Molecular and biophysical basis for the disruption of lung surfactant function by chemicals

High-throughput screening of respiratory hazards: Exploring lung surfactant inhibition with 20 benchmark chemicals

As environmental air quality worsens and respiratory health injuries and diseases increase, it is essential to enhance our ability to develop better methods to identify potential hazards. One promising approach in emerging toxicology involves the utilization of lung surfactant as a model that addresses the limitations of conventional in vitro toxicology methods by incorporating the biophysical aspect of inhalation. This study employed a constrained drop surfactometer to assess 20 chemicals for potential surfactant inhibition. Of these, eight were identified as inhibiting lung surfactant function: 1-aminoethanol, bovine serum albumin, maleic anhydride, propylene glycol, sodium glycocholate, sodium taurocholate, sodium taurodeoxycholate, and Triton X-100. These results are consistent with previously reported chemical-induced acute lung dysfunction in vivo. The study provides information on each chemical's minimum and maximum surface tension conditions and corresponding relative area and contact angle values. Isotherms and box plots are reported for selected chemicals across doses, and vector plots are used to summarize and compare the results concisely. This lung surfactant bioassay is a promising non-animal model for hazard identification, with broader implications for developing predictive modeling and decision-making tools.

Effect of lipid-polymer hybrid nanoparticles on the biophysical function and lateral structure of pulmonary surfactant: Mechanistic in vitro studies

The interaction between inhaled drug-loaded nanoparticles and pulmonary surfactant (PS) is critical for the efficacy and safety of inhaled nanomedicines. Here, we investigated the effect of small interfering RNA (siRNA)-loaded lipid-polymer hybrid nanoparticles (LPNs), which are designed for treatment of lung inflammation, on the physiological function of PS. By using biophysical in vitro methods we show that siRNA-loaded LPNs affect the biophysical function and lateral structure of PS. We used the Langmuir monolayer technique to demonstrate that LPNs display intrinsic surface activity by forming interfacial films that collapse at 49 mN/m, and they competitively inhibit the adsorption and spreading of PS components at the air-liquid interface. However, LPNs are excluded from the interface into the aqueous subphase at surface pressures above 49 mN/m, and hence they overcome the PS monolayer film barrier. Epifluorescence microscopy data revealed that LPNs influence the lateral structure of PS by: (i) affecting the nucleation, shape, and growth of compression-driven segregated condensed PS domains, and (ii) facilitating intermixing of liquid-expanded and tilted-condensed domains. However, the total surface area occupied by a highly condensed phase, presumably enriched in the highly surface tension-reducing dipalmitoylphosphatidylcholine, remained constant upon exposure to LPNs. These results suggest that surface-active LPNs influence the lateral structure of PS during translocation from the interface into the subphase, but LPNs do apparently not affect the biophysical function of PS under physiologically relevant conditions.

Insights into the mechanisms of interaction between inhalable lipid-polymer hybrid nanoparticles and pulmonary surfactant

Pulmonary delivery of small interfering RNA (siRNA) using nanoparticle-based delivery systems is promising for local treatment of respiratory diseases. We designed dry powder inhaler formulations of siRNA-loaded lipid-polymer hybrid nanoparticles (LPNs) with aerosolization properties optimized for inhalation therapy. Interactions between LPNs and pulmonary surfactant (PS) determine the fate of inhaled LPNs, but interaction mechanisms are unknown. Here we used surface-sensitive techniques to study how physicochemical properties and pathological microenvironments influence interactions between siRNA-loaded LPNs and supported PS layers. PS was deposited on SiO₂ surfaces as single bilayer or multilayers and characterized using quartz crystal microbalance with dissipation monitoring and Fourier-transform infrared spectroscopy with attenuated total reflection. Immobilization of PS as multilayers, resembling the structural PS organization in the alveolar subphase, effectively reduced the relative importance of interactions between PS and the underlying surface. However, the binding affinity between PS and LPNs was identical in the two models. The physicochemical LPN properties influenced the translocation pathways and retention time of LPNs. Membrane fluidity and electrostatic interactions were decisive for the interaction strength between LPNs and PS. Experimental conditions reflecting pathological microenvironments promoted LPN deposition. Hence, these results shed new light on design criteria for LPN transport through the air-blood barrier.

Lung surfactant as a biophysical assay for inhalation toxicology

Lung surfactant (LS) is a mixture of lipids and proteins that forms a thin film at the gas-exchange surfaces of the alveoli. The components and ultrastructure of LS contribute to its biophysical and biochemical functions in the respiratory system, most notably the lowering of surface tension to facilitate breathing mechanics. LS inhibition can be caused by metabolic deficiencies or the intrusion of endogenous or exogenous substances. While LS has been sourced from animals or synthesized for clinical therapeutics, the biofluid mixture has also gained recent interest as a biophysical model for inhalation toxicity. Various methods can be used to evaluate LS function quantitatively or qualitatively after exposure to potential toxicants. A narrative review of the recent literature was conducted. Studies focused whether LS was inhibited by various environmental contaminants, nanoparticles, or manufactured products. A review is also conducted on synthetic lung surfactants (SLS), which have emerged as a promising alternative to conventional animal-sourced LS. The intrinsic advantages and recent advances of SLS make a strong case for more widespread usage in LS-based toxicological assays.

Effect of 1-alkyl-1-methylpiperidinium bromides on lipids of fungal plasma membrane and lung surfactant

This study aimed to investigate the potential of 1-alkyl-1-methylpiperidinium bromides as fungicides and evaluate their impact on the human respiratory system when spread in the atmosphere. We investigated the behavior of membrane lipids and model membranes in the presence of a series of amphiphilic 1-alkyl-1-methylpiperidinium bromides ([MePipC_n][Br]), differing in the alkyl chain length (n = 4 - 18). The experiments were performed with the Langmuir monolayer technique using 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and ergosterol (ERG)-the main components of lung surfactant and fungal plasma membrane, respectively and their mixtures with phospholipids and sterols. The mixtures were chosen as the representatives of target and non-target organisms. The surface pressure-area isotherms were obtained by compressing monolayers in the presence of [MePipC_n][Br] in the subphase. The results were analyzed in terms of area expansion/contraction and compressibility. The surface activity of the studied organic salts was also studied. In addition, the monolayers were deposited on a solid surface and their topography was investigated using atomic force microscopy. This research implies that the studied compounds may destabilize efficiently the fungal plasma membrane. At the same time we demonstrated the significant impact of 1-alkyl-1-methylpiperidinium bromides on the lung surfactant layer. The interaction between [MePipCn][Br] and model membranes depends on the concentration and alkyl chain length of organic salt. The key role of contact time has been also revealed. The results may be helpful in the reasonable development of new agrochemical products aiming at the treatment of fungal infections in plants. In addition, our study indicates the significance of proper safety management while spreading the fungicides in the environment.

Fluid Films as Models for Understanding the Impact of Inhaled Particles in Lung Surfactant Layers

Pollution is currently a public health problem associated with different cardiovascular and respiratory diseases. These are commonly originated as a result of the pollutant transport to the alveolar cavity after their inhalation. Once pollutants enter the alveolar cavity, they are deposited on the lung surfactant (LS) film, altering their mechanical performance which increases the respiratory work and can induce a premature alveolar collapse. Furthermore, the interactions of pollutants with LS can induce the formation of an LS corona decorating the pollutant surface, favoring their penetration into the bloodstream and distribution along different organs. Therefore, it is necessary to understand the most fundamental aspects of the interaction of particulate pollutants with LS to mitigate their effects, and design therapeutic strategies. However, the use of animal models is often invasive, and requires a careful examination of different bioethics aspects. This makes it necessary to design in vitro models mimicking some physico-chemical aspects with relevance for LS performance, which can be done by exploiting the tools provided by the science and technology of interfaces to shed light on the most fundamental physico-chemical bases governing the interaction between LS and particulate matter. This review provides an updated perspective of the use of fluid films of LS models for shedding light on the potential impact of particulate matter in the performance of LS film. It should be noted that even though the used model systems cannot account for some physiological aspects, it is expected that the information contained in this review can contribute on the understanding of the potential toxicological effects of air pollution.

Mechanistic Understanding from Molecular Dynamics in Pharmaceutical Research 2: Lipid Membrane in Drug Design

We review the use of molecular dynamics (MD) simulation as a drug design tool in the context of the role that the lipid membrane can play in drug action, i.e., the interaction between candidate drug molecules and lipid membranes. In the standard "lock and key" paradigm, only the interaction between the drug and a specific active site of a specific protein is considered; the environment in which the drug acts is, from a biophysical perspective, far more complex than this. The possible mechanisms though which a drug can be designed to tinker with physiological processes are significantly broader than merely fitting to a single active site of a single protein. In this paper, we focus on the role of the lipid membrane, arguably the most important element outside the proteins themselves, as a case study. We discuss work that has been carried out, using MD simulation, concerning the transfection of drugs through membranes that act as biological barriers in the path of the drugs, the behavior of drug molecules within membranes, how their collective behavior can affect the structure and properties of the membrane and, finally, the role lipid membranes, to which the vast majority of drug target proteins are associated, can play in mediating the interaction between drug and target protein. This review paper is the second in a two-part series covering MD simulation as a tool in pharmaceutical research; both are designed as pedagogical review papers aimed at both pharmaceutical scientists interested in exploring how the tool of MD simulation can be applied to their research and computational scientists interested in exploring the possibility of a pharmaceutical context for their research.

Polyhydroxyalkanoate Nanoparticles for Pulmonary Drug Delivery: Interaction with Lung Surfactant

Polyhydroxyalkanoates (PHA) are polyesters produced intracellularly by many bacterial species as energy storage materials, which are used in biomedical applications, including drug delivery systems, due to their biocompatibility and biodegradability. In this study, we evaluated the potential application of this nanomaterial as a basis of inhaled drug delivery systems. To that end, we assessed the possible interaction between PHA nanoparticles (NPs) and pulmonary surfactant using dynamic light scattering, Langmuir balances, and epifluorescence microscopy. Our results demonstrate that NPs deposited onto preformed monolayers of DPPC or DPPC/POPG bind these surfactant lipids. This interaction facilitated the translocation of the nanomaterial towards the aqueous subphase, with the subsequent loss of lipid from the interface. NPs that remained at the interface associated with liquid expanded (LE)/tilted condensed (TC) phase boundaries, decreasing the size of condensed domains and promoting the intermixing of TC and LE phases at submicroscopic scale. This provided the stability necessary for attaining high surface pressures upon compression, countering the destabilization induced by lipid loss. These effects were observed only for high NP loads, suggesting a limit for the use of these NPs in pulmonary drug delivery.

An adverse outcome pathway for lung surfactant function inhibition leading to decreased lung function

Inhaled substances, such as consumer products, chemicals at the workplace, and nanoparticles, can affect the lung function in several ways. In this paper, we explore the adverse outcome pathway (AOP) that starts when inhaled substances that reach the alveoli inhibit the function of the lung surfactant, and leads to decreased lung function. Lung surfactant covers the inner surface of the alveoli, and regulates the surface tension at the air-liquid interface during breathing. The inhibition of the lung surfactant function leads to alveolar collapse because of the resulting high surface tension at the end of expiration. The collapsed alveoli can be re-opened by inspiration, but this re-opening causes shear stress on cells covering the alveoli. This can damage the alveolar-capillary membrane integrity, allowing blood components to enter the alveolar airspace. Blood components, such as albumin, can interact with the lung surfactant and further inhibit its function. The collapse of the alveoli is responsible for a decrease in the surface area available for blood oxygenation, and it reduces the volume of air that can be inhaled and exhaled. These different key events lead to decreased lung function, characterized by clinical signs of respiratory toxicity and reduced blood oxygenation. Here we present the weight of evidence that supports the AOP, and we give an overview of the methods available in vitro and in vivo to measure each key event of the pathway, and how this AOP can potentially be used in screening for inhalation toxicity.

In vitro prediction of clinical signs of respiratory toxicity in rats following inhalation exposure

To date there are no OECD validated alternative approaches to study toxicity following inhalation exposure to airborne chemicals. The available OECD test guidelines for acute inhalation toxicity aim to estimate a value of the lethal air concentration of the test chemical leading to the death of 50% of the exposed animals (LC50), to satisfy hazard classification and labelling requirements. This paper explores the view that alternative approaches must compare to outcomes of existing guideline methods to become accepted and implemented in a regulatory context. This case study describes the initiatives taken to validate the lung surfactant bioassay, an in vitro cell-free method, and discusses the challenges faced. While the lung surfactant bioassay could not predict the GHS classification for acute inhalation toxicity of 26 chemicals, the assay successfully predicted the clinical signs of respiratory toxicity observed during or shortly after exposure in vivo as reported in registration dossiers. The lung surfactant bioassay is a promising alternative approach to assess the potential of chemicals to cause changes to respiration remaining after exposure (indicating decreased lung function), and can be combined with other test methods in an integrated approach to testing and assessment of inhaled substances.