Decolorization and degradation of methyl orange by Bacillus stratosphericus SCA1007

A hybrid electrocoagulation-biocomposite adsorption system for the decolourization of dye wastewater

Among the various methods for the removal of azo dye, electrocoagulation is recognized to be highly efficient. However, the process is associated with high operation and maintenance cost, which demands the need for reducing the electrolysis time without compromising the performance efficiency. This can be achieved by adopting hybrid electrocoagulation process with a low-cost but effective process, such as adsorption. The study investigated the performance of a hybrid electrocoagulation-biocomposite system (H-EC-BC) for removing methyl orange dye. Firstly, the operating parameters of electrocoagulation process were optimized and a removal efficiency of 99% has been attained using Fe-SS electrodes at a pH of 6 for a reaction time of 30 min. The performance of EC process was found to be decreasing with increase in dye concentration. Secondly, biocomposite was synthesized from Psidium guajava leaves and characterized using SEM, FTIR, EDAX, and XRD analyses. The results suggested that it is having a porous nature and cellulose crystal structure and confirmed the presence of chemical elements such as carbon (65.2%), oxygen (29.1%) as primary with Fe, Cl, Na and Ca as secondary elements. The performance of the biocomposite was evaluated for the dye adsorption using spectrophotometric methods. Various operating parameters were optimized using experimental methods and a maximum removal efficiency of 65% was achieved at a pH of 6, dosage of 5 g/L and an adsorption contact time of 120 min. The maximum efficiency (92.78%) was obtained with Fe-SS electrodes and KCl as a sustaining electrolyte under acidic circumstances (pH 6). The biocomposite was observed to be more efficient for higher dye concentration. Langmuir and Freundlich adsorption isotherms were fitted with the experimental results with R2 values as 0.926 and 0.980 respectively. The adsorption kinetics were described using Pseudo-first and Pseudo-second order models, wherein Pseudo-second order model fits the experimental results with R2 value of 0.999. The energy consumption of electrocoagulation (EC) process in the hybrid H-EC-BC system was compared to that of a standard EC process. The results demonstrated that the hybrid system is approximately 7 times more energy efficient than the conventional process, thereby implicating its adaptability for field application.

Exploring the decolorization efficiency and biodegradation mechanisms of different functional textile azo dyes by Streptomyces albidoflavus 3MGH

Efficiently mitigating and managing environmental pollution caused by the improper disposal of dyes and effluents from the textile industry is of great importance. This study evaluated the effectiveness of Streptomyces albidoflavus 3MGH in decolorizing and degrading three different azo dyes, namely Reactive Orange 122 (RO 122), Direct Blue 15 (DB 15), and Direct Black 38 (DB 38). Various analytical techniques, such as Fourier Transform Infrared (FTIR) spectroscopy, High-Performance Liquid Chromatography (HPLC), and Gas Chromatography-Mass Spectrometry (GC-MS) were used to analyze the degraded byproducts of the dyes. S. albidoflavus 3MGH demonstrated a strong capability to decolorize RO 122, DB 15, and DB 38, achieving up to 60.74%, 61.38%, and 53.43% decolorization within 5 days at a concentration of 0.3 g/L, respectively. The optimal conditions for the maximum decolorization of these azo dyes were found to be a temperature of 35 °C, a pH of 6, sucrose as a carbon source, and beef extract as a nitrogen source. Additionally, after optimization of the decolorization process, treatment with S. albidoflavus 3MGH resulted in significant reductions of 94.4%, 86.3%, and 68.2% in the total organic carbon of RO 122, DB 15, and DB 38, respectively. After the treatment process, we found the specific activity of the laccase enzyme, one of the mediating enzymes of the degradation mechanism, to be 5.96 U/mg. FT-IR spectroscopy analysis of the degraded metabolites showed specific changes and shifts in peaks compared to the control samples. GC-MS analysis revealed the presence of metabolites such as benzene, biphenyl, and naphthalene derivatives. Overall, this study demonstrated the potential of S. albidoflavus 3MGH for the effective decolorization and degradation of different azo dyes. The findings were validated through various analytical techniques, shedding light on the biodegradation mechanism employed by this strain.

Adsorption and biodegradation of the azo dye methyl orange using Ralstonia pickettii immobilized in polyvinyl alcohol (PVA)-alginate-hectorite beads (BHec-RP)

Biological methods are widely used to treat dye waste, particularly methyl orange (MO) dye. The importance of MO degradation stems from its classification as a toxic dye. Within the scope of this research, successful bio-decolorization of MO was achieved through the use of Ralstonia pickettii bacteria immobilized in a PVA-alginate-hectorite matrix (BHec-RP). The optimum conditions for the degradation were observed at a composition of PVA (10%), hectorite (1%), static incubation, 40 °C, and pH 7. Subsequently, the adsorption kinetics of BHec-RP (dead cells) as well as the degradation kinetics of BHec-RP (live cells) and MO using free R. pickettii cells were evaluated. The decolorization of MO using BHec-RP (dead cells) is an adsorption process following pseudo-first-order kinetics (0.6918 mg g-1 beads) and occurs in a monolayer or physical process. Meanwhile, the adoption of BHec-RP (live cells) and free R. pickettii cells shows a degradation process under pseudo-first-order kinetics, with the highest rates at an initial MO concentration of 50 mg L-1 being 0.025 mg L-1 h-1 and 0.015 mg L-1 h-1, respectively. These results show that the immobilization system is superior compared to free R. pickettii cells. Furthermore, the degradation process shows the inclusion of several enzymes, such as azoreductase, NADH-DCIP reductase, and laccase, presumed to be included in the fragmentation of molecules. This results in five fragments based on LC-QTOF/MS analysis, with m/z values of 267.12; 189.09; 179.07; 169.09; and 165.05.

Utilization of battery waste derived ZnO in the removal of dye from aqueous solution: A waste to wealth approach

Every year a huge amount of zinc carbon batteries is discarded as waste and the management of such waste has become a growing concern all over the world. However, from these waste carbon batteries different kinds of valuable materials could be recovered. On the other hand, different industries discharged large volumes of dye wastewater into the environment which has a profound impact on environment and as well as human health. In this study, ZnO was recovered from the waste carbon batteries through pyrometallurgy process and utilized it for the treatment of methylene blue and methyl orange dye water. The batch adsorption process was carried out to observe the effect of adsorbent dosage, pH, contact time, stirring speed and temperature. Under the obtained optimal conditions adsorption kinetics (Pseudo-first order and pseudo-second order) and adsorption isotherms (Langmuir, Freundlich and Temkin) were analyzed. The results disclosed that 0.5 g and 0.6 g of ZnO showed maximum removal efficiency for MB and MO dye solution (50 ppm) whereas pH 13 and 6 were the optimal for MB and MO respectively. Kinetic studies indicate that both the adsorption processes were pseudo-second order. It was also revealed that based on regression coefficient R2 value the adsorption of MB and MO on ZnO is followed Langmuir model. Furthermore, the findings revealed that the MO adsorption on ZnO is a chemical adsorption process and MB adsorption is a physical adsorption process.

Improved application of immobilized Enterobacter cloacae into a bio-based polymer for Reactive Blue 19 removal, an eco-friendly advancement in potential decolorizing systems

The widespread use of highly complex synthetic dyes like reactive dyes in the textile industry has some adverse environmental impacts and deserves close attention. Biological treatment of these effluents utilizing various species of bacteria with remarkable efficiency in dye removal is still considered promising. Our current study deals with immobilizing an isolated bacterial strain into calcium alginate (Ca/Alg) gel beads and using it to treat pernicious pollutants like synthetic dyes. A potential Reactive Blue 19 (RB19)-degrading Enterobacter cloacae strain A1 was isolated from the Kashan textile industry and was characterized by 16S rDNA gene sequencing. The decolorization ability of strain A1 was assessed by time-based studies using free bacterial cells/immobilized in Ca/Alg. Based on the results of the 16S rDNA gene sequencing, it appears that strain A1 belonged to E. cloacae, with a 99.74% similarity. The findings suggest that immobilized strain A1 accomplished maximum decolorization activity compared with the free cells. The immobilized strain could utterly decompose and decolorize 0.05 mg/mL of RB19 within 48 h, while the free bacterial strain decolorized RB19 within 5 days. Moreover, Ca/Alg gel beads can maintain their efficiency for over three decolorization cycles. Further infrared spectroscopy (FTIR) and gas chromatograph mass spectrometer (GC/MS) investigation declared complete RB19 decomposition on reaction products. Artemia salina was used to investigate the toxicity of dye and its degraded metabolites. The LC50 values signified the pure dye as very toxic with 0.01 mg/mL concentration, while after-treatment products showed no toxic effect on larvae. This immobilization technique increased the applicability of bacterial strain for dye removal. It was beneficial for the decolorization of RB19 from textile wastewater due to a remarkable reduction in time. Notably, strain A1-immobilized beads can maintain their activity for three consecutive decolorization cycles without a considerable decrease in efficiency. PRACTITIONER POINTS: The remarkable capacity of immobilized Enterobacter cloacae strain A1 for Reactive Blue 19 (RB19) removal Immobilized A1 strain showed two-fold higher removal than free one over 48 h A promising method for enhancing RB19 decolorization Decolorization was due to degradation based on UV-Vis, FTIR, and GC/MS analysis Non-toxic posttreatment products for Artemia.

Evaluation of Bioremediation Potentiality of Bacillus mojavensis Isolated from Wastewater for the Elimination of Reactive Yellow 145 and Methyl Orange

Textile industry waste has become one of the largest polluters in the world. In recent years, there has been a growing awareness of the need for sustainable and eco-friendly practices for the treatment of dye-laden effluents. Overall, this study highlights the potential of bioremediation as a sustainable solution for wastewater treatment. The Bacillus mojavensis isolated from wastewater and identified using 16S rRNA degraded reactive yellow 145 and methyl orange in 36 h of incubation, this decolorization was affected by pH, temperature, dye concentration, glucose concentration, source of nitrogen, type of dye, and agitation. Our study found that the optimal conditions for total decolorization of dyes were achieved by incubating B. mojavensis at 46 °C, pH 9, with 1 g/L of glucose and 2 g/L of peptone. The azoreductase activity, FT-IR analysis, and UV-visible spectrum before and after total decolorization indicated that it was a dye degradation rather than biosorption in surface Celle. In addition, the study of phytotoxicity show the metabolites of degradation are not phytotoxic in Lens esculenta seeds. In conclusion, our results suggest the use of this bacterium as an environmentally friendly and also cost-effective method, making it an attractive option for industries looking to reduce their environmental impact.

g-C3N4 Based Photocatalyst for the Efficient Photodegradation of Toxic Methyl Orange Dye: Recent Modifications and Future Perspectives

Industrial effluents containing dyes are the dominant pollutants, making the drinking water unfit. Among the dyes, methylene orange (MO) dye is mutagenic, carcinogenic and toxic to aquatic organisms. Therefore, its removal from water bodies through effective and economical approach is gaining increased attention in the last decades. Photocatalytic degradation has the ability to convert economically complex dye molecules into non-toxic and smaller species via redox reactions, by using photocatalysts. g-C₃N₄ is a metal-free n-type semiconductor, typical nonmetallic and non-toxici polymeric photocatalyst. It widely used in photocatalytic materials, due to its easy and simple synthesis, fascinating electronic band structure, high stability and abundant availability. As a photocatalyst, its major drawbacks are its limited efficiency in separating photo-excited electron-hole pairs, high separated charge recombination, low specific surface area, and low absorption coefficient. In this review, we report the recent modification strategies adopted for g-C₃N₄ for the efficient photodegradation of MO dye. The different modification approaches, such as nanocomposites and heterojunctions, as well as doping and defect introductions, are briefly discussed. The mechanism of the photodegradation of MO dye by g-C₃N₄ and future perspectives are discussed. This review paper will predict strategies for the fabrication of an efficient g-C₃N₄-based photocatalyst for the photodegradation of MO dye.

Transformation of used aluminium foil food container into AlOOH nanoflakes with high catalytic activity in anionic azo dye reduction

Synthesis of aluminium-based nanomaterials from aluminium-waste has received huge attention in current scientific research. Herein, an attempt was made to convert aluminium foil food container into aluminium oxyhydroxide (AlOOH) nanoparticles by a precipitation method. X-ray diffraction (XRD), spectroscopic and electron microscopic studies were employed to characterize impure AlOOH (containing sodium chloride, NaCl) and pure AlOOH samples. The band gap (E_g) of AlOOH nanoparticles was found to be 4.5 eV. The catalytic potential of AlOOH samples was evaluated using reduction of methyl orange (MO) and Eriochrome black T (EBT) dyes. Impure AlOOH nanoparticles could reduce 99.8% of MO and EBT dye within 4 min and 3 min respectively. Effect of the AlOOH dosage and NaBH₄ concentration on catalytic reduction was determined. Used aluminium foil food container-derived AlOOH nanoparticles will become a low-cost and sustainable catalyst in the catalytic treatment of azo dye contaminated waters.

Tuning cationic/anionic dyes sorption from aqueous solution onto green algal biomass for biohydrogen production

Global water security and energy demands associated with uncontrollable population growth and rapid industrial progress are one of the utmost serious needs dangerously confronting humanity. On account of waste as a wealth strategy; a multifunctional eco-friendly sorbent (MGAP) from green alga was prepared successfully for remediation of cationic/anionic organic dyes and biohydrogen production. The structural and morphological properties of sorbent were systematically scrutinized by a variety of spectral analyses. The loading capacity of MGAP towards rhodamine B (RhB) and methyl orange (MO) dyes was inclusivity inspected under variable experimental conditions. The adsorption kinetics of both dyes onto MGAP was in good agreement with pseudo-second-order theory, whereas adsorption isotherms could fit well with the Langmuir model, with satisfactory loading capacities of 144.92 and 196.04 mg g^-1 for RhB and MO molecules, respectively. Moreover, ultra-sonication treatment admirably decreased the sorption equilibrium time from 180.0 min to 30.0 min. Furthermore, spent sorbent was managed particularly for biohydrogen production with a measured yield of 112.89, 116.59, and 128.17 mL-H₂/gVS for MGAP, MGAP-MO, and MGAP-RhB, respectively. Overall, the produced MGAP can potentially be offered up as a promising dye scavenger for wastewater remediation and biohydrogen production, thereby fulfilling waste management and circular economy.

Fungal assisted bio-treatment of environmental pollutants with comprehensive emphasis on noxious heavy metals: Recent updates

In the present time of speedy developments and industrialization, heavy metals are being uncovered in aquatic environment and soil via refining, electroplating, processing, mining, metallurgical activities, dyeing and other several metallic and metal based industrial and synthetic activities. Heavy metals like lead (Pb), mercury (Hg), cadmium (Cd), arsenic (As), Zinc (Zn), Cobalt (Co), Iron (Fe), and many other are considered as seriously noxious and toxic for the aquatic environment, human, and other aquatic lives and have damaging influences. Such heavy metals, which are very tough to be degraded, can be managed by reducing their potential through various processes like removal, precipitation, oxidation-reduction, bio-sorption, recovery, bioaccumulation, bio-mineralization etc. Microbes are known as talented bio-agents for the heavy metals detoxification process and fungi are one of the cherished bio-sources that show noteworthy aptitude of heavy metal sorption and metal tolerance. Thus, the main objective of the authors was to come with a comprehensive review having methodological insights on the novel and recent results in the field of mycoremediation of heavy metals. This review significantly assesses the potential talent of fungi in heavy metal detoxification and thus, in environmental restoration. Many reported works, methodologies and mechanistic sights have been evaluated to explore the fungal-assisted heavy metal remediation. Herein, a compact and effectual discussion on the recent mycoremediation studies of organic pollutants like dyes, petroleum, pesticides, insecticides, herbicides, and pharmaceutical wastes have also been presented.

Screening and identification of azo dye decolorizers from mangrove rhizospheric soil

Removal of synthetic textile dyes poses a challenge to the textile industry and a threat to the environment's flora and fauna. These dyes are recalcitrant and not very amenable to physical and chemical techniques of degradation. Hence, several studies on alternative bioremediation methods involving plants, plant roots, single microbes, or a consortium of microbes for the decolorization of dyes have been carried out. In the present study, potent bacteria for dye decolorization were isolated from rhizospheric soil of mangrove plants collected from Kamothe, Navi Mumbai, India. Of the 20 isolates obtained after enrichment, seven isolates were used for further screening of efficient decolorization ability in minimal basal media containing 10% glucose, 2.5% trace metal solution, and 0.1% of Methyl Orange (MO) dye concentration. Physiological parameters to optimize the decolorization of dye at optimum pH, temperature, and incubation time were studied for all the seven isolates. UV-vis and Fourier transform infrared spectroscopy were used to investigate dye decolorization. The seven isolates were characterized morphologically, biochemically, and molecular identification of these bacterial isolates was performed by 16S rRNA sequence analysis. The isolates were identified as Bacillus paramycoides, Pseudomonas taiwanensis, Citrobacter murliniae, Acinetobacter pitti, Exiguobacterium acetylicum, Psychrobacter celer, and Aeromonas taiwanensis. Out of these, Aeromonas taiwanensis has shown exceptional capacity by ~ 100% decolorization of azo dye in minimum time.

Biodegradation of Congo Red Using Co-Culture Anode Inoculum in a Microbial Fuel Cell

Congo red is an azo dye widely used as a colouring agent in textile industries. It is a serious threat due to its carcinogenic effects. Its degradation has been challenging due to its complex yet stable structure. The present study was aimed to investigate the effective degradation of Congo red by bioremediating bacteria isolated from different environments. To investigate predominant microorganisms that degrade Congo red and its functions in microbial fuel cells (MFCs), strains isolated from cow dung (Enterococcus faecalis SUCR1) and soil (Pseudomonas aeruginosa PA1_NCHU) were used as a co-culture inocula. The remarkable results establish that E. faecalis as an excellent microbial source for the biological degradation of dye-contaminated wastewater treatment alongside bioactive treating wastewater with varied concentrations of congo red dye. The highest efficiency percentage of dye degradation was 98% after 3 days of incubation at pH 7 and 37 °C, whereas findings have shown that the decolorization at pH 5 and 6 was lower at 66% and 83.3%, respectively, under the same incubation conditions. Furthermore, the co-culture of E. faecalis SUCR1 and P. aeruginosa at a 1:1 ratio demonstrated improved power generation in MFCs. The maximum power density of 7.4 W/m3 was recorded at a 150 mg L−1 concentration of Congo red, indicating that the symbiotic relation between these bacterium resulted in improved MFCs performance simultaneous to dye degradation.

Activated Carbon/ZnFe2O4 Nanocomposite Adsorbent for Efficient Removal of Crystal Violet Cationic Dye from Aqueous Solutions

The aim of this study was to investigate the potential advantage of ZnFe₂O₄-incorporated activated carbon (ZFAC), fabricated via a simple wet homogenization, on the removal of cationic dye crystal violet (CV) from its aqueous solutions. The as-prepared ZFAC nanocomposite was characterized using Fourier transform infrared (FTIR), X-ray diffraction (XRD), nitrogen adsorption, scanning electron microscope (SEM), thermogravimetric analysis (TGA), and ultraviolet-visible (UV-Vis). Batch adsorption operating conditions such as the pH (3-11), CV concentration (25-200 ppm), ZFAC dose (10-50 mg), temperature (23-45 °C), and contact time were evaluated. The results indicate pH-dependent uptake (optimum at pH 7.2) increased with temperature and CV concentration increase and decreased as adsorbent dose increased. Modeling of experimental data revealed better fit to the Langmuir than Freundlich and Temkin isotherms, with maximum monolayer capacities (Q_m) of 208.29, 234.03, and 246.19 mg/g at 23, 35, and 45 °C, respectively. Kinetic studies suggest pseudo-second order; however, the intra-particle diffusion model indicates a rate-limiting step controlled by film diffusion mechanism. Based on the thermodynamic parameters, the sorption is spontaneous (-ΔG°), endothermic (+ΔH°), and random process (+ΔS°), and their values support the physical adsorption mechanism. In addition to the ease of preparation, the results confirm the potential of ZFAC as a purifier for dye removal from polluted water.

Decolorization of safranin using Fissidens species and its ecotoxicological assessments: An in vitro and in silico approach

Decolorization of safranin was investigated using Fissidens species in a batch system under optimized conditions. The decolorization efficiency was improved by optimizing the conditions such as initial pH (3-9), temperature (25-45 °C), initial dye concentration (10-50 mg/L), biosorbent dosage (100-500 mg/L) and contact time (1-6 days). Maximum decolorization (95%) was recorded at initial pH of 6 with dye concentration of 20 mg/L, biosorbent dosage of 200 mg/L at 30 °C and contact time of 2 days. Desorption studies revealed 0.1 N NaOH as the best desorbing agent with 92% recovery on third day. Experimental data well fitted to Langmuir isotherm and Pseudo-second order kinetic model. The negative values of ΔG^o and positive value of ΔS^o and ΔH^o indicates that the reaction is spontaneous, favorable and endothermic. The biosorbent - dye interactions were confirmed using UV-Vis, FT-IR, XRD and FE-SEM with EDX studies. The detoxified nature of the dye degraded metabolites was confirmed by the significant growth of green gram. The color fastness and color strength of the fabrics dyed using Fissidens species treated dye solution were compared with the tap water dyed fabrics which indicated the reuse potential of treated water in textile sector. The decolorization efficiency was further confirmed through in silico approach, where safranin well docked with the active sites of Photosystem II protein D1 of the Fissidens species. Thus, the present study proves that Fissidens species is a promising biosorbent for safranin decolorization and will lay a platform for the control and management of environmental pollution.

Synthesis and Characterization Bimetallic Organic Framework CoxFex(BDC) and Adsorption Cationic and Anionic Dyes

Co-doped Fe-MOF bimetallic organic framework materials at different ratios were synthesized based on the solvothermal method, and we evaluated their morphological characteristics by modern analytical methods such as SEM, XRD, FT-IR, and isotherm of nitrogen adsorption-desorption (BET). The specific surface area of the 0.3 CoFe-MOF sample (280.9 m2/g) is much larger than the Fe-MOF and samples at other ratios. The post-synthesized materials were evaluated for their ability to absorb various dyes, including Methylene Blue (MB), Methyl orange (MO), Congo red (CR), and Rhodamine (RhB), and evaluated for the effects of pH, the initial concentration of the dye solution, time, and dose of adsorbent. The results show that the 0.3 CoFe-MOF material has a high adsorption capacity that is superior to both the original Fe-MOF and the CoFe-MOFs at other ratios. The highest adsorption capacity of MB dye by 0.3 CoFe-MOF reaches up to 562.1 mg/g at pH 10, the initial concentration of MB of 200 mg/L, after 90 min. The charged properties of the dyes and the charged nature of the bimetallic organic frameworks are best demonstrated through the adsorption of dye mixtures. The adsorption efficiency on the mixed system of cationic (MB) and anionic (MO) dyes yielded the highest removal efficiency of 70% and 81%, respectively, after 30 min. Therefore, the research has opened up the potential application of M/Fe-MOF modified materials and CoFe-MOF in organic dyes adsorption in wastewater treatment for environmental protection.

Light driven Aspergillus niger-ZnS nanobiohybrids for degradation of methyl orange

Inorganic-microbial hybrid systems have potential to be sustainable, efficient and versatile chemical synthesis platforms by integrating the light-harvesting properties of semiconductors with microbial cells. Here, we demonstrate light-driven photocatalytic semiconducting Aspergillus niger cells-ZnS nanoparticles for enhanced removal of the dye methyl orange. Chemically synthesized ZnS nanoparticles exhibited a zinc blende pattern in X-ray diffraction, had a dimension of 20-90 nm with a band gap (E_bg) of 3.4 eV at 1.83 × 10¹⁸ photons/second. Biologically synthesized ZnS nanoparticles of 40-90 nm showed a hexagonal pattern in the X-ray powder diffraction spectra with an E_bg 3.7 eV at 1.68 × 10¹⁸ photons/second. At a methyl orange (MO) concentration of 100 mg/L, dosage of 0.5 × 10⁵ mol catalyst and pH 4, a 97.5% and 98% removal efficiency of MO was achieved in 90 min and 60 min for, respectively, chemically and biologically synthesized ZnS nanobiohybrids in the presence of UV-A light. The major degradation products of photocatalysis for chemically synthesized ZnS nanobiohybrids were naphtholate (C₁₀H₇O m/z 143) and hydroquinone (C₉H₅m/z 113). For the biologically synthesized ZnS nanobiohybrids, the degradation products were hydroquinone (C₉H₅m/z 113) and 2-phenylphenol (C₁₂H₁₀O m/z 170).

Synthetic azo dye bio-decolorization by Priestia sp. RA1: process optimization and phytotoxicity assessment

Azo compounds represent the most diverse group of colorants widely employed in industrial sectors. Being highly toxic and recalcitrant compound, azo dyes pose a threat to plants, animals, and humans. In the present report, bio-decolorization of azo dye, reactive black 5, was evaluated by newly isolated Priestia sp. RA1. Strain RA1 was able to decolorize 97% of 100 ppm reactive black 5 in 60 h. Specific activity of dye decolorization was found to be 0.233 μmol min^-1 g^-1 dry cells. Successful decolorization over a broad range of pH, salinity, temperature, and initial dye concentration was observed. Phytotoxicity assay on agriculturally important crops showed considerable difference in percentage seed germination and growth when treated with original and bio-decolorized dye samples. Bio-decolorization at high dye concentrations, promising decolorization rate, and non-toxic nature of treated products suggest the potential of strain RA1 for bioremediation of dye-contaminated water and its re-use in the industries.

Microbial Degradation of Azo Dyes: Approaches and Prospects for a Hazard-Free Conversion by Microorganisms

Azo dyes have become a staple in various industries, as colors play an important role in consumer choices. However, these dyes pose various health and environmental risks. Although different wastewater treatments are available, the search for more eco-friendly options persists. Bioremediation utilizing microorganisms has been of great interest to researchers and industries, as the transition toward greener solutions has become more in demand through the years. This review tackles the health and environmental repercussions of azo dyes and its metabolites, available biological approaches to eliminate such dyes from the environment with a focus on the use of different microorganisms, enzymes that are involved in the degradation of azo dyes, and recent trends that could be applied for the treatment of azo dyes.

Methyl Orange Biodegradation by Immobilized Consortium Microspheres: Experimental Design Approach, Toxicity Study and Bioaugmentation Potential

Methyl orange (MO) is categorized among the recalcitrant and refractory xenobiotics, representing a significant burden in the ecosystem. To clean-up the surrounding environment, advances in microbial degradation have been made. The main objective of this study was to investigate the extent to which an autochthonous consortium immobilized in alginate beads can promote an efficient biodegradation of MO. By employing response surface methodology (RSM), a parametric model explained the interaction of immobilized consortium (Raoultella planticola, Ochrobactrum thiophenivorans, Bacillus flexus and Staphylococcus xylosus) to assimilate 200 mg/L of MO in the presence of 40 g/L of NaCl within 120 h. Physicochemical analysis, including UV-Vis spectroscopy and FTIR, and monitoring of the degrading enzymes (azoreductase, DCIP reductase, NADH reductase, laccase, LiP, MnP, nitrate reductase and tyrosinase) were used to evaluate MO degradation. In addition, the toxicity of MO-degradation products was investigated by means of phytotoxicity and cytotoxicity. Chlorella vulgaris retained its photosynthetic performance (>78%), as shown by the contents of chlorophyll-a, chlorophyll-b and carotenoids. The viability of normal lung and kidney cell lines was recorded to be 90.63% and 99.23%, respectively, upon exposure to MO-metabolic outcomes. These results reflect the non-toxicity of treated samples, implying their utilization in ferti-irrigation applications and industrial cooling systems. Moreover, the immobilized consortium was employed in the bioremediation of MO from artificially contaminated agricultural and industrial effluents, in augmented and non-augmented systems. Bacterial consortium remediated MO by 155 and 128.5 mg/L in augmented systems of agricultural and industrial effluents, respectively, within 144 h, revealing its mutual synergistic interaction with both indigenous microbiotas despite differences in their chemical, physical and microbial contents. These promising results encourage the application of immobilized consortium in bioaugmentation studies using different resources.

Statistical modeling of methylene blue degradation by yeast-bacteria consortium; optimization via agro-industrial waste, immobilization and application in real effluents

The progress in industrialization everyday life has led to the continuous entry of several anthropogenic compounds, including dyes, into surrounding ecosystem causing arduous concerns for human health and biosphere. Therefore, microbial degradation of dyes is considered an eco-efficient and cost-competitive alternative to physicochemical approaches. These degradative biosystems mainly depend on the utilization of nutritive co-substrates such as yeast extract peptone in conjunction with glucose. Herein, a synergestic interaction between strains of mixed-culture consortium consisting of Rhodotorula sp., Raoultella planticola; and Staphylococcus xylosus was recruited in methylene blue (MB) degradation using agro-industrial waste as an economic and nutritive co-substrate. Via statistical means such as Plackett-Burman design and central composite design, the impact of significant nutritional parameters on MB degradation was screened and optimized. Predictive modeling denoted that complete degradation of MB was achieved within 72 h at MB (200 mg/L), NaNO3 (0.525 gm/L), molasses (385 μL/L), pH (7.5) and inoculum size (18%). Assessment of degradative enzymes revealed that intracellular NADH-reductase and DCIP-reductase were key enzymes controlling degradation process by 104.52 ± 1.75 and 274.04 ± 3.37 IU/min/mg protein after 72 h of incubation. In addition, azoreductase, tyrosinase, laccase, nitrate reductase, MnP and LiP also contributed significantly to MB degradation process. Physicochemical monitoring analysis, namely UV-Visible spectrophotometry and FTIR of MB before treatment and degradation byproducts indicated deterioration of azo bond and demethylation. Moreover, the non-toxic nature of degradation byproducts was confirmed by phytotoxicity and cytotoxicity assays. Chlorella vulgaris retained its photosynthetic capability (˃ 85%) as estimated from Chlorophyll-a/b contents compared to ˃ 30% of MB-solution. However, the viability of Wi-38 and Vero cells was estimated to be 90.67% and 99.67%, respectively, upon exposure to MB-metabolites. Furthermore, an eminent employment of consortium either freely-suspended or immobilized in plain distilled water and optimized slurry in a bioaugmentation process was implemented to treat MB in artificially-contaminated municipal wastewater and industrial effluent. The results showed a corporative interaction between the consortium examined and co-existing microbiota; reflecting its compatibility and adaptability with different microbial niches in different effluents with various physicochemical contents.

Simultaneous anaerobic decolorization/degradation of Reactive Black-5 azo dye and chromium(VI) removal by Bacillus cereus strain MS038EH followed by UV-C/H2O2 post-treatment for detoxification of biotransformed products

The existence of synthetic dyes and heavy metals in textile wastewater is a serious problem. These compounds should be removed before discharge into the environment by an appropriate method. The present study was conducted for the characterization of efficient multi-functional strain Bacillus cereus MS038EH for the simultaneous removal of Reactive Black-5 and Chromium(VI). Maximum decolorization efficiency of 94.74% was achieved at pH 7, 35 °C, and 4% inoculum size for 900 mg/L of Reactive Black-5. Also, 94.10% efficiency was observed in the presence of 8 g/L of yeast extract as an optimum nitrogen source, while carbon sources had no significant effect on decolorization. It should be pointed out that the decolorization efficiency was decreased from 94 to 64% by increasing NaCl concentrations from 0 to 50 g/L, respectively. Bacillus cereus strain MS038EH could decolorize 94.31% of Reactive Black-5 (900 mg/L) and remove 87.31% of chromium(VI) (30 mg/L) within 36 h. Results of Gas chromatography-mass spectrometry and Fourier transform-infrared spectroscopy proved that Reactive Black-5 was cleaved into the lower molecular weight products without any azo bonds. However, the phyto-toxicity analysis showed that Reactive Black-5 was not toxic for Triticum aestivum and Maize, while biologically treated Reactive Black-5 was toxic for seeds. Therefore, ultraviolet-C/H₂O₂ was applied for the detoxification of biotransformed products. When ultraviolet-C/H₂O₂ was applied as post-treatment, the seeds were germinated completely. It is demonstrated that the application of ultraviolet-C/H₂O₂ after anaerobic treatment is effective for toxicity reduction of textile wastewater.

Synthetic dyes degradation using lignolytic enzymes produced from Halopiger aswanensis strain ABC_IITR by Solid State Fermentation

The present work focuses on studying the degradation of industrial synthetic dyes, which poses serious health hazards and a drastic impact on the environment. Currently available enzymatic processes have higher production and operational costs. However, most enzymes are active at acidic pH, which limits its application in textile dye degradation. This problem can be overcome by lignolytic enzymes obtained from halo-alkaliphile through Solid State Fermentation (SSF) using wheat bran (agro-byproduct) as a substrate. The major lignolytic enzymes studied were Lignin Peroxidase (LiP), Manganese Peroxidase (MnP), and laccase. The results demonstrated the highest activity of 215.4 ± 1.57 of LiP, 36.8 ± 2.38 of MnP, and 8.34 ± 0.21 IU/gds of laccase. Crude enzymes were used to treat synthetic dyes (mainly azo dyes), and their potential for its degradation was confirmed by spectrophotometric, GC-MS, and HPLC analysis. The highest decolorization of 82-93% of Malachite Green (MG) was achieved in LiP and MnP mediated reaction system within 2 hours. The laccase reaction system showed degradation of 53.87% of methyl orange without adding any redox mediator. After obtaining these results, the crude LiP and MnP in the reaction system were further subjected to decolorization at a higher MG concentration of 100-600 mg/L without a redox mediator. As a result, both LiP and MnP decolorized MG by 72-89%. Further, GC-MS analysis of MG biodegradation products confirmed the formation of less toxic low molecular weight products such as benzaldehyde and methanone.

Adsorptive Performance of Polypyrrole-Based KOH-Activated Carbon for the Cationic Dye Crystal Violet: Kinetic and Equilibrium Studies

The aim of this work was to investigate the adsorptive performance of the polypyrrole-based KOH-activated carbon (PACK) in the removal of the basic dye crystal violet (CV) using a batch adsorption system. The equilibrium data, obtained at different initial CV concentrations ( $C_0=50–500\text{mg}/\text{L}$ ) and temperatures (25–45°C), were interpreted using the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms, with the Langmuir model providing a better fit ( $R^2\ge 0.9997$ ) and a maximum adsorption capacity of 497.51 mg/g at 45°C. Under the examined conditions, the values of the thermodynamic parameters free energy, enthalpy, and entropy indicate a spontaneous, endothermic, and physisorption adsorption process. The kinetic data of the adsorption process were very well described by a pseudo-second-order model ( $R^2\ge 0.9996$ ). However, surface diffusion seems to be the main rate-controlling step. Thus, we concluded that PACK shows commercial potential for the removal of cationic dyes such as CV from industrial effluent.

A critical review on advances in the practices and perspectives for the treatment of dye industry wastewater

Rapid industrialization has provided comforts to mankind but has also impacted the environment harmfully. There has been severe increase in the pollution due to several industries, in particular due to dye industry, which generate huge quantities of wastewater containing hazardous chemicals. Although tremendous developments have taken place for the treatment and management of such wastewater through chemical or biological processes, there is an emerging shift in the approach, with focus shifting on resource recovery from such wastewater and also their management in sustainable manner. This review article aims to present and discuss the most advanced and state-of-art technical and scientific developments about the treatment of dye industry wastewater, which include advanced oxidation process, membrane filtration technique, microbial technologies, bio-electrochemical degradation, photocatalytic degradation, etc. Among these technologies, microbial degradation seems highly promising for resource recovery and sustainability and has been discussed in detail as a promising approach. This paper also covers the challenges and future perspectives in this field.

Degradation and Toxicity Analysis of a Reactive Textile Diazo Dye-Direct Red 81 by Newly Isolated Bacillus sp. DMS2

An efficient diazo dye degrading bacterial strain, Bacillus sp. DMS2 was isolated from a long-term textile dye polluted environment. The strain was assessed for its innate ability to completely degrade and detoxify Direct Red 81 (DR81) textile dye under microaerophilic conditions. The degradation ability of strain showed significant results on optimizing the nutritional and environmental parameters. Based on statistical models, maximum efficiency of decolorization achieved within 24 h for 100 mg/l of dye supplemented with glucose (0.02%), MgSO₄ (0.002%) and urea (0.5%) at 30°C and pH (7.0). Moreover, a significant catabolic induction of a laccase and azoreductase suggested its vital role in degrading DR81 into three distinct metabolites (intermediates) as by-products. Further, toxicity analysis of intermediates were performed using seeds of common edible plants, aquatic plant (phytotoxicity) and the nematode model (animal toxicity), which confirmed the non-toxic nature of intermediates. Thus, the inclusive study of DMS2 showed promising efficiency in bioremediation approach for treating industrial effluents.

Augmented Biodegradation of Textile Azo Dye Effluents by Plant Endophytes: A Sustainable, Eco-Friendly Alternative

Textile industry consumes a large proportion of available water and releases huge amounts of toxic azo dye effluents, leading to an inevitable situation of acute environmental pollution that has been a significant threat to mankind. Decolorization or detoxification of harmful azo dyes has become a global priority to overcome the disastrous consequences and salvage the ecosystem. Biodegradation of textile azo dyes by endophytes stands to be a lucrative and viable alternative over conventional physico-chemical methods, owing to their eco-friendliness, cost-competitive and non-toxic nature. Especially, plant endophytic microbes exhibit promising biodegradation potential which has wired up the effective removal of textile azo dyes, attributing to their ability to produce dye degrading enzymes, laccases, peroxidases and azoreductases. Although both bacterial and fungal endophytes have been tried for azo dye degradation, endophytic fungi find broader application over bacteria. Despite of the advancements made in microbe-mediated biodegradation, there is still a need to fill the gap in lab to in situ translation of biodegradation research. This review concisely accentuates the xenobiotics of textile azo dyes and microbial mechanisms of biodegradation of textile azo dyes, positing plant endophytic community, especially bacterial and fungal endophytes as the potential dye degraders, highlighting currently reported dye degrading endophytic species.

Comparison between Allura Red dye discoloration by activated carbon and azo bacteria strain

Azo dyes are extensively used in different industries areas, such as Allura Red (R-40). Previous studies have proven its carcinogenic and mutagenic properties. For the removal of this type of emerging pollutant from effluents, tertiary treatment techniques such as activated charcoal are used. Alternatively, the use of bacteria is preferred because of its quick discoloration processes. The aim of the present investigation is to compare the efficiency removal of R-40 from aqueous media by a physicochemical process and a biological one. The sorption kinetics of 10 ppm of R-40 was carried out with the use of activated charcoal based on walnut shells in water. Moreover, Pseudomonas aeruginosa and Bacillus subtilis stains were used separately to decolorize nutrient broth media supplemented with 50 ppm of R-40. The activated carbon was capable to remove 99.87% of R-40 at 264 h, while the bacterial strains decolorized 92.13% (P. aeruginosa) and 88.21% (B. subtilis), respectively, under microaerophilic conditions after 168 h. Therefore, both process strategies, physicochemical and biological rapprochements, were able to remove the dye from aqueous media. R-40 was not cytotoxic to used strains, besides gram-positive either negative bacteria could be applied to turn over this azo dye in short term. Combination of both approaches may be implemented in tandem architecture.

Elucidation of fungal dye-decolourizing peroxidase (DyP) and ligninolytic enzyme activities in decolourization and mineralization of azo dyes

AIM

The aim of the study is to investigate the efficiency of Geotrichum candidum in the decolourization and mineralization of synthetic azo dyes.

METHODS AND RESULTS

It includes screening of enzymes from G. candidum and its optimization, followed by decolourization and mineralization studies. Decolourization was observed to be maximum in methyl orange (94·6%) followed by Congo red (85%), trypan blue (70·4%) and Eriochrome Black T (55·6%) in 48 h, suggesting the plausible degradation of the azo dyes by G. candidum. The enzyme activity study showed that DyP-type peroxidase has highest activity of 900 mU ml^-1 compared to that of laccase (405 mU ml^-1 ) and lignin peroxidase (LiP) (324 mU ml^-1 ) at optimized pH (6) and temperature (35°C). Moreover, the rate of decolourization was found to be directly proportional to the production of laccase and LiP, unlike DyP-type peroxidase. Furthermore, mineralization study demonstrated reduction in aromatic amines, showing 20% mineralization of methyl orange.

CONCLUSION

Geotrichum candidum with its enzyme system is able to efficiently decolourize and mineralize the experimental azo dyes.

SIGNIFICANCE AND IMPACT OF THE STUDY

The efficient decolourization and mineralization of azo dyes makes G. candidum a promising alternative in the treatment of textile effluent contaminated with azo dyes.

Spectroscopic investigation on photocatalytic degradation of methyl orange using Fe2O3/WO3/FeWO4 nanomaterials

In this study, iron oxide (Fe₂O₃), tungsten oxide (WO₃) and iron-tungstate oxide (FeWO₄) nanoparticles (NPs) were synthesized by simple precipitation, acid precipitation, and hydrothermal method respectively. All the spectroscopic analysis reveals that as-synthesized NPs are crystalline with a z-average size of 342, 313 and 373 d.nm respectively. The element compositions, shape and size of the NPs were identified with the help of SEM with EDX analysis. FTIR analysis concluded that the presence of functional groups on the surface of NPs and which responsible for capping and formation of NPs. Besides, the as-synthesized NPs have been used as a photocatalyst for the degradation of Methyl Orange (MO) dye under visible irradiation. FeWO₄ NPs (98%) show more effective in the degradation of MO as compared to other NPs. Moreover, the degraded MO and its by-products were used to assess their toxicity on Vigna radiata and RAW 264.7 cell line and which were confirmed that degraded by-products were non-hazardous.

High Throughput Sediment DNA Sequencing Reveals Azo Dye Degrading Bacteria Inhabit Nearshore Sediments

Estuaries and coastal environments are often regarded as a critical resource for the bioremediation of organic pollutants such as azo dyes due to their high abundance and diversity of extremophiles. Bioremediation through the activities of azoreductase, laccase, and other associated enzymes plays a critical role in the removal of azo dyes in built and natural environments. However, little is known about the biodegradation genes and azo dye degradation genes residing in sediments from coastal and estuarine environments. In this study, high-throughput sequencing (16S rRNA) of sediment DNA was used to explore the distribution of azo-dye degrading bacteria and their functional genes in estuaries and coastal environments. Unlike laccase genes, azoreductase (azoR), and naphthalene degrading genes were ubiquitous in the coastal and estuarine environments. The relative abundances of most functional genes were higher in the summer compared to winter at locations proximal to the mouths of the Hanjiang River and its distributaries. These results suggested inland river discharges influenced the occurrence and abundance of azo dye degrading genes in the nearshore environments. Furthermore, the azoR genes had a significant negative relationship with total organic carbon, Hg, and Cr (p < 0.05). This study provides critical insights into the biodegradation potential of indigenous microbial communities in nearshore environments and the influence of environmental factors on microbial structure, composition, and function which is essential for the development of technologies for bioremediation in azo dye contaminated sites.

Adsorption of Azo Dye Methyl Orange from Aqueous Solutions Using Alkali-Activated Polypyrrole-Based Graphene Oxide

The adsorption of methyl orange (MO) from aqueous solutions onto a KOH-activated polypyrrole-based adsorbent (PACK) was investigated using batch and fixed-bed column techniques. The structural, thermal, and morphological properties of the PACK, analyzed by various methods, support its applicability as an adsorbent. An adsorption kinetic study revealed a preferably pseudo-second-order (R² = 0.9996) and rate-limiting step controlled by both film and intra-particle diffusions. The thermodynamic adsorption tests resulted in negative ΔG°, ΔH°, and ΔS° values, which decreased as the temperature and concentration increased, indicating the spontaneous and exothermic adsorption over 25–45 °C. The adsorption isotherms fit the experimental data in the order of Langmuir ≈ Freundlich > Temkin, with evidence of adsorption operating well via the monolayer physical adsorption process, and maximum monolayer adsorption ranging from 520.8 to 497.5 mg/g. The breakthrough curve of the fixed-bed column experiment was modeled using the Thomas, Yoon–Nelson, and Hill models, resulting in an equilibrium capacity of 57.21 mg/g. A 73% MO recovery was achieved, indicating the possibility of column regeneration. Compared to other adsorbents reported, PACK had comparable or even superior capacity toward MO. For cost-effectiveness, similar nitrogen-containing polymeric wastes could be exploited to obtain such excellent materials for various applications.