Green synthesis of iron nanoparticles by Rosemary extract and cytotoxicity effect evaluation on cancer cell lines

Nanostructured Mn@NiO composite for addressing multi-pollutant challenges in petroleum-contaminated water

Efficient catalysts play a pivotal role in advancing eco-friendly water treatment strategies, particularly in the removal of diverse organic contaminants found in water-petroleum sources. This study addresses the multifaceted challenges posed by contaminants, encompassing a spectrum of heavy metals such as As, Cd, Cr, Mn, Mo, Ni, Pb, Sb, Se, and Zn alongside pollutants like oily water (OIW), total suspended solids (TSS), chemical oxygen demand (COD), dyes, and pharmaceuticals, posing threats to both aquatic and terrestrial ecosystems. Herein, we present the synthesis of biogenically derived Mn@NiO nanocomposite (NC) photocatalysts, a sustainable methodology employing an aqueous Rosmarinus officinalis L. extract, yielding particles with a size of 36.7 nm. The catalyst demonstrates exceptional efficacy in removing heavy metals, achieving rates exceeding 99-100% within 30 min, alongside notable removal efficiencies for OIW (98%), TSS (87%), and COD (98%). Furthermore, our photodegradation experiments showed remarkable efficiencies, with 94% degradation for Rose Bengal (RB) and 96% for methylene blue (MB) within 120 min. The degradation kinetics adhere to pseudo-first-order behavior, with rate constants of 0.0227 min-1 for RB and 0.0370 min-1 for MB. Additionally, the NC exhibits significant antibiotic degradation rates of 97% for cephalexin (CEX) and 96% for amoxicillin (AMOX). The enhanced photocatalytic performance is attributed to the synergistic interplay between the Mn and NiO nanostructures, augmenting responsiveness to sunlight while mitigating electron-hole pair recombination. Notably, the catalyst demonstrates outstanding stability and reusability across multiple cycles, maintaining its stable nanostructure without compromise.

Metallic Nanocarriers for Therapeutic Peptides: Emerging Solutions Addressing the Delivery Challenges in Brain Ailments

Peptides and proteins have recently emerged as efficient therapeutic alternatives to conventional therapies. Although they emerged a few decades back, extensive exploration of various ailments or disorders began recently. The drawbacks of current chemotherapies and irradiation treatments, such as drug resistance and damage to healthy tissues, have enabled the rise of peptides in the quest for better prospects. The chemical tunability and smaller size make them easy to design selectively for target tissues. Other remarkable properties include antifungal, antiviral, anti-inflammatory, protection from hemorrhage stroke, and as therapeutic agents for gastric disorders and Alzheimer and Parkinson diseases. Despite these unmatched properties, their practical applicability is often hindered due to their weak susceptibility to enzymatic digestion, serum degradation, liver metabolism, kidney clearance, and immunogenic reactions. Several methods are adapted to increase the half-life of peptides, such as chemical modifications, fusing with Fc fragment, change in amino acid composition, and carrier-based delivery. Among these, nanocarrier-mediated encapsulation not only increases the half-life of the peptides in vivo but also aids in the targeted delivery. Despite its structural complexity, they also efficiently deliver therapeutic molecules across the blood-brain barrier. Here, in this review, we tried to emphasize the possible potentiality of metallic nanoparticles to be used as an efficient peptide delivery system against brain tumors and neurodegenerative disorders. SIGNIFICANCE STATEMENT: In this review, we have emphasized the various therapeutic applications of peptides/proteins, including antimicrobial, anticancer, anti-inflammatory, and neurodegenerative diseases. We also focused on these peptides' challenges under physiological conditions after administration. We highlighted the importance and potentiality of metallic nanocarriers in the ability to cross the blood-brain barrier, increasing the stability and half-life of peptides, their efficiency in targeting the delivery, and their diagnostic applications.

Green and low-temperature synthesis of the magnetic modified biochar under the air atmosphere for the adsorptive removal of heavy metal ions from wastewater: CCD-RSM experimental design with isotherm, kinetic, and thermodynamic studies

The accumulation of heavy metal ions in living cells leads to biological damage, which makes the necessity of using new methods to effectively remove heavy metal ions from the environment more vital. In this work, a magnetic modified biochar was prepared under regular air atmosphere and low temperature (220 ºC) and used as a low-cost and green adsorbent for efficient adsorptive removal of cobalt (Co(II)) and Lead (Pb(II)) ions from contaminated waters. The adsorption process was modeled and optimized using CCD-RSM to maximize the removal efficiency of heavy metal ions, as well as was monitored in detail by isotherm, kinetic, and thermodynamic studies. The results show that the Langmuir maximum adsorption capacity of the adsorbent reached 237.92 mg g-1 (single) and 121.23 mg g-1 (binary) for Co(II) and 207.21 mg g-1 (single) and 106.56 mg g-1 (binary) for Pb(II) under the short time of 25 min and solution pH of 6.0. The kinetic studies revealed that the pseudo-first-order model was the best-fitted model to experimental data and indicated that the adsorption process was mostly through chemisorption. Also, thermodynamic studies showed that that adsorptive removal of Co(II)and Pb(II)ions followed an endothermic and spontaneous process. The reusability studies demonstrated that the adsorbent could be successfully regenerated with 5 mL of 0.1 mol L-1 HNO3 solution, and the adsorption efficiency was retaining about 90% after four adsorption-desorption cycles. Also, the results from using real water samples, including drinking water, groundwater, and river water, implied that the synthesized magnetic modified biochar was highly efficient for practical treatment processes. Overall, the results indicated that the proposed magnetic biochar can be considered as a cost-effective and efficient adsorbent for adsorptive removal of heavy metal ions from contaminated waters.

Optimization of electrospun CQDs-Fe3O4-RE loaded PVA-cellulose nanofibrils via central composite design for wound dressing applications: Kinetics and in vitro release study

Wound skin infections can cause significant morbidity and even mortality. Cellulose nanofibrils (CNFs) are a type of nano cellulose that have reached notable attention due to their inimitable properties. In this study, in order to prepare a novel wound dressing, CNFs are composited with poly (vinyl alcohol) (PVA) to enhance mechanical properties and increase cell proliferation and migration. Also, carbon quantum dots (CQDs)- Fe₃O₄ was introduced as a novel antibacterial, and rosemary extract (RE) was composited with this to reduce its cell toxicity. PVA - CNFs/ CQDs- Fe₃O₄- RE nanofiber was prepared using the electrospinning method. Then, to maximize tensile strength, total elongation, and percentage swelling of PVA - CNFs/ CQDs- Fe₃O₄- RE electrospun nanofiber, parameters of crosslinking duration and the concentration of CQDs- Fe₃O₄-RE were optimized employing central composite design, and optimized electrospun nanofiber (OEN) as a novel wound dressing was prepared. Results exhibited, the high antibacterial properties of CQDs-Fe₃O₄-RE. Also, CNFs and CQDs- Fe₃O₄-RE increased the tensile strength of OEN. Moreover, CNFs and RE reduce wound area percentages and increase the percentage of cell viability, respectively. Therefore, OEN was introduced as a suitable wound dressing due to its appropriate surface roughness, mechanical properties, WVTR, biodegradation, prolonged release, non-toxicity, and high cell proliferation and migration ability.

Current Trends and Prospects for Application of Green Synthesized Metal Nanoparticles in Cancer and COVID-19 Therapies

Cancer and COVID-19 have been deemed as world health concerns due to the millions of lives that they have claimed over the years. Extensive efforts have been made to develop sophisticated, site-specific, and safe strategies that can effectively diagnose, prevent, manage, and treat these diseases. These strategies involve the implementation of metal nanoparticles and metal oxides such as gold, silver, iron oxide, titanium oxide, zinc oxide, and copper oxide, formulated through nanotechnology as alternative anticancer or antiviral therapeutics or drug delivery systems. This review provides a perspective on metal nanoparticles and their potential application in cancer and COVID-19 treatments. The data of published studies were critically analysed to expose the potential therapeutic relevance of green synthesized metal nanoparticles in cancer and COVID-19. Although various research reports highlight the great potential of metal and metal oxide nanoparticles as alternative nanotherapeutics, issues of nanotoxicity, complex methods of preparation, biodegradability, and clearance are lingering challenges for the successful clinical application of the NPs. Thus, future innovations include fabricating metal nanoparticles with eco-friendly materials, tailor making them with optimal therapeutics for specific disease targeting, and in vitro and in vivo evaluation of safety, therapeutic efficiency, pharmacokinetics, and biodistribution.

Application of Iron Nanoparticle-Based Materials in the Food Industry

Due to their different properties compared to other materials, nanoparticles of iron and iron oxides are increasingly used in the food industry. Food technologists have especially paid attention to their ease of separation by magnetic fields and biocompatibility. Unfortunately, the consumption of increasing amounts of nanoparticles has raised concerns about their biotoxicity. Hence, knowledge about the applicability of iron nanoparticle-based materials in the food industry is needed not only among scientists, but also among all individuals who are involved in food production. The first part of this article describes typical methods of obtaining iron nanoparticles using chemical synthesis and so-called green chemistry. The second part of this article describes the use of iron nanoparticles and iron nanoparticle-based materials for active packaging, including the ability to eliminate oxygen and antimicrobial activity. Then, the possibilities of using the magnetic properties of iron nano-oxides for enzyme immobilization, food analysis, protein purification and mycotoxin and histamine removal from food are described. Other described applications of materials based on iron nanoparticles are the production of artificial enzymes, process control, food fortification and preserving food in a supercooled state. The third part of the article analyzes the biocompatibility of iron nanoparticles, their impact on the human body and the safety of their use.

New Green Approaches in Nanoparticles Synthesis: An Overview

Nanotechnology is constantly expanding, with nanomaterials being more and more used in common commercial products that define our modern life. Among all types of nanomaterials, nanoparticles (NPs) occupy an important place, considering the great amount that is produced nowadays and the diversity of their applications. Conventional techniques applied to synthesize NPs have some issues that impede them from being appreciated as safe for the environment and health. The alternative to these might be the use of living organisms or biological extracts that can be involved in the green approach synthesis of NPs, a process that is free of harmful chemicals, cost-effective and a low energy consumer. Several factors, including biological reducing agent concentration, initial precursor salt concentration, agitation, reaction time, pH, temperature and light, can influence the characteristics of biologically synthesized NPs. The interdependence between these reaction parameters was not explored, being the main impediment in the implementation of the biological method on an industrial scale. Our aim is to present a brief review that focuses on the current knowledge regarding how the aforementioned factors can control the size and shape of green-synthesized NPs. We also provide an overview of the biomolecules that were found to be suitable for NP synthesis. This work is meant to be a support for researchers who intend to develop new green approaches for the synthesis of NPs.

Methods for Green Synthesis of Metallic Nanoparticles Using Plant Extracts and their Biological Applications - A Review

Nanotechnology, a fast-developing branch of science, is gaining extensive popularity among researchers simply because of the multitude of applications it can offer. In recent years, biological synthesis has been widely used instead of physical and chemical synthesis methods, which often produce toxic products. These synthesis methods are now being commonly adapted to discover new applications of nanoparticles synthesized using plant extracts. In this review, we elucidate the various ways by which nanoparticles can be biologically synthesized. We further discuss the applications of these nanoparticles.

Synergistic Silencing of Skp2 by siRNA Self-Assembled Nanoparticles as a Therapeutic Strategy for Advanced Prostate Cancer

Advanced prostate cancer, harboring multiple mutations of tumor suppressor genes, is refractory to conventional therapies. Knockout of the Skp2 gene blocks pRb/p53 doubly deficient prostate cancer in mice, which inspired the authors to develop an approach for delivering siRNA that would efficiently silence Skp2 (siSkp2) in vivo. Here, a facile strategy is reported to directly assemble siSkp2 with the natural compound quercetin (Que) into supramolecular nanoparticles (NPs). This carrier-free siSkp2 delivery system could effectively protect siSkp2 from degradation in serum and enhance its cellular internalization. Furthermore, the siSkp2/Que NPs exhibit synergistic effects in Skp2 silencing, because they can degrade the mRNA and protein of Skp2 simultaneously. Indeed, siSkp2/Que NPs remarkably diminish the Skp2 abundance and further inhibit the proliferation and migration of TMU cells (RB1/TP53/KRAS triple mutations) in vitro. The in vivo results further show that i.v. administration of siSkp2/Que NPs efficiently accumulates in tumor sites and strongly inhibits the growth of TMU tumors in nude mice. Importantly, the siSkp2/Que NPs do not induce any abnormality in the treated mice, which suggests satisfactory biocompatibility. Collectively, this study describes a tractable siRNA self-assembled strategy for Skp2 silencing, which might be a promising nanodrug to cure multitherapy-resistant advanced prostate cancer.

Possibility of Pulsed Electric Field and Essential Oil Pre-treatment, Microwave-air Dehydration to the Quality of the Dehydrated Sesban (Sesbania sesban) Flower

Non-heat ahead-treatment in advance of the main dehydration is essential to preserve the quality and ensure food safety. Pulsed electric field (PEF) utilizes a high-voltage electric field in a very short duration to inhibit microbes and enzymes while maintaining the most sensory and nutritional characteristics. For thermal sensitive components, the dehydration process should be performed at low temperatures. Freeze dehydration, vacuum dehydration required high cost for equipment, energy consumption, low quantity in long dehydration time. Microwave-air dehydration is considered as a promising alternative technical approach. Sesban (Sesbania sesban) flower contains numerous phytochemical components promoting health-benefit. However, it’s highly perishable after harvesting. Consumers enjoy the dried sesban flower as a healthy drink. This study examined the possibility of PEF ahead-treatment in microbial inhibition and enzymatic inactivation; essential oil and Microwave-air dehydration on retention of total phenolic content (TPC), vitamin C, 2,2 diphenyl-1-picrylhydrazyl of free radical scavenging (DPPH), ferric reducing antioxidant power (FRAP) of the dehydrated sesban flower. Research also monitored the microbial stability of the dehydrated sesban flower during 12 months of preservation. Results showed that PEF at pulse strength 1000 kV/cm, pulse duration 90 µs, pulse number 45 was remarkably inactivated polyphenol oxidase and peroxidase in raw material. Rosemary essential oil soaked for sesban flower before dehydration positively preserved the ascorbic acid, phenolic content and antioxidant capacity. These PEF and essential oil ahead-treatments strongly facilitated for the main Microwave-air dehydration. Among different air temperatures from 20°C to 40°C in microwave-air dehydration, the highest Vitamin C, TPC, DPPH and FRAP of the dried flower were recorded at air temperature from 20°C to 30°C with no significant difference. Meanwhile, airspeed 1.2 m/s showed the highest Vitamin C, TPC, DPPH and FRAP of the dried flower with no significant difference with airspeed 1.4 m/s and 1.6 m/s. There was no significant difference in Vitamin C, TPC, DPPH and FRAP of the dried flower by microwave power from 1.15 to 1.45W/g. Therefore, a combination of microwave and air dehydration at air temperature 25°C, airspeed 1.2 m/s, the microwave energy density of 1.45 W/g was recommended to better preserve vitamin C, TPC, DPPH, FRAP. Microbial stability of the dehydrated flower was also observed during 12 months of storage by 3 month-interval sampling. Coliform, yeast and mold criteria in dried product were stable within acceptable limits.

Green Synthesis of Metallic Nanoparticles: Applications and Limitations

The past decade has witnessed a phenomenal rise in nanotechnology research due to its broad range of applications in diverse fields including food safety, transportation, sustainable energy, environmental science, catalysis, and medicine. The distinctive properties of nanomaterials (nano-sized particles in the range of 1 to 100 nm) make them uniquely suitable for such wide range of functions. The nanoparticles when manufactured using green synthesis methods are especially desirable being devoid of harsh operating conditions (high temperature and pressure), hazardous chemicals, or addition of external stabilizing or capping agents. Numerous plants and microorganisms are being experimented upon for an eco–friendly, cost–effective, and biologically safe process optimization. This review provides a comprehensive overview on the green synthesis of metallic NPs using plants and microorganisms, factors affecting the synthesis, and characterization of synthesized NPs. The potential applications of metal NPs in various sectors have also been highlighted along with the major challenges involved with respect to toxicity and translational research.

One-pot green synthesis of iron oxide nanoparticles from Bauhinia tomentosa: Characterization and application towards synthesis of 1, 3 diolein

The green synthesis of NPs through plant extracts can be a modest, one-pot alternative synthesis to the conventional physical or chemical method. The prime focus of this study is to produce MNPs by the reducing effect of Bauhinia tomentosa leaf extract, and it was immobilized in porcine pancreatic lipase (PPL). Synthesized NPs were characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD) and Raman spectroscopy, UV-Vis Spectrometry, Thermogravimetry, and Differential Scanning Calorimeter (DSC), Zeta potential test, VSM, BET and Fourier Transform Infrared Spectroscopy (FTIR). The effect of process parameters was studied, about the efficiency of immobilization are enzyme stability, the extent of enzyme reusability, its separation from products, the activity of immobilized enzyme, recovery, and its loss. Finally, the immobilized lipase was used for the synthesis of 1,3-diolein using enzyme-mediated esterification of oleic acid and glycerol. Under optimized condition (reaction temp-55 [Formula: see text]C; molar ratio-2.5:1; pH-7) diolein yield was achieved to be 94%. Therefore, this work was further used for the industrial production of 1,3-diacylglycerol since a perfect enzyme-catalyzed process was observed.

Magnetic cobalt oxide nanosheets: green synthesis and in vitro cytotoxicity

Cobalt oxide nanoparticles were prepared via green chemistry route and fully characterized by Field Emission Scanning Electron Microscope (FESEM), Energy-dispersive X-ray spectroscopy (EDAX), X-ray diffraction (XRD), High-resolution transmission electron microscopy (HRTEM) and Transmission electron microscopy (TEM) analyses; the CoO and Co₃O₄ nanoparticles, in sheet-shaped cobalt oxide form, ensued simultaneously in one step. The varying concentrations of NPs were analyzed via 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) test on the cancer cell line (U87) which revealed that with increasing concentration of cobalt oxide nanoparticles, the survival rate of U87 tumor cells decreases; IC₅₀ of nanoparticles being ~ 55 µg/ml^-1.

Green Synthesis of Magnetic Nanoparticles Using Satureja hortensis Essential Oil toward Superior Antibacterial/Fungal and Anticancer Performance

The biological synthesis of nanoparticles, due to their environmental and biomedical properties, has been of particular interest to scientists and physicians. Here, iron nanoparticles (FeNPs) were synthesized using Satureja hortensis essential oil. Then, the chemical, functional, and morphological properties of these nanoparticles were characterized by typical experiments such as Uv-Vis, FTIR, XRD, FE-SEM, PSA, zeta potential, EDX, and EDX mapping. The results indicated Fe nanoparticles' formation with a cubic morphological structure and a particle size in the range of 9.3-27 nm. The antimicrobial effects of these nanoparticles were further evaluated using disc diffusion, minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC), and minimum fungal concentration (MFC) against two gram-positive bacterial strains (Staphylococcus aureus and Corynebacterium glutamicum), two gram-negative bacterial strains (Pseudomonas aeruginosa and Escherichia coli), and one fungus species Candida albicans. The results showed that green-synthesized Fe nanoparticles possessed higher antimicrobial properties than Satureja hortensis essential oil against selected pathogenic microorganisms, especially Gram-negative bacteria. Finally, the anticancer effect of these Fe nanoparticles was investigated on human cancer cells, K-562, and MCF-7, by the MTT assay. The results showed the anticancer effect of these nanoparticles against selected cell lines.

Zn, Cu, and Fe Concentrations in Dehydrated Herbs (Thyme, Rosemary, Cloves, Oregano, and Basil) and the Correlation with the Microbial Counts of Listeria monocytogenes and Other Foodborne Pathogens

Zn, Cu, and Fe concentrations were measured in dehydrated herbs (thyme, rosemary, cloves, oregano, and basil) marketed in bulk or packaged in glass or polyethylene terephthalate (PET). Microbial counts of Listeria monocytogenes and other five foodborne pathogens were also checked when herbs were previously added to the growing media. The highest mean concentrations were found in basil for Zn and Cu, and in thyme and basil for Fe; the lowest ones for these minerals were in cloves (p < 0.05). Basil had significantly higher microbial counts in five of the six foodborne pathogens studied (p < 0.05). Cloves have the best hygienic quality as there is no microbial growth of L. monocytogenes, Clostridium perfringens, and Bacillus cereus; they therefore could be used as a natural preservative in food. Aromatic herbs marketed in bulk showed a significantly higher microbial count (p < 0.05). Zn, Cu, and Fe concentrations were positively correlated with microbial growth for L. monocytogenes, C. perfringens, B. cereus, and psychrophilic microorganisms (p < 0.05), so they could act as a growing factor for the foodborne pathogens.

Bio-synthesized iron oxide nanoparticles for cancer treatment

Various living organisms, such as bacteria, plants, and animals can synthesize iron oxide nanoparticles (IONP). The mechanism of nanoparticle (NP) formation is usually described as relying on the reduction of ferric/ferrous iron ions into crystallized nanoparticulate iron that is surrounded by an organic stabilizing layer. The properties of these NP are characterized by a composition made of different types of iron oxide whose most stable and purest one appears to be maghemite, by a size predominantly comprised between 5 and 380 nm, by a crystalline core, by a surface charge which depends on the nature of the material coating the iron oxide, and by certain other properties such as a sterility, stability, production in mass, absence of aggregation, that have apparently only been studied in details for IONP synthesized by magnetotactic bacteria, called magnetosomes. In the majority of studies, bio-synthesized IONP are described as being biocompatible and as not inducing cytotoxicity towards healthy cells. Anti-tumor activity of bio-synthesized IONP has mainly been demonstrated in vitro, where this type of NP displayed cytotoxicity towards certain tumor cells, e.g. through the anti-tumor activity of IONP coating or through IONP anti-oxidizing property. Concerning in vivo anti-tumor activity, it was essentially highlighted for magnetosomes administered in different types of glioblastoma tumors (U87-Luc and GL-261), which were exposed to a series of alternating magnetic field applications, resulting in mild hyperthermia treatments at typical temperatures of 41-45 °C, leading to the full disappearance of these tumors without any observable side effects.

Natural Metallic Nanoparticles for Application in Nano-Oncology

Here, the various types of naturally synthesized metallic nanoparticles, which are essentially composed of Ce, Ag, Au, Pt, Pd, Cu, Ni, Se, Fe, or their oxides, are presented, based on a literature analysis. The synthesis methods used to obtain them most often involve the reduction of metallic ions by biological materials or organisms, i.e., essentially plant extracts, yeasts, fungus, and bacteria. The anti-tumor activity of these nanoparticles has been demonstrated on different cancer lines. They rely on various mechanisms of action, such as the release of chemotherapeutic drugs under a pH variation, nanoparticle excitation by radiation, or apoptotic tumor cell death. Among these natural metallic nanoparticles, one type, which consists of iron oxide nanoparticles produced by magnetotactic bacteria called magnetosomes, has been purified to remove endotoxins and abide by pharmacological regulations. It has been tested in vivo for anti-tumor efficacy. For that, purified and stabilized magnetosomes were injected in intracranial mouse glioblastoma tumors and repeatedly heated under the application of an alternating magnetic field, leading to the full disappearance of these tumors. As a whole, the results presented in the literature form a strong basis for pursuing the efforts towards the use of natural metallic nanoparticles for cancer treatment first pre-clinically and then clinically.

Multifarious Pharmacological Applications of Green Routed Eco-Friendly Iron Nanoparticles Synthesized by Streptomyces Sp. (SRT12)

A simple, eco-friendly, green routine co-precipitation method was experimented to synthesize iron nanoparticles (Fe-NPs) using the cell-free supernatant of actinobacteria. The biosynthesized nanoparticles were characterized by UV-Vis spectroscopy, X-ray diffractometer (XRD), energy-dispersive X-ray (EDX), scanning electron microscopy (SEM), atomic force microscopy (AFM), zeta potential analyser and Fourier transform infrared (FTIR) spectroscopy. The synthesized nanoparticles were crystalline, quasi-spherical in shape and their average size ranged from 65.0 to 86.7 nm. In our radical scavenging assays, the nanoparticles have revealed a strong antioxidant activity with respective standard ascorbic acid. The nanoparticles also exhibited a wide bactericidal action on pathogens namely Bacillus subtilis, Staphylococcus aureus, Klebsiella pneumoniae, Shigella flexneri and Escherichia coli. At 75 μg/ml concentration, the nanoparticles showed the highest inhibition against S. aureus (16.2 ± 0.45 mm), the lowest zone of inhibition was seen against K. pneumoniae (12.3 ± 0.50 mm) and moderate inhibition on other strains. Further, its cytotoxicity was seen as effective against DU145 and PC3 cells. The morphological changes caused in the prostate cell lines due to antiproliferative effect were observed through DAPI and AO/EB staining. This synthesis method specifies a new route for biosynthesis of Fe-NPs and the accomplished results illustrates that it can be used for a wide range of biomedical applications.