Highly efficient removal of diazinon pesticide from aqueous solutions by using coconut shell-modified biochar

Agricultural biomass/waste-based materials could be a potential adsorption-type remediation contributor to environmental pollution induced by pesticides-A critical review

The widespread use of pesticides that are inevitable to keep the production of food grains brings serious environmental pollution problems. Turning agricultural biomass/wastes into materials addressing the issues of pesticide contaminants is a feasible strategy to realize the reuse of wastes. Several works summarized the current applications of agricultural biomass/waste materials in the remediation of environmental pollutants. However, few studies systematically take the pesticides as an unitary target pollutant. This critical review comprehensively described the remediation effects of crop-derived waste (cereal crops, cash crops) and animal-derived waste materials on pesticide pollution. Adsorption is considered a superior and highlighted effect between pesticides and materials. The review generalized the sources, preparation, characterization, condition optimization, removal efficiency and influencing factors analysis of agricultural biomass/waste materials. Our work mainly emphasized the promising results in lab experiments, which helps to clarify the current application status of these materials in the field of pesticide remediation. In the meantime, rigorous pros and cons of the materials guide to understand the research trends more comprehensively. Overall, we hope to achieve a large-scale use of agricultural biomass/wastes.

Synergistic effect of adsorption and photolysis on methylene blue removal by magnetic biochar derived from lignocellulosic biomass

In this study, magnetic biochar was synthesized by doping Fe3O4 onto the biochar surface followed by analysis of its properties. The efficiency of methylene blue (MB) removal through the combined processes of adsorption and photolysis was assessed. The presence of Fe3O4 on the biochar surface was confirmed using Raman spectroscopy and X-ray photoelectron spectroscopy. The magnetic biochar, after MB adsorption, showed a magnetism of 39.50 emu/g leading to a 97.07 % recovery rate. The specific surface area of biochar was higher (380.68 m2/g) than that of magnetic biochar (234.46 m2/g), and the maximum adsorption capacity of MB was higher in the biochar (0.03 mg/g) than that in magnetic biochar (0.02 mg/g) under the optimal conditions for MB adsorption. The MB adsorption experiments using biochar or magnetic biochar were optimally conducted under 10-20 mg/L MB concentration, 1 g biochar dosage, pH 12, 200 rpm rotation speed, 25 °C temperature, and 30 min duration. Under dark conditions, biochar had a higher MB removal rate, at 83.91 %, compared to magnetic biochar, at 78.30 %. Under visible light (λ > 425 nm), magnetic biochar effectively removed MB within 10 min, highlighting the synergistic effect of adsorption and photolysis. MB is physically and chemically adsorbed by the monolayer on the surface of EB and EMB according to adsorption behavior.

Bio-derived carbon-based materials for sustainable environmental remediation and wastewater treatment

Biosynthesized nanocomposites, particularly those incorporating carbon-based materials, exhibit exceptional tunability and multifunctionality, surpassing the capabilities of conventional materials in these aspects. Developing practical solutions is critical to address environmental toxins from pharmaceuticals, heavy metals, pesticides, and dyes. Biomass waste is a readily available carbon source, which emerges as a promising material for producing biochar due to its inherent advantages: abundance, low cost, and environmentally friendly nature. This distribution mainly uses carbon-based materials (CBMs) and biomass waste in wastewater treatment. This review paper investigates several CBM types, including carbon aerogels, nanotubes, graphene, and activated carbon. The development of bio-derived carbon-based nanomaterials are discussed, along with the properties and composition of carbon materials derived from biomass waste and various cycles, such as photodegradation, adsorption, and high-level oxidation processes for natural remediation. In conclusion, this review examines the challenges associated with biochar utilization, including cost, recovery, and practical implementation.

Accumulation and ecological risk assessment of diazinon in surface sediments of Baiyangdian lake and its potential impact on probiotics and pathogens

Diazinon is an organophosphorus pesticide widely used in agriculture and household pest control, and its use also poses several environmental and health hazards. In this study, we investigated the spatial and temporal distribution of diazinon in Baiyangdian, evaluated its potential ecological risk and toxicity to aquatic organisms based on RQ (Risk quotient) and TU (Toxic unit) analysis, and assessed the potential effects of diazinon accumulation on probiotics and pathogens based on statistical analysis of high-throughput sequencing data. The results showed that diazinon in Baiyangdian posed a low to moderate chronic risk to sediment-dwelling organisms and a low toxicity effect on aquatic invertebrates, which was mainly concentrated in October and human-intensive areas. Meanwhile, increases in sediment electrical conductivity (EC), amorphous iron oxides content and phenol oxidase activity favored diazinon accumulation in sediments, whereas the opposite was the case for sediment organic carbon, β-1,4-glucosidase, phosphatase, catalase and pH, suggesting that environmental indicators play a key role in the behavior and distribution of diazinon. In addition, diazinon in heavily contaminated areas seem to inhibit the rare probiotics (Bifidobacterium adolescentis and Serratia sp.), while promoted dominant pathogens (e.g., Burkholderia cenocepacia), which can lead to increased disease risk to humans and ecosystems, disruption of ecological balance and potential health problems. However, probiotic Streptomyces xiamenensis resist to diazinon would be a potential degrader for diazinon remove. In conclusion, this study unveiled the effects of diazinon pollution on wetland ecosystems, emphasizing ecological impacts and potential health concerns. In addition, the discovery of diazinon resistant probiotics provided new insights into wetland ecological restoration.

Adsorptive removal of anthracene from water by biochar derived amphiphilic carbon dots decorated with chitosan

Anthracene belongs to the polycyclic aromatic hydrocarbon (PAH) consisting of benzene rings, unusually highly stable through more π-electrons and localized π-bond in entire rings. Aqueous-phase anthracene adsorption using carbon-based materials such as biochar is ineffective. In this paper, carbon dots (CDs) derived from the acid treatment of coconut shell biochar (CDs/MCSB) decorated with chitosan (CS) are successfully synthesized and applied for anthracene removal from aqueous solutions. The h-CDs/MCSB exhibited fast adsorption of anthracene with significant sorption capacity (Qmax = 49.26 mg g-1) with 95 % removal efficiency at 60 min. The study suggested chemisorption dominated monolayer anthracene adsorption onto h-CDs/MCSB, where a significant role was played by ion-exchange. Density Functional Theory (DFT) suggested the anthracene adsorption was dominated by the electrostatic interactions and delocalized electron, induced by higher polarizability of functional groups on the surface of hybrid CDs/MCSB assisted by chitosan (h-CDs/MCSB). In addition, the aromatic structure of CDs/MCSB and high polarizability of functional groups provided the strong interactions between benzene rings of anthracene and hybrid adsorbent-assisted multiple π-bond through delocalized π-bond and polarization-induced H-bond interactions. The presence of carboxylic and sulfonic groups on the CDs/MCSB surface also contributed to the effective adsorption of anthracene was confirmed by the fluorescence spectra. The results showed that the hybrid adsorbent was an effective material for removing PAHs, usually difficult to remove from water owing to the presence of benzene rings in their structures. Further, consistency in the DFT results suggested the outstanding binding capacity with the anthracene molecules with h-CDs/MCSB.

A Sustainable Banana Peel Activated Carbon for Removing Pharmaceutical Pollutants from Different Waters: Production, Characterization, and Application

Due to the growing concerns about pharmaceutical contamination and its devastating impact on the economy and the health of humans and the environment, developing efficient approaches for removing such contaminants has become essential. Adsorption is a cost-effective technique for removing pollutants. Thus, in this work, banana peels as agro-industrial waste were utilized for synthesizing activated carbon for removing pharmaceuticals, namely amoxicillin and carbamazepine from different water matrices. The chemically activated carbon by phosphoric acid (H3PO4) was carbonized at temperatures 350 °C, 450 °C and 550 °C. The material was characterized by several techniques such as scanning electron microscopy with energy dispersive X-ray spectroscopy (SEM-EDS), Fourier transform infrared spectroscopy (FTIR), Boehm titration, point of zero charge (pHPZC), BET surface area (SBET), the proximate and ultimate analyses, X-ray powder diffraction (XRD), and thermos-gravimetric analysis (TGA). The SEM of banana peel activated carbon (BPAC) depicted a semi-regular and heterogeneous morphology, characterized by an abundance of pores with diverse forms and sizes. Boehm titration revealed an increase in the amounts of acidic groups by 0.711 mmol/g due to activation by H3PO4. FTIR recorded different peaks suggesting significant modifications in the spectroscopic characteristics of the BPAC surface due to the successful activation and adsorption of the pollutant molecules. The pHpzc of BPAC was calculated to be 5.005. The SBET surface area dramatically increased to 911.59 m2/g after the activation. The optimum conditions were 25 °C, a materials dosage of 1.2 g/L, a saturation time of 120 min, a pollutants mixture of 25 mg/L, and a pH of 5. Langmuir exhibits a slightly better fit than Freundlich with a low value of the residual sum of squares (SSE) and the data were better fitted to the pseudo-second-order kinetic. Furthermore, the efficacy of BPAC in eliminating pharmaceuticals from Milli Q water, lake water, and wastewater was successfully investigated over the seven cycles. The results of the present work highlighted a potential usage of agro-industrial waste in eliminating organic micropollutants while exhibiting sustainable management of this waste.

Agrowaste-generated biochar for the sustainable remediation of refractory pollutants

The rapid growth of various industries has led to a significant, alarming increase in recalcitrant pollutants in the environment. Hazardous dyes, heavy metals, pesticides, pharmaceutical products, and other associated polycyclic aromatic hydrocarbons (such as acenaphthene, fluorene, fluoranthene, phenanthrene, and pyrene) have posed a significant threat to the surroundings due to their refractory nature. Although activated carbon has been reported to be an adsorbent for removing contaminants from wastewater, it has its limitations. Hence, this review provides an elaborate account of converting agricultural waste into biochar with nanotextured surfaces that can serve as low-cost adsorbents with promising pollutant-removing properties. A detailed mechanism rationalized that this strategy involves the conversion of agrowaste to promising adsorbents that can be reduced, reused, and recycled. The potential of biowaste-derived biochar can be exploited for developing biofuel for renewable energy and also for improving soil fertility. This strategy can provide a solution to control greenhouse gas emissions by preventing the open burning of agricultural residues in fields. Furthermore, this serves a dual purpose for environmental remediation as well as effective management of agricultural waste rich in both organic and inorganic components that are generated during various agricultural operations. In this manner, this review provides recent advances in the use of agrowaste-generated biochar for cleaning the environment.

Alleviate environmental concerns with biochar as a container substrate: a review

Peat moss has desirable properties as a container substrate, however, harvesting it from peatland for greenhouse/nursery production use has disturbed peatland ecosystem and caused numerous environmental concerns. More recently, many nations have taken actions to reduce or ban peat moss production to reach the carbon neutral goal and address the environmental concerns. Also, the overuse of fertilizers and pesticides with peat moss in greenhouse/nursery production adds extra environmental and economic issues. Thus, it is urgent to find a peat moss replacement as a container substrate for greenhouse/nursery production. Biochar, a carbon-rich material with porous structure produced by the thermo-chemical decomposition of biomass in an oxygen-limited or oxygen-depleted atmosphere, has drawn researchers' attention for the past two decades. Using biochar to replace peat moss as a container substrate for greenhouse/nursery production could provide environmental and economic benefits. Biochar could be derived from various feedstocks that are regenerated faster than peat moss, and biochar possesses price advantages over peat moss when local feedstock is available. Certain types of biochar can provide nutrients, accelerate nutrient adsorption, and suppress certain pathogens, which end up with reduced fertilizer and pesticide usage and leaching. However, among the 36,474 publications on biochar, 1,457 focused on using biochar as a container substrate, and only 68 were used to replace peat moss as a container substrate component. This study provides a review for the environmental and economic concerns associated with peat moss and discussed using biochar as a peat moss alternative to alleviate these concerns.

Biochar Derived from Pineapple Leaf Non-Fibrous Materials and Its Adsorption Capability for Pesticides

Non-fibrous materials (NFMs) are typically discarded during pineapple leaf fiber processing. The underutilized NFM waste was proposed for use in this work as a raw material for the production of biochar . The removal of pesticides (acetamiprid, imidacloprid, or methomyl) from water was then investigated using the NFM derived biochar (NFMBC). The pseudo-second-order kinetic data suggested chemisorption of pesticide on NFMBC. While acetamiprid or imidacloprid adsorption on NFMBC occurred primarily via multi-layered adsorption (best fitted with the Freundlich isotherms), the Sips adsorption isotherms matched with the experimental data, implying heterogeneous adsorption of methomyl on the biochar surface. The adsorption capacities for acetamiprid, methomyl, and imidacloprid are 82.18, 36.16, and 28.98 mg g^-1, respectively, which are in agreement with the order of the polarity (low to high) of pesticides. Adsorption capacities indicated that the NFMBC preferably removed low-polarity pesticides from water sources. Since pineapple leaves provide fibers and NFMs for materials development, this study should promote an extended agro-waste utilization approach and full-cycle resource management in pineapple fields.

A comprehensive review of coconut-based porous materials for wastewater treatment and CO2 capture

For several decades, water pollution has become a major threat to aquatic and non-aquatic species, including humans. Different treatment techniques have already been proposed and implemented depending on wastewater characteristics. But many of these treatment techniques are expensive and inefficient. Adsorption-based techniques have shown impressive performances as an inexpensive treatment method previously. Coconut-based resources have been considered as adsorbents for wastewater treatment because of their abundance, low cost, and favorable surface properties. However, over the last decade, no comprehensive study has been published regarding biochar from coconut-based materials for wastewater treatment and CO2 capture. This review discusses biochar production technology for coconut-based materials, its modification and characterization, its utilization as an adsorbent for removing metals and organics from wastewater, and the associated removal mechanisms and the economic aspects of coconut-based biochar. Coconut-based materials are cheap and effective for removing various organic compounds such as pesticides, hormones, phenol, and phenolic compounds from solutions and capturing CO2 from air mainly through the pore-filling mechanism. Utilizing coconut-based biochars in a hybrid system that combines adsorption and other techniques, such as biotechnology or chemical coagulation is a promising way to increase their performance as an adsorbent in wastewater treatment.

Coconut shell biochar application in liquid-solid microextraction of triazine herbicides from multi-media environmental samples

A rapid, fast, widely applicable liquid-solid microextraction and purification method of triazine herbicides (TRZHs) in muti-media samples using salting-out assisted liquid-liquid extraction (SALLE) combined with self-assembled monolithic spin columns-solid phase micro extraction (MSC-SPME) was developed. Environmentally friendly coconut shell biochar (CSB) was used as the adsorbents of MSC-SPME. Ultra-high performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was the separation and determination method. The adsorption kinetics and isotherms were investigated to indicate the interaction between CSB and TRZHs. Several parameters influencing the liquid-solid microextraction efficiency, such as sample pH, salting-out solution volume and pH, sample loading speed, elution speed, elution ratio and volume of eluent were systematically investigated with the aid of orthogonal design. The whole extraction process was operated within 10 min. Under the optimum extraction and determination conditions, good linearities for three TRZHs were obtained in a range of 0.10-200.00 ng mL^-1, with linear coefficients (R²) greater than 0.999. The limits of detection (LODs) and limits of quantification (LOQs) were in the range of 6.99-11.00 ng L^-1 and 23.33-36.68 ng L^-1, respectively. The recoveries of the three TRZHs in multi-media environmental samples were ranged from 69.00% to 124.72%, with relative standard deviations (RSDs) lower than 0.43%. This SALLE-MSC-SPME-UPLC-MS/MS method was successfully applied to the determination of TRZHs in environmental and food samples and exhibited the advantages of high efficiency and sensitivity, low cost, and environmental friendliness. Compared with the methods published before, CSB-MSC was green, rapid, easy-operated, and reduced the whole cost of the experiment; SALLE combined MSC-SPME eliminated the matrix references effectively; what's more, the SALLE-MSC-SPME-UPLC-MS/MS method could be applied to various sample without complicated sample pretreatment procedure.

A chemiluminescence biosensor based on the peroxidase-like property of molybdenum disulfide/zirconium metal-organic framework nanocomposite for diazinon monitoring

BACKGROUND

Organophosphorus pesticides are widely used in agriculture owing to their high effectiveness as insecticides. Among these, diazinon is a common environmental contaminant that acts as an acetylcholinesterase (AChE) enzyme inhibitor. As the current methods are too expensive and time-consuming for routine analysis of diazinon, its trace monitoring by rapid and sensitive methods is critical to protect the environment and human health.

RESULTS

A biosensor was introduced for the indirect detection of diazinon using a molybdenum disulfide/zirconium metal-organic framework (MoS₂@MIP-202(Zr)) nanocomposite. The probe is based on the peroxidase mimic of the prepared nanocomposite on NaHCO₃-H₂O₂ chemiluminescence system as well as the inhibitory effect of diazinon on the enzymatic activity of AChE. The chemiluminescence signal is gradually decreased with an increase in diazinon concentration, and there is a linear relationship between the analytical signal and diazinon concentration. Under the optimum conditions, the calibration plot is linear in the concentration range of 0.5-300.0 nmol L^-1. The limit of detection and quantification limit of the method are 0.12 and 0.40 nmol L^-1, respectively. The inter-day and intra-day relative standard deviations (% RSD n = 5, diazinon concentration; 100 nmol L^-1) are 3.66 and 1.35%, respectively. The method was used for diazinon detection in real water samples, and the high relative recovery values for the spiked samples along with satisfactory results of a certified reference material analysis confirmed that the method is accurate and free from the matrix effect.

SIGNIFICANCE AND NOVELTY

A nano-probe based on the peroxidase-like property of MoS₂@MIP-202(Zr) nanocomposite was developed for the first time for indirect detection of residue levels of diazinon in water samples. The high stability of the nanocomposite makes it a good alternative for natural peroxidase enzymes such as horseradish peroxidase with low stability.

Design and development of novel magnetic Lentinan/PVA nanocomposite for removal of diazinon, malathion, and diclofenac contaminants

Increasing population growth and rapid expansion of the industrialization of the world society have caused severe environmental pollution to the planet. This study was carried out in order to investigate the synthesis of biopolymeric texture nano adsorbent based on the Lentinan (LENT), Poly Vinyl Alcohol (PVA) and Iron Oxide nanoparticles for the removal of environmental pollutants. The spherical structural morphology of Fe₃O₄@LENT/PVA nanocomposite has been determined by FE-SEM analyses. According to the obtained results from FTIR analyses, all absorption bands of the Fe₃O₄, LENT, and PVA, had been existed in nanocomposite and approved the successful formation of it. From EDS analysis, it has been revealed that 57.21 wt% Fe, 17.56 wt% C and 25.23 wt% O. Also, the XRD pattern of the nanocomposite, approved the presence of polymeric and magnetic parts with card no. JCPDS, 01-075-0033. The BET analysis has defined specific surface area (47 m²/g) and total pore volume (0.15 cm³/g). Moreover, high heterogeneity and structural stability of the fabricated Fe₃O₄@LENT/PVA nanocomposite have been proven by TGA. Besides, VSM analysis measured great magnetic property of the nanocomposite (48 emu/g). Also, the Fe₃O₄@LENT/PVA nanocomposite potential for effective removal of malathion (MA), Diazinon (DA), and Diclofenac (DF) from watery solution has studied by an experiment based on the efficacy of adsorbent dosage, pH, and temperature. The adsorption kinetics of three pollutants had investigated using pseudo-first-order (PFO), pseudo-second-order (PSO) and intra-particle diffusion (IPD) velocity equations, the results showed that the kinetics followed PSO velocity equations. Also, the Langmuir, Freundlich, Dubbin-Radushkevich (D-R) and Temkin isotherm models had investigated, and the adsorption isotherm was adopted from the Langmuir model. The results demonstrated that in the presence of Fe₃O₄@LENT/PVA nanocomposite, at the optimal conditions (contact time = 180 min, pH = 5, nanocomposite dosage = 0.20 g/L and temperature of 298 K) the maximum adsorption capacity of MA, DF, and DA were 101.57, 153.28, and 102.75 mg/g, respectively. The antibacterial features of the Fe₃O₄@LENT/PVA nanocomposite, had evaluated by Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) bacteria, but the result did not show any antibacterial activity.

An inclusive outlook on the fate and persistence of pesticides in the environment and integrated eco-technologies for their degradation

Intensive and inefficient exploitation of pesticides through modernized agricultural practices has caused severe pesticide contamination problems to the environment and become a crucial problem over a few decades. Due to their highly toxic and persistent properties, they affect and get accumulated in non-target organisms, including microbes, algae, invertebrates, plants as well as humans, and cause severe issues. Considering pesticide problems as a significant issue, researchers have investigated several approaches to rectify the pesticide contamination problems. Several analyses have provided an extensive discussion on pesticide degradation but using specific technology for specific pesticides. However, in the middle of this time, cleaner techniques are essential for reducing pesticide contamination problems safely and environmentally friendly. As per the research findings, no single research finding provides concrete discussion on cleaner tactics for the remediation of contaminated sites. Therefore, in this review paper, we have critically discussed cleaner options for dealing with pesticide contamination problems as well as their advantages and disadvantages have also been reviewed. As evident from the literature, microbial remediation, phytoremediation, composting, and photocatalytic degradation methods are efficient and sustainable and can be used for treatment at a large scale in engineered systems and in situ. However, more study on the bio-integrated system is required which may be more effective than existing technologies.

Utilizing modified cellulose nanoparticles derived from a plant loofah sponge to improve the removal of diazinon insecticide from an aqueous medium

Organophosphate insecticides, such as diazinon, have been well investigated to pose health and environmental risks. In this study, ferric-modified nanocellulose composite (FCN) and nanocellulose particles (CN) based on a natural source as a loofah sponge were synthesized to verify their adsorption potential to eliminate diazinon (DZ) from contaminated water. The as-prepared adsorbents were characterized by performing TGA, XRD, FTIR spectroscopy, SEM, TEM, pH_PZC, and BET analyses, in which FCN showed high thermal stability, surface area of 82.65 m² g^-1, surface with mesopores, good crystallinity (61.6%), and particle size of 86.0 nm. The results of adsorption tests demonstrated that the maximum Langmuir adsorption capacity (294.98 mg g^-1) was exhibited by FCN at 38 °C, pH 7, 1.0 g L^-1 of adsorbent dosage, and 20 h of contact shaking time. The effect of adding KCl solution with high ionic strength (1.0 mol L^-1) reduced the DZ removal percent by 52.9%. The experimental adsorption data achieved the best fit with all the applied isotherm models with favorable, physical, and endothermic nature of adsorption consistent with thermodynamic data. Pentanol attained higher desorption efficiency (95%) and was used in five adsorption/desorption cycles in which FCN exhibited only an 8.8% decrease in the removal percent of DZ.

A review on the applicability of adsorption techniques for remediation of recalcitrant pesticides

Pesticide has revolutionised the agricultural industry by reducing yield losses and by enhancing productivity. But indiscriminate usage of such chemicals can negatively impact human health and ecosystem balance as certain pesticides can be recalcitrant in nature. Out of some of the suggested sustainable techniques to remove the pesticide load from the environment, adsorption is found to be highly efficient and can also be implemented on a large scale. It has been observed that natural adsorption that takes place after the application of the pesticide is not enough to reduce the pesticide load, hence, adsorbents like activated carbon, plant-based adsorbents, agricultural by-products, silica materials, polymeric adsorbents, metal organic framework etc are being experimented upon. It is becoming increasingly important to choose adsorbents which will not leave any secondary pollutant after treatment and the cost of production of such adsorbent should be feasible. In this review paper, it has been established that certain adsorbent like biochar, hydrochar, resin, metal organic framework etc can efficiently remove pesticides namely chlorpyrifos, diazinon, 2,4-Dichlorophenoxyacetic Acid, atrazine, fipronil, imidacloprid etc. The mechanism of adsorption, thermodynamics and kinetic part have been discussed in detail with respect to the pesticide and adsorbent under discussion. The reason behind choosing an adsorbent for the removal of a particular pesticide have also been explained. It is further highly recommended to carry out a cost analysis before implementing an absorbent because inspite of its efficacy, it might not be cost effective to use it for a particular type of pesticide or contaminant.

Coconut shell and husk biochar: A review of production and activation technology, economic, financial aspect and application

The coconut industry generates a relatively large amount of coconut shell and husk biomass, which can be utilized for industrial and environmental purposes. Immense potential for added value when coconut shell and husk biomass are turned into biochar and limited studies are available, making this review paper significant. This paper specifically presents the production and activation technology, economic and financial aspect and application of biochar from coconut shell and husk biomass. Pyrolysis, gasification and self-sustained carbonization are among the production technology discussed to convert this biomass into carbon-rich materials with distinctive characteristics. The surface characteristics of coconut-based biochar, that is, Brunauer-Emmett-Teller (BET) surface area (S_BET), pore volume (V_p), pore diameter (d_p) and surface functional group can be enhanced by physical and chemical activation and metal impregnation. Due to their favourable characteristics, coconut shell and husk-activated biochar exhibit their potential as valuable adsorption materials for industrial and environmental application including biodiesel production, capacitive deionization, soil amendment, water treatment and carbon sequestration. With the knowledge of the potential, the coconut industry can contribute to both the local and global biocircular economy by producing coconut shell and husk biochar for economic development and environmental remediation. The capital and operating cost for production and activation processes must be taken into account to ensure bioeconomy sustainability, hence coconut shell and husk biomass have a great potential for income generation.

Design a flower-like magnetic graphite carbon microsphere for enhanced adsorption of 2,4-dichlorophenol

2,4-Dichlorophenol (2,4-DCP) is a hazardous chlorinated organic chemical, so its removal is an important task to protect the whole ecosystem and human health. During the material preparation, the magnetic graphitic carbon adsorbent (HFMCM) with a sparse sheet-like stacking structure was formed by interlayer assembly of nickel hydroxide nanosheets and hydrothermal glucose carbon. The conditions for optimal performance of the adsorbent are 45 °C and pH 5. The maximum adsorption capacity of HFMCM-180 for 2,4-DCP is 147.06 mg·g^-1. Adsorption behavior in accordance with Langmuir isothermal model and pseudo-second-order kinetic models. The adsorbent remains selective for 2,4-DCP in metal ion solutions. More than 75% of the adsorption capacity is maintained after five cycles of adsorption. Electrostatic interaction, hydrogen bonding, and π-π bonding play a major role in the adsorption of 2,4-DCP by HFMCM. The adsorbent was glucose as the carbon source, nickel sulfate as the magnetic source, and hexamethylenetetramine as the precipitant. Its carbonization after pretreatment with different hydrothermal temperatures resulted in the synthesis of flower-like graphitic carbon spheres with magnetic properties. The interconnected pore channels on the adsorbent surface conferred large specific surface area to the material. 2,4-DCP was efficiently adsorbed by π-π stacking, hydrogen bonding, and electrostatic attraction within the pore channels with low spatial potential resistance.

Recent Advances in the Synthesis, Characterization, and Application of Carbon Nanomaterials for the Removal of Endocrine-Disrupting Chemicals: A Review

The large-scale production and frequent use of endocrine-disrupting chemicals (EDCs) have led to the continuous release and wide distribution of these pollutions in the natural environment. At low levels, EDC exposure may cause metabolic disorders, sexual development, and reproductive disorders in aquatic animals and humans. Adsorption treatment, particularly using nanocomposites, may represent a promising and sustainable method for EDC removal from wastewater. EDCs could be effectively removed from wastewater using various carbon-based nanomaterials, such as carbon nanofiber, carbon nanotubes, graphene, magnetic carbon nanomaterials, carbon membranes, carbon dots, carbon sponges, etc. Important applications of carbon nanocomposites for the removal of different kinds of EDCs and the theory of adsorption are discussed, as well as recent advances in carbon nanocomposite synthesis technology and characterization technology. Furthermore, the factors affecting the use of carbon nanocomposites and comparisons with other adsorbents for EDC removal are reviewed. This review is significant because it helps to promote the development of nanocomposites for the decontamination of wastewater.

Efficient removal of 2,4-D from solution using a novel antibacterial adsorbent based on tiger nut residues: adsorption and antibacterial study

We engineered a tiger nut residue (TNR, a low-cost agricultural waste material) through a facile and simple process to take advantage of the introduced functional groups (cetylpyridinium chloride, CPC) in the removal of 2,4-dichlorophenoxyacetic acid (2,4-D) in batch mode and further investigated its impingement on bacterial growth in a yeast-dextrose broth. The surface characterizations of the adsorbent were achieved through Fourier-transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller method (BET), X-ray diffraction analysis (XRD), and X-ray photoelectron spectroscopy (XPS). The batch adsorption studies revealed that solution pH, adsorbent dose, temperature, and salt affected the adsorptive capacity of TNR-CPC. The equilibrium data were best fitted by Langmuir isotherm model with a maximum monolayer adsorption capacity of 90.2 mg g^-1 at 318 K and pH 3. Pseudo-second-order model best fitted the kinetics data for the adsorption process. Physisorption largely mediated the adsorption system with spontaneity and a shift in entropy of the aqueous solid-solute interface reflecting decreased randomness with an exothermic character. TNR-CPC demonstrated a good reusability potential making it highly economical and compares well with other adsorbents for decontamination of 2,4-D. The adsorption of 2,4-D proceeded through a probable trio-mechanism; electrostatic attraction between the carboxylate anion of 2,4-D and the pyridinium cation of TNR-CPC, hydrogen bonding between the hydroxyl (-OH) group inherent in the TNR and the carboxyl groups in 2,4-D and a triggered π-π stacking between the benzene structures in the adsorbate and the adsorbent. TNR-CPC reported about 99% inhibition rate against both gram-positive S. aureus and gram-negative E. coli. It would be appropriate to investigate the potential of TNR-CPC as a potential replacement to the metal oxides used in wastewater treatment for antibacterial capabilities, and its effects against airborne bacteria could also be of interest.

Bio-efficacy of imidazolinones in weed control in a tropical paddy soil amended with optimized agrowaste-derived biochars

Biochar is a black carbon sorbent that has the ability to stabilize organic substances in soil and, therefore, the potential to reduce their bio-availability. This sustainable material can be produced from locally-available agro wastes. The present study, for the first time, investigated the effects of biochars produced from oil palm empty fruit bunches (EFB) and rice husk (RH) on the efficiency of imazapic and imazapyr (two polar members of imidazolinone herbicides) as well as Onduty®, a mixture of them. It was executed in a Malaysian paddy field soil during a 30-day greenhouse experiment. The presence of optimized EFB and RH biochars in the heavy soil generally increases weed seeds germination and plants growth due to stabilization of the herbicides. The effect of EFB biochar was found higher than RH biochar having a higher affinity to the herbicides. An increase in the biochars application rates enhanced their effects as a soil modifier. Differences were more significant in the higher herbicides doses. Efficacies of all the herbicides were generally decreased in the biochar-amended soils. In the presence of 0.5% biochar in soil, the GR₅₀ values for all herbicides were almost similar to biochar-free soil. In a 1.0% biochar-soil mixture, GR₅₀ values of the herbicides increased by about 1.5 times. Bio-efficacies of the herbicides decreased by around 2.0 times as the biochar application rate enhanced to 2.0%. The greatest GR₅₀ values were obtained in the presence of 4.0% biochar in the soils and were about 7.0-8.5 folds, indicating the high capability of amended soil in the stabilization of the herbicides. The findings of this study can help to reduce imidazolinones' pollution and, in this way, prevent the threats of their residues to the environment.

Enhanced removal of neonicotinoid pesticides present in the Decision 2018/840/EU by new sewage sludge-based carbon materials

Due to the increasingly strict legislation about the disposal of sewage sludge, it is necessary to find sustainable solutions to manage this waste at low-cost conditions. In addition, priority contaminants are now attracting much attention since they are usually detected in WWTP effluents. In this work, five sludge have been used as precursors for the synthesis of activated carbons subsequently tested in the removal by adsorption of three neonicotinoid pesticides listed in the EU Watch List: acetamiprid (ACT), thiamethoxam (THM), and imidacloprid (IMD). Generally, the activated carbons were prepared by chemical activation using ZnCl₂ as an activating agent and then the resulting materials were pyrolyzed at 800 °C for 2 h. The synthesized activated carbons showed different textural properties; thus, the best adsorption results were found for AC-Industrial activated carbon, obtained from an industrial origin sewage sludge, with high equilibrium adsorption capacities (q_e = 104.2, 137.0, and 119.9 mg g^-1), for ACT, THM, and IMD, respectively. Furthermore, it was elucidated that the use of CO₂ in the synthesis generated an opening, followed by widening, of the narrowest microporosity, increasing the specific surface area of the carbon materials. The kinetic and isotherm adsorption experimental data were obtained for each of the pesticide-activated carbon systems; thus, the kinetic curves were well-fitted to the pseudo-second-order kinetic model, as well as, Freundlich and Guggenheim-Anderson-de Boer (GAB) empirical models were used for the fitting of the equilibrium adsorption isotherms, finding that GAB model best fitted the experimental data. Additionally, the regeneration of the activated carbons using methanol as a regenerating agent and the single and simultaneous adsorption of a hospital wastewater effluent, fortified with the three studied pesticides have been explored.

Progress in preparation of plant biomass-derived biochar and application in pesticide residues field

随着农药的广泛使用,其已普遍存在于环境中,对人们的身体健康产生巨大影响。因此,环境中农药残留的去除和分析检测对保护人体安全健康至关重要。同时,农药在环境中残留浓度低,需要一种对目标物有较强选择性和富集作用,并对环境影响小的前处理吸附剂。植物源生物炭是由植物源生物质作为碳源衍生得到的材料,其比表面积大、孔容量高、表面官能团可调节,且环境相容性好,其原料植物源生物质的价格低廉、来源广泛并可再生,是一种廉价高效的吸附剂。该文主要综述了近10年来植物源生物炭用于环境中农药残留去除和分析检测前处理的应用进展。其中在农药残留去除方面的应用主要包括降低农药在土壤中的移动性,修复手性农药造成的污染,负载降解农药的细菌及作为化肥的缓释载体。在农药残留分析检测前处理方面,植物源生物炭可用作分散固相萃取、固相微萃取和磁性固相萃取的吸附剂来选择性吸附水果和蔬菜中的有机磷类和三唑类农药,以及水环境中的有机氯类农药。另外,还介绍了植物源生物炭的吸附机理,详细阐述了基于计算模拟如密度泛函理论、分子动力学模拟和巨正则蒙特卡洛模拟的吸附机理研究并讨论了其优势。最后,总结了植物源生物炭在农药去除和农药残留分析检测前处理方面应用的优势,指出了其在农药残留领域应用待解决的问题。

Biochar-based composites for remediation of polluted wastewater and soil environments: Challenges and prospects

Pharmaceuticals, heavy metals, pesticides, and dyes are the main environmental contaminants that have serious effects on both land and aquatic lives and necessitate the development of effective methods to mitigate these issues. Although some conventional methods are in use to tackle soil contamination, but biochar and biochar-based composites represent a reliable and sustainable means to deal with a spectrum of toxic organic and inorganic pollutants from contaminated environments. The capacity of biochars and derived constructs to remediate inorganic dyes, pesticides, insecticides, heavy metals, and pharmaceuticals from environmental matrices is attributed to their extensive surface area, surface functional groups, pore size distribution, and high sorption capability of these pollutants in water and soil environments. Application conditions, biochar feedstock, pyrolysis conditions and precursor materials are the factors that influence the capacity and functionality of biochar to adsorb pollutants from wastewater and soil. These factors, when improved, can benefit biochar in agrochemical and heavy metal remediation from various environments. However, the processes involved in biochar production and their influence in enhancing pollutant sequestration remain unclear. Therefore, this paper throws light on the current strategies, operational conditions, and sequestration performance of biochar and biochar-based composites for agrochemical and heavy metal in soil and water environments. The main challenges associated with biochar preparation and exploitation, toxicity evaluation, research directions and future prospects for biochar in environmental remediation are also outlined.

Adsorption Kinetics of Imidacloprid, Acetamiprid and Methomyl Pesticides in Aqueous Solution onto Eucalyptus Woodchip Derived Biochar

This work reports the application of a biochar (BC) derived from eucalyptus wood chips to remove pesticides (imidacloprid, acetamiprid and methomyl) from water. The pseudo-second order kinetic adsorption model is the best fit describing the adsorption of pesticides on BC. Furthermore, the Langmuir model correlated well with the adsorption isotherm data for acetamiprid and methomyl, while the Freundlich model was selected to explain the adsorption of imidacloprid on BC. The maximum adsorption capacities for methomyl, imidacloprid and acetamiprid on the BC material are 32.42, 14.75 and 4.87 mg g−1, respectively. The highest adsorption capacity of methomyl on the BC surface could be the result of multilayer adsorption suggested by the adsorption isotherm studies, with imidacloprid (or acetamiprid) monolayer being adsorbed on the BC surface. The structure, functional groups of pesticides, including their polarity, all played an important role contributing to the performance of biochar sorbent. Preferable interactions between the studied pesticides and the BC surface may include π-π interactions and hydrogen bonding. The steric aromatic entity in adsorbed imidacloprid and acetamiprid on the BC surface may hinder the possibility of other pesticide molecules approaching the available sorption sites on the surface.

Pristine and engineered biochar for the removal of contaminants co-existing in several types of industrial wastewaters: A critical review

Biochar has been widely studied as an adsorbent for the removal of contaminants from wastewater due to its unique characteristics, such as having a large surface area, well-distributed pores and high abundance of surface functional groups. Critical review of the literature was performed to understand the state of research in utilizing biochars for industrial wastewater remediation with emphasis on pollutants that co-exist in wastewater from several industrial activities, such as textile, pharmaceutical and mining industries. Such pollutants include organic (such as synthetic dyes, phenolic compounds) and inorganic contaminants (such as cadmium, lead). Multiple correspondence analyses suggest that through batch equilibrium, columns or constructed wetlands, researchers have used mechanistic modelling of isotherms, kinetics, and thermodynamics to evaluate contaminant removal in either synthetic or real industrial wastewaters. The removal of organic and inorganic contaminants in wastewater by biochar follows several mechanisms: precipitation, surface complexation, ion exchange, cation-π interaction, and electrostatic attraction. Biochar production and modifications promote good adsorption capacity for those pollutants because biochar properties stemming from production were linked to specific adsorption mechanisms, such as hydrophobic and electrostatic interactions. For instance, adsorption capacity of malachite green ranged from 30.2 to 4066.9 mg g^-1 depending on feedstock type, pyrolysis temperature, and chemical modifications. Pyrolyzing biomass at above 500 °C might improve biochar quality to target co-existing pollutants. Treating biochars with acids can also improve pollutant removal, except that the contribution of precipitation is reduced for potentially toxic elements. Studies on artificial intelligence and machine learning are still in their infancy in wastewater remediation with biochars. Meanwhile, a framework for integrating artificial intelligence and machine learning into biochar wastewater remediation systems is proposed. The reutilization and disposal of spent biochar and the contaminant release from spent biochar are important areas that need to be further studied.

Optimization of extraction conditions and determination of the Chlorpyrifos, Diazinon, and malathion residues in environment samples: Fruit (Apple, Orange, and Tomato)

•

CPF, diazinon, and malathion residues in fruit was studed.

•

Concentration of studied pesticides is positively correlated to the texture of studied fruits.

•

Pesticide residues in studying fruits decreased by an increase in public surveillance.

Organophosphate (OP) insecticide, such as diazinon is found in the environments like water which is still approved for agricultural uses. When diazinon residues enter the human body, it functions as an acetylcholinesterase (AChE) inhibitor. This research aims to measure of chlorpyrifos (CPF), diazinon, and malathion residues in fruit such as apple, orange, and tomato after optimizing extraction conditions. Pesticide residues are measured by gas chromatography (GC) technique. Effective variables on pesticide residues are studied including pesticides kind, sampling station, and fruit kind. Results show that average concentration CPF, diazinon, and malathion residues in orange water are 7.05 ± 0.01 mg L⁻¹, 6.66 ± 0.03 mg L⁻¹, and 12.38 ± 0.02 µgL⁻¹, respectively. The average concentration CPF, diazinon, and malathion residues in apple water are 0.74 ± 0.02 mgL⁻¹, 0.70 ± 0.01 mgL⁻¹, and 1.10 ± 0.01 µgL⁻¹, respectively. The average concentration CPF, diazinon, and malathion residues in tomato water are 0.60 ± 0.02 mgL⁻¹, 0.57 ± 0.02 mgL⁻¹, and 0.89 ± 0.01 µgL⁻¹, respectively. The highest CPF concentration is observed in the orange fruit from station 20. Due to an appropriate storage condition and presenting organic fruits in the supermarket, the least mean concentration of pesticides is obtained in studied fruits from station 2. The manner of washing, peeling, and storage period before consuming fruits lead to decreasing studied pesticides concentration about 15–35, 40–50, and 50–60%, respectively. Increasing the fruit shelf-life led to decreasing studied pesticides concentration. Between pesticide concentration and variables: pesticides kind, sampling station, fruit kind, are not seen meaningful statistic relationship (P > 0.05). This study showed that pesticide residues in fruits can be decreased by washing, refrigerating, peeling procedures and increase in public surveillance.

Sustainable materials in the removal of pesticides from contaminated water: Perspective on macro to nanoscale cellulose

Recently, over utilization of pesticides in agrarian and non- agrarian sectors has resulted in a significant increment in the deposition of their remnants in different segments of the environmental media. The presence of pesticides and transportation of their different metabolites in rivers, ponds, lakes, soils, air, groundwater sources and drinkable water sources has demonstrated a high threat to human wellbeing and the climate. Thus, the removal of pesticides and their metabolites from contaminated water is imperative to lessen the ill effects of pesticides on human beings. In the present article, we have appraised recent advances in pesticides removal utilizing low cost pristine and functionalized cellulose biomass-based derivatives. One of the key focus has been on better understand the destiny of pesticides in the environment as well as their behaviour in the water. In addition, the impact of magnetite cellulose nanocomposites, cellulose derived photo nano-catalyst, cellulose/clay nano composites, CdS/cellulose nanocomposites and activated carbons/biochar on percent removal of pesticides have also been a part of the current review. The impact of different parameters such as adsorbent dosage, pH, time of contact and initials pesticide concentration on adsorption capacity and adsorption kinetics followed during absorption by different cellulosic bio-adsorbents has also been given. The cellulosic biomass is highly efficient in the removal of pesticides and their efficiency further increases upon functionalization or their conversion into activated carbons forms. Nano particles loaded cellulosic materials have in general found to be less efficient than raw, functionalized cellulosic materials and activated carbons. Further, among different nano particles loaded with cellulose-based materials, cellulose/MnO₂ photonanocatalyst were noticed to be more effective. So considerable efforts should be given to determine the finest practices that relate to the dissipation of different pesticides from the water.

Bio-Zirconium Metal-Organic Framework Regenerable Bio-Beads for the Effective Removal of Organophosphates from Polluted Water

Organophosphate-based pesticides, such as diazinon, are among the most toxic organic contaminants to human and environment. Effective removal of diazinon from contaminated water sources is critical. Zirconium Metal−organic frameworks (Zr-MOFs) are promising candidates for the removal of organic contaminants from wastewater. Herein, we report the adequacy of a bio based Zr-MOF named MIP-202 for the removal of diazinon from water. On the other hand, the use of these materials in powder form is not workable, the development of scalable and economical processes and integrative of these materials onto beads is paramount for industrial processes. Hence, it was reported a scalable, bio aqueous solution-based preparation strategy for Bio Zr-MOF beads production. The composite material exposed identical reactivity under the same ambient parameters compared to powdered material in an aqueous solution. These results signify a critical procedure to an integrated strategy for organophosphates removal using bio-based MOFs, which demonstrates high potential for manufacturing applications such as continued removal of organophosphates from wastewater supplies.

Environmental Occurrence, Toxicity Concerns, and Degradation of Diazinon Using a Microbial System

Diazinon is an organophosphorus pesticide widely used to control cabbage insects, cotton aphids and underground pests. The continuous application of diazinon in agricultural activities has caused both ecological risk and biological hazards in the environment. Diazinon can be degraded via physical and chemical methods such as photocatalysis, adsorption and advanced oxidation. The microbial degradation of diazinon is found to be more effective than physicochemical methods for its complete clean-up from contaminated soil and water environments. The microbial strains belonging to Ochrobactrum sp., Stenotrophomonas sp., Lactobacillus brevis, Serratia marcescens, Aspergillus niger, Rhodotorula glutinis, and Rhodotorula rubra were found to be very promising for the ecofriendly removal of diazinon. The degradation pathways of diazinon and the fate of several metabolites were investigated. In addition, a variety of diazinon-degrading enzymes, such as hydrolase, acid phosphatase, laccase, cytochrome P450, and flavin monooxygenase were also discovered to play a crucial role in the biodegradation of diazinon. However, many unanswered questions still exist regarding the environmental fate and degradation mechanisms of this pesticide. The catalytic mechanisms responsible for enzymatic degradation remain unexplained, and ecotechnological techniques need to be applied to gain a comprehensive understanding of these issues. Hence, this review article provides in-depth information about the impact and toxicity of diazinon in living systems and discusses the developed ecotechnological remedial methods used for the effective biodegradation of diazinon in a contaminated environment.

Omics technologies used in pesticide residue detection and mitigation in crop

In agriculture, the convenience and efficacy of chemical pesticides have become inevitable to manage cultivated crop production. Here, we review the worldwide use of pesticides based on their categories, mode of actions and toxicity. Excessive use of pesticides may lead to hazardous pesticide residues in crops, causing adverse effects on human health and the environment. A wide range of high-tech-analytical methods are available to analyse pesticide residues. However, they are mostly time-consuming and inconvenient for on-site detection, calling for the development of biosensors that detect cellular changes in crops. Such new detection methods that combine biological and physicochemical knowledge may overcome the shortage in current farming to develop sustainable systems that support environmental and human health. This review also comprehensively compiles domestic pesticide residues removal tips from vegetables and fruits. Synthetic pesticide alternatives such as biopesticide and nanopesticide are greener to the environment. However, its safety assessment for large-scale application needs careful evaluation. Lastly, we strongly call for reversions of pesticide application trends based on the changing climate, which is lacking in the current scenario.

Biochars derived from bamboo and rice straw for sorption of basic red dyes

The primary purpose of this study is to eliminate Basic Red 46 dye from aqueous solutions utilizing batch experiments by adsorption on biochars prepared from bamboo and rice straw biomass. Biochars prepared from bamboo (B), and rice straw (R) was pyrolyzed at 500°C (B500 and R500). Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) Spectroscopy, X-ray Diffraction (XRD), and surface area and porosity analyzers were used to characterize the B500 and R500 samples. The characterization results indicated that the biochars possessed an amorphous porous structure with many functional groups consisting primarily of silicates. The adsorption rate of BR46 was evaluated using two kinetic models (pseudo-first-order and pseudo-second-order), and the results indicated that the pseudo-second-order model fitted to the experimental data well (R2>0.99). Nearly 24 h was sufficient to achieve equilibrium with the dye adsorption for the two biochars. R500 had a greater adsorption efficiency than B500. As pH levels increased, the dye's adsorption capability increased as well. The Langmuir and Freundlich isotherm models were used to investigate the equilibrium behavior of BR46 adsorption, and the equilibrium data fitted well with the Langmuir model (R2>0.99) compared to the Freundlich model (R2>0.89). The maximum adsorption capacities of BR46 are 9.06 mg/g for B500 and 22.12 mg/g for R500, respectively. Additionally, adsorption capacity increased as temperature increased, indicating that adsorption is favored at higher temperatures. The electrostatic interaction is shown to be the dominant mechanism of BR46 adsorption, and BR46 acts as an electron-acceptor, contributing to n-π EDA (Electron Donor-Acceptor) interaction. Thermodynamic parameters for the dye-adsorbent system revealed that the adsorption process is spontaneous and feasible. The values of the adsorption coefficient (Kd) were on the order of 102-103. Kd of R500 was greater than that of B500, indicating that R500 had a greater adsorption capacity. The results showed that R500 could be used as a low-cost alternative adsorbent for removing BR46 from effluents.

Process optimization and enhancement of pesticide adsorption by porous adsorbents by regression analysis and parametric modelling

In the present study, the adsorptive removal of organophosphate diazinon pesticide using porous pumice adsorbent was experimentally investigated in a batch system, modelled and optimized upon response surface methodology (RSM) and artificial neural network-genetic algorithm (ANN-GA), fitted to isotherm, kinetic and thermodynamic models. The quantification of adsorbent elements was determined using EDX. XRD analysis was utilized to study the crystalline properties of adsorbent. The FT-IR spectra were taken from adsorbent before and after adsorption to study the presence and changes in functional groups. The constituted composition of the adsorbent was determined by XRF. Also, the ionic strength and adsorbent reusability were explored. The influences of operational parameters like pH, initial pesticide concentration, adsorbent dosage and contact time were investigated systematically. ANN-GA and RSM techniques were used to identify the optimal process variables that result in the highest removal. Based on the RSM approach, the optimization conditions for maximum removal efficiency is obtained at pH = 3, adsorbent dosage = 4 g/L, contact time = 30 min, and initial pesticide concentration = 6.2 mg/L. To accurately identify the parameters of nonlinear isotherm and kinetic models, a hybrid evolutionary differential evolution optimization (DEO) is applied. Results indicated that the equilibrium adsorption data were best fitted with Langmuir and Temkin isotherms and kinetic data were well described by pseudo-first and second-order kinetic models. The thermodynamic parameters such as entropy, enthalpy and Gibbs energy were evaluated to study the effect of temperature on pesticide adsorption.

Biochar for remediation of agrochemicals and synthetic organic dyes from environmental samples: A review

Application of agrochemicals in farming sector to control insects and pests; and use of synthetic organic dyes to color the products are increasing continuously due to the rapid growth of industries. During the application process many industries releases toxic agrochemicals and dyes in to the aquatic environment and on land without the proper treatment. Due to their toxicity the disposal of such chemicals is of utmost importance. Biochar offers the ability to remediate these substances from environmental matrices because of their high sorption ability of pollutants from water and soil. This review highlights the development and advancement of biochar-based treatment for abatement of agrochemicals and synthetic organic dyes, involving its technical aspects and the variables connected with removing these kinds of pollutants. Several optimization parameters like temperature, pH, chemical concentration, biochar properties, time, and co-existing ions have been elaborated. Literature survey shows that most of the researches on biochar application have been conducted in the batch mode. Hence there is an urgent need to apply this beneficial technique for the remediation of pollutants at the larger scale in the real water and soil samples. A comprehensive summary on sorption kinetics and adsorption isotherms with regards to pollutant removal is also presented. This review also covers the cost analysis of various techniques where biochar has been used as an adsorbent. Thus this review makes an easy roadmap for the further development in biochar and biochar based composites and expansion of these demanding areas of research in biochar and their applications.

Biochar for simultaneously enhancing the slow-release performance of fertilizers and minimizing the pollution of pesticides

Biochar has been extensively studied as a promising carrier material for fertilizers and an ideal adsorbent for the removal of pesticides. Yet, the application of biochar for simultaneously eliminating the pollution from the agricultural use of fertilizers and pesticides remains unexplored. Herein, we develop P-loaded biochar-based fertilizers (PBC) by the co-pyrolysis of cotton straw and H₃PO₄. The slow-release performance of PBC and their adsorption properties toward pesticides are investigated. The results indicate that the PBC leads to the improvement of adsorption performance, with the maximum adsorption capacities of lambda-cyhalothrin (LAC) for PBC and pristine biochar are 55.90 mg/g and 42.71 mg/g, respectively. Additionally, the adsorption of LAC is beneficial for the improvement of slow-release performance of PBC. The release ratios of P from PBC within 30 days reach 100.0% and 83.5% in water and LAC solution, respectively, demonstrating the existence of synergistic effects between the adsorption of pesticides and the slow release of nutrients. The mechanistic investigation reveals that the pretreatment of H₃PO₄ facilitates to activate more surface functional groups of PBC, contributing greatly to the improved adsorption of LAC. The adsorption of LAC reduces the BET of PBC with pore filling, enabling slower release rate of nutrients from PBC.

Effects of NaOH Activation on Adsorptive Removal of Herbicides by Biochars Prepared from Ground Coffee Residues

In this study, the adsorption of herbicides using ground coffee residue biochars without (GCRB) and with NaOH activation (GCRB-N) was compared to provide deeper insights into their adsorption behaviors and mechanisms. The physicochemical characteristics of GCRB and GCRB-N were analyzed using Brunauer–Emmett–Teller surface area, Fourier transform infrared spectroscopy, scanning electron microscopy, and X-ray diffraction and the effects of pH, temperature, ionic strength, and humic acids on the adsorption of herbicides were identified. Moreover, the adsorption kinetics and isotherms were studied. The specific surface area and total pore volume of GCRB-N (405.33 m2/g and 0.293 cm3/g) were greater than those of GCRB (3.83 m2/g and 0.014 cm3/g). The GCBR-N could more effectively remove the herbicides (Qe,exp of Alachlor = 122.71 μmol/g, Qe,exp of Diuron = 166.42 μmol/g, and Qe,exp of Simazine = 99.16 μmol/g) than GCRB (Qe,exp of Alachlor = 11.74 μmol/g, Qe,exp of Diuron = 9.95 μmol/g, and Qe,exp of Simazine = 6.53 μmol/g). These results suggested that chemical activation with NaOH might be a promising option to make the GCRB more practical and effective for removing herbicides in the aqueous solutions.