Dissemination of human adenoviruses and rotavirus species A on fomites of hospital pediatric units

Reservoirs of Nosocomial Pathogens in Intensive Care Units: A Systematic Review

Background

Nosocomial pathogens are known to exacerbate morbidity and mortality in contemporary critical healthcare. Hospital fomites, which include inanimate surfaces, have been identified as "breeding grounds" for pathogens that cause nosocomial infections. This systematic review aimed to deliver incisive insights on nosocomial pathogens in intensive care units (ICUs) and the role of fomites as potential reservoirs for their transmission.

Method

An extensive exploration of electronic databases, including PubMed and Scopus, from 1990 to 2023, was carried out between 25th and 29th May 2023, per standard PRISMA guidelines. Information were extracted from articles that reported on fomites in the ICU. Studies that did not quantitatively report the fomite contamination, and those that exclusively took samples from patients in the ICU were excluded from the analysis.

Results

About 40% of the total samples collected on fomites from all the studies yielded microbial growth, with species of Staphylococcus being the most predominant. Other prevalent microbes were Acinetobacter baumannii, Escherichia coli, Klebsiella pneumoniae, Candida spp., Enterococcus sp., and Enterobacter sp. The neonatal intensive care unit (NICU) had the highest proportion of contaminated fomites. Among known fomites, the sphygmomanometer exhibited a 100% detection rate of nosocomial pathogens. This included E. aerogenes, Staphylococcus aureus, coagulase-negative Staphylococci (CoNS), E. coli, and K. pneumoniae. Multidrug-resistant (MDR) bacteria, such as methicillin-resistant S. aureus (MRSA), vancomycin-resistant Enterococci (VRE), extended-spectrum beta-lactamase (ESBL)-producing E. coli, and MDR Pseudomonas aeruginosa were commonly isolated on fomites in the ICUs.

Conclusion

Many fomites that are readily used in patient care in the ICU harbour nosocomial pathogens. The most common fomite appeared to be mobile phones, sphygmomanometers, and stethoscopes, with Staphylococcus being the most common contaminant. Consequently, the need for rigorous disinfection and sterilization protocols on fomites in the ICU cannot be overemphasized. Additionally, heightened awareness on the subject among health professionals is crucial to mitigating the risk and burden of nosocomial infections caused by drug-resistant bacteria.

Occurrence of Human Viruses on Fomites in the Environment: A Systematic Review and Meta-analysis

Documenting the occurrence of viruses on fomites is crucial in determining the significance of fomite-mediated transmission and the potential use of fomites for environmental disease surveillance. We conducted a systematic review and meta-analysis to compile information on the occurrence of human viruses on fomites in the environment; we identified 134 peer-reviewed papers. We compiled sampling and measurement methods, results, quality control information, and whether virus data were compared with community health data from the papers. We conducted univariate and multivariate analyses to investigate if presence of virus on fomites was associated with virus type (enveloped, nonenveloped), sampling location (healthcare setting, nonhealthcare temporary setting, nonhealthcare nontemporary setting), and area of fomite swabbed (<50, 50-100, >100 cm2). Across 275 data sets from the 134 papers, there was the most data available for Coronaviridae and from fomites at hospitals. Positivity rates, defined as the percent positive fomite samples, were low (median = 6%). Data were available on viruses from 16 different viral families, but data on viruses from 9 families had few (n < 5) data sets. Many human virus families were not identified in this review (11 families). Less than 15% of the data sets reported virus concentrations in externally valid units (viruses per area of surface), and 16% provided a quantitative comparison between virus and health data. Virus type and area swabbed were significant predictors of virus presence on fomites, and the positivity rate of data sets collected from healthcare settings and nonhealthcare nontemporary settings (e.g., individual housing) were significantly higher than those collected in nonhealthcare temporary settings (e.g., restaurants). Data from this review indicates that viruses may be present on fomites, that fomite-mediated virus transmission may occur, and that fomites may provide information on circulation of infectious diseases in the community. However, more quantitative data on diverse viruses are needed, and method reporting needs significant improvements.

Microbiome and virome on indoor surfaces of an Antarctic research ship

BACKGROUND

Few studies have focused on microbial diversity in indoor environments of ships, as well as the role of the microbiome and its ecological interconnections. In this study, we investigated the microbiome and virome present on the internal surfaces of a polar ship in different stages (beginning, during, and at the end) of the Brazilian Antarctic expedition in order to evaluate abundance of microorganisms in different periods.

OBJECTIVES AND METHODS

We used shotgun metagenomic analysis on pooled samples from sampling surfaces in the ship's interior to track the microbial diversity.

FINDINGS

Considering the total fraction of the microbiome, the relative abundance of bacteria, eukaryotes, viruses, and archaea was 83.7%, 16.2%, 0.04%, and 0.002%, respectively. Proteobacteria was the most abundant bacterial phyla, followed by Firmicutes, Actinobacteria, and Bacteroidetes. Concerning the virome, the greatest richness of viral species was identified during the middle of the trip, including ten viral families after de novo assembly: Autographiviridae, Chrysoviridae, Genomoviridae, Herelleviridae, Myoviridae, Partitiviridae, Podoviridae, Potyviridae, Siphoviridae, and Virgaviridae.

MAIN CONCLUSIONS

This study contributed to the knowledge of microbial diversity in naval transportation facilities, and variations in the abundance of microorganisms probably occurred due to factors such as the number of passengers and activities on the ship.

Paper-based diagnostic chips for viral detection

Viruses cause various diseases in humans, and pose serious health risks to individuals and populations worldwide. As a result, various diagnostic procedures and methods have been developed to prevent, manage, and reduce the burden of viral diseases, each with its own benefits and drawbacks. Among these, paper-based diagnostic chips are becoming increasingly common because of their speed, accuracy, convenience, and economical and environmental friendliness. These paper-based diagnostic tests have ideal point-of-care (POC) diagnostic applications, particularly in personalized healthcare. Paper-based diagnostics have emerged as innovative and low-cost solutions for diagnosing viral diseases in remote and underdeveloped regions where traditional diagnostic methods are not readily available. These tests are easy to use, require minimal equipment, and can be performed by nonspecialized personnel, making them accessible even in resource-constrained settings. In this review, we discuss recent developments in paper-based diagnostic chips, the importance of improved methods for identifying viral pathogens, drawbacks of traditional detection techniques, and challenges and prospects of paper-based diagnostic chips for the detection of viruses.

Viricidal Activity of Thermoplastic Polyurethane Materials with Silver Nanoparticles

The use of diverse Ag-based nanoparticulated forms has shown promising results in controlling viral propagation. In this study, a commercial nanomaterial consisting of ceramic-coated silver nanoparticles (AgNPs) was incorporated into thermoplastic polyurethane (TPU) plates using an industrial protocol, and the surface composition, ion-release dynamics and viricidal properties were studied. The surface characterization by FESEM-EDX revealed that the molar composition of the ceramic material was 5.5 P:3.3 Mg:Al and facilitated the identification of the embedded AgNPs (54.4 ± 24.9 nm). As determined by ICPMS, the release rates from the AgNP-TPU into aqueous solvents were 4 ppm/h for Ag and Al, and 28.4 ppm/h for Mg ions. Regarding the biological assays, the AgNP-TPU material did not induce significant cytotoxicity in the cell lines employed. Its viricidal activity was characterized, based on ISO 21702:2019, using the Spring viraemia of carp virus (SVCV), and then tested against the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). The results demonstrated that AgNP-TPU materials exhibited significant (75%) and direct antiviral activity against SVCV virions in a time- and temperature-dependent manner. Similar inhibition levels were found against SARS-CoV-2. These findings show the potential of AgNP-TPU-based materials as a supporting strategy to control viral spread.

Antimicrobial coatings for environmental surfaces in hospitals: a potential new pillar for prevention strategies in hygiene

Recent reports provide evidence that contaminated healthcare environments represent major sources for the acquisition and transmission of pathogens. Antimicrobial coatings (AMC) may permanently and autonomously reduce the contamination of such environmental surfaces complementing standard hygiene procedures. This review provides an overview of the current status of AMC and the demands to enable a rational application of AMC in health care settings. Firstly, a suitable laboratory test norm is required that adequately quantifies the efficacy of AMC. In particular, the frequently used wet testing (e.g. ISO 22196) must be replaced by testing under realistic, dry surface conditions. Secondly, field studies should be mandatory to provide evidence for antimicrobial efficacy under real-life conditions. The antimicrobial efficacy should be correlated to the rate of nosocomial transmission at least. Thirdly, the respective AMC technology should not add additional bacterial resistance development induced by the biocidal agents and co- or cross-resistance with antibiotic substances. Lastly, the biocidal substances used in AMC should be safe for humans and the environment. These measures should help to achieve a broader acceptance for AMC in healthcare settings and beyond. Technologies like the photodynamic approach already fulfil most of these AMC requirements.

Longitudinal Study of Viral and Bacterial Contamination of Hospital Pediatricians' Mobile Phones

Mobile phones (MPs) of healthcare workers (HCWs) may represent an important source of transmission of infectious agents. This longitudinal study documents the contamination of these tools. Ten MPs handled by senior pediatricians were sampled once a week during 23 weeks in three pediatric wards of the University Hospital of Saint-Etienne, France. Cultures were performed for bacteria and multiplex PCR assays for a panel of respiratory and enteric viruses. A questionnaire on hygiene habits regarding phoning and care was filled-in by pediatricians before and after the study. From a total of 230 samples, 145 (63%) were contaminated by at least one pathogen. The MPs from emergency departments were the most impacted. Viruses were detected in 179 samples; bacteria were isolated in 59 samples. Contamination increased during the winter epidemic peak. A cross-contamination by Paracoccus yeei between hands and MPs of different HCWs was demonstrated. The communication of the study results influenced the hygiene behaviors. This study highlights the contamination of MPs by pathogens that are resistant in the environment, and its sustainability along the winter season. The role of MPs as vectors of nosocomial infection needs to be better investigated.

CrAssphage as a Novel Tool to Detect Human Fecal Contamination on Environmental Surfaces and Hands

CrAssphage is a recently discovered human gut–associated bacteriophage. To validate the potential use of crAssphage for detecting human fecal contamination on environmental surfaces and hands, we tested stool samples (n = 60), hand samples (n = 30), and environmental swab samples (n = 201) from 17 norovirus outbreaks for crAssphage by real-time PCR. In addition, we tested stool samples from healthy persons (n = 173), respiratory samples (n = 113), and animal fecal specimens (n = 68) and further sequenced positive samples. Overall, we detected crAssphage in 71.4% of outbreak stool samples, 48%–68.5% of stool samples from healthy persons, 56.2% of environmental swabs, and 60% of hand rinse samples, but not in human respiratory samples or animal fecal samples. CrAssphage sequences could be grouped into 2 major genetic clusters. Our data suggest that crAssphage could be used to detect human fecal contamination on environmental surfaces and hands.

Estimating the effect of hand hygiene compliance and surface cleaning timing on infection risk reductions with a mathematical modeling approach

BACKGROUND

Quantitative tools are needed to relate infection control interventions to infection risk reductions.

METHODS

A model for predicting virus concentrations on hands was used to predict rotavirus, rhinovirus, and influenza A virus doses. Variability in behaviors, transfer efficiencies for various contact types, and surface areas of contact were included. Dose-response curves were used to relate estimated doses to infection risks. Percent reductions from baseline in average rotavirus, rhinovirus, and influenza A virus dose and infection risk were calculated for interventions.

RESULTS

Baseline average infection risks for rotavirus, rhinovirus, and influenza A virus were 0.43, 0.20, and 5.51 × 10^-6, respectively. One and 2 cleaning events decreased average viral infection risks by 6.98%-17.06% and 13.95%-34.66%, respectively. A 15% increase in hand compliance decreased average infection risks by 6.98%-20.51%. A 15% increase in hand hygiene compliance paired with 2 cleaning events decreased average infection risks by 20.93%-47.55%.

DISCUSSION

This study demonstrates the infection risk benefits of combined interventions.

CONCLUSIONS

Models such as the one in this study could be used to optimize timing and frequency of cleaning events and to create hand hygiene compliance goals to achieve infection risk targets.

How to carry out microbiological sampling of healthcare environment surfaces? A review of current evidence

There is increasing evidence that the hospital surface environment contributes to the spread of pathogens. However, evidence on how best to sample these surfaces is inconsistent and there is no guidance or legislation in place on how to do this. The aim of this review was to assess current literature on surface sampling methodologies, including the devices used, processing methods, and the environmental and biological factors that might influence results. Studies published prior to March 2019 were selected using relevant keywords from ScienceDirect, Web of Science, and PubMed. Abstracts were reviewed and all data-based studies in peer-reviewed journals in the English language were included. Microbiological air and water sampling in the hospital environment were not included. Although the numbers of cells or virions recovered from hospital surface environments were generally low, the majority of surfaces sampled were microbiologically contaminated. Of the organisms detected, multidrug-resistant organisms and clinically significant pathogens were frequently isolated and could, therefore, present a risk to vulnerable patients. Great variation was found between methods and the available data were incomplete and incomparable. Available literature on sampling methods demonstrated deficits with potential improvements for future research. Many of the studies included in the review were laboratory-based and not undertaken in the real hospital environment where sampling recoveries could be affected by the many variables present in a clinical environment. It was therefore difficult to draw overall conclusions; however, some recommendations for the design of routine protocols for surface sampling of healthcare environments can be made.

Self-disinfecting surfaces and infection control

According to World Health Organization, every year in the European Union, 4 million patients acquire a healthcare associated infection. Even though some microorganisms represent no threat to healthy people, hospitals harbor different levels of immunocompetent individuals, namely patients receiving immunosuppressors, with previous infections, or those with extremes of age (young children and elderly), requiring the implementation of effective control measures. Public spaces have also been found an important source of infectious disease outbreaks due to poor or none infection control measures applied. In both places, surfaces play a major role on microorganisms' propagation, yet they are very often neglected, with very few guidelines about efficient cleaning measures and microbiological assessment available. To overcome surface contamination problems, new strategies are being designed to limit the microorganisms' ability to survive over surfaces and materials. Surface modification and/or functionalization to prevent contamination is a hot-topic of research and several different approaches have been developed lately. Surfaces with anti-adhesive properties, with incorporated antimicrobial substances or modified with biological active metals are some of the strategies recently proposed. This review intends to summarize the problems associated with contaminated surfaces and their importance on infection spreading, and to present some of the strategies developed to prevent this public health problem, namely some already being commercialized.

Universal rotavirus vaccination program in Sicily: Reduction in health burden and cost despite low vaccination coverage

Rotavirus is considered the main cause of severe gastroenteritis and nosocomial infections in Pediatric units, especially during late winter and early spring season in temperate region. In 2013 Sicilian Region, for the first time in Italy, introduced universal Rotavirus vaccination. This study aims to estimate health and economic impact on rotavirus Gastroenteritis (RVGE) among children aged 0–59 months in Sicily, after rotavirus vaccine introduction.

We analyzed hospital discharge records including a diagnosis of RVGE occurred from 1^st January 2009 to 31^st December 2016 among hospitalized children aged 0 to 59 months, residents in Sicily. RVGEs were defined as all hospitalizations with an ICD-9-CM diagnosis code of 008.61 on first or any diagnosis position. Also an economic impact analysis on Health Regional System was conducted.

We observed a consistent decline of hospitalization after rotavirus vaccination introduction from 394 per 100,000 in 2009–2012 to 220 per 100,000 in 2013–2016. We found a change in the peak of reported cases by at least one month from March-April in the pre-vaccination period to May-June in the post-vaccination period. Since 2013, we estimated that the annual average cost saved is 1,134,056 € when considering direct and indirect costs to health care as well as vaccination costs.

Our study is the first analysis conducted as far as we are aware in a high-income setting with poor coverage (lower than 50%), demonstrating a significant reduction of RVGE hospitalizations in Sicily after vaccine introduction. Moreover, was observed a consistent impact of vaccination on health care cost saving.

Swab Sampling Method for the Detection of Human Norovirus on Surfaces

Human noroviruses are a leading cause of epidemic and sporadic gastroenteritis worldwide. Because most infections are either spread directly via the person-to-person route or indirectly through environmental surfaces or food, contaminated fomites and inanimate surfaces are important vehicles for the spread of the virus during norovirus outbreaks. We developed and evaluated a protocol using macrofoam swabs for the detection and typing of human noroviruses from hard surfaces. Compared with fiber-tipped swabs or antistatic wipes, macrofoam swabs allow virus recovery (range 1.2-33.6%) from toilet seat surfaces of up to 700 cm2. The protocol includes steps for the extraction of the virus from the swabs and further concentration of the viral RNA using spin columns. In total, 127 (58.5%) of 217 swab samples that had been collected from surfaces in cruise ships and long-term care facilities where norovirus gastroenteritis had been reported tested positive for GII norovirus by RT-qPCR. Of these 29 (22.8%) could be successfully genotyped. In conclusion, detection of norovirus on environmental surfaces using the protocol we developed may assist in determining the level of environmental contamination during outbreaks as well as detection of virus when clinical samples are not available; it may also facilitate monitoring of effectiveness of remediation strategies.