Algal biofilm based technology for wastewater treatment

Promoting microalgal biofilm formation by crushed oyster shell-hydroxyapatite layer on micropatterned aluminum coating for heavy metal ions removal

Microalgal biomass has shown inspiring potential for the heavy metal removal from wastewater, and forming microalgal biofilm is one of the sustainable methods for the microalgal biomass production. Here we report the formation of microalgal biofilm by accelerated colonization of typical algae Chlorella on thermal sprayed aluminum (Al) coatings with biologically modified surfaces. Micro-patterning surface treatment of the Al coatings promotes the attachment of Chlorella from 6.31 % to 17.51 %. Further enhanced algae attachment is achieved through liquid flame spraying a bioactive crushed oyster shell-hydroxyapatite (CaCO3-HA) composite top layer on the micropatterned coating, reaching 46.03-49.62 % of Chlorella attachment ratio after soaking in Chlorella suspension for 5 days. The rapidly formed microalgal biofilm shows an adsorption ratio of 95.43 % and 85.23 % for low concentration Zn2+ and Cu2+ in artificial seawater respectively within 3 days. Quick interaction has been realized between heavy metal ions and the negatively-charged extracellular polymeric substances (EPS) matrix existing in the biofilm. Fourier transform infrared spectroscopy (FTIR) results indicate that both carboxyl and phosphoryl groups of biofilms are crucial in the adsorption of Cu2+ and the adsorption of Zn2+ is due to the hydroxyl and phosphate groups. Meanwhile, the biofilm could act as a barrier to protect Chlorella against the attack of the heavy metal ions with relatively low concentrations in aqueous solution. The route of quick cultivating microalgal biofilm on marine structures through constructing biological layer on their surfaces would give insight into developing new techniques for removing low concentration heavy metal ions from water for environmental bioremediation.

Taxonomic variation, plastic degradation, and antibiotic resistance traits of plastisphere communities in the maturation pond of a wastewater treatment plant

Wastewater treatment facilities can filter out some plastics before they reach the open environment, yet microplastics often persist throughout these systems. As they age, microplastics in wastewater may both leach and sorb pollutants and fragment to provide an increased surface area for bacterial attachment and conjugation, possibly impacting antimicrobial resistance (AMR) traits. Despite this, little is known about the effects of persistent plastic pollution on microbial functioning. To address this knowledge gap, we deployed five different artificially weathered plastic types and a glass control into the final maturation pond of a municipal wastewater treatment plant in Ōtautahi-Christchurch, Aotearoa/New Zealand. We sampled the plastic-associated biofilms (plastisphere) at 2, 6, 26, and 52 weeks, along with the ambient pond water, at three different depths (20, 40, and 60 cm from the pond water surface). We investigated the changes in plastisphere microbial diversity and functional potential through metagenomic sequencing. Bacterial 16S ribosomal RNA genes composition did not vary among plastic types and glass controls (P = 0.997) but varied among sampling times [permutational multivariate analysis of variance (PERMANOVA), P = 0.001] and depths (PERMANOVA, P = 0.011). Overall, there was no polymer-substrate specificity evident in the total composition of genes (PERMANOVA, P = 0.67), but sampling time (PERMANOVA, P = 0.002) and depth were significant factors (PERMANOVA, P = 0.001). The plastisphere housed diverse AMR gene families, potentially influenced by biofilm-meditated conjugation. The plastisphere also harbored an increased abundance of genes associated with the biodegradation of nylon, or nylon-associated substances, including nylon oligomer-degrading enzymes and hydrolases.IMPORTANCEPlastic pollution is pervasive and ubiquitous. Occurrences of plastics causing entanglement or ingestion, the leaching of toxic additives and persistent organic pollutants from environmental plastics, and their consequences for marine macrofauna are widely reported. However, little is known about the effects of persistent plastic pollution on microbial functioning. Shotgun metagenomics sequencing provides us with the necessary tools to examine broad-scale community functioning to further investigate how plastics influence microbial communities. This study provides insight into the functional consequence of continued exposure to waste plastic by comparing the prokaryotic functional potential of biofilms on five types of plastic [linear low-density polyethylene (LLDPE), nylon-6, polyethylene terephthalate, polylactic acid, and oxygen-degradable LLDPE], glass, and ambient pond water over 12 months and at different depths (20, 40, and 60 cm) within a tertiary maturation pond of a municipal wastewater treatment plant.

Performance evaluation of species varied fixed bed biofilm reactor for wastewater treatment of Dhobi Khola outfall, Setopul, Kathmandu, Nepal

The sustainability of wastewater treatment plants poses significant challenges for developing countries, necessitating substantial investment for operation and maintenance. Biofilm reactors seeded with specific species of microorganisms were investigated under controlled environmental conditions. However, the performance evaluation of such reactors under natural conditions remains largely underexplored. This study investigated wastewater treatment capabilities of bench-scale fixed bed biofilm reactors, employing various species (Wastewater Microbes, Pseudomonas, Algae, and a co-culture of Algae and Pseudomonas). The reactors (Treatments and Control) were filled with 28 mm nominal-size local aggregates as packing media, operated under different contact times, and subjected to varying concentrations of heavy metals (Zn, Cd). To assess the reactor performances, the Bland-Altman Plot and Chemical Oxygen Demand (COD) removal kinetics were evaluated. The results revealed that the reactor initiated with a co-culture exhibited the optimal COD removal efficiency, reaching 84 ± 1 %. The reactor initially seeded with wastewater microbes exhibited the highest heavy metal elimination, achieving 94 ± 1 % and 88 ± 1 % removal for Zn and Cd respectively. The wastewater-seeded reactor demonstrated the zero-order COD removal kinetic coefficient (k) of 46.41 mg/L/h at an average influent COD concentration of 558 mg/L at 10 h contact time. While Pseudomonas-seeded reactor demonstrated k = 0.73 mg/L/h at 20 h contact time with 69 mg/L influent COD and heavy metal concentrations Zn = 26 mg/L and Cd = 3.57 mg/L. The findings of this study suggest that variations in environmental conditions, contact time, and heavy metal concentration have minimal impact on the pollutant removal efficacy of the reactors, and provide robust evidence for their viability as a sustainable alternative in municipal wastewater treatment. The study also identifies the possibility of treating specific wastewater characteristics by altering the dominant species in the reactors, paving the way for further research on the efficacy of other microbial genomes in fixed bed biofilm reactors.

Design, construction and application of algae-bacteria synergistic system for treating wastewater

The wastewater treatment technology of algae-bacteria synergistic system (ABSS) is a promising technology which has the advantages of low energy consumption, good treatment effect and recyclable high-value products. In this treatment technology, the construction of an ABSS is a very important factor. At the same time, the emergence of some new technologies (such as microbial fuel cells and bio-carriers, etc.) has further enriched constructing the novel ABSS, which could improve the efficiency of wastewater treatment and the biomass harvesting rate. Thus, this review focuses on the construction of a novel ABSS in wastewater treatment in order to provide useful suggestions for the technology of wastewater treatment.

Applications of the Microalgae Chlamydomonas and Its Bacterial Consortia in Detoxification and Bioproduction

The wide metabolic diversity of microalgae, their fast growth rates, and low-cost production make these organisms highly promising resources for a variety of biotechnological applications, addressing critical needs in industry, agriculture, and medicine. The use of microalgae in consortia with bacteria is proving valuable in several areas of biotechnology, including the treatment of various types of wastewater, the production of biofertilizers, and the extraction of various products from their biomass. The monoculture of the microalga Chlamydomonas has been a prominent research model for many years and has been extensively used in the study of photosynthesis, sulphur and phosphorus metabolism, nitrogen metabolism, respiration, and flagellar synthesis, among others. Recent research has increasingly recognised the potential of Chlamydomonas-bacteria consortia as a biotechnological tool for various applications. The detoxification of wastewater using Chlamydomonas and its bacterial consortia offers significant potential for sustainable reduction of contaminants, while facilitating resource recovery and the valorisation of microalgal biomass. The use of Chlamydomonas and its bacterial consortia as biofertilizers can offer several benefits, such as increasing crop yields, protecting crops, maintaining soil fertility and stability, contributing to CO2 mitigation, and contributing to sustainable agricultural practises. Chlamydomonas-bacterial consortia play an important role in the production of high-value products, particularly in the production of biofuels and the enhancement of H2 production. This review aims to provide a comprehensive understanding of the potential of Chlamydomonas monoculture and its bacterial consortia to identify current applications and to propose new research and development directions to maximise their potential.

Optimization of H2O2 Production in Biological Systems for Design of Bio-Fenton Reactors

The treatment of antibiotic wastewater, which is known for its micro-toxicity, inhibition, and poor biochemistry, poses significant challenges, including complex processes, high energy demands, and secondary pollution. Bio-Fenton, a novel Fenton technology, enables the in situ production of H2O2 at near-neutral pH, having low energy requirements and sustainable properties, and reduces the hazards of H2O2 transportation and storage. We preliminary self-designed a heterogeneous Bio-Fenton reactor. An aerobic SBBR system with pure algae, pure bacteria, and bacteria-algae symbiosis was first constructed to investigate the optimal process conditions through the effects of carbon source concentration, light duration, bamboo charcoal filling rate, and dissolved oxygen (DO) content on the H2O2 production and COD removal. Second, the reactor was constructed by adding iron-carrying catalysts to remove ROX and SDZ wastewater. The results demonstrated that the optimal operating parameters of aerobic SBBR were an influent carbon source concentration of 500 mg/L, a water temperature of 20 ± 2 °C, pH = 7.5, a dissolved oxygen content of 5 mg/L, a light-dark ratio of 12 h:12 h, a light intensity of 2500 Lux, an HRT of 10 h, and a bamboo charcoal filling rate of 33%. Given these conditions, the bacterial-algal system was comprehensively found to be the most suitable biosystem for this experiment. Ultimately, the dynamically coupled Bio-Fenton process succeeded in the preliminary removal of 41.32% and 42.22% of the ROX and SDZ from wastewater, respectively.

Cultivation of algal biofilm and mat communities from the Garhwal Himalayas for possible use in diverse biotechnological applications

The current study aimed to screen biofilm-/mat-forming and fast-growing algal communities from the Garhwal Himalayas, India. A total of 15 biofilm/mat-forming algal samples were collected, 8 biofilms out of these could be cultured and analyzed for their growth and development with time. Light microscopy was used to identify different types of cyanobacteria and algae present in the different collected biofilms/mats. Four biofilm and mat communities, namely biofilms #E, #F, #G, and #H, were found to have fast growth and were quick to colonize the substratum. Nylon net was identified as the most cost-effective and best-supporting material for biofilm development and biomass production. The study also found that increasing the harvesting frequency from the nylon net-enmeshed biofilms at least once a week would enhance the final biomass yield compared to harvesting the community once after a longer growth duration. Nevertheless, the findings reported here will be useful for researchers in developing phototrophic biofilm-based technology using nylon net, as it will be mechanically strong, supportive, and easy to handle.

Exploring the dynamics of astaxanthin production in Haematococcus pluvialis biofilms using a rotating biofilm-based system

Microalgae biofilm emerged as a solid alternative to conventional suspended cultures which present high operative costs and complex harvesting processes. Among several designs, rotating biofilm-based systems stand out for their scalability, although their primary applications have been in wastewater treatment and aquaculture. In this work, a rotating system was utilized to produce a high-value compound (astaxanthin) using Haematococcus pluvialis biofilms. The effect of nitrogen regime, light intensity, and light history on biofilm traits was assessed to better understand how to efficiently operate the system. Our results show that H. pluvialis biofilms follow the classical growth stages described for bacterial biofilms (from adhesion to maturation) and that a two-stage (green and red stages) allowed to reach astaxanthin productivities of 204 mg m-2  d-1 . The higher light intensity applied during the red stage (400 and 800 µmol m-2  s-1 ) combined with nitrogen depletion stimulated similar astaxanthin productivities. However, by training the biofilms during the green stage, using mild-light intensity (200 µmol m-2  s-1 ), a process known as priming, the final astaxanthin productivity was enhanced by 40% with respect to biofilms pre-exposed to 50 µmol m-2  s-1 . Overall, this study shows the possibility of utilizing rotating microalgae biofilms to produce high-value compounds laying the foundation for further biotechnological applications of these emerging systems.

Emerging revolving algae biofilm system for algal biomass production and nutrient recovery from wastewater

Toward the direction of zero‑carbon emission and green technologies for wastewater treatment, algae-based technologies are considered promising candidates to deal with the current situation of pollution and climate change. Recent developments of algae-based technologies have been introduced in previous studies in which their performances were optimized for wastewater treatment and biomass production. Among these, revolving algae biofilm (RAB) reactors have been proven to have a great potential in high biomass productivity, simple harvesting method, great CO2 transfer rate, high light-use efficiency, heavy metal capture, nutrient removal, and acid mine drainage treatment in previous studies. However, there were few articles detailing RAB performance, which concealed its enormous potential and diminished interest in the model. Hence, this review aims to reveal the major benefit of RAB reactors in simultaneous wastewater treatment and biomass cultivation. However, there is still a lack of research on aspects to upgrade this technology which requires further investigations to improve performance or fulfill the concept of circular economy.

A critical review on phycoremediation of pollutants from wastewater-a novel algae-based secondary treatment with the opportunities of production of value-added products

Though the biological treatment employing bacterial strains has wide application in effluent treatment plant, it has got several limitations. Researches hence while looking for alternative biological organisms that can be used for secondary treatment came up with the idea of using microalgae. Since then, a large number of microalgal/cyanobacterial strains have been identified that can efficiently remove pollutants from wastewater. Some researchers also found out that the algal biomass not only acts as a carbon sink by taking up carbon dioxide from the atmosphere and giving oxygen but also is a renewable source of several value-added products that can be extracted from it for the commercial use. In this work, the cleaning effect of different species of microalgae/cyanobacteria on wastewater from varied sources along with the value-added products obtained from the algal biomass as observed by researchers during the past few years are reviewed. While a number of review works in the field of phycoremediation technology was reported in literature, a comprehensive study on phycoremediation of wastewater from different industries and household individually is limited. In the present review work, the efficiency of diverse microalgal/cyanobacterial strains in treatment of wide range of industrial effluents along with municipal wastewater having multi-pollutants has been critically reviewed.

Potential of Porous Substrate Bioreactors for Removal of Pollutants from Wastewater Using Microalgae

Porous substrate bioreactors (PSBRs) are a new technology to grow microalgae immobilized in a dense culture and solve some problems linked to suspended cultivation. During recent years, this technology has been used in laboratory and pilot setups in different fields of environmental biotechnology, such as wastewater treatment. The aim of this short review is to introduce the PSBR technology, summarize the results obtained in removing some pollutants from wastewater, provide an assessment of the potential of PSBRs for wastewater treatment, and the subsequent use of the algal biomass for other purposes.

Experimental and theoretical investigations of rotating algae biofilm reactors (RABRs): Areal productivity, nutrient recovery, and energy efficiency

Microalgae biofilms have been demonstrated to recover nutrients from wastewater and serve as biomass feedstock for bioproducts. However, there is a need to develop a platform to quantitatively describe microalgae biofilm production, which can provide guidance and insights for improving biomass areal productivity and nutrient uptake efficiency. This paper proposes a unified experimental and theoretical framework to investigate algae biofilm growth on a rotating algae biofilm reactor (RABR). Experimental laboratory setups are used to conduct controlled experiments on testing environmental and operational factors for RABRs. We propose a differential-integral equation-based mathematical model for microalgae biofilm cultivation guided by laboratory experimental findings. The predictive mathematical model development is coordinated with laboratory experiments of biofilm areal productivity associated with ammonia and inorganic phosphorus uptake by RABRs. The unified experimental and theoretical tool is used to investigate the effects of RABR rotating velocity, duty cycle (DC), and light intensity on algae biofilm growth, areal productivity, nutrient uptake efficiency, and energy efficiency in wastewater treatment. Our framework indicates that maintaining a reasonable light intensity range improves biomass areal productivity and nutrient uptake efficiency. Our framework also indicates that faster RABR rotation benefits biomass areal productivity. However, maximizing the nutrient uptake efficiency requires a reasonably low RABR rotating speed. Energy efficiency is strongly correlated with RABR rotating speed and DC.

Microalgal co-cultivation -recent methods, trends in omic-studies, applications, and future challenges

The burgeoning human population has resulted in an augmented demand for raw materials and energy sources, which in turn has led to a deleterious environmental impact marked by elevated greenhouse gas (GHG) emissions, acidification of water bodies, and escalating global temperatures. Therefore, it is imperative that modern society develop sustainable technologies to avert future environmental degradation and generate alternative bioproduct-producing technologies. A promising approach to tackling this challenge involves utilizing natural microbial consortia or designing synthetic communities of microorganisms as a foundation to develop diverse and sustainable applications for bioproduct production, wastewater treatment, GHG emission reduction, energy crisis alleviation, and soil fertility enhancement. Microalgae, which are photosynthetic microorganisms that inhabit aquatic environments and exhibit a high capacity for CO2 fixation, are particularly appealing in this context. They can convert light energy and atmospheric CO2 or industrial flue gases into valuable biomass and organic chemicals, thereby contributing to GHG emission reduction. To date, most microalgae cultivation studies have focused on monoculture systems. However, maintaining a microalgae monoculture system can be challenging due to contamination by other microorganisms (e.g., yeasts, fungi, bacteria, and other microalgae species), which can lead to low productivity, culture collapse, and low-quality biomass. Co-culture systems, which produce robust microorganism consortia or communities, present a compelling strategy for addressing contamination problems. In recent years, research and development of innovative co-cultivation techniques have substantially increased. Nevertheless, many microalgae co-culturing technologies remain in the developmental phase and have yet to be scaled and commercialized. Accordingly, this review presents a thorough literature review of research conducted in the last few decades, exploring the advantages and disadvantages of microalgae co-cultivation systems that involve microalgae-bacteria, microalgae-fungi, and microalgae-microalgae/algae systems. The manuscript also addresses diverse uses of co-culture systems, and growing methods, and includes one of the most exciting research areas in co-culturing systems, which are omic studies that elucidate different interaction mechanisms among microbial communities. Finally, the manuscript discusses the economic viability, future challenges, and prospects of microalgal co-cultivation methods.

Recirculating packed-bed biofilm photobioreactor combined with membrane ultrafiltration as advanced wastewater treatment

Packed-bed biofilm photobioreactor combined with ultrafiltration membrane was investigated for intensifying the process for secondary wastewater effluent treatment. Cylindrical glass carriers were used as supporting material for the microalgal-bacterial biofilm, which developed from indigenous microbial consortium. Glass carriers allowed adequate growth of the biofilm with limited suspended biomass. Stable operation was achieved after a start-up period of 1000 h, where supernatant biopolymer clusters were minimized and complete nitrification was observed. After that time, biomass productivity was 54 ± 18 mg·L^-1·day^-1. Green microalgae Tetradesmus obliquus and several strains of heterotrophic nitrification-aerobic denitrification bacteria and fungi were identified. Combined process exhibited COD, nitrogen and phosphorus removal rates of 56 ± 5%, 12 ± 2% and 20 ± 6%, respectively. Membrane fouling was mainly caused by biofilm formation, which was not effectively mitigated by air-scouring aided backwashing.

The microalgae-based wastewater treatment system coupled with Cerium: A potential way for energy saving and microalgae boost

The microalgae-based system attracts more attention in wastewater treatment for high quality effluent, low carbon emission, and resource utilization. Light is the key factor for algae growth, but the light masking in sewage will cause low efficiency of the system. This study designed laboratory scale experiments with Chlorella to investigate the influence of cerium on the nutrient removal by algae wastewater treatment system under different light intensities. The best removal rates of NH₄-N, TP, and COD were 72.43%, 88.87%, and 68.08% under 50 µmol/(m ²·s) light intensity and 1 mg/L Ce. Low concentration of Ce could activate protein synthesis, electron transfer, and antioxidase, while excessive Ce might cause toxicity which could be relieved by strong light for energy supply and further activating superoxide dismutase (SOD) and catalase (CAT). Comparing to other similar experiences, this system reached an equal or greater performance on nutrients removal with better efficiency in light utilization. It might provide a new idea for microalgae-based system development.

Shifts in periphyton research themes over the past three decades

It has been well documented that periphyton communities play a key role in primary productivity, nutrient cycling, and food web interactions. However, a worldwide overview of research on the key themes, current situation, and major trends within the field is lacking. In this study, we applied the machine learning technique (latent Dirichlet allocation, LDA) to analyze the abstracts of 6690 publications related to periphyton from 1991 to 2020 based on the Web of Science database. The relative frequency of classical and basic research on periphyton related to colonization, biomass, growth rate, and habitats has been clearly decreasing. The increasing trends of research on periphyton are embodied in the periphyton function in freshwater ecosystems (e.g., application as ecological indicators, function in the removal of nutrients, and application in paleolimnology), the research at macroscales (e.g., spatial-temporal variation, and functional and taxonomic diversity), and the anthropogenic themes (e.g., climate warming, response to multiple stressors, and land use type). The keyword and title analysis showed that the periphyton studies are concentrated mainly on diatom aspects, especially with respect to streams relative to lakes. The thematic space based on non-metric multidimensional scaling (NMDS) showed that the classical themes such as growth rate, colonization, and environmental factors (e.g., multiple stressors and climate warming) were most linked to other research themes. We proposed that future trends in the periphyton should focus on the function of periphyton in lakes and their response to multiple environmental pressures with the increasingly extensive eutrophication in lakes and the increasingly significant change in the climate.

Microalgae bioreactor for nutrient removal and resource recovery from wastewater in the paradigm of circular economy

Every day, large quantities of wastewater are discharged from various sources that could be reused. Wastewater contains nutrients such as nitrogen or phosphorus, which can be recovered. Microalgae-based technologies have attracted attention in this sector, as they are able to bioremediate wastewater, harnessing its nutrients and generating algal biomass useful for different downstream uses, as well as having other advantages. There are multiple species of microalgae capable of growing in wastewater, achieving nutrient removal efficiencies surpassing 70%. On the other hand, microalgae contain lipids that can be extracted for energy recovery in biodiesel. Currently, there are several methods of lipid extraction from microalgae. Other biofuels can also be obtained from microalgae biomass, such as bioethanol, biohydrogen or biogas. This review also provides information on bioenergy products and products in the agri-food industry as well as in the field of human health based on microalgae biomass within the concept of circular bioeconomy.

Mechanism and performance of algal pond assisted constructed wetlands for wastewater polishing and nutrient recovery

The limitation of oxygen and carbon source restricted the TN removal in constructed wetland (CW). Algal pond (AP) could produce oxygen and fix CO₂ to improve C/N ratio in water. Therefore, an AP-CW system was established under laboratory conditions to deeply explore the effect of nutrient load distribution and microalgae addition in CWs on pollutant removal. This study showed that AP-CW could remove 49.7% TN and 90.0% TP with no carbon addition in CWs. The significant removal of NH₄-N by AP advanced the location of denitrification in CWs. To enhance TN removal, different dosage of microalgae were intermittently added at 20 and 10 cm respectively below the inlet of the vertical flow CW1 and CW2, where the rest NH₄-N has been almost oxidized into nitrate. The addition of microalgae influenced the microflora and effluent quality. Microalgae dosage in denitrification area significantly increased the absolute abundance of Σnir. The best TN removal of AP-CW could reach 91.3% when 8 g (dry weight) microalgae was added. However, unlike previous knowledge, microalgae as an organic carbon source would also release N and P during decomposition, leading to increased nutrients in the effluent. The optimal dosage of microalgae was 1 g/5 d in this study. The position and amount of microalgae addition in CWs should be adjusted based on water property and element flow to achieve the best pollutant removal and biomass harvest.

A Novel Approach for the Biological Desalination of Major Anions in Seawater Using Three Microalgal Species: A Kinetic Study

The global water shortage alert has been upgraded to a higher risk level. Consequently, a sustainable approach for ecofriendly, energy efficient water desalination is required for agricultural and municipal water reuse. In this study, an energy-efficient biological desalination process was used to treat chloride anions, which are the most abundant anion salt in seawater. Three algal species were studied: Scenedismus arcuatusa (S. arcuatusa), Chlorella vulgaris (C. vulgaris), and Spirulina maxima (Sp. maxima), under different operating conditions (saline concentrations, contact time, high light intensity, and CO2 supply), and two kinetic models were used. It was identified that under a high light intensity and CO2 supply, S. arcuatusa enhanced chloride removal from 32.42 to 48.93%; the daily bioaccumulation capacity (Qe), according to the kinetic models, was enhanced from 124 to 210 mg/g/day; and the net biomass production was enhanced from 0.02 to 0.740 g/L. The EDX analysis proved that salt bioaccumulation may be attributed to the replacement of Ca2+ and Mg2+ with Na+ and K+ through algal cells. The study’s findings provide promising data that can be used in the search for novel energy-efficient alternative ecofriendly desalination technologies based on algae biological systems with biomass byproducts that can be reused in a variety of ways.

Metagenomic Approaches to Explore the Quorum Sensing-Mediated Interactions Between Algae and Bacteria in Sequence Membrane Photo-Bioreactors

Algal–bacterial water treatment is more effective for better harvesting and promotes energy savings than other traditional treatments, while the relationships between them are multifarious. Among all the interactions, quorum sensing plays an essential ecological role. However, the relative contributions of signaling in the interaction between algae and bacteria are not clear. To elucidate the role of quorum sensing by indole-3-acetic acid (IAA) in terms of the algal–bacterial interaction during the nitrogen removal process, the bioreactors, respectively, inoculated with Chlorella, Phormidium, and both of them were started. We manifest the existence of multiple signaling-related proteins by alignment with the constructed database, and the signaling was analyzed using metagenomic sequence data obtained during bioreactor operation. We found that IAA was mainly synthetized depending on indole-3-acetamide (IAM) and indole-3-pyruvic acid (IPA) pathways by calculating the gene abundance of IAA synthetase. Both Chlorella and the co-culture reactor possessed higher nitrogen removal rate (NRR) than the Phormidium reactor, and the abundance profile of the signaling-related gene is similar with the NRR. The signaling-related gene abundance increased in Chlorella and co-culture reactors but decreased in the Phormidium reactor. Pseudomonas, Hydrogenophaga, and Zoogloea are the dominant signaled bacteria. Chlorella is the dominant signaled algae. The relative abundance of total signaled bacteria in the whole bacterial community increased during the start-up in Chlorella and co-culture reactors. According to the network analysis, phytoplankton prefers to positively correlate with signaled bacteria than non-signaled bacteria, which indicated that the signaling influences the algal–bacterial interaction. These findings hint at the significance of algal–bacterial signaling in this interkingdom interaction during nitrogen removal.

Understanding photosynthetic biofilm productivity and structure through 2D simulation

We present a spatial model describing the growth of a photosynthetic microalgae biofilm. In this 2D-model we consider photosynthesis, cell carbon accumulation, extracellular matrix excretion, and mortality. The rate of each of these mechanisms is given by kinetic laws regulated by light, nitrate, oxygen and inorganic carbon. The model is based on mixture theory and the behaviour of each component is defined on one hand by mass conservation, which takes into account biological features of the system, and on the other hand by conservation of momentum, which expresses the physical properties of the components. The model simulates the biofilm structural dynamics following an initial colonization phase. It shows that a 75 μm thick active region drives the biofilm development. We then determine the optimal harvesting period and biofilm height which maximize productivity. Finally, different harvesting patterns are tested and their effect on biofilm structure are discussed. The optimal strategy differs whether the objective is to recover the total biofilm or just the algal biomass.

Microalgae have many industrial applications, ranging from aquaculture, pharmaceutics, food industry to green energy. Planktonic cultivation of microalgae is energy-consuming. Growing them under a biofilm form is a new trend with attracting promises. Biofilms are complex heterogeneous ecosystems composed of microorganisms embedded within a self-produced extracellular matrix and stuck to a surface. Most of the studies have focused on bacterial biofilms and knowledge about microalgae biofilms is still very limited. In this paper, we propose a mathematical model describing microalgae biofilm development. We simulate in 1D and 2D the impact of harvesting conditions on biofilm productivity. In agreement with available experimental observations, we find that there exist optimal frequencies and patterns that optimize the productivity. We also show that the optimal conditions differ whether for maximizing the productivity of microalgae or of the whole biofilm.

Bioremediation of phenolic pollutants by algae - current status and challenges

Industrial production processes, especially petroleum processing, will produce high concentration phenolic wastewater. Traditional wastewater treatment technology is costly and may lead to secondary pollution. In order to avoid the adverse effects of incompletely treated phenolics, more advanced methods are required. Algae bioremediate phenolics through green pathways such as adsorption, bioaccumulation, biodegradation, and photodegradation. At the same time, the natural carbon fixation capacity of algae and its potential to produce high-value products make algal wastewater treatment technology economically feasible. This paper reviews the environmental impact of several types of phenolic pollutants in wastewater and different strategies to improve bioremediation efficiency. This paper focuses on the progress of algae removing phenols by different mechanisms and the potential of algae biomass for further biofuel production. This technology holds great promise, but more research on practical wastewater treatment at an industrial scale is needed in the future.

Effective treatment of aquaculture wastewater with mussel/microalgae/bacteria complex ecosystem: a pilot study

The discharge of aquaculture wastewater increased significantly in China. Especially, high content of nitrogen and phosphorus in wastewater could destroy the receiving water environment. To reduce the pollution of aquaculture wastewater, farmed triangle sail mussel (Hyriopsis cumingii) was proposed to be cultivated in the river. This was the first time that bacteria (Bacillus subtilis and Bacillus licheniformis) and microalgae (Chlorella vulgaris) were also used and complemented ecosystem functions. The pollutants in wastewater were assimilated by Chlorella vulgaris biomass, which was then removed through continuous filter-feeding of Hyriopsis cumingii. While, Bacillus subtilis and Bacillus licheniformis enhanced the digestive enzyme activities of mussel. It demonstrated that approximately 4 mussels/m³ was the optimal breeding density. Under such condition, orthogonal experiment indicated that the dose of Bacillus subtilis, Bacillus licheniformis, and Chlorella vulgaris should be 0.5, 1, and 2 mL respectively. Compared with mussel, mussel/microalgae, mussel/bacteria system, treatment ability of the mussel/microalgae/bacteria system in batch experiment was better, and 94.67% of NH₃-N, 92.89% of TP and 77.78% of COD were reduced after reaction for 6 days. Finally, 90 thousand mussels per hectare of water were cultivated in Kulv river in China, and the field experiment showed that water quality was significantly improved. After about 35 days of operation, NH₃-N, TN, TP and COD concentration were maintained around 0.3, 0.8, 0.3, and 30 mg/L respectively. Therefore, the mussel/microalgae /bacteria system in this study showed a sustainable and efficient characteristic of aquaculture wastewater bioremediation.

Industrial lignins: the potential for efficient removal of Cr(VI) from wastewater

Cr(VI), a serious threat to human health, widely exists in the effluents of various industrial processes. In this paper, the potential of industrial lignin for efficient removal of Cr(VI) from wastewater was systematically investigated, including pulping black liquor lignin (BLN), enzymolysis lignin (ELN), and SPORL pretreatment spent liquor (FS). The structure characterizations of three lignins were investigated by thermogravimetry (TG), Fourier transform infrared (FTIR) spectroscopy, Brunauer-Emmett-Teller (BET) surface area measurement, scanning electron microscope (SEM), and X-ray photoelectron spectroscopy (XPS). Among these three lignins, BLN showed the highest adsorption amount of Cr(VI) and good selectivity in wastewater simulation. According to the Langmuir model, the calculated maximum adsorption amount of Cr(VI) on ELN, BLN, and FS was 801.57, 864.30, and 642.26 mg g^-1, respectively. The adsorption of Cr(VI) by industrial lignins was a chemisorption process, during which Cr(VI) was reduced to low-toxic Cr(III). This paper provided a promising application for the effective utilization of industrial lignins.

Probing Antimicrobial Halloysite/Biopolymer Composites with Electron Microscopy: Advantages and Limitations

Halloysite is a tubular clay nanomaterial of the kaolin group with a characteristic feature of oppositely charged outer and inner surfaces, allowing its selective spatial modification. The natural origin and specific properties of halloysite make it a potent material for inclusion in biopolymer composites with polysaccharides, nucleic acids and proteins. The applications of halloysite/biopolymer composites range from drug delivery and tissue engineering to food packaging and the creation of stable enzyme-based catalysts. Another important application field for the halloysite complexes with biopolymers is surface coatings resistant to formation of microbial biofilms (elaborated communities of various microorganisms attached to biotic or abiotic surfaces and embedded in an extracellular polymeric matrix). Within biofilms, the microorganisms are protected from the action of antibiotics, engendering the problem of hard-to-treat recurrent infectious diseases. The clay/biopolymer composites can be characterized by a number of methods, including dynamic light scattering, thermo gravimetric analysis, Fourier-transform infrared spectroscopy as well as a range of microscopic techniques. However, most of the above methods provide general information about a bulk sample. In contrast, the combination of electron microscopy with energy-dispersive X-ray spectroscopy allows assessment of the appearance and composition of biopolymeric coatings on individual nanotubes or the distribution of the nanotubes in biopolymeric matrices. In this review, recent contributions of electron microscopy to the studies of halloysite/biopolymer composites are reviewed along with the challenges and perspectives in the field.

A Review of Microalgal Biofilm Technologies: Definition, Applications, Settings and Analysis

Biofilm-based algal cultivation has many advantages over the conventional suspended growth methods and has received increased attention as a potential platform for algal production, wastewater treatment (nutrient removal), and a potential pathway to supply feedstock for microalgae-based biorefinery attempts. However, the attached cultivation by definition and application is a result of a complex interaction between the biotic and abiotic components involved. Therefore, the entire understanding of the biofilm nature is still a research challenge due to the need for real-time analysis of the system. In this review, the state of the art of biofilm definition, its life cycle, the proposed designs of bioreactors, screening of carrier materials, and non-destructive techniques for the study of biofilm formation and performance are summarized. Perspectives for future research needs are also discussed to provide a primary reference for the further development of microalgal biofilm systems.

Wastewater treatment by microalgae

The growth of the world's population increases the demand for fresh water, food, energy, and technology, which in turn leads to increasing amount of wastewater, produced both by domestic and industrial sources. These different wastewaters contain a wide variety of organic and inorganic compounds which can cause tremendous environmental problems if released untreated. Traditional treatment systems are usually expensive, energy demanding and are often still incapable of solving all challenges presented by the produced wastewaters. Microalgae are promising candidates for wastewater reclamation as they are capable of reducing the amount of nitrogen and phosphate as well as other toxic compounds including heavy metals or pharmaceuticals. Compared to the traditional systems, photosynthetic microalgae require less energy input since they use sunlight as their energy source, and at the same time lower the carbon footprint of the overall reclamation process. This mini-review focuses on recent advances in wastewater reclamation using microalgae. The most common microalgal strains used for this purpose are described as well as the challenges of using wastewater from different origins. We also describe the impact of climate with a particular focus on a Nordic climate.

Bacterial-algae biofilm enhance MABR adapting a wider COD/N ratios wastewater: Performance and mechanism

Although membrane aerated biofilm reactor (MABR) is promising in nitrogen removal due to its counter-diffusion biofilms structure, it still cannot adapt a wider COD/N ratios wastewater. In this condition, expanding the MABR applicability range in different COD/N ratio wastewater is necessary. In this study, a bacterial-algae biofilm, instead of bacteria biofilm, supporting membrane aerated biofilm reactor (MABAR) was constructed, and the performance was compared to MABR. Results showed that the total nitrogen (TN) removal efficiency was promoted significantly in MABAR regardless of the COD/N ratio. Compared to MABR, effluent TN concentration in COD/N ratio of 2, 5, and 8 declined by 14.34 mg/L, 0.50 mg/L, and 12.10 mg/L, respectively. Nitrification inhibition test suggested that algae assimilation made an obvious contribution (at least 18.18 mg/L) to the NH₄⁺-N removal in MABAR. Besides, redundancy analysis (RDA) indicates that MABAR has a negative correlation with Nitrospirae but is positively correlated with NH₄⁺-N removal load. These results are consistent with the kinetics result that algae assimilation, instead of nitrification-denitrification, is responsible for the nitrogen removal in MABAR. Therefore, the change of nitrogen removal route further gave MABAR excellent adaptability and impact resistance to address wastewater with different COD/N ratios, which is conducive to its wide application.

Feasibility and comparative analysis of cadmium biosorption by living scenedesmus obliquus FACHB-12 biofilms

Microalgal biofilm has been recognized as a cost-effective biorsorbent for heavy metal and a promising method for microalgae-water separation. In this study, living suspended Scenedesmus obliquus FACHB-12 (isolated from southern China) and its biofilm with different carriers were investigated to remove cadmium from aqueous solution. S. obliquus FACHB-12 biofilm with luffa sponge carrier showed highest cadmium removal efficiency at 92.7% compared to biofilm with K3 carrier (75.3%) and significantly higher than suspended S. obliquus FACHB-12 (61.8%) in 2 h experiment with initial Cd²⁺ concentration at 3.0 mg/L at pH = 6.0 with 0.8 g/L of biomass under room temperature. S. obliquus FACHB-12 biofilm with K3 and luffa sponge carrier also demonstrated higher tolerance towards increased Cd²⁺ concentration with highest biosorption efficiency at 85.1% and 90.35% respectively under 20 mg/L of Cd²⁺, while suspended S. obliquus FACHB-12 biosorption efficiency achieved 81.4% under 10 mg/L of Cd²⁺ and started to decline over increased cadmium concentration. The adsorption kinetics for all experimental groups followed the pseudo-second-order adsorption model, with biosorption equilibrium favored in Langmuir isotherm. The maximum biosorption capacity estimated by Langmuir isotherm reached 133.14 mg/g biomass in S. obliquus FACHB-12 biofilm with luffa sponge carrier, followed by 78.76 mg/g with K3 carrier, and 60.03 mg/g with suspended S. obliquus FACHB-12. Results suggest an efficient, inexpensive microalgal biofilm with biological carrier system could enhance high cadmium removal for advanced wastewater treatment and provide a cost-effective method for microalgae harvesting process.

Modeling and improving arrayed microalgal biofilm attached culture system

A microalgal biofilm-attached-system is an alternative cultivation method, that offers potential advantages of improved biomass productivity, efficient harvesting, and water saving. These biofilm systems have been widely tested and utilized for microalgal biomass production and wastewater treatment. This research a microalgal growth model for the biofilm attached culture system has been developed and experimentally validated, both, in single and arrayed biofilm systems. It has been shown that the model has the capability to accurately describe microalgae growth. Moreover, via the model simulation, it was observed that system structural parameters, light dilution rate, and light intensity significantly affected the culture performance. The limitations, and improvement aspects of the model, are also discussed in this study. To our knowledge, this is the first time that a mathematical model for an arrayed-biofilm-attached-system has been developed and validated. This model will certainly be helpful in the design, improvement, optimization, and evaluation of the biofilm-attached-systems.

Combining SIMS and mechanistic modelling to reveal nutrient kinetics in an algal-bacterial mutualism

Microbial communities are of considerable significance for biogeochemical processes, for the health of both animals and plants, and for biotechnological purposes. A key feature of microbial interactions is the exchange of nutrients between cells. Isotope labelling followed by analysis with secondary ion mass spectrometry (SIMS) can identify nutrient fluxes and heterogeneity of substrate utilisation on a single cell level. Here we present a novel approach that combines SIMS experiments with mechanistic modelling to reveal otherwise inaccessible nutrient kinetics. The method is applied to study the onset of a synthetic mutualistic partnership between a vitamin B₁₂-dependent mutant of the alga Chlamydomonas reinhardtii and the B₁₂-producing, heterotrophic bacterium Mesorhizobium japonicum, which is supported by algal photosynthesis. Results suggest that an initial pool of fixed carbon delays the onset of mutualistic cross-feeding; significantly, our approach allows the first quantification of this expected delay. Our method is widely applicable to other microbial systems, and will contribute to furthering a mechanistic understanding of microbial interactions.

Algae Biofilm Reduces Microbe-Derived Dissolved Organic Nitrogen Discharges: Performance and Mechanisms

Microbe-derived dissolved organic nitrogen (mDON) can readily induce harmful phytoplankton blooms, and thus, restricting its discharges is necessary. Recently, algae biofilm (AB) has attracted increasing interest for its advantages in nutrient recovery. However, its features in mDON control remain unexplored. Herein, AB's mDON formation and utilization performance, molecular characteristics, and metabolic traits have been investigated, with activated sludge (AS) as the benchmark for comparisons. Comparatively, AB reduced mDON formation by 83% when fed with DON-free wastewater. When fed with AS's effluent, it consumed at least 72% of the exogenous mDON and notably reduced the amount of protein/amino sugar-like compounds. Irrespective of the influent, AB ultimately produced more various unsaturated hydrocarbon and lignin analogues. Redundancy and network analysis highlighted the algal-bacterial synergistic effects exemplified by cross-feeding in reducing mDON concentrations and shaping mDON pools. Moreover, metagenomics-based metabolic reconstruction revealed that cyanobacteria Limnothrix and Kamptonema spp. facilitated mDON uptake, ammonification, and recycling, which supplied the extensive nitrogen assimilatory demand for amino acids, vitamins, and cofactors biosynthesis, and therefore promoted mDON scavenging. Our findings demonstrate that regardless of the secondary or tertiary process, cyanobacteria-dominated AB is promising to minimize bioavailable mDON discharges, which has implications for future eutrophication control.

Ecological and Industrial Implications of Dynamic Seaweed-Associated Microbiota Interactions

Seaweeds are broadly distributed and represent an important source of secondary metabolites (e.g., halogenated compounds, polyphenols) eliciting various pharmacological activities and playing a relevant ecological role in the anti-epibiosis. Importantly, host (as known as basibiont such as algae)–microbe (as known as epibiont such as bacteria) interaction (as known as halobiont) is a driving force for coevolution in the marine environment. Nevertheless, halobionts may be fundamental (harmless) or detrimental (harmful) to the functioning of the host. In addition to biotic factors, abiotic factors (e.g., pH, salinity, temperature, nutrients) regulate halobionts. Spatiotemporal and functional exploration of such dynamic interactions appear crucial. Indeed, environmental stress in a constantly changing ocean may disturb complex mutualistic relations, through mechanisms involving host chemical defense strategies (e.g., secretion of secondary metabolites and antifouling chemicals by quorum sensing). It is worth mentioning that many of bioactive compounds, such as terpenoids, previously attributed to macroalgae are in fact produced or metabolized by their associated microorganisms (e.g., bacteria, fungi, viruses, parasites). Eventually, recent metagenomics analyses suggest that microbes may have acquired seaweed associated genes because of increased seaweed in diets. This article retrospectively reviews pertinent studies on the spatiotemporal and functional seaweed-associated microbiota interactions which can lead to the production of bioactive compounds with high antifouling, theranostic, and biotechnological potential.

Nighttime aeration mode enhanced the microalgae-bacteria symbiosis (ABS) system stability and pollutants removal efficiencies

Utilizing external aeration to enhance the performance of microalgae-bacteria symbiosis (ABS) system has been extensively studied. However, inappropriate aeration damaged ABS system stability. A nighttime aeration mode (NA-ABS) in different aeration intensities (20, 50, 100 mL/min) was adopted to compare to continuous aeration microalgae-bacteria symbiosis (CA-ABS) mode and no-aerated mode on pollutants removal efficiencies and system stability. Results showed that NA-ABS system performed better on total organic carbon (TOC), NH₄⁺-N, total nitrogen (TN) and PO₄^3- removal than CA-ABS system, especially under the aeration intensity of 20 mL/min (NAI20), with the removal efficiencies of 96.59%, 99.18%, 90.30% and 89.16%, respectively. These results were because NA-ABS system prevented CO₂ stripping and provided more dissolved inorganic carbon (DIC) for the microalgae growth. Furthermore, less CO₂ stripping released the competition between microalgae and autotrophic bacteria for the DIC, leading to a more stable ABS system during long-term operation. This paper suggested that NA-ABS system would provide some new insights into ABS system and be helpful for further study.

Application of purple phototrophic bacteria in a biofilm photobioreactor for single cell protein production: Biofilm vs suspended growth

Single cell protein (SCP), has been proposed as alternative to effectively upgrade and recycle organics and nutrients from wastewater. Biomass recovery is a critical issue, and recovery as a biofilm is effective in comparison with sedimentation of suspended biomass. This study aims to determine the applicability of purple phototrophic bacteria (PPB) biofilm on infra-red irradiated, submerged surfaces for the treatment of pre-settled red meat processing wastewater, and SCP generation. PPB removed up to 66% of COD and 42% of TN and TP during batch operation with total areal productivities between 15 and 20 gVS m^-2 d^-1 achieved. More than 60% of the total biomass grew attached (as biofilm) with the remainder being suspended. The biofilm can be harvested at around 160 gTS L^-1 with high protein (>96 g L^-1) and low ash contents (>4.0% compared to >30% in the wastewater). The compositions of attached and suspended biomass differed significantly, where the suspended fraction resembled the wastewater composition (e.g. in terms of inert components). The PPB community was similar in the suspended and biofilm fractions while the biofilm had higher relative abundance of PPB representatives (57% vs 43%). A consistent product composition is highly relevant for the manufacturer and ultimately determines the value as feed, feed additive, or supplement.

Perspectives on Microalgal Biofilm Systems with Respect to Integration into Wastewater Treatment Technologies and Phosphorus Scarcity

Phosphorus is one of the non-renewable natural resources. High concentration of phosphorus in surface water leads to undesirable eutrophication of the water ecosystem. It is therefore necessary to develop new technologies not only for capturing phosphorus from wastewater but also for phosphorus recovery. The aim of the study was to propose three different integration scenarios for a microalgal biofilm system for phosphorus removal in medium and small wastewater treatment plants, including a comparison of area requirements, a crucial factor in practical application of microalgal biofilm systems. The area requirements of a microalgal biofilm system range from 2.3 to 3.2 m2 per person equivalent. The total phosphorus uptake seems to be feasible for construction and integration of microalgal biofilm systems into small wastewater treatment plants. Application of a microalgal biofilm for phosphorus recovery can be considered one of the more promising technologies related to capturing CO2 and releasing of O2 into the atmosphere.

A Novel System for Real-Time, In Situ Monitoring of CO2 Sequestration in Photoautotrophic Biofilms

Climate change brought about by anthropogenic CO₂ emissions has created a critical need for effective CO₂ management solutions. Microalgae are well suited to contribute to efforts aimed at addressing this challenge, given their ability to rapidly sequester CO₂ coupled with the commercial value of their biomass. Recently, microalgal biofilms have garnered significant attention over the more conventional suspended algal growth systems, since they allow for easier and cheaper biomass harvesting, among other key benefits. However, the path to cost-effectiveness and scaling up is hindered by a need for new tools and methodologies which can help evaluate, and in turn optimize, algal biofilm growth. Presented here is a novel system which facilitates the real-time in situ monitoring of algal biofilm CO₂ sequestration. Utilizing a CO₂-permeable membrane and a tube-within-a-tube design, the CO₂ sequestration monitoring system (CSMS) was able to reliably detect slight changes in algal biofilm CO₂ uptake brought about by light–dark cycling, light intensity shifts, and varying amounts of phototrophic biomass. This work presents an approach to advance our understanding of carbon flux in algal biofilms, and a base for potentially useful innovations to optimize, and eventually realize, algae biofilm-based CO₂ sequestration.

Simultaneous removal of nutrient and sulfonamides from marine aquaculture wastewater by concentrated and attached cultivation of Chlorella vulgaris in an algal biofilm membrane photobioreactor (BF-MPBR)

Microalgae based wastewater treatment has attracted increasing attention for its many advantages in recent years. In this study, a novel microalgae biofilm membrane photobioreactor (BF-MPBR) was developed for the efficient microalgae cultivation and the removal of nutrient and sulfonamides (SAs) from marine aquaculture wastewater. Two BF-MPBRs with hydraulic retention time (HRT) of 1 day and 2 days respectively were continuously operated for 70 days without harvesting microalgae. Concentrated and attached culture of marine Chlorella vulgaris was achieved in these continuous flow BF-MPBRs due to the suspended solid carriers and microfiltration membrane module in the reactors. The algal biomass productivity achieved in BF-MPBRs with HRT of 1 day and 2 days were 14.02 and 22.03 mg L^-1 day^-1, respectively. In addition, at the end of the cultivation, 60.4% and 45.0% of microalgae were fixed into algal biofilm in BF-MPBRs with 1 day and 2 day HRT, respectively. Compared with batch cultivation, more efficient nutrient and SAs removal performance was achieved in BF-MPBRs, although the HRT of the BF-MPBRs used in this study was only 1 or 2 days. During the stable operation stage of the BF-MPBRs, the reduction in dissolved inorganic nitrogen (DIN), dissolved inorganic phosphorus (DIP), sulfadiazine (SDZ), sulfamethazine (SMZ) and sulfamethoxazole (SMX) were found in the range of 91.0-99.6%, 92.1-98.4%, 61.0-79.2%, 50.0-76.7% and 60.8-82.1%, respectively. Therefore, nutrient and SAs were simultaneously and efficiently removed from marine aquaculture wastewater by microalgae cultivation in BF-MPBR.

Effects of microplastic biofilms on nutrient cycling in simulated freshwater systems

Microplastic surfaces could be colonized by microorganisms and form biofilms in aquatic ecosystem, which can participate in the nitrogen (N) and phosphorus (P) cycles. In this work, polypropylene squares were deployed in a pond for 30 days for microplastic biofilms colonization and then were transported to indoor microcosms at an environmental relevant level to study their effects on N and P cycling. Results showed that microplastic biofilms could accelerate ammonia and nitrite oxidation as well as denitrification. Presence of microplastic biofilms accumulated P temporarily and increased alkaline phosphatase activities (APA) in the system. Later in the experiment, disintegration of matured biofilms released N and P into the water. Mass balance calculation suggested possible N input caused by biological nitrogen fixation. Our results demonstrated that microplastics associated biofilms have the ability to alter the N and P cycling processes in aquatic system. However, additional works are required to further quantify the extent of such impact.