drug co-amorphous applications reported in recent decades, and provide an outlook on future possibilities and perspectives.

Crystallization from solution versus mechanochemistry to obtain double-drug multicomponent crystals of ethacridine with salicylic/acetylsalicylic acids

Salicylic and acetylsalicylic acids and ethacridine have complementary bioactive properties. They can be combined to obtain double-drug multicomponent crystals. Their reactivity in different environments was explored to obtain the possible compounds, stable at different hydration degrees. Solution, liquid-assisted grinding, and dry preparation approaches were applied to the couples of reactants in different stoichiometric ratios. Four compounds were obtained, and three out of them were stable and reproducible enough to determine their structures using SCXRD or PXRD methods. When coupled to ethacridine, salicylic acid gave two stable structures (1 and 3, both showing 1:1 ratio but different hydration degree) and a metastable one (5), while acetylsalicylic acid only one structure from solution (2 in 1:1 ratio), while LAG caused hydrolysis and formation of the same compound obtained by LAG of ethacridine with salicylic acid. While solution precipitation gave dihydrated (1) or monohydrated (2) structures with low yields, LAG of salicylic acid and ethacridine allowed obtaining an anhydrous salt complex (3) with a yield close to 1. The structures obtained by solution crystallizations maximize π(acridine)-π(acridine) contacts with a less compact packing, while the LAG structure is more compact with a packing driven by hydrogen bonds. For all compounds, NMR, ATR-FTIR, and Hirshfeld surface analysis and energy framework calculations were performed.

Improvement of the Thermal Stability and Aqueous Solubility of Three Matrine Salts Assembled by the Similar Structure Salt Formers

Matrine (MAT), a natural Chinese herbal medicine, has a unique advantage in the treatment of various chronic diseases. However, its low melting point, low bioavailability, and high dosage restrict its subsequent development into new drugs. In this study, three kinds of MAT salts, namely, MAT-2,5-dihydroxybenzoic acid (MAT-25DHB), MAT-2,6-dihydroxybenzoic acid (MAT-26DHB), and MAT-salicylic acid-hydrate (MAT-SAL-H2O), were designed and synthesized to improve the drugability of MAT. The three salts were characterized by using various analytical techniques, including single-crystal X-ray diffractometry, powder X-ray diffractometry, differential scanning calorimetry, thermogravimetry, and infrared spectroscopy. The results of the thermal stability evaluation showed that the formation of salts improved the stability of MAT; MAT-25DHB is the most stable salt reported at present. The results of aqueous solubility showed that the solubility of MAT-25DHB was higher than that of MAT, while that of MAT-26DHB and MAT-SAL-H2O were less. Given that the MAT-25DHB salt further improved the solubility of MAT, it is expected to be subjected to further research as an optimized salt. Lattice energy and solvation free energy are important factors affecting the solubility of salts; the reasons for the changes of solubility and stability of three kinds of salts are explained by calculating them.

Mebendazolium mesylate anhydride salt: rational design based on supramolecular assembly, synthesis, and solid-state characterization

The design mebendazole (MBZ) multicomponent systems is important to obtain new materials that incorporate the API (active pharmaceutical ingredient) with better thermal stability, avoiding the interconversion of desmotropes. Interestingly, the presence of water molecules in the mebendazolium mesylate monohydrate prevents the formation of the R22(8) supramolecular synthon, found in all mebendazolium salts with polyatomic counterions. Here, we designed a new mebendazolium mesylate anhydrous salt based on statistical scrutiny of all mebendazole crystal structures identified in the literature and an exhaustive analysis of the conformational and geometrical requirements for the supramolecular assembly. The synthesis of this new salt and its solid-state characterization through single-crystal X-ray diffraction and complementary techniques are presented. As expected, mebendazole recrystallization in methanol with methanesulfonic acid - a Food and Drug Administration accepted coformer - in the absence of water yields a mesylate anhydrous salt with 1 : 1 stoichiometry. This new salt crystallizes in the P212121 (19) space group. The main intermolecular interactions found in the crystal structure are the hydrogen bonds that form a R22(8) supramolecular motif that assembles the ionic pairs. Additional non-classical H-bond, as well as π⋯π and carbonyl⋯cation interactions, contribute to the final stabilization of the crystal packing. This new salt is stable up to 205 °C when it undergoes the endothermic loss of the ester moiety to yield 2-amino-5-benzoylbenzimidazole. Moreover, preliminary dissolution experiments in aqueous 0.1 mol L-1 HCl suggest an apparent solubility of mebendazolium mesylate anhydride 2.67 times higher than that of the preferred for pharmaceutical formulations MBZ form C.

Accelerated Wound Healing with a Diminutive Scar through Cocrystal Engineered Curcumin

Pharmaceutical cocrystals ( Regulatory Classification of Pharmaceutical Co-Crystals Guidance for Industry; Food and Drug Administration, 2018) are crystalline solids produced through supramolecular chemistry to modulate the physicochemical properties of active pharmaceutical ingredients (APIs). Despite their extensive development in interdisciplinary sciences, this is a pioneering study on the efficacy of pharmaceutical cocrystals in wound healing and scar reducing. Curcumin-pyrogallol cocrystal (CUR-PYR) was accordingly cherry-picked since its superior physicochemical properties adequately compensate for limitative drawbacks of curcumin (CUR). CUR-PYR has been synthesized by a liquid-assisted grinding (LAG) method and characterized via FT-IR, DSC, and PXRD analyses. In vitro antibacterial study indicated that CUR-PYR cocrystal, CUR+PYR physical mixture (PM), and PYR are more effective against both Gram-negative (Pseudomonas aeruginosa and Escherichia coli) and Gram-positive (Staphylococcus aureus and Bacillus subtilis) bacteria in comparison with CUR. In vitro results also demonstrated that the viability of HDF and NIH-3T3 cells treated with CUR-PYR were improved more than those received CUR which is attributed to the effect of PYR in the form of cocrystal. The wound healing process has been monitored through a 15 day in vivo experiment on 75 male rats stratified into six groups: five groups treated by CUR-PYR+Vaseline (CUR-PYR.ung), CUR+PYR+Vaseline (CUR+PYR.ung), CUR+Vaseline (CUR.ung), PYR+Vaseline (PYR.ung), and Vaseline (VAS) ointments and a negative control group of 0.9% sodium chloride solution (NS). It was revealed that the wounds under CUR-PYR.ung treatment closed by day 12 postsurgery, while the wounds in other groups failed to reach the complete closure end point until the end of the experiment. Surprisingly, a diminutive scar (3.89 ± 0.97% of initial wound size) was observed in the CUR-PYR.ung treated wounds by day 15 after injury, followed by corresponding values for PYR.ung (12.08 ± 2.75%), CUR+PYR.ung (13.89 ± 5.02%), CUR.ung (16.24 ± 6.39%), VAS (18.97 ± 6.89%), and NS (20.33 ± 5.77%). Besides, investigating histopathological parameters including inflammation, granulation tissue, re-epithelialization, and collagen deposition signified outstandingly higher ability of CUR-PYR cocrystal in wound healing than either of its two constituents separately or their simple PM. It was concluded that desired solubility of the prepared cocrystal was essentially responsible for accelerating wound closure and promoting tissue regeneration which yielded minimal scarring. This prototype research suggests a promising application of pharmaceutical cocrystals for the purpose of wound healing.

Mechanosynthesis of Stable Salt Hydrates of Allopurinol with Enhanced Dissolution, Diffusion, and Pharmacokinetics

Allopurinol (ALO) is a medication that treats gout and kidney stones by lowering uric acid synthesis in the blood. The biopharmaceutics classification system (BCS) IV drug exhibits poor aqueous solubility, permeability, and bioavailability. To overcome the bottlenecks of ALO, salts with maleic acid (MLE) and oxalic acid (OXA) were synthesized using the solvent-assisted grinding method. The novel multicomponent solids were characterized by PXRD, DSC, TGA, FT-IR, and SEM images. The crystal structures of these salts with variable stoichiometry were obtained using Rietveld refinement from the high-resolution PXRD data. The proton from the dicarboxylic acid is transferred to the most basic pyrimidine "N" of ALO. The N-H···N hydrogen-bonded ALO homodimer is replaced by the N+-H···O- ionic interactions in ALO-OXA (2:1:0.4) and ALO-MLE (1:1:1) salt hydrates. The organic salts improved solubility and dissolution up to 5-fold and the diffusion permeability up to 12 times compared to the native drug in a luminal pH 6.8 phosphate buffer medium. The salt hydrates were exceptionally stable during storage at 30 ± 5 °C and 75 ± 5% relative humidity. Superior dissolution and diffusion permeability of the ALO-MLE salt resulted in improved pharmacokinetics (peak plasma concentration) that offers a promising solid dosage form with enhanced bioavailability and lower dosage formulation.

Formation of Hemihydrate Crystal form Overcomes Milling Issue Induced by Exposed Functional Groups on Cleavage Plane for a Y5 Receptor Antagonist of Neuropeptide Y

This study aimed to investigate the crystal forms of an originally designed Y5 receptor antagonist of neuropeptide Y. Polymorphic screening was performed via solvent evaporation and slurry conversion using various solvents. The obtained crystal forms α, β, and γ were characterized by X-ray powder diffraction analysis. Thermal analysis determined that forms α, β, and γ were hemihydrate, metastable and stable forms, respectively; the hemihydrate and the stable forms were candidates. To arrange the particle size, forms α and γ were subjected to jet milling. However, form γ could not be milled because of powder stiction to the apparatus, whereas form α could be. To investigate this mechanism, single-crystal X-ray diffraction analysis was performed. The crystal structure of form γ was characterized by two-dimensional hydrogen bonding between neighboring molecules. This revealed that the functional groups forming hydrogen bonds were exposed on the cleavage plane of form γ. The three-dimensional hydrogen-bonding network with water stabilized the hemihydrate form, α. These results indicate that the hydrogen bondable groups exposed on the cleavage plane of form γ should result in stiction of the powder and adherence to the apparatus. It was concluded that crystal conversion is a method to overcome the milling issue.

Cocrystals Enhance Biopharmaceutical and Antimicrobial Properties of Norfloxacin

A solvate cocrystal of the antimicrobial norfloxacin (NFX) was formed by using isonicotinamide (INA) as a coformer with the solvent evaporation technique. The cocrystal formation was confirmed by performing solid-state characterization techniques. We evaluated the dissolution under supersaturated conditions and also the solubility at the vertex of triphasic domain of cocrystal and NFX in both water and Fasted-State Simulated Intestinal Fluid (FaSSIF). The antimicrobial activity was evaluated using the microdilution technique. The cocrystal showed 1.8 times higher dissolution than NFX in water at 60 min and 1.3 times higher in FaSSIF at 180 min in the kinetic study. The cocrystal also had an increase in solubility of 8.38 times in water and 6.41 times in FaSSIF. The biopharmaceutical properties of NFX with cocrystallization improved antimicrobial action, as shown in the results of minimum inhibitory concentration (MIC) and inhibitory concentrations of 50% (IC50%) and 90% (IC90%). This paper presents, for the first time, a more in-depth analysis of the cocrystal of NFX-INA concerning its dissolution, solubility, and antimicrobial activity. In all these criteria, the cocrystal obtained better results compared to the pure drug.

Coamorphous Systems of Valsartan: Thermal Analysis Contribution to Evaluate Intermolecular Interactions Effects on the Structural Relaxation

Coamorphous formation in binary systems of valsartan (Val) with 4,4'-bipyridine (Bipy) and trimethoprim (Tri) was investigated for mixtures with a mole fraction of 0.16~0.86 of valsartan and evaluated in terms of the glass transition temperature. The glass transition of the systems had a behavior outside the values predicted by the Gordon-Taylor equation, showing that Val-Bipy (hydrogen bonding between the components) had a lower deviation and Val-Tri (ionic bonding between the components) had a higher deviation. Mixtures of compositions 2:1 Val-Bipy and 1:1 Val-Tri were selected for further investigation and verified to be stable, as no crystallization was observed during subsequent heating and cooling programs. For these systems, the effective activation energy during glass transition was evaluated. Compared to pure valsartan, the system with the lower glass transition temperature (Val-Bipy) presented the highest effective activation energy, and the system with the higher glass transition temperature (Val-Tri) presented a lower effective activation energy. The results presented a good correlation between the data obtained from two different techniques to determine the fragility and effective activation energy: non-isothermal kinetic analysis by DSC and TSDC.

Halogen Bonding in Sulphonamide Co-Crystals: X···π Preferred over X···O/N?

Sulphonamides have been one of the major pharmaceutical compound classes since their introduction in the 1930s. Co-crystallisation of sulphonamides with halogen bonding (XB) might lead to a new class of pharmaceutical-relevant co-crystals. We present the synthesis and structural analysis of seven new co-crystals of simple sulphonamides N-methylbenzenesulphonamide (NMBSA), N-phenylmethanesulphonamide (NPMSA), and N-phenylbenzenesulphonamide (BSA), as well as of an anti-diabetic agent Chlorpropamide (CPA), with the model XB-donors 1,4-diiodotetrafluorobenzene (14DITFB), 1,4-dibromotetrafluorobenzene (14DBTFB), and 1,2-diiodotetrafluorobenzene (12DITFB). In the reported co-crystals, X···O/N bonds do not represent the most common intermolecular interaction. Against our rational design expectations and the results of our statistical CSD analysis, the normally less often present X···π interaction dominates the crystal packing. Furthermore, the general interaction pattern in model sulphonamides and the CPA multicomponent crystals differ, mainly due to strong hydrogen bonds blocking possible interaction sites.

Overcoming the Hydrophobic Nature of Zinc Phenylacetate Through Co-Crystallization with Isonicotinamide

Zinc phenylacetate (Zn-PA), a substitute for sodium phenylacetate as an ammonia-scavenging drug is hydrophobic, which poses problems for drug dissolution and solubility. We were able to co-crystallize the zinc phenylacetate with isonicotinamide (INAM) and produce a novel crystalline compound (Zn-PA-INAM). The single crystal of this new crystal was obtained, and its structure is reported here for the first time. Zn-PA-INAM was characterized computationally by ab initio, Hirshfeld calculations, CLP-PIXEL lattice energy calculation, and BFDH morphology analysis, and experimentally by PXRD, Sc-XRD, FTIR, DSC, and TGA analyses. Structural and vibrational analyses showed a major modification in intermolecular interaction of Zn-PA-INAM compared to Zn-PA. The dispersion-based pi-stacking in Zn-PA is replaced by coulomb-polarization effect of hydrogen bonds. As a result, Zn-PA-INAM is hydrophilic, improving the wettability and powder dissolution of the target compound in an aqueous solution. Morphology analysis revealed, unlike Zn-PA, Zn-PA-INAM has polar groups exposed on its prominent crystalline faces, reducing the hydrophobicity of the crystal. The shift in average water droplet contact angle from 128.1° (Zn-PA) to 27.1° (Zn-PA-INAM) is strong evidence of a marked decrease in hydrophobicity of the target compound. Finally, HPLC was used to obtain the dissolution profile and solubility of Zn-PA-INAM compared to Zn-PA.

Polymorphism of Carbamazepine Pharmaceutical Cocrystal: Structural Analysis and Solubility Performance

Polymorphism is a common phenomenon among single- and multicomponent molecular crystals that has a significant impact on the contemporary drug development process. A new polymorphic form of the drug carbamazepine (CBZ) cocrystal with methylparaben (MePRB) in a 1:1 molar ratio as well as the drug's channel-like cocrystal containing highly disordered coformer molecules have been obtained and characterized in this work using various analytical methods, including thermal analysis, Raman spectroscopy, and single-crystal and high-resolution synchrotron powder X-ray diffraction. Structural analysis of the solid forms revealed a close resemblance between novel form II and previously reported form I of the [CBZ + MePRB] (1:1) cocrystal in terms of hydrogen bond networks and overall packing arrangements. The channel-like cocrystal was found to belong to a distinct family of isostructural CBZ cocrystals with coformers of similar size and shape. Form I and form II of the 1:1 cocrystal appeared to be related by a monotropic relationship, with form II being proven to be the thermodynamically more stable phase. The dissolution performance of both polymorphs in aqueous media was significantly enhanced when compared with parent CBZ. However, considering the superior thermodynamic stability and consistent dissolution profile, the discovered form II of the [CBZ + MePRB] (1:1) cocrystal seems a more promising and reliable solid form for further pharmaceutical development.

Introduction to Pharmaceutical Co-amorphous Systems Using a Green Co-milling Technique

The concept of co-amorphous systems is introduced in an integrated laboratory experiment, designed for advanced chemistry students, using solvent-free, environmentally friendly mechanochemistry. The dual-drug naproxen-cimetidine co-amorphous system (NPX-CIM) is investigated as an example of the emergent field of medicinal mechanochemistry. Students are trained in solid-state characterization techniques including X-ray powder diffraction, Fourier-transform infrared spectroscopy, and thermal analysis by differential scanning calorimetry. This lab experiment also provides an opportunity to discuss the relevance of different solid forms of pharmaceutics, emphasizing particular properties of disordered materials. This experiment can easily fit the curriculum of any Chemistry or Pharmacy master level degree in courses dealing with instrumental analysis, solid state chemistry, or green chemistry, for classes of 6 to 18 students, in a 5-h lab session. Suggestions to adapt it to the use of a single characterization technique are provided.

New Lidocaine-Based Pharmaceutical Cocrystals: Preparation, Characterization, and Influence of the Racemic vs. Enantiopure Coformer on the Physico-Chemical Properties

This study describes the preparation, characterization, and influence of the enantiopure vs. racemic coformer on the physico-chemical properties of a pharmaceutical cocrystal. For that purpose, two new 1:1 cocrystals, namely lidocaine:dl-menthol and lidocaine:d-menthol, were prepared. The menthol racemate-based cocrystal was evaluated by means of X-ray diffraction, infrared spectroscopy, Raman, thermal analysis, and solubility experiments. The results were exhaustively compared with the first menthol-based pharmaceutical cocrystal, i.e., lidocaine:l-menthol, discovered in our group 12 years ago. Furthermore, the stable lidocaine/dl-menthol phase diagram has been screened, thoroughly evaluated, and compared to the enantiopure phase diagram. Thus, it has been proven that the racemic vs. enantiopure coformer leads to increased solubility and improved dissolution of lidocaine due to the low stable form induced by menthol molecular disorder in the lidocaine:dl-menthol cocrystal. To date, the 1:1 lidocaine:dl-menthol cocrystal is the third menthol-based pharmaceutical cocrystal, after the 1:1 lidocaine:l-menthol and the 1:2 lopinavir:l-menthol cocrystals reported in 2010 and 2022, respectively. Overall, this study shows promising potential for designing new materials with both improved characteristics and functional properties in the fields of pharmaceutical sciences and crystal engineering.

Non-stoichiometric carbamazepine cocrystal hydrates of 3,4-/3,5-dihydroxybenzoic acids: coformer-water exchange

The cocrystallisation of carbamazepine (CBZ) with 3,4-/3,5-dihydroxybenzoic acids (34/35DHBA) with different stoichiometries formed molecular alloys, exchanging a water molecule, in their isostructural CBZ dihydrate form. Furthermore, we show a correlation between the mechanical properties of the CBZ-DHBA cocrystals with the amount of coformer present.

Virtual Screening, Structural Analysis, and Formation Thermodynamics of Carbamazepine Cocrystals

In this study, the existing set of carbamazepine (CBZ) cocrystals was extended through the successful combination of the drug with the positional isomers of acetamidobenzoic acid. The structural and energetic features of the CBZ cocrystals with 3- and 4-acetamidobenzoic acids were elucidated via single-crystal X-ray diffraction followed by QTAIMC analysis. The ability of three fundamentally different virtual screening methods to predict the correct cocrystallization outcome for CBZ was assessed based on the new experimental results obtained in this study and data available in the literature. It was found that the hydrogen bond propensity model performed the worst in distinguishing positive and negative results of CBZ cocrystallization experiments with 87 coformers, attaining an accuracy value lower than random guessing. The method that utilizes molecular electrostatic potential maps and the machine learning approach named CCGNet exhibited comparable results in terms of prediction metrics, albeit the latter resulted in superior specificity and overall accuracy while requiring no time-consuming DFT computations. In addition, formation thermodynamic parameters for the newly obtained CBZ cocrystals with 3- and 4-acetamidobenzoic acids were evaluated using temperature dependences of the cocrystallization Gibbs energy. The cocrystallization reactions between CBZ and the selected coformers were found to be enthalpy-driven, with entropy terms being statistically different from zero. The observed difference in dissolution behavior of the cocrystals in aqueous media was thought to be caused by variations in their thermodynamic stability.

Rational Coformer Selection in the Development of 6-Propyl-2-thiouracil Pharmaceutical Cocrystals

Pharmaceutical multicomponent solids have proved to efficiently modulate the physicochemical properties of active pharmaceutical ingredients. In this context, polyphenols are interesting coformers for designing pharmaceutical cocrystals due to their wide safety profile and interesting antioxidant properties. The novel 6-propyl-2-thiouracil multicomponent solids have been obtained by mechanochemical synthesis and fully characterized by powder and single-crystal X-ray diffraction methods. The analysis of supramolecular synthons has been further performed with computational methods, with both results revealing a robust supramolecular organization influenced by the different positions of the hydroxyl groups within the polyphenolic coformers. All novel 6-propyl-2-thiouracil cocrystals show an enhanced solubility profile, but unfortunately, their thermodynamic stability in aqueous media is limited to 24 h.

General Graph Neural Network-Based Model To Accurately Predict Cocrystal Density and Insight from Data Quality and Feature Representation

Cocrystal engineering as an effective way to modify solid-state properties has inspired great interest from diverse material fields while cocrystal density is an important property closely correlated with the material function. In order to accurately predict the cocrystal density, we develop a graph neural network (GNN)-based deep learning framework by considering three key factors of machine learning (data quality, feature presentation, and model architecture). The result shows that different stoichiometric ratios of molecules in cocrystals can significantly influence the prediction performances, highlighting the importance of data quality. In addition, the feature complementary is not suitable for augmenting the molecular graph representation in the cocrystal density prediction, suggesting that the complementary strategy needs to consider whether extra features can sufficiently supplement the lacked information in the original representation. Based on these results, 4144 cocrystals with 1:1 stoichiometry ratio are selected as the dataset, supplemented by the data augmentation of exchanging a pair of coformers. The molecular graph is determined to learn feature representation to train the GNN-based model. Global attention is introduced to further optimize the feature space and identify important atoms to realize the interpretability of the model. Benefited from the advantages, our model significantly outperforms three competitive models and exhibits high prediction accuracy for unseen cocrystals, showcasing its robustness and generality. Overall, our work not only provides a general cocrystal density prediction tool for experimental investigations but also provides useful guidelines for the machine learning application. All source codes are freely available at https://github.com/Xiao-Gua00/CCPGraph.

Microwave synthesis of blue emissive carbon dots from 5-sulpho anthranilic acid and 1,5-diphenyl carbazide for sensing of levocetirizine and niflumic acid

In this work, water soluble carbon dots (CDs) were synthesized by using 5- sulpho anthranilic acid (SAA) and 1,5-diphenylycarbazide (DPC) as precursors via microwave-assisted method and named as "SD-CDs". We studied the effect of SAA and DPC molar ratio (1:3, 2:2 and 3:1) for the preparation of blue fluorescent CDs, showing the best emission properties at molar 3:1 ratio of SAA and DPC. The as-prepared SD-CDs emit bright blue color under UV light at 365 nm, and exhibit emission peak at 392 nm when excited at 319 nm. The as-synthesized SD-CDs act as a fluorescent sensor for detection of levocetirizine and niflumic acid through the fluorescence "turn-on-off" mechanism. The developed probe exhibited good linearity in the concentrations (levocetirizine - 1.0-100 µM and niflumic acid - 0.5-100 µM) with detection limits of 3.92 nM and 0.19 µM for levocetirizine and niflumic acid, respectively. Importantly, the developed analytical method was successfully used for the detection of levocetirizine in tablets and niflumic acid in biofluids of human (serum, plasma and urine), showing good recoveries from 97 to 99 %. Thus, this SD-CDs-based fluorescence method has the potential for levocetirizine and niflumic acid assays in biological and pharmaceutical samples.

Critical Analysis and Optimization of Stoichiometric Ratio of Drug-Coformer on Cocrystal Design: Molecular Docking, In Vitro and In Vivo Assessment

In this present research, an attempt has been made to address the influence of drug-coformer stoichiometric ratio on cocrystal design and its impact on improvement of solubility and dissolution, as well as bioavailability of poorly soluble telmisartan. The chemistry behind cocrystallization and the optimization of drug-coformer molar ratio were explored by the molecular docking approach, and theoretical were implemented practically to solve the solubility as well as bioavailability related issues of telmisartan. A new multicomponent solid form, i.e., cocrystal, was fabricated using different molar ratios of telmisartan and maleic acid, and characterized by SEM, DSC and XRD studies. The molecular docking study suggested that specific molar ratios of drug-coformer can successfully cluster with each other and form a specific geometry with favourable energy conformation to form cocrystals. Synthesized telmisartan-maleic acid cocrystals showed remarkable improvement in solubility and dissolution of telmisartan by 9.08-fold and 3.11-fold, respectively. A SEM study revealed the formation of cocrystals of telmisartan when treated with maleic acid. DSC and XRD studies also confirmed the conversion of crystalline telmisartan into its cocrystal state upon treating with maleic acid. Preclinical investigation revealed significant improvement in the efficacy of optimized cocrystals in terms of plasma drug concentration, indicating enhanced bioavailability through improved solubility as well as dissolution of telmisartan cocrystals. The present research concluded that molecular docking is an important path in selecting an appropriate stoichiometric ratio of telmisartan: maleic acid to form cocrystals and improve the solubility, dissolution, and bioavailability of poorly soluble telmisartan.

Cocrystals; basic concepts, properties and formation strategies

Cocrystallization is an old technique and remains the focus of several research groups working in the field of Chemistry and Pharmacy. This technique is basically in field for improving physicochemical properties of material which can be active pharmaceutical ingredients (APIs) or other chemicals with poor profile. So this review article has been presented in order to combine various concepts for scientists working in the field of chemistry, pharmacy or crystal engineering, also it was attempt to elaborate concepts belonging to crystal designing, their structures and applications. A handsome efforts have been made to bring scientists together working in different fields and to make chemistry easier for a pharmacist and pharmacy for chemists pertaining to cocrystals. Various aspects of chemicals being used as co-formers have been explored which predict the formation of co-crystals or molecular salts and even inorganic cocrystals.

Mitigating Drug Stability Challenges Through Cocrystallization

Drug stability plays a significant role in the pharmaceutical industry from early-phase drug discovery to product registration as well as the entire life cycle of a product. Various formulation approaches have been employed to overcome drug stability issues. These approaches are sometimes time-consuming which ultimately affect the timeline of the product launch and may further require formulation optimization steps, affecting the overall cost. Pharmaceutical cocrystal is a well-established route to fine tune the biopharmaceutical properties of drugs without covalent modification. This article highlights the role of cocrystallization in mitigating the stability issues of challenging drug molecules. Representative case studies wherein the drug stability issue is addressed through pharmaceutical cocrystals have been discussed briefly and are summarized in tabular form. The emphasis has been made on the structural information of cocrystals and understanding the mechanism that improves the stability of the parent drug through cocrystallization. Besides, a guided strategy has been proposed to modulate the stability of drug molecules through cocrystallization approach. Finally, the stability concern of fixed-dose or drug combinations and the challenges associated with cocrystals are also touched.

Enhanced NSAIDs Solubility in Drug-Drug Formulations with Ciprofloxacin

Drug-drug salts are a kind of pharmaceutical multicomponent solid in which the two co-existing components are active pharmaceutical ingredients (APIs) in their ionized forms. This novel approach has attracted great interest in the pharmaceutical industry since it not only allows concomitant formulations but also has proved potential to improve the pharmacokinetics of the involved APIs. This is especially interesting for those APIs that have relevant dose-dependent secondary effects, such as non-steroidal anti-inflammatory drugs (NSAIDs). In this work, six multidrug salts involving six different NSAIDs and the antibiotic ciprofloxacin are reported. The novel solids were synthesized using mechanochemical methods and comprehensively characterized in the solid state. Moreover, solubility and stability studies, as well as bacterial inhibition assays, were performed. Our results suggest that our drug-drug formulations enhanced the solubility of NSAIDs without affecting the antibiotic efficacy.

Metformin-NSAIDs Molecular Salts: A Path towards Enhanced Oral Bioavailability and Stability

According to the World Health Organization, more than 422 million people worldwide have diabetes. The most common oral treatment for type 2 diabetes is the drug metformin (MTF), which is usually formulated as a hydrochloride to achieve higher water solubility. However, this drug is also highly hygroscopic, thus showing stability problems. Another kind of worldwide prescribed drug is the non-steroidal anti-inflammatory drug (NSAID). These latter, on the contrary, show a low solubility profile; therefore, they must be administered at high doses, which increases the probability of secondary effects. In this work, novel drug-drug pharmaceutical solids combining MTF-NSAIDs have been synthesized in solution or by mechanochemical methods. The aim of this concomitant treatment is to improve the physicochemical properties of the parent active pharmaceutical ingredients. After a careful solid-state characterization along with solubility and stability studies, it can be concluded that the new molecular salt formulations enhance not only the stability of MTF but also the solubility of NSAIDs, thus giving promising results regarding the development of these novel pharmaceutical multicomponent solids.

Recent Advances in Pharmaceutical Cocrystals: A Focused Review of Flavonoid Cocrystals

Cocrystallization is currently an attractive technique for tailoring the physicochemical properties of active pharmaceutical ingredients (APIs). Flavonoids are a large class of natural products with a wide range of beneficial properties, including anticancer, anti-inflammatory, antiviral and antioxidant properties, which makes them extensively studied. In order to improve the properties of flavonoids, such as solubility and bioavailability, the formation of cocrystals may be a feasible strategy. This review discusses in detail the possible hydrogen bond sites in the structure of APIs and the hydrogen bonding networks in the cocrystal structures, which will be beneficial for the targeted synthesis of flavonoid cocrystals. In addition, some successful studies that favorably alter the physicochemical properties of APIs through cocrystallization with coformers are also highlighted here. In addition to improving the solubility and bioavailability of flavonoids in most cases, flavonoid cocrystals may also alter their other properties, such as anti-inflammatory activity and photoluminescence properties.

Development of a quaternary ammonium poly (amidoamine) dendrimer-based drug carrier for the solubility enhancement and sustained release of furosemide

Furosemide (FRSD) is a loop diuretic that has been categorized as a class IV drug according to the Biopharmaceutics Classification System (BCS). It is used in the treatment of congestive heart failure and edema. Owing to low solubility and permeability, its oral bioavailability is very poor. In this study, two types of poly (amidoamine) dendrimer-based drug carriers (generation G2 and G3) were synthesized to increase the bioavailability of FRSD through solubility enhancement and sustained release. The developed dendrimers enhanced the solubility of FRSD 58- and 109-fold, respectively, compared with pure FRSD. In vitro studies demonstrated that the maximum time taken to release 95% of the drug from G2 and G3 was 420-510 min, respectively, whereas for pure FRSD the maximum time was only 90 min. Such a delayed release is strong evidence for sustained drug release. Cytotoxicity studies using Vero and HBL 100 cell lines through an MTT assay revealed increased cell viability, indicating reduced cytotoxicity and improved bioavailability. Therefore, the present dendrimer-based drug carriers are proven to be prominent, benign, biocompatible, and efficient for poorly soluble drugs, such as FRSD. Therefore, they could be convenient choices for real-time applications of drug delivery.

Structural features, dissolution performance and anthelmintic efficacy of multicomponent solid forms of fenbendazole with maleic and oxalic acids

Two new multicomponent crystalline phases of fenbendazole (FNB), a benzimidazole anthelmintic agent, with maleic and oxalic acids have been prepared, and their structural and physicochemical properties carefully investigated.

New Solid Forms of Nitrofurantoin and 4-Aminopyridine Salt: Influence of Salt Hydration Level on Crystal Packing and Physicochemical Properties

The crystallization of the poorly soluble drug nitrofurantoin (NFT) with 4-aminopyridine (4AmPy) resulted in three multicomponent solid forms with different hydration levels: anhydrous salt [NFT+4AmPy] (1:1), salt monohydrate [NFT+4AmPy+H₂O] (1:1:1), and salt tetrahydrate [NFT+4AmPy+H₂O] (1:1:4). Each salt was selectively prepared by liquid-assisted grinding in the presence of acetonitrile or ethanol/water mixture at a specific composition. The NFT hydrated salts were characterized using single crystal X-ray diffraction. The [NFT+4AmPy+H₂O] salt (1:1:1) crystallized as an isolated site hydrate, while the [NFT+4AmPy+H₂O] salt (1:1:4) crystallized as a channel hydrate. The dehydration processes of the NFT salt hydrates were investigated using differential scanning calorimetry and thermogravimetric analysis. A powder dissolution experiment was carried out for all NFT multicomponent solid forms in pH 7.4 phosphate buffer solution at 37 °C.

Conformational Trimorphism in an Ionic Cocrystal of Hesperetin

We report the existence of conformational polymorphism in an ionic cocrystal (ICC) of the nutraceutical compound hesperetin (HES) in which its tetraethylammonium (TEA⁺) salt serves as a coformer. Three polymorphs, HESTEA-α, HESTEA-β and HESTEA-γ, were characterized by single-crystal X-ray diffraction (SCXRD). Each polymorph was found to be sustained by phenol···phenolate supramolecular heterosynthons that self-assemble with phenol···phenol supramolecular homosynthons into C ₃ ²(7) H-bonded motifs. Conformational variability in HES moieties and different relative orientations of the H-bonded motifs resulted in distinct crystal packing patterns: HESTEA-α and HESTEA-β exhibit H-bonded sheets; HESTEA-γ is sustained by bilayers of H-bonded tapes. All three polymorphs were found to be stable upon exposure to humidity under accelerated stability conditions for 2 weeks. Under competitive slurry conditions, HESTEA-α was observed to transform to the β or γ forms. Solvent selection impacted the relationship between HESTEA-β (favored in EtOH) and HESTEA-γ (favored in MeOH). A mixture of the β and γ forms was found to be present following H₂O slurry.

Crystal Engineering of Ionic Cocrystals Sustained by Azolium···Azole Heterosynthons

Crystal engineering of multi-component molecular crystals, cocrystals, is a subject of growing interest, thanks in part to the potential utility of pharmaceutical cocrystals as drug substances with improved properties. Whereas molecular cocrystals (MCCs) are quite well studied from a design perspective, ionic cocrystals (ICCs) remain relatively underexplored despite there being several recently FDA-approved drug products based upon ICCs. Successful cocrystal design strategies typically depend on strong and directional noncovalent interactions between coformers, as exemplified by hydrogen bonds. Understanding of the hierarchy of such interactions is key to successful outcomes in cocrystal design. We herein address the crystal engineering of ICCs comprising azole functional groups, particularly imidazoles and triazoles, which are commonly encountered in biologically active molecules. Specifically, azoles were studied for their propensity to serve as coformers with strong organic (trifluoroacetic acid and p-toluenesulfonic acid) and inorganic (hydrochloric acid, hydrobromic acid and nitric acid) acids to gain insight into the hierarchy of NH+···N (azolium-azole) supramolecular heterosynthons. Accordingly, we combined data mining of the Cambridge Structural Database (CSD) with the structural characterization of 16 new ICCs (11 imidazoles, 4 triazoles, one imidazole-triazole). Analysis of the new ICCs and 66 relevant hits archived in the CSD revealed that supramolecular synthons between identical azole rings (A+B−A) are much more commonly encountered, 71, than supramolecular synthons between different azole rings (A+B−C), 11. The average NH+···N distance found in the new ICCs reported herein is 2.697(3) Å and binding energy calculations suggested that hydrogen bond strengths range from 31–46 kJ mol−1. The azolium-triazole ICC (A+B−C) was obtained via mechanochemistry and differed from the other ICCs studied as there was no NH+···N hydrogen bonding. That the CNC angles in imidazoles and 1,2,4-triazoles are sensitive to protonation, the cationic forms having larger (approximately 4.4 degrees) values than comparable neutral rings, was used as a parameter to distinguish between protonated and neutral azole rings. Our results indicate that ICCs based upon azolium-azole supramolecular heterosynthons are viable targets, which has implications for the development of new azole drug substances with improved properties.

Virtual Cocrystal Screening of Adefovir Dipivoxyl: Identification of New Solid Forms with Improved Dissolution and Permeation Profiles

The application of a computational screening methodology based on the calculation of intermolecular interaction energies has guided the discovery of new multicomponent solid forms of the oral antiviral Adefovir Dipivoxyl. Three new cocrystals with resorcinol, orcinol and hydroquinone have been synthesized and thoroughly characterized. They show improved dissolution profiles with respect to the single solid form, particularly the cocrystals of orcinol and resorcinol, which have 3.2- and 2-fold faster dissolution rates at stomach conditions (pH 1.5). Moreover, dynamic dissolution experiments that simultaneously mimic both the pH variation along the gastrointestinal tract and the partition into biological membranes show that, in addition to the faster initial dissolution, Adefovir Dipivoxyl also penetrates faster into the organic membranes in the form of resorcinol and orcinol cocrystals.

Mechanical Activation by Ball Milling as a Strategy to Prepare Highly Soluble Pharmaceutical Formulations in the Form of Co-Amorphous, Co-Crystals, or Polymorphs

Almost half of orally administered active pharmaceutical ingredients (APIs) have low solubility, which affects their bioavailability. In the last two decades, several alternatives have been proposed to modify the crystalline structure of APIs to improve their solubility; these strategies consist of inducing supramolecular structural changes in the active pharmaceutical ingredients, such as the amorphization and preparation of co-crystals or polymorphs. Since many APIs are thermosensitive, non-thermal emerging alternative techniques, such as mechanical activation by milling, have become increasingly common as a preparation method for drug formulations. This review summarizes the recent research in preparing pharmaceutical formulations (co-amorphous, co-crystals, and polymorphs) through ball milling to enhance the physicochemical properties of active pharmaceutical ingredients. This report includes detailed experimental milling conditions (instrumentation, temperature, time, solvent, etc.), as well as solubility, bioavailability, structural, and thermal stability data. The results and description of characterization techniques to determine the structural modifications resulting from transforming a pure crystalline API into a co-crystal, polymorph, or co-amorphous system are presented. Additionally, the characterization methodologies and results of intermolecular interactions induced by mechanical activation are discussed to explain the properties of the pharmaceutical formulations obtained after the ball milling process.

Complexation: An Interesting Pathway for Combining Two APIs at the Solid State

Combining different drugs into a single crystal form is one of the current challenges in crystal engineering, with the number of reported multi-drug solid forms remaining limited. This paper builds upon an efficient approach to combining Active Pharmaceutical Ingredients (APIs) containing carboxylic groups in their structure with APIs containing pyridine moieties. By transforming the former into their zinc salts, they can be successfully combined with the pyridine-containing APIs. This work highlights the successfulness of this approach, as well as the improvement in the physical properties of the obtained solid forms.

Towards the Development of Novel Diclofenac Multicomponent Pharmaceutical Solids

Multicomponent pharmaceutical materials offer new opportunities to address drug physicochemical issues and to obtain improved drug formulation, especially on oral administration drugs. This work reports three new multicomponent pharmaceutical crystals of the non-steroidal anti-inflammatory drug diclofenac and the nucleobases adenine, cytosine, and isocytosine. They have been synthesized by mechanochemical methods and been characterized in-depth in solid-state by powder and single crystal X-ray diffraction, as well as other techniques such as thermal analyses and infrared spectroscopy. Stability and solubility tests were also performed on these materials. This work aimed to evaluate the physicochemical properties of these solid forms, which revealed thermal stability improvement. Dissociation of the new phases was observed in water, though. This fact is consistent with the reported observed layered structures and BFDH morphology calculations.

Impact of the Dicarboxylic Acid Chain Length on Intermolecular Interactions with Lidocaine

Acid-base multicomponent systems have become a popular choice as a strategy to fine-tune the physicochemical properties of active pharmaceutical ingredients. Current prediction tools based on the principles of anticrystal engineering cannot always accurately predict the nature of intermolecular interactions within a multicomponent system. Even small changes in the physicochemical parameters of parent components can result in unexpected outcomes, and many salt, cocrystal, and ionic liquid forms are still being discovered empirically. In this work, we aimed to establish structural consistency in a series of mixtures comprising lidocaine (LID) with decanedioic, undecanedioic, dodecanedioic, and tridecanedioic acids and to explore how length and flexibility of the acid carbon backbone affect the molecular recognition, crystallization, and thermal behavior of the expected binary systems. We found that neat grinding of LID with dicarboxylic acids results in the formation of eutectic phases. The observed eutectic melting points deviated from the ideal eutectic temperatures predicted by the Schroeder van Laar model because of hydrogen bonding between the reacting components within the mixtures. Furthermore, thermal and infrared analysis provided evidence for the possible formation of new phases stemming from partial ionization of the counterions. Besides, the structure of a previously undetermined form I of the tridecanedioic acid was solved by single crystal X-ray diffraction.